Академический Документы
Профессиональный Документы
Культура Документы
Note: Red font color or gray highlights indicate text that appears in the Answer copy
only.
Topology
Objectives
Part 1: Configure an IPv4 Floating Static Route
Part 2: Test Failover to the IPv4 Floating Static Route
Part 3: Configure and Test Failover for an IPv6 Floating Static Route
Background
In this activity, you will configure IPv4 and IPv6 floating static routes. These routes are
manually configured with an administrative distance greater than that of the primary
route and, therefore, would not be in the routing table until the primary route fails. You
will test failover to the backup routes, and then restore connectivity to the primary
route.
De año en año, Cisco ha actualizado muchas versiones con preguntas de diferencia. La última versión es la
versión 6.0 en 2018. ¿Cuál es su versión? Depende de que tu instructor cree tu clase. Le recomendamos que
piense en todas las versiones si no está claro. Mientras realiza la prueba en línea con netacad.com, puede recibir
preguntas aleatorias de todas las versiones. Cada versión tiene de 1 a 10 preguntas diferentes o más. Después
de revisar todas las preguntas, debe practicar con nuestro sistema de prueba en línea yendo al enlace "Prueba en
línea" a continuación.
Version 5.02 Version 5.03 Versión 6.0 Evaluación en lí
Examen del capítulo 2 Examen del capítulo 2 Examen del capítulo 2 Prueba en líne
Siguiente capítulo
Examen del Capítulo 3 Examen del Capítulo 3 Examen del Capítulo 3 Prueba en línea