Вы находитесь на странице: 1из 4

Firmware Release Notes

Model Name: DSL-2750U

Firmware: ME_1.11 (internal version: GAN9.9T113A-B-DL-DSL2750U-R5B0024-


Dubai.EN_2T2R_text_for_lan)
Hardware: GAN9.9T113A-B
Date: 2013.10.24

Problems Resolved:
1、 DBG13040408 TCP session not over 60% of spec
2、 DBG13050188 WAN Statistics show Received data is much less than actual received
3、 DBG13050194 interface lable show unknow type
4、 DBG13050284 PC can't receive SSDP packet without disable Enable MultiAP Isolation
5、 DBG13030236 The first time DUT can disconnect the PPPoE connection but the function can't
work twice
6、 DBG13030275 Virtual server auto-fill IP not change when DUT lan subnet changed and it can
save different subnet IP with DUT lan
7、 DBG13030328 WinXP client can't authenticate successfully when DUT is using 802.11g WEP
encryption
8、 DBG13030348 Windows 7 can't connect to DUT sucessfully
9、 DBG13050185 DUT not disconnect PPPoE after 5min inactivity
10、 DBG13050249 When we config UDP 53 portforwarding,DUT will show error message, please
refer to attachment
11、 DBG13050289 Lan Access control can't specify allow IP
12、 ETTH WAN speed is very low
Enhancements:
None
Known Issues:

Other problems: (Some of these problems are tested fine from our lab, others are test method issues. Please see D-
Lab system for detailed information.))

D-Link Corporation confidential


Firmware: ME_1.11 (internal version: GAN9.9T113A-B-DL-DSL2750U-R5B0024-
Dubai.EN_2T2R_text)
Hardware: GAN9.9T113A-B
Date: 2013.8.6

Problems Resolved:
1、 About 3G port forwarding, Yes we need clarifications for only port forward on 3G connection.
Enhancements:
None
Known Issues:
DBG13040408 TCP session not over 60% of spec
DBG13050188 WAN Statistics show Received data is much less than actual received
DBG13050194 interface lable show unknow type
DBG13050284 PC can't receive SSDP packet without disable Enable MultiAP Isolation

Other problems: (Some of these problems are tested fine from our lab, others are test method issues. Please see D-
Lab system for detailed information.))

DBG13030236 The first time DUT can disconnect the PPPoE connection but the function can't work
twice
DBG13030275 Virtual server auto-fill IP not change when DUT lan subnet changed and it can save
different subnet IP with DUT lan
DBG13030328 WinXP client can't authenticate successfully when DUT is using 802.11g WEP
encryption
DBG13030348 Windows 7 can't connect to DUT sucessfully
DBG13050185 DUT not disconnect PPPoE after 5min inactivity
DBG13050249 When we config UDP 53 portforwarding,DUT will show error message, please refer to
attachment
DBG13050289 Lan Access control can't specify allow IP

D-Link Corporation confidential


Firmware: ME_1.11 (internal version: GAN9.9T113A-B-DL-DSL2750U-R5B0024-Dubai.EN_2T2R)
Hardware: GAN9.9T113A-B
Date: 2013.7.19

Problems Resolved:
1、 DBG13030233 When select pppoe wan service and enter only one password then select MER
mode and finish set-up, DUT will show password not match
2、 DBG13030245 After config port mapping,MOD STB can't play vedio stream but can connect to
server.
3、 DBG13030250 Remote PC_B can't access Local server PC_A http ,ftp such services are the
same port with remote control
4、 DBG13030259 Log in web page not display properly
5、 DBG13030267 It always show Bridging when mouse cursor point all wan service
6、 DBG13030307 Can't add same website with 2 schedule
7、 DBG13030341 PC-B can ping Wired PC
8、 DBG13030350 If add PC A in MAC filter rule, after we change the PC A MAC address on the
rule, PC A still can't connect to internet
9、 DBG13030353 Can't apply Daylight saving cause DUT alway show time interval conflict
10、 DBG13030445 PC could not get IP address from DUT when BT programs are still running
11、 DBG13030446 Wireless client could open DUT web GUI and wen site when BT programs are
still running.
12、 DBG13030447 LAN PC could not open DUT web GUI and web site when BT programs are still
running
13、 DBG13050192 DUT not update wan IP to DYNDNS
14、 DBG13050247 DUT not responses to DHCP option6
15、 DBG13050250 All services (HTTP, SSH, FTP) over TCP execute loopback unccessfully
16、 DBG13050251 All services (DNS, TFTP) over UDP execute port forward unsuccessfully
17、 DBG13050252 Inbound TCP packets can't sent to DMZ host on few ports, please refer to
attachment
18、 DBG13050253 Inbound UDP packets can't sent to DMZ host for few ports, please refer to
attachment
19、 DBG13050254 Some packets of protocol can't be forwarded to the DMZ host
20、 DBG13050255 ICMP Echo Reply time out
21、 DBG13050256 Time out for waiting for ping response
22、 DBG13050268 Login web page will not show correct
23、 DBG13050279 The 3G IP address not be register on the DDNS Server

D-Link Corporation confidential


24、 DBG13050293 Can't sync time with NTP server
25、 DSL LED on the front panel must be off when the DSL cable is disconnected and it must not blink.
26、 Change the Backup delay time and Recovery delay time to 10 sec as default.
27、 Open the TR069 funtion
Enhancements:
None
Known Issues:
DBG13040408 TCP session not over 60% of spec
DBG13050188 WAN Statistics show Received data is much less than actual received
DBG13050194 interface lable show unknow type
DBG13050284 PC can't receive SSDP packet without disable Enable MultiAP Isolation

Other problems: (Some of these problems are tested fine from our lab, others are test method issues. Please see D-
Lab system for detailed information.))

DBG13030236 The first time DUT can disconnect the PPPoE connection but the function can't work
twice
DBG13030275 Virtual server auto-fill IP not change when DUT lan subnet changed and it can save
different subnet IP with DUT lan
DBG13030328 WinXP client can't authenticate successfully when DUT is using 802.11g WEP
encryption
DBG13030348 Windows 7 can't connect to DUT sucessfully
DBG13050185 DUT not disconnect PPPoE after 5min inactivity
DBG13050249 When we config UDP 53 portforwarding,DUT will show error message, please refer to
attachment
DBG13050289 Lan Access control can't specify allow IP

D-Link Corporation confidential

Вам также может понравиться