Академический Документы
Профессиональный Документы
Культура Документы
Completions Tubular
Accessories
Completions Tubular Accessories
All chemical injection mandrels are made with the unique dual-check-
valve sealing system that prevents communication between the tubing
and the control lines in instances of intermittent or stopped injection.
The DCIN-II comes with standard external slots for bypassing the down-
hole cables. It has a working pressure of up to 103.42 MPa [15,000 psi] at
temperatures of up to 177 degC [350 degF] and mandrels that incorporate
the Schlumberger hydraulic dry-mate connector, an externally testable
control line connection.
Expansion and separation assemblies Sliding sleeves and tubing drains
Schlumberger also provides a wide variety of Sliding sleeves and tubing drains provide a
expansion assemblies, including the industry- means of communicating between the tubing
standard packer bore receptacle, Model C and the annulus. Schlumberger offers a wide
expansion joint, overshot expansion joints for range of sliding sleeves, with various models
easy completion string retrieval, and thermal for a variety of applications: CS-1, CS-3, AS-3,
expansion joints for steam-assisted gravity and TS-3 and the Model A tubing drain.
drainage applications, where temperatures CS-1
can rise to more than 232 degC [450 degF]. A cost-effective elastomeric sliding sleeve.
Schlumberger separation assemblies are CS-3
the most reliable in the industry and are A nonelastomeric sliding sleeve that can
backed by extensive engineering qualifica- open under a 10.34-MPa [1,500-psi] differential
tion procedures. These products provide a without damage to the seals.
way to separate the completion string above
AS-3
the packer without unsetting the packer. The
An annulus pressure–activated sliding sleeve
portfolio includes the LJ and SL on-off units,
that combines all the features of the CS-3 and
the Type A rotational-release safety joints,
has an externally shearable shroud for one-
and the industry-standard tension safety joint.
time activation.
Locks and nipples TS-3
Camco* locks and nipples have for decades A tubing pressure–activated sliding sleeve
been the industry standard. The portfolio of that combines all the features of the CS-3
nipples includes several series: A, D, DB, and and has an externally shearable shroud for
the DB-HP, which is designed specifically for one-time activation.
high-pressure applications. Locks are avail-
Model A tubing drain
able for all nipples, along with accessories for
An inline pressure–activated tubing drain
making blanking plugs, circulating plugs, and
that is commonly used in rod-pumped wells
standing valves.
to provide a means of draining tubing when
a pump or parted rod string becomes stuck.
accessories is supported by
www.slb.com/completions
*Mark of Schlumberger
Copyright © 2008 Schlumberger. All rights reserved. 08-CO-036