Академический Документы
Профессиональный Документы
Культура Документы
SOLUTION REPORT
Q. 1
In a simple 4-bar linkage as shown, if link BC is fixed then the mechanism will
be
Solution :
(c)
Because shortest link is coupler.
D It will not form a mechanism
QUESTION ANALYTICS
Q. 2
Solution :
(b)
QUESTION ANALYTICS
Q. 3
B 0.5
C ∞ Correct Option
Solution :
(c)
D 1
QUESTION ANALYTICS
Q. 4
A Helical gear
Solution :
(b)
QUESTION ANALYTICS
Q. 5
2 Correct Option
Solution :
2
QUESTION ANALYTICS
Q. 6
10 Correct Option
Solution :
10
QUESTION ANALYTICS
Q. 7
A pinion transmits a torque of 60 N-m while rotating at 600 rpm. If the gear
ratio is 3, the power transmitted by the gear in kW is _______.
FAQ Have any Doubt ?
Solution :
3.77 (3.50 - 3.90)
QUESTION ANALYTICS
Q. 8
The flywheel of a steam engine has a mass of 1500 kg and radius of gyration
1.5 m. The starting torque of the steam engine is 1000 N-m. The kinetic energy
of the flywheel after 6 sec from the start is
FAQ Have any Doubt ?
Solution :
(a)
B 5.932 kJ
C 10.573 kJ
D 4.932 kJ
QUESTION ANALYTICS
Q. 9
A 100 m/s2
Solution :
(b)
C 43.43m/s2
D 36 m/s2
QUESTION ANALYTICS
Q. 10
A 0
B 2
C 1 Correct Option
Solution :
(c)
D -1
QUESTION ANALYTICS
Q. 11
The linear velocity of the reciprocating roller follower when it has contact with
the straight flanks of the tangent cam, is given by
A Correct Option
Solution :
(a)
B
QUESTION ANALYTICS
Q. 12
A pinion has 40 teeth, a module of 2 mm and rotating at 800 rpm drives another
gear. If the centre distance between mating gears is 120 mm, then the teeth on
gear and its speed respectively are
FAQ Have any Doubt ?
Solution :
(c)
D 100 and 800 rpm
QUESTION ANALYTICS
Q. 13
For the four-bar mechanism shown in figure, the link 2 is rotating clockwise
with an angular velocity of 20 rad/s. Lengths of links given in figure are in mm.
Then the velocity of point C on link 4 at the given instant is ________ m/s.
FAQ Have any Doubt ?
4 Correct Option
Solution :
4
QUESTION ANALYTICS
Q. 14
The annulus gear A as shown rotates at 300 rpm about the axis of the fixed
wheel S which has 80 teeth. The three armed spider (only one arm ‘a’ is shown)
is driven at 180 rpm in the same direction as of gear A. Number of teeth
required on the wheel P is _______.
Solution :
20
QUESTION ANALYTICS
Q. 15
Maximum fluctuation of kinetic energy of a flywheel in an engine has been
found to be 2000 J while running at a mean angular speed of 150 rpm. If the
total fluctuation of speed is not to exceed ± 1 %, the mass moment of inertia of
the flywheel in kg-m2 is _______.
FAQ Have any Doubt ?
Solution :
405.28 (400-410)
QUESTION ANALYTICS
Q. 16
In a flywheel, the safe stress is 25 MN/m2 and its density is 7 g/cm3. The
maximum peripheral velocity will be __________ m/s.
FAQ Have any Doubt ?
Solution :
59.76 (58-61)