Академический Документы
Профессиональный Документы
Культура Документы
MPI Lifting Magnets make moving material easier without deforming or damaging the load. MPI
work holding tools are versatile, compact and easy to operate.
They replace ropes, chains, and clamps because of the ability to easily control the magnet and
the strong force. MPI Lifting Magnets are permanently magnetized so they do not need electricity
to operate. Workpieces are safely loaded and unloaded with the simple on/off lever.
Since they contain high energy neodymium magnets, they offer incredible lifting capacity. For
instance, weights range from 0 to 4,400lbs. The
strong, stainless-steel lifting eye clamps the
product from the top. This avoids deforming or
damaging the load.
Permanent Lifting Magnets raise steel plates, bars, blocks, press molds. They assist in loading
and unloading machines during the handling operation. Steel mills, scrap yards, and foundries
use Lifting Magnets as well as warehouses, loading docks, shipyards, coil and pipe distributors.
Our Lifting Magnets fit round bar, pipe, and flat plates. They have a high lift capacity but are low
weight. As a result, they provide extraordinary strength in a compact size. This also ensures
safety and speed for lifting heavy loads.
Flat lift magnets are available in six models with ratings of 330, 660, 1,320, 2,200, 3,300 and
4,400lbs. Round lift ratings are approximately 50% of the flat ratings.
For safety, the actual breakaway force is 3+ times greater than the maximum flat lift ratings. The
load limits shown above are for AISI 1020 steel.
Please refer to the lifting chart for exact capacities based on size and surface finish.
1
● Lifting Magnet :- Professional quality tool – a must for businesses with a
formal safety program, you are buying the safest technology available today
for your workforce
● Manufactured in Europe to the highest quality standards
● Only lifter in the industry with a five-year warranty on the magnetic system
● Strong welded design features compact body with only two recessed
handle screws – no load bearing screws to come loose
● 3X safety factor – every lifter is individually tested to meet load
specifications and the results are recorded by serial number
● Air Gap Test – tear-off test is conducted with an air gap that simulates real
operating conditions – true capacity
● Simple Easy Switch control switches magnet on and off easily, quickly and
safely with one hand
● Stainless steel robust lifting eye permanently welded to the body – will
never come loose
● Capacity table for easy reference right on the magnet body
● Annual lifter re-certification service available from MPI – verifies lifting
performance meets product specifications and may be used for your
company’s annual OSHA lifting safety compliance program.
How it works
Our lift magnets utilize high energy Neodymium magnets offer tremendous lifting
capacity when handling flat, round and cylindrical material. The Easy Switch system
activates the magnet On and Off simply — using just one hand with a significant time
savings! The lifting magnet’s stainless steel robust lifting eye clamps product from the
top without deforming or damaging the load.
Specifications:-
When to choose permanent MPI Lifting Magnet:
The permanent MPI Lifting Magnet magnet is widely used for handling ferromagnetic
materials in the metal industry – in workshops, on building sites, in warehouses for
semi-finished steel products, when handling steel workpieces, tools, sheets, metal
2
profiled sections, tubes, and bars.Download our Workholding Catalog to view our Lift
Magnet Workload Limits for Plates and Round
Tested Workload Workload
Ø of
W L H Weight Lifting Limit Flat Limit Round Ø min/max
eye
Capacity Material Material
Part Number
40/1
LM-0150-REN 60 2.4 93 3.7 120 4.7 10 0.4 3 6.6 450 992 150 330 65 143 2/4
00
60/2
LM-0300-REN 100 3.9 152 6.0 180 7.1 16 0.6 10 22.1 900 1984 300 661 150 330 2.4/7.8
00
65/2 2.5/10.
LM-0600-REN 120 4.7 246 9.7 180 7.1 20 0.8 21 46.3 1800 3968 600 1322 300 661
70 6
12. 100/
LM-1000-REN 146 5.8 306 236 9.3 20 0.8 40 88.2 3200 7054 1000 2204 500 1102 4/11.8
1 300
6/13.7
18. 10. 198. 1366 150/
LM-2000-REN 165 6.5 478 273 20 0.8 90 6200 2000 4409 1000 2204
8 8 4 8 350
● Important parameters
● Nominal lifting capacity for flat material: up to 4,409 lbs
● Nominal lifting capacity for round material: up to 2,204 lbsSafety factor: 3+
(EN 13155).
Source :- https://mpimagnet.com
3
FOLLOW US
https://www.facebook.com/MPIMagnet
https://twitter.com/mpimagnet
https://www.youtube.com/mpimagnet
https://www.linkedin.com/company/magnetic-products-inc