Академический Документы
Профессиональный Документы
Культура Документы
73.33%
Question 2 of 60. ¿What is the unique identifier in the serial number CN8034F9YR?
N8034
CN80
8034
F9RY #
Question 4 of 60. ¿Which RAID level provides disk mirroring and data striping
without parity?
1+10 #
6
50
60
Question 5 of 60. ¿What is the quickest way to erase all system drives, NVRAM, and
RBSU settings?
Reboot the server and then use the System Erase Utility. #
Format all drives from the running operating system, and then use the System Erase
Utility.
Reboot the server and press F8 when prompted during the startup sequence.
Press and hold the UID button for more than 15 seconds.
Question 6 of 60. ¿What is the maximum number of SCSI devices that can communicate
on a single SCSI bus at any given time?
1
2
4
8 #
Question 7 of 60. ¿What must you use to update iLO High Efficiency Mode (HEM)
settings?
iLO ROM-Based Setup Utility (RBSU)
Onboard Administrator web-based interface
Remote Insight Board Command Language (RIBCL) scripting #
iLO web-based interface
Question 8 of 60. ¿You are unable to access Virtual Media via the iLO device. What
is the most likely reason for this?
The Virtual Media requires Advanced Pack licensing. #
The Virtual Media is incorrectly configured.
The host server media drives require updating.
The Virtual Media setting in the iLO ROM must be enabled.
Question 10 of 60. ¿A server has experienced a drive failure. The server has an HP
Smart Array controller supporting the rapid rebuild technology. Which factors can
impact the actual rebuild time? (Select two.)
host I/O activity #
rebuild priority #
data type
controller firmware
RAID level
Question 11 of 60. ¿What are the three states of iLO 3 and iLO 2 High Efficiency
Mode (HEM)?
Auto / Even / Odd #
Enabled / Disabled / Halt
Auto / On / Off
Start / Stop / Auto
Question 12 of 60. ¿What is an advantage of the ProLiant Gen8 server boot process
when compared to previous generations of ProLiant servers?
UEFI simplifies the pre-OS environment at the firmware level for handling system
boot, resulting in shorter boot times. #
An unconfigured server uses PXE to boot from a network server and prepares to
receive an operating system from it, so no user intervention is required.
An unconfigured server automatically runs the ORCA utility, which configures the
array to a default setting, so no user intervention is required.
Early Video is displayed a few seconds into the boot process, enabling the
detection of problems that were previously difficult to diagnose.
Question 15 of 60. ¿Which diagnostic utility runs in the iLO of all ProLiant Gen8
and later servers?
Systems Insight Manager
OneView
Active Diagnostic System
Active Health System #
Question 16 of 60. ¿Which guideline should be observed when configuring disk drives
with ACU?
If only one drive is used, install it in the bay with the highest number.
Drives of any capacity can be mixed with no loss of efficiency.
Do not mix SAS and SATA drives in the same logical volume. #
Configure SCSI drive IDs starting with zero.
Question 17 of 60. ¿What benefits are provided by HP Smart Array controllers using
FBWC over BBWC?
writes the contents of memory to a non-volatile storage devices.
provides long term data storage onto high powered batteries
utilizes rechargeable batteries allowing them to maintain full charge even after a
power failure #
improves write operations by temporarily storing data in DRAM instead of on the
drives
Question 18 of 60. ¿Where can you find setup and installation procedures for a
ProLiant DL360. ¿p Gen8 server?
HP ProLiant Gen8 Server Troubleshooting Guide
HP ProLiant DL360. ¿p Gen8 Server User Guide #
HP Services Media Library
HP QuickSpecs
Question 19 of 60. ¿Which processor technology does the ProLiant DL385 server
support?
HP PA-RISC
Intel Xeon
AMD Opteron #
Intel Itanium
Question 20 of 60. ¿You need to set the boot controller on a ProLiant Gen8 server.
Which function key enables you to enter ORCA?
F8 #
F9
F10
F11
Question 23 of 60. ¿What does annualized failure rate (AFR) measure and what units
are used?
It measures the likelihood of encountering a failure within a 365-day period and is
expressed as a percentage. #
It measures the likelihood of encountering a failure within a 365-day period and is
expressed as a unit of time.
It measures the average expected time to failure and is expressed as a percentage.
It measures the average expected time to failure and is expressed as a unit of
time.
Question 24 of 60. ¿How many additional internal drive bays will be supported after
adding a HP SAS expander card to an HP server?
8
9
24 #
26
Question 25 of 60. ¿When enforcing Dynamic Power Capping, what is the first action
taken by the power microcontroller?
Disable CPU cores.
Shut down servers.
Lower the CPU c-state.
Lower the CPU p-state. #
Question 26 of 60. ¿When troubleshooting a ProLiant ML server, you find that there
is a gap between one of the DIMMs and its latches. After shutting down the server,
what should you do?
Replace the DIMM.
Use the DIMM seating toolkit supplied with the server to snap the latches into
place.
Press the sides of the latches together to snap them into place.
Press down on both ends of the DIMM to snap the latches into place. #
Question 28 of 60. ¿Which network protocol does iLO 4 use to provide strong
authentication and encryption of commands executed over a network?
AES
SSH-2 #
SFTP
SCP
Question 29 of 60. ¿AMD Direct Connect Architecture eliminates the need for which
system component?
front-side bus #
processor cache
Trusted Platform Module (TPM)
Trusted eXecution Technology
Question 30 of 60. ¿You need to use SSH keys to secure your iLO access. When you
create the key file, what information must it contain?
The key file must contain the username at the end. #
The key file must be associated with a domain account.
The key files are associated with a single user.
The key files have Kerberos encryption.
Question 31 of 60. ¿What are two primary benefits of HP Virtual Connect with Flex-
10 technology? (Select two.)
simplifies networks #
permits remote server management
simplifies server connections #
decreases power usage
increases processing speed
Question 32 of 60. ¿Which security features do HP iLO 2 and iLO 3 for ProLiant
provide? (Select two.)
support for X.509 CA signed certificates #
support for optional LDAP-based directory services authentication and authorization
#
256-bit cipher strength encryption
IPv6 support
Kerberos support
Question 33 of 60. ¿Which software requirement must be met before you can start
troubleshooting a ProLiant server issue using the integrated iLO?
A DHCP server must be configured to supply Domain Name Service (DNS).
NTP must be enabled and configured.
iLO Advanced Pack licenses for the ProLiant server must be installed. #
Operating System service patches must be updated to the latest versions.
Question 35 of 60. ¿You have only one port available on your network switch and you
need both iLO connectivity and server access. What must you use to facilitate this
configuration?
Shared Network Port #
Dynamic Network Sharing
Network Packet Shaping
Layer 3 network switching
Question 36 of 60. ¿Which Internet browsers are supported with iLO and Lights-out
100i? (Select two.)
Microsoft Internet Explorer #
Mozilla Firefox #
Google Chrome
Apple Safari
Opera
Question 38 of 60. ¿What are two primary functions of HP Dynamic Power Capping
technology? (Select two.)
Controls fan speed for efficient cooling. #
Controls unexpected power surges.
Continuously monitors power consumption. #
Manages HP Modular Cooling System.
Limits system power and protects circuit breakers.
Question 39 of 60. ¿What must you consider when expanding an existing array?
The operating system is unaware of the change and a reboot will be required.
If more than one logical drive exists, they will be expanded simultaneously.
#
The data must be recovered to the logical drives for data to be evenly distributed.
The additional space will automatically be added to any logical drives.
Question 41 of 60. ¿A customer wants hard drives for their new HP ProLiant ML
servers. The customer wants good price-to-performance in a small-form factor. The
servers are used for non-mission critical tasks. What type of drive would meet this
customer’s requirements?
ATA
SATA #
SCSI
SAS
Question 47 of 60. ¿At what percentage of the maximum power output of the primary
supplies does High Efficiency Mode (HEM) take the secondary supplies out of step-
down mode?
60% #
70%
80%
90%
Question 48 of 60. ¿What provides a repository for online information, tools, and
help for HP business products?
HP Support Center
Worldwide Onsite Workbench
Services Media Library #
Services Access Workbench
Question 50 of 60. ¿Match each ProLiant server family with its description. For
each item, select your response from the drop-down list. Do not respond to this
question if you do not know the answer to it.
ML single- and dual-processor rack mount an tower servers
DL single- and multi-processor rack mount servers
SL built for the most demanding hyperscale
BL servers share power,management, connect
Moonshot supports cartridge form-factor servers
Question 51 of 60. ¿What are two functions of the Remote Insight Board Command
Language (RIBCL)? (Select two.)
enables you to write scripts to manage accounts #
updates the iLO firmware
allows scripted installation of Lights-Out 100 devices via a scripting toolkit
#
allows terminal services pass-thru to interact with iLO
sends alarms or specified conditions to specific server on the network
Question 52 of 60. ¿Which two processes must be disabled in order to use the
Windows <Windbg> kernel debugger from a laptop to troubleshoot issues on a host
server? (Select two.)
EMS #
BIOS Serial Console #
Server auto restart
Terminal Services pass-through
Security Override switch
Question 54 of 60. ¿Which resource is intended for call center staff and HP
Customer Support personnel and provides access to a set of documents about a
particular product family or series?
HP Support Center
Worldwide Onsite Workbench #
Services Media Library
Services Access Workbench
Question 55 of 60. ¿You need to be able to integrate iLO into your Microsoft Active
Directory environment. Which iLO management feature do you need?
Advanced Pack. #
Enterprise Edition
Standard Edition
Security Encryption
Question 55 of 60. ¿Which user privilege enables you to update the firmware of an
iLO 3 device remotely?
Configure iLO3 #
Global Security Settings
Login Secutity
Question 58 of 60. ¿How does Kerberos provide strong network authentication for iLO
3?
two-factor authentication security #
256-bit encryption
Active Directory integration
VeriSign Certificate installation
Question 59 of 60. ¿Match each technology feature of the Intel Xeon 5500 with its
associated benefit.
Turbo Mode Provides additional -processing boost dur
Hyper-Threading Tech-nology Enhances performance- and energy proficie ncy.
QuickPath Architecture Maximizes data transfer between the proc-