Академический Документы
Профессиональный Документы
Культура Документы
AV-Series
TABLE OF CONTENTS
3 Introduction, Certifications & Listings
4 Features & Benefits
5 Options & Accessories
6 Direct Drive Dimensional & Performance Data
18 Belt Drive Dimensional & Performance Data
30 Engineering Specifications
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
INTRODUCTION
YORK® by Johnson Controls AV Series (AVD and AVB)
product line is the perfect choice when high volume, compact
size, superior quality and long lasting fans are needed. These
AMCA licensed products are among the most efficient and
quietest fans. YORK® by Johnson Controls direct drive
Vaneaxial fans use industry-standard foot mounted motors,
while most competitor’s motors require special shafts and “C”
face mounting. That fact makes our products some of the best
on the market. In addition, if there is ever a need to replace
the motor, these standard motors are readily available and
less expensive. Of course, all YORK® by Johnson Controls
fans are balanced to an industry-leading level. Simply stated,
YORKS's Vaneaxial products lead the industry in every
category.
• Sizes 012 through 060
• Volumes exceeding 120,000 CFM
• Static pressure to 7" w.g. Belt Drive Unit with Optional Motor Cover
• Operational tip speeds to 22,000 FPM
• Power requirements under 150 HP
• Mechanical efficiences exceeding 85%
• Each unit dynamically balanced and factory tested prior to
shipment
• Motor frame sizes available to 405T
3
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
The outlet cone expands the casing to fit the usual duct size
Inlet/Outlet Cone Motor Cover
and converts the excess velocity to useful pressure.
Disconnect Switch
Motor Cover
NEMA 1, 3R, 4X and 7/9 disconnect switches are offered.
All disconnect switches are available mounted and unwired, Motor covers, which are used for all weather protection,
mounted and wired (except NEMA 7/9), or shipped loose. enclose the motor, motor sheave and belts.
Access Door
Access doors are mounted on a fan to provide access to the
fan interior for maintenance inspection.
Belt Guard
Variable Inlet Vane Inlet/Outlet Guard
Belt guard with 1/2" expanded metal safety guard enclosing
motor sheave and belts. A belt guard is not needed when a
motor cover is ordered. Inlet/Outlet Guards
Guards are to be used with an open inlet or outlet. Inlet/
outlet guards repel foreign matter and provide safety.
Inlet/Outlet Screens
Screens are 1/2" expanded metal welded to rings. Inlet/
outlet screens can be bolted between the fan and inlet bell
or duct without leakage.
Belt Guard
5
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
N N
2.00
(OPTIONAL)
JUNCTION BOX
‘A’ ‘C’
I.D. O.D.
‘B’
B.C.
(OPTIONAL) BASE
(OPTIONAL) VERTICAL E MOUNTING LEGS (OPTIONAL) ACCESS DOOR ‘J’ GAGE
MOUNTING LEGS INLET D
OR DISCHARGE END 0.563 X 1.00
(4 EQ. SP. W/ 0.563 X 1.00 SLOTS) LONG SLOTS (4)
AIRFLOW
(OPTIONAL)
HORIZONTAL
CEILING CLIPS
P P (OPTIONAL)
HORIZONTAL
CEILING CLIPS
VANE
SECTION K K
M
Approximate fan weights are less motor and accessories. Propeller is eight-bladed cast aluminum. Dimensions should not be used for construction.
Certified drawings are available upon request. Contact factory for details on UL Smoke Control applications.
6
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
G
G CC
‘G’
MAX. 2.00
FF D
D
EE
DISCHARGE View
Discharge VIEW
‘A’ ‘C’ (SEE NOTES)
I.D. O.D. (see notes)
‘B’
B.C.
F
BELT GUARD (OPTIONAL) EXTENDED
LUBE LINES
(OPTIONAL) HORIZONTAL
CEILING BRACKET (D AND F)
E & BASE MOUNTING LEGS (A,B, AND H)
(OPTIONAL) VERTICAL ‘J’ GAGE
MOUNTING LEGS INLET D
OR DISCHARGE END 0.563 X 1.00
(4 EQ.SP. W/0.563 X 1.00 SLOTS) LONG SLOTS (4)
HORIZONTAL
AIRFLOW
CEILING CLIPS
(FOR MOTOR
POSITIONS
A AND E ONLY)
P HORIZONTAL
CEILING CLIPS
(FOR MOTOR
POSITIONS
A AND E ONLY)
VANE
SECTION M K K
Approximate fan weights are less motor, drive and accessories. Propeller is eight-bladed cast aluminum. Base mounting legs are used for motor
positions A, B and H. Horizontal ceiling brackets are used for motor positions D and F. Horizontal ceiling clips are used for motor positions A and E. For
horizontal ceiling motor positions C and G, see page. Dimensions should not be used for construction. Certified drawings are available upon request.
7
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
A A B B B B A A
D D D D
AA
H
H BB
G
G CC
FF D
D
EE
DISCHARGE View
Discharge VIEW
M (SEE NOTES)
(see notes)
L
Approximate fan weights are less motor, drive and accessories. Propeller is eight-bladed cast aluminum. Available only in motor positions C and G.
Dimensions should not be used for construction. Certified drawings are available upon request.
8
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
9
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
10
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
11
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
12
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
13
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
14
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
15
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
16
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
17
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
18
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
19
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
20
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
21
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
22
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
23
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
24
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
25
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
26
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
27
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the
airstream. Power rating (BHP) does not include drive losses.
28
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
ENGINEERING SPECIFICATIONS
29
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
ENGINEERING SPECIFICATIONS
CONFIGURATION
Cone
I = Inlet 1.1 Fans shall be tested and rated in accordance with AMCA methods and
U = Outlet standards.
B = Both 1.2 The fans shall be licensed to bear the AMCA Seal for air. The ratings shown
0 = None in the product catalog must be based on
X = Special tests and procedures performed in accordance with AMCA publication 211
and shall comply with the requirements
Special Construction of the AMCA Certified Ratings Program.
F = Full Access
1.3 Fans shall conform to AMCA 99 Standards.
S = Swingout
0 = None
X = Special
DIRECT DRIVE
Weather Cover
2.1 The fan shall be of an axial flow vaneaxial type configuration with a bolt-on
Y = Yes straightening vane section.
N = No
2.2 The fan shall be direct drive with the propeller mounted on the motor shaft
Disconnect Switch by means of a taper lock bushing.
"See selection software" 2.3 The fan casing shall be of all welded construction with a flanged inlet and
Companion Flange outlet, and shall be constructed completely of carbon steel, stainless steel
0 = None
(type 316 or 304) or aluminum as indicated on fan schedule.
I = Inlet 2.4 A bolt-on straightening vane section shall be mounted on the discharge end
B = Both of the fan housing.
U = Outlet 2.5 The propeller shall be constructed of 319F cast aluminum material with the
cast blades welded to the cast hub per AWS welding standards. The hub is
Screen designed to incorporate a taper lock bushing and keyed to the motor shaft.
I = Inlet 2.6 The fan shall be coated with enamel as standard or optional other available
U = Outlet coating as made available by coating suppliers and as indicated on the fan
B = Both schedule.
0 = None 3.0 The motor shall be of a typical NEMA-T frame type and standard in nature
X = Special with the motor industry availability. The electric motor shall be as indicated
on the fan schedule and is available in any enclosure as made available
Inlet Vane from the motor vendors.
V = Variable 3.1 The motor leads shall be extended through the fan casing for accessibility.
0 = None 3.2 The fan shall be factory dynamically balanced at operating speed per AMCA
204 Grade BV-3/ ANSI S2.19 G 6.3 and the results recorded on a label
Isolator placed on the fan assembly.
R = Rubber in Shear
S = Spring
X = Special BELT DRIVE
0 = None 2.1 The fan shall be of an axial flow vaneaxial type configuration with a bolt-on
straightening vane section.
Shaft Seal 2.2 The fan shall be belt drive, sized for 1.5 service factor. Motor is mounted
Y = Yes externally on the fan casing and not exposed to the air stream.
N = No
2.3 The fan casing shall be of all welded construction with a flanged inlet and
outlet, and shall be constructed completely of carbon steel, stainless steel
(type 316 or 304) or aluminum as indicated on fan schedule.
2.3.1 The fan shall have an inner tube section, fully welded protecting the shaft,
bearings and drive components from direct air stream exposure.
2.3.2 The inner tube assembly shall have removable end covers to allow for
access to the bearing and drive assembly.
2.4 The fan shaft shall be steel, ground for precision fit to bearings and keyed
for driving the impeller and drive sheave.
2.5 Fan bearings shall be cast iron housing, self-aligning, re-lubricatable
30
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
ENGINEERING SPECIFICATIONS
bearings with grease lines extended to the exterior of the casing. A.F.B.M.A.
Bearing L10 life of 40,000 hours.
2.6 The propeller shall be constructed of 319F cast aluminum material with the
cast blades welded to the cast hub per AWS welding standards. The hub is
designed to incorporate a taper lock bushing and keyed to the fan shaft.
2.7 The motor mounting base is configured to allow for various frame sizes and
designed to allow for belt tensioning.
2.8 The fan shall be coated with enamel as standard or optional other available
coating as made available by coating suppliers and as indicated on the fan
schedule.
2.9 The fan shall be of AMCA spark resistant construction when required and as
indicated on the fan schedule as AMCA “A”, “B” or “C” as defined by AMCA
Standard 99.
3.0 The motor shall be of a typical NEMA-T frame type and standard in nature
with the motor industry availability. The electric motor shall be as indicated
on the fan schedule.
3.1 The fan shall be factory dynamically balanced at operating speed per AMCA
204 Grade BV-3/ ANSI S2. G 6.3 and the results recorded on a label placed
on the fan assembly.
31
YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES
NOTES
32
NOTES
Printed on recycled paper.
Johnson Controls, the Johnson Controls logo, YORK® and Heresite® are trademarks of Johnson Controls, Inc.,
or its affiliates, in the United States of American and/or other countries.
©2017 Johnson Controls, Inc., P.O. Box 423, Milwaukee, WI 53201 Printed in USA PUBL-7630/7631 AV March 2017
www.johnsoncontrols.com