Академический Документы
Профессиональный Документы
Культура Документы
WATER DIVISION
M GENERAL CATALOGUE
R
RH
XRN
M MECHANICAL DIAPHRAGM METERING PUMPS
Motor UNEL-MEC:
Motor UNEL-MEC standard 3
phase, 50/60Hz. Single phase Individual gearbox reducer for each All possible combinations
and ATEX options available. pumphead: up to 10 pumpheads
Promotes standardization Now you can have pumpheads with
and enables immediate motor different S.P.M.
availability on site. Enhanced flexibility.
2 oblpumps.it oblpumps.it 3
M MECHANICAL DIAPHRAGM METERING PUMPS
MECHANICAL DIAPHRAGM METERING PUMPS
POMPE DOSATRICI A MEMBRANA MECCANICA
PP PP A AISI-316L PP PP A AISI-316L
BOILERS Water Quality Control
• Corrosion Inhibitors (Oxygen scavengers, etc) Anti-scaling
reagents.
• Conductivity control (chemistry adjustment) pH control (acids and
caustics).
• ORP (Oxidation-Reduction Potential) Anti-fouling and biological
growth control (Biocides).
CHEMICAL
FEATURES & BENEFITS • Various Additive and Reactors (Chemical Reaction Process).
Valve & Seat material options: Ceramic, Stainless Steel, Incoloy-825, Hastelloy C-276. • Drum / Tote.
Increased performance when handling high density and viscous liquids as well as highly abrasive and aggressive fluids • Injection, Mixing and much more.
while minimizing cost impact.
Extends pump life and lowers life-cycle cost.
Diaphragm Structure
MINING
OBL’s mechanical diaphragm operates similar to a plunger by delivering the swept volume of the diaphragm whilst
acting as a separating element between casing and liquid end. OBL’s unique diaphragm design allows controlled • Ore Separation: Leaching process (cyanides, sulphuric acid,
volumetric displacement and ensures a linear proportional flowrate according to stroke length setting. solvents, etc.).
• Flotation collectors (polymers, etc). Defoamers emulsifiers.
FEATURE & BENEFITS Depressants and Dispersant chemicals (Iron sulfide).
• Dust control (Dosing of wetting chemicals).
PP diaphragm back-support ring: Protection against discharge overpressure.
Reduces downtime and cleanup, “minimizing” chemical exposure.
NYLON NET
Detail of the bonding between diaphragm
and metallic support. Cross-section of the diaphragm.
4 oblpumps.it oblpumps.it 5
M MECHANICAL DIAPHRAGM METERING PUMPS
M7 25 7
M9 30 9
M 11 36 11 12
M 14 43 14 12 12
M 16 50 16
2 M 19 60 19
M 23 70 23
94
M 31 95 31 M 28 84 28
10
M 37 115 37 M 36 114 36 10 10
M 50 155 50 M 45 138 45
M 35 36 35
M 42 43 42
M 49 50 49
M 58 60 58 10 10 8
4 M 75 70 75
M 90 84 90
108 M 101 95 101
M 120 115 120 M 118 114 118
10 10
M 155 155 155 M 145 138 145 6
M 102 36 100
M 119 43 120 8 8
M 131 50 132
6 M 201 70 197 M 158 60 158
7 7 4
138 M 261 95 260 M 236 84 236
M 321 115 320 M 312 114 312
6 6
M 421 155 420 M 384 138 384
BL2.0 Ø108
BL2.0 Ø138
BL2.0 Ø165
BL2.0 Ø94
2
M 150 36 150 M 180 43 165
M 190 50 200 M 228 60 228 5
M 301 70 300 M 360 84 350 5
6
165 M 431 95 435 0
M 519 114 515 4 0,0 200,0 400,0 600,0 800,0 1000,0 1200,0 l/h
M 521 115 520
Overall dimensions
SINGLE PUMP - Manual Adjustment SINGLE PUMP - Electric Actuator Adjustment
Material of construction
VALVE SEAT AISI-316L PVC AISI-316L INCOLOY-825 PTFE MULTIPLE PUMP - Manual Adjustment
HASTELLOY
VALVE (BALL) AISI-316L PYREX AISI-316L PYREX
C-276
6 oblpumps.it oblpumps.it 7
R PLUNGER METERING PUMPS
NEW DESIGN
PTFE coated cast iron yoke:
Improved chemical resistance in
case of liquid spillage to reduce
ENHANCED FLEXIBILITY
STURDIER
maintenance cost.
Double check valves standard on
Extends pump life and lowers life-
models with flowrates up to 18 l/h,
cycle cost.
NEW DESIGN optional on flows upto 150 l/h.
Duplex unit with
Increased accuracy when operating at
manifolds:
low flow.
for flowrates up to
Wider range of applications.
600 l/h
ATEX ATEX
i ALL models comply with ATEX (2014/34/CE) i ALL models comply with ATEX (2014/34/CE)
Group II, Category 2 (zone 1/21) and Group II, Group II, Category 2 (zone 1/21) and Group II,
Category 3 (zone 2/22). Category 3 (zone 2/22).
8 oblpumps.it oblpumps.it 9
R PLUNGER METERING PUMPS
CHEMICAL
• Various Additive and Reactors (Chemical Reaction Process).
• Drum / Tote.
FEATURES & BENEFITS • Injection, Mixing and much more.
Single valve configuration only. Avoid leakages even when dosing liquids with
Very cost effective solution and economical particles in suspension.
operation. Suitable for fluid temperatures up to +40°C for all
Plunger lip seals (OBL design) available in three different seal types.
materials to meet all dosing requirements. Plunger lip seals (OBL desing) are non adjustable.
Maximum working pressure up to 10 barg. MINING
• Ore Separation: Leaching process (cyanides, sulphuric acid,
solvents, etc.).
• Flotation collectors (polymers, etc). Defoamers emulsifiers.
Depressants and Dispersant chemicals (Iron sulfide).
Sectional view • Dust control (Dosing of wetting chemicals).
10 oblpumps.it oblpumps.it 11
R PLUNGER METERING PUMPS
12
50 0,8 43 0,7
70 1,2 60 1 10
R6 / 40 / / / /
DIRECT CONNECT.
95 1,8 84 1,5 ●
1/4” BSP f
1/4” BSP f
36 2 30 1,6 10 6
10 40
50 3 43 2,5 ●
R 10 70 4 60 3,4 / / / /
95 5,5 84 4,8 10 40 10
115 7 114 7
36 5 4
43 6
50 7
60 9,5
R 16 70 11 10 40 10 10 10
84 13
95 15
0,25 KW NO TL
0,25 kW NO TL
114 18
115 18
36 15 40
DN 15 - 1/2” ANSI
43 16 2
50 20 40
3/8” BSP f
3/8” BSP f
3/8” BSP f
60 24
R 25 70 30 10 40 10 10 10
84 33
95 38
114 45
35 DN 15 - 1/2” ANSI
3/8” BSP f
115 45 30
RH-TS
R-TS
R-TL
36 20 40
RH
43 24
R
50 30 40 0
60 34
R 30 70 40
84 48
10 35 10 10 10 0,0 100,0 200,0 300,0 400,0 500,0 600,0 700,0 l/h
95 55 26
114 65
115 65 22
36 40 12
43 50
50 55 12
R 43 70 90
60 78
10 12 10 10 10 Overall dimensions
84 100
95 115 12
114 150
115 150 / SINGLE PUMP - Manual Adjustment MULTIPLE PUMP - Manual Adjustment
36 58 10 10 10 10
43 70
50 80 10 10 10 10
1/2” BSP f
1/2” BSP f
1/2” BSP f
1/2” BSP f
60 102
R 50 70 120 10 / 10 10 10
84 140
95 160 9 9 10 10
114 200
115 200 8 8 9 9
0,37 kW
0,37 kW
36 90 10 10 8 8
43 105
DN 20 - 3/4”
50 125 10 10 8 8
3/4” BSP f
R 62 60 152
ANSI
70 175 8 / 8 7 7
u 84 205
95 250 6 6 6 6
114 300
115 300 5 5 5 5
Material of construction
PUMPHEAD WITH GLAND NUT PUMPHEAD WITHOUT GLAND NUT
COMPONENTS A A-TL P P11 AC COMPONENTS PAE PCF PCV AAF AAE ACE ACV ACF
PUMP HEAD AISI-316L AISI-316L PVC PVC AISI-316L PUMP HEAD PVC PVC PVC AISI-316L AISI-316L AISI-316L AISI-316L AISI-316L
PLUNGER AISI-316L AISI-316L CERAMIC CERAMIC CERAMIC PLUNGER AISI-316L CERAMIC CERAMIC AISI-316L AISI-316L CERAMIC CERAMIC CERAMIC
PLUNGER PACKING PTFE PTFE PTFE PTFE PTFE PLUNGER PACKING EPDM FPM VULKOL. FPM EPDM EPDM VULKOL. FPM
VALVE GUIDE PP/AISI-316L AISI-316L PP PP AISI-316L VALVE GUIDE PP PP PP PP PP PP PP PP
VALVE SEAT AISI-316L AISI-316L ● CERAMIC/PVC AISI-316L AISI-316L VALVE SEAT AISI-316L PVC AISI-316L AISI-316L AISI-316L AISI-316L AISI-316L AISI-316L
VALVE (BALL) AISI-316L AISI-316L ● CERAMIC/PVC AISI-316L AISI-316L VALVE (BALL) AISI-316L PYREX AISI-316L AISI-316L AISI-316L AISI-316L AISI-316L AISI-316L
VALVE SEAL FPM FPM FPM FPM FPM VALVE SEAL FPM FPM FPM FPM FPM FPM FPM FPM
12 oblpumps.it oblpumps.it 13
R SPECIAL VERSIONS
CONNECTIONS
MAX FLOW RATE l/h
STROKES / 1
STROKES / 1
36 2 30 1,6 TYPE PLUNGER PACKING PTFE
R 10 VALVE GUIDE AISI-316L
50 3 43 2,6
VALVE SEAT AISI-316L DIAPHRAGM PTFE
36 4 30 3,3
R 16 VALVE (BALL) AISI-316L VALVE GUIDE AISI-316L
50 6 43 5,2
1/2” BSP f
36 12 30 10 0,25 0,25 VALVE SEAL FPM VALVE SEAT TUNGSTEN CARBIDE
R 25 25 4 30 4,8
50 16 43 14 kW kW R 16
36 6 43 7,2 60 70 VALVE (BALL) HARDENED STEEL
36 18 30 15 MA OM
R 30 10 50 8,5 60 10,2 VALVE SEAL FPM
50 25 43 22
3/8” BSP m
25 10 30 12
36 42 30 35 R 25 35 45
R 43 36 14 43 16,8
50 50 43 44 MA OM 35 40
50 20 60 24
36 58 30 48
R 50 3/4” BSP f PLUNGER R 30 36 20 43 24 30 35
50 80 43 70 0,37 0,37 MA OM 50 30 60 36 25 30
36 90 30 75 kW kW
R 62
50 120 43 105
OM VERSION (MAGNESIUM OXIDE DOSING): HYDRAULIC DIAPHRAGM
Combustion enhancing in thermal power plant.
HV VERSION (HIGH VISCOSITY DOSING): Designed for injecting diluted magnesium oxide in combustion fuel.
Typical application: Viscous liquids and concentrated polymer (Emulsion). The OM version was specifically engineered in 1980 by co-operating with the manufacturers of the magnesium oxide. Wetted components
- Normally threaded connections with single valves, double check valves on demand. are made of special resistant materials.
- plunger pumphead with gland nut and adjustable packing. Flow rates up to 30 l/h and working pressures of 70 barg.
- PTFE adjustable plunger packing rings with “V” profile (Chevron type) to prevent
chemical leakages.
H/MH
- Suitable for fluids with viscosity up to 55000 cps.
- Max. working pressure up to 10 bar DIATOMACEOUS EARTH DOSING
CONNECTIONS
PUMP HEAD AISI-316L PP
THREADED
MAX PRESS. bar
Technical data Material of construction PLUNGER CERAMIC CERAMIC
TYPE MAX FLOW MAX FLOW
50 Hz 60 Hz COMPONENTS TS STROKES / 1 STROKES / 1 PLUNGER PACKING VULKOLLAN VULKOLLAN
MAX RATE l/h RATE l/h
CONNECTIONS PUMP HEAD AISI-316L VALVE GUIDE PP PP
TYPE MAX FLOW MAX FLOW PRESS.
STROKES / 1 STROKES / 1 bar PLUNGER SAF-2205 ACC PPCC VALVE SEAT AISI-316L AISI-316L
RATE l/h RATE l/h
THREADED FLANGED PLUNGER PACKING PTFE+KEVLAR
70 90 60 75 VALVE (BALL) AISI-316L AISI-316L
H 43
3/4” BSP m
36 2
1/2” BSP f
43 2,4 VALVE GUIDE AISI-316L 95 115 84 100
50 2,8 VALVE SEAL FPM SILICON
R 10 60 3,4 10 PLUNGER
70 4 100 VALVE SEAT AISI-316L 70 120 60 100
A TS 84 4,8 H 50
95 5 VALVE (BALL) AISI-316L 95 160 84 140
114 6 1/2” ANSI
115 6 3/8” NPT f
600 RF VALVE SEAL FPM
50 7 43 6 100 50 Hz 60 Hz COMPONENTS PP A
R 16 70 10 60 8,5 100
CONNECTIONS
Ø DIAPH./STROKE
PUMP HEAD PP AISI-316L
THREADED
MAX PRESS. bar
A TS 95 15 84 13 85
3/4” BSP m
70 73 60 58 VALVE HOUSING PP AISI-316L
3/4” BSP f
4 73 58
- Plunger pumphead with gland nut and adjustable plunger packing. 108
10
VALVE SEAL SILICON FPM
MH MH
- Extended PTFE braid type packing reinforced with KEVLAR and intermediate ring 100
95 100
90
84 90 MECHANICAL DIAPHRAGM
- Self-centring plunger
- Working pressures up to 100 barg H/MH PUMPS (DIATOMACEOUS EARTH DOSING):
Tipical application: Oenological Filtration.
OBL is a leader in manufacturing metring pumps for filter pumps for FILTER AID WITH DIATOMACEOUS EARTH; used for wine, beer and
fruit juice filtration. The range includes plunger pumps with lip seals and mechanical diaphragm pumps.
Use for flowrates up to 160 liters per hour and working pressure up to 10 bar.
14 oblpumps.it oblpumps.it 15
RH PLUNGER METERING PUMPS
Technical data
50 Hz 60 Hz CONNECTIONS
MAX PRESS. bar
TYPE MAX FLOW MAX FLOW THR. FLANGED
STROKES / 1 STROKES / 1
RATE l/h RATE l/h
A A-TL P BSP f UNI ANSI
Motor UNEL-MEC:
63 28 50 22
Motor UNEL-MEC standard 3 phase, RH 20 86 38 75 33 10 40 /
50/60Hz. Single phase and ATEX 104 47 98 44
options available. 63 44 50 34 40
Painted cast iron Promotes standardization and RH 25 86 60 75 52 10 35 10 3/8”
casing: enables immediate motor availability 104 75 98 70 30
DN 15 1/2”
Improved corrosion on site. 63 64 50 50 32
resistance against RH 30 86 86 75 75 10 23 10
104 110 98 103 20
aggressive fumes. 63 110 50 85 17
Extends pump life RH 40 86 150 75 130 10 12 10 1/2”
and lowers life-cycle 104 200 98 185 /
cost. 63 176 50 135 10 10
RH 50 86 240 75 205 8 / 8 DN 20 3/4”
104 300 98 280 7 7
63 300 50 235 6 6
Transparent protection RH 65 86 410 75 355 5 / 5 /
covers for EC directive 104 500 98 470 4 4 DN 25 1”
safety compliance. RH 80 63 420 50 330 4
/ /
● 86 620 75 540 3,5
● 0,55kW
Material of construction
COMPONENTS A A-TL AC ACV P
PUMP HEAD AISI-316L AISI-316L AISI-316L AISI-316L PVC
PLUNGER AISI-316L AISI-316L CERAMIC CERAMIC CERAMIC
PLUNGER PACKING PTFE PTFE PTFE VULKOLLAN PTFE
VALVE GUIDE AISI-316L AISI-316L AISI-316L AISI-316L PVC
VALVE SEAT AISI-316L AISI-316L AISI-316L AISI-316L PVC
VALVE (BALL) AISI-316L AISI-316L AISI-316L AISI-316L PYREX
VALVE SEAL FPM FPM FPM FPM FPM
Overall dimensions
Spring return mechanism with SINGLE PUMP - Manual Adjustment SINGLE PUMP - Electric Actuator Adjustment
oversized bearings.
Extends pump life and lowers life-
cycle cost.
16 oblpumps.it oblpumps.it 17
XRN HYDRAULIC DIAPHRAGM METERING PUMPS
SEALLESS Plunger
Maintenance free
plunger.
Reducing cost and
time of maintenance.
Smart Hydraulic Diaphragm
Hydraulic system based on API675
process pump design.
added safety and improved
performance.
18 oblpumps.it oblpumps.it 19
XRN HYDRAULIC DIAPHRAGM METERING PUMPS
XRN 2.15
XRN 2.30
XRN 6.20
XRN 6.30
XRN 6.38
XRN 6.48
85 7,3
103 9 13 10
111 10
133 12
145 13
55 10 15 13
67 14 1
72 14 l/h
87 20 1,0 21,0 41,0 61,0 81,0 101,0 121,0
XRN 6.30 85 20 20 13
103 24 17 14,5
111 23
133 30
145 30
72 26 67 24 20 17
Overall dimensions
85 32 87 33
XRN 6.38 111 42 103 40 15 13 SINGLE PUMP - Manual Adjustment SINGLE PUMP - Electric Actuator Adjustment
145 54 133 50 23 20
170 65 174 68
72 42 67 38 10 10
30 25
85 50 87 50 10 10
XRN 6.48 111 66 103 62 8 8
145 87 133 80 8 8 35 30
170 105 174 105 8 8
Material of construction
COMPONENTS A A32 P P11 S
Sectional view
PUMP HEAD AISI-316L AISI-316L PVC PVC PVC
THREADED CONNECTIONS FLANGED CONNECTIONS
DIAPHRAGM PTFE PTFE PTFE PTFE PTFE
P PVC A AISI-316L P PVC A AISI-316L
VALVE GUIDE PP PP PP PP PTFE
20 oblpumps.it oblpumps.it 21
ELECTRIC ACTUATOR SPARE PARTS AND KOP KITS
Safe area OBL Genuine Spare Parts, keep your pump running at optimal levels
OBL Z type electric actuator, option available on all Blackline pump models M, R, XRN remotely controls OBL has built a reputation for superior reliability by supplying high-quality products carefully-designed.
the pumps flowrate via input signal. However, even the best equipment requires a minimal amount of preventative maintenance.
OBL offers KOPkits (Keep On Pumping kits) designed to guard against unnecessary downtime and assure
ELECTRIC ACTUATOR CHARACTERISTICS you the highest level of efficient and uninterrupted service from your OBL pumps.
- IP 66 standard Many pumps model you purchase has a unique KOPkit of spare parts.
- 115/230V – 1 – 50/60 Hz It contains all the parts needed to assure reliable operation.
- 4-20 mA feedback signal There may be different levels of kits based on your pump model.
- Manual emergency override
A KOPkit is a troubleshooter’s best friend.
- Anticondensation heater (on demand)
- External automatic/manual selector (on demand)
In the event of a breakdown, it will put you back in business fast!
- Flow-rate limiter (Q.max trimmer) allows to reduce the pump maximum flow-rate Preventative maintenance will insure continuous high performance of your pump.
(corresponding to 20 mA command signal) up to 50% of the nameplate rated capacity. OBL assure the ready availability of all the spare parts of the pumps.
http://oblblackline.com
- Pulses (0÷2 Hz - 0÷30 Hz)
- RS 485 communication protocol
- Profibus DP-V0
We show how easy it is to repair your pump with
detailed service videos that teach you how to
correctly maintain your OBL pump.
Follow the advice of our experienced team.
OBL DESIGN
M/MB 9-1 1-37-50
4-19-28-3 (50Hz)
6-45 (60
Hz)
KRV 17
POS 55
P21-1982
POS 5 KRV04
POS 8 KBA01
VERSION
POS 15
: PP11
P21-48
KRV04
POS 5
POS 8 KBP01
POS 15
VERSION
: PP
P21-3618
POS 14
P21-4022
POS 6
individual components:
POS 137
- Reduced downtime
POS 54
- Increases uptime
- Improves parts availability
- Extends service life
22 oblpumps.it oblpumps.it 23
SPARE PARTS AND KOP KITS
OBL has a solution whether your pump needs quick, urgent maintenance or a full service repair.
http://oblblackline.com
REPAIR IT ONCE, REPAIR IT RIGHT !
M - Maintenance Video R - Maintenance Video
Everithing in One Place ! Reduce Frequency of Repairs !
All of the parts you need to get running again. Reliable replacement parts are guaranteed to last.
M PUMPS R PUMPS
Pumphead
Maintenance video to offer a proper Maintenance video to offer a proper
WITHOUT step by step guidance procedures step by step guidance procedures to
gland nut to bring your Mechanical Diaphragm bring your Plunger pump back to as
pump back to as new state. new state.
Characteristics
M MULTIPLE
Pumphead
WITH
gland nut
24 oblpumps.it oblpumps.it 25
TYPICAL SYSTEM AND ACCESSORIES
PULSATION DAMPENER
Thanks to obl’s experience, we can provide many of the accessories to complete systems for almost all applications. It is particularly important in a dosing process when using
This page shows some examples designed to meet different customer needs. reciprocating metering pumps, many are the benefits of its
installation:
- Protects the pump from high pressure peaks (water hammer
Enhanced Pump Performance and Productivity effect) and increases lifespan of the pump and system
- Flow rate becomes continuous with a linear flow, increasing
Extended MTBF (Mean Time Between Failure) the reliability and ease of the dosing process.
- Significant reduction of vibrations transmitted along the
Protect Ancillary Equipment in Fluid Flow Path METERING PUMP discharge line
- Helps reduce noise emission of the pump
Enhance Safety and Environmental Responsibility
CALIBRATION POT
Provides a verification of the actual flow rate of your chemical dosing
pump. The calibration pot must be installed on the supply side of
the pump. It is not essential but is extremely useful when dosing
hazardous chemicals, or when a pulsation damper is absent on the
discharge line or in any situation where it is difficult to determine and
verify the pumps flow rate.
26 oblpumps.it oblpumps.it 27
Technical data are subject to modifications without prior notice
oblblackline.com
OBL S.r.l.
Via Kennedy, 12
20090 Segrate (MI) - Italy
Tel. +39.02.269191
Fax +39.02.2133893
obl.info@idexcorp.com
oblpumps.it