Академический Документы
Профессиональный Документы
Культура Документы
22. Proper inspection methods and data analysis tools are critical for
a) RBI
b) RCM
c) QRA
23. Risk management through inspection may have little or no effect under the
following circumstances
a) Remaining life of the equipment is less
b) Type of deterioration mechanism is unknown.
c) A & B
24. Cost effective Risk mitigation strategy can be provided for each item
through
a) Inspection
b) Failure analysis
c) Consequence analysis
25. Inspection strategy should be designed in conjunction with other mitigation
plans for all equipment will have resultant
a) Risk that are acceptable
b) Risk that are not acceptable.
c) All the above.
Risk Based Inspection Question Bank
26. For localized corrosion which inspection method is preferred than others.
a) Radiography
b) UT thickness measurement
c) MT & PT
d) All the above.
27. Purposed of inspection tools in RBI such as “ what of” tool to determine
when, hat and how is
a) To achieve the acceptable risk level
b) For all general purpose.
c) To consult the Equipment Engineer/Owner
28. Increasing the frequency of inspection may serve better define, identify or
monitor the
a) Increase, decrease
b) Decrease, increase
c) None of the above.
Risk Based Inspection Question Bank
34. Evaluating flaws for fitness for service assessment may be performed to
determine of the equipment may continue to be safely operated by
a) API 571
b) API 579
c) Owners experience.
d) All the above
35. When equipment is over designed for the process conditions re-rating the
equipment may result in a reduction of the
a) Probability of failure
b) Life time of the plant
c) Reducing the expenditure of the plant.
d) None of the above.
36. RBI study is _________
a) Team approach
b) Management approach.
c) Individual approach
d) None of the above.
37. Responsibility for gathering data on the condition and history of the
equipment in the RBI study
a) Equipment Inspector
b) Inspection specialist
c) RBI Engineer
d) A & B
38. Responsibility for assessing the types of deterioration mechanism and their
applicability
a) Corrosion specialist
b) Inspection engineer
c) Planning engineer
39. Responsibility for assessing the provision of process conditions
information-
a) Corrosion specialist
b) Inspection engineer
c) Process engineer
40. Responsible for providing the resources and follow up the system to
implement the risk mitigation decision.
a) Corrosion specialist
b) Management.
c) Planning engineer
41. EV and safety personnel also responsible for assessing and recommending
ways to mitigate
a) Probability of failure
b) Consequence of failure
c) Both a and b
42. RBI is dynamic tool that can provide current and projected________
a) Only can provide Past risk calculations
b) Future risk evaluations
c) Can not be managed with this.
Risk Based Inspection Question Bank
43. Changes in process conditions and hardware changes such as equipment
modifications or replacement frequently can significantly alter the risks.
This situation dictates the need for a
a) Re-assessment
b) No assessment.
c) Depends on the local rules.
44. When to conduct RBI reassessment.
a) After a significant changes
b) After a set time period
c) After implementation of risk mitigation strategies.
d) Before and after maintenance turnarounds.
e) All the above.