Академический Документы
Профессиональный Документы
Культура Документы
A complete line of solutions for improving the temperature management of your cargo.
Maximize Efficiency and Temperature Control with
PrimAir™ Air Management Products
Proper airflow from the refrigeration unit in a trailer is critical to ensure Why Use Chutes?
even temperature distribution within the trailer. The use of chutes is critical
• Chutes can help reduce temperature
to prevent top-freeze in produce hauling, and using a return air bulkhead
variance within a trailer
helps reduce the risk of short-cycling.
• Chutes can help eliminate
The full line of PrimAir chutes, return air bulkheads and insulated top freeze on produce
bulkheads can be used to ensure optimal airflow and even temperature
• Chutes deliver airflow throughout the
distribution, reducing hot spots in a trailer that can negatively
trailer to ensure product is maintained
impact the quality of the product being transported.
at a consistent temperature
Temperature Distribution
Cold Spot
The PrimAir Split Air Chute System is designed Reduce short-cycling and maintain uniform
to provide uniform temperature throughout product temperatures with this easy-to-use
the entire trailer. The unique diverter evenly bulkhead. It takes less than one minute to remove
distributes air to each side chute, which the bulkhead to access the refrigeration unit. No
then guides the air to the rear of the trailer. tools needed!
All components feature a USDA-approved
PrimAir Two-Piece Return Air Bulkhead
food grade surface to help maintain a
Bulkhead........................................................... TK-VORTEX
safe environment inside the trailer.
Additional Pallet Stop.............................VRABHDWKTPS
Features: Features:
• Chute design minimizes loading damage • Patent-pending installation design
• Special fasteners allow for easy access to unit • Independent pallet stops allow for replacement of
• Universal design fits most units only the high-impact area, not the entire bulkhead
• USDA-approved surface • Pre-installed filter screen prevents
• 100% recyclable debris from entering unit
• Made from rotationally molded pure polyethylene
PrimAir Split Air Chute System for uniform thickness
48’ Vinyl..............................TK-RMSD48
System includes bulkhead, 2 pallet stops, mounting
48’ Mesh.................... TK-RMSD48MSH
hardware and filter screen.
NEW PrimAir™
Chute Systems
- Designed for Thermo King PrecedentTM units
- Compatible with Thermo King and competitive units
- Patent Pending
No trimming
required:
installation is easy
compared to other
bulkheads.
Rigid, high-density
polyethylene
material:
resists damage and
meets FDA guidelines
for food handling.
Hinged top:
folds down for easy
access to the evaporator.
Support pod
configuration:
provides mounting to
front wall supports of
any brand of trailer.
Narrower design: Optional debris
reduced weight for easier screen: Large air intakes:
handling and installation. Integral pallet stops: reduces unit maintenance creates the lowest
resists damage to the by keeping debris out of pressure drop of any
bulkhead and evaporator. evaporator coil. one-piece bulkhead for
greatest efficiency.
Minimize Maintenance
Adding a debris screen to the return air bulkhead is a smart
way to improve the efficiency of your refrigeration unit and
Designed for Precedent reduce maintenance. By trapping plastic wrap and other
debris before it gets to the evaporator coil, the unit runs
The new PrimAir return air bulkhead was designed to work more efficiently and the debris can be cleaned out without
perfectly with Thermo King’s new Precedent units. While accessing the evaporator.
the bulkhead is compatible with older Thermo King and
Carrier® units, it has been optimized to deliver the best airflow
possible from the Precedent unit. Exceptionally Durable
The PrimAir bulkhead is constructed of a thick polyethylene
Easier to Handle and Install material. It is strong, durable, resistant to damage from the
cargo and provides protection for the evaporator. The non-
The new bulkhead design is narrower than previous and porous material is easily cleaned and specifically approved by
competitive models, making it lightweight and easy to handle the FDA for contact with food products.
during installation and allowing for easier service access.
Universal Design
One Piece Return Air Bulkheads The PrimAir bulkhead fits all Thermo King and Carrier®
Pressure Drop Across the Bulkhead wide post models. The support pod configuration provides
contact points for attaching to the trailer front wall supports,
1.6
regardless of the trailer manufacturer. The bulkhead does not
need to be attached to the evaporator itself.
Competitor 1
1.4
Competitor 2
1.2
Competitor 3
New PrimAir PrimAir Return Air Bulkheads
Lower Pressure Drop = More Efficient
1
201-3044 PrimAir Return Air Bulkhead, White
0.8 201-3045 PrimAir Return Air Bulkhead, Black
201-3048 PrimAir Return Air Bulkhead, White,
0.6 with Debris Screen
201-3053 PrimAir Return Air Bulkhead, Black,
0.4
with Debris Screen
0.2
Distributed by:
TK 54497-11-PL (8-13)