Академический Документы
Профессиональный Документы
Культура Документы
Fittings
Wrot and cast copper pressure fittings • Wrot and cast copper drainage
fittings • Wrot copper PEXlink® fittings • Cast copper alloy flared fittings • Cast
copper alloy flanges • ABS and PVC DWV fittings • Schedule 40 PVC pres-
sure fittings • CPVC CTS fittings • CPVC CTS-to-metal transition fittings
• Schedule 80 PVC and CPVC systems • CPVC metric piping systems.
Chemtrol®
Supporting
Ideas
Thermoplastic pipe, valves and fittings in PVC, Corzan® CPVC, polypropylene
and PVDF Kynar® • Chem-Aire® thermoplastic compressed air piping systems
• Pneumatic and electric actuation systems.
the Flow.
that flow. ™
eNIBCO®
Supporting A suite of services designed to make customers more efficient • More cost-effective
• More informed • EDI—Electronic Data Interchange • VMI—Vendor Managed
Inventory • NIBCO.com • NIBCOpartner.com • eNIBCO will continuously develop
the Flow. ™ new products to deliver the competitive advantage.
C-TOLH-0403
™
w
wwww
w..to
tolclcoo..ccoomm
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 51.737.0330
Customer Service • 800.786.5266 1
www.tolco.com
www.tolco.com www.tolco.com
Revision 5/24/2001 Revision 6/1/2002
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 95.737.0330 Main Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 909.737.5599 • Fax: 909.737.0330
Customer Service • 800.786.5266 Customer Service • 800.786.5266 181
www.tolco.com www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
2 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 3
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
4 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 5
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
6 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 6/11/2004
Dimensions • Weights
Pipe Rod Size A Max. Rec. Approx.
Size STD NFPA B C D Load Lbs. Wt./100
1/2 3/8 3/8 21/16 13/16 1 610 36
3/4 3/8 3/8 27/8 17/8 1 610 38
1 3/8 3/8 31/4 21/16 1 610 42
11/4 3/8 3/8 39/16 21/4 1 610 46
11/2 3/8 3/8 37/8 23/8 1 610 49
2 3/8 3/8 47/16 23/4 1 610 55
21/2 1/2 3/8 55/16 31/4 1 1130 124
3 1/2 3/8 515/16 31/2 11/4 1130 140
31/2 1/2 3/8 67/16 33/4 11/4 1130 152
4 5/8 3/8 73/8 41/4 11/2 1430 190
5 5/8 1/2 815/16 51/4 11/2 1430 235
6 3/4 1/2 913/16 51/2 11/2 1940 317
8 3/4 1/2 129/16 71/8 2 2000 428
10 7/8 5/8 161/4 95/8 31/4 3600 918
12 7/8 5/8 191/4 115/8 31/2 3800 1143
14 1 — 2013/16 125/16 313/16 4200 1543
16 1 — 2115/16 127/16 35/8 4600 1925
18 1 — 247/16 1315/16 37/8 4800 2243
20 11/4 — 265/16 147/16 4 4800 4161
*24 11/4 — 313/8 171/2 41/4 4800 4835
*30 11/4 — 387/8 217/8 5 6000 6940
*36 11/2 — 48 273/4 53/4 9500 18103
*Furnished with pipe spacer to support maximum load rating
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 15
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
16 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Rod Max. Rec. Approx.
Size Size A Pipe O.D. B C D Load Lbs. Wt./100
4 5/8 4.80 8 43/4 15/8 1430 213
6 3/4 6.90 103/16 53/4 13/4 1940 430
8 3/4 9.05 125/8 7 13/4 2000 664
10 7/8 11.10 157/16 85/8 21/4 3600 940
*12 7/8 13.20 167/8 9 21/4 3800 1217
*14 1 15.30 207/8 113/4 21/2 4200 1533
*16 1 17.40 2311/16 131/2 33/8 4600 1925
*18 1 19.50 261/16 147/8 33/8 4800 2223
*20 11/4 21.60 291/16 163/8 33/4 4800 4182
*24 11/4 25.80 333/8 185/8 4 4800 5460
*Furnished with pipe spacer to support maximum load rating
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 17
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 3/18/2002
Dimensions • Weights
Pipe Rod Size Max Insulation Max. Rec. Approx.
Size A B C D Thickness E Load Lbs. Wt./100
3/4 3/8 41/4 33/8 1/2 2 610 54
1 3/8 411/16 33/4 5/8 2 610 59
11/4 3/8 51/4 41/8 7/8 2 610 62
11/2 3/8 53/4 49/16 11/16 2 610 67
2 3/8 811/16 7 15/8 4 610 84
21/2 1/2 915/16 8 2 4 1130 185
3 1/2 105/16 81/16 13/4 4 1130 205
4 5/8 115/8 811/16 115/16 4 1430 252
5 5/8 125/8 91/4 13/4 4 1430 309
6 3/4 14 97/8 17/8 4 1940 400
8 7/8 163/4 11 2 4 2000 607
10 7i/8 193/16 121/4 21/8 4 3600 1032
12 7/8 219/16 135/8 27/16 4 3800 1315
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
18 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
®
Revision 5/24/2001
a brand of
Fig. 1PVC
Dimensions • Weights
Pipe Rod Size A Max. Rec. Approx.
Size STD NFPA B C D Load Lbs. Wt./100
1/2 3/8 3/8 27/8 1 1 610 36
3/4 3/8 3/8 31/16 111/16 1 610 38
1 3/8 3/8 33/8 17/8 1 610 43
11/4 3/8 3/8 33/4 21/16 1 610 47
11/2 3/8 3/8 41/16 23/16 1 610 50
2 3/8 3/8 41/2 29/16 1 610 56
21/2 1/2 3/8 51/2 31/16 1 1130 125
3 1/2 3/8 61/8 35/16 11/4 1130 141
31/2 1/2 3/8 63/4 39/16 11/4 1130 153
4 5/8 3/8 75/8 41/16 11/2 1430 191
5 5/8 1/2 87/8 51/16 11/2 1430 236
6 3/4 1/2 10 55/16 11/2 1940 318
8 3/4 1/2 123/4 615/16 2 2000 429
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 19
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Rod Max. Rec. Approx.
Size Size A B C D Load Lbs. Wt./100
1/2 3/8 213/16 1 1 150 27
3/4 3/8 3 111/16 1 250 29
1 3/8 35/16 17/8 1 250 33
11/4 3/8 311/16 21/16 1 250 35
11/2 3/8 4 23/16 1 250 37
2 3/8 47/16 29/16 1 250 45
21/2 1/2 53/8 31/16 11/4 350 97
3 1/2 6 35/16 11/4 350 106
31/2 1/2 65/8 39/16 11/4 350 111
4 1/2 71/2 41/16 11/2 400 152
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
20 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Rod Max. Rec. Approx.
Size No. Size Size A B C D Load Lbs. Wt./100
1 1/2 3/8 51/2 43/4 15/8 150 38
1 3/4 3/8 51/2 49/16 15/8 150 38
1 1 3/8 51/2 43/8 15/8 150 38
1 11/4 3/8 51/2 41/8 15/8 150 38
1 11/2 3/8 51/2 4 15/8 150 38
1 2 3/8 51/2 311/16 15/8 150 38
2 21/2 1/2 83/4 65/8 13/4 150 115
2 3 1/2 83/4 63/16 13/4 150 115
2 31/2 1/2 83/4 513/16 13/4 150 115
2 4 1/2 83/4 57/16 13/4 150 115
Dimensions • Weights
For Rod Max. Rec. Approx.
Size No. Pipe Size Length Load Lbs. Wt./100
1 1/2 - 2 10 ft. 150 540
2 21/2 - 4 10 ft. 150 1080
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 21
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Max. Rec. Approx Wt./100
Size Rod Size A B C Load Lbs. Fig. 2 Fig. 2NFPA
21/2 1/2* 53/4 41/4 15/8 600 41 40
3 1/2* 6 41/8 11/4 600 45 43
31/2 1/2* 73/8 51/4 21/8 600 52 50
4 5/8* 73/8 5 15/8 1000 59 56
5 5/8** 9 61/8 21/4 1250 97 95
6 3/4** 93/8 61/2 17/8 1250 139 105
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
22 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Copper Tube Max. Rec. Approx.
Size Rod Size A B C Load Lbs. Wt./100
1/2 3/8 31/8 25/8 13/8 400 12
3/4 3/8 31/8 21/2 11/8 400 12
1 3/8 33/8 25/8 11/8 400 13
11/4 3/8 33/4 27/8 11/4 400 14
11/2 3/8 37/8 27/8 11/8 400 15
2 3/8 41/4 3 1 400 16
21/2* 1/2 53/4 41/8 13/4 600 41
3* 1/2 6 4 11/2 600 46
31/2* 1/2 73/8 51/4 13/8 600 53
4* 5/8 73/8 5 17/8 1000 60
5** 5/8 9 61/8 21/2 1250 98
6** 3/4 93/8 61/2 21/4 1250 140
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 23
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Fig. 2WON
Fig. 2F WON
Dimensions • Weights
Pipe Rod Size Max. Rec. Approx.
Size A B C D Load Lbs. Wt./100
1/2 3/8 25/8 21/8 11/4 400 14
3/4 3/8 25/8 2 1 400 14
1 3/8 27/8 21/8 1 400 16
11/4 3/8 33/8 21/2 11/4 400 17
11/2 3/8 31/2 21/2 1 400 18
2 3/8 33/4 21/2 7/8 400 20
21/2 1/2* 5 31/2 11/2 600 27
3 1/2* 51/2 35/8 11/4 600 40
31/2 1/2* 63/4 45/8 2 600 48
4 5/8* 63/4 43/8 11/2 1000 53
5 5/8** 81/2 55/8 21/8 1250 91
6 3/4** 91/4 57/8 15/8 1250 99
8 3/4** 121/4 77/8 25/8 1250 120
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
24 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Fig. 3
Dimensions • Weights
Copper Tube Rod Size Max. Rec. Approx.
Size A B C D E F Load Lbs. Wt./100
1/2 3/8 25/8 13/4 7/16 11/2 115/16 400 18
3/4 3/8 27/8 17/8 7/16 111/16 21/8 400 21
1 3/8 215/16 115/16 7/16 113/16 25/16 400 22
11/4 3/8 31/4 2 7/16 21/16 25/8 400 25
11/2 3/8 39/16 23/16 7/16 27/16 27/8 400 27
2 3/8 311/16 21/8 7/16 29/16 31/16 400 29
21/2 1/2 47/16 27/16 9/16 33/16 35/8 500 64
3 1/2 413/16 29/16 9/16 31/2 41/16 500 72
31/2 1/2 51/8 25/8 9/16 33/4 43/8 500 84
4 5/8 61/8 33/16 9/16 45/8 53/16 550 138
5 5/8 63/4 31/4 9/16 51/16 53/4 550 162
6 3/4 73/4 39/16 9/16 513/16 65/8 600 249
8 7/8 93/16 315/16 9/16 615/16 8 760 291
10 7/8 103/4 37/8 9/16 75/8 91/8 760 315
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 25
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 8/30/2002
Dimensions • Weights
Max. Design Load Lbs.
Pipe For Service Temp. Approx.
Size A B C D Bolt Size 650° 750°F Wt./100
1/2 37/16 1/4 11/8 11/8 5/16 500 445 29
3/4 39/16 1/4 11/4 11/4 5/16 500 445 31
1 39/16 1/4 11/4 15/16 5/16 500 445 35
11/4 43/16 1/2 13/8 111/16 5/16 500 445 40
11/2 49/16 5/16 15/8 17/8 5/16 800 715 42
2* 59/16 1/2 2 21/4 3/8 1040 930 93
21/2* 67/16 9/16 21/2 23/4 1/2 1040 930 126
3* 7 5/8 23/4 31/16 1/2 1040 930 141
31/2* 711/16 3/8 31/8 33/8 1/2 1040 930 154
4 81/2 5/8 35/16 311/16 5/8 1040 930 229
5 93/4 3/4 37/8 43/8 5/8 1040 930 261
6 115/8 3/4 47/8 51/8 3/4 1615 1440 537
8 135/16 1 55/8 6 3/4 1615 1440 625
10 161/2 1 71/4 71/4 7/8 2490 2220 1378
12 181/2 1 81/4 81/4 7/8 2490 2220 1574
14 20 11/8 9 9 7/8 2490 2220 2103
16 23 11/8 101/4 101/4 7/8 2490 2220 2314
18 257/8 11/4 111/2 111/2 1 3060 2730 3276
20 28 13/8 121/2 121/2 11/8 3060 2730 3863
24 33 /2
1
1 /8
5
15 /4
1
15 /4
1
11/4 3060 2730 5222
30 417/8 2 19 19 13/4 3500 3360 10511
*Meets UL 203A requirements for attachment of sway bracing. Horizontal design load for 1/2"-2" - 380#, 21/2" - 395#, 3" - 435#, 31/2" - 540#
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
26 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Max. Horizontal Approx.
Sizes A B C D Bolt Size Design Load Wt./100
4 81/2 9/16 33/8 311/16 1/2 2015 221
5 93/4 9/16 37/8 43/8 1/2 2015 253
6 111/2 5/8 5 51/8 1/2 2015 513
8 131/4 3/4 611/16 61/8 1/2 2015 601
OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330
CUSTOMER SERVICE • 800.786.5266 27
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 8/30/2002
Component of State of
Fig. 4B - Pipe Clamp for Sway Bracing California OSHPD Approved
Seismic Restraints System
Size Range — 3/4" thru 8" pipe.
Material — Carbon Steel
Function — For bracing pipe against sway and seismic distur-
bance.
Approvals — Included in our Seismic Restraints Catalog approved
by the State of California Office of Statewide Health Planning and
Development (OSHPD).
Finish — Plain
Note — Available in Electro-Galvanized and HDG finish or Stainless
Steel materials.
Order By — Figure number, pipe size and finish.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
28 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Max. Rec.Load Lbs. — Temps. Approx.
Sizes A B C Bolt Size 650F 750°F Wt./100
3 1 3 41/8 3/4 3370 3005 498
4 1 311/16 415/16 7/8 3515 3135 634
5 1 45/16 59/16 7/8 3515 3135 714
6 11/8 53/16 611/16 1 4865 4340 1351
8 11/8 61/4 73/4 1 4865 4340 1573
10 11/4 77/8 91/2 11/4 6010 5360 2537
12 15/8 91/2 115/8 11/2 8675 7740 4300
14 15/8 101/8 121/4 11/2 9120 8135 5228
16 15/8 113/16 135/16 11/2 9120 8135 5657
18 15/8 123/16 145/16 11/2 9150 8160 6914
20 15/8 135/16 157/16 11/2 9150 8160 7468
24 13/4 153/8 173/4 11/2 9200 `8205 12629
* Consult factory for sizes larger than 24"
Based on the allowable stresses shown in the ANSI code for pressure piping.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 29
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Fig. 4L
Longitudinal “In-Line” Sway Brace Attachment
Size Range — 2 ½" through 8" IPS.
Material — Carbon Steel
Function — For bracing pipe against sway and seismic disturbance.
Approvals — Underwriter's Laboratories Listed in the USA (UL) and
Canada (cUL) 2 ½" through 8".
Installation Instructions — Install Fig. 4L on the pipe to be braced.
Tighten bolts on ears of clamp securely. Insert brace pipe in swivel
jaw and tighten set screw until head breaks off. Sway brace assemblies
are intended to be installed in accordance with NFPA 13 and the
manufacturer's installation instructions.
Finish — Plain
Note — Available in electro-galvanized and HDG finish.
Order By — Figure number, pipe size and finish.
Important Note — The Fig. 4L is precision manufactured to perform its func-
tion as a critical component of a complete bracing assembly. To ensure per-
formance, the UL Listing requires that the Fig. 4L must be used only
with other TOLCO bracing products.
Dimensions • Weights
Bolt Max. Rec. Approx.
Sizes A C D Size Load Lbs. Wt./100
21/2 67/16 21/2 23/4 1/2 2015 253
3 7 23/4 31/16 1/2 2015 268
4 81/2 33/8 311/16 1/2 2015 348
5 93/4 37/8 43/8 1/2 2015 380
6 111/2 5 51/8 1/2 2015 640
8 131/4 611/16 61/8 1/2 2015 728
Longitudinal Brace
OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330
30 CUSTOMER SERVICE • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 9/22/2001
Component of State of
Fig. 5 - Standard Double Bolt Pipe Clamp California OSHPD Approved
Seismic Restraints System
Dimensions • Weights
Max. Design Load Lbs.
Pipe For Service Temp. Approx.
Size A B C D E Bolt Size 650° 750°F Wt./100
1/2 3/8 2 /16
13
2 /16
13
1 /2
1
7/8 3/8 950 — 73
3/4 5/8 3 23/8 111/16 11/16 3/8 950 — 73
1 5/8 31/4 25/8 115/16 15/16 3/8 950 — 77
11/4 5/8 31/2 27/8 23/16 19/16 3/8 950 — 79
11/2 1 53/8 41/2 25/8 13/4 5/8 1545 1380 236
2 1 513/16 415/16 215/16 21/16 5/8 1545 1380 251
21/2 1 61/8 51/4 31/4 23/8 5/8 1545 1380 274
3 1 63/4 57/8 35/8 211/16 5/8 1545 1380 289
31/2 1 73/16 65/16 37/8 3 5/8 1545 1380 315
4 1 73/4 65/8 411/16 39/16 3/4 2500 2230 745
5 1 89/16 77/16 55/16 43/16 3/4 2500 2230 828
6 11/2 97/8 81/2 61/8 43/4 7/8 2865 2555 1261
8 11/2 11 95/8 75/16 515/16 7/8 2865 2555 1535
10 11/2 12 101/2 87/8 75/16 1 3240 2890 2173
12 11/2 131/8 115/8 915/16 87/16 1 3240 2890 2404
14 2 145/16 129/16 115/16 99/16 11/4 4300 3835 4002
16 2 159/16 1313/16 125/16 109/16 11/4 4300 3835 4362
18 2 167/8 151/8 133/8 115/8 11/4 4300 3835 4935
20 2 181/4 163/8 151/8 131/4 13/8 5490 4900 6570
24 2 207/16 187/16 175/16 155/16 13/8 4500 4015 7524
30 21/2 26 23 22 19 13/8 7500 — 19502
36 21/2 323/8 287/8 255/8 221/8 13/4 10500 — 23488
Based on allowable stresses shown in the ANSI code for pressure piping.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 31
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 9/22/2001
Dimensions • Weights
Max. Design Load Lbs.
Pipe For Service Temp. Approx.
Size A B C D E Bolt Size 650° 750°F Wt./100
6 1 /4
3
10 /16
3
8 /16
15
6 4 /4
3
1 3500 3125 1200
8 2 113/8 101/8 71/4 6 11/8 4800 4285 1850
10 21/4 131/8 113/8 9 71/4 11/4 5500 4910 3030
12 21/2 145/16 129/16 103/8 85/8 13/8 7000 6250 4200
14 21/2 151/2 131/2 115/8 95/8 11/2 9500 8485 6000
16 3 171/8 147/8 131/8 107/8 13/4 10000 8930 8000
18 31/2 181/4 161/4 141/2 121/2 2 13800 12325 11500
20 31/2 193/4 171/4 16 131/2 2 15300 13665 14000
24 31/2 223/8 195/16 181/2 151/2 2 16300 14555 19000
30 41/4 323/4 281/4 243/8 197/8 21/4 20500 — 40600
36 41/2 401/4 343/4 3051/8 225/8 23/4 28000 — 67800
Based on allowable stresses shown in the ANSI code for pressure piping.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951737.5599 • Fax: 951.737.0330
32 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 33
www.tolco.com
™
www.tolco.com
®
Revision 5/24/2001
a brand of
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
34 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
®
Revision 10/3/2001
a brand of
Dimensions • Weights
Pipe Pipe Fig. 9X Approx.
Size O.D. A B* Bolt Size Washer Size Wt./100
4 4.80 109/16 121/2 5/8 3/4 866
6 6.90 13 151/8 5/8 3/4 1058
8 9.05 16 177/8 5/8 3/4 1246
10 11.10 173/4 191/8 5/8 3/4 1434
12 13.20 193/4 23 5/8 3/4 1614
14 15.30 253/4 277/8 7/8 11/4 4557
16 17.40 293/16 317/8 1 11/4 6730
18 19.50 31 3311/16 11/4 11/4 7643
20 21.60 301/8 357/8 11/4 11/2 9174
24 25.80 365/8 405/8 11/2 11/2 11991
Dimensions • Weights
Tie Rod Approx.
Size A B Wt./100
3/4 213/16 7/8 95
1 313/16 15/16 253
11/4 313/16 13/8 248
11/2 31/2 15/8 240
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 35
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Tie Rod Approx.
Size A B Wt./100
3/4 3 7/8 120
1 31/2 11/8 157
11/8 31/2 11/4 194
11/4 31/2 13/8 230
11/2 31/2 15/8 240
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
36 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 37
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 3/31/2003
* Patent Pending
Dimensions • Weights
CPVC Max. Hanger Fastener Hex Approx.
Pipe Size A B C Spacing (Ft.) Head Size Wt./100
3/4 27/16 15/16 13/16 51/2 5/16 9
1 211/16 17/16 13/16 6 5/16 9
11/4 31/16 15/8 13/16 61/2 5/16 11
11/2 35/16 13/4 13/16 7 5/16 12
2 33/4 21/8 13/16 8 5/16 15
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
38 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 39
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
CPVC Max. Hanger Fastener Hex Approx.
Pipe Size A B C Spacing (Ft.) Head Size Wt./100
3/4 31/8 19/16 13/16 51/2 5/16 9
1 33/8 111/16 13/16 6 5/16 9
11/4 43/16 23/32 13/16 61/2 5/16 11
11/2 47/16 27/32 13/16 7 5/16 12
2 47/8 27/16 13/16 8 5/16 15
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
40 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
CPVC Max. Hanger Fastener Hex Approx.
Pipe Size A B C Spacing (Ft.) Head Size Wt./100
3/4 25/16 15/32 13/16 51/2 5/16 9
1 25/8 15/16 13/16 6 5/16 9
11/4 3 11/2 13/16 61/2 5/16 11
11/2 31/4 15/8 13/16 7 5/16 12
2 311/16 127/32 13/16 8 5/16 15
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 41
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 3/24/2003
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951737.5599 • Fax: 951.737.0330
42 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Typical Applications
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 43
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 1/11/05
Fig. 28
"Stand-Off" Hanger & Restrainer for CPVC Plastic Pipe
Size Range — ¾" through 2"
Material — Carbon Steel, Pre-Galvanized
Function — Designed to be used as a hanger and restrainer for CPVC piping
where the "stand-off" design will ease installation by eliminating the need for wood
blocking.
Features:
• Flared edge design protects CPVC pipe from any rough or abrasive surfaces.
• Unique twist and lock design holds pipe firmly in place and allows retrofit type
of installation.
• The "Stand-Off" design eliminates the need for wood block
extension.
• Can be installed on horizontal or vertical piping regardless of mounting sur-
face orientation.
• Attached easily to wood structure with two hex head self-threading screws
furnished with product.
• Installs easily using rechargeable electrical driver with 5/16" extension socket
eliminating impact tool damage to pipe.
• U.L. Listed as a hanger and a restrainer for fire sprinkler piping.
Approvals — Underwriters' Laboratory Listed in the USA (UL) and Canada (cUL) to
support automatic fire sprinkler systems. Meets and exceeds the requirements of
NFPA 13, 13R and 13D. Fig. 28 satisfies the UL vertical restraint requirement where
needed. UL Listed as a hanger and vertical restraint when installed on 3/8" composite
wood material. Use two Fig. 27B Speed Nuts when used as a hanger and restraint.
Use one Fig. 27B Speed Nut on the upper installed screw when used as a hanger only.
Order by — Figure number and pipe size.
US AND INTERNATIONAL PATENT APPLICATION IN PROCESS.
Dimensions • Weights
Approx.
A B C Wt.
3/4 31/8 2 .180
1 33/8 21/8 .210
11/4 35/8 23/8 .225
11/2 41/8 21/2 .310
2 41/2 23/4 .340
OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330
50 CUSTOMER SERVICE • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Approx.
A B C Wt./100
9 8 6.5 750
13 12 10.5 750
19 18 16.5 750
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 45
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Fig. 30L
Dimensions • Weights
Hole Max. Rec. Approx.
Sizes A B C Size Load Lbs. Wt./100
1 13 9 111/2 9/16 750 571
2 17 13 151/2 9/16 750 769
3 23 19 211/2 9/16 750 1057
Fig. 30M
Dimensions • Weights
Hole Max. Rec. Approx.
Sizes A B C Size Load Lbs. Wt./100
0 18 12 151/2 13/16 1500 1577
1 24 18 211/2 13/16 1500 2578
2 30 24 271/2 13/16 1500 4446
Fig. 30H
Dimensions • Weights
Hole Max. Rec. Approx.
Sizes A B C D Size Load Lbs. Wt./100
1 18 12 151/4 * 11/8 3000 2195
2 24 18 211/4 21/2 11/8 3000 4398
3 30 24 271/4 21/2 11/8 3000 6294
4 36 30 33 21/2 11/8 3000 7196
5 42 36 39 31/2 11/8 3000 13197
6 50 42 46 31/2 11/8 3000 15795
* One hole
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
46 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe H Approx.
Size Hole Size Wt./100
1/2 - 21/2 9/16 1000
3 9/16 1000
31/2 9/16 1000
4 11/16 1000
5 11/16 1000
6 11/16 1000
8 11/16 1000
Dimensions • Weights
Pipe H Approx.
Size Hole Size Wt./100
1/2 - 21/2 9/16 450
3 9/16 450
31/2 9/16 450
4 11/16 450
5 11/16 450
6 11/16 450
8 11/16 450
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 909.737.5599 • Fax: 909.737.0330
Customer Service • 800.786.5266 47
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 9/22/2001
Dimensions • Weights
Pipe U-Bolt Approx.
Size Dia. A B C Wt./100
1/2 3/8 15/16 4 13/16 80
3/4 3/8 11/16 23/8 13/8 88
1 3/8 13/16 25/8 13/8 96
11/4 3/8 13/8 27/8 21/16 107
11/2 3/8 19/16 31/4 23/8 118
2 3/8 13/4 33/8 213/16 132
21/2 1/2 2 415/16 37/16 175
3 1/2 23/8 59/16 41/16 215
31/2 1/2 23/8 61/16 49/16 240
4 1/2 27/8 69/16 51/16 265
Dimensions • Weights
Pipe U-Bolt Approx.
Size Dia. A B C D Wt./100
5 1/2 37/16 4 61/8 21/4 290
6 3/8 4 5 73/8 3 315
8 5/8 51/4 7 93/8 41/2 885
10 3/4 67/16 8 115/8 51/2 1050
12 7/8 71/2 9 133/4 6 1210
14 7/8 83/16 10 15 7 1480
16 7/8 91/4 10 17 7 1735
18 1 103/8 11 191/8 7 2011
20 1 113/8 12 211/8 7 2332
24 1 135/8 12 251/8 8 2550
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951737.5599 • Fax: 951.737.0330
48 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod Max. Rec. Approx.
Size A B C D H T Load Lbs.* Wt./100
1/2 10 8 9/16 17/8 5/8 1/4 1130 1115
5/8 10 8 9/16 2 3/4 1/4 1810 1465
3/4 10 8 11/16 2 7/8 3/8 2710 1478
7/8 10 8 11/16 23/4 1 3/8 3770 2195
1 12 8 13/16 23/4 11/8 1/2 4960 3185
11/4 12 8 15/16 4 13/8 5/8 8000 4385
11/2 12 8 11/8 4 15/8 3/4 11630 4568
13/4 12 8 13/8 41/4 17/8 3/4 15700 5578
2 12 8 13/8 41/4 21/4 3/4 20630 5820
* Based on allowable stresses shown in the ANSI code for pressure piping.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 49
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod Pin Dia. Max. Rec. Approx.
Size A B C D E F Load Lbs.* Wt./100
3/8 10 8 9/16 23/8 13/4 1/2 610 1175
1/2 10 8 9/16 23/8 13/4 5/8 1130 1185
5/8 10 8 9/16 21/2 13/4 3/4 1810 1565
3/4 10 8 11/16 21/2 21/4 7/8 2710 1685
7/8 10 8 11/16 31/2 23/4 1 3770 1805
1 12 8 13/16 33/4 3 11/8 4960 3685
11/4 12 8 15/16 33/4 33/4 13/8 8000 4085
11/2 12 8 11/8 5 41/2 15/8 11630 5975
13/4 14 10 13/8 51/4 51/4 17/8 15700 9355
2 14 10 13/8 51/4 51/4 21/4 20700 10000
* Based on allowable stresses shown in the ANSI code for pressure piping.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
50 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod Max. Rec. Approx.
Size A B C D Load Lbs.* Wt./100
3/8 10 8 9/16 31/4 610 1155
1/2 10 8 9/16 31/4 1130 1160
5/8 10 8 9/16 31/2 1810 1505
3/4 10 8 11/16 35/8 2710 1605
7/8 10 8 11/16 43/4 3770 1665
1 12 8 13/16 51/4 4960 3485
11/4 12 8 15/16 53/4 8000 3865
11/2 12 8 11/8 71/2 11630 5635
13/4 14 10 13/8 9 15700 8805
2 14 10 13/8 91/2 20700 9215
* Based on allowable stresses shown in the ANSI code for pressure piping.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 51
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Dimensions • Weights
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
52 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Hole Max. Rec. Approx.
Size A B Size Load Lbs. Wt./100
1 3 2 7/16 180 46
2 4 3 7/16 180 65
3 3 2 9/16 390 85
4 4 3 9/16 390 115
Dimensions • Weights
Pipe Hole Max. Rec. Approx.
Size A B C Size Load Lbs. Wt./100
3/8 2 3/4 2 7/16 700 35
1/2 2 3/4 2 9/16 700 35
5/8 2 3/4 2 11/16 700 32
3/4 21/2 3/4 21/2 13/16 1250 110
7/8 21/2 3/4 21/2 15/16 1250 100
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 53
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Rod Hole Size Max. Rec. Approx.
Size Size A B C H-1 H-2 Load Lbs.* Wt./100
1/2 - 2 3/8 2 3/4 2 7/16 7/16 700 35
21/2 - 4 3/8 2 3/4 2 9/16 7/16 700 34
5-6 1/2 21/2 3/4 21/2 9/16 9/16 1250 71
8 1/2 21/2 3/4 21/2 11/16 9/16 1250 70
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
54 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Hole Size Max. Rec. Approx.
Size A B C H-1 H-2 H-3 Load Lbs.* Wt./100
3/8 x 1/2 2 13/16 2 9/16 7/16 5/16 700 35
1/2 x 1/2 2 3/4 2 9/16 9/16 5/16 700 34
Dimensions • Weights
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 55
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 8/06/2003
Dimensions • Weights
Dimensions • Weights
Pipe Rod Max. Rec. Approx.
Size Size A B C Load Lbs. Wt./100
1/2 thru 4 3/8 23/4 11/2 11/8 300 14
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
56 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Hood Rod I-Rod (Fig. 102) Max. Rec.
Pipe Size Diameter A Load Lbs.
3/4 - 2 3/8 3/8 610
21/2 - 31/2 1/2 1/2 940
4-5 1/2 5/8 940
6 1/2 3/4 940
Dimensions • Weights
Max. Rec.
Type A B C Load Lbs.
1 3/8 5/16 1 300
2 1/2 3/8 1 500
3 5/8 7/16 1 700
4 3/4 1/2 11/2 1000
5 7/8 9/16 11/2 2000
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 57
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Rod Max. Rec.
Size Size Load Lbs.
Up to 4 3/8 300
6 1/2 600
OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330
64 CUSTOMER SERVICE • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Max. Rec.
Type A B* Bolt Size Load Lbs.
1 1/2 13/8 3/8 1000
2 1/2 13/8 1/2 1250
3 5/8 19/16 1/2 1500
4 3/4 21/4 5/8 3000
5 3/4 21/4 5/8 3250
6 3/4 25/16 3/4 3500
* Not applicable for type 1 — 2" and type 3 — 2" flange widths.
Dimensions • Weights
Flange Max. Flange Approx. Wt./100
Width Thickness Type 1 Type 2 Type 3 Type 4 Type 5 Type 6
2 7/16 66 85 — — — —
3 1/2* 75 95 151 355* — —
4 1/2 91 114 163 382 470 634
5 5/8 100 125 187 435 536 667
6 3/4 115 143 216 452 558 728
7 7/8 129 16 242 484 606 767
8 7/8 144 177 267 510 659 861
9 1 159 196 295 583 721 913
10 1 172 210 319 625 773 982
11 1 185 227 343 667 826 1048
12 1 198 243 367 709 879 1115
* Maximum flange thickness type 1, 2 and 3 = 7/16"
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 59
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Max. Pipe Rod Size Max. Rec. Approx.
Size A B C D Load Lbs. Wt./100
2 3/8 23/8 23/8 1 400 40
31/2 1/2 23/8 23/8 1 400 50
5 5/8 23/8 23/8 1 550 70
6 3/4 25/16 23/8 1 630 83
*8 7/8 35/16 3 13/8 1200 158
* Throat opening is 1".
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
60 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Size Range — (Fig. 65 and Fig. 66) 3/8", 1/2" and 5/8" rod
Material — Carbon Steel with hardened cup point set screw
and jam nut
Function — Recommended for hanging from steel beam where
flange thickness does not exceed 3/4" (Fig. 65) or 11/4" (Fig. 66).
Features — All steel construction eliminates structural deficien-
cies associated with casting type beam clamps. May be used on
top or bottom flange of the beam. (Beveled lip allows hanging
from top flange where clearance is limited.) May be installed with
set screw in up or down position. Offset design permits unlimited
rod adjustment by allowing the rod to be threaded completely
through the clamp. Open design permits inspection of thread
engagement.
Approvals — Underwriters’ Laboratories Listed in the USA (UL)
and Canada (cUL). Factory Mutual Engineering approved.
Conforms to Federal Specification WW-H-171E, Type 23 and
Manufacturers Standardization Society SP-69, Type 19. Exceeds
requirements of the National Fire Protection Association (NFPA),
Pamphlet 13, 3/8" rod will support 1/2" thru 4" pipe, 1/2" rod will
support 1/2" thru 8" pipe.
Finish — Plain
Note — Available in Electro-Galvanized and HDG finish.
Order By — Figure number, rod size and finish
Fig. 65 Patent #4,570,885
Fig. 65
Dimensions • Weights
Rod Size Max. Rec. Approx.
A B C D E F Load Lbs.* Wt./100
3/8 13/16 3/4 1 7/16 1 610 28
1/2 11/2 3/4 1 9/16 11/4 1130 55
5/8 11/2 3/4 1 9/16 11/4 1130 55
* Max. loads for clamp with set screw in up or down position.
Fig. 66
Dimensions • Weights
Rod Size Max. Rec. Approx.
A B C D E F Load Lbs.* Wt./100
3/8 13/16 11/4 1 7/16 1 610 28
1/2 11/2 11/4 1 9/16 11/4 1130 55
5/8 11/2 11/4 1 9/16 11/4 1130 55
* Max. loads for clamp with set screw in up or down position.
OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330
CUSTOMER SERVICE • 800.786.5266 61
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 9/22/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
62 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 6/01/2003
Fig. 67SS
Stainless Steel Reversible C-Type Beam Clamps
3/4" and 11/4" Throat Openings
Size Range — 3/8" and 1/2" rod sizes
Material — All Stainless Steel (T-316 or T-304)
Function — Recommended for hanging from steel beams where
flange thickness does not exceed 3/4".
Features — All steel construction eliminates structural deficiencies
associated with casting type beam clamps. May be used on top or
bottom flange of the beam. May be installed with the set screw in
up or down position. Offset design permits unlimited rod adjust-
ment by allowing the rod to be threaded completely through the
clamp.
Approvals — Underwriters’ Laboratories LIsted in the USA (UL)
and Canada (cUL). Factory Mutual Engineering approved.
Conforms to Manufacturers’ Standardization Society SP-69, Type
19. Meets or exceeds requirements of the National Fire Protection
Association (NFPA), pamphlet 13, 3/8" rod will support 1/2" through
4" pipe, 1/2" rod will support 1/2" through 8" pipe.
Order By — Figure number and rod size
Fig. 67SS
Dimensions • Weights
Pipe Stock Test Approx.
Size A B C D E F G Size Load Wt./100
1/2 - 4 3/8 17/8 11/2 3/4 3/4 7/8 11/8 5/16 x 1 1500 lbs. 47
5, 6, 8 1/2 17/8 13/4 13/16 3/4 7/8 11/8 3/8 x 11/2 4050 lbs. 84
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 63
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 6/01/2003
Fig. 68SS
Stainless Steel Reversible C-Type Beam Clamps
3/4" and 11/4" Throat Openings
Size Range — 3/8" and 1/2" rod sizes
Material — All Stainless Steel (T-316 or T-304)
Function — Recommended for hanging from steel beams where
flange thickness does not exceed 11/4" (Fig. 68SS).
Features — All steel construction eliminates structural deficiencies
associated with casting type beam clamps. May be used on top or
bottom flange of the beam. May be installed with the set screw in
up or down position. Offset design permits unlimited rod adjust-
ment by allowing the rod to be threaded completely through the
clamp.
Approvals — Underwriters’ Laboratories LIsted in the USA (UL)
and Canada (cUL). Factory Mutual Engineering approved.
Conforms to Manufacturers’ Standardization Society SP-69, Type
19. Meets or exceeds requirements of the National Fire Protection
Association (NFPA), pamphlet 13, 3/8" rod will support 1/2" through
4" pipe, 1/2" rod will support 1/2" through 8" pipe.
Order By — Figure number and rod size
Fig. 68SS
Dimensions • Weights
Pipe Stock Test Approx.
Size A B C D E F Size Load Wt./100
1/2 - 4 3/8 21/16 2 3/4 11/4 11/8 3/8 x 11/2 1500 lbs. 84
5, 6, 8 1/2 21/4 21/4 13/16 11/4 11/4 1/2 x 2 4050 lbs. 170
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
64 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 8/13/2001
Dimensions • Weights
Type Rod Size A Hole Size B
1 3/8 7/16 Specify
1/2 9/16 Specify
2 5/8 11/16 Specify
3/4 13/16 Specify
3 3/8 - 7/8 Specify Specify
* Longer lengths are available, consult factory.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 65
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 8/31/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
66 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Fig. 70
Dimensions • Weights FIG. 70
Rod Max Rec. Approx.
Size Length Load Lbs. Wt./100
1/4 7/8 240 2
5/16 13/4 300 13
3/8 13/4 610 11
1/2 13/4 1130 11
5/8 21/8 1810 16
3/4 21/4 2710 27
7/8 21/2 3770 57
1 23/4 4960 70
11/8" - 11/2" — Consult factory for specifications
FIG. 70R
Fig. 70R
Dimensions • Weights
Rod Max Rec. Approx.
Size Length Load Lbs. Wt./100
3/8 x 1/4 7/8 240 4
1/2 x 3/8 13/4 610 7
5/8 x 1/2 21/8 1130 14
3/4 x 5/8 21/4 1810 21
7/8 x 3/4 21/2 2710 40
FIG. 70S
Fig. 70S/Fig. 71
Dimensions • Weights
Rod Max Rec. Approx.
Size Length Load Lbs. Wt./100
3/8 11/8 610 4
1/2 11/4 1130 6
FIG. 71
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 67
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 3/31/2003
Dimensions • Weights
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
68 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Fig. 81
Fig. 81PVC
Dimensions • Weights
Copper Tube Max. Rec. Approx.
Size A B C D Load Lbs. Wt./100
1/2 3/8 25/8 111/16 5/8 150 27
3/4 3/8 25/8 111/16 5/8 250 29
1 3/8 27/8 113/16 3/4 250 32
11/4 3/8 3 17/8 13/16 250 34
11/2 3/8 35/8 25/16 11/16 250 36
2 3/8 41/2 3 15/8 250 44
21/2 1/2 6 31/4 21/8 350 96
3 1/2 61/8 37/8 2 350 105
31/2 1/2 65/8 41/4 113/16 350 110
4 1/2 71/16 43/8 19/16 400 151
5 1/2 81/2 55/16 17/8 550 220
6 5/8 93/4 59/16 111/16 550 265
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 69
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Fig. 82
Fig. 82PVC
Dimensions • Weights
Copper Tube Max. Rec. Approx.
Size A Bolt Size Load Lbs. Wt./100
1/2 61/2 3/8 75 68
3/4 91/4 3/8 75 69
1 93/8 3/8 120 95
11/4 95/8 3/8 150 101
11/2 10 3/8 150 152
2 10 3/8 150 164
21/2 11 3/8 300 172
3 111/2 3/8 300 184
31/2 12 3/8 300 196
4 13 3/8 300 247
5 14 1/2 400 258
6 15 1/2 500 405
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
70 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Fig. 83
Dimensions • Weights
Fig. 84
Dimensions • Weights
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 71
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Max Rec. Load Lbs.
Rod For Service Temps Approx.
Size 650°F 750°F Wt./100
1/4 240 215 12
3/8 610 540 29
1/2 1130 1010 53
5/8 1810 1610 84
3/4 2710 2420 123
7/8 3770 3360 169
1 4960 4420 222
11/4 8000 7140 360
11/2 11630 10370 510
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
72 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 73
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Max. Rec. Load Lbs.
Rod for Service Temps.
Size D 650°F
3/8 21/2 610
1/2 21/2 1130
5/8 21/2 1810
3/4 3 2710
7/8 31/2 3770
1 4 4960
11/4 5 8000
11/2 6 11630
Dimensions • Weights
Max. Rec. Load Lbs.
Rod for Service Temps.
Size D 650°F
3/8 21/2 240
1/2 21/2 440
5/8 21/2 705
3/4 3 1050
7/8 31/2 1470
1 4 1940
11/4 5 3120
11/2 6 4650
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
74 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod Size Radius Max. Rec.
A B C Load Lbs.
3/8 1/2 21/2 240
1/2 5/8 21/2 440
5/8 3/4 21/2 705
3/4 7/8 21/2 1050
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 75
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
76 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod
Size A B
3/8 2 21/2
1/2 2 21/2
5/8 21/2 21/2
3/4 23/4 21/2
7/8 3 21/2
1 31/2 3
11/8 4 31/2
11/4 41/2 4
11/2 51/4 4
Dimensions • Weights
Rod Thread Length
Size Length Short End Long End
3/8 - 7/8 4" - 8" 11/2 11/2
3/8 - 7/8 8" and up 11/2 21/2
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 77
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 10/24/2001
Dimensions • Weights
Rod B Max. Rec. Load Lbs.
A Min. Embed. (In 3000 lb. Hard Rock Concrete)
Size
5/8 3 31/2 1810
3/4 3 31/2 2710
7/8 3 4 3770
1 3 4 4960
Consult factory for specifications on rod sizes 11/8", 11/4" and 11/2".
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
78 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Design Load Chart for 3000 PSI Hard Rock Concrete Design Load Chart for Light Weight Concrete
Dimensions • Weights Dimensions • Weights
Design Load Design Load Design Load Design Load Design Load Design Load
Vertical Shear 45° Vertical Shear 45°
Rod De De Rod De De
Size A B C (in.)
A B C (in.)
A B C Size A B C (in.)
A B C (in.)
A B C
3/8 1207 457 457 1 675 675 675 2 612 364 385 3/8 905 343 343 7/8 590 590 590 2 547 307 321
1/2 2043 496 496 1.4 912 912 912 2 892 454 454 1/2 1632 372 372 7/8 590 590 590 2 828 323 374
5/8 1690 532 532 1.7 1148 1148 1148 2 967 514 514 5/8 1268 399 399 7/8 590 590 590 2 852 337 419
3/4 2321 567 567 2 1368 1368 1368 2.5 1217 597 567 3/4 1741 426 426 7/8 590 590 590 21/2 1084 350 459
7/8 2321 878 878 4 1596 1596 1596 3 1338 801 801 7/8 1741 656 656 7/8 590 590 590 3 1178 439 654
Note — To hold maximum design load the plate must be installed on top of deck ribs with anchor rod extending
through bottom flute as shown in detail “A”. Inserts can be positioned anywhere on the lower surfaces of metal deck
as shown in details “B” and “C”. Mounting holes are standard. If the plate is not mechanically secured to the deck
ribs, a jamb nut is required to prevent the anchor bolt from laying over when concrete is poured. Design load
vertical values are for vertical support applications only. Use Design Load 45° and Design Load Shear values for
attachment of seismic bracing. Seismic brace attachments must be securely tight to the underside of concrete deck.
Structural Engineer shall verify adequacy of concrete or metal deck for the tabulated allowable loads. Minimum edge
distance: 6 bolt diameters. Minimum distance between inserts: 12 bolt diameters.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 79
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 8/13/2001
Dimensions • Weights
Rod Design Load Vertical Design Load Shear Design Load 45° “E” Embedment De
Size Hard Rock Lt. Wt. Hard Rock Lt. Wt. Hard Rock Lt. Wt. Depth min. (in.)
3/8 1255 735 978 733 777 525 31/2 2
1/2 2321 1392 978 733 980 679 31/2 2
5/8 780 468 1278 958 688 445 4 2
3/4 1346 806 1278 958 927 619 4 21/2
7/8 2321 1392 1278 958 1166 803 4 6
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
80 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Max. Rec. Load Lbs.
Rod Pipe for Service Temps. Approx.
Size A Size B C D E F 650°F 750°F Wt./100
1/4 1/2 15/16 13/16 23/4 21/8 25/16 485 435 11
1/4 3/4 11/8 13/8 23/4 21/8 27/32 485 435 12
1/4 1 13/8 15/8 23/4 21/8 23/32 485 738 12
3/8 11/4 111/16 21/16 27/8 21/8 21/32 1220 1090 28
3/8 11/2 2 23/8 3 21/2 21/16 1200 1090 30
3/8 2 27/16 213/16 31/4 21/2 21/16 1220 1090 33
1/2 21/2 215/16 37/16 33/4 3 25/16 2260 2020 85
1/2 3 39/16 41/16 4 3 21/4 2260 2020 93
1/2 31/2 41/16 49/16 41/4 3 21/4 2260 2020 101
1/2 4 49/16 51/16 41/2 3 21/4 2260 2020 110
1/2 5 55/8 61/8 5 3 27/32 2260 2020 124
5/8 6 63/4 73/8 61/8 33/4 213/16 3620 3230 200
5/8 8 83/4 93/8 71/8 33/4 213/16 3620 3230 230
3/4 10 107/8 115/8 83/8 4 3 5420 4830 486
7/8 12 127/8 133/4 95/8 41/4 31/4 7540 6730 790
7/8 14 141/8 15 101/4 41/4 31/4 7540 6730 850
7/8 16 161/8 17 111/4 41/4 31/4 7540 6730 935
1 18 181/8 191/8 125/8 43/4 35/8 9920 8850 1360
1 20 201/8 211/8 135/8 43/4 35/8 9920 8850 1476
1 24 241/8 251/8 155/8 43/4 35/8 9920 8850 1698
1 30 301/8 311/8 185/8 43/4 35/8 9920 8850 2027
1 36 361/8 371/8 215/8 43/4 35/8 9920 8850
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 81
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod Pipe Max. Design Approx.
Size A Size B C D E Load Lbs. Wt./100
1/4 1/2 15/16 13/16 115/16 13/4 485 8
1/4 3/4 11/8 13/8 21/16 13/4 485 8
1/4 1 13/8 15/8 23/16 13/4 485 9
1/4 11/4 111/16 115/16 23/8 13/4 485 9
1/4 11/2 2 21/4 27/16 13/4 485 10
1/4 2 27/16 211/16 211/16 13/4 485 11
3/8 21/2 215/16 35/16 31/16 2 1220 31
3/8 3 39/16 315/16 33/8 2 1220 33
3/8 31/2 41/16 47/16 35/8 2 1220 40
3/8 4 49/16 415/16 37/8 2 1220 40
3/8 5 55/8 6 49/16 21/4 1220 47
1/2 6 63/4 71/4 51/16 21/4 2260 125
1/2 8 83/4 91/4 61/16 21/4 2260 156
5/8 10 107/8 111/2 71/4 21/2 3620 318
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
82 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Fig. 113 - Standard Hex Nut Fig. 114 - Heavy Hex Nut
Size Range — Size1/4" thru 1 /2" 1
Size Range — Size1/4" thru 11/2"
Material — Carbon Steel Material — Carbon Steel
Finish — Plain Finish — Plain
Note — Available in Electro-Galvanized and HDG Note — Available in Electro-Galvanized and HDG finish
finish or Stainless Steel materials. or Stainless Steel materials.
Order By — Figure number size and finish
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 83
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
84 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Fastener Max Rec.
Size A Size Load Lbs.***
3/4 5/16 16 x 2* 250
1 5/16 16 x 2* 250
11/4 5/16 16 x 2* 250
11/2 5/16 16 x 2* 250
2 5/16 16 x 2* 250
21/2 3/8 3/8 x 21/2** 320
3 3/8 3/8 x 21/2** 320
31/2 3/8 3/8 x 21/2** 560
4 3/8 1/2 x 3** 560
5 1/2 1/2 x 3** 560
6 1/2 1/2 x 3** 760
8 1/2 5/8 X 3**
* Drive screw
** Lag bolt
*** With minimum safety factor of 5
Fastener schedule per NFPA
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 85
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
86 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 87
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 3/31/2003
Fig. 122 - Wood Screw Flat Head Fig. 123 - Toggle Bolt
Fig. 124 - Spring Toggle Head Only Fig. 125 - Drive Screw
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
88 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 1/13/2004
Dimensions • Weights
Size Beam Dimensions Approx.
130- A H W Wt./100
1 31/4 11/2 25/16 65
2 31/2 13/4 21/2 70
3 31/4 11/2 13/4 58
4 31/2 11/2 31/2 83
5† 35/8 13/4 31/2 86
6† 41/2 21/2 37/8 101
* Max. Rec. Load 500 lbs.
**Safety Factor of 5
† Larger bolts and I-rods are required for 5" and 6" pipe sizes
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 89
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Rod Size Max. Rec. Approx.
Size Inch Metric A B Load Lbs. Length
1/2 3/8 8mm or 10mm 31/8 25/8 400 11
3/4 3/8 8mm or 10mm 31/8 21/2 400 11
1 3/8 8mm or 10mm 33/8 25/8 400 12
11/4 3/8 8mm or 10mm 33/4 27/8 400 13
11/2 3/8 8mm or 10mm 37/8 27/8 400 14
2 3/8 8mm or 10mm 41/2 3 400 15
21/2 3/8 10mm 55/8 41/8 600 27
3 3/8 10mm 57/8 4 600 29
31/2 3/8 10mm 73/8 51/4 600 34
4 3/8 10mm 73/8 5 1000 35
5 1/2 12mm 91/8 61/4 1250 66
6 1/2 12mm 101/8 63/4 1250 73
8 1/2 12mm 131/8 83/4 1250 136
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
90 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 91
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 11/30/2001
Dimensions • Weights
Pipe Rod Size Max. Rec. Approx.
Size A B C Load Lbs. Length
1/2 3/8 21/2 2 400 8
3/4 3/8 21/2 2 400 8
1 3/8 27/8 21/8 400 9
11/4 3/8 33/8 21/2 400 10
11/2 3/8 31/2 21/2 400 11
2 3/8 33/4 21/2 400 12
21/2 3/8 51/8 35/8 600 24
3 3/8 53/8 31/2 600 27
31/2 3/8 63/4 45/8 600 32
4 3/8 63/4 41/2 1000 33
5 1/2 83/8 51/2 1250 60
6 1/2 93/8 6 1250 68
8 1/2 123/8 8 1250 130
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
92 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Rod Size Max. Rec. Approx.
Size Rod Size A B C Load Lbs. Wt./100
1/2 3/8 31/8 23/4 11/2 400 11
3/4 3/8 31/8 25/8 11/4 400 11
1 3/8 31/8 21/2 1 400 12
11/4 3/8 31/4 21/2 1 400 13
11/2 3/8 37/8 3 11/4 400 14
2 3/8 41/2 33/8 11/2 400 15
21/2 3/8* 51/2 43/8 2 600 40
3 1/2 63/8 43/4 2 600 45
31/2 1/2 63/8 41/2 11/2 600 52
4 1/2* 73/8 51/4 2 1250 59
5 5/8 83/8 53/4 2 1250 97
6 5/8 91/2 63/8 11/8 1250 139
* 21/2" CT filled with water weighs less than 2" IP filled with water, 4" CT less than
31/2" IP with water. 21/2" CT available with 1/2" thread and 4" CT available with
5/8" thread for Government Specs.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 93
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Max. Rec. Approx.
Size Rod Size A B C Load Lbs. Wt./100
1/2 3/8 31/8 25/8 13/8 400 11
3/4 3/8 31/8 21/2 11/8 400 11
1 3/8 33/8 25/8 11/8 400 12
11/4 3/8 31/4 21/2 1 400 13
11/2 3/8 37/8 27/8 1 400 14
2 3/8 41/4 3 1 400 15
21/2 3/8 53/4 41/4 15/8 600 40
3 1/2 6 41/8 11/4 600 45
31/2 1/2 73/8 51/4 21/8 600 52
4 1/2 73/8 5 15/8 1250 59
5 5/8 9 61/8 21/4 1250 97
6 3/4 93/8 61/2 17/8 1250 139
8 7/8 131/8 83/4 31/4 1250 145
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
94 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 95
www.tolco.com
™
www.tolco.com
®
Revision 5/24/2001
a brand of
Dimensions • Weights
Shield Max. O.D. of Rib Hanger Approx.
Size Insulation Space Size Wt./100
1 23/8 2 2 44
2 25/8 2 21/2 48
3 27/8 2 21/2 52
4 31/2 2 3 63
5 4 2 31/2 71
6 41/2 2 4 81
7 5 2 5 90
8 55/8 2 6 101
9 6 2 6 106
10 65/8 2 6 120
11 75/8 2 8 204
12 85/8 2 8 229
13 95/8 2 10 220
14 103/4 2 10 286
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
96 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Shield Size
Inside Dia. (in.) Stock Shield Length Approx
A Size L Wt./100
2.38 18ga 12 69
2.88 18ga 12 84
3.50 18ga 12 99
4.00 18ga 12 114
4.50 18ga 12 129
5.00 18ga 12 142
5.56 18ga 12 160
6.64 16ga 12 190
7.65 16ga 12 268
8.64 16ga 12 305
7.65 16ga 18 403
8.64 16ga 18 457
9.64 16ga 18 510
10.76 16ga 18 563
11.76 14ga 24 1018
12.76 14ga 24 1108
14.00 14ga 24 1190
15.00 14ga 24 1276
16.00 14ga 24 1359
17.00 14ga 24 1450
18.00 12ga 24 2124
19.00 12ga 24 2241
20.00 12ga 24 2358
21.00 12ga 24 2475
22.00 12ga 24 2592
23.00 12ga 24 2709
24.00 12ga 24 2862
26.00 12ga 24 3060
27.00 12ga 24 3177
28.00 12ga 24 3303
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 97
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
98 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Insulation Thickness
1" 11/2" 2" 21/2"
Pipe
Size S D L S D L S D L S D L
1/2" 167 334 10 305 610 10 352 352 10 352 352 10
3/4" 192 385 13 339 440 13 440 440 13 440 440 13
1" 227 445 20 385 551 20 551 551 20 551 551 20
11/4" 227 554 29 449 695 29 662 695 29 695 695 29
11/2" 315 629 36 496 796 36 770 796 36 796 796 36
2" 379 757 50 571 1143 51 804 1492 51 1076 1492 51
21/2" 479 940 78 683 1365 78 935 1806 78 1227 1806 78
3" 598 1197 107 836 1671 107 1113 2199 107 1429 2199 107
4" 836 1671 163 1113 2225 163 1429 2827 163 1785 2827 163
5" 1131 2263 232 1408 2816 232 1809 3495 232 2296 3485 232
6" 1471 2943 314 1832 3665 314 2233 4163 314 3483 4163 314
8" — — — 2858 5715 501 3370 6741 501 3925 7851 501
10" — — — 3998 7995 745 4600 9201 745 5245 10132 745
12" — — — 3934 7868 1021 4449 8899 1021 4997 9993 1021
14" — — — 4583 9166 1215 5138 10276 1215 5725 11450 1215
16" — — — 5725 11450 1595 6344 12687 1595 6994 13987 1595
18" — — — 6994 13987 2022 7676 15351 2022 8389 16779 2022
Legend:
S — Maximum load allowable on single saddle ie, 244H or 244C
D — Maximum load allowable on double saddle ie, 244HR or 244CR
L — Actual load on 10 ft. spacing
Notes:
1. These values are good for flat surfaces, roller hangers and clevis hangers.
2. The values listed in this table take into consideration maximum crushing load on calcium silicate insert.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 99
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Actual
Pipe Insulation Use with Roller Max. Rec. Approx.
Size A B C Thickness 324 326 327/328 Load Lbs.* Wt./100
3/4 113/16 25/16 27/16 15/16 21/2 2 2 - 31/2 1200 141
1 115/16 27/16 25/8 11/8 3 21/2 2 - 31/2 1200 141
11/4 21/16 29/16 23/4 15/16 3 21/2 2 - 31/2 1200 141
11/2 23/16 23/4 215/16 11/16 4 3 2 - 31/2 1200 167
2 27/16 3 31/8 11/16 4 31/2 2 - 31/2 1200 167
21/2 211/16 31/4 37/16 11/16 5 31/2 2 - 31/2 1200 178
3 3 33/4 33/4 11/16 5 4 2 - 31/2 1200 178
31/2 31/2 41/4 41/4 15/16 6 5 4 - 6 1800 247
4 33/4 41/2 49/16 11/16 6 5 4 - 6 1800 247
5 45/16 5 51/8 11/16 8 6 4 - 6 1800 247
6 49/16 55/16 53/8 1 8 8 4 - 6 1800 371
8 55/8 61/2 61/2 11/16 10 10 8 - 10 1800 442
* Maximum recommended loads are based on a safety factor of 5 and are applicable only when saddle is used on a flat bearing surface. When
saddle is used with a pipe roll, the maximum load given for the pipe roll applies to the saddle.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
100 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Actual
Pipe Insulation Use with Roller Max. Rec. Approx.
Size A B C Thickness 324 326 327/328 Load Lbs.* Wt./100
3/4 25/16 27/8 3 19/16 31/2 3 2 -
31/2 1200 212
1 27/16 3 31/8 19/16 4 3 2 -
31/2 1200 212
11/4 211/16 31/4 33/8 15/8 5 31/2 2 -
31/2 1200 244
11/2 23/4 35/16 37/16 15/8 5 31/2 2 -
31/2 1200 244
2 3 311/16 33/4 15/8 5 4 2 -
31/2 1200 244
21/2 37/16 41/4 43/16 17/8 6 5 2 -
31/2 1200 284
3 33/4 41/2 49/16 19/16 6 5 2 -
31/2 1200 284
31/2 315/16 415/16 43/4 113/16 8 6 4 -
6 1800 321
4 43/16 5 5 19/16 8 6 4 -
6 1800 321
5 43/4 59/16 59/16 19/16 10 8 4 -
6 1800 321
6 51/16 57/8 515/16 11/2 12 8 8 -
10 1800 442
8 63/16 71/4 71/8 19/16 14 10 8 -
10 1800 590
10 71/4 81/2 85/16 15/8 16 12 8 -
10 1800 590
12 83/16 911/16 95/16 15/8 18 14 12 -
14 5000 779
14 813/16 105/16 101/16 11/2 20 16 12 -
14 5000 779
16 93/4 113/8 111/16 11/2 24 18 16 -
20 5000 853
18 103/4 129/16 121/16 11/2 24 20 16 -
20 5000 912
20 113/4 135/8 121/8 11/2 — 24 24 7200 1044
24 133/4 16 155/16 11/2 — 30 30 7200 1183
30 163/4 191/4 181/2 11/2 — — 36 - 42 7200 1331
36 203/16 — 211/16 11/2 — — 36 - 42 7200 1695
* Maximum recommended loads are based on a safety factor of 5 and are applicable only when saddle is used on a flat bearing surface. When
saddle is used with a pipe roll, the maximum load given for the pipe roll applies to the saddle.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 101
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Actual
Pipe Insulation Use with Roller Max. Rec. Approx.
Size A B C Thickness 324 326 327/328 Load Lbs.* Wt./100
3/4 213/16 31/2 39/16 21/16 5 4 2 - 31/2 1200 279
1 215/16 311/16 311/16 21/16 5 4 2 - 31/2 1200 279
11/4 31/8 37/8 37/8 21/16 5 4 2 - 31/2 1200 279
11/2 37/16 41/8 43/16 25/16 5 5 4-6 1800 319
2 35/8 45/16 47/16 25/16 6 5 4-6 1800 319
21/2 315/16 411/16 43/4 25/16 6 6 4-6 1800 340
3 41/4 5 51/16 21/16 8 6 4-6 1800 340
31/2 47/16 53/16 51/4 25/16 8 8 4-6 1800 359
4 411/16 51/2 51/2 21/16 8 8 4-6 1800 359
5 53/16 6 61/8 21/16 10 8 8 - 10 1800 359
6 59/16 61/2 61/2 21/16 10 10 8 - 10 1800 574
8 69/16 75/8 79/16 21/16 12 10 8 - 10 1800 637
10 711/16 91/8 87/8 21/8 16 14 12 - 14 1800 761
12 813/16 101/4 103/16 21/8 18 16 16 - 20 5000 970
14 97/16 1015/16 1013/16 2 18 16 16 - 20 5000 970
16 105/16 12 113/4 2 20 18 16 - 20 5000 1046
18 115/16 13 123/4 2 24 20 16 - 20 7200 1046
20 125/16 143/16 133/4 2 24 24 24 7200 1157
24 145/16 169/16 157/8 2 — 30 30 7200 1333
30 175/16 20 191/8 2 — — 36 - 42 7200 1492
36 207/16 — 223/8 2 — — 36 - 42 7200 1723
* Maximum recommended loads are based on a safety factor of 5 and are applicable only when saddle is used on a flat bearing surface. When
saddle is used with a pipe roll, the maximum load given for the pipe roll applies to the saddle.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
102 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
®
Dimensions • Weights
Actual
Pipe Insulation Use with Roller Max. Rec. Approx.
Size A B C Thickness 324 326 327/328 Load Lbs.* Wt./100
11/4 33/4 41/2 49/16 213/16 6 5 4 -
6 1200 369
11/2 37/8 45/8 43/4 213/16 8 6 4 -
6 1800 369
2 41/8 415/16 415/16 213/16 8 6 4 -
6 1800 369
21/2 47/16 53/16 51/4 23/4 8 8 4 -
6 1800 406
3 43/4 59/16 55/8 23/4 8 8 4 -
6 1800 406
31/2 415/16 57/8 513/16 213/16 10 8 8 -
10 1800 446
4 53/16 61/8 61/16 213/16 10 8 8 -
10 1800 446
5 53/4 63/4 63/8 213/16 10 10 8 -
10 1800 446
6 61/16 71/8 7 29/16 12 10 8 -
10 1800 653
8 71/4 83/8 83/8 211/16 14 12 12 -
14 1800 721
10 83/16 911/16 97/16 25/8 16 14 12 -
14 1800 821
12 91/4 103/4 105/8 25/8 18 16 16 -
20 5000 1048
14 97/8 111/2 111/4 25/8 20 18 16 -
20 5000 1048
16 103/4 129/16 1213/16 21/2 24 20 16 -
20 7200 1112
18 113/4 135/8 131/8 21/2 24 20 24 7200 1235
20 123/4 145/8 141/8 21/2 — 24 24 7200 1235
24 143/4 17 163/8 21/2 — 30 30 7200 1430
30 173/4 203/8 1911/16 21/2 — — 36 - 42 7200 1314
36 2013/16 — 227/8 21/2 — — 36 - 42 7200 1857
* Maximum recommended loads are based on a safety factor of 5 and are applicable only when saddle is used on a flat bearing surface. When
saddle is used with a pipe roll, the maximum load given for the pipe roll applies to the saddle.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 103
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Actual
Pipe Insulation Use with Roller Max. Rec. Approx.
Size A B C Thickness 324 326 327/328 Load Lbs.* Wt./100
11/2 41/2 53/8 55/16 35/16 8 8 4 -
6 1500 449
2 43/4 53/8 59/16 35/16 8 6 4 -
6 1800 449
21/2 5 57/8 513/16 23/4 10 8 4 -
6 1800 470
3 51/16 61/4 61/4 31/16 10 8 8 -
10 1800 470
31/2 51/2 67/16 63/8 33/8 10 10 8 -
10 1800 491
4 53/4 611/16 611/16 31/8 10 10 8 -
10 1800 491
5 65/16 71/4 71/4 31/8 12 10 8 -
10 1800 491
6 65/8 73/4 79/16 31/16 12 12 12 -
14 1800 773
8 75/8 87/8 87/8 31/8 16 14 12 -
14 1800 773
10 811/16 101/8 101/16 31/8 18 16 16 -
20 1800 884
12 911/16 115/16 111/16 31/8 20 18 16 -
20 5000 1141
14 105/16 12 113/4 3 20 18 16 -
20 5000 1140
16 115/16 1313/16 1211/16 3 24 24 24 7200 1317
18 125/16 143/16 1311/16 3 24 24 24 7200 1317
20 135/16 155/16 157/8 3 — 24 30 7200 1450
24 155/16 179/16 1615/16 3 — 30 30 7200 1564
30 185/16 — 205/16 3 — — 36 - 42 7200 1765
36 215/16 — 235/16 3 — — 36 - 42 7200 1954
* Maximum recommended loads are based on a safety factor of 5 and are applicable only when saddle is used on a flat bearing surface. When
saddle is used with a pipe roll, the maximum load given for the pipe roll applies to the saddle.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
104 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Actual
Pipe Insulation Use with Roller Max. Rec. Approx.
Size A B C Thickness 324 326 327/328 Load Lbs.* Wt./100
4 65/8 73/4 79/16 43/16 12 10 8 -
10 1800 611
5 73/16 81/8 83/16 43/16 14 12 8 -
10 1800 611
6 711/16 91/8 87/8 43/16 16 14 12 -
14 1800 1020
8 811/16 101/8 10 43/16 18 16 12 -
14 1800 1020
10 911/16 105/16 111/16 41/8 20 18 16 -
20 1800 1084
12 103/4 129/16 121/4 41/8 — 20 16 -
20 5000 1400
14 113/8 131/4 127/8 4 — 20 16 -
20 5000 1400
16 125/16 1413/16 133/4 4 — 24 24 7200 1528
18 135/16 153/16 143/4 4 — 24 24 7200 1528
20 145/16 169/16 1513/16 4 — 30 30 7200 1707
24 165/16 187/8 1713/16 4 — 30 30 7200 1835
30 195/16 — 215/16 3 — — 36 - 42 7200 2042
36 225/16 — 245/8 4 — — 36 - 42 7200 2237
* Maximum recommended loads are based on a safety factor of 5 and are applicable only when saddle is used on a flat bearing surface. When
saddle is used with a pipe roll, the maximum load given for the pipe roll applies to the saddle.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 105
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Copper Rod Size Max. Rec. Approx.
Tube Size A B Load Lbs. Wt./100
1/2 3/8 3/4 180 10
3/4 3/8 7/8 180 12
1 3/8 7/8 180 14
11/4 3/8 11/8 180 16
11/2 3/8 11/4 180 21
2 3/8 11/2 180 25
Dimensions • Weights
Pipe Rod Size Max. Rec. Approx.
Size A B Load Lbs. Wt./100
3/8 3/8 7/8 180 10
1/2 3/8 7/8 180 12
3/4 3/8 7/8 180 14
1 3/8 11/8 180 17
11/4 3/8 15/16 180 21
11/2 3/8 13/8 180 24
2 3/8 111/16 180 29
21/2 1/2 23/16 300 58
3 1/2 21/2 300 75
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
106 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Bolt Max. Rec. Approx.
Size A Size Load Lbs. Wt./100
3/8 3/4 1/4 200 6
1/2 7/8 1/4 200 8
3/4 1 1/4 300 9
1 11/4 1/4 300 10
11/4 11/2 1/4 300 16
11/2 13/4 1/4 300 24
2 2 1/4 300 33
21/2 23/8 1/4 450 45
3 213/16 5/16 450 65
31/2 31/8 5/16 450 74
4 35/8 3/8 520 86
5 43/16 3/8 520 135
6 5 3/8 800 178
8 63/16 1/2 1600 314
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 107
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 9/22/2001
Dimensions • Weights
304 305
Rod Max. Rec. Load Lbs. Approx. Approx.
Size A B C D E F Bolt Size 650°F 750°F Wt./100 Wt./100
3/8 7/8 2 2 11/4 9/16 7/16 1/2 x 21/2 610 510 86 107
1/2 7/8 2 2 11/4 11/16 9/16 5/8 x 21/2 1130 940 83 118
5/8 1 2 2 11/4 13/16 11/15 3/4 x 23/4 1810 1510 84 140
3/4 11/8 2 21/2 11/2 15/16 13/16 7/8 x 3 2710 2260 174 261
7/8 11/4 3 21/2 2 11/8 15/16 1 x 4 3770 3150 232 374
1 11/2 3 3 2 11/4 11/8 11/8 x 41/2 4960 4150 394 595
11/4 2 3 4 21/2 15/8 13/8 11/2 x 53/4 8000 6660 738 1026
11/2 21/2 4 5 3 17/8 15/8 13/4 x 61/2 11630 9700 1449 1892
13/4 23/4 5 5 33/4 21/8 17/8 2 x 73/4 15700 14000 1747 2437
2 31/4 5 6 33/4 23/8 21/8 21/4 x 73/4 20700 18460 2201 3074
21/4 31/2 6 6 41/2 25/8 2 21/2 x 73/4 27200 24260 2523 3601
21/2 33/4 6 6 41/2 27/8 23/8 23/4 x 8 33500 29880 2552 3898
*23/4 4 53/4 6 33/4 31/8 — 3 x 75/8 41580 37066 2675 4202
*3 4 61/4 7 33/4 33/8 — 31/4 x 75/8 50580 45085 3250 5043
*31/4 41/2 7 7 41/4 35/8 — 31/2 x 81/2 60480 53906 4500 6817
*31/2 41/2 71/2 8 41/4 37/8 — 33/4 x 81/2 71280 63493 5320 7980
Note: Sizes 3/8" thru 1" furnished with machine bolt; sizes 11/4" thru 31/2" furnished with pin and cotter.
* Welded Plate
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
108 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod Size Max. Rec. Approx.
Pipe Size A B C D Load Lbs. Wt./100
1/2 - 2 3/8 2 33/4 7/16 610 28
21/2 - 31/2 1/2 2 33/4 7/16 725 31
4-5 5/8 21/2 5 9/16 710 72
6 3/4 21/2 5 9/16 860 70
Dimensions • Weights
Rod Size Max. Rec. Approx.
Pipe Size A B C Load Lbs. Wt./100
1/2 - 2 3/8 1/4 15/16 570 7
21/2 - 31/2 1/2 1/4 11/2 1130 13
4-5 5/8 3/8 13/4 1400 19
6 3/4 1/2 21/8 1900 31
8 7/8 1/2 23/8 2200 44
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 109
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 1/13/2004
Dimensions • Weights
Max. Rec. Approx.
Rod Size* Load Lbs.* Wt./100
Insert Only 3/8 - 7/8 1140 130
* See Fig. 309N
† Based on minimum safety factor of 5. Rating is subject to the condition that the
concrete used is of sufficient strength to hold the insert.
Dimensions • Weights
Max. Rec. Approx.
Rod Size* Load Lbs.* Wt./100
3/8 610 20
1/2 1130 21
5/8 1140 20
3/4 1140 22
7/8 1140 21
† Based on minimum safety factor of 5. Rating is subject to the condition that the
concrete used is sufficient strength to hold the insert.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
110 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Max. Rec. Approx.
Rod Size Load Lbs.* Wt./100
1/4 240 8
3/8 600 13
1/2 600 12
5/8 600 11
3/4 600 10
7/8 600 9
* Based on straight pull of 600 lbs. when used with Fig. 310.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 111
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Bolt
Size A B C D E F Size
4 7 313/16 2 23/8 21/2 3/4 1/2
5 85/8 43/16 2 23/8 21/2 3/4 1/2
6 11 47/8 2 23/8 21/2 7/8 5/8
8 127/8 615/16 2 23/8 21/2 1 5/8
10 161/4 715/16 2 23/8 21/2 1 3/4
12 181/4 91/8 3 23/8 21/2 1 3/4
14 193/4 101/2 3 27/8 3 11/8 3/4
16 223/4 111/2 3 27/8 3 11/8 3/4
18 257/8 131/2 4 33/4 4 11/4 3/4
20 273/4 141/2 4 33/4 4 13/8 3/4
22 293/4 151/2 4 33/4 4 13/8 3/4
24 33 171/2 4 33/4 4 15/8 7/8
26 35 181/2 4 33/4 4 2 7/8
30 413/8 205/8 4 33/4 4 2 7/8
32 433/8 215/8 4 33/4 4 2 7/8
36 473/8 235/8 4 33/4 4 2 7/8
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
112 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Max. O.D. A Use with Fig. 316 Approx.
Pipe Size Pipe Min. Max. B Stand Pipe Size Wt./100
2 23/8 23/4 6 7/8 1 210
21/2 27/8 31/4 61/2 7/8 1 219
3 4 31/2 63/4 7/8 1 240
31/2 4 31/2 63/4 7/8 1 240
4 47/8 41/4 71/2 1 1 340
5 55/8 41/2 73/4 1 1 360
6 7 55/8 83/8 11/4 11/4 580
8 91/8 63/4 91/2 11/4 11/4 640
10 111/8 8 10 11/4 11/4 1060
12 131/2 91/4 111/4 11/4 11/4 1060
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 113
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Max. O.D. A Use with Fig. 316 Approx.
Pipe Size Pipe Min. Max. B C Stand Pipe Size Wt./100
2 23/8 23/4 6 7/8 3/8 1 210
21/2 27/8 31/4 61/2 7/8 3/8 1 219
3 4 31/2 63/4 7/8 1/2 1 240
31/2 4 31/2 63/4 7/8 1/2 1 240
4 47/8 41/4 71/2 1 1/2 1 340
5 55/8 41/2 73/4 1 1/2 1 360
6 7 55/8 83/8 11/4 5/8 11/4 580
8 91/8 63/4 91/2 11/4 5/8 11/4 640
10 111/8 8 10 11/4 3/4 11/4 1060
12 131/2 91/4 111/4 11/4 7/8 11/4 1060
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
114 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe
Size A B C D E H
4 6 /8
7
2 6 /8
3
2 /8
3
2 /2
1
3/4
5 73/8 2 71/16 23/8 21/2 7/8
6 77/8 2 73/4 23/8 21/2 7/8
8 101/8 2 99/16 23/8 21/2 7/8
10 113/8 2 8 23/8 21/2 1
12 127/8 3 91/2 23/8 21/2 1
14 15 3 183/16 27/8 3 11/8
16 161/4 3 165/8 27/8 3 11/8
18 18 4 1711/16 33/4 4 11/4
20 191/4 4 153/4 33/4 4 11/4
22 201/4 4 165/16 33/4 4 13/8
24 221/2 4 183/8 33/4 4 13/8
26 235/8 4 171/8 33/4 4 13/8
30 257/8 4 163/8 33/4 4 13/8
32 273/8 4 175/8 33/4 4 15/8
36 291/2 4 171/2 33/4 4 15/8
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 115
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe IPS Use with Fig. 316 Approx.
Size A B C D Stand Pipe Size Wt./100
4 105/8 8 6 11/2 2 210
6 1111/16 8 6 11/2 2 219
8 1211/16 8 6 2 21/2 240
10 133/4 8 6 2 21/2 240
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
116 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
®
Revision 5/24/2001
a brand of
Dimensions • Weights
Stand Pipe Approx.
Size A H Plate Size Wt./100*
1 1 1/2 6 sq. 423
11/4 1 1/2 6 sq. 482
11/2 1 1/2 6 sq. 525
2 1 1/2 6 sq. 748
21/2 11/8 5/8 71/2 sq. 1377
3 11/8 5/8 9 sq. 1555
4 11/4 3/4 11 sq. 2514
6 11/2 7/8 131/2 sq. 4469
8 11/2 1 16 sq. 10120
* Weight is based on “L” dimension of 1'0"
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 117
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Max. O.D. Approx.
Pipe Size Pipe A B C D Wt./100
11/2 2 21/4 1* 2 1 127
2 23/8 27/16 1* 2 1 131
21/2 27/8 211/16 11/2* 2 11/2 149
3 31/2 3 11/2* 2 11/2 162
31/2 4 31/4 11/2* 2 11/2 178
4 47/8 313/16 23/8 3 21/2 455
5 55/8 43/16 23/8 3 21/2 489
6 7 47/8 23/8 3 21/2 550
8 91/8 615/16 23/8 4 21/2 790
10 111/8 715/16 23/8 4 21/2 872
12 131/2 91/8 23/8 4 21/2 1007
14 14 101/2 27/8 4 3 1541
16 16 111/2 27/8 4 3 1680
18 18 131/2 33/4 4 4 2220
20 20 141/2 33/4 4 4 2415
22 22 151/2 33/4 4 4 2600
24 24 171/2 33/4 4 4 2970
26 26 181/2 33/4 4 4 3172
30 30 205/8 33/4 4 4 4047
32 32 215/8 33/4 4 4 4230
36 36 235/8 33/4 4 4 4608
* For pipe sizes 11/2" thru 31/2", a rod shank is used.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
118 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe A B C C Approx.
Size Stand Pipe Size Adj. Pipe Size Min. Max. Wt./100
21/2 2 11/2 7 111/2 453
3 2 11/2 75/16 1113/16 466
31/2 2 11/2 79/16 121/16 482
4 3 21/2 101/4 143/4 1248
5 3 21/2 111/16 159/16 1282
6 3 21/2 119/16 161/16 1343
8 3 21/2 139/16 181/16 1583
10 3 21/2 145/8 191/8 1665
12 3 21/2 155/8 201/8 1800
14 4 3 187/8 233/8 2761
16 4 3 197/8 243/8 2900
18 6 4 221/4 263/4 4468
20 6 4 231/4 273/4 4663
22 6 4 241/4 283/4 4848
24 6 4 261/2 31 5218
26 6 4 271/2 32 5420
30 6 4 295/8 341/8 6295
32 6 4 305/8 351/8 6478
36 6 4 325/8 371/8 6856
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 119
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 9/22/2001
Dimensions • Weights
Max. O.D. Approx.
Pipe Size Pipe A B C D Wt./100
4 47/8 313/16 23/8 1/2 21/2 620
5 55/8 43/16 23/8 1/2 21/2 660
6 7 47/8 23/8 5/8 21/2 835
8 91/8 615/16 23/8 5/8 21/2 1120
10 111/8 715/16 23/8 3/4 21/2 1400
12 131/2 91/8 23/8 7/8 3 1800
14 14 101/2 27/8 7/8 3 2930
16 16 111/2 27/8 7/8 3 3225
18 18 131/2 33/4 1 4 3960
20 20 141/2 33/4 1 4 4309
22 22 151/2 33/4 1 4 4660
24 24 171/2 33/4 1 4 5188
26 26 181/2 33/4 1 4 5520
30 30 205/8 33/4 1 4 6948
32 32 215/8 33/4 1 4 7327
36 36 235/8 33/4 1 4 8046
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
120 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Fig. 318A - Pipe Saddle with U-Bolt and Threaded Pipe Adjuster
Size Range — 4" thru 36" pipe
Material — Carbon Steel with cast iron
reducer
Function — Designed to support horizon-
tal pipe from floor stanchion where verti-
cal adjustment is required. U-bolt and
hex nuts are provided to hold pipe
securely to saddle. To complete floor
stanchion, use with Fig. 316T Threaded
Pipe Stand.
Approvals — Conforms to Federal
Specification
WW-H-171E, Type 38, 4" thru 36", and
Manufacturers Standardization Society
SP-69, Type 37
Finish — Plain
Note — Available in Electro-Galvanized
and HDG finish or Stainless Steel
materials.
Order By — Figure number, pipe size,
adjuster size and finish
Note — Order with TOLCO™ Fig. 316T
for complete stanchion support.
Dimensions • Weights
Pipe A B C C Approx.
Size Stand Pipe Size Adj. Pipe Size Min. Max. Wt./100
4 3 21/2 101/4 143/4 1413
5 3 21/2 111/16 159/16 1453
6 3 21/2 119/16 161/16 1628
8 3 21/2 139/16 181/16 1913
10 3 21/2 145/8 191/8 2193
12 3 21/2 155/8 201/8 2593
14 4 3 187/8 233/8 4150
16 4 3 197/8 243/8 4445
18 6 4 221/4 263/4 4468
20 6 4 231/4 273/4 6557
22 6 4 241/4 283/4 6908
24 6 4 261/2 31 7436
26 6 4 271/2 32 7768
30 6 4 295/8 341/8 9196
32 6 4 305/8 351/8 9575
36 6 4 325/8 371/8 10294
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 121
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Adjuster Pipe Max. O.D. A B C C Approx.
Size Size of Pipe Pipe Size Pipe Size Min. Max. Wt./100
11/2 x 2 21/2 27/8 2 11/2 7 111/2 304
11/2 x 2 3 31/2 2 11/2 75/16 1113/16 304
11/2 x 2 31/2 4 2 11/2 79/16 121/16 304
21/2 x 3 4 47/8 3 21/2 101/4 143/4 793
21/2 x 3 5 55/8 3 21/2 111/16 159/16 793
21/2 x 3 6 7 3 21/2 119/16 161/16 793
21/2 x 3 8 91/8 3 21/2 139/16 181/16 793
21/2 x 3 10 111/8 3 21/2 145/8 191/8 793
21/2 x 3 12 131/2 3 21/2 155/8 201/8 793
3 x 4 14 14 4 3 187/8 233/8 1220
3 x 4 16 16 4 3 197/8 243/8 1220
4 x 6 18 18 6 4 221/4 263/4 2248
4 x 6 20 20 6 4 231/4 273/4 2248
4 x 6 22 22 6 4 241/4 283/4 2248
4 x 6 24 24 6 4 261/2 31 2248
4 x 6 26 26 6 4 271/2 32 2248
4 x 6 30 30 6 4 295/8 241/8 2248
4 x 6 32 32 6 4 305/8 351/8 2248
4 x 6 36 36 6 4 325/8 371/8 2248
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
122 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod Size Max. Rec. Approx.
Pipe Size A B* C D Load Lbs. Wt./100
1 3/8 3 15/8 41/8 600 45
11/4 3/8 33/8 113/16 41/2 600 48
11/2 3/8 35/8 115/16 43/4 600 51
2 3/8 41/16 23/16 57/16 600 58
21/2 1/2 47/8 25/8 61/4 660 123
3 1/2 51/2 215/16 67/8 700 133
31/2 1/2 6 35/16 73/8 750 146
4 5/8 67/8 33/4 87/16 750 230
5 5/8 8 45/16 99/16 750 285
6 3/4 95/8 415/16 119/16 1070 460
8 7/8 1113/16 65/16 14 1350 720
10 7/8 14 79/16 163/16 1730 1100
12 7/8 16 811/16 183/16 2400 1630
14 1 18 913/16 2011/16 3130 2150
16 11/4 201/4 111/16 23 3970 2850
18 11/4 221/2 121/8 251/4 4200 3650
20 11/4 25 131/2 261/4 4550 4650
24 11/2 285/8 1511/16 317/8 6160 6200
30 11/2 331/2 193/8 395/8 7290 12500
* Due to the inconsistent dimensions associated with cast parts, please contact the factory if the
“B” dimension is critical for installation.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 123
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod Size Max. Rec. Approx.
Pipe Size A B C D Max. Adj. Load Lbs. Wt./100
2 41/4 19/16 33/4 3/8 13/4 450 65
21/2 41/2 17/8 41/8 1/2 21/4 500 130
3 53/8 23/16 41/8 1/2 21/4 520 147
31/2 53/4 21/2 41/8 1/2 21/4 560 159
4 65/8 215/16 53/8 1/2 3 560 240
5 73/4 37/16 53/8 5/8 3 560 305
6 85/8 41/16 61/8 3/4 31/2 800 465
8 111/4 51/8 71/8 7/8 4 1010 712
10 131/2 63/8 71/8 7/8 4 1290 955
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
124 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod Size Max. Rec. Approx.
Pipe Size A B* C D Load Lbs. Wt./100
21/2 1/2 515/16 35/16 17/8 225 171
3 1/2 65/8 315/16 23/16 310 224
31/2 1/2 71/4 43/8 29/16 390 250
4 5/8 77/8 51/16 27/8 475 372
5 5/8 91/8 61/8 37/16 685 649
6 3/4 103/16 71/16 41/16 780 869
8 7/8 121/2 93/16 51/16 780 1368
10 7/8 155/16 113/8 65/16 965 1909
12 7/8 179/16 131/2 77/16 1200 3001
14 1 201/4 145/8 87/16 1200 3578
16 1 223/8 165/8 95/16 1200 4150
18 1 241/2 185/8 103/8 1400 5382
20 11/4 263/4 205/8 2611/16 1600 7317
24 11/2 319/16 245/8 1313/16 1600 12600
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 125
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Max. Rec. Approx.
Pipe Size A B C D Bolt Size Load Lbs. Wt./100
2 11/4 11/2 19/16 4 3/8 x 11/2 600 104
21/2 11/4 17/8 17/8 41/2 3/8 x 11/2 660 163
3 2 2 23/16 51/2 3/8 x 11/2 700 175
31/2 2 25/16 21/2 6 3/8 x 11/2 750 245
4 2 25/16 25/16 61/2 1/2 x 13/4 750 347
5 3 29/16 37/16 71/2 1/2 x 13/4 750 488
6 31/8 23/4 41/16 9 1/2 x 13/4 1070 613
8 33/8 31/8 51/8 125/8 5/8 x 13/4 1350 1039
10 51/4 313/16 63/8 143/4 5/8 x 2 1730 1654
12 51/2 41/8 79/16 167/8 5/8 x 2 2400 2190
14 61/2 411/16 87/16 183/4 3/4 x 2 3130 2770
16 81/4 53/8 97/16 21 3/4 x 21/2 3970 3460
18 91/4 6 109/16 231/8 3/4 x 21/2 4200 4120
20 101/4 61/2 113/4 245/8 3/4 x 21/2 4550 5510
24 121/4 77/8 137/8 293/8 7/8 x 31/2 6160 9000
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
126 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod Size Max. Rec. Approx.
Pipe Size A B* C D Load Lbs. Wt./100
1 3/8 31/8 25/16 9 600 100
11/4 3/8 37/16 21/2 9 600 101
11/2 3/8 35/8 25/8 9 600 104
2 3/8 41/16 213/16 9 600 112
21/2 1/2 47/8 31/2 10 600 236
3 1/2 51/2 313/16 10 700 246
31/2 1/2 6 43/16 10 750 259
4 1/2 67/8 47/8 11 750 451
5 5/8 8 57/16 11 750 486
6 3/4 95/8 65/16 12 1070 795
8 7/8 1113/16 715/16 13 1350 1182
10 7/8 14 93/16 13 1730 1562
12 1 16 107/16 13 2400 2312
14 1 18 1113/16 15 3130 3091
16 11/4 201/4 135/16 151/2 3970 4102
18 11/4 221/2 143/8 151/2 4200 4902
20 11/4 25 157/8 161/2 4550 7480
24 11/2 255/8 185/16 161/2 6160 8572
30 11/2 341/2 231/8 21 7290 16396
* Due to the inconsistent dimensions associated with cast parts, please contact the factory if the
“B” dimension is critical for installation.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 127
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 3/18/2002
Dimensions • Weights
Max. Rec. Approx.
Pipe Size C D E Load Lbs. Wt./100
2 53/4 81/2 11/2 390 570
21/2 53/4 81/2 13/4 390 570
3 53/4 81/2 21/8 390 570
4 53/4 101/8 23/4 950 760
5 53/4 101/8 33/8 950 760
6 53/4 101/8 37/8 950 760
8 67/8 87/8 51/8 2100 760
10 67/8 87/8 61/4 2100 1330
12 77/8 11 73/8 3075 1330
14 77/8 11 8 3075 2375
16 83/4 121/2 87/8 4980 2375
18 83/4 121/2 10 4980 3420
20 83/4 121/2 11 4980 3420
24 87/8 133/4 13 6100 4275
30 103/4 171/4 161/4 7500 8550
Dimensions • Weights
Pipe Size F G H J K M
2 - 3 6 /2
1
1 2 7/16 3 /2
1
41/8
4 - 6 8 1 23/8 9/16 43/4 41/4
8 - 10 4 1 33/4 5/8 7 5
12 - 14 53/4 1 33/4 9/16 91/4 6
16 - 20 63/4 1 45/8 3/4 101/4 61/2
22 - 24 71/2 1 43/4 13/16 111/2 63/4
26 - 30 10 1 55/8 1 143/8 8
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
128 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Max. Rec. Approx.
Pipe Size C D D Load Lbs. Wt./100
2 67/8 51/2 11/2 390 964
21/2 67/8 51/2 13/4 390 964
3 67/8 51/2 21/8 390 964
4 81/8 53/4 23/4 950 1102
5 81/8 53/4 33/8 950 1102
6 81/8 53/4 37/8 950 1102
8 105/8 63/4 51/8 2100 2261
10 105/8 63/4 61/4 2100 2261
12 13 8 73/8 3075 4066
14 13 8 8 3075 4066
16 145/8 85/8 87/8 4980 5330
18 145/8 85/8 10 4980 5330
20 145/8 85/8 11 4980 5330
24 153/4 85/8 13 6100 7230
30 191/4 101/2 161/4 7500 14225
Dimensions • Weights
L
Pipe Size E G K Min. Max.
2 - 3 5/8 31/2 41/8 3 37/8
4 - 6 5/8 43/4 43/8 33/8 41/2
8 - 10 3/4 7 5 47/8 65/8
12 - 14 7/8 91/4 6 57/8 75/8
16 - 20 1 101/4 61/2 57/8 73/4
22 - 24 1 111/2 63/4 61/8 8
26 - 30 11/4 143/8 8 71/4 101/2
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 129
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
A Bolt Max. Rec. Approx.
Min Max. Size Load Lbs. Wt./100
17/8 31/2 7/16 1290 221
Dimensions • Weights
Rod Size Max. Rec. Load Lbs. Approx.
A B C D E F G 650°F 750°F Wt./100
3/8 11/2 13/16 1/2 2 13/8 11/16 610 540 63
1/2 11/2 13/16 1/2 2 13/8 11/16 1130 1010 60
5/8 11/2 13/16 1/2 2 13/8 11/16 1810 1610 59
3/4 11/2 13/16 1/2 2 13/8 11/16 2710 2420 56
7/8 2 111/16 3/4 25/8 115/16 1 3770 3360 170
1 2 111/16 3/4 25/8 115/16 1 4960 4420 174
11/8 21/2 113/16 1 33/8 23/8 11/4 6230 5560 373
11/4 21/2 113/16 1 33/8 23/8 11/4 8000 7140 364
11/2 21/2 113/16 1 33/8 23/8 11/4 11630 10370 345
13/4 4 4 11/2 61/4 4 21/4 15700 14000 1657
2 4 4 11/2 61/4 4 21/4 20700 18460 1614
21/4 4 4 11/2 61/4 4 21/4 27200 24260 1562
21/2 4 4 11/2 61/4 4 21/4 33500 29880 1506
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
130 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod Size Max. Rec. Approx.
A B C D E Load Lbs. Wt./100
3/8 6 9/16 7/8 71/8 610 42
1/2 6 3/4 11/8 71/2 1130 65
5/8 6 15/16 13/8 77/8 1810 98
3/4 6 11/8 111/16 81/4 2270 145
7/8 6 15/16 115/16 85/8 3770 185
1 6 11/2 21/4 9 4960 260
11/8 6 19/16 25/8 91/8 6230 406
11/4 6 19/16 25/8 91/8 8000 400
11/2 6 17/8 3 93/4 11630 615
13/4 6 23/16 35/8 103/8 15690 980
2 6 21/2 43/16 11 20690 1400
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 131
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod Max. Rec. Load Lbs.**
Size Tap Pin Size For Service Temps. Approx. Wt. Each
No. Size A D N P T W Grip 650°F 750°F W/O Pin W/Pin
2 3/8 3 /16
11
1 /16
7
5/8 1/2 5/16 1 /16
1
1/2 610 540 .90 1.00
2 1/2 311/16 17/16 5/8 5/8 5/16 11/16 1/2 1130 1010 .70 .90
2 5/8 311/16 17/16 5/8 3/4 5/16 11/16 5/8 1810 1610 .70 .90
21/2 3/4 5 2 7/8 7/8 3/8 11/4 3/4 2710 2420 2.50 3.00
21/2 7/8 5 2 7/8 1 3/8 11/4 7/8 3770 3360 2.50 3.40
3 1 5 3 15/16 11/8 1/2 11/2 1 4960 4420 4.00 5.10
3 11/4 5 3 15/16 13/8 1/2 11/2 11/4 8000 7140 3.80 5.50
31/2 11/2 6 31/2 15/8 15/8 1/2 13/4 11/2 11630 10370 6.00 8.50
4 13/4 6 4 13/4 17/8 1/2 2 11/2 15700 14000 8.00 12.90
5 2 7 5 21/4 21/4 5/8 21/2 21/2 20700 18460 16.00 23.30
6 21/4 8 6 23/4 21/2 3/4 3 21/2 27200 24260 26.00 35.10
6 21/2 8 6 23/4 23/4 3/4 3 21/2 33500 29880 25.50 36.00
7 23/4 9 7 3 3 7/8 31/2 21/2 41580 37066 36.00 50.00
7 3 9 7 3 31/4 7/8 31/2 21/2 50580 45085 35.00 51.50
8 31/4* 10 8 4 31/2 11/2 4 4 60480 53906 90.00 116.00
8 31/2* 10 8 4 33/4 11/2 4 4 71280 63493 88.00 118.00
8 83/4* 10 8 4 4 11/2 4 4 82890 73855 86.00 120.00
8 4* 10 8 4 41/4 11/2 4 4 95400 85001 84.00 122.00
* Furnished with 8 UN series threads.
** Based on the allowable stresses shown in the ANSI Code for Pressure Piping.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
132 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 3/18/2002
Dimensions • Weights
Pipe Rod Size Max. Rec. Approx.
Size A B C D E F Load Lbs. Wt./100
3/4 - 2 3/8 21/16 9/16 1/2 1/2 1/2 610 20
21/2 - 31/2 1/2 25/16 11/16 5/8 1/2 5/8 1130 40
4- 5 5/8 27/16 3/4 5/8 1/2 5/8 1550 44
6 3/4 27/8 7/8 5/8 1/2 5/8 2100 65
8- 12 7/8 3 7/8 3/4 9/16 3/4 2350 78
* With minimum Safety Factor of 5 at maximum temperature of 450°F.
Dimensions • Weights
Rod Size Flange Max. Rec. Approx.
A B Width Load Lbs.* Wt./100
3/8 21/16 3" - 9" 300 20
1/2 25/16 3" - 9" 500 40
5/8 27/16 3" - 9" 700 44
3/4 27/8 3" - 9" 800 65
7/8 3 3" - 9" 1200 78
* With minimum Safety Factor of 5 at maximum temperature of 450°F.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 133
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod Size Max. Rec. Approx.
A B C Load Lbs. Wt./100
3/8 23/4 11/16 300 109
1/2 23/4 1 700 167
5/8 23/4 15/16 1000 223
Dimensions • Weights
Rod Size Max. Rec. Approx.
A B C D E F Load Lbs. Wt./100
3/8 23/4 37/8 47/8 7/16 21/8 610 53
1/2 31/8 43/4 6 9/16 25/16 1130 129
5/8 31/8 43/4 6 9/16 23/16 1810 128
3/4 311/16 61/4 73/4 11/16 29/16 2710 196
7/8 33/4 63/8 81/4 13/16 21/2 3770 282
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
134 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Rod H Max. Rec. Approx. Wt./100
Size PIN D F Short Long R T W Load Lbs. Short Long
1/2 5/8 1 11/16 11/2 3 1 1/4 2 1130 33 54
5/8 3/4 1 13/16 11/2 3 1 1/4 2 1810 32 53
3/4 7/8 11/4 15/16 11/2 3 11/4 3/8 21/2 2710 64 104
7/8 1 11/4 11/8 2 3 11/4 3/8 21/2 3770 74 101
1 11/8 11/2 11/4 2 3 11/2 1/2 3 4960 121 164
11/8 11/4 11/2 13/8 3 4 11/2 1/2 3 6230 160 203
11/4 11/2 2 15/8 3 4 2 5/8 4 8000 288 359
11/2 13/4 21/2 17/8 3 41/2 21/2 3/4 5 11630 469 629
13/4 2 21/2 21/8 3 41/2 21/2 3/4 5 15700 453 613
2 21/4 3 23/8 4 41/2 3 3/4 6 20630 718 782
21/4 21/2 3 25/8 41/2 — 3 3/4 6 23000 761 —
21/2 23/4 4 27/8 41/2 — 4 1 8 30550 1552 —
23/4 3 4 31/8 41/2 — 4 1 8 41600 1518 —
3 31/4 4 33/8 5 — 4 1 8 50500 1596 —
31/4 31/2 41/2 35/8 5 — 41/2 1 9 60500 1888 —
31/2 33/4 41/2 37/8 6 — 41/2 11/2 9 71300 3153 —
33/4 4 41/2 41/8 6 — 41/2 13/4 9 82900 3601 —
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 135
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Hole Size Approx.
Size A B C D E F Wt./100
2 15/16 53/8 75/8 11/2 7/8 13/16 306
21/2 13/16 57/8 81/8 11/2 7/8 17/16 348
3 11/2 61/2 83/4 11/2 7/8 13/4 409
31/2 13/4 7 91/4 11/2 7/8 2 449
4 2 71/2 93/4 11/2 7/8 21/4 491
5 29/16 89/16 1013/16 11/2 7/8 213/16 581
6 31/16 105/8 135/8 3 1 35/16 1818
8 44/16 125/8 155/8 3 1 45/16 2400
10 51/8 151/4 183/4 21/2 11/8 53/8 3786
12 61/8 171/4 203/4 21/2 11/8 63/8 4546
14 63/4 181/2 22 3 11/8 7 6800
16 73/4 201/2 24 3 11/8 8 7600
18 83/4 221/2 26 31/2 11/8 9 10800
20 93/4 241/2 28 31/2 11/8 10 12000
24 113/4 281/2 32 31/2 11/8 12 13900
30 143/4 341/2 38 31/2 11/8 15 16200
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
136 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Hole Size Approx.
Size A B C D E F Wt./100
2 11/8 53/8 75/8 11/2 — 7/8 230
21/2 11/8 57/8 81/8 11/2 — 7/8 246
3 11/8 61/2 83/4 11/2 — 7/8 266
31/2 11/8 7 91/4 11/2 — 7/8 281
4 11/8 71/2 93/4 11/2 — 7/8 297
5 11/8 89/16 1013/16 11/2 — 7/8 331
6 11/2 105/8 135/8 3 — 1 1131
8 11/2 125/8 155/8 3 — 1 1300
10 13/4 151/4 183/4 11/2 5 11/8 2059
12 13/4 171/4 203/4 11/2 5 11/8 2285
14 13/4 181/2 22 2 6 11/8 3046
16 13/4 201/2 24 2 6 11/8 3328
18 13/4 221/2 26 21/2 7 11/8 4343
20 13/4 241/2 28 21/2 7 11/8 4682
24 13/4 281/2 32 21/2 7 11/8 5358
30 13/4 341/2 38 21/2 7 11/8 6374
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 137
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
138 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Hole Size Max. Insul. Approx.
Size A B C D # Thickness Wt./100
3/4 85/16 413/16 4 53/4 5/8 111/16 2430
1 85/16 413/16 4 53/4 5/8 19/16 2890
11/4 85/16 413/16 5 53/4 5/8 13/8 3261
11/2 91/4 53/4 5 6 5/8 113/16 3257
2 111/4 79/16 6 65/8 7/8 23/8 4017
21/2 111/4 79/16 6 65/8 7/8 21/8 4050
3 111/4 79/16 6 65/8 7/8 13/4 4200
31/2 131/4 91/8 71/2 81/8 7/8 25/16 4483
4 131/4 91/8 71/2 81/8 7/8 21/16 4491
5 153/4 111/2 81/2 93/8 7/8 211/16 5771
6 153/4 111/2 81/2 93/8 7/8 23/16 7045
8 195/16 15 10 127/16 7/8 215/16 7495
10 213/4 173/8 11 1311/16 11/8 215/16 9045
12 237/8 193/8 12 141/4 11/8 215/16 9901
14 27 205/8 13 153/4 11/8 215/16 10614
16 29 225/8 14 171/16 11/8 215/16 12298
18 311/4 251/4 15 185/8 11/8 31/4 13393
20 335/8 271/4 16 193/8 11/8 31/4 14062
24 365/8 311/4 17 2311/16 11/8 31/4 15406
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 139
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 11/14/2001
Dimensions • Weights
Pipe Hole Size Max. Insul. Approx.
Size A B C D E F G Thickness Wt./100
3/4 85/16 413/16 4 53/4 5/8 2 4 111/16 1083
1 85/16 413/16 4 53/4 5/8 2 4 19/16 1090
11/4 85/16 413/16 5 53/4 5/8 2 4 13/8 1213
11/2 91/4 53/4 5 6 5/8 2 4 113/16 1245
2 111/4 79/16 6 65/8 7/8 2 4 23/8 1507
21/2 111/4 79/16 6 65/8 7/8 2 4 21/8 1509
3 111/4 79/16 6 65/8 7/8 2 4 13/4 1510
31/2 131/4 91/8 71/2 81/8 7/8 4 6 25/16 2443
4 131/4 91/8 71/2 81/8 7/8 4 6 21/16 2494
5 153/4 111/2 81/2 93/8 7/8 5 8 211/16 4122
6 153/4 111/2 81/2 93/8 7/8 5 8 23/16 5055
8 195/16 15 10 127/16 7/8 5 8 215/16 5414
10 213/4 173/8 11 1311/16 11/8 5 8 215/16 6673
12 237/8 193/8 12 141/4 11/8 5 8 215/16 7290
14 27 205/8 13 153/4 11/8 5 8 215/16 7818
16 29 225/8 14 171/16 11/8 5 8 215/16 9130
18 311/4 251/4 15 185/8 11/8 5 8 31/4 9924
20 335/8 271/4 16 193/8 11/8 5 8 31/4 10434
24 365/8 311/4 17 2311/16 11/8 5 8 31/4 11464
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
140 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
®
Revision 5/24/2001
a brand of
Dimensions • Weights
Pipe Hole Size Max. Insul. Approx.
Size A B C D E F G H Thickness Wt./100
3/4 65/8 43/8 55/16 31/8 5 11/2 3 5/8 15/8 400
1 81/2 61/4 55/8 31/2 61/4 11/2 3 5/8 15/8 400
11/4 81/2 61/4 55/8 31/2 61/4 11/2 3 5/8 15/8 630
11/2 81/2 61/4 55/8 31/2 61/4 11/2 3 5/8 15/8 630
2 81/2 61/4 55/8 31/2 61/4 11/2 3 5/8 15/8 630
21/2 91/2 71/4 75/8 4 63/4 11/2 3 5/8 21/8 760
3 113/4 91/2 93/4 5 73/8 11/2 3 5/8 21/8 1260
31/2 113/4 91/2 93/4 5 73/8 11/2 3 5/8 21/8 1260
4 113/4 91/2 93/4 5 73/8 11/2 3 5/8 21/8 1260
5 135/8 105/8 119/16 61/4 73/8 2 4 5/8 21/8 1260
6 155/8 125/8 139/16 71/4 8 2 4 5/8 25/8 1920
8 181/4 151/4 161/8 81/2 93/4 2 4 3/4 25/8 2860
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 141
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Actual Tube Hole Size Max. Insul. Approx.
Size O.D. A B C D E Thickness Wt./100
3/4 7/8 65/8 43/8 31/8 5 5/8 15/8 400
1 11/8 65/8 43/8 31/8 5 5/8 15/8 400
11/4 13/8 81/2 61/4 31/2 61/4 5/8 15/8 630
11/2 15/8 81/2 61/4 31/2 61/4 5/8 15/8 630
2 21/8 81/2 61/4 31/2 61/4 5/8 15/8 630
21/2 25/8 91/2 71/4 4 63/4 5/8 21/8 760
3 31/8 113/4 91/2 5 73/8 5/8 21/8 1260
31/2 35/8 113/4 91/2 5 73/8 5/8 21/8 1260
4 41/8 113/4 91/2 5 73/8 5/8 21/8 1260
5 51/8 113/4 91/2 5 73/8 5/8 21/8 1260
6 61/8 135/8 105/8 61/4 73/8 5/8 21/8 1920
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
142 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
“Overall Thickness”
Description (Inches)
1010 7/32
1025 11/32
1050 19/32
1075 27/32
10100 13/32
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 143
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 6/12/2003
Dimensions • Weights
Type 1 (2" Insulation) Max. 4" Travel
Pipe Max. Approx.
Size A B C D E L T Load* Wt./Each
1 - 4 21/2 23/4 11/2 — 3 6 1/4 6000 2
5 - 8 3 31/4 2 — 3 6 5/16 8000 3 H Dimensions
10 - 14 4 31/4 3 — 3 6 1/4 12000 3 Pipe Type Type Type
16 - 20 6 31/4 — 2 3 6 1/4 16000 5 Size 1 2 3
24 - 30 6 31/4 — 2 3 6 1/4 16000 5 1 33/8 47/8 57/8
11/4 39/16 51/16 61/16
Type 2 (3" Insulation) Max. 6" Travel 11/2 311/16 53/16 63/16
Pipe Max. Approx. 2 315/16 57/16 67/16
Size A B C D E L T Load* Wt./Each 21/2 43/16 511/16 611/16
1-4 211/16 41/4 11/2 — 4 9 3/16 6000 4 3 41/2 6 7
5-8 4 41/4 21/2 — 4 9 1/4 10000 5 31/2 43/4 61/4 71/4
10 - 14 4 41/4 3 — 4 9 1/4 12000 6 4 5 61/2 71/2
16 - 20 61/2 41/4 — 2 4 9 1/4 16000 10 5 6 7 8
24 - 30 61/2 41/4 — 2 4 9 1/4 16000 10 6 69/16 79/16 89/16
36 8 41/4 — 2 4 9 5/16 16000 13 8 79/16 89/16 99/16
10 85/8 95/8 105/8
Type 3 (4" Insulation) Max. 9" Travel 12 95/8 105/8 115/8
Pipe Max. Approx. 14 101/4 111/4 121/4
Size A B C D E L T Load* Wt./Each 16 111/4 121/4 141/4
1-4 211/16 51/4 11/2 — 6 12 3/16 6000 5 18 121/4 131/4 151/4
5-8 4 51/4 21/2 — 6 12 1/4 10000 8 20 131/4 141/4 161/4
10 - 14 4 51/4 3 — 6 12 1/4 12000 8 24 151/4 161/4 181/4
16 - 20 61/2 61/4 — 2 6 12 1/4 16000 15 30 181/4 191/4 211/4
24 - 30 61/2 61/4 — 2 6 12 1/4 16000 15 36 — 221/4 241/4
36 8 61/4 — 2 6 12 5/16 16000 21
* Based on using 2" wide PTFE slide plate at 70°F temperature
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
144 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 145
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 10/24/2001
Dimensions • Weights
Pipe Max. Max. Approx.
Size A B C D H L Travel Load # Wt./Each
6 4 31/4 21/2 — 6 6 4 7000 3
8 4 31/4 21/2 — 73/16 6 4 7000 3
10 6 33/4 — 11/2 81/4 9 7 12000 13
12 6 33/4 — 11/2 93/8 9 7 12000 13
14 7 33/4 — 11/2 93/4 9 7 12000 14
16 7 33/4 — 11/2 107/8 9 7 12000 14
18 9 33/4 — 2 119/16 9 7 16000 17
20 9 33/4 — 2 1211/16 9 7 16000 17
24 12 4 — 3 145/8 12 10 24000 34
30 13 41/4 — 3 173/4 12 10 24000 31
36** 18 41/4 — 4 197/8 12 10 24000 48
* Based on using 2" wide PTFE slide plate at 70°F temperature.
** Denotes use of stiffeners.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
146 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Max. Max. Wt. Per Approx.
Size A B C D H L Travel Load # C Pcs. Wt./100
6 6 41/2 3 — 75/16 9 7 12000 1315 1500
8 6 41/2 3 — 87/16 9 7 12000 1315 1500
10 8 41/2 4 — 91/8 9 7 16000 1291 1300
12 8 41/2 4 — 101/4 9 7 16000 1291 1300
14 10 41/2 — 2 107/16 9 7 16000 1531 1500
16 10 11/2 — 2 119/16 9 7 16000 1531 1500
18 12 45/8 — 2 121/4 9 7 16000 2154 2200
20 12 45/8 — 2 137/16 9 7 16000 2154 2200
24 14 43/4 — 3 155/16 12 10 24000 4080 4100
30 16 53/4 — 3 191/4 12 10 24000 5000 5200
36 18 61/4 — 3 225/8 12 10 24000 5950 5900
* Based on using 2" wide PTFE slide plate at 70°F temperature.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 147
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Approx.
Size A B C D E F G H T Wt./Each
1 61/2 5 — 3 2 4 2 3/8 1/8 1
2 101/2 9 — 3 2 8 2 3/8 1/8 2
3 141/2 13 — 3 2 12 2 3/8 1/8 2
4 181/2 17 91/4 4 3 16 2 7/16 3/16 5
5 221/2 21 111/4 4 3 20 2 7/16 3/16 6
6 261/2 25 131/4 4 3 24 2 7/16 3/16 7
7 7 51/2 — 6 41/2 4 3 3/8 1/8 2
8 11 91/2 — 6 41/2 8 3 3/8 1/8 3
9 15 131/2 — 6 41/2 12 3 7/16 3/16 6
10 21 191/2 101/2 6 41/2 18 3 7/16 3/16 9
11 27 251/2 131/2 6 41/2 24 3 7/16 3/16 11
12 40 38 20 6 41/2 36 3 7/16 3/16 17
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
148 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Slide Approx.
Size Width A B C D E F H J K Wt./Each
A 23/4 5 41/4 27/8 3 21/4 2 13/16 5/16 7/16 1
B 3 5 41/4 31/8 3 21/4 2 13/16 5/16 7/16 1
C 4 7 6 41/8 4 3 3 13/4 7/16 1/2 3
D 6 10 81/2 61/4 6 41/2 6 17/8 9/16 5/8 9
E 61/2 10 81/2 63/4 6 41/2 61/2 17/8 9/16 5/8 9
F 7 12 101/2 71/4 6 41/2 7 17/8 9/16 5/8 10
G 8 12 101/2 81/4 6 41/2 8 17/8 9/16 5/8 10
H 9 14 121/2 91/4 6 41/2 9 17/8 9/16 5/8 11
J 10 14 121/2 101/4 6 41/2 10 17/8 9/16 5/8 12
K 12 15 14 121/4 6 41/2 10 17/8 9/16 5/8 12
L 13 16 15 131/4 6 41/2 10 21/8 9/16 5/8 13
M 14 17 16 141/4 6 41/2 10 21/8 11/16 5/8 14
N 16 21 19 161/4 8 6 12 21/4 11/16 3/4 28
P 18 23 21 181/4 8 6 14 21/4 11/16 3/4 31
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 149
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Slide Approx.
Size Width A B C D E F H J K Wt./Each
A 21/2 5 41/4 27/8 3 21/4 2 17/16 5/16 7/16 2
B 3 5 41/4 31/8 3 21/4 2 17/16 5/16 7/16 3
C 4 7 6 41/8 4 3 3 11/2 7/16 1/2 3
D 6 10 81/2 61/4 6 41/2 6 15/8 9/16 5/8 6
E 61/2 10 81/2 63/4 6 41/2 61/2 17/8 9/16 5/8 12
F 8 12 101/2 81/4 6 41/2 7 17/8 9/16 5/8 13
G 10 14 121/2 101/4 6 41/2 10 17/8 9/16 5/8 14
H 12 15 14 121/4 6 41/2 10 17/8 9/16 5/8 16
J 14 17 16 141/4 6 41/2 10 21/8 9/16 5/8 18
K 16 21 19 161/4 8 41/2 12 21/4 11/16 3/4 21
L 18 23 21 181/4 8 41/2 14 21/4 11/16 3/4 36
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
150 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
®
Revision 5/24/2001
a brand of
Dimensions • Weights
Approx
Size A B Wt./100
1 4 3 41
2 8 7 67
3 12 10 93
4 16 14 119
5 20 18 145
6 24 22 171
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 151
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Approx.
Size L M N P Q Wt./100
2 6 41/2 35/8 1/4 41/2 200
21/2 6 5 41/8 1/4 41/2 300
3 6 51/2 45/8 1/4 41/2 300
31/2 6 6 51/8 1/4 41/2 300
4 6 61/2 55/8 1/4 41/2 400
5 6 71/2 65/8 1/4 41/2 400
6 9 9 77/8 1/2 6 1100
8 9 11 97/8 1/2 6 1400
10 9 13 117/8 1/2 6 1700
12 9 15 137/8 1/2 6 2000
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
152 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Pipe Approx.
Size L M N P Q Wt./100
2 6 43/4 37/8 1/4 41/2 200
21/2 6 5 43/8 1/4 41/2 300
3 6 57/8 5 1/4 41/2 300
31/2 6 63/8 51/2 1/4 41/2 400
4 6 615/16 61/16 1/4 41/2 400
5 6 8 71/8 1/4 41/2 500
6 9 91/2 83/8 1/2 6 1200
8 9 111/2 103/8 1/2 6 1500
10 9 135/8 121/2 1/2 6 1800
12 9 1511/16 149/16 1/2 6 2100
14 12 177/16 1513/16 5/8 8 4100
16 12 197/16 1713/16 5/8 8 4600
18 12 217/16 1913/16 5/8 8 5200
20 12 237/16 2113/16 5/8 8 5700
24 12 271/2 257/8 5/8 8 6700
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92870 • Ph: 909.737.5599 • Fax: 909.737.0330
www.tolco.com
153
™
www.tolco.com
a brand of
®
Revision 7/3/2001
*Currently unavailable in: Texas, Oklahoma, New Mexico, Arkansas and Louisiana.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
154 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Fig. 580 & Fig. 581 Fig. 582 — Short Spring Hanger*
Constant Supports Approvals — Conforms to Federal Specification
Approvals — Constant support hangers conform WW-H-171E, Type 51, 56 and 57 and Manufacturers
to Federal Specification WW-H-171E, Types 52, 58 Standardization Society SP-69, Types 51, 52 and 53..
and 59, and Manufacturers Standardization Society Note — Made to order; Consult factory for specifications.
ANSI/MSS SP-58, Type 54,55 and 56 and
*Currently unavailable in: Texas, Oklahoma, New Mexico, Arkansas and
ANSI B31 1-1980.
Louisiana.
Note — Made to order; Consult factory for
specifications.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 155
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 8/30/2002
Dimensions • Weights
*Max. Design Loads/Lbs.
Flange Thickness Along Across
Type Max. (In.) Beam Beam
1 3/4 1265 2015
2 11/4 1265 2015
Dimensions • Weights
*Max. Design Loads/Lbs.
Fits Beam Along Across
Size Range (In.) Beam Beam
1 4 - 6 1265 2015
2 6 - 8 1265 2015
3 8 - 10 1265 2015
4 10 - 12 1265 2015
5 12 - 14 1265 2015
6 14 - 16 1265 2015
7 16 - 18 1265 2015
OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330
156 CUSTOMER SERVICE • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330
CUSTOMER SERVICE • 800.786.5266 163
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 3/28/2003
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
158 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Approx.
A B C D H1 H2 Wt./100
12 9 2 1/4 Specify Specify Varies
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 159
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 8/01/2003
Dimensions • Weights
Max. Design Approx.
Pipe Size A B Load Lbs.* Wt./100
1x1 43/4 43/4 655* 103
1 x 11/4 51/16 413/16 655* 107
1 /4 x 11/4
1
53/8 51/4 655* 109
* Load will accommodate up to 4" pipe at maximum spacing.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
160 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 2/02/2005
Dimensions • Weights
Max. Design. Max. Design Load Approx.
Pipe Size A B H* Load Lbs. Lbs. w/Washer Wt./100
1 6 15/8 17/32 2015 2765 91
* Available with hole sizes to accommodate up to 3/4" fastener. Consult Factory.
OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330
CUSTOMER SERVICE • 800.786.5266 167
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 3/28/2003
Dimensions • Weights
D Hole Max. Design Approx.
Pipe Size A B C Size E F Load Lbs. Wt./100
1 2 11/2 3 9/16 25/16 2 2015 88
11/4 13/16 15/16 3 9/16 25/16 25/16 2015 99
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
162 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Hole Max. Design Approx.
Pipe Size A B C Size Load Lbs. Wt./100
1 4 31/2 11/2 9/16 2015 88
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 163
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 3/28/2003
Dimensions • Weights
Max. Design Approx.
A B H* Load Lbs. Wt./100
51/4 17/8 17/32 2765 132
* Available with hole sizes to accommodate up to 3/4" fastener. Consult factory.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
164 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Dimensions • Weights
Max. Design Approx.
A B C D Load Lbs. Wt./100
51/8 41/8 11/4 21/4 2015 88
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
165 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 8/30/2002
Dimensions • Weights
Cable Maximum Design
Diameter A B Load Lbs.
1/8" 45/16" 2" 975*
3/16" 5" 21/4" 2050*
1/4" 5" 25/8" 3150*
* Maximum load rating controlled by cable breaking strength.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
166 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
D
Order By — Figure number, cable size and hanger
ON
UE
A TI
N
RM
I
FO
T
Dimensions • Weights
IN
N
Cable Maximum Design
Diameter A B Load Lbs.
T
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 168
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 10/17/2003
Dimensions • Weights
Cable Maximum Design
Diameter A B Load Lbs.
1/8" 53/4" 21/8" 975*
3/16" 63/4" 21/2" 2050*
1/4" 63/4" 21/2" 3150*
* Maximum load rating controlled by cable breaking strength.
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
167 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 8/30/2002
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
168 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 8/01/2003
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 169
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 8/30/2002
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
170 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Reference
Material
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 171
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
172 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 173
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
174 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 175
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
176 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 177
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
178 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 179
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Beam Dimensions
American Standard American Standard
American Standard Wide Flange — W Shapes
Channels — C Shapes I Beams — S Shapes
Designation Flange Ave. Designation Flange Ave. Designation Flange Ave. Designation Flange Ave.
Depth & Wt. Width Thickness Depth & Wt. Width Thickness Depth & Wt. Width Thickness Depth & Wt. Width Thickness
"x" Lbs. "Y" "Z" "x" Lbs. "Y" "Z" "x" Lbs. "Y" "Z" "x" Lbs. "Y" "Z"
C3 x 4.1 13/8 S3 x 5.7 23/8 .250 W4 x 13 4 .375 W14 x 99 145/8 .780
C3 x 5.0 11/2 .250 S3 x 7.5 21/2 W5 x 19 5 .430 W14 x 109 145/8 .860
C3 x 6.0 15/8 S4 x 7.7 25/8 W6 x 25 51/8 .455 W14 x 120 145/8 .940
.313 W14 x 132 143/4 1.030
C4 x 5.4 15/8 S4 x 9.5 23/4 W8 x 18 51/4 .330
.313
C4 x 7.25 13/4 S5 x 10.0 3 W8 x 21 51/4 .400 W16 x 36 7 .630
.313 W16 x 40 7 .505
C5 x 6.7 13/4 .313 S5 x 14.75 31/4 W8 x 24 61/2 .400
C5 x 9.0 17/8 S6 x 12.5 33/8 W8 x 28 61/2 .465 W16 x 45 7 .565
.375 W16 x 50 71/8 .630
C6 x 8.2 17/8 S6 x 17.25 35/8 W8 x 31 8 .435
C6 x 10.5 2 .375 W8 x 35 8 .495 W16 x 57 71/8 .715
S7 x 15.3 35/8 .375 W16 x 67 101/4 .665
C6 x 13.0 21/8 S7 x 20.0 37/8 W8 x 40 81/8 .560
W8 x 48 81/8 .685 W16 x 77 101/4 .760
C7 x 9.8 21/8 S8 x 18.4 4 W16 x 89 103/8 .875
C7 x 12.25 21/4 .375 .438 W8 x 58 81/4 .810
S8 x 23.0 41/8 W16 x 100 103/8 .985
C7 x 14.75 21/4 W8 x 67 81/4 .935
S10 x 25.4 45/8 .500 W18 x 50 71/2 .570
C8 x 11.5 21/4 S10 x 35.0 5 W10 x 22 53/4 .360
W10 x 26 53/4 .440 W18 x 55 71/2 .630
C8 x 13.75 23/8 .375 S12 x 31.8 5 W18 x 60 71/2 .695
C8 x 18.75 21/2 W10 x 33 8 .435
S12 x 35.0 51/8 .563 W10 x 39 8 .530 W18 x 65 75/8 .750
C9 x 13.4 21/2 S12 x 40.8 51/4 W18 x 71 75/8 .810
C9 x 15.0 21/2 .438 .688 W10 x 45 8 .620
S12 x 50.0 51/2 W10 x 49 10 .560 W18 x 76 11 .680
C9 x 20.0 25/8 W18 x 86 111/8 .770
S15 x 42.9 51/2 .625
W10 x 54 10 .615
C10 x 15.3 25/8 S15 x 50.0 55/8 W10 x 60 101/8 .680 W18 x 97 111/8 .870
C10 x 20.0 23/4 W10 x 68 101/8 .770 W18 x 106 111/4 .940
.438 S18 x 54.7 6
C10 x 25.0 27/8 .688 W10 x 77 101/4 .870 W21 x 62 81/4 .615
C10 x 30.0 3 S18 x 70.0 61/4
W10 x 88 101/4 .990 W21 x 68 81/4 .685
C12 x 20.7 3 S20 x 66.0 61/4 .813 W21 x 73 81/4 .740
S20 x 75.0 63/8 W12 x 26 61/2 .380
C12 x 25.0 3 .500 W12 x 30 61/2 .440 W21 x 83 83/8 .835
C12 x 30.0 31/8 S20.3 x 86.0 7 .938 W21 x 93 83/8 .930
S20.3 x 96.0 71/4 W12 x 35 61/2 .520
C15 x 33.9 33/8 W12 x 40 8 .515 W21 x 101 121/4 .800
C15 x 40.0 31/2 .625 S24 x 80.0 7 W12 x 45 8 .575 W21 x 111 123/8 .875
C15 x 50.0 33/4 S24 x 90.0 71/8 .875 W12 x 50 81/8 .640 W21 x 122 123/8 .960
C18 x 42.7 4 S24 x 100.0 71/4 W12 x 53 10 .575 W24 x 76 9 .680
C18 x 45.8 4 W12 x 58 10 .640 W24 x 84 9 .770
.625 W24 x 94 91/8 .875
C18 x 51.9 41/8 W12 x 65 12 .605
C18 x 58.0 41/4 W12 x 72 12 .670 W24 x 104 123/4 .750
W12 x79 121/8 .735 W24 x 117 123/4 .850
W12 x 87 121/8 .810 W24 x 131 127/8 .960
W12 x 96 121/8 .900 W27 x 94 10 .745
W12 x 106 121/4 .990 W27 x 102 10 .830
W14 x 30 63/4 .385 W27 x 114 101/8 .930
W14 x 34 63/4 .455 W27 x 146 14 .975
W14 x 38 63/4 .515 W30 x 108 101/2 .760
W14 x 43 8 .530 W30 x 116 101/2 .850
W14 x 48 8 .595 W30 134 101/2 .930
W14 x 53 8 .660 W30 x 132 101/2 1.000
W14 x 61 10 .645 W33 x 118 111/2 .740
W14 x 68 10 .720 W33 x 130 111/2 .855
W14 x 74 101/8 .785 W33 x 141 111/2 .960
W14 x 82 101/8 .855 W36 x 135 12 .790
W14 x 90 141/2 .710 W36 x 150 12 .940
W36 x 160 12 1.020
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
180 Customer Service • 800.786.5266
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Decimals of a Foot
Inch 0" 1" 2" 3" 4" 5" 6" 7" 8" 9" 10" 11"
0 0 .0833 .1667 .2500 .3330 .4167 .5000 .5833 .6667 .7500 .8333 .9167
1/16 .0052 .0085 .1719 .2552 .3385 .4219 .5052 .5885 .6719 .7552 .8385 .9219
1/8 .0104 .0938 .1771 .2604 .3438 .4271 .5104 .5938 .6771 .7604 .8438 .9271
3/16 .0156 .0990 .1823 .2656 .3490 .4323 .5156 .5990 .6823 .7656 .8490 .9323
1/4 .0208 .1042 .1875 .2708 .3542 .4375 .5208 .6042 .6875 .7708 .8542 .9375
5/16 .0260 .1094 .1927 .2760 .3594 .4427 .5260 .6094 .6927 .7760 .8594 .9427
3/8 .0313 .1146 .1979 .2812 .3646 .4479 .5313 .6146 .6979 .7813 .8646 .9479
7/16 .0365 .1198 .2031 .2891 .3724 .4557 .5391 .6224 .7057 .7891 .8724 .9557
1/2 .0417 .1250 .2083 .2917 .3750 .4583 .5417 .6250 .7083 .7917 .8750 .9583
9/16 .0469 .1302 .2135 .2969 .3802 .4635 .5469 .6302 .7135 .7969 .8802 .9635
5/8 .0521 .1354 .2188 .3021 .3854 .4688 .5521 .6354 .7188 .8021 .8854 .9688
11/16 .0573 .1406 .2240 .3073 .3906 .4740 .5573 .6406 .7240 .8073 .8906 .9740
3/4 .0625 .1458 .2292 .3125 .3958 .4792 .5625 .6458 .7292 .8125 .8958 .9792
13/16 .0677 .1510 .2344 .3177 .4010 .4844 .5677 .6510 .7344 .8177 .9010 .9844
7/8 .0729 .1563 .2396 .3229 .4063 .4896 .5729 .6563 .7396 .8229 .9063 .9896
15/16 .0781 .1615 .2448 .3281 .4118 .4948 .5781 .6615 .7448 .8221 .9115 .9948
Decimals of an Inch
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 181
www.tolco.com
™
www.tolco.com
a brand of
®
Revision 5/24/2001
Schedule 40 & 80
Pipe Sched. Wall Wt. Per Water Weight Pipe Sched. Wall Wt. Per Water Weight
Size No. O.D. Thickness Foot per Ft./Lbs Size No. O.D. Thickness Foot per Ft. Lbs.
Nom. Nom.
Tube O.D. Wall Wt. Per Water Weight Tube O.D. Wall Wt. Per Water Weight
Size Tubing O.D. Thickness Foot per Ft./Lbs Size Tubing O.D. Thickness Foot per Ft. Lbs.
1/4 3/8 .375 .030 .126 .034 1/4 3/8 .375 .035 .145 .032
3/8 1/3 .500 .035 .198 .062 3/8 1/2 .500 .049 .269 .055
1/2 5/8 .625 .040 .285 .100 1/2 5/8 .625 .049 .344 .094
5/8 3/4 .750 .042 .362 .151 5/8 3/4 .750 .049 .418 .144
3/4 7/8 .875 .045 .455 .209 3/4 7/8 .875 .065 .641 .188
1 11/8 1.125 .050 .655 .357 1 11/8 1.125 .065 .839 .337
11/4 13/8 1.375 .055 .884 .546 11/4 13/8 1.375 .065 1.040 .527
11/2 15/8 1.625 .060 1.140 .767 11/2 15/8 1.625 .072 1.360 .743
2 21/8 2.125 .070 1.75 1.341 2 21/8 2.125 .083 2.050 1.310
21/2 25/8 2.625 .080 2.480 2.064 21/2 25/8 2.625 .095 2.920 2.000
3 31/8 3.125 .090 3.330 2.949 3 31/8 3.125 .109 4.000 2.960
31/2 35/8 3.625 .100 4.290 3.989 31/2 35/8 3.625 .120 5.120 3.900
4 41/8 4.125 .110 5.380 5.188 4 41/8 4.125 .134 6.510 5.060
5 51/8 5.125 .125 7.610 8.081 5 51/8 5.125 .160 9.670 8.000
6 61/8 6.125 .140 10.200 11.616 6 61/8 6.125 .192 13.870 11.200
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
182 Customer Service • 800.786.5266
www.tolco.com
www.tolco.com www.tolco.com
Revision 5/24/2001 Revision 6/1/2002
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 909.737.5599 • Fax: 909.737.0330 Main Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266 Customer Service • 800.786.5266 183
www.tolco.com www.tolco.com
TOLCO™ Pipe Hangers & Support Systems
Fittings
Wrot and cast copper pressure fittings • Wrot and cast copper drainage
fittings • Wrot copper PEXlink® fittings • Cast copper alloy flared fittings • Cast
copper alloy flanges • ABS and PVC DWV fittings • Schedule 40 PVC pres-
sure fittings • CPVC CTS fittings • CPVC CTS-to-metal transition fittings
• Schedule 80 PVC and CPVC systems • CPVC metric piping systems.
Chemtrol®
Supporting
Ideas
Thermoplastic pipe, valves and fittings in PVC, Corzan® CPVC, polypropylene
and PVDF Kynar® • Chem-Aire® thermoplastic compressed air piping systems
• Pneumatic and electric actuation systems.
the Flow.
that flow. ™
eNIBCO®
Supporting A suite of services designed to make customers more efficient • More cost-effective
• More informed • EDI—Electronic Data Interchange • VMI—Vendor Managed
Inventory • NIBCO.com • NIBCOpartner.com • eNIBCO will continuously develop
the Flow. ™ new products to deliver the competitive advantage.
C-TOLH-0403