Академический Документы
Профессиональный Документы
Культура Документы
Polypropylene B 16" Lid and ring with blue snap-in vent 200 63485 12 (/sea
(/products/valves-
- 16" Lid and ring with 3" center thread 63868 12 distr
couplers-
sear
accessories/polypropylene- - 16" Ring only 60012 -
fittings)
- 16" Lid, ventless with ring 60367 10
Flange Ball Valves &
C 16" Lid, ventless 60365 -
Fittings
(/products/valves- - 4" Lid (air vent assembly for 16" lid, 60038 and 60011) 60019 -
Lids (/products/valves- F 5" Lid with ball check air vent (for tanks manufactured prior to 2/1/00) 60322 72
couplers-
G 5” Lid with ball check air vent, with gasket 63484 48
accessories/lids)
- 5" lid with 2" FPT (does not include vent cap) 63264 45
Repair Kit for Tanks
(/products/valves- - 5" Lid, non-vented, hinged, (for 52 & 68 gallon flat bottom & 110 low profile) 63673 25
couplers- - EPDM gasket for 5" lids 60322, 63264 or 63484 60366 -
accessories/tank-
- 18" lanyard for 8" lid and 16" non-hinged lid (tethers lid to tank) 62531 -
repair-kit)
- Ethafoam gasket for 16" non-hinged lid 62941 -
Strainers
(/products/valves- - Stainless steel screw for 8" and 16" rings 60081 -
couplers-
- Strainer basket for 16" fill-opening (7" depth) 67374 -
accessories/strainers)
* There is no connection point on this lid for a lanyard.
Vent Caps
(/products/valves-
couplers-
accessories/vent-caps)
Hinged Lids
Other
Technical Data, Fitting The hinged lid is manufactured from a co-polymer material for strength,
(/products/valves- durability and excellent chemical resistance. Our unique locking tab
couplers-
allows you to easily slip a padlock through it and secure your lid from
accessories/tank- theft or spills. The lid is interchangeable with a standard 22" or 16" lid
fitting) and ring assembly if you choose to replace your existing lid.
Technical Data, Bolted
Fitting Installation Specific features of the lid:
(/products/valves-
couplers- Easy open/close - opens a full 180 degrees
accessories/bolted-ftg- Comes complete with a baffle vent assembly which allows for adequate venting when bottom filling your
installation) tank
Unique locking tab
Technical Data,
All parts of lid may be ordered as repair parts
Bulkhead Fitting
Installation Hinged Lids
(/products/valves-
Description Vent Part Number Std
couplers- Capacity Pkg
accessories/bulkhead- (GPM)
fittings-installation)
22" Hinged lid with ring & vent 250 63874 8
Frequently Asked
22" Hinged ventless lid, with ring 64190 9
Questions
(/products/valves- 16" Hinged lid with ring & vent 100 62532 6
couplers-
16" Hinged lid with vent assembly, without ring 100 62826 6
accessories/frequently-
asked-questions) 16" Hinged ventless lid, with ring 63390 6
Part dimensions may vary and are subject to change without notice.
(/_site_components/uploads/pdfs/catalogs/WATERTANKFLYER0412.PDF)
Valves, Couplers, Fittings & Lids Catalog
© 2019 Norwesco, Inc. All Rights(/_site_components/uploads/pdfs/catalogs/VC%20Catalog%202015.pdf)
Reserved. Minnesota Web Design (http://www.wafisherinteractive.com) by W.A. Fisher Co.
California Supply Chains Act
(/_site_components/uploads/pdfs/California-
Supply-Chains-Act.pdf)