Академический Документы
Профессиональный Документы
Культура Документы
Abstract: In the present experience, the development of a simulation will be described, using the commercial
simulator UNISIM Desing R451 and the analysis of a natural gas compression system will be performed in one
stage (from 60 psig to 1300 psig). Subsequently, the same procedure will be carried out by adding a connection
that allows the recirculation of the recovered liquid in the second separator. Finally, the data obtained for each
case will be shown, including the hydrate formation line for the inlet and outlet streamline.
2.2.2. Desarrollo de
simulación: Esta
experiencia se realizó
en dos partes: la formación de hidratos
primera se hará según de corriente de
entrada
el diseño de la Figura
Fuente: Simulador
2. en un sistema de UNISIM Design R451
compresión de una
etapa sin reciclo de
condensados y la
Av. Túpac Amaru 210 – Rímac, Lima 25, Perú
Teléfono: 481-1070 (Anexo: 6050)
Correo electrónico: feria.proyectos@fip.uni.edu.pe
Av. Túpac
Av. Túpac
AmaruAmaru
210 210
– Rímac,
– Rímac,
LimaLima
25, Perú
25, Perú
Teléfonos:
Teléfonos:
381-3831
381-3831
| 481-1070
| 481-1070
(287)(287)
Correo
Correo
electronico:
electronico:
feria.proyectos@fip.uni.edu.pe
feria.proyectos@fip.uni.edu.pe
Figura 6. Línea de segunda simulación los datos requeridos
formación de hidratos con reflujo de para la tabla de
resultados.
Figura 8. Separador
trifásico para separar
6. REFERENCIA
S
BIBLIOGRAFI
CAS
[1] S. Mokhatab, Handbook of Natural Gas
Transmission and Processing, 1 ed.,
GULF, 2006, pp. 295-296.
[2] M. Martinez, Ingeniería de Gas,
Principios y Aplicaciones. Deshidratación
de Gas Natural., Ingenieros Consultores,
S.R.L., 2000.