Академический Документы
Профессиональный Документы
Культура Документы
Table of Contents
1. Introduction Page 3
1. Introduction :
This document contains the release notes for AirN@v Maintenance for A320fam/A330/A340/A380.
Information to be taken into account for this version:
• To know the meaning of the abbreviations used in the Release Notes, please refer to the AirN@v Glossary function.
• Implementation of density display: When using the Word Search function, users can see the density of results displayed in the table of
content. These news icons allow to identify easier the chapter (section, tasks...) which contains most of results.
• This version of AirN@v Maintenance requires ADOC N@vigator V3.17 or higher.
Description: When printing a large document, the printed document can be truncated.
Description Operational Impact : Many occurrences of the same attachment are displayed which increase the risk for
application instability
Description: If the user has more than one anchorId for an attachment, when exporting and reattach this
attachment, it appears twice in the publication.
Workaround or issue : After exporting attachments, check and clean each "*.sgm" document before re-import the
zip file.
Description: Some tasks containing large tables take too much time to be loaded.
Short description Silent Print not available for Job Card package
Identification type: correction ref: 3621
Description Operational Impact : customer cannot use this option to print Job Cards
Description: when printing a Job Card, the option "Silent Print" is not available.
Description Operational Impact : Non effective information should not be displayed in case of "Hidden" setting selected
Description: SVR has found an issue on the printing of their job card, titles of non effective figures are printed
although the user preference is set to "Hidden".
Workaround or issue : The customer can print through a normal print without using the job card printing function
Short description Aircraft Search function is missing in the Applicability Configuration windows
Identification type: correction ref: 3636
Description Operational Impact : The Aircraft Search function is missing in the Applicability Configuration windows. This
function added with AirN@v v3, has been removed due to some limitation. According to them, it generates a
significant lost of time.
Description Operational Impact : The customer is wondering if the subject printed figure is effective as the CONF part refers
to the applicability aspect.
Short description Job Card module: Attached document are not printed
Identification type: correction ref: 3685
Description Operational Impact : There is an option "Print attached documents" in the printing option windows for Job Card
module. This option once ticked, enable the user to directly print the attachment at the end of the document.
However this option does not work properly.
Description Operational Impact : User does not see that the information has been revised.
Description: There is no revision bar displayed when the effectivity is revised in one specific case (2 SGML tags
REVST/REVEND).
Description Operational Impact : The user feels he cannot use the wild card character and therefore that he cannot search
from only part of a reference.
Description Operational Impact : Non effective information should not be displayed in case of "Hidden" setting selected
Description: SVR has found an issue on the printing of their job card, titles of non effective figures are printed
although the user preference is set to "Hidden".
Workaround or issue : The customer can print through a normal print without using the job card printing function
Description Operational Impact : Highlighted elements in illustrations are not clearly visible by users.
Description: When browsing in the TOC, it moves on the right. If the user wants to select another location, he has
to move the bar on the left to allow selection of another ATA.
Description Operational Impact : The paper orientation proposed in the Printing options is "Portrait" by default instead of
"Landscape".
Description Operational Impact : When attaching a document to the ESPM manual, the document is well attached however
there is no attachment icon in the TOC. Furthermore, the document can not be retrieved in the "Manage
attachment" menu.
Description Operational Impact : When several panels are listed in the AMM, they are not listed sequentially with separator.
Description Operational Impact : Very time consuming as user have to attach manually your document to each anchor point
Description : In AirN@v v3, it is not possible to attach one attachment in various anchor location as it was in
AirN@v v2.
Short description Error message occurrence once AirN@v v3 link clicked and Java launcher appears
Description: When clicking on the AirN@v v3 link, Java launcher appears and then the following error occurs:
"The following plugin elements have caused an error: awn_kernel. The application could have malfunctions."
Short description Error message when using Dynamic Wiring FIN Search
Identification type: limitation ref: 3454
Description Operational Impact : User is unable to get the FIN results in Dynamic Wiring module
Description: In some cases, when looking for a FIN reference in the Dynamic Wiring module, an error message is
encountered: "An error occurred requesting the server"
Description Operational Impact : When launching AirN@v, a warning message "certificate unknown" appears because the
Airbus java security certificate is not up-to-date.
Description Operational Impact : When attaching a PDF, the display within AIRNAV is blurred.
Short description Not possible to run the console as administrator when ADOC is installed on a different drive than the C:
drive
Identification type: limitation ref: 3629
Description Operational Impact : Customers cannot install AirN@v services if they have installed their ADOC N@vigator on
another drive than their system drive.
Description Operational Impact : There is an option "Print attached documents" in the printing option windows. This option
once ticked, enable the user to directly print the Airline comment at the end of the document. However this option
does not work properly in some cases described below with more details.
3. Previous versions
1. Modification list for version V3.9.4
Description Operational Impact : PIPC Neo CFM manual cannot be opened due to effectivity management issue.
Description Operational Impact : Users cannot access to the Conditional Spares description for a part number.
Description Operational Impact : After clicking on some part numbers in the AIPC manual, user can be disconnected from
AirN@v.
Description Operational Impact : Some part numbers informations cannot be consulted neither threw the PN window notr
using the search form Numerical Index.
Description Operational Impact : In "hidden" mode, a error message appears when users filter on a specific MSN in the AWL
manual.
Short description AMM graphics not well displayed when printing current display
Identification type: correction ref: 3011
Description Operational Impact : When printing AMM graphics from which a "zoom in" has been made, the footer overlaps
the graphic.
Description : Using the Word Search, an error message is displayed when the occurrence is found in a figure "An
error occurred while opening a document".
Description Operational Impact : User is not able to consult a publication AirN@v Maintenance through AirbusWorld.
Description : On AirbusWorld, one user cannot open one publication. He can open others publications AirN@v
Maintenance. Issue occurs when user has unselected all aircraft on the "Filtering effectivity" function in a previous
session.
Description Operational Impact : User is not able to transfer attachments from a previous publication to a new publication.
Description : In some cases, the export of attachments fails. The issue comes from attachments previously
imported which contains some discrepancies. The attachments import succeed with incorrect information. Then,
the attachments export fails.
Description Operational Impact : User does not know if the printed document is correct.
Description : Users encounter an error message when printing some AMM tasks. The error message "An error
occurred during the preview generation. Some parts of the original document might be missing. Part of the
content overflows the visible frame and could not be rendered". This is a warning message to explain that the
printed document can be incomplete.
Description Operational Impact : The transfer of attachments from a previous publication to the new publication can be
incomplete. This may cause some misunderstanding.
Description : The Export attachments function available on "Administration Console" / "Manage Attachments"
does not work correctly if the administrator makes a selection of relevant attachments before exporting.
Description: When a user tries to attach a document with more than 24 characters in the ID Field, the application
freezes and the publication gets corrupted.
Description Operational Impact : customer might follow the wrong procedure as both links are identical
Description: On some specific cases, when looking for a link to two different procedures (with a variant), both
links are identical and there is no possibility to identify which link leads to which procedure
Short description KEYs of elements containing dots found when searching a PN information
Identification type: correction ref: 3600
Description Operational Impact : When searching a PN Information, an error may occur due to an AWN limitation. Indeed, in
some cases KEYs of elements contain dots.
Description Operational Impact : When searching a PN information in IPC manual, an error pop-up appears on the main view
with the following message: "An unexpected error occurred on the server".
Short description AWN freezing after clicking on three TSM hyperlinks to IPC
Identification type: correction ref: 3715
Description Operational Impact : Clicking on TSM hyperlinks to IPC when two clicks from TSM hyperlinks to IPC are already
opened, AirN@v is freezing and the Java process needs to be killed.
Description Operational Impact : This hyperlink allowing navigation from Service Bulletin list to part of manual (graphic or text)
is not displayed.
Description Operational Impact : Printing an element which contains an attached document, only prints the element but not
the document attached, even if "print attached document" in the printing option is ticked.
Description Operational Impact : The Job Card Header displays "applicability_text" in A/C Reg section instead of the A/C
range.
Description Operational Impact : Missing mandatory information to ensure that the JobCard will be done on the right aircraft
Description: When a user wants to print a Job Card using the button "Print Job Card", the selected MSN is not
printed on the Job Card header.
Description: In AMM for some tasks and subtasks, the panel number is not correctly displayed.
Description: When user prints a document, the header displays incorrect information related to the Aircraft type
Description Operational Impact : Printed reference for figure is different than Figure reference in AirN@v which could be
misleading
Description: When printing a figure in AirN@v, the configuration number is missing in the figure reference in the
print header and figure footer.
Description: Print from AirN@v directly to printer takes a very long time.
Short description AMM Task effectivity for A319 and A320 are missing
Identification type: correction ref: 3500
Description: When selecting a TASK and then clicking on the Zone listed in the Job Set up information, the zone
opened is not the correct one, it applies to another effectivity.
Short description TSP - Find a TSM task related to IAE chapters not working
Identification type: correction ref: 3516
Description Operational Impact : User is not able to find the relevant TSM task related to a Fault Message.
Description : On TroubleShooting, it is not possible to find TSM tasks searching Fault Messages or Warning
Malfunctions related to IAE chapters.
Short description AIPC Numerical Index: Target has not been reached automatically
Identification type: correction ref: 3523
Description Operational Impact : User does not systematically find his reference when clicking on one Numerical Index result
Description: For some Part Number, when clicking on them on the Numerical Index result window, the AIPC
manual is opened, but not at the Part Number level: user has to click on "Text continue, see text below" until
reaching the correct Part Number reference
Description Operational Impact : User is unable to reach AirN@v Maintenance TSM from AIRMAN-web.
Description : The link from AIRMAN-web to AirN@v is not working in some cases on AirbusWorld. User cannot
open the publication directly from AIRMAN-web and has an error message.
Description Operational Impact : Displayed information is very difficult to read for customer
Description: In some cases, when print a JobCard Package, the A/C Reg information displayed in the header
contains the Engine type, which makes it very difficult to read
Description: When consulting AIPC Manual Front Matter, all figures links open a "Warning image not found"
window
Description: In an AMM table, when a Note is written in a cell, the line might be wrongly displayed.
Description Operational Impact : The user thinks that the illustration is missing.
Description : The message "Warning: image not found" is displayed while the illustration is deleted. It should have
the message 'DELETED'.
Description Operational Impact : User has to wait a long time before being able to retrieve its print result
Description: When printing some IPC Figures which contains a lot of hyperlink, the printing time is extremely slow
Short description Application Code discrepancy between CML and AMM tasks
Identification type: correction ref: 3608
Description Operational Impact : Application code discrepancy between CML and AMM tasks have been detected.
Description Operational Impact : Customers get confused with the reliability of the information displayed, and need to spend a
lot of time analysing the relevance of the information displayed
Short description Multiple link missing from Figure Item to Figure sheets in AIPC
Identification type: correction ref: 3639
Description Operational Impact : In the Detailed Part List, when clicking on a Figure Item reference which has several targets,
there is no multiple link. The target is always the first sheet.
Description Operational Impact : The attribute alunqi of elements TASK, SUBTASK, and GRAPHIC is not displayed.
Description Operational Impact : As customers are not able to consult results, they are impacted in their everyday work.
Description: Unable to consult ECAM Warnings in Troubleshooting - You get disconnected from server.
Description Operational Impact : Airline revision is identified by a green star and a vertical line, instead of a green star only.
Description Operational Impact : Applicability is displayed above the content which is confusing.
Description Operational Impact : In AMM, in Equipment List table, the content of Zone column is displayed in Access Door
column.
Description Operational Impact : The content of the JobCard Package does not show OMP Skill code information at
Maintenance procedure level.
Description Operational Impact : User is not able to find easily the expected information.
Description : Using the Word Search, an error message is randomly displayed in some searches.