Академический Документы
Профессиональный Документы
Культура Документы
Unitors Combined Oil Test Kit contains all of the necessary equipment and
consumables for oil condition monitoring needs. The Test Kit comes complete with
tests for Water in Oil, Total Base Number (TBN), Salt, Insolubles and a Viscosity
comparison test.
Product information
Features
Water in oil test
TBN test, designed for testing lubricants with TBN up to 150
Insolubles test
Salt water determination test
Viscosity comparison test
All necessary reagents and consumables
Practical and clear instructions provide guidance and interpretations of test results for the complete range of tests
The test kit comes with reagents for 25 tests
Benefits
Specification
General
Documents
773154-Easy-Ship-Combined-Test-Kit-ver-II
Overview-773154-EasySHIP-Combined-Test-Kit
Before starting the test: make sure that the inside of the cell is clean and dry (pay particular attention to the seal).
Always start the test with the highest range selected, when in doubt about the approximate amount of water in your test oil.
Overpressure can occur if an oil sample is tested with a very high water content on the low range 0.02-1% (200-10000ppm). This can
cause permanent damage to the pressure sensor.
Always start your test with the highest range, when you are in doubt about the approximate amount of water in your test oil.
Overpressure can occur if you test an oil sample with a very high water content on the low range 0.02-1% (200-10000ppm). This can
cause permanent damage to the pressure sensor.
Performance data
Related products
Spares
632414 COMBINED REPLACEMENT CELL 632489 VISCOSITY STICK
Consumables
632406 TBN REAGENT PACK 773156 UNITOR EASYSHIP REAGENT PACK WATER