Академический Документы
Профессиональный Документы
Культура Документы
Deburring | Chamfering
Handheld, mobile and stationary machines
Assfalg chamfering and deburring machines
for chamfering, deburring, rounding edges,
and preparing weld seams
Assfalg GmbH
Buchstraße 149
73525 Schwäbisch Gmünd
Germany
Phone +49 (0) 71 71 92 505-0
Fax +49 (0) 71 71 92 505-50
info@assfalg-metal.com
www.assfalg-metal.com
Assfalg machines
in application
02
Deburring | Chamfering
Handheld, mobile and stationary machines
Straight
edges Contours
Legend
Handheld
machines
Mobile and
stationary machines
KBM 18 20
Chamfering Machine,
selfpropelling
16
mm
Straight edges
Straight edges
ASO 900 | 22
ASO 900 Plus |
ASO 900 Plus-Bigger
56 Chamfering Machine,
mm
selfpropelling
Straight edges
ASO 930 | 23
ASO 930 Plus
Chamfering Machine,
selfpropelling
74
mm
Straight edges
ASO 910 24
Chamfering Machine,
selfpropelling
50
mm
Straight edges
ASO 920 25
Chamfering Machine,
selfpropelling
90
mm
Straight edges
04
Deburring | Chamfering
Handheld, mobile and stationary machines
Straight
edges Contours
Legend
Stationary
machines
FS 5 30 MMB 400 | 40
Beveling Machine MMB 500 |
with V-prism MMB 600
2 30 Chamfering Machine,
mm mm
angle adjustable
Straight edges Straight edges
ASO 850-K 31
Beveling Machine
with V-prism
for Straight Edges
5
mm
Straight edges
05
Stationary
machines
MZ 35 | MZ 90 58
Centrifuge
06
Deburring | Chamfering
Handheld, mobile and stationary machines
Straight
edges Contours
Legend
Stationary
machines
UA 5 59
Power Engine
NEUTRIX 61
Electrode Grinding Machine
07
The high quality hand deburrers are a favourite and wanted compact tool for
the daily manual use. You can deburr drills, slots and edges. Varied blades for
different works are available. Rotatable blades adapt to the contour of the
Universal Hand Tool A
workpiece.
Universal Hand
Technical data Mango II • Tool A • GLO-BURR •
Blade holder B, C, E B, C, E –
Blade B, C, E B, C, E E
Max. chamfer width 1 mm 1 mm 1 mm
Weight 0.08 kg 0.08 kg 0.02 kg
No. 61111 63 63258
08
˭˭ Deburring of edges and bore ˠˠRobust construction ˠˠGrinding belts in different grain sizes
iameters and workpieces with
d ˠˠLow weight
the most different contours ˠˠ360° swivelling grinding arm Delivery contents
˭˭ Processing of workpieces made of
steel, hardened steel, aluminium, ˠˠ3 x grinding belt 330 x 10 mm
non-ferrous metal and plastics (only by DHB 330)
˭˭ Processing of close slots, small ˠˠ3 x grinding belt 520 x 20 mm
(only by DHB 520)
breaches and difficult
to access places
ˠˠAllen key 4 mm
101-E
MTQ 100 MH | F3 | F6 | S3 | MT W
Electric Grinder
The handy and powerful electric grinders are optimally suited for individual
applications for deburring, cutting, grinding and polishing. Confined spaces and
every 3D-shapes can be processed using various grinding tools and rotary burrs.
Application
S3
F3
Professional advantages
F6
ASO 300
˭˭ For large and heavy workpieces ˠˠAbsolutely burr-free cutting ˠˠRadius inserts R1 – R2 mm
˭˭ 45° chamfering of flat workpieces ˠˠClean and consistent processing of ˠˠA special roller bearing for sheet
component parts and series thickness between 2-5 mm (only for
made of steel up to 1 000 N/mm²,
aluminium, brass, copper, plastics,
ˠˠFast convert or replace of the ASO 310)
acrylic glass, wood and much more
carbide-cutting inserts ˠˠPlastic disk for scratch-free surfaces
ˠˠSuitable for continuous operation
˭˭ Pre-dominantely for contours but
Delivery contents
also for straight edges
˭˭ For r ounding edges ˠˠHook spanner ø 58 – 65 mm
(only ASO 310) ˠˠTorx key T 9
˭˭ Bores with Ø > 6 mm can ˠˠSetting gauge
be processed
ˠˠCutter head with cutting inserts
ˠˠ Compressed air hose without nipple
ˠˠOperating instructions
Technical data ASO 300 • ASO 310 •
Motor 0.15 m³/min. | 28 000 rpm 0.4 m³/min | 13 000 rpm
Energy 6 bar 6 bar
Max. chamfer width 1 mm 2 mm
Guide ball bearing min. ø 6 mm min. ø 11 mm
Cutter head 45° 45°
Weight 0.5 kg 1.8 kg
No. 61881 20039
13
ASO 312
Angular
Handheld Straight edges Radius milling adjustment
˭˭ For large and heavy workpieces ˠˠAbsolutely burr-free cutting ˠˠRadius inserts R2 – R4 mm
˭˭ Chamfering of flat workpieces ˠˠClean and consistent processing of
component parts and series
made of steel, stainless steel, Delivery contents
cast iron, aluminum, brass and
ˠˠFast retrofit or replace of the
carbide-cutting inserts
plastics ˠˠAllen key 3 mm
ˠˠWear-resisting, hardened guide rails
˭˭ Chamfering of straight edges in ˠˠAllen key 4 mm (only with ASO 313)
ˠˠLong useful life of the cutting inserts
ˠˠTorx key T 15
different angles ˠˠ Adjustable according to right- or
left-hander
ˠˠHandle grip
˭˭ Rounding edges ˠˠCutter head with cutting inserts
ˠˠAngle-adjustable rails
ˠˠSwarf box (only with ASO 313)
ˠˠOperating instructions
SMA 20-PF25
SMA 20-EF24
˭˭ For large und heavy workpieces ˠˠAbsolutely burr-free cutting ˠˠRadius inserts R1,2 – R2,5 mm
˭˭ Chamfering of flat workpieces ˠˠAdaptable, also at difficult contours
made of steel, stainless steel,
ˠˠClean and consistent processing of Delivery contents
component parts and series
cast iron, non-ferrous metals
ˠˠFast convert or replace of the
and plastics
carbide-cutting insert
ˠˠCopper paste
˭˭ Chamfering of contours and also ˠˠTorx key T 15
ˠˠSmall cutter head with cutting inserts
straight edges also for bores from ø 19,4 mm
ˠˠOperating instructions
˭˭ Rounding edges ˠˠVery economic insert price, because of
8 usable cuts per insert
SMA 30-EVR24
SMA 30-PV25
Angular
Handheld Straight edges Contours Radius milling adjustment
˭˭ For large und heavy workpieces ˠˠAbsolutely burr-free cutting ˠˠRadius inserts R1,2 – R6 mm
˭˭ Chamfering of flat workpieces ˠˠExact adjustment due to existing scale ˠˠCutter heads with various angular
made of steel, stainless steel,
ˠˠSmall cutter head with cutting inserts degrees
also for bores from 10 mm
cast iron, aluminum, brass and
plastics
ˠˠLow tool costs-each insert has 8 cuts Delivery contents
ˠˠLong useful life due to stable,
˭˭ Chamfering of contours and also screwed cutting inserts
straight edges
ˠˠAllen key 3 mm
ˠˠTorx key T 15
˭˭ Rounding edges ˠˠTool box
˭˭ Air pressure machine more suita- ˠˠOperating instructions
ble for continuous work
SMA 40-E
SMA 40-P
Angular
Handheld Straight edges Contours Radius milling adjustment
˭˭ For large and heavy workpieces ˠˠAbsolutely burr-free cutting ˠˠRadius cutter and radius inserts from
˭˭ Chamfering of flat workpieces ˠˠProper processing for welding prepa- R2 – R8 mm
made of steel, stainless steel,
ration ˠˠ Cutter heads in various angular degrees
cast iron, aluminum, brass, and
ˠˠ Efficient chamfer retooling system ˠˠGuide ruler for straight edges
plastics
ˠˠSpecial spring technology saves the ˠˠ3D- swivel arm
tools
˭˭ Chamfering of contours and also ˠˠBetter tool life for cutting inserts Delivery contents
straight edges ˠˠErgonomic two-hand operation
˭˭ Rounding edges ˠˠAllen key 5 mm
˭˭ For preparing weld seams ˠˠTorx key T 15
ˠˠTool box
ˠˠOperating instructions
SMA 60-EVS
Chamfering Machine, handheld, electric
Most powerful hand machine center for hand use. Highly advanced
technology allow large bevells in a soft and smooth cut - even in one pass.
SMA 60-EVS
Angular
Handheld Straight edges Contours Radius milling adjustment
˭˭ For large and heavy workpieces ˠˠAbsolutely burr-free cutting ˠˠRadius cutter and radius inserts from
˭˭ Chamfering of flat workpieces ˠˠProper processing for welding prepa- R1,2 – R15 mm
made of steel, stainless steel,
ration ˠˠCutter heads in various angular
cast iron, aluminum, brass, and
ˠˠ Efficient chamfer retooling system degrees
plastics
ˠˠSpecial spring and mass technology ˠˠGuide ruler for straight edges
allows a heavy and soft cut ˠˠ3D-swivel arm for ease of operation
˭˭ Chamfering of contours and ˠˠBetter tool life for inserts and cutter
straight edges ˠˠErgonomic two-hand operation Delivery contents
˭˭ Rounding edges
˭˭ For preparing weld seams ˠˠAllen key 5 mm
ˠˠTorx key T 15
ˠˠTool box
ˠˠOperating instructions
Angular
Handheld Straight edges adjustment
˭˭ For large and heavy workpieces ˠˠSimple chamfer and angle adjustment ˠˠFixture for tubes with external diame-
˭˭ Suitable for sturdy continuous ˠˠWearresisting, hardened guide ter 150 mm and more
operation with manual feed
ˠˠGuide plates with rollers for easy
pushing (only ASO 760-2)
Delivery contents
˭˭ For preparing weld seams ˠˠSturdy casting construction with
ergonomic handle
˭˭ Ideal for chamfering at steel ˠˠAllen keys 4 and 5 mm
and non-ferrous metal ˠˠCutter head with cutting inserts
ˠˠElectric cable without plug
ˠˠOperating instructions
ASO 760-3
Chamfering Machine, Deburring Machine,
handheld, electric
The compact handheld chamfering machine is particularly suitable
for weld seam preparation of large workpieces.
The new, 3-row cutter head with screwed cutting inserts is advantageous
for heavy cuts in aluminium or stainless.
Angular
Handheld Straight edges adjustment
˭˭ Suitable for sturdy continuous ˠˠSimple chamfer and angle adjustment ˠˠFixture for tubes with external diame-
operation with manual feed ˠˠWear resisting, hardened guide plates ter 150 mm and more
with rollers for easy pushing
˭˭ For preparing weld seams
ˠˠSturdy cast-iron construction with Delivery contents
˭˭ Ideal for chamfering at steel, ergonomic handle
stainless steel and non-ferrous
metals
ˠˠAllen keys 4 and 5 mm
ˠˠTorx key T 15
ˠˠCutter head with cutting inserts
ˠˠElectric cable without plug
ˠˠOperating instructions
KBM 18
Chamfering Machine, selfpropelling
The automatic chamfering machine for rough shearing of edges by means of
a cutting wheel is ideal for quick and noisless bevelling. It can be used statio-
nary or portable.
Angular
Mobil Stationary Straight edges adjustment
˭˭ Workpieces > 200 x 60 x 6 mm ˠˠAutomatic feed ˠˠ Chamfer cutter for steel / stainless steel
˭˭ Fastest chamfering with lowest ˠˠ Easy angle adjustment ˠˠMobile undercarriage with height
noise at metal sheets and plates
ˠˠEasy operation and setting adjustment
ˠˠSturdy construction
˭˭ Weld seam preparation
Delivery contents
V-, X-, K- or Y-seam
˭˭ Universally applicable for almost ˠˠStandard accessories
all metals up to 700N/cm2 ˠˠUniversal milling cutter 30°
ˠˠElectric cable without plug
ˠˠOperating instructions
Quicker
Quicker | Maxiquicker
Chamfering Machine, selfpropelling
The automatic chamfering machines Quicker | Maxiquicker are
designed for the stationary and portable use in weld seam preparation.
A cutting wheel shears off the edge in a low-noise and dust-free way,
leaving a rough chamfer. High feed rate.
Maxiquicker
Angular
Mobil Stationary Straight edges adjustment
Quicker: 12 mm
Maxiquicker: 25 mm
˭˭ Workpieces > 200 x 60 x 8 mm ˠˠBest tool life also in stainless steel ˠˠDifferent cutters according to application
ˠˠThe setting of angle and also of ˠˠSpeed regulation
˭˭ Especially suitable for heavy, plate thickness is easily done ˠˠAutomatic hight adjustment according to
long and large-size workpieces ˠˠAutomatic feed adjustment de- plate thickness
˭˭ Universal for all materials,
pending on the relevant material ˠˠSpecial version for workpiece thickness-
from 0 – 1 m/min. es: 8 – 100 mm or 8 – 200 mm or < 8mm
suitable for continuous operation
ˠˠSturdy cast iron/steel construction,
˭˭ Mobile operation of roller hardened work table with guide Delivery contents
carriage or with crane support rollers
or stationary ˠˠWorking height 800 – 980 mm ˠˠAllen key 8 and 10 mm
ˠˠElectric cable without plug
ˠˠOperating instructions
Technical data ASO 900 • ASO 900 Plus • ASO 900 Plus-Bigger •
Motor 4.0 kW | 750 rpm 4.0 kW | 750 rpm 5.5 kW | 0–750 rpm
Energy 400 V, 50/60Hz 400 V, 50/60Hz 400 V, 50/60Hz
Max. chamfer width 50 mm 56 mm 56 mm
Angular adjustment 15° – 60° 15° – 80° 15° – 80°
Automatic feed 0 – 1 m/min 0 – 1 m/min 0 – 1 m/min
Work piece thickness 8 – 50 mm 8 – 60 mm 4 – 100 mm
Weight 175 kg 215 kg 310 kg
No. 42699 63133 64909
23
Angle
adjustment
0° ASO 930
70
°
76
˭˭ Especially for heavy, long and ˠˠ Simple bevel- and angle adjustment ˠˠSpeed regulation
large-area workpieces ˠˠ Automatic feed regulation depending ˠˠRoughing cutter head RC16 or SN16
on the material of 0 – 1.2 m/min ˠˠCutter head WSX for workpieces < 8mm
˭˭ Front- and bottom side surface ˠˠ Sturdy cast iron construction and smaller bevels
milling at an angle of 0° – 76° ˠˠ Hardened worktable with guide ˠˠSpecial version for workpiece thickness-
with milling widths up to 74 mm rollers es: 8 – 100 mm or < 8 mm
˭˭ Preferred for mobile use on a ˠˠ Working height 820 – 970 mm
roller carriage, but also with
Delivery contents
crane support or stationary
ˠˠAllen key of 8 mm and 10 mm
ˠˠElectric cable without plug
ˠˠOperating instructions
ASO 910
Chamfering Machine, selfpropelling
Recess chamfering or the removal of cladding of large sheets is mastered
excellently by the automatic chamfering machine ASO 910. Thanks to its robust
version, the machine achieves a chamfer width up to 50 mm and a chamfer
depth up to 15 mm. The machine is unique in this performance category.
Angular
adjustment
˭˭ Especially suitable for heavy, long ˠˠFeed in X- and Z-axis, as well chamfer ˠˠSpeed regulation
and extensive workpieces angle is easily adjusted ˠˠFace-milling, square shoulder or radius
˭˭ This machine is universal for ˠˠAutomatic feed adjustment depending chamfer can be used, depending on the
on the relevant material from relevant recess outlet
all materials and suitable for
continuous operation
0 – 1 m/min. ˠˠSpecial version for workpiece
ˠˠSturdy cast iron/steel construction, thicknesses: 6 – 200 mm
˭˭ Recess chamfering or slight hardened work table with guide rollers ˠˠSpecial version for wider thickness
bevelling at angles of 90° – 75° ˠˠWorking height 930 – 1 120 mm range from 6 - 200 mm is needed
regarding the perpendicular ˠˠExtension of the axis adjustment up to
100 mm
˭˭ Mobile operation of roller
carriage or with crane
Delivery contents
support or s tationary
ASO 920
Chamfering Machine, selfpropelling
The largest welding chamfers - in tulip shape - can be cut efficiently with
the ASO 920. This automatic chamfering machine convinces in this league
of performance.
30 °
Angle
adjustment
90
˭˭ Especially for heavy, long and ˠˠSimple chamfer- and angle adjustment ˠˠAllen key of 8 mm and 10 mm
large-area workpieces ˠˠAutomatic feed regulation depending ˠˠElectric cable without plug
˭˭ Universally suited for all kinds
on the material of 0 – 1.2 m/min ˠˠOperating instructions
of material and for continuous
ˠˠInfeed in Z up to max. 90 mm
is possible
operation
ˠˠInfeed in X up to max. 55 mm
˭˭ Tulip shape-milling at an angle is possible
of 0° – 30° with respect to the ˠˠSturdy cast iron construction,
vertical hardened work table with guide rollers
˭˭ Preferred for mobile use on a ˠˠWorking height 920 – 1 110 mm
roller carriage, but also with crane
support or stationary
BKE 550
Sheet Deburring Machine
The compact plate deburring machine is suitable for deburring
of straight plate edges.
˭˭ Fast deburring on both sides in ˠˠSturdy sustainable sheet construction ˠˠ Flap wheels for steel and stainless steel
one operation with exhauster with different grain sizes
˭˭ For small sheets in horizontal ˠˠGrinding wheels readjustable via hand ˠˠDust extraction
wheel
operation and large sheets in
vertical operation
ˠˠQuick plate thickness adjustment by Delivery contents
screws
˭˭ Universal for all materials ˠˠEasy handling and fast tool change
from 1 – 5 mm thickness
ˠˠLongitudinal stop
ˠˠ2 flap wheels
ˠˠExtraction socket
ˠˠOperating instructions
AF 165
Beveling Machine with Sanding Disc
Very efficient in removing saw burrs and sharp edges. Workpieces can be
handeled and processed safely. Fast and cost effective deburring. The tool
life of flap discs or CBN/Diamand grinding wheels is rather economic.
KSM 130
˭˭ Soft and hard materials ˠˠSturdy construction with grinding disk ˠˠMobile undercarriage
up to 63 HRC adjusting button
ˠˠWater cooling provides workpiece Delivery contents
and grinding disk
ˠˠV-Prism with micrometer chamfer ˠˠStandard accessories
adjustment ˠˠGrinding disk
ˠˠSturdy conical 2-zone grinding disk for ˠˠOperating instructions
strong material removal ˠˠExtraction socket (KSM 125)
ˠˠWater tub and pump
(KSM 130)
˭˭ Burr-free chamfering of small ˠˠSurface protecting precision cham- ˠˠExtraction socket (ø outside 32 mm /
precision parts from 1 mm fers up to 2 mm (no scratches on the ø inside 20 mm)
thickness in almost polished surface) ˠˠExtraction device
precision ˠˠEasy operation
˭˭ This machine is universal for all ˠˠFast tool change, easy cutter setting Delivery contents
materials and suitable for
ˠˠSpeed control for processing different
materials
continuous operation ˠˠAllen key 2.5 mm
ˠˠSupported sliding carriage for clatter-
free milling
ˠˠPrism cutter
ˠˠOperating instructions
FS 5
Beveling Machine with V-prism
The FS 5 is a sturdy and cost-effective chamfering machine
with sliding cutter and tips. Straight edges of rectangular-shaped
workpieces can be easily chamfered. The workpiece must be
thicker than 2 mm.
˭˭ Clean and burr-free chamfering ˠˠEasy handling ˠˠRadius inserts from R1 – R3 mm
in a section ˠˠSturdy guide rails
˭˭ Suitable for almost all materials ˠˠFast change of cutter head and cutting Delivery contents
inserts
˭˭ Suitable for continuous operation ˠˠSmall chip box
ˠˠCutter head with cutting inserts
ˠˠChip box
ˠˠOperating instructions
Technical data FS 5 •
Motor 0.25 kW | 2 800 rpm
Energy 230 V, 50/60 Hz
Max. chamfer width 3 mm
Angular adjustment 45°
Dimensions (L×W×H) 400 × 325 × 170 mm
Weight 19 kg
No. 41408
31
ASO 850
Beveling Machine with V-prism for Straight Edges
The sturdy chamfering machine is designed for deburring and edge cutting of
small workpieces from 2 mm thickness. Thanks to the optimised interplay of
cutter head and cutting inserts, the machine ensures clatter-free, clean and
constant chamfering up to 3 mm × 45° in a section, even at stainless.
˭˭ For visually beautiful 45° ˠˠChamfer adjustment via micrometer ˠˠMobile undercarriage
chamfers button ˠˠAutomatic feed
˭˭ Universal for robust continuous ˠˠEffortless chamfering due to low ˠˠCorundum or CBN grinding disk for
cutting pressure hardened workpieces
operation
ˠˠSturdy cast iron construction with chip ˠˠVariable speed control
box 0 – 10 000 rpm
ˠˠWear resistant, hardened and ground
guide rails
Delivery contents
ˠˠWide variety of different cutting
inserts for various materials
ˠˠAllen key 4 and 8 mm
ˠˠOperating instructions
Angular
Stationär Straight edges Radius milling adjustment
10
mm
mm
10
ASO 650: 5 mm ASO 650-WSL
ASO 650-WSL: 7 mm
Application
Professional advantages
ASO 650
Applications
Professional advantages
ASO 160-SSL
ˠˠChamfer adjustment by micrometer ˠˠMobile undercarriage with big rubber ˠˠAllen key of 5 mm and 6 mm
screw rollers and integrated swarf drawer ˠˠTorx key T20
ˠˠSpeed regulation (ASO 160-SSL) ˠˠAutomatic feed for series production ˠˠAluminum block for processing front
ˠˠFast tool change and the processing of bars sides
ˠˠV-prism for ideal guidance of the ˠˠV-roller conveyor to extend the guide ˠˠMilling head equipped with inserts
workpieces bars ˠˠSwarf ejection tube
ˠˠHardened and polished guide bars (only with the ASO 160-SSL)
ˠˠSoft cutting pressure ˠˠOperating instruction
Automatic module
36
Application
Professional advantages
˭˭ Sharp-edged chamfering is
ossible, e.g. a 3 mm x 45 ° bevel
p
can be machined on a 3 mm thick
workpiece
˭˭ Small parts can be processed
quickly and easily by hand
˭˭ Bars are chamfered by means
of the automatic feed
˭˭ Constantly high surface quality
ˠˠChamfer adjustment by micrometer ˠˠMobile undercarriage with big rubber ˠˠAllen key of 5 mm and 6 mm
screw rollers and integrated swarf drawer ˠˠTorx key T20
ˠˠSpeed regulation (ASO 160-MSL) ˠˠAutomatic feed for series production ˠˠAluminum block as support for manu-
ˠˠFast tool change and the processing of bars ally feeding small workpieces
ˠˠV-prism for ideal guidance of the ˠˠRoller conveyor with V-prism to extend ˠˠFace cutter with inserts
workpieces the guide bars ˠˠSwarf ejection tube
ˠˠHardened and polished guide bars (only with the ASO 160-MSL)
ˠˠSoft cutting pressure ˠˠOperating instructions
WKF 170
Chamfering Machine, angle adjustable
The perfect machine for chamfering small to mid-size work pieces and bar
material. Thanks to its angle adjustment from 15° – 60°, it is mainly used for
weld seam preparation.
Angular
Stationary Straight edges adjustment
11
mm
mm
11
Application
˭˭ Minimum workpiece
thickness 1 mm
˭˭ Can be used for steel, max. 1 000
N/mm², aluminum, brass, copper,
plastics, from soft plastic to acry-
lic glass, wood and much more
˭˭ Deburring workpieces up to weld
seam preparation
39
Professional advantages
ˠˠAngular adjustment from 15 ° – 60 ° ˠˠMobile undercarriage with big rubber ˠˠTorx key T 25
(set-out every 5° possible) rollers and integrated swarf drawer ˠˠPlane cutter head with cutting inserts
ˠˠChamfer adjustment by micrometer ˠˠLateral stop for processing the front ˠˠLever support on the left side for set-
button side ting the chamfer angle
ˠˠSpeed control for processing different ˠˠLongitudinal stop for safe guidance of ˠˠOperating instructions
materials mass-produced parts
ˠˠUncomplicated tool change ˠˠAutomatic feed for single-part and
ˠˠHardened and polished guide rails series production and processing bar
ˠˠSoft cutting pressure materials
ˠˠRoller conveyors for extending the
guide rails
Angular
Stationary Straight edges adjustment
Application
Professional advantages
ˠˠAngle adjustment up to 25° – 60° ˠˠCutter head with round inserts ˠˠTory wrench
ˠˠSpeed regulation for the processing ˠˠSpecial construction for ˠˠAutomatic feed
of different materials round steel plates ˠˠSupport lever for angle setting
ˠˠAdjustable feed speed ˠˠRoller conveyors ˠˠCutter with inserts
ˠˠMinimum lubrication ˠˠMotor with 7.5 kW ˠˠOperation instruction
ˠˠMinimal lubrication device
Angular
Stationary Straight edges Contours Radius milling adjustment
2 2 1,5
mm
mm mm mm
mm
2 mm
2 1,5
Application
Professional advantages
ˠˠEasy operation ˠˠGuide finger, radius and chamfer cutter ˠˠAllen key 2.5 mm
ˠˠFast tool change with guide ball bearing ˠˠGuide ruler
ˠˠSpeed control (only with Speedy ˠˠV-prism attachment for processing ˠˠFull hard metal-form cutters ø 6,
ontur 270-KSL and Speedy Kontur
K straight edges pointed
320-KSL) ˠˠSlug remover-set for face milling ˠˠOperating instructions
ˠˠ Chamfer angle can be changed due to ˠˠExtraction socket
contour cutter with different point ˠˠVacuum cleaner with automatic
angles switch-on
Technical data Speedy Kontur 270-K • Speedy Kontur 270-KSL • Speedy Kontur 320 -K • Speedy Kontur 320 -KSL •
0.18 kW 0.14 kW 0.14 kW 0.14 kW
Motor
22 000 rpm 12 000 – 28 000 rpm 22 000 rpm 12 000 – 28 000 rpm
Energy 230 V, 50 Hz 230 V, 50 Hz 230 V, 50 Hz 230 V, 50 Hz
Max. chamfer width 2 mm 2 mm 2 mm 2 mm
Guide ball bearing min. ø 3 mm min. ø 3 mm min. ø 3 mm min. ø 3 mm
Dimensions (LxWxH) 270 × 170 × 120 mm 270 × 170 × 130 mm 320 × 200 × 140 mm 320 × 200 × 140 mm
Weight 8 kg 9 kg 12 kg 13 kg
No. 1011 1053 961 938
44
KKE 1 | KKE 2
Beveling Machine for Contours
Straight edges, bores, long holes, grooves are chamfered precisely, fast and
easily. V-prism attachment for the processing of straight edges rounds off
the whole package. The big help for a small price.
Angular
Stationary Straight edges Contours Radius milling adjustment
3
mm
3
mm
3
mm
mm mm mm
3 3 3
Application
Professional advantages
KKE 1
ˠˠCompact, handy tabletop unit next ˠˠV-prism attachment with extractor for ˠˠGuide ruler, box wrench 17 mm,
to the CNC milling machine and CNC straight edges union nut, allen key 3 mm,
lathe ˠˠGuide finger for stable guiding of work- collet ø 6 mm
ˠˠPrecise chamfer adjustment pieces with external contours ˠˠOpen-ended wrench 14 mm
ˠˠSpeed control for processing ˠˠInsert ring with borehole ø 8 mm
different materials ˠˠPrism with extraction socket, insert
ˠˠChamfer angle can be changed due ring with borehole ø 12 mm, collet
to contour cutter with different ø 8 mm, allen key 5 mm
point angles (only for KKE 2)
ˠˠFast tool change ˠˠOperating instructions
KKE 2
46
Angular
Stationary Straight edges Contours Radius milling adjustment
3
mm
3
mm
3
mm
mm mm mm
3 3 3
Application
Professional advantages
ASO 600-A
ˠˠCompact, handy tabletop unit next to ˠˠPrism attachment for straight edges ˠˠGuide ruler
the CNC milling machine and CNC lathe ˠˠGuide finger for the use of externd ˠˠInbuilt vacuum extractor for tube
ˠˠPrecise chamfer adjustment contour ø 32 mm
ˠˠChamfer angle can be changed due to ˠˠVacuum cleaner with automatic ˠˠOpen-ended wrench SW 17
contour cutter with different point switch-on ˠˠInsert ring with borehole ø 12 mm
angles ˠˠSpecial cutters on request ˠˠCollet ø 6 mm
ˠˠFast tool change with tool setting ˠˠUnion nut
device ˠˠOperating instructions
ˠˠHardened table with extraction socket
ASO 600-A
48
Angular
Stationary Straight edges Contours Radius milling adjustment
4
mm
4
mm
3
mm
mm mm mm
4 4 3
Application
Professional advantages
KKF 4
Further accessories can be found
in our Accessory Catalogue.
ˠˠPrecise chamfer adjustment by ˠˠMobile undercarriage with big rubber ˠˠInbuilt vacuum extractor for tube
micrometer button rollers ø 32 mm or ø 38 mm
ˠˠChamfer angle can be changed due to ˠˠPrism attachment for straight edges ˠˠInsert ring with borehole ø 30 mm
contour cutter with different point ˠˠRuler ˠˠCollet ø 6 mm, 8 mm, 10 mm and 12
angles ˠˠGuide finger for the use of external mm
ˠˠFast tool change contour ˠˠUnion nut
ˠˠWide selection of cutters ˠˠVacuum cleaner ˠˠOperating instructions
ˠˠSpeed regulation
ˠˠHardened machine table with
extraction socket
KKF 4
50
KKF 3
Chamfering Machine for Contours
It is our most powerful chamfering machine for edges and contours,
having the biggest supporting table. Its sturdy insert milling cutters are
ideally suitable for processing larger and heavier workpieces.
Angular
Stationary Straight edges Contours Radius milling adjustment
5
mm
5
mm
4
mm
mm mm mm
5 5 5
Application
Professional advantages
ˠˠPrecise chamfer adjustment by ˠˠMobile undercarriage with big rubber ˠˠInbuilt vacuum extractor for tube
micrometer button rollers ø 32 mm or ø 38 mm
ˠˠChamfer angle can be changed by using ˠˠVacuum cleaner ˠˠAllen key 4 mm
various insert milling cutters ˠˠRuler ˠˠTorx key
ˠˠFast and easy tool change ˠˠInsert milling cutters with guide ball ˠˠOperating instructions
ˠˠSpeed regulation bearing ø 16 mm or ø 30 mm
ˠˠHardened machine table with ˠˠRadius inserts R1 – R5 mm
extraction socket ˠˠAutomatic feed
Application
Professional advantages
Separator S95
TV 95-SL
ˠˠSimple emptying via an outlet at the ˠˠGrinding and polishing media for indi- ˠˠTimer
side of the machine vidual application ˠˠWater tank
ˠˠQuiet due to noise protection hood ˠˠAdditive (compounds) ˠˠPump
ˠˠWith timer ˠˠSeparator ˠˠSpeed regulation
ˠˠWith integrated water tank for wet ˠˠPaper filter ˠˠNoise protection cover
processing ˠˠCollecting tub ˠˠOperating instructions
ˠˠSturdy, long-life construction with
plastic-coated steel trough
inside
ˠˠMobile at any time by means of rollers
on the underside
ˠˠMixture ratio (grinding tool:
workpieces) 7:1 to 3:1
Accessories on request.
Features Options
Delivery contents
ˠˠDosing pump
ˠˠControl with speed regulation
ˠˠOperating instructions
ASM 18 | ASM 60
ASM 18
Accessories on request.
ˠˠSturdy, long-life construction with ˠˠGrinding and polishing media for indi-
plastic-coated steel trough vidual application
inside ˠˠAdditive (compounds)
ˠˠEasy emptying due to a tiltable work ˠˠSeparator
tank ˠˠVarious opportunities for water treat-
ˠˠCompact device including base frame ment (e.g. paper filter)
and manual separation
(ASM 18) Delivery contents
ˠˠTimer
ASM 60
ˠˠDosing pump
ˠˠManual sorting sieve (ASM 18)
ˠˠController
ˠˠOperating instructions
RV 220-SL
Accessories on request.
Features Options
ˠˠSimple emptying via an outlet at the ˠˠGrinding and polishing media for indi-
side of the machine vidual application
ˠˠWith timer ˠˠAdditive (compounds)
ˠˠSturdy, long-life construction with ˠˠPneumatic noise protection cover
plastic-coated steel trough ˠˠSeparation flap, optionally manual or
ˠˠIntegrated separation automatic
ˠˠEase of operation and maintenance ˠˠCircular dryer
ˠˠWorkpiece slide
Delivery contents ˠˠVarious perforated screens for inte-
grated separation
ˠˠSpeed regulation ˠˠVarious opportunities for water treat-
ˠˠDosing pump ment
ˠˠPerforated screen
ˠˠController
ˠˠOperating instructions
RT 200
Accessories on request.
Features Options
MZ 35 | MZ 90
Centrifuge
The centrifuge is a compact, space-saving and individual
plant for the treatment of process water.
The dirt particles are separated with a 2 000-fold accelera-
tion of gravity (g) from the process water.
MZ 35
Accessories on request.
Features Options
UA 5
Power Engine
Whether grinding, polishing, brushing or deburring - the universal drive
engine UA 5 is used in all materials. A wide variety of tools makes the machi-
ne very flexible and indispensable in your production.
˭˭ Mobile drive machine for the ˠˠInfinitely variable speed regulation ˠˠExtended shaft
universal operation in the ˠˠEasy handling and operation ˠˠFlexible shaft
fabrication ˠˠSmooth running due to massive ˠˠKeyed chuck with mounting
˭˭ Grinding, polishing, brushing and
spindle bearing ˠˠGrinding belt wheel
deburring of all common
ˠˠMaintenance-free due to frequency ˠˠVarious grinding, polishing, brushing
converter and deburring tools for individual use
materials with only one machine
ˠˠUsable for commercially available
˭˭ Flexible and mobile operation grinding, polishing, brushing and
Delivery contents
with flexible shaft deburring tools
Technical data UA 5 •
Motor 0.75 kW | 600 – 4 000 rpm
Energy 400 V, 50-60 Hz
Dimensions (LxWxH) 600 × 350 × 420 mm
Weight 45 kg
No. 29531
60
The handy drill grinders are ideal for grinding HSS- and HM-spiral drills. Due
to the adjustable point angles from 90° to 140°, this model can be universally
used. Easy handling and their efficiency make these machines a real winner in EDG 1226
Stationary
EDG 213
˭˭ Grinding and top thinning of ˠˠGood handling thanks to easy and ˠˠDiamond grinding disk
HSS- and HM-spiral drills practical design
ˠˠTop thinning and regrinding of drills Delivery contents
by specially guided collet chucks
ˠˠWith back taper for perfect cut
ˠˠAllen key 4 mm
ˠˠUniverse adjustable point angle
ˠˠAllen key 5 mm (for EDG 213)
ˠˠDurable grinding disk
ˠˠAllen key 6 mm (for EDG 1226)
ˠˠSpring pin (for EDG 1226)
ˠˠCBN grinding disk
ˠˠCollet set
ˠˠTool holder
ˠˠOperating instructions
Neutrix
Electrode Grinding Machine
The Neutrix is a small, low-weight portable grinding machine.
The electrode needle is centrically grinded and in longitudinal direction.
The precision of tungsten electrodes is quite accurate.
A stand can be mounted for use on the bench.
Stationary
www.assfalg-metal.com
Assfalg GmbH
Reserve technical changes · 01.2019 · ASS_2019_001 · www.hela.com
Buchstraße 149
73525 Schwäbisch Gmünd
Germany
Tel +49 (0) 71 71 92 505-0
Fax +49 (0) 71 71 92 505-50