Академический Документы
Профессиональный Документы
Культура Документы
The Liebherr axial piston double pump DPVD series is devel- Valid for:
oped for the open circuit in swash plate design. DPVD 108 – 108
DPVD 165 – 165
These variable displacement pumps are available in nominal
sizes from 108 – 108 to 165 – 165. Features:
Series D
The nominal pressure of the units is 400 bar and the maximum Open circuit
pressure is 450 bar absolute.
Regulator types:
The model is available as a double pump with a back to back Load Sensing with pressure cut-off
cation. Connecting the hydraulic lines is greatly simplified by Volume electric with pressure cut-off
a common suction port.
Pressure range:
The inverse drive with a swivel angle of 22° is very efficient Nominal pressure pHDN = 400 bar
and has a very high power density. Maximum pressure pHDmax = 450 bar
B
B
DPVD
variable displacement, open circuit, nominal pressure 400 bar, maximum pressure 450 bar (all data for each rotary group)
Nominal size 108 165
Displacement Vg max [cm3] 107.7 167.8
Max. speed at Vg max, nmax [rpm] 2,200 2,100
Volumetric flow at nmax, qv max [l / min] 237 352
Drive power Δp = 400 bar, Pmax [kW] 158 235
Drive torque Δp = 400 bar, Tmax [Nm] 686 1,068
Available controls EL-DA, EL-LS
Technical Data
Product dimensions (mm)* 108 165
Splined shaft profile DIN 5480 Tol. 9g W40 x 2 x 18 W45 x 2 x 21
Centering diameter A 200 511.18
Screw connection pitch B 250 530.2
Fastening bores C 17 11
Splined shaft length D 66 54.2
Connection length, SAE flanges (suction and pressure) E 238 303.8
Shaft collar / mounting flange F 476 670.1
Pressure ports SAE J518 (6,000 psi) 1" 1¼"
Suction port SAE J518 (500 psi) 3" 4"
Oil leakage port ISO 9974-1 M33 x 2 M26 x 1,5
* Dimensions may vary according to configuration and additional equipment (installation drawing on request).
Control / regulation
Other control function combinations available on request.
Electric proportional Pressure control or
adjustment pressure cut-off Load Sensing
I pB pB
Pump type
Double / Pump / Variable displacement / Series-D DPVD
Circuit type
Open O
Design
1
Shaft end
Splined shaft DIN 5480 • • 1
Splined shaft ANSI B92.1a 2
Connections
ISO 6162-2 / SAE J518-2, high-pressure port 6,000 PSI • • A
High-pressure port: SAE (3,000 PSI) B
Attachments
No attachment • • O
With impeller I
Sensor technology
Without • • 0
With swash plate angle sensor W
With pressure sensor P
With speed sensor D
• Available
On request
- Not available
Liebherr Components
Gas engines Diesel engines Fuel injection systems Axial piston hydraulics Hydraulic cylinders
Human-machine interfaces Control electronics and Power electronics Control cabinets Software
and gateways sensor technology
From A to Z – the components division of the Liebherr Group Components AG and the regional sales and distribution
offers a broad range of solutions in the area of mechanical, branches.
hydraulic, electric and electronic drive system and control
technology. The efficient components and systems are pro- Liebherr is your partner for joint success: from the product