Академический Документы
Профессиональный Документы
Культура Документы
Premium Membership
Get access to premium HV/MV/LV technical articles, electrical guides, studies and much
more! Apply 20% OFF Code: EEP09PE
More Information
Power substation guides, research papers and studies
Stop 📃
https://electrical-engineering-portal.com/download-center/books-and-guides/power-substations/future-sas 1/6
10/29/2019 Achieving the future-proof architecture of a distribution substation automation | EEP
The thesis shows that the larger the substation, the greater the benefits of a centralized
architecture. It also shows how great is the impact of increased reliability. The outage costs
of a network exceed all the other life-cycle costs of the secondary system, and illustrates
how focusing on substation automation is a cost-efficient way to improve the reliability of
the network.
The question is how to proceed with substation automation so that it is both interoperable
and able to utilize new algorithms during the life-span of an IED, without increasing the life-
cycle costs or shortening the life-span of the physical device itself.
At the same time, utilities want to discourage vendors from creating monolithic secondary systems, which
can only be sold and maintained by a single vendor.
Various concept-level proposals for the secondary system of a substation have been
proposed which address the conflicting requirements for low life-cycle costs and the speedy
utilization of new technology.
Stop 📃
https://electrical-engineering-portal.com/download-center/books-and-guides/power-substations/future-sas 2/6
10/29/2019 Achieving the future-proof architecture of a distribution substation automation | EEP
The most traditional approach has been to increase the functionality of the bay-level
protection and control IEDs. This approach has been sufficient while CPU capacity has
been steadily increasing and the price of new technology has remained at a reasonable
level. The issue in this approach has been the extensive costs of upgrades.
New features have also called for substantial changes in the substation’s entire secondary
system, requiring maintenance breaks or the time-consuming planning of back-up
connections
An overview of this set-up, along with the two others, is presented in Figure 1 below,
where the set-up is described as ‘Decentralized’.
Figure 1 –
Decentralized
distribution substation
automation structure
Furthermore, the upgrade measures needed to implement new features have been
simplified, because only the centralized station computer requires updating. This, however,
creates a single point of failure in the substation. When the central station computer is out
of operation, the protection for the whole substation is lost.
In practice, fully centralized solutions would always need a redundant protection system –
either a redundant station computer or redundant bay-level protection and control IEDsStop
– 📃
https://electrical-engineering-portal.com/download-center/books-and-guides/power-substations/future-sas 3/6
10/29/2019 Achieving the future-proof architecture of a distribution substation automation | EEP
which would increase the overall costs of the substation secondary system.
The same maintenance problem as with a fully decentralized solution also exists. When an
upgrade is needed in an environment where all the functionality resides in the same
computer, the upgrade affects the whole protection system.
Figure 2 –
Decentralized
distribution substation
automation structure
A third approach addresses the challenge by combining these two methods. In this
approach, only a part of the bay-level functionality is moved to a new substation-level
centralized station computer.
The functionality is divided so that the most critical and important features, such as earth
fault or overcurrent protection, would remain in the bay-level devices, thus ensuring
network safety in all situations. This forms the backbone of a network protection system
with a long life cycle.
The functionality defined for the substation level would consist of value-added applications
and other “nice-to-have” features, for which a faster update cycle is both necessary and
acceptable.
Stop 📃
https://electrical-engineering-portal.com/download-center/books-and-guides/power-substations/future-sas 4/6
10/29/2019 Achieving the future-proof architecture of a distribution substation automation | EEP
Figure 3 – Combined
distribution substation
automation structure
This set-up also has a natural in-built back-up scheme, as the bay-level and station-level
devices provide a redundant protection system. The measures for updating the central
unit are cheaper and safer, allowing the smooth utilization of new functions.
One hypothesis of this thesis is that this combined approach will provide the most future-
proof platform for the secondary system of an electricity distribution substation, resulting in
the lowest overall life-cycle costs.
Stop 📃
https://electrical-engineering-portal.com/download-center/books-and-guides/power-substations/future-sas 5/6
10/29/2019 Achieving the future-proof architecture of a distribution substation automation | EEP
Stop 📃
https://electrical-engineering-portal.com/download-center/books-and-guides/power-substations/future-sas 6/6