Академический Документы
Профессиональный Документы
Культура Документы
Dt. of Sample Received 11/16/2019 Name of Test Mix Design of M10 Grade concrete
l)Maximum cement content 450 kg/cum (As per IS456:2000 Clause no.8.2.4.2)
A -2 SOURCE OF MATERIALS
1 of 6
SUMMARY OF PQC-01
Test Method
IS 2386 P-1
Remarks
IS 383:2016
-
-
-
-
-
Remarks
IS 383 2016
-
-
-
Remarks
IS 383 2016
-
-
-
Test Method
IS 4031 P-4
IS 4031 P-5
IS 4031 P-5
IS 4031 P-11
IS 4031 P-6
IS 4031 P-2
Remarks
IS 383 2016
IS 3812 P-1
2 of 6
Calculation of Trial mix no.1
= 0.68
Adopted Water cement ratio
220Kgs/Cum
Cementitious content = 149.6/0.68 =
= - Kgs/Cum
As Per IS 456:2000 minimum cement content
Please check
3 of 6
A-07MIX CALCULATIONS
=(165/3.159/1000)
=0.0522 Cum
=(55/2.205/1000)
=0.0249 Cum
=(149.6/1/1000)
=0.150 cum
= 0.0009cum
= 0.772cum
=(0.772x0.55x2.91x1000)
=1236 kgs
=(0.772x0x2.889x1000)
=0 kgs
=(0.772x0.18x2.679x1000)
=372 kgs
=(0.772x0.27x2.777x1000)
=579 kgs
4 of 6
Similar Calculation are made for different trial mixes as trial mix no. 1
Trials Mix
materials Trial no.1 Trial no.2 Trial no.3 Trial no.4 Trial no.5
Fly ash 55 66 - -
Aggregate10mm 0 0 - -
Slump
initial 175 180
12/2/2019 12/2/2019
Testing dates
12/23/2019 12/23/2019
Compressive strength
7 days 11.21 9.98
28 days
5 of 6
** Water Cementitious(Cement+Fly ash)Ratio
A-09PROPOSED MIX PROPORTIONS WITH W
In case of dry condition of aggregate, the ex
Ingredients SSD W
Cementitious
Fly Ash
River sand
Crushed sand
Coarse aggre.(20mm)
Water
Admixture
Density
Note: - Aggregates should be used in saturated
of mixing water, allowance shall be made for th
On the other hand, if the aggregates are dry, the
the moisture likely to be absorbed by the aggreg
aggregates. The surface water and percent wate
A -10 Notes :-
Prepared By
165.0 165
55.0 55
372.0 368
579.0 564
1235.6 1222
0.0 0
149.6 182
1.10 1.10
2557 2557
aturated surface dry condition. If otherwise, when computin
de for the free (surface) moisture contributed by the fine an
e dry, the amount of mixing water should be increased by a
e aggregates. necessary adjustments are also required to b
ent water absorption of aggregates shall be determined to I
55 0.33 0.33
0 0.00 0.00
557
n computing the requirement
the fine and coarse aggregates.
reased by an amount equal to
equired to be made in mass of
ermined to IS: 2386.
Verify by
Quality Head
6 of 6
& check 7 &
brand.
for site
mix.
g dosage
6 of 6