Академический Документы
Профессиональный Документы
Культура Документы
Description/Features:
tm tm
.7% by load weight is required for manufacturing of plastics with EcoPure . EcoPure is a unique formulation
proprietary to Bio-Tec Environmental consisting of Organic and other materials, which are covered in the MSDS.
Applications:
Recommended for extruding film and sheet (blown or cast), blow molding, injection molding and rotomolding products
and parts where cosmetics are hypercritical such as for consumer-visible product packaging.
Concentrate Properties
Physical Properties
QA: 10338
Type: BT-500V
Pellet Ct. Pell/Gram 47.25
Contamination -- NONE
Regulatory
gu Information
EcoPure TM is made only from FDA recognized materials and processes regulated according to 21CFR 175.300, 177.1200,
177.1350 and other sections.
Storage
ag Information
Although no known shelf life has been determined for this concentrate, Bio-Tec Environmental recommends that inventories
are rotated and used within 6 months of purchase for optimum performance. If less than a full, sealed package is used in one
session, the package should be resealed before storage because the pellets will absorb moisture if left to the open air for
extended periods of time.
Safety
ty Information
EcoPure TM is not known to contain hazardous materials as outlined by current OSHA regulations. Please refer to the MSDS
for additional safety information.
ag
Packaging Information
EcoPure TM is typically packaged in moisture barrier lined 55LB Bags for easy use and 750KG Gaylords/PalletBoxes.
The data and information represented herein refer to typical values obtained in our laboratories by the methods or apparatuses indicated, and should be
so considered. Since processing variables are a major factor in product performance, this information should serve only as a guide. Since customers'
testing conditions are outside our control, the reproducibility of our data in a customer's testing facility is not guaranteed. There is no implied warranty of
merchantability or fitness for a particular purpose. Establishing satisfactory performance of the additive for the intended application is the customer's sole
responsibility. No warranty is given concerning the existence or non-existence of any patents claiming any pertinent subject matter presented herein.
The Company assumes no obligation, express or implied, or liability for use of the information and data presented. Published AUG-2008
PHYSICAL PROPERTY TEST METHOD UNITS (SI) TYPICAL VALUE Melt Index (EVA Carrier) ASTM D-1238 190/2.16 G/
10 min. 15.0
In addition to the ingredients found above the following are listed for state right-to-know purposes.
INGREDIENTS:
No ingredients listed in this section.
Judgments as to the suitability of the information herein or the purchaser’s purposes are necessarily the purchaser’s responsibility.
Reasonable care has been taken in the preparation of the information, but Bio-Tec Environmental, extends no warranties, makes
no representations and assumes no responsibility as the accuracy or suitability of this information for any purchaser’s use or for
any consequence of its use.
NOTICE: Further information is available pertaining to the EcoPuretm plastic application, including independent 3rd party test
results. Please contact the front desk at 505-999-1160.