Академический Документы
Профессиональный Документы
Культура Документы
Phone
PABX
FXO
Server
The server has a FXO and FXS cards. Fxs connected to a telephone and an FXO connected to the PABX.
The cable used 2 types of 1.5 km and 200m.
Step 1, When the phone is OFFHOOK, FXO also OFFHOOK. In these conditions, the end FXO was
measured and obtained 25 mA. It was good for the state Normal cable with a distance of 1.5 km and 200
OFFHOOK
Phone
PABX
1,5 Km FXS
FXO
End FXO = 25 mA
Server
OFFHOOK
m
OFFHOOK
Phone
PABX
200 m FXS
FXO
End FXO = 25 mA
Server
OFFHOOK
Step 2, the phone is closed (ONHOOK) and FXO was ONHOOK. Then end FXO measured for a distance of
1.5 km obtained was 25 mA. For cable is 200m, the results of measuring 0 mA
ONHOOK
Phone
PABX
1,5 Km FXS
FXO
End FXO = 25 mA
Server
ONHOOK
ONHOOK
Phone
PABX
200 m FXS
FXO
End FXO = 0 mA
Server
ONHOOK
conclusion :
From testing ::
OFFHOOK :
Cable 1.5 km = 25 mA ( end FXO )
Cable 200m = 25 mA ( end FXO )
ONHOOK :
Cable 1.5 km = 25 mA ( end FXO )
Cable 200m = 0 mA ( end FXO )
Because size is 25 mA current when ONHOOK , so the position will PABX still busy when called back , it
did not return to 0 .
So I ask , How can the condition of the cables can be just 1.5 miles from the conditions in the 200m cable
is 0 mA when ONHOOK so PABX closed?
What to do ? Anything there is a way to solve it ?