Академический Документы
Профессиональный Документы
Культура Документы
Colours incorporated are oxide pigments, thereby fully Whilst first neat coat is still tacky, sprinkle Fosroc Anti-Slip
resistant to ultra violet light with no deterioration even in Grain No. 2 on top of it and allow to dry.
tropical conditions. After the first neat coat had dried, apply a second neat
2
Nitoproof RS is also very useful for complete coat of Nitoproof RS at spread rate of 3 m /litre and allow
waterproofing with decorative finish on corroded to dry.
corrugated metal sheets. The priming coat shall be extended at least 240 mm up to
Technical Support all parapet walls. Whilst first neat coat is still tacky, embed
Fosroc Scrim 2250 on top of it and allow to dry.
Fosroc offers a comprehensive range of high performance
high quality, construction products. In addition to a wide To enhance durability and overall appearance, an
range of quality products, Fosroc offers a technical additional third neat coat of Nitoproof RS at spread of 3
2
support package to specifiers and contractors which m /litre is highly recommended.
includes assistance with product selection and technical
Page 1
Nitoproof RS
(Formerly known as Nitoproof RS200)
Once Nitoproof RS has hardened it is then immune to Fosroc also offers various types of waterproofing systems,
weathering and dampness. First coat may be diluted slightly which include self-adhesive and torched-on membranes,
with water to ease the first application. This also applies if cementitious coatings liquid applied coatings and rubberised
Nitoproof RS thickens on standing. bituminous emulsions etc. Contact your local Fosroc
representative for further details.
Nitoproof RS is very effective when 'sandwiched' with fibre
glass to repair leaky gutters, down spouts, etc. to bridge
cracks, corrosion etc. providing the damage is not too
extensive. Consult Fosroc technical department for specific
advice.
Estimating
Supply
Nitoproof RS : 20 litre pail
Standard Colours: Pure white and Stucco Grey
Coverage
2
Nitoproof RS 3.0m /litre per coat
Precautions
Hot Climates
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the
Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that any advice,
recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct or continuous control
over where or how its products are applied, accept any liability either directly or indirectly arising from the use of its products, whether or
not in accordance with any advice, specification, recommendation of information given by it.
Fosroc Vietnam Limited
Factory & Head office telephone: fax:
Unit 1, Block 18, Ninh Logistics Park +84 (0) 241 3765 971/2 +84 (0) 241 3765 973
No. 1 Street 6
VSIP Bac Ninh Industrial Park
Fosroc Vietnam Limited Investment Certificate 212 043000 519, Issued on 18.04.2013; 1st revision 27.02.2014
Phu Chan Commune Tu Son Town
Bac Ninh Province Vietnam
www.fosroc.com Page 2