Академический Документы
Профессиональный Документы
Культура Документы
Give Feedback... You have been directed to this document based on an ID match. Alternatively, click here to search on this phrase. Hide
Copyright (c) 2019, Oracle. All rights reserved. Oracle Confidential.
Automatic Memory Management (AMM) on 11g & 12c (Doc ID 443746.1) To Bottom
Purpose Yes
No
Scope
Details
Document Details
Introduction to Database Memory Components
Evolution of Memory Management Features
Type:
1. Automatic Memory Management – For Both the SGA and Instance PGA BULLETIN
Status:
PUBLISHED
Switching to Automatic Memory Management Last Major
Update: 04-Aug-2018
Monitoring and Tuning Automatic Memory Management Last 04-Aug-2018
Update: English
11g MEMORY_TARGET Parameter Dependency
Language:
2. Automatic Shared Memory Management – For the SGA
3. Manual Shared Memory Management – For the SGA
Related Products
4. Automatic PGA Memory Management – For the Instance PGA
Oracle Database Cloud
5. Manual PGA Memory Management – For the Instance PGA Schema Service
Oracle Database Exadata
6. AMM impact on Solaris OS
Cloud Machine
7. Automatic PGA memory management limitations on Linux Oracle Cloud Infrastructure -
Database Service
Community discussion Oracle Database Backup
Service
References Oracle Database Exadata
Express Cloud Service
Show More
APPLIES TO:
Information Centers
Oracle Database - Enterprise Edition - Version 11.1.0.6 and later
Platform as a Service (PaaS)
Information in this document applies to any platform. and Oracle Cloud
Infrastructure (OCI)
Information Center
PURPOSE [2048297.2]
インフォメーション・センタ
SCOPE ー: データベースおよび
Enterprise Manager 日本語ド
キュメント [1946305.2]
All the DBAs and users concerned with Database Administration activities.
Information Center: Overview
of Database Security Products
DETAILS [1548952.2]
Show More
The performance of complex long running queries, typical in a DSS environment, depend to a large extent on the memory
available in the Program Global Area (PGA) which is also called work area.
Recently Viewed
The below figure illustrates the relationships among these memory structures:
Automatic Memory
Management (AMM) on 11g
& 12c [443746.1]
How to Manually Run the
lsnrresp.pl Script to
Troubleshoot Listener
Availability Issues in
Enterprise Manager 12c and
13c Cloud Control
[1534087.1]
EM 13c, EM 12c: How to
Troubleshoot the Listener
Status (Up, Down) in
Enterprise Manager Cloud
Control [1534401.1]
EM 12c: How to Manually
Remove Agent and Host
Targets in Enterprise
Manager 12c Cloud Control
when they cannot be
Removed through the
Console Interface
[1594507.1]
EM 12c, EM 13c: Enterprise
Manager Cloud Control
Agent Removal Using
Evolution of Memory Management Features AgentDeinstall.pl on the
Target Host and Agent
Decommission in the
Memory management has evolved with each database release: Console [1673394.1]
Show More
Oracle 9i
Beginning with Oracle9i, the dynamic SGA infrastructure allowed for the sizing of the Buffer Cache, Shared Pool and the
Large Pool without having to shut down the database. Key features being:
Dynamic Memory resizing
DB_CACHE_SIZE instead of DB_BLOCK_BUFFERS
DB_nK_CACHE_SIZE for multiple block sizes
PGA_AGGREGATE_TARGET Introduction of Automatic PGA Memory management
Automatic Shared Memory Management (ASMM) was introduced in 10g. You enable the automatic shared memory
management feature by setting the SGA_TARGET parameter to a non-zero value.
Automatic Memory Management is being introduced in 11g. This enables automatic tuning of PGA and SGA with use of
two new parameters named MEMORY_MAX_TARGET and MEMORY_TARGET
Redo Log Buffer The redo log buffer is a circular buffer in LOG_BUFFER
the SGA that holds information about
changes made to the database. This
information is stored in redo entries.
Redo entries contain the information
necessary to reconstruct, or redo,
changes made to the database by
INSERT, UPDATE, DELETE, CREATE,
ALTER, or DROP operations. Redo
entries are used for database recovery, if
necessary.
Shared Pool The shared pool portion of the SGA SHARED_POOL_SIZE
contains the library cache, the dictionary SHARED_POOL_RESERVED_SIZE
cache, the result cache, buffers for RESULT_CACHE_MAX_SIZE *
https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=279745475808248&id=443746.1&_adf.ctrl-state=yyrm5e5os_57 2/8
5/8/2019 Document 443746.1
parallel execution messages, and control
structures.
Large Pool Used for allocating session memory for LARGE_POOL_SIZE
shared server, Oracle XA, or parallel
query buffers or for RMAN.
Java Pool Java pool memory is used in server JAVA_POOL_SIZE
memory for all session-specific Java code
and data within the JVM.
Streams Pool The streams pool is used exclusively by STREAMS_POOL_SIZE
Oracle Streams. The Streams pool stores
buffered queue messages, and it
provides memory for Oracle Streams
capture processes and apply processes.
* RESULT_CACHE_MAX_SIZE is new component which has been introduced as part of 11g Memory architecture. The result
cache is composed of the SQL query result cache and PL/SQL function result cache, which share the same
infrastructure.Results of queries and query fragments can be cached in memory in the SQL query result cache. The database
can then use cached results to answer future executions of these queries and query fragments. Similarly PL/SQL Function
Result can also be cached.
You have to use RESULT_CACHE_MODE initialization parameter which determines the SQL query result cache behavior. The
possible initialization parameter values are MANUAL and FORCE.
Oracle Database 11g supports various memory management methods, which are chosen by initialization parameter settings.
Oracle recommends that you enable the automatic memory management method.
1. Automatic Memory Management – For Both the SGA and Instance PGA
2. Automatic Shared Memory Management – For the SGA
3. Manual Shared Memory Management – For the SGA
4. Automatic PGA Memory Management –For the Instance PGA
5. Manual PGA Memory Management – For the Instance PGA
1. Automatic Memory Management – For Both the SGA and Instance PGA
Beginning with Oracle Database 11g, Oracle Database can manage the SGA memory and instance PGA memory completely
automatically. You designate only the total memory size to be used by the instance, and Oracle Database dynamically exchanges
memory between the SGA and the instance PGA as needed to meet processing demands. This capability is referred to as
automatic memory management. With this memory management method, the database also dynamically tunes the sizes of the
individual SGA components and the sizes of the individual PGAs.
To achieve this, two new parameters have been introduced named MEMORY_MAX_TARGET and MEMORY_TARGET. To do
so (on most platforms), you set only a target memory size initialization parameter (MEMORY_TARGET) and optionally a
maximum memory size initialization parameter (MEMORY_MAX_TARGET).
If you create your database with Database Configuration Assistant (DBCA) and choose the basic installation option,
automatic memory management is enabled. If you choose advanced installation, Database Configuration Assistant (DBCA)
enables you to select automatic memory management.
Add the values of PGA_AGGREGATE_TARGET and SGA_TARGET. In our case it would sum to 700MB.
Check also for SGA_MAX_SIZE being set. When switching to AMM, i.e. using MEMORY_TARGET, the parameter
SGA_MAX_SIZE (used for ASMM) should not be set as doing so fixes the size of the SGA, and hence conflicts with the
https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=279745475808248&id=443746.1&_adf.ctrl-state=yyrm5e5os_57 3/8
5/8/2019 Document 443746.1
intended use of MEMORY_TARGET.
2. Decide on a maximum amount of memory that you would want to allocate to the database which will determine the
maximum value for the sum of the SGA and instance PGA sizes. In our case we decide to set to 808M
When using a text initialization parameter file, then edit the parameter file and set the parameters manually:
MEMORY_MAX_TARGET=808M
MEMORY_TARGET=808M
SGA_TARGET=0
PGA_AGGREGATE_TARGET=0
In case you do not specify any value for MEMORY_MAX_TARGET and only use MEMORY_TARGET then database
automatically sets MEMORY_MAX_TARGET to the value of MEMORY_TARGET.
If you omit the line for MEMORY_TARGET and include a value for MEMORY_MAX_TARGET, the MEMORY_TARGET
parameter defaults to zero. After startup, you can then dynamically change MEMORY_TARGET to a non-zero value,
provided that it does not exceed the value of MEMORY_MAX_TARGET.
MEMORY_MAX_TARGET is a static parameter i.e it cannot be changed dynamically and the instance has to be
bounced for modifying its value. So ensure that you have set it to an appropriate value.
The preceding steps instruct you to set SGA_TARGET and PGA_AGGREGATE_TARGET to zero so that the sizes of the SGA and
instance PGA are tuned up and down as required, without restrictions. You can omit the statements that set these parameter
values to zero and leave either or both of the values as positive numbers. In this case, the values act as minimum values for the
sizes of the SGA or instance PGA.
Note: in case you set any parameter value to value which is higher then MEMORY_TARGET, then you get the ORA-844 error.
E.g. setting SGA_MAX_SIZE to value of 900 M results in the following:
SQL> startup
ORA-00844: Parameter not taking MEMORY_TARGET into account, see alert log for more information
https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=279745475808248&id=443746.1&_adf.ctrl-state=yyrm5e5os_57 4/8
5/8/2019 Document 443746.1
The dynamic performance view V$MEMORY_DYNAMIC_COMPONENTS shows the current sizes of all dynamically tuned memory
components, including the total sizes of the SGA and instance PGA. The view V$MEMORY_TARGET_ADVICE provides tuning
advice for the MEMORY_TARGET initialization parameter:
You can also use V$MEMORY_RESIZE_OPS which has a circular history buffer of the last 800 memory resize requests.
Note: if both MEMORY_TARGET and PGA_AGGREGATE_TARGET instance parameters have been set, then querying
V$PGASTAT can show a value for 'total PGA allocated' which is less than PGA_AGGREGATE_TARGET. This is correct
behaviour. The Oracle® Database Performance Tuning Guide shows the following remark about this phenomenon:
total PGA allocated: This gives the current amount of PGA memory allocated by the instance. Oracle tries to keep this
number less than the value of PGA_AGGREGATE_TARGET. However, it is possible for the PGA allocated to exceed that value
by a small percentage and for a short period of time, when the work area workload is increasing very rapidly or when the
initialization parameter PGA_AGGREGATE_TARGET is set to a too small value.
If SGA_TARGET and PGA_AGGREGATE_TARGET are set, they will be considered the minimum values for the sizes of SGA
and the PGA respectively. MEMORY_TARGET values can range from SGA_TARGET + PGA_AGGREGATE_TARGET to
MEMORY_MAX_TARGET.
If SGA_TARGET is set and PGA_AGGREGATE_TARGET is not set, we will still auto-tune both parameters.
PGA_AGGREGATE_TARGET will be initialized to a value of MEMORY_TARGET - SGA_TARGET.
If PGA_AGGREGATE_TARGET is set and SGA_TARGET is not set, we will still auto-tune both parameters. SGA_TARGET
will be initialized to the minimum non-zero value of MEMORY_TARGET - PGA_AGGREGATE_TARGET and SGA_MAX_SIZE
and will auto tune its components.
If neither is set, they will be auto-tuned without any minimum or default values. We will have a policy of distributing the
total memory set by MEMORY_TARGET parameter in a fixed ratio to the the SGA and PGA during initialization. The policy
is to give 60% to the SGA and 40% to the PGA at startup.
If MEMORY_MAX_TARGET has not been explicitly set, but MEMORY_TARGET has, the instance automatically sets
MEMORY_MAX_TARGET to the same value as MEMORY_TARGET. If MEMORY_TARGET has not been explicitly set, but
MEMORY_MAX_TARGET has, then MEMORY_TARGET defaults to 0. After instance startup, it then is possible to dynamically
change MEMORY_TARGET to a non-zero value, provided that it does not exceed the value of MEMORY_MAX_TARGET.
If MEMORY_TARGET is not set or set to set to 0 explicitly (default value is 0 for 11g):
If SGA_TARGET is set we will only auto-tune the sizes of the components of the SGA. PGA will be autotuned independent
of whether it is explicitly set or not. However, the combination of SGA and PGA will not be auto-tuned, i.e. the SGA and
PGA will not share memory and resize as with the case of MEMORY_TARGET being set to a non-zero value.
If neither SGA_TARGET nor PGA_AGGREGATE_TARGET is set, we will follow the same policy as we have today; PGA will
be auto-tuned and the SGA will not be auto-tuned and parameters for some of the SGA components will have to be set
explicitly (for SGA_TARGET).
If only MEMORY_MAX_TARGET is set, MEMORY_TARGET will default to 0 and we will not auto tune the SGA and PGA. It
will default to 10gR2 behavior.
If SGA_MAX_SIZE is not user set, it is internally set to MEMORY_MAX_TARGET.
If you want to exercise more direct control over the size of the SGA, you can disable automatic memory management and
enable automatic shared memory management. This feature was introduced in 10g with a parameter known as SGA_TARGET.
When automatic SGA memory management is enabled, the sizes of the different SGA components are flexible and can adapt to
the needs of current workload without requiring any additional configuration.
Document 295626.1 - How To Use Automatic Shared Memory Management (ASMM) In Oracle10g & 11g
In case you have enabled Automatic Memory Management and wish to switch to Automatic Shared Memory Management, then
follow the below procedure:
https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=279745475808248&id=443746.1&_adf.ctrl-state=yyrm5e5os_57 5/8
5/8/2019 Document 443746.1
If you want complete control of individual SGA component sizes, you can disable both automatic memory management and
automatic shared memory management. In this mode, you need to set the sizes of several individual SGA components, thereby
determining the overall SGA size. You then manually tune these individual SGA components on an ongoing basis.
In this case you set SGA_TARGET and MEMORY_TARGET to 0 and set value for other SGA components upto the total value of
SGA_MAX_SIZE.
Please note that SGA re-sizes can occur after upgrade to 11.2 despite the fact that automatic memory management
(AMM/ASMM) is disabled via the MEMORY_TARGET and SGA_TARGET parameters being set to zero. This typically appears as
growth in the __SHARED_POOL_SIZE value and a reduction in the __DB_CACHE_SIZE value being used in the instance, such
that
__DB_CACHE_SIZE may be shrunk below the DB_CACHE_SIZE value specified in the init.ora/spfile.
This is expected behavior in 11.2 for immediate memory allocation requests, which added this as a new feature when
automatic memory management was disabled.
You can set the parameter _MEMORY_IMM_MODE_WITHOUT_AUTOSGA=false in the instance to disable this feature with the
consequence that in future an ORA-4031 error would be raised, e.g.:
connect / as sysdba
alter system set "_memory_imm_mode_without_autosga"=FALSE scope=both;
exit
Parameter: _MEMORY_IMM_MODE_WITHOUT_AUTOSGA
Default value: 0 (SGA autotuning is disabled for DEFERRED mode autotuning requests, but allowed for IMMEDIATE mode
autotuning requests)
While using Automatic memory management, PGA memory is allocated based upon the value of MEMORY_TARGET. In case you
enable automatic shared memory management or manual shared memory management, you also implicitly enable automatic
PGA memory management. For more information, see Document 1392549.1 - SGA and PGA Management in 11g's Automatic
Memory Management (AMM).
Automatic/Manual PGA memory management is decided by the initialization parameter WORKAREA_SIZE_POLICY which
is a session- and system-level parameter that can take only two values: MANUAL or AUTO. The default is AUTO.
With automatic PGA memory management, you set a target size for the instance PGA by defining value for parameter named
PGA_AGGREGATE_TARGET and sizing of SQL work areas is automatic and all *_AREA_SIZE initialization parameters are
ignored for these sessions. This feature is available from 9i.
At any given time, the total amount of PGA memory available to active work areas on the instance is automatically derived from
the parameter PGA_AGGREGATE_TARGET. This amount is set to the value of PGA_AGGREGATE_TARGET minus the PGA
memory allocated for other purposes (for example, session memory). The resulting PGA memory is then allotted to individual
active work areas based on their specific memory requirements.
Please refer to following document for more details on Automatic PGA Memory Management:
In case you wish to manually specify the maximum work area size for each type of SQL operator (such as sort or hash-join) then
you can enable Manual PGA Memory management.
Set WORKAREA_SIZE_POLICY value to MANUAL and also specify values for *_AREA_SIZE such as SORT_AREA_SIZE,
HASH_AREA_SIZE, BITMAP_MERGE_AREA_SIZE, and CREATE_BITMAP_AREA_SIZE, etc.
Although the Oracle Database 11g supports this manual PGA memory management method, Oracle strongly recommends that
you leave automatic PGA memory management enabled.
https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=279745475808248&id=443746.1&_adf.ctrl-state=yyrm5e5os_57 6/8
5/8/2019 Document 443746.1
Automatic PGA memory PGA Instance PGA target size Individual PGA sizes
management (PGA_AGGREGATE_TARGET)
Manual PGA memory PGA Maximum work area size for each None
management type of SQL operator
(Not recommended)
The Automatic Memory Management (AMM) feature uses the Memory Manager (MMAN) background process. This process
was introduced in 10g which assisted in Automatic Shared Memory Management (ASMM) using SGA_TARGET. MMAN serves as
the SGA Memory Broker and coordinates the sizing of the memory components. The SGA Memory Broker keeps track of the sizes
of the components and pending resize operations.
Configuring AMM or ASMM on Solaris OS will cause the OS to use a feature called Dynamic Intimate Shared Memory (DISM).
This allows for shared memory segments to be dynamically resizable. Oracle uses DISM for its dynamic System Global Area
(SGA) capability when AMM or ASMM is configured. With Oracle 9i and higher, if SGA_MAX_SIZE > SGA_TARGET (or sum of sga
compenents), then DISM is used. On 11g, DISM is also used if MEMORY_TARGET or MEMORY_MAX_TARGET is set. Otherwise,
ISM is used if DISM is not enabled.
DISM (unlike ISM), requires a swap reservation for all pages, whether or not they're allocated. This basically means you will
need to configure at least as much swap space as the SGA size for instances that are using DISM. Otherwise, memory errors
could occur when trying to run the instance with inadequate swap space.
To determine if DISM is being used for an Oracle instance, you can look on the OS side with ps utility:
The only way to avoid the use of DISM and the swap space requirement would be to use manual memory management.
On Linux systems, a process can reach a 4G limit due to default settings and error with ORA-4030. These errors show up
because running out of map entries. By default there are only 65536 memory map entries per process.
Although not necessary to diagnose, an OS trace using strace/truss of Oracle process may show using mmap() instead of
malloc() for memory allocation.
There are two ways to allow the process to access more memory than 4G:
$ more /proc/sys/vm/max_map_count
The default realfree allocator pagesize is 64 KB, so 64K entries take up 4GB. With 256KB pages as specified above, the
limit goes up to 16GB.
https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=279745475808248&id=443746.1&_adf.ctrl-state=yyrm5e5os_57 7/8
5/8/2019 Document 443746.1
No quantitative data available regarding performance for either setting. May want to test both settings to determine if either
provides better performance.
Community discussion
For further discussion or questions about topics in this article, please visit 'Using ASSM on Oracle 10g and 11g and AMM on
Oracle 11g'
REFERENCES
NOTE:2128928.1 - How To Convert A Database Using AMM (Automatic Memory Management) To A Database That Has Been
Configured With Hugepages
NOTE:1269139.1 - SGA Re-Sizes Occurring Despite AMM/ASMM Being Disabled (MEMORY_TARGET/SGA_TARGET=0)
Attachments
The Oracle Database Memory Structures (14.16 KB)
Related
Products
Oracle Cloud > Oracle Platform Cloud > Oracle Database Cloud Service > Oracle Database Cloud Schema Service
Oracle Cloud > Oracle Infrastructure Cloud > Oracle Cloud at Customer > Oracle Database Exadata Cloud Machine
Oracle Cloud > Oracle Platform Cloud > Oracle Cloud Infrastructure - Database Service > Oracle Cloud Infrastructure - Database Service
Oracle Cloud > Oracle Platform Cloud > Oracle Database Backup Service > Oracle Database Backup Service
Oracle Cloud > Oracle Platform Cloud > Oracle Database Cloud Service > Oracle Database Exadata Express Cloud Service
Oracle Cloud > Oracle Platform Cloud > Oracle Database Cloud Service > Oracle Database Cloud Exadata Service
Oracle Cloud > Oracle Platform Cloud > Oracle Database Cloud Service > Oracle Database Cloud Service
Oracle Database Products > Oracle Database Suite > Oracle Database > Oracle Database - Enterprise Edition > RDBMS > general AMM problems including 10g ASMM
Keywords
ASMM; DB_CACHE_SIZE; DYNAMIC ADV FEATURES; DYNAMIC ADVSETUP; DYNAMIC SGA; JAVA_POOL_SIZE; LARGE_POOL_SIZE; MEMORY_MAX_TARGET; MEMORY_TARGET;
PGA_AGGREGATE_TARGET; SGA_MAX_SIZE; SHARED_POOL_SIZE
Errors
04030; 04031; ORA-00844; ORA-4030; ORA-844
Translations
Back to Top
Copyright (c) 2019, Oracle. All rights reserved. Legal Notices and Terms of Use Privacy Statement
https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=279745475808248&id=443746.1&_adf.ctrl-state=yyrm5e5os_57 8/8