Академический Документы
Профессиональный Документы
Культура Документы
Lecture - 26
Two-port Network Parameters: Interrelationships and Applications
This is the twenty sixth lecture and we are continuing our discussion on 2 port network
parameters. Today’s topic would be interrelationships and applications of 2 port
parameters. Before I take the interrelationships we would like to work out a couple of
examples on ABCD parameters and 1 of them is the ideal transformer.
(Refer Slide Time: 01:25)
Square. So, this is equal to n square, square of the number of terms. That is why the ratio
is finite because the ratio the number of terms is finite. And in addition we indicate the
dots and we write the word ideal here. In addition to inductance is being infinite the
coefficient of coupling has to be 1 exactly 1. If the inductances are finite and the
coefficient of coupling is 1, we call it a perfect transformer. A perfect transformer
becomes ideal if L1, L2 and M all go to infinity; in such a manner that the ratio of L1 to
L2 is finite.
Now, as I have already pointed out an ideal transformer does not have impedance or
admittance matrices. Impedance and admittance matrices cannot be defined for an ideal
transformer because z11 is infinity. So, is y11 y22 of course, z22 also yes correct and
therefore, z and y parameters are not defined. Now, if I take the voltage current
relationships you will see that port h parameters and ABCD parameters can be defined.
The voltage current relationships are that V1 is equal to n times V2 and I1 is equal to
minus 1 over n I2, this is the relationship.
Now, let me write it down again V1 equals to n V2 and I1 is equal to minus 1 over n I2,
from which the ABCD parameters are obvious. You see for ABCD V1 is to be identified
with AV2 minus BI2 and I1 is to be identified with CV2 minus DI2 agreed. This is the
definition of ABCD parameters and therefore, for the ideal transformer the ABCD matrix
is simply if you compare this with this you see that A is simply equal to n B is 0 C is 0
and D is. 1 over n, 1 over n and you also notice that AB minus CD is equal to 1.
This has to be obeyed because the ideal transformer is a reciprocal device all right. If I
want the h parameters the definition of h parameters are that V1 is h11 I1 plus h12 I2.
Sir V2
V 2 agreed h12 V2 and I2 the other current is equal to h21 I1 plus h22 V2. So, can you
tell me what is the h matrix now, h matrix if you compare these relationship with this you
see V1 h11 would be 0 h11 is 0 h12 would be equal to n agreed h21.
Minus n.
0.
0 and you notice that h12 is indeed equal to minus h21 which is the condition for
reciprocity. So, if you write the voltage current relationship at the port if you are able to
do that a parameter should be obvious. And for an ideal transformer the only way to
describe it is either an h matrix or an ABCD matrix transmission matrix z and y
parameters do not exist.
Now, take an ideal transformer and understand why it is called a transformer if I have an
impedance z L here, the voltages are V1 I1 V2 I2 if it is terminated in ZL. And the ratio
is n is to 1 these are the dots then V1 is equal to n V2 I1 is equal to minus 1 over n I2.
And therefore, the input impedance V1 by I1 is simply equal to minus n squared V2 by
I2.
Now, if I transfer this minus sign here then; obviously, V2 by minus I2 is equal to ZL.
And therefore, input impedance Zin is equal to n squared ZL and this is Y it is called a
transformer not only transforms voltages and currents V2 is 1 by n times V1. Current I2
is equal to minus n times I1 it transforms voltages and current, it also transforms the
impedance. The secondary impedance z L is transformed into n squared times z L when
referred to the primary.
For example, if this is an inductance then if it is the inductance L then the effective
inductance looking at the primary shall be n squared times L. If this is a capacitance C
then the effective capacitance looked at from the primary would be C divided by n
squared. If it is a resistance R then it would be n square times R this is the property of a
transform.
The other example that I take for ABCD parameters is I do not know if I have done this
the pi network have I done this? ABCD parameters or did I derive the h parameters h we
derived. Let us derive the ABCD parameters V1 I1 V2 I 2. We wish to derive the ABCD
parameters our relationships is V1 equal to AV2 minus BI2 and I1 is equal to CV2 minus
DI2 all right.
To find the parameter B, well I can find another parameter from the same network you
notice that C is equal to I1 divided by V2 with I2 equal to 0. So, I can find out C by
connecting a current source I1 to the network YA YC YB. And then finding out the
voltage here with I2 equal to 0 this is open circuited.
Now, this can be very simply solved this current, this current is equal to I1 multiplied by
1 by YA divided by 1 by YA plus 1 by YB plus 1 by YC is that ok? This is this current,
current division between YA and YB in series with YC. And the voltage V2 the voltage
V2 then shall be equal to this current multiplied by 1 over YB. And therefore, V2 by I1 is
equal to V2 by I1 is equal to YC divided by YA YB plus YB YC plus YC YA. Is that ok?
Are the steps all right I have done it by inspection and therefore, C which is the reciprocal
of this C would be equal to YA YB plus YB YC plus YC YA divided by Y sub C, this is
the z parameter. To find the B and D parameters B and D parameters we have to make to
V2 equal to 0.
Then you have an YB and it is short circuited YC short circuited. So, this current must be
I2 all right. The first thing to find out is V1 by minus I2 which is obviously that should
be.
YC on the top.
On the top it is YC correct this is YC. So, what is V1? V1 by minus I2; obviously, this is
equal to 1 over YC Are the signs all right? V1 appears across YC the sign I2 opposes V1
and therefore, the negative sign is taken care of. And this must therefore, be B As far as
D is concerned D is I1 divided by minus I2. Now, minus I2 is; obviously, equal to I1
times yes YC divided by.
YA
Yes.
I just skipped 1 step and therefore, D is equal to I1 by minus I2. So, it is YC plus YA
divided by YC all right, I have found out all the parameters.
Yes sir.
It has to be, there is no other way. Suppose, in a problem with a reciprocal network three
of the parameters are given you can find the fourth agreed because you have this
relationship AD minus BC is equal to 1 all right. We next go to the relationships between
the parameters.
Interrelationships the most commonly used parameters are z and y and therefore, we start
with z and y and we write this matrix Z matrix as z11 z12 z21 and z22. And the Y matrix
as: y11 y12 y21 y22. The defining relations are that the voltage vector V1 V2. Yeah
pardon me. Would you please say loud?
Sure all right. The V matrix which is V1 V2 and the I matrix is I1 I2 these are vectors this
is a column vector this is a column vector. And if you recall the defining relation is that V
equal to Z I. The 2 equations that we wrote can be expressed in this form V1 equal to z11
I1 plus z12 I2 and V2 is equals to z21 I1 plus V22 I2. The other equation is that I equals
to Y matrix multiplied by the V vector all right. If I substitute equation 2 in equitation 1 2
in 1 what do I get?
(Refer Slide Time: 18:16)
I get V equal to z instead of I I write YV, this is this clear how I wrote this? Would I
repeat? What I have is V equal to Z I and I is Y matrix multiplied by V that is what I
wrote here. And therefore, this matrix is the same as this matrix the pre-multiplying
matrix must be an identity matrix. Therefore, Z Y must be the identity matrix U of
dimension 2 by 2 this is 2 by 2 this is 2 by 2. So, multiplication of 2 by 2 by 2 by 2 which
gives 2 by 2. What is the definition of the identity matrix?
Diagonal elements are one of diagonals are 0and similarly Y matrix must be the inverse
of the Z matrix. This is the interrelationships between Z and Y matrices provided the
inverse exists. And the condition for that is that Del Y the determinant of the Y matrix
must not be equal to 0, and the condition for this is that the determinant of the z matrix
must not be equal to 0. And if I look at if I look at the expanded version of these inverse
relationships.
(Refer Slide Time: 20:07)
That is z 11 z12 z21 z22 is equal to the inverse of y matrix if I look at this it is a 2 by 2
matrix very simple. I can write down the relationships immediately z11 shall be equal to
y22 divided by Del y z22 shall be equal to y11 divided by Del y. Z12 shall be equal to.
Minus sign.
Minus sign and y21 is equal minus z21 divided by Del C. Where Del stands for the
determinant of the particular matrix for example, Del y is equal to y11 y22 minus y12
y21. Now, what we have said about conversion of z to y or y to z. The other 2 matrices
that is the h and the ABCD; obviously, they do not obey inverse relationships because,
the variables are different the independent set of parameters is different. So, 1 has to
work out from ABCD from the from no what is it called ab initio. Ab initio means, going
back to the roots for example.
I will take only 1 example. Suppose, I want to convert the h parameters to the ABCD
parameters suppose, I want to convert this. Then, what I do is I write both the relationship
that is I write V1 h parameter relates V1 I2 to V1 I2 to I1 V2. So, h 1 one I1 plus h12 V2
and I2 equal to h21 I1 plus h22 V2. And I also write the ABCD parameters V1 I1 at the
dependent variables and this is AV2 minus BI2 1 must remember this and I1 equal to
CV2 minus DI2 all right.
So, what we have to do is express V1 in terms of V2 and I2. In other words, I have to
eliminate I1 from here and this is easily found from here I1 is I2 minus h22 V2 divided
by h21. Which incidentally, also gives me C and D if you compare these 2 do not you see
that I1 has been expressed in terms of I2 and V2. So, what is C?
Minus h22
There is a minus sign because there is a minus sign here all right. Now, if I substitute this
if I substitute this relation in the first 1. Then I get V1 equals to h11 by h21 I2 minus h22
V 2, this is the first term h11 I1 plus h12 V2. And if I look at this relationship and this 1
if I compare these 2 then I get the following equations for A and B.
A is the coefficient of V2 that is a that would be h12 minus h11 h22 divided by h21. And
B, B would be equal to minus h11 h22 divided by h21. Is it a minus sign?
You do not have h22 this is a redundant term. Is there a minus sign?
There is now let me write C and D also C was minus h22 by h21 and D was minus 1 over
h21. It appears that only this term does not come with a minus sign, but if you if you
simplify this, the denominator is minus Del h divided by h21 agreed. So, there is a
uniformity all come with a negative sign all of them have a denominator of h21 h21 h21
h21 h21. The 3 parameters BCD have a single term in the numerator h11 h22 1 whereas,
A has the total determinant of the h matrix.
This is the table that we get ultimately. This is the complete table where it does not
assume that the network is reciprocal. It is a general table and you should keep a copy of
this ready with you in working out problems on problems in network theory. Because,
you never know where you shall require a conversion this incorporates T to pi and pi to T
T to pi means z parameters to y parameters and pi to T is y to z parameters.
You see for example, the table is read like this the z matrix and the z matrix. So, this is
this gives the matrix z matrix. Is this visible on the monitor?
No.
No, what is the problem you tell me to the shift. Is that ok now? Z parameters z and z that
is the 1 1 is simply matrix. If you go from z if you wish to derive z from y the row is all z
parameters and the column is in terms of those parameters. If you want to find z from y
parameters, then you use this relation that is z11 is y22 by Del y z12 is minus y12 by Del
y as we have done already. Or let us say you want to find out z parameters from ABCD
parameters, then z1 z11 you A by C all right z12 is Del t by C Del t is simply AD minus
BC. Which is equal to 1 for reciprocal network, this is a general table and therefore, they
have used Del t.
Similarly, z21 is 1 by C and z22 is D by C and similarly for all other entries in the table.
This is a very important table and very useful table and I would advise that you keep it
ready for reference all right.
Any question?
From the book yeah course book any network theory any respectable network theory
book would have this table any respectable network theory book. But, be aware some of
the books particularly the Indian authors have many miss prints and it is better that you
take from course book all right.
The first 1 that I have is suppose I connect the voltage source here V1 and I want to find
out the voltage output voltage V 2; that is, my transfer function is V2 by V1 all right. The
parameters you can use any set of parameters, but the condition is that I2 equals to 0. If I2
equals to 0 then you know that V1 would be equal to I1 z11, If I work in terms of the z
parameters and V2 shall be equal to I1 times z21 that is correct because I2 equal to 0.
Therefore, my V2 by V1 is simply z21 by z11.
Can I explain you see my condition is this is kept open and therefore, I2 is 0.
Not implied condition there is a given condition given conditions if I connect something
here then; obviously, I2 shall not be equal to this. But what I want is opens circuit voltage
transfer function. If I2 is 0 then my z parameters give these 2 relations and therefore, I
find V2 by V1. Suppose, 1 is per say I do not know the z parameter I know the y
parameter and I do not want to convert fine. What I will do is I will write the equation for
I2 I2 is equal to 0 equal to y21 V1 plus y22 V2. And therefore, V2 by V1 is equal to
minus y21 divided by y22 all right.
I can find out in terms of z parameters or y parameter and since, I know the relationship
between z and any other set of parameters. What I will require is only to look at the table
to be able to convert this for example, in terms of ABCD parameters. All that I do is
substitute for z21 in terms of ABCD substitute for z11 in terms of ABCD or else I go
back to the roots. That is I write the defining equations put I2 equal to 0 and then what
ever V2 by V1 comes I accept it. Is this all right? This is the first example the simplest 1.
(Refer Slide Time: 33:07)
The second example well it is also very simple I have this well situation in which the
network N is driven by current generator I1. The output is short circuited I2 and what I
want to find out is I2 by I1; this is my transfer function. If I take z parameters let us say,
then in the second equation V2 is equal to 0 is equal to I1 z21 plus I2 z22. And therefore,
I2 by I1 would be equal to minus z21 divided by z22 agreed, as simple is that from the
second equation.
Or if I want in terms of the y parameters what I will do is I take the 2 equations I1 shall
be V1 Y11 because V2 is 0 and I2 is V1 y21 all right therefore, I2 by I1 is equal to y21
divided by y 1 no negative sign. Similarly, I can find out from any other set of parameters
I will confine my attention to z and y other parameters you can try for yourself.
(Refer Slide Time: 34:45)
The third example that I take is slightly more involved that is a terminated network I have
a network N I can connect either source here. But all that matters is V1 and I1 and I
terminate this by means of resistance let us say R. The function of interest is I2 by V1 if
capital R was replaced by a voltage source V 2. Then what would have I2 by V1 become?
What would you like me to try, z parameters or y parameters? Let us find this out then we
will conclude let us use y parameters. Are they easy to use? Well either of them is easy
there is no problem. Why do I use y parameters?
Minus V2 by R that is perfectly all right that is what we shall use you see I2 is y21 V1 I
want I2 by V1 I2 is y21 V1 plus y22 V2. But what is V2?
Minus I2 R.
Now, I2 by V1 is also a transfer admittance, I2 is the current in the load and V1 is the
voltage at port 1. So, I2 by V1 is also a transfer admittance. How do you distinguish
between the 2? Use a Y and use the subscripts 21. Y21, now you must be able to
distinguish between Y and y, make them quite different do not make them look alike
because, then you might make a mistake.
Why you use this you see if R is 0 if this is short circuited then I2 by V1 is simply small
y21. Which means, the parameter of the network N it has nothing to do with terminations.
The parameter y is defined without termination now with termination I2 by V1 is still the
dimension of admittance and it is a current at 1 port to the voltage at the other port. So, it
is transfer admittance all right.
The y21 we call it short circuit transfer admittance that is it belongs to the network N.
Whereas, under terminated condition to distinguish between y21 the short circuit transfer
admittance and the transfer admittance of a terminated network. We use the symbol Y.
The subscripts are still 21 2 the first subscript refers to the port at which the response is
taken. That is, at port 2 and the second subscript refers to the port at which the excitation
is applied this will be our convention.
Y21 shall be that we are interested in a current at port 2 due to a voltage at port 1.
Similarly, if I had written z12 this will mean that we are interested in a voltage at port 1
due to.
Current at port 2.
A current at port 2 is that this will be our convention all right and in the context things
will be absolutely clear. Now, suppose you are fussy and you say no I do not want to
work with y parameters I want to work with z parameters. Well all that I have to do is to
refer to the table the place y21 by what?
z parameter .
z12 by Del z.
Plus or minus?
Sir minus
Minus z12 by Del z and y21 I shall replace it by z11 by Del z and work it out or I can go
back to the rules; I can do that. Let's take the next example before taking the next
example let me point out 1, 1 of the interesting equivalent circuits.
You see I told you that as per as z parameter is concerned if the network is reciprocal and
3 terminal then you can replace the network by a T network like this. Where, these
parameters are z11 minus z12 z22 minus z12 and z12. If the original network is
reciprocal, but not 3 terminal then this represents only a mathematical equivalent circuit
all right not a physical 1. On the other hand, if the network is reciprocal reciprocity is a
must. If the network is reciprocal and the three terminal this represents the physical
equivalent circuit also suppose it is neither.
Suppose, the network is not necessarily reciprocal not necessarily reciprocal; that means,
it can be nonreciprocal also. And it is truly four terminal can you draw an equivalent
circuit well this is simplicity itself the drawing of the equivalent circuit. If I write I1
z11plus I2 z12 and V2 equal to I1 z21 plus I2 z22, then it is common sense that this
equivalent circuit describes the network.
That is you have a z 1 one a current I1 V1. So, V1 equal to I1 z11 plus a quantity I2 z12
which is the dimension of voltage. So, I connect a voltage generator here which is I2 z12;
obviously, is that it is very simple V1 equal to I1 z11 plus this voltage source.
c.
Intrinsic.
Yes, the network parameter no termination now is this is this clear? This is a truly 4
terminal truly 4 terminal and it does that assume either reciprocity or non reciprocity we
have used z21 and z12 we have not assumed them to be equal. And therefore, this is a
general equivalent circuit. What have we achieved through this equivalent circuit nothing
much, we have simply represented instead of equations we have represented this by
means of a circuit.
The circuit contains 2 controlled sources the 2 circuits although shown physically isolated
from each other another e not really isolated. Why? Because the coupling comes to the
control sources you see this current control space. So, the 2 circuits are not decoupled
from itself. Although, physically there is no connection, but there is a connection through
the control of a voltage source by a current source similarly control of this source by the
current source.
So, we have not achieved much we have simply represented the equations by means of an
equivalent circuit. However, sometimes this equivalent circuit is of great help great
simplification as we shall show in 1 or 2 examples. But by a similar token you can
represent the y parameters.
I1 equal to V1 y11 plus V2 y12 and I2 equal to V1 y21 plus V2 y22 you can represent
this by a dual circuit. That is what you do is V1 I1 I1 is V1 times y11. So, introduce an
admittance y11 here plus another current and this current would be V2 y12, it is a current
source controlled by the voltage at port 2. It is a current source controlled by voltage at
port 2 V2. In a similar manner for the other port V2 and I2 I2 is V2 y22. So, we have an
admittance y22 here and another current source controlled current source whose value
would be V1 y21 all right.
This is an exact dual of the z parameter equivalent circuit in the case of z parameter there
was a series connection of a voltage source and impedance. Now, you have a parallel
connection of admittance and a current source. As I said you have not achieved much you
have only represented 2 equations by means of a circuit. But, a circuit a picture is a word
1000 words as we shall see in a few examples.
21.
21 that is correct Z21 this is what you want. Now, instead of going into any other any
other part if we simply represent if we simply take, the z parameter equivalent circuit.
What was the output equivalent circuit you have a V2. You have a series impedance z 2
22 this is the current I2 and a voltage source. What is the value?
I1 z21.
I1 z21 agreed and what we have done here I do not have to draw the other part because I
do not need it what I need is a relation between V2 and I1 I1 is already here. So, what I
have here is a an impedance let us say ZL and what I have to find out is the ratio V2 by I
1; obviously, V2 is equal to I1 z21 times ZL divided by z22 plus ZL. Simply a potential
division this is the voltage source and there is a potential division between z22 and ZL all
right.
Therefore, in 1 stroke of the pen we find out the transfer impedance z21 as V2 by I1 as
equal to z21 ZL divided by z22. Distinguish between small and I always cross the middle
draw a horizontal line in the middle to indicate z and do not do it for Z; this is how I
differentiate. Suppose, in this example it is not V2 well suppose the quantity of interest is
I2 that is the current show this impedance I2.
Can I find out the transfer function I2 by I1? Very simply I2 is related to V 2.
No, I do not need that V2 is equal to well I2 is equal to V2 divided by ZL with a negative
sign agreed. So, all that I have to do is yeah what did you say?
There is a mistake.
There is a minus sign all I have to do is to divide this transfer function by minus 1 by ZL
all right. So, ZL ZL cancels the negative sign this you must not forget all right.
The last example we have a voltage source V1 the network N and an admittance YL. Our
quantity of interest is V2 and I what I want to find out is V2 by V1. Now, in this situation
also the y parameter equivalent circuit the 4 terminal comes into help. If you recall from
the load end from port number 2 what I have is an admittance y22 and a current source.
How much y21 times?
I1 V1.
V1. So, I do not have to draw the other part at all I do is connect a YL here.
So, V2 is obviously, equal to V2 is the drop due to a current y21 V1 flowing into a
parallel combination of y22 and YL agreed. This is a current source which flows to this
parallel combination to produce a drop of V 2. So, V2 is y21 V1 current multiplied by
impedance. There is a minus sign here minus sign, because V2 and y2 and V1 they do not
agree. Therefore minus y2 and V1 divided by y22 plus YL agreed.
(Refer Slide Time: 52:21)
Let me write it down again V2 by V1 is equal to minus y21 divided by y22 plus YL. And
what was the situation? N there is a V1 here and there is a YL here this is V2. Now, I
want to recall I want you to recall that, if YL was equal to 0. If YL was equal to 0 which
means that, the termination is open circuit. Then the transfer function open circuit voltage
transfer function was precisely this was derived earlier minus y21 by y22; which checks
all right it checks.
The question that I leave you is that is there a preferred method of solution. Given a
problem is there a prepared method which parameters to use, which equivalent circuit to
use and so on. Is there a preferred method? My answer is no and yes. What does it mean?
There is a preferred method which comes there is no prescription. You cannot say if this,
this, this are to be found out and this are given you follow z parameter. No, there is no
prescription it comes by experience. That means, you solve more and more problem then
given a problem it will be obvious to you which parameter should we use all right. Next
occasion we shall take more examples and then go about to interrelations.