Академический Документы
Профессиональный Документы
Культура Документы
179kW/2200rpm Cummins
Engine 1set
National
Emission standard
Ⅱ-phase
Hydraulic
pump 1 set America
Pump
Sunny/other
Rotation motor 1 pc
brand
Main Rig
Hytek/Sunn
Push & pull motor 2 set
Hydraulic y/others
Motor
Korea
walk motor 2 set Desung/Mia
ouifu/Others
Reducer
Leike/Zhon
Mud Pump 450L/min 1 set
gdi/elephant
Self-made/
Rain shed 1 set
Purchase
NC31(male)—D80 Self-made/
Sub saver 2 pcs
(female) Purchase
Self-made/
Guide bit Ф83 D80 (portable) 1 set
Purchase
Standard Self-made/
Swivel 40T 1 set
tools Purchase
Male-female Self-made/
D80 1pc
Connector Purchase
For Better City!
Barrel Self-made/
Φ300-Φ900 D80 7pcs
Reamer Purchase
Self-made/
Manipulator 1 set
Purchase
Hytek /
Reinforced 1 set
Sunny
Optional
tools
Self-made/
Mud mixing 3m³ 1 set
Purchase
Max. Push & Pull 406/812 kn Max Rotation Speed 135 r/min
Force
Max. Push & Pull 30 m/min Max. Mud Pump Flow 450 L/min
Speed
Caterpillar Walking 3-5 km/h Max. Mud Pump 8 Mpa
Speed Pressure
Enter Drill Angle 12-25° Max. Climbing Gradient 18°
Max. Aperture Φ1100 mm (Soil Max. Crossing Length 600 (Soil Depended)
Diameter Depended)
1. Close-circuit system is adopted for rotation. Automatic variable system is adopted for push & pull,
clamping, and walk and and it is under load sensitivity control. Advanced hydraulic system raises more
than 20% productivity than traditional one, and saves more than 20% energy compared with traditional
one.
2. The machine is equipped with Cummins engine, with high efficiency, large power, low fuel consumption,
low noise, and strong ability in construction.
3. Four bar linkage luffing structure is adopted for main ginder, which highly increases entry angle range
and ensures the large angle and rig tracks are not off ground, having improved the safety performance.
4. Wire-control walking system can ensure the safty when the machine performs walk, transfer and load &
unload.
5. Equipped with φ76×3000mm, φ83×3000mm or φ83×4500mm drill rod, the machine contains medium
field area, meeting the requirement for high efficiency construction in small place.
6. Main hydraulic components are from the international first-class hydraulic components manufacturer,
which greatly improve the reliability of the product performance and safety.
7. Electric design is reasonable with low failure rate, which is easy for maintenance.
8. The steel track with rubber plate is adopted for crawler, which can not only bear high load, but also
satisfy walking on different roads.
9. The rack and pinion structure is adopted for push & pull, which features high efficiency, long lifespan,
stable work and convenient maintenance.
10. You can choose optional manipulator.
For Better City!
III. Pictures
Optional : Manipulator