Академический Документы
Профессиональный Документы
Культура Документы
“Casa Central”
Alumnos:
Profesor:
Universidad de Palermo
Año 2008
SouthTech:Casa central 1
Acerca de SouthTech
SouthTech es una compañía multinacional de desarrollo de software. Con más
de 2.500 profesionales y 10 años de experiencia en el campo de la informática.
Desarrolló un videojuego llamado “Assasine 3” que se vende en los puntos de
venta de la empresa. Así misma desarrollo otros softwares.
Tiene una oficina Central en Microcentro, Capital Federal, una sede en la
Provincia de Córdoba, y otra en Mendoza. La oficina Central reporta y se
comunica regularmente con los headcuarters en Washington D.C., Estados
Unidos.
Servicios Adicionales
Consultoría de Negocios
Ayuda a sus clientes a progresar en cada área de negocio, desde la
planificación estratégica hasta las operaciones del día a día. Identifica junto a
ellos posibilidades para introducirse en nuevos mercados, aumentar sus
ingresos actuales y entregar sus productos y prestar sus servicios de forma más
efectiva y eficiente. Colabora para lograr innovación aprovechando las
oportunidades tecnológicas y de mercado, acercándo soluciones para resolver
sus obstáculos más críticos y complejos.
Outsourcing
El Outsourcing es una herramienta estratégica que permite a las organizaciones
optimizar sus procesos y costos, con fuerte orientación de servicio.
Los servicios de Outsourcing permiten a los clientes gestionar eficientemente
procesos relacionados con el mantenimiento de aplicaciones y de infraestructura
tecnológica, así como también otros procesos de negocio, como Finanzas y
Recursos Humanos.
Brinda tanto soluciones enfocadas a procesos como a tecnología. Estas
soluciones se agrupan en: Outsourcing de Procesos (BPO), Outsourcing de
Aplicaciones (AO), Outsourcing de Infraestructura (ITO) y las distintas
combinaciones que surgen de ellos (Bundled Outsourcing Services ó Servicios de Outsourcing
Combinados
Aplicaciones:
Plataforma de trabajo dentro y fuera de la empresa. Sharepoint Microsoft.
Sistema ERP Microsoft Dynamics, que contiene módulos interoperables para los
departamentos de CRM, Compresa, Ventas, Marketing, Finanzas, Recursos
Humanos, Sistemas, Administración y Gerencia.
Servidores: File Server, Web Server, Mail Server, DCHP Server, DNS Server,
Servidos de aplicaciones, servidor de juegos.
SouthTech:Casa central 2
Componentes de la red
Switch Capa 3
Granja de
Servidores
Capa de Distribución
Switch de capa 3
Switch de capa 3
Capa de Acceso
SouthTech:Casa central 3
Cisco ha definido un modelo jerárquico conocido como el modelo jerárquico de la
interred. Este modelo simplifica la tarea de construir un confiable, red interna
jerárquica escalable, y menos costosa porque más bien que de centrarse en la
construcción del paquete, se centra en las tres áreas funcionales, o capas, de tu red:
Capa Core: Esta capa se considera la espina dorsal de la red e incluye los
interruptores high-end y los cables de alta velocidad tales como cables de la fibra.
Esta capa de la red no encamina tráfico en la LAN. Además, no se hace ninguna
manipulación del paquete por los dispositivos en esta capa. Algo, esta capa se refiere
a velocidad y asegura la entrega confiable de paquetes.
Capa de acceso: Esta capa incluye cubos y los interruptores. Esta capa también se
llama la capa de escritorio porque se centra en nodos del cliente que conectan, tales
como sitios de trabajo a la red. Esta capa se asegura de que los paquetes estén
entregados a las computadoras del usuario final.
OBJETIVO
DESCRIPCION
SouthTech:Casa central 4
actualizada a equipos considerados en obsolescencia técnica, adquiridos en el año
2000 y no soportados actualmente por los fabricantes originales, asegurando un
servicio óptimo y oportuno.
ALCANCE DE LA OBRA
PLANTA BAJA 14
PRIMER PISO 22
SEGUNDO PISO 26
TERCER PISO 15
PRIMER PISO
4 Compras
3 Ventas
SouthTech:Casa central 5
7 Marketing
SEGUNDO PISO
4 RRHH
3 Finanzas
7 Sistemas
TERCER PISO
2 Legales
2 Administración
4 Gerencia
REQUERIMIENTOS ESPECIFICOS
Descripción Cantidad de
unidades
PLANTA BAJA - UNID PUNTOS DE UTP CAT 6
- PATCHCORDS DE UTP CAT 6
- FACE PLATE CAT 6 CON JACK
- CANALETAS DECORATIVAS 32X25 14
- MEDICIONES Y CERTIFICACIONES DE UTP
BACKBONE
ESPECIFICACIONES DE COMPONENTES
SouthTech:Casa central 6
componentes instalados. Asimismo se exigirá que todas las ofertas presentadas
vengan
acompañadas de una carta emitida por el fabricante en donde se avale el respaldo del
mismo a la empresa oferente y se asuma un compromiso por la garantía.
Salidas de Telecomunicaciones
Todas las salidas de telecomunicaciones diseñadas para la terminación de cable de
par trenzado
balanceado de cuatro (4) pares deben poseer como mínimo las siguientes
características:
• Cable de Categoría 6.
• Cable de cobre de par trenzado de 4 pares 0.58mm (23AWG), del tipo UTP.
SouthTech:Casa central 7
•El grado de seguridad,
•La especificación o norma de fabricación.
REQUISITOS DE LA INDUSTRIA
EN Series
SouthTech:Casa central 8
INSTALACIÓN
Desmontaje de cables
Accesorios
El sistema de cableado deberá incluir los accesorios de montaje y manejo de cables,
de acuerdo a la norma de referencia. Deberá incluir como mínimo, organizadores
horizontales de 1U y 2U y organizadores verticales. Cables de amarra plásticos y
cintas tipo velcro, se deberán utilizar para ordenamiento y sujeción de cables
horizontales y de patch.
Material de conducción
•El material de conducción sobre el cielo falso debe ser metálico, no se aceptarán
cables desnudos.
• En los recorridos principales se debe utilizar canaleta metálica tipo escalerilla.Esta
canaleta debe estar soportada con pernos y tener soportes regulables roscados.
Todas las curvas deben ser suaves y los bordes deben ser protegidos para evitar
daños al cable
• En los recorridos secundarios (desde la canaleta hasta la bajante) se debe usar
tubería EMT. Se deben usar todos los accesorios del caso (uniones, conectores,
cajas de paso, abrazaderas).
•Toda la ductería metálica debe estar aterrizada.
• En las bajantes desde el cielo falso hasta el puesto de trabajo se debe usar canaleta
plástica decorativa (debe incluir accesorios) para evitar cables vistos. La canaleta
plástica debe estar dimensionada para un crecimiento del 30% (se verificará en obra).
PRUEBAS
Se deben efectuar pruebas de todos los canales y enlaces nuevos de cable antes de
la puesta en marcha del sistema. Se Deberá utiliza las normas TIA/EIA TSB –67
@ 100MHZ @ 250MHZ
Observaciones
Parámetros
Categoría 6
SouthTech:Casa central 9
Mínimo
Insertion loss
20.3 dB
33.7 dB
A menor valor mejor rendimiento
NEXT Loss
42.1 dB
36.1 dB
A mayor valor mejor rendimiento
PS NEXT Loss
40.6 dB
34.6 dB
A mayor valor mejor rendimiento
ACR*
(Informativo)
21.8 dB
2.4 dB
A mayor valor mejor rendimiento
PS ACR*
(Informativo)
20.3 dB
0.9 dB
A mayor valor mejor rendimiento
ELFEXT
23.9 dB
15.9 dB
A mayor valor mejor rendimiento
PS ELFEXT
20.9 dB
12.9 dB
A mayor valor mejor rendimiento
Return Loss
14 dB
10 dB
Pruebas de Switch
El oferente deberá realizar las pruebas necesarias con los técnicos del ISSFA
para verificar el correcto funcionamiento de los equipos y elementos instalados.
SouthTech:Casa central 10
ROTULADO
Los cables Horizontales y Vertebrales deben rotularse en cada extremo.
El cable o su etiqueta se marcará con su identificador.
Cada placa frontal debe rotularse con un identificador único.
Cada puerto de la placa frontal debe marcarse con su identificador.
Cada pieza de hardware de conexión debe rotularse con un identificador único.
Cada posición de hardware de conexión debe marcarse con su identificador.
REPORTES
• Todos los reportes deben generarse a partir del programa de computadora usado
para crear los registros. Se debe incluir al menos:
• Reportes de cable
• Reportes de distribuidores
• Reportes de hardware de conexión
SouthTech:Casa central 11
Diagrama de planta
PLANTA BAJA
SouthTech:Casa central 12
PRIMER PISO
Sala de
Redes
Up
Ventas
Marketing
Compras
SouthTech:Casa central 13
SEGUNDO PISO
Sala de
Redes
Up
R.R.H.H
Sistemas
Finanzas
SouthTech:Casa central 14
TERCER PISO
Sala de
Redes
Up
Gerencia
Administración
Legales
Direccionamiento IP
SouthTech:Casa central 15
Segundo Piso (45 hosts)
El departamento de Sistemas cuenta con 15 hosts
El departamento de Finanzas cuenta con 15 hosts
El departamento de Recursos Humanos cuenta con 15 hosts
3 switchs de 24 puertos cada uno.
Direcciones IP a utilizar
Por ser una red interna utilizaremos la red correspondiente de tipo C, por lo cual
usaremos las direcciones ip correspondientes a la red 192.168.0.0 que
corresponden para uso privado.
Router Interfaz interna 192.168.1.1
Switch multicapa layer 3 PB1 192.168.6.2 Default gateway 192.168.1.1
Para los servidores utilizaremos las siguientes direcciones siguientes direcciones:
Resumen de rutas
Subred utilizada 192.168.1.0
Subred utilizada 192.168.2.0 (Planta Baja)
Subred utilizada 192.168.3.0 (Primer Piso)
Subred utilizada 192.168.4.0 (Segundo Piso)
SouthTech:Casa central 16
Subred utilizada 192.168.5.0 (Tercer Piso)
Subred utilizada 192.168.6.0
Máscara de subred 255.255.255.0
Ruta resumida 192.168.0.0/21
SouthTech:Casa central 17
RouterA(config-if)# no shutdown
RouterA(config-if)# exit
RouterA(config)#router eigrp 100
RouterA(config-router)#network 192.168.1.0
RouterA(config-router)#network 200.232.1.0
RouterA(config-router)#exit
RouterA(config)#exit
RouterA#config terminal
RouterA(config)#configure terminal
RouterA(config)#ip nat pool dir_Publicas 200.200.100.129 200.200.100.250
netmask 255.255.255.128
RouterA(config)# ip nat inside source list 1 pool dir_Publicas
NAT
RouterA#configure terminal
RouterA(config)#inte e0
RouterA(config- if)#ip nat inside
RouterA(config- if)#int s0
RouterA(config- if)#ip nat outside
RouterA#copy run start
RouterA#exit
RouterA>
Switch(config)#
Switch(config)#hostname SwitchPB3
SwitchPB3(config)#enable secret capital
SwitchPB3(config)#ip default gateway 192.168.1.2
SwitchPB3(config)#ip address 192.168.2.2 255.255.255.0
SwitchPB3(config)#int f aO/1
SwitchPB3(config-if)#duplex full
SwitchPB3(config-if)#no shutdown
SwitchPB3(config-if)#exit
.
.
SouthTech:Casa central 19
.
SwitchPB3(config)#int f aO/24
SwitchPB3(config-if)#duplex full
SwitchPB3(config-if)#no shutdown
SwitchPB3(config-if)#exit
SwitchPB3(config)#int giO/26
SwitchPB3(config-if)#no shutdown
SwitchPB3(config-if)#exit
SwitchPB3(config)#int giO/27
SwitchPB3(config-if)#no shutdown
SwitchPB3(config-if)#exit
SwitchPB3(config)#exit
SwitchPB3#copy run start
SwitchPB3#exit
SwitchPB3>
SwitchPP1 192.168.3.1 – PRIMER PÌSO 1
Switch>
Switch>enable
Switch#
Switch#config t
Switch(config)#
Switch(config)#hostname SwitchPP1
SwitchPP1(config)#enable secret capital
SwitchPP1(config)#ip default gateway 192.168.1.2
SwitchPP1(config)#ip address 192.168.3.1 255.255.255.0
SwitchPP1(config)#int f aO/1
SwitchPP1(config-if)#duplex full
SwitchPP1(config-if)#no shutdown
SwitchPP1(config-if)#exit
.
.
.
SwitchPP1(config)#int f aO/24
SwitchPP1(config-if)#duplex full
SwitchPP1(config-if)#no shutdown
SwitchPP1(config-if)#exit
SwitchPP1(config)#int giO/26
SwitchPP1(config-if)#no shutdown
SwitchPP1(config-if)#no shutdown
SwitchPP1(config-if)#exit
SwitchPP1(config)#int giO/27
SwitchPP1(config-if)#no shutdown
SwitchPP1(config-if)#exit
SwitchPP1(config)#exit
SwitchPP1#copy run start
SwitchPP1#exit
SwitchPP1>
Switch>
Switch>enable
Switch#
Switch#config t
SouthTech:Casa central 20
Switch(config)#
Switch(config)#hostname SwitchPP2
SwitchPP2(config)#enable secret capital
SwitchPP2(config)#ip default gateway 192.168.1.2
SwitchPP2(config)#ip address 192.168.3.2 255.255.255.0
SwitchPP2(config)#int f aO/1
SwitchPP2(config-if)#duplex full
SwitchPP2(config-if)#no shutdown
SwitchPP2(config-if)#exit
.
.
.
SwitchPP2(config)#int f aO/24
SwitchPP2(config-if)#duplex full
SwitchPP2(config-if)#no shutdown
SwitchPP2(config-if)#exit
SwitchPP2(config)#int giO/26
SwitchPP2(config-if)#no shutdown
SwitchPP2(config-if)#exit
SwitchPP2(config)#int giO/27
SwitchPP2(config-if)#no shutdown
SwitchPP2(config-if)#exit
SwitchPP2(config)#exit
SwitchPP2#copy run start
SwitchPP2#exit
SwitchPP2>
SwitchPP3 192.168.3.3 – PRIMER PISO 3
Switch>
Switch>enable
Switch#
Switch#config t
Switch(config)#
Switch(config)#hostname SwitchPP3
SwitchPP3(config)#enable secret capital
SwitchPP3(config)#ip default gateway 192.168.1.2
SwitchPP3(config)#ip address 192.168.3.3 255.255.255.0
SwitchPP3(config)#int f aO/1
SwitchPP3(config-if)#duplex full
SwitchPP3(config-if)#no shutdown
SwitchPP3(config-if)#exit
.
.
.
SwitchPP3(config)#int f aO/24
SwitchPP3(config-if)#duplex full
SwitchPP3(config-if)#no shutdown
SwitchPP3(config-if)#exit
SwitchPP3(config)#int giO/26
SwitchPP3(config-if)#no shutdown
SwitchPP3(config-if)#exit
SwitchPP3(config)#int giO/27
SwitchPP3(config-if)#no shutdown
SouthTech:Casa central 21
SwitchPP3(config-if)#exit
SwitchPP3(config)#exit
SwitchPP3#copy run start
SwitchPP3#exit
SwitchPP3>
Switch>
Switch>enable
Switch#
Switch#config t
Switch(config)#
Switch(config)#hostname SwitchSP1
SwitchSP1(config)#enable secret capital
SwitchSP1(config)#ip default gateway 192.168.1.2
SwitchSP1(config)#ip address 192.168.4.1 255.255.255.0
SwitchSP1(config)#int f aO/1
SwitchSP1(config-if)#duplex full
SwitchSP1(config-if)#no shutdown
SwitchSP1(config-if)#exit
.
.
Laboratorio V Diseño Integral de una Red Empresarial
43
.
SwitchSP1(config)#int f aO/24
SwitchSP1(config-if)#duplex full
SwitchSP1(config-if)#no shutdown
SwitchSP1(config-if)#exit
SwitchSP1(config)#int giO/26
SwitchSP1(config-if)#no shutdown
SwitchSP1(config-if)#exit
SwitchSP1(config)#int giO/27
SwitchSP1(config-if)#no shutdown
SwitchSP1(config-if)#exit
SwitchSP1(config)#exit
SwitchSP1#copy run start
SwitchSP1#exit
SwitchSP1>
SwitchSP2 192.168.4.2 – SEGUNDO PISO 2
Switch>
Switch>enable
Switch#
Switch#config t
Switch(config)#
Switch(config)#hostname SwitchSP2
SwitchSP2(config)#enable secret capital
SwitchSP2(config)#ip default gateway 192.168.1.2
SwitchSP2(config)#ip address 192.168.4.2 255.255.255.0
SwitchSP2(config)#int f aO/1
SwitchSP2(config-if)#duplex full
SwitchSP2(config-if)#no shutdown
SwitchSP2(config-if)#exit
SouthTech:Casa central 22
.
.
.
SwitchSP2(config)#int f aO/24
SwitchSP2(config-if)#duplex full
SwitchSP2(config-if)#no shutdown
SwitchSP2(config-if)#exit
SwitchSP2(config)#int giO/26
SwitchSP2(config-if)#no shutdown
SwitchSP2(config-if)#exit
SwitchSP2(config)#int giO/27
SwitchSP2(config-if)#no shutdown
SwitchSP2(config-if)#exit
SwitchSP2(config)#exit
SwitchSP2#copy run start
SwitchSP2#exit
SwitchSP2>
SwitchTP1 192.168.5.1 – TERCER PISO 1
Switch>
Switch>enable
Switch#
Switch#config t
Switch(config)#
Switch(config)#hostname SwitchTP1
SwitchTP1(config)#enable secret capital
SwitchTP1(config)#ip default gateway 192.168.1.2
SwitchTP1(config)#ip address 192.168.5.1 255.255.255.0
SwitchTP1(config)#int f aO/1
SwitchTP1(config-if)#duplex full
SwitchTP1(config-if)#no shutdown
SwitchTP1(config-if)#exit
.
.
.
SwitchTP1(config)#int f aO/24
SwitchTP1(config-if)#duplex full
SwitchTP1(config-if)#no shutdown
SwitchTP1(config-if)#exit
SwitchTP1(config)#int giO/26
SwitchTP1(config-if)#no shutdown
SwitchTP1(config-if)#exit
SwitchTP1(config)#int giO/27
SwitchTP1(config-if)#no shutdown
SwitchTP1(config-if)#exit
SwitchTP1(config)#exit
SwitchTP1#copy run start
SwitchTP1#exit
SwitchTP1>
SwitchTP2 192.168.5.2 – TERCER PISO 2
Switch>
Switch>enable
Switch#
SouthTech:Casa central 23
Switch#config t
Switch(config)#
Switch(config)#hostname SwitchTP2
SwitchTP2(config)#enable secret capital
SwitchTP2(corfig)#ip default gateway 192.168.1.2
SwitchTP2(config)#ip address 192.168.5.2 255.255.255.0
SwitchTP2(config)#int f aO/1
SwitchTP2(config-if)#duplex full
SwitchTP2(config-if)#exit
.
.
.
SwitchTP2(config)#int f aO/24
SwitchTP2(config-if)#duplex full
SwitchTP2(config-if)#no shutdown
SwitchTP2(config-if)#exit
SwitchTP2(config)#int giO/26
SwitchTP2(config-if)#no shutdown
SwitchTP2(config-if)#no shutdown
SwitchTP2(config-if)#exit
SwitchTP2(config)#int giO/27
SwitchTP2(config-if)#no shutdown
SwitchTP2(config-if)#exit
SwitchTP2(config)#exit
SwitchTP2#copy run start
SwitchTP2#exit
SwitchTP2>
SwitchPP1>
SwitchPP1>ena
SwitchPP1#
SwitchPP1#config t
SwitchPP1(config)#
SwitchPP1(config)#vlan 5 name crm
SwitchPP1(config)#int fa0/1
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/2
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/3
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/4
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SouthTech:Casa central 28
SwitchPP1(config)int fa0/5
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#inti fa0/6
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/7
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/8
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/9
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/10
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/11
SwitchPP1(conf¡g-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#\nt fa0/12
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/13
SwitchPP1(config-¡f)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/14
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/15
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/16
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/17
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/18
SwitchPP1(config-if)# vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/19
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/20
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/21
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/22
SouthTech:Casa central 29
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/23
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int fa0/24
SwitchPP1(config-if)#vlan-membership static 5
SwitchPP1(config-if)#exit
SwitchPP1(config)#int gi0/26
SwitchPP1(config-if)#trunk on
SwitchPP1(config-if)#exit
SwitchPP1(config-if)#int gi 0/27
SwitchPP1(config-if)#trunk on
SwitchPP1(config-if)#exit
SwitchPP1(config)#vtp transparent
SwitchPP1(config)#vtp domain capital
SwitchPP1(config)#spanning-tree vlan 5
SwitchPP1(config)#exit
SwitchPP1#copy run start
SwitchPP1#exit
SwitchPP1>
SwitchPP2>
SwitchPP2>ena
SwitchPP2#
SwitchPP2#config t
SwitchPP2(config)#
SwitchPP2(config)#vlan 5 name crm
SwitchPP2(config)#vlan 6 name ventas
SwitchPP2(config)#int fa0/1
SwitchPP2(config-if)#vlan-membership static 5
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/2
SwitchPP2(config-if)#vlan-membership static 5
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/3
SwitchPP2(config-if)#vlan-membership static 5
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/4
SwitchPP2(config-if)#vlan-membership static 5
SwitchPP2(config-if)#exit
SwitchPP2(config)int fa0/5
SwitchPP2(config-if)#vlan-membership static 5
SwitchPP2(config-if)#exit
SwitchPP2(config)#inti fa0/6
SwitchPP2(config-if)#vlan-membership static 5
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/7
SwitchPP2(config-if)#vlan-membership static 5
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/8
SwitchPP2(config-if)#vlan-membership static 5
SouthTech:Casa central 30
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/9
SwitchPP2(config-if)#vlan-membership static 5
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/10
SwitchPP2(config-if)#vlan-membership static 5
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/11
SwitchPP2(conf¡g-if)#vlan-membership static 5
SwitchPP2(config-if)#exit
SwitchPP2(config)#\nt fa0/12
SwitchPP2(config-if)#vlan-membership static 5
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/13
SwitchPP2(config-¡f)#vlan-membership static 6
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/14
SwitchPP2(config-if)#vlan-membership static 6
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/15
SwitchPP2(config-if)#vlan-membership static 6
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/16
SwitchPP2(config-if)#vlan-membership static 6
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/17
SwitchPP2(config-if)#vlan-membership static 6
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/18
SwitchPP2(config-if)# vlan-membership static 6
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/19
SwitchPP2(config-if)#vlan-membership static 6
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/20
SwitchPP2(config-if)#vlan-membership static 6
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/21
SwitchPP2(config-if)#vlan-membership static 6
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/22
SwitchPP2(config-if)#vlan-membership static 6
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/23
SwitchPP2(config-if)#vlan-membership static 6
SwitchPP2(config-if)#exit
SwitchPP2(config)#int fa0/24
SwitchPP2(config-if)#vlan-membership static 6
SwitchPP2(config-if)#exit
SwitchPP2(config)#int gi0/26
SwitchPP2(config-if)#trunk on
SwitchPP2(config-if)#exit
SouthTech:Casa central 31
SwitchPP2(config-if)#int gi 0/27
SwitchPP2(config-if)#trunk on
SwitchPP2(config-if)#exit
SwitchPP2(config)#vtp client
SwitchPP2(config)#vtp domain capital
SwitchPP2(config)#spanning-tree vlan 5
SwitchPP2(config)#spanning-tree vlan 6
SwitchPP2(config)#exit
SwitchPP2#copy run start
SwitchPP2#exit
SwitchPP2>
SwitchPP3 192.168.3.3 – PRIMER PÌSO 3
SwitchPP3>
SwitchPP3>ena
SwitchPP3#
SwitchPP3#config t
SwitchPP3(config)#
SwitchPP3(config)#vlan 6 name ventas
SwitchPP3(config)#int fa0/1
SwitchPP3(config-if)#vlan-membership static 6
SwitchPP3(config-if)#exit
SwitchPP3(config)#int fa0/2
SwitchPP3(config-if)#vlan-membership static 6
SwitchPP3(config-if)#exit
SwitchPP3(config)#int fa0/3
SwitchPP3(config-if)#vlan-membership static 6
SwitchPP3(config-if)#exit
SwitchPP3(config)#int fa0/4
SwitchPP3(config-if)#vlan-membership static 6
SwitchPP3(config-if)#exit
SwitchPP3(config)#int gi0/26
SwitchPP3(config-if)#trunk on
SwitchPP3(config-if)#exit
SwitchPP3(config-if)#int gi 0/27
SwitchPP3(config-if)#trunk on
SwitchPP3(config-if)#exit
SwitchPP1(config)#vtp client
SwitchPP1(config)#vtp domain capital
SwitchPP3(config)#spanning-tree vlan 6
SwitchPP3(config)#exit
SwitchPP3#copy run start
SwitchPP3#exit
SwitchPP3>
SwitchTP1>
SwitchTP1>ena
SwitchTP1#
SwitchTP1#config t
SwitchTP1(config)#
SwitchTP1(config)#vlan 11 name sistemas
SwitchTP1(config)#vlan 12 name administracion
SwitchTP1(config)#int fa0/1
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/2
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/3
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/4
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)int fa0/5
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#inti fa0/6
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/7
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/8
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/9
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/10
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/11
SwitchTP1(conf¡g-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#\nt fa0/12
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/13
SwitchTP1(config-¡f)#vlan-membership static 11
SwitchTP1(config-if)#exit
SouthTech:Casa central 36
SwitchTP1(config)#int fa0/14
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/15
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/16
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/17
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/18
SwitchTP1(config-if)# vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/19
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/20
SwitchTP1(config-if)#vlan-membership static 11
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/21
SwitchTP1(config-if)#vlan-membership static 12
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/22
SwitchTP1(config-if)#vlan-membership static 12
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/23
SwitchTP1(config-if)#vlan-membership static 12
SwitchTP1(config-if)#exit
SwitchTP1(config)#int fa0/24
SwitchTP1(config-if)#vlan-membership static 12
SwitchTP1(config-if)#exit
SwitchTP1(config)#int gi0/26
SwitchTP1(config-if)#trunk on
SwitchTP1(config-if)#exit
SwitchTP1(config-if)#int gi 0/27
SwitchTP1(config-if)#trunk on
SwitchTP1(config-if)#exit
SwitchTP1(config)#vtp transparent
SwitchTP1(config)#vtp domain capital
SwitchTP1(config)#spanning-tree vlan 11
SwitchTP1(config)#spanning-tree vlan 12
SwitchTP1(config)#exit
SwitchTP1#copy run start
SwitchTP1#exit
SwitchTP1>
SwitchTP2 192.168.5.2 – TERCER PISO 2
SwitchTP2>
SwitchTP2>ena
SwitchTP2#
SwitchTP2#config t
SouthTech:Casa central 37
SwitchTP2(config)#
SwitchTP2(config)#vlan 12 name administracion
SwitchTP2(config)#vlan 13 name gerencia
SwitchTP2(config)#vlan 14 name salareuniones
SwitchTP2(config)#int fa0/1
SwitchTP2(config-if)#vlan-membership static 12
SwitchTP2(config-if)#exit
SwitchTP2(config)#int fa0/2
SwitchTP2(config-if)#vlan-membership static 12
SwitchTP2(config-if)#exit
SwitchTP2(config)#int fa0/3
SwitchTP2(config-if)#vlan-membership static 12
SwitchTP2(config-if)#exit
SwitchTP2(config)#int fa0/4
SwitchTP2(config-if)#vlan-membership static 12
SwitchTP2(config-if)#exit
SwitchTP2(config)int fa0/5
SwitchTP2(config-if)#vlan-membership static 13
SwitchTP2(config-if)#exit
SwitchTP2(config)#inti fa0/6
SwitchTP2(config-if)#vlan-membership static 13
SwitchTP2(config-if)#exit
SwitchTP2(config)#int fa0/7
SwitchTP2(config-if)#vlan-membership static 13
SwitchTP2(config-if)#exit
SwitchTP2(config)#int fa0/8
SwitchTP2(config-if)#vlan-membership static 14
Laboratorio V Diseño Integral de una Red Empresarial
68
SwitchTP2(config-if)#exit
SwitchTP2(config)#int gi0/26
SwitchTP2(config-if)#trunk on
SwitchTP2(config-if)#exit
SwitchTP2(config-if)#int gi 0/27
SwitchTP2(config-if)#trunk on
SwitchTP2(config-if)#exit
SwitchPP1(config)#vtp client
SwitchPP1(config)#vtp domain capital
SwitchTP2(config)#spanning-tree vlan 12
SwitchTP2(config)#spanning-tree vlan 13
SwitchTP2(config)#spanning-tree vlan 14
SwitchTP2(config)#exit
SwitchTP2#copy run start
SwitchTP2#exit
SwitchTP2>
SouthTech:Casa central 38
SouthTech:Casa central 39
SouthTech:Casa central 40
Routers de la serie Cisco 3600
SouthTech:Casa central 41
EIGRP
Tabla de vecinos
Cada router EIGRP mantiene una tabla de vecinos que enumera a los routers
adyacentes. Esta tabla puede compararse con la base de datos de adyacencia
utilizada por OSPF. Existe una tabla de vecinos por cada protocolo que admite
EIGRP.
Tabla de topología
Tabla de encaminamiento
SouthTech:Casa central 42
La tabla de encaminamiento EIGRP contiene las mejores rutas hacia un destino.
Esta información se recupera de la tabla de topología. Los routers EIGRP
mantienen una tabla de encaminamiento por cada protocolo de red.
Distancia factible (FD): Ésta es la métrica calculada más baja hacia cada
destino. Por ejemplo, la distancia factible a 32.0.0.0 es 2195456. La distancia de
la ruta que está en la tabla de encaminamiento.
Origen de la ruta: Número de identificación del router que publicó esa ruta
en primer lugar. Este campo se llena sólo para las rutas que se aprenden de una
fuente externa a la red EIGRP. El rotulado de rutas puede resultar particularmente
útil con el encaminamiento basado en políticas. Por ejemplo, el origen de la ruta a
32.0.0.0 es 200.10.10.10.
Estado de ruta: El estado de una ruta. Una ruta se puede identificar como
pasiva, lo que significa que la ruta es estable y está lista para usar, o activa, lo
que significa que la ruta se encuentra en el proceso de recálculo por parte de
DUAL.
VLANS:
1) Farm Server
2) Sala de desarrollo Nivel 1
3) Sala de desarrollo Nivel 2
4) Recepción
5) Marketing
6) Ventas
7) Compras
8) Sistemas
9) Finanzas
10) Recursos Humanos
11) Legales
SouthTech:Casa central 43
12) Administración
13) Gerencia
SouthTech:Casa central 44
LABORATORIO V
Alumnos:
Profesor:
Universidad de Palermo
Año 2008
Contar con una red hoy en día dentro de una gran empresa o una PYME es
imprescindible ya que en reiteradas ocasiones surge la necesidad de compartir los
diversos recursos informáticos que se poseen entre los distintos sectores, al estar
conectados se puede acceder desde cualquier punto o puesto de trabajo ubicado en la
empresa.
La relación que logra la red entre plataformas de hardware, sistemas operativos y redes
de comunicación nos brinda nuevas soluciones tecnológicas (Voz sobre IP, por ejemplo).
Cabe mencionar que una red ayuda también a la economía de nuestra PYME, debido a
que ahorramos en recursos informáticos.
Cableado Estructurado
El objetivo fundamental es cubrir las necesidades de los usuarios durante la vida útil del
edificio sin necesidad de realizar más tendido de cables; el diseño de este sistema de
cableado debe caracterizarse por soportar diferentes productos y también a diferentes
proveedores, esto no es algo sencillo de lograr debido a que los diferentes recursos
poseen diferentes requerimientos (Por ejemplo, se usara cable UTP de categoría 6 ya que
la red a desarrollar sera de alta velocidad) de cableado, se debe tener en cuenta los
avances tecnológicos, o sea, el cableado debe poder ser escalable en la mayor medida
posible.
Cableado Vertical: Cableado de los distribuidores del piso al distribuidor del edificio.
Cableado Horizontal: Cableado desde el distribuidor de piso a los puestos de
usuario. Se deben tener algunos puntos en cuenta:
Normas Descripción
ANSI/TIA/EIA-568-B Cableado de Telecomunicaciones en Edificios
− TIA/EIA 568-B1 Requerimientos generales Comerciales.
− TIA/EIA 568-B2 Componentes de cableado
mediante par trenzado balanceado
− TIA/EIA 568-B3 Componentes de cableado,
Fibra óptica
ANSI/TIA/EIA-569-A Normas de Recorridos y Espacios de
Telecomunicaciones en Edificios Comerciales
(Cómo enrutar el cableado)
ANSI/TIA/EIA-570-A Normas de Infraestructura Residencial de
Telecomunicaciones
ANSI/TIA/EIA-606-A Normas de Administración de Infraestructura de
Telecomunicaciones en Edificios Comerciales
ANSI/TIA/EIA-607 Requerimientos para instalaciones de sistemas
de puesta a tierra de Telecomunicaciones en
Edificios Comerciales.
ANSI/TIA/EIA-758 Norma Cliente-Propietario de cableado de
Planta Externa de Telecomunicaciones.
1)Switch
A)Patch cord al patch panel
B)Patch panel
2)Cableado horizontal, la conexión se realiza desde el patch panel a las distintas bocas de
red de cada usuario.
C)Boca de red
D)Patch cord al puesto de trabajo
Breve descripción
Cada piso estará provisto de teléfonos IP, que funcionan con el protocolo SIP, todo el
edificio cuenta wifi.
Distribución de los usuarios por piso (Regional Córdoba)
En cada uno de los gráficos de los pisos anteriormente mostrados se ve en color rojo el
trazado del cableado horizontal, los cables (UTP categoría 6) estarán apoyados sobre
canaletas metálicas y bajaran a través de una canaleta decorativa al jack(boca de red).
En cada uno de los pisos se encontrara un gabinete que es por donde entrara los cables
(no se pasaran cables por el exterior) en ellos se alojaran los switch de capa 2 estos
gabinetes se encontraran cerrados teniendo acceso solo a ellos el área de informática
(encargados de la administración de la red).
Cada uno de los puestos de trabajo contara con un teléfono IP y en los casos de las
secretarias del directorio un teléfono IP de tipo ejecutivo.
Debe contar con una excelente ventilación por eso es recomendable la instalación
de equipos de aire acondicionado según las mediciones realizadas por los
técnicos, de esta forma se impedirá el recalentamiento de los equipos servidores
de la empresa.
Es recomendable contar con un equipo UPS, esta batería deberá cumplirá un papel
indispensable ante cualquier desperfecto eléctrico que pueda sufrir el edificio, al
UPS se conectaran todos los equipos del backbone. Se recuerda, que ante la falta
de suministro por parte de la red eléctrica en forma repentina, si los equipos no
cuentan con este resguardo se pueden ocasionar no solo perdida de datos, sino
también rupturas en los equipos.
El acceso a esta sala solo podrá hacerlo el personal autorizado del area de
informática.
Solo se admiten equipos directamente relacionados con los sistemas de
telecomunicaciones.
En su diseño se debe prever tanto para equipos actuales como para equipos a
implementar en el futuro
El tamaño mínimo recomendado es 14 m2.
25−2=32−2=30 Host, se utilizaran 5 bits para los host quedando entonces disponibles
3 bits para el subneteo (se recuerda que en clase c contamos con 8 bist para host),
entonces
Por lo que si tomamos como dirección de red 192.168.1.0/27, y teniendo en cuenta que el
salto entre cada subred es de 32( 25 , ya que para calcularlo debemos tomar los bits que
Bien como necesitamos 2 subredes para A) optamos por elegir entre las disponibles a la
192.168.1.32/27 destinada al departamento de atención al cliente o recepción y a la
192.168.1.64/27 para la Gerencia ubicada en el ultimo piso.
El desarrollo sera idéntico al del punto A, y dado que solo necesitamos 3 subredes mas
basándonos en el cuadro anterior seleccionamos las resaltadas en amarillo.
26−2=64−2=62 Host, se utilizaran 6 bits para los host quedando entonces disponibles
2 bits para el subneteo (se recuerda que en clase c contamos con 8 bist para host),
entonces
Por lo que si tomamos como dirección de red 192.168.1.0/26, y teniendo en cuenta que el
salto entre cada subred es de 64( 26 , ya que para calcularlo debemos tomar los bits que
se encuentran en 0 del ultimo octeto de la mascara). Las subredes disponibles seran:
Bien como necesitamos 1 subred optamos por elegir entre las disponibles a la
192.168.2.128/26 destinada al departamento de desarrollo.
RouterC(config)# int s0 Accedo para setear el serial 0, que se comunicara con casa
central
RouterC(config-if)#bandwidth kilobits Calculo la metrica para que coincida con la velocidad de la linea
de interfaz
RouterC(config-router)#exit Salgo
2 El puerto CTY:Es el que conocemos habitualmente como puerto consola. Es el que nos permite realizar la
configuración del dispositivo aún cuando no exista archivo de configuración y no haya ninguna información previa.
4 Los puertos VTY: Conjunto de puertos virtuales utilizados para la conexión vía telnet, SSH, http o https al dispositivo
para realizar administración in band. La mayoría de los dispositivos tienen al menos 5 puertos virtuales identificados
como vty 0 a 4
3 El puerto auxiliar: No todos los dispositivos están equipados con un puerto auxiliar, identificado como AUX. Este
puerto puede actuar como un puerto de respaldo al puerto consola
RouterC>
Configuración de un Switch
SwitchPB1(config-if)#duplex full
SwitchPB1(config-if)#no shutdown
SwitchPB1(config)#int f aO/24
SwitchPB1(config-if)#duplex full
SwitchPB1(config-if)#no shutdown
SwitchPB1(config-if)#exit
SwitchPB1(config)#int giO/26
SwitchPB1(config-if)#no shutdown
SwitchPB1(config-if)#exit
SwitchPB1(config)#int giO/27
SwitchPB1(config-if)#no shutdown
SwitchPB1(config-if)#exit
SwitchPB1#copy run start
SwitchPB2(config)#int f aO/24
SwitchPB2(config-if)#duplex full
SwitchPB2(config-if)#no shutdown
SwitchPB2(config-if)#exit
SwitchPB2(config)#int giO/26
SwitchPB2(config-if)#no shutdown
SwitchPB2(config-if)#exit
SwitchPB2(config)#int giO/27
SwitchPB2(config-if)#no shutdown
SwitchPB2(config-if)#exit
SwitchPB2(config)#exit
SwitchPB2#copy run start
SwitchPB2#exit
SwitchPB2>
Sigo creando las VLANs de acuerdo a cada switch, las configuraciones que se mestran es a nivel general,
para que no sea muy tedioso. Los siguientes seran los correspondientes a gerencia, desarrollo,
administracion, ventas e informatica; y a cada una de ellas le asignare de todos los que le correspondan un
puerto a modo de ejemplo.
Debido a que tenemos un total aproximadamente de 80 host me bastaran solamente 8 bits de host (
28=255 ) por lo tanto me alcanza y me sobra.
25−2=32−2=30 Host, se utilizaran 5 bits para los host quedando entonces disponibles 3 bits
para el subneteo (se recuerda que en clase c contamos con 8 bist para host), entonces
Por lo que si tomamos como dirección de red 192.169.1.0/27, y teniendo en cuenta que el salto
entre cada subred es de 32( 25 , ya que para calcularlo debemos tomar los bits que se encuentran en
0 del ultimo octeto de la mascara). Las subredes disponibles seran:
RouterB(config)# int s0 Accedo para setear el serial 0, que se comunicara con casa
central
RouterB(config-if)#bandwidth kilobits Calculo la metrica para que coincida con la velocidad de la linea
de interfaz
RouterB(config-router)#exit Salgo
5 El puerto CTY:Es el que conocemos habitualmente como puerto consola. Es el que nos permite realizar la
configuración del dispositivo aún cuando no exista archivo de configuración y no haya ninguna información previa.
7 Los puertos VTY: Conjunto de puertos virtuales utilizados para la conexión vía telnet, SSH, http o https al dispositivo
para realizar administración in band. La mayoría de los dispositivos tienen al menos 5 puertos virtuales identificados
como vty 0 a 4
6 El puerto auxiliar: No todos los dispositivos están equipados con un puerto auxiliar, identificado como AUX. Este
puerto puede actuar como un puerto de respaldo al puerto consola
RouterB>
Configuración de un Switch
SwitchPB1(config-if)#duplex full
SwitchPB1(config-if)#no shutdown
SwitchPB1(config)#int f aO/24
SwitchPB1(config-if)#duplex full
SwitchPB1(config-if)#no shutdown
SwitchPB1(config-if)#exit
SwitchPB1(config)#int giO/26
SwitchPB1(config-if)#no shutdown
SwitchPB1(config-if)#exit
SwitchPB1(config)#int giO/27
SwitchPB1(config-if)#no shutdown
SwitchPB1(config-if)#exit
SwitchPB1#copy run start
SwitchPB1#exit
SwitchPB1>
Switch>
Switch>enable
SwitchPB2(config)#int f aO/24
SwitchPB2(config-if)#duplex full
SwitchPB2(config-if)#no shutdown
SwitchPB2(config-if)#exit
SwitchPB2(config)#int giO/26
SwitchPB2(config-if)#no shutdown
SwitchPB2(config-if)#exit
SwitchPB2(config)#int giO/27
SwitchPB2(config-if)#no shutdown
SwitchPB2(config-if)#exit
SwitchPB2(config)#exit
SwitchPB2#copy run start
SwitchPB2#exit
SwitchPB2>
Sigo creando las VLANs de acuerdo a cada switch, las configuraciones que se mestran es a nivel general,
para que no sea muy tedioso. Los siguientes seran los correspondientes a gerencia, administracion, ventas
e informatica; y a cada una de ellas le asignare de todos los que le correspondan un puerto a modo de
ejemplo.
SWITCH PISO 3
SwitchP3#vlan database Accedo a la configuración de la vlan
SwitchP3(vlan)# vlan 2 name gerencia Establesco que la vlan 2 se llamara gerencia
SwitchP3(vlan)#exit salgo
“Tabla de componentes”
Alumnos:
Profesor:
Universidad de Palermo
Año 2008
Ítem Descripción
Ser ensamblados en fábrica y su transmisión haya sido probada al 100% con un analizador de redes grado laboratorio para un desempeño apropiado a
500 MHz.
Ser resistente a la corrosión por humedad, temperaturas extremas, y partículas contaminantes.
Incluir foil metálico entre pares en cada una de las puntas para optimizar el NEXT.
Cumplir o exceder el desempeño eléctrico de la norma ANSI/TIA/EIA-568-B.2-10.
deberán ser multifilares
Los patchcords para racks deberán ser de 3Ft. Y para el área de trabajo de 7Ft.
Los Patchcords hasta el puesto de trabajo seran de 1mts de largo
Distribución “Regional Córdoba”:
Planta baja:12
Patchcords Primero:12
Segundo:24
Tercero:34
Cuarto:24
Quinto: 10
Distribución “Regional Mendoza”:
Planta baja:9
Primero:6
Segundo:16
Tercero:5
(*)En la distribuciòn de los patchcords hay mayor cantidad que los puestos de trabajo existentes
Valor aprox. 48 puertos: U$S 86,20
Valor aprox. 24 puertos: U$S 40,20
Deben Cumplir con los estándares ANSI/EIA/TIA 568-B.2-1 y ISO/IEC 11801
Listos para Ethernet Gigabit de cobre 1000Base-T
Compatible con Cableado Cat 6
Deberán fijarse dentro de racks estándar de 19” y permitir la instalación de jacks modulares de 8 pines Categoría 6 de acuerdo con el
estándar de referencia.
Los paneles deberán ser independientes del medio (cobre o fibra)
Deberá utilizar tecnología que permita un diseño optimado de balance de pares y un ancho de banda utilizable de 250 MHz.
Patch Panels
Los paneles deben permitir la colocación de etiquetas de identificación de papel protegidas por una ventana transparente.
Los paneles deberán tener la administración del cable por el frente y por atrás
Deberán incluir integrado un elemento posterior de alivio de tensión tipo bandeja o soporte para los cables (la cual permita la llegada
perpendicular del cableado UTP al patch panel, sin curva de 90 grados).
Deberá tener un organizador posterior de cable.
En cada toma deberá poder elegirse cualquiera de los dos esquemas de alambrado T568A o T568B.
Opcionalmente los paneles deberán permitir el montaje de elementos de seguridad para evitar conexión errónea de servicios y/o de
elementos de seguridad para proteger la desconexión accidental de conexiones.
Distribución “Regional Córdoba”:
Ítem Descripción
Planta baja:1
Primero:3(aprox)
Segundo:1
Tercero:1
Cuarto:1
Quinto: 1
Distribución “Regional Mendoza”:
Planta baja:1
Primero:2(Aprox)
Segundo:1
Tercero:1
Valor. Aprox.: U$S2,3
El faceplate deberá tener espacio para las etiquetas de identificación protegidas por una ventana transparente.
Deberá de ser independiente de las aplicaciones, pero debe contar con espacio para la identificación visual del servicio por medio de
accesorios de codificación por color.
Deberá permitir la entrada del patch cord del área de trabajo con un ángulo no mayor que 35° (medido entre la perpendicular al piso y
el ángulo de entrada del cord cuando este montada sobre la pared) para proteger de la entrada de polvo y el excesivo esfuerzo.
Distribución “Regional Córdoba”:
Planta baja:12
Placas
Primero:15(Aprox)
Frontales
Segundo:24
(Face Plate)
Tercero:34
Cuarto:24
Quinto: 10
Distribución “Regional Mendoza”:
Planta baja:9
Primero:10(Aprox)
Segundo:16
Tercero:5
Cable UTP Valor aprox por bobina de 100mts:U$S94,59
Cat. 6 Deben estar conformados por cuatro pares de conductores.
Para optimización del NEXT deberá tener separador interno en cruz (cross filled) entre los cuatro pares.
El cable debe ser de construcción tubular en su apariencia externa (redondo). Dentro del cable, los pares deben estar separados entre sí
por una barrera física. Los conductores deben ser de cobre sólido calibre 24 AWG.
No se aceptarán cables con conductores pegados u otros métodos de ensamblaje que requieran herramientas especiales para su
terminación y con forro continuo, sin porosidades u otras imperfecciones.
Distribución “Regional Córdoba” (Cantidad de metros aprox):
Planta baja:35mts
Primero: 40mts. dado que es la sala de maquinas se agregan 10 mts extra de cableados entre componentes
Segundo:50mts
Ítem Descripción
Tercero:65mts
Cuarto:60mts
Quinto: 49mts
Distribución “Regional Mendoza”(Cantidad de metros):
Planta baja:28mts
Primero:35mts
Segundo:45mts
Tercero:38mts
Valor aprox. Pack de 25: U$S64
Deberán estar disponibles en diseño plano y en diseño angulado para minimizar el radio de curvatura del cordón del área de trabajo.
Deberá utilizar una tecnología que optimice el balance de pares y la respuesta lineal de diafonía hasta una frecuencia de 250 Mhz.
Deberá tener conectores frontales RJ45 con conexión posterior para cables calibre 22 a 26 AWG por desplazamiento de aislante con
aislamiento de los pares por cuadrante y un sistema que facilite el acomodo de los alambres individuales.
Preferible que tenga una tapa protectora para polvo, que prevenga el ingreso de contaminantes y que no sea necesario separarla por
completo de la toma al abrirla para permitir la conexión del patch cord.
Los jacks de los patch panels deberán ser independientes.
Distribución “Regional Córdoba”:
Tomas
Planta baja:12
Modulares
Primero:15(Aprox)
(Jacks) Segundo:24
Tercero:34
Cuarto:24
Quinto: 10
Distribución “Regional Mendoza”:
Planta baja:9
Primero:10(aprox)
Segundo:16
Tercero:5
Racks Valor. Aprox.: U$S 500 (aprox, al incluirle las puertas.)
Link de distintos modelos de racks: http://www.starcase.com/network_racks.htm
Alto : 122cms / Ancho : 48 cms
Estructura elaborada en tol de 2.00 mm
Perforaciones en verticales para montaje de equipos de 19”
Pasacables superior e inferior, paneles laterales con seguro de media vuelta.
Puerta frontal en tol perforado o vidrio y lámina en tol perforado para la parte posterior del rack
Incluidos: Piso, techo, verticales con perforaciones, organizadores verticales de patchcords y organizadores horizontales para todos los
patch panels y switches ofertados y un juego de niveladores
2 (dos) Multitomas eléctricas AC reguladas, 8 (ocho) puntos, voltaje 115-110 v AC, 19”, integradas al rack
Niveladores en todos los puntos de apoyo, anclaje antisísmico
Todos los Rack deben cumplir con normas internacionales, para garantizar las necesidades y exigencias modernas.
Ítem Descripción
Debe ser blindado
Pintado electrostáticamente al horno
Poseer tomas polarizadas y Ventilación
Distribución “Regional Córdoba”:
Planta baja:1
Primero:2
Segundo:1
Tercero:1
Cuarto:1
Quinto: 1
Distribución “Regional Mendoza”:
Planta baja:1
Primero:2
Segundo:1
Tercero:1
Cisco AS5300 Gateway. Valor aprox.: U$S 5122,00
Cordoba: Se necesita un gateway en la granja de servidores
Mendoza:Se necesita un gateway en la granja de servidores
Central: Se necesita un gateway en la granja de servidores
Sistema telefónico basado en protocolos de voz sobre IP para redes LAN/WAN
Capacidad de crecimiento en puertos (líneas troncales + extensiones).
Administración: Utilidad de administración
Conexiones de puerto LAN: Un puerto de uplink 10/100 redundante en el procesador de llamadas
Opciones de gateway PSTN: Inicio de bucle analógico, T1/PRI, E1/PRI,RDSI BRI-ST
Incluye:
CENTRAL
Correo de voz y operadora automática
TELEFONICA
Mensajeria unificada
DE VOZ
Administración y programación del sistema via browser
SOBRE IP
Programación de accesos y restricciones
Registro y reportes de consumo y utilización
Implementación de características de call center
Integración a la LAN/WAN
Soporte de líneas troncales analógicas
Crecimiento modular
Soporte de teléfonos IP y analógicos
Configurado para:
12 líneas troncales analógicas
Correo de voz con 4 puertos de operación simultánea
Ítem Descripción
• Modelo recomendado: Cisco Catalyst 2960 G48-TC-L 48 ports. Valor aprox: U$S2122,98
• Modelo recomendado: Cisco Catalyst 2960 G24-TC-L 24 ports. Valor aprox: U$S1579,00
• 48 puertos auto-negociables 10BASE-T/100BASE-TX / 1000 BASE-T, 802.3af in line power.
• Rendimiento Soporte al menos 150 Gbps switching capacity
• Capa 2
Switch de 48 o • Soporte direcciones MAC, Spanning Tree Protocol, IPv6 lista en hardware.
24 puertos • Clase de servicio/ Calidad de servicio (CoS/QoS)
1000Mbps. • IEEE 802.1X network login: EAP sobre LAN, MD5, PAP, CHAP, PEAP, filtrado de ACLs. RADIUS autenticación de usuarios de manejo del
POE switch sobre telnet y sesiones de consola
• Simple dirección IP y manejo de interfaces centralizado para control centralizado
• Traceroute, CIDR, DNS (cliente), SMTP, UDP, TFTP, IP, ICMP, TCP, ARP, TCP, IEEE 802.1d (Spanning Tree), IEEE 802.3ad (Static
Config), DHCP.
• CLI via consola o telnet, manejo de interface WEB embebido, configuración del sistema SNMP v1/v2/v3, Trivial FTP (TFTP), Secure
FTP (SFTP).
Switch de 24 • Modelo recomendado: Cisco Catalyst 3750 G24-TS-E 24 ports. Valor aprox: U$S7340
puertos. • 24 puertos auto-negociables 10BASE-T/100BASE-TX / 1000 BASE-T, 802.3af in line power.
Capa 3. • Rendimiento Soporte al menos 150 Gbps switching capacity
1000Mbps
• Modelo recomendado: Cisco IP Phone 7940G. Valor aprox.: U$S 216,37
• Soporte para alimentación mediante Ethernet (PoE)
• Códecs de voz
• G.711, G.722, G.729ab, ADPCM
• Calidad del servicio
• IEEE 802.1Q (VLAN), IEEE 802.1p, Type of Service, (ToS), IEEE 802.3
• Asignación de dirección IP, DHCP
Distribución “Regional Córdoba”:
Teléfonos para Planta baja:10
voz I.P. Primero:10
Segundo:20
Tercero:34
Cuarto:21
Quinto: 7
Distribución “Regional Mendoza”:
Planta baja:8
Primero:5
Segundo:12
Tercero:3
LABORATORIO V
Alumnos:
Profesor:
Universidad de Palermo
Año 2008
Asterisk
1
H.323 . Telefonos y Softphones conectan a un canal, algunos de ellos se
registran ( en el proyecto todos se registran ) para dar a conocer que estan en
linea. Los canales también registran conexiones salientes a otro servidor VoIP,
mediante SIP nos podemos conectar a la red Free World Dialup o a
proveedores SIP como Nufone , Vonage o Siphone.
Protocolo H.323
H.323 fue diseñado con un objetivo principal: Proveer a los usuarios con tele-
conferencias que tienen capacidades de voz, video y datos sobre redes de
conmutación de paquetes.
2
Cisco IP Phone 7940G.
GENERAL
TELEFONIA IP
3
VISUALIZADOR
DIVERSO
Ancho: 26.7 cm
Profundidad: 15.2 cm
Altura: 20.3 cm
Peso: 1.6 kg
4
HOJA DE DATOS
Información técnica
E L GATEWAY C ISCO AS5300/ VOZ ES UNA EXTENSIÓN NATURAL DE LA EXPERIENCIA DE C ISCO S YSTEMS EN
CONECTIVIDAD IP, TRANSMITE TRÁFICO DE VOZ Y DATOS DE ALTA CALIDAD A TRAVÉS DE UNA RED IP.
El Cisco AS5300 es un galardonado servidor de acceso remoto Ilustración 1 Gateway Cisco AS5300/voz con tarjeta de función de alta
densidad de voz/fax para VoIP; galardonada, de clase portadora y compatible
telefónico y un gateway de voz sobre IP (VoIP). Cuando está con H.323
equipado con tarjetas de función de voz (VFC) y el software Cisco
IOS® de activación por voz, el AS5300 admite VoIP de clase de
portadora y servicios de fax sobre IP.
El software Cisco IOS (Internetworking Operating System)
ofrece un potente conjunto de mecanismos de calidad de servicio
(QoS), tamaños de trama variables y controles H.323 basados en
los estándares, que ofrecen la mayor calidad de voz y el
enrutamiento mejor de control de llamadas para entregar servicios
mejorados del sector. Las pruebas de Mier Communications han
calificado las capacidades del gateway de voz sobre IP del
gateway Cisco AS5300/voz como las mejores en las áreas de
calidad de voz, latencia y requisitos de ancho de banda.
Además de ser compatible con H.323, el gateway Cisco
AS5300/voz admite una familia de CODEC de voz estándar en el
sector y ofrece cancelación de eco y detección de actividad de voz El gateway Cisco AS5300/voz es perfecto para una configuración
(VAD)/supresión de silencio. Ofrece una aplicación de respuesta apilada para crear un conjunto de acceso telefónico virtual en
de voz interactiva (IVR) integrada que incluye indicativos de voz aplicaciones de proveedores de servicios a gran escala. Por
y un conjunto de dígitos para autentificar al usuario e identificar ejemplo, el galardonado AccessPath™-VS3 es la solución apilada
el destino de las llamadas. Los usuarios pueden interconectarse preconfigurada y previamente probada de Cisco para VoIP. (para
con switches digitales de la red de teléfono conmutada pública obtener más información, véase la hoja de datos de AP-VS3). Al
(PSTN) o PBX, y con servidores de autenticación y facturación ofrecer la familia de productos compatibles más amplia del
RADIUS existentes. mercado, Cisco permite que los clientes elijan el punto de inicio
Las tarjetas de funciones de voz/fax del AS5300 son tarjetas apropiado para un proceso de “ampliación a medida” sin poner en
coprocesadoras con un potente motor Reduced Instructions Set compromiso las capacidades futuras.
Computer (RISC) y procesadores de señal digital (DSP)
dedicados de alto rendimiento para garantizar un predecible
procesamiento de voz en tiempo real. El diseño une este
coprocesador con el acceso directo al motor de enrutamiento del
gateway Cisco AS5300/voz para un sencillo envío de paquetes .
El gateway Cisco AS5300/voz puede aceptar dos tarjetas de
función de voz/fax, por lo que puede ampliarse hasta un máximo
de 96/120 conexiones de voz en un solo chasis.
Aplicaciones
AS5300 AS5300
Router Router
QoS WAN
V V
T1/E1
H.323
Gatekeeper
• ANI para autenticación y servicio de identificación del número Con este equipo de la figura 3, los SP pueden transportar tráfico
marcado (DNIS) para el enrutamiento de llamadas de voz sobre redes de paquetes y por consiguiente:
• Son necesarios el número de cuenta y la contraseña para la • Ofrecer nuevos servicios que van más allá del acceso básico a
autenticación Internet
• Salto de fax activo/desactivado: script que admite "fax • Ofrecer servicios de voz a precios muy competitivos mediante
redialers", que son pequeñas cajas conectadas entre una la utilización de su infraestructura de IP de bajo coste
máquina de fax y la línea telefónica; almacenan el número de • Expandir la base de clientes a millones de ellos
teléfono de destino marcado, llaman al gateway local y, • Aumentar los ingresos de las POP existentes
seguidamente, introducen el número de destino en respuesta a • Diferenciar por servicios integrados de voz y datos
las solicitudes de tono del fax; también pueden introducir un • Ofrecer servicios de voz y datos gestionados por el negocio
número de cuenta si fuera necesario.
VCO/4K VCO/4K
Service Mode AS5300 AS5300 Service Mode
PRI PRI
Router Router
V V
QoS WAN
V V
AAA
PSTN PSTN
STP
Class 5 Class 5
Servicios avanzados de larga distancia de los proveedores de están conectados) y una segunda línea virtual (capacidad de hacer
servicio y recibir llamadas de voz desde el PC del usuario mientras está
Los proveedores de servicios pueden mejorar aún más sus ofertas
conectado a Internet). Estos servicios pueden incrementar
de servicios de VoIP añadiendo un switch programable VCO/4K
considerablemente los flujos de ingresos que los SP de Internet
(Figura 4). El VCO/4K permite utilizar servicios de voz más
(ISP) obtienen de los suscriptores por el acceso a Internet.
avanzados, tales como mensajería de voz/fax, enrutamiento
inteligente de números 800, marcado activado por voz, tarjetas de Para ampliar su cobertura de servicios, cada ISP puede decidir
llamada, servicios del asistente personal y conferencias a través asociarse con ISP de otras áreas geográficas o formar un
de la Web. Además, puede integrarse de forma transparente en las consorcio para ofrece una mayor cobertura. Las firmas de
infraestructuras de telecomunicaciones existente con señalización establecimiento permiten a los ISP ofrecer una cobertura nacional
Signaling System 7 (SS7) controlada para conectarse a las redes mediante el intercambio de tráfico de voz con otros ISP. Cisco
públicas de todo el mundo. VCO/4K lleva a cabo la traducción de también ha introducido el soporte para el protocolo Open
SS7 ISUP y del Transaction capabilities application part (TCAP) Settlements Protocol, un estándar que se está desarrollando para
a PRI, con el fin de que los proveedores de servicios puedan facilitar el intercambio de tráfico de VoIP.
integrar un amplio abanico de capacidades del punto de
conmutación de servicios (SSP) en los switches VCO/4K nuevos
y existentes a una parte del coste de un switch de acceso en
tándem.
Con la red avanzada, los proveedores de servicios pueden
ofrecer mensajería unificada, espera de llamadas de Internet (que
avisa a los usuarios de las llamadas de voz entrantes mientras
Regional Office
PBX
Branch Office
PBX
PSTN
PSTN 2 to 12
Phone Analog Ports (calls)
V
2 to 4
Analog Ports (calls) Cisco 3640
Fax
V
Cisco 2611
PBX
1 to 4 T1/E1
IP
IP Cloud
Cloud Up to 96/120 calls
V
Cisco Voice Manager
Cisco AS5300
Headquarters
Llamadas telefónicas y faxes a través de intranets regional o a un teléfono conectado directamente a un Cisco 2600
empresariales. de la sucursal. Es posible que algunas oficinas pequeñas no
Una aplicación habitual para las nuevas tarjetas Cisco
necesiten todas las funciones de una centralita PBX, como en este
AS5300/Voice Gateway es la realización de llamadas telefónicas
caso, donde son suficientes el Cisco 3600 y 2600. Los productos
y el envío o recepción de faxes en intranets. Utilizando el Cisco
de telefonía de paquetes de Cisco enrutan de forma transparente
AS5300/Voice Gateway, junto con el Cisco 3600 y el 2600 con
llamadas o faxes a la red IP o a la red pública de telefonía
módulos de voz, las empresas pueden reducir considerablemente
dependiendo de los parámetros que establezca el administrador de
los costes de teléfono y fax a larga distancia mediante el
la red. El ahorro que supone instalar la solución de voz/fax de
enrutamiento del tráfico de voz y fax interno de la empresa a
cisco para gestionar las llamadas y faxes a través de la intranet
través de su red IP existente (véase la figura 5). En las intranets,
superará la inversión inicial en cuestión de meses.
los administradores pueden monitorizar y controlar los niveles de
servicio y, por consiguiente, lograr y mantener transmisiones de Tabla 1 Productos Cisco en telefonía de paquetes con gateways activos
voz y fax de calidad telefónica en sus redes de datos utilizando la
familia de productos de telefonía de paquetes con gateways Número de
puertos de Producto Cisco recomendado en telefonía
activados de Cisco. voz de paquetes con gateways activos
Dado que tanto el Cisco AS5300/Voice Gateway, así como el
Hasta 2.520 Interfaces T1/E1 digitales Cisco AccessPath VS3
Cisco 3600 y Cisco 2600, trabajan con equipos de teléfono y fax
estándar, las empresas pueden cambiar su tráfico de voz y fax Hasta 120 Interfaces T1/E1 digitales Cisco AS5300
entre oficinas de su red de voz a la red de datos sin necesidad de Hasta 12 Cisco 3600 analógico/ BRI
reconvertir a los usuarios. De forma transparente para el usuario,
Hasta 4 Cisco 2600 analógico/ BRI
un teléfono conectado a través de una PBX a un puerto de voz del
Cisco AS5300/Voice Gateway de las oficinas centrales puede
llamara a través de una conexión WAN a un teléfono conectado a
un sistema clave que esté conectado a un Cisco 3600 de la oficina
FXS T1/E1
IP Cloud
FXS
Cisco 3600
Cisco Voice Manager Information Base (MIB) generales y específicas de voz. Cisco
Cisco Voice Manager (CVM) es una aplicación de gestión de Voice Manager detecta automáticamente los productos con
redes basada en la Web que configura y monitoriza los gateways soporte para voz, cuenta con herramientas para resolver
de voz sobre IP (VoIP) de Cisco. Los administradores de red problemas de la red y proporciona información obligatoria del
pueden implementar planes de acceso telefónico, controlar los historial de llamadas. CVM es ideal para gestionar un máximo de
parámetros sobre la actividad y calidad de llamadas en tiempo 50 gateways en las aplicaciones de red empresariales o medias.
real, además de crear informes detallados que muestren el
historial de llamadas y la calidad de las mismas. El AS5300/Voice
Gateway ofrece un completo conjunto de variables de Simple
Network Management Protocol (SNMP) Management
Característica Ventaja
Interfaces digitales (T1/E1 PRI) Esta característica permite mayores densidades de puerto para aumentar la capacidad de ampliación.
Compatibilidad con H.323 Los gateway Cisco AS5300/Voice Gateway interoperan con aplicaciones de voz y videoconferencia compatibles con H.323, tales
como Microsoft NetMeeting, así como con gateways y gatekeepers compatibles con H.323.
DSP de alto rendimiento Los DSP de alto rendimiento (100 mips) tienen una gran cantidad de potencia para soportar todo la gama disponible de CODECS
de alta compresión/baja demora, incluyendo G.711.1, G.729, G.729a y G.723.1. Los DSP admiten plenamente la cancelación de
eco, la detección de actividad de voz, la supresión de silencio, el buffering de fluctuación de fase y la generación de ruido de
apaciguamiento para garantizar conversaciones uniformes con voz de alta calidad. Se ofrece cobertura total en todos los canales
de voz
Diseño con baja latencia El Cisco AS5300/Voice Gateway está diseñado para tener la latencia mínima, lo que es esencial para un tráfico de voz y fax de
alta calidad.
Transmisión de fax en tiempo real Esta característica permite la transmisión de faxes en tiempo real entre máquinas de fax del grupo III que funcionen a un máximo de
14.400 bps. La tarjeta de funciones de voz Cisco AS5300/Voice Gateway hace de interfaz entre las máquinas de fax origen y destino
fingiendo ser una máquina de fax. La transmisión de fax en tiempo real elimina los retrasos de las redes utilizando el spoofing T.30.
Las transmisiones de fax entrantes se desmodulan antes de la transmisión, a fin de que la llamada modulada por pulsos de 64 K
consuma solamente 9,6 Kbps o 14,4 Kbps de ancho de banda de la red de datos por cada segundo de transmisión del fax.
Interopera con los módulos de voz de Cisco ofrece una familia de soluciones escalables de voz de paquetes para las empresas. Cisco AS5300/Voice Gateway también
Cisco 3600 y Cisco 2600 interopera con otros gatekeepers.
Fragmentación e interleaving Multiclass Esta característica reduce los paquetes de datos grandes a otros de menor tamaño, evita que los paquetes de voz se atasquen
Multilink PPP detrás de paquetes grandes y reduce el periodo de latencia.
Cisco Voice Manager CVM es una aplicación de configuración, monitorización y creación de informes para las redes de telefonía por conmutación de
paquetes. Genera informes del historial de llamadas, informes de volumen de llamadas e informes de excepción de calidad de voz
utilizando la especificación ITU-T G.113 para calidad de voz. Esta aplicación Java se ejecuta en Windows NT o Solaris.
Diseño del coprocesador de alto Ésta es una solución en un solo dispositivo altamente integrada que minimiza la latencia de los paquetes, esencial para la
rendimiento transmisión voz de alta calidad. Las soluciones basadas en PC que utilizan componentes de fuentes diversas no pueden conseguir
las mismas características de rendimiento.
Arquitectura modular El sistema ofrece flexibilidad y protección de la inversión. El diseño modular del Cisco AS5300/Voice Gateway permite pasar de
24 a 120 conexiones de voz por dispositivo. Además, los módulos de módem y voz pueden utilizarse en el mismo AS5300, lo que
proporciona a los clientes más flexibilidad.
Compatible con los teléfonos, faxes, Esta característica proporciona un interfaz estándar con el equipo telefónico existente. Los usuarios siguen utilizando el equipo
centralitas y sistemas centrales que ya conocen sin que tengan que realizar ningún tipo de adaptación.
existentes
Característica Ventaja
Selección de CODECS en tiempo real Esta sofisticada arquitectura de DSP admite simultáneamente la negociación de la capacidad H.323 en todos los canales. La
tarjeta de función de voz del Cisco AS5300/Voice Gateway carga, sobre la marcha, el CODEC de voz o fax apropiado en los 120
canales, simultáneamente si fuera necesario.
Cancelación de eco E.165 Esta característica proporciona cancelación de eco en la red de circuitos conmutados con una cola de hasta 32 mseg., más que
suficiente para soportar la calidad de portadora.
Buffering de fluctuación de fase El búfer de fluctuación de fase adaptable equilibra de forma inteligente la pérdida y el retraso de paquetes a través del gateway
adaptable para que las llamadas tengan la máxima nitidez y calidad.
Detección de actividad de voz (supresión El ancho de banda de la red de paquetes sólo se usa cuando alguien está hablando. Durante los silencios (hasta un 50 del tiempo),
de silencio) el ancho de banda está disponible para el tráfico de datos.
Generación de ruido de apaciguamiento Para simular mejor las llamadas telefónicas sobre redes de voz, esta función tranquiliza al usuario ya que parece que la conexión
sigue abierta, incluso cuando no se produce ninguna conversación.
Estadísticas de calidad de voz Se suministran los parámetros de llamada para la recomendación ITU-T G.113 de cálculos de daños en la calidad de la
transmisión de voz. Dichos parámetros incluyen el tipo de CODEC, ancho de banda utilizado, retraso de extremo a extremo,
ruido del circuito, volumen, eco pérdida de paquetes y otras estadísticas.
Varios CODEC estándar ITU G.711, Estas tecnologías de compresión basadas en los estándares permiten una voz y compresión de alta calidad a simplemente 53 kbps
G.729, G.729a y G.723.1 y minimizan el ancho de banda necesario para transmitir la telefonía de paquetes.
Protocolo Compressed Real-Time Éstas son técnicas de compresión de cabeceras y de fragmentación de paquetes que permiten transmisiones de voz y fax de
Protocol (CRTP) y fragmentación e calidad telefónica en conexiones WAN de ancho de banda bajo.
intercalado Multilink PPP
Asignación del plan de conexión Esta característica implica la asignación de los números de teléfono marcados a direcciones IP. La asignación puede programarse
telefónica directamente en el Cisco AS5300/Voice Gateway o se puede mantener en los gatekeepers H.323 que se comunican con varios
gateways a través de mensajes H.323 RAS.
Expansión de números Esta característica permite realizar accesos telefónicos rápidos y simplifica la configuración del plan de accesos telefónicos.
Amplía todos los números que coinciden con un patrón definido, por lo que sólo hay que configurar y marcar los últimos dígitos
del número.
Marcación entrante directa La marcación entrante directa permite que los usuarios que tengan centralitas puedan realizar accesos telefónicos directos; no es
necesario marcar el número principal y, a continuación, una extensión. Esta característica es también útil en las aplicaciones de
los proveedores de servicios con un VCO/4K utilizado como nodo de servicio.
Tono de llamada telefónica secundario Esta característica permite el acceso explícito a una red VoIP para la implementación de llamadas en dos etapas. El primer tono
de marcado lo genera la compañía telefónica local, mientras que el segundo, también conocido como aviso, lo genera la
portadora VoIP.
Progreso de las llamadas y generación Esta característica genera tonos del progreso de las llamadas, que incluyen tonos de marcado, ocupado, llamada devuelta y
de tonos congestión, con las variantes locales de cada país.
Transporte multifrecuencia de tono dual Esta característica permite utilizar tonos de toque para las aplicaciones de correo de voz y sistemas IVR; también admite relay
(Dual Tone Multifrequency, DTMF) DMTF fuera de banda donde se utilizan CODEC de compresión alta, como G.723.1, que pueden dañar los tonos DTMF en
banda.
Autodetección de faxes Todos los puertos pueden aceptar una llamada para la transmisión de un fax; cuando se detecta una llamada de fax el puerto se
reconfigura automáticamente. Un diseño ampliable otorga al Cisco AS5300/Voice Gateway la capacidad exclusiva de recargar
simultáneamente todos los algoritmos de fax, cumpliendo con los estrictos requisitos de temporización de las máquinas de fax de
legado.
Codificación -law y A-law en todos los Esta característica facilita la realización de llamadas internacionales mediante la transcodificación transparente entre la
canales codificación de ley (utilizada en países con T1) y la ley A (utilizada en países con E1).
Límite de música en espera Esta característica ofrece música inteligente cuando se gestionan las llamadas en espera
Característica Ventaja
Importancia IP El campo Tipo de servicio (ToS) de un encabezado IP incluye tres bits de precedencia configurables. El tráfico de voz debe configurarse con una
precedencia de IP de 5. Esta capacidad permite a la red dar prioridad a los paquetes de voz sobre otro tráfico, con lo que se garantiza la mayor
calidad de voz sobre una red congestionada.
Mecanismos de gestión Los mecanismos de gestión de colas incluyen WFQ, gestión de colas de prioridad y gestión de colas personalizada. Éstas son capacidades
de colas configurables del software Cisco IOS que reservan el ancho de banda adecuado y priorizan el tráfico de voz y de fax para garantizar un alto nivel de
calidad.
CAR La función de tasa de acceso comprometido (Committed Access Rate, CAR) realiza la clasificación de paquetes y la gestión del ancho de banda.
Las funciones de clasificación de paquetes permiten a los usuarios clasificar el tráfico de la red en varios niveles de prioridad o clases de servicio
(CoS). El operador de la red puede definir hasta seis CoS usando los tres bits de precedencia del campo ToS de la cabecera de IP. El operador puede
usarlas otras funciones de QoS para asignar las normativas de manejo de tráfico adecuadas, que incluye la gestión de congestión, la asignación del
ancho de banda, y límites de retraso (delay bounds) para cada clase de tráfico.
WRED Las funciones de WRED (Weighted Random Early Detection) ofrecen a los operadores de la red unas potentes funciones de control de congestión
diseñadas para tratar de manera preferente el tráfico de primera clase bajo situaciones de congestión, al tiempo que se aprovecha al máximo la tasa
de transferencia y uso de la capacidad de la red y se reduce al mínimo la pérdida o el retraso de los paquetes.
RSVP RSVP permite al gateway de voz de Cisco solicitar o reservar el ancho de banda necesario para una llamada.
Memoria 4 MB DRAM
Memoria Flash 8 MB
Especificaciones estándar
Tipo de procesador R4700 a 150 MHz
Memoria 64 MB DRAM
Memoria Flash 16 MB de memoria Flash de sistema, en uno o dos bancos, hasta 16 MB de memoria Flash de inicio
Modems de 56K Un máximo de 48 (T1) ó 60 (E1) modems cuando se instalan 48 (T1) ó 60 (E1) puertos de voz
Otros componentes estándar Fuente de alimentación y cable, cable de consola, dos cables RJ-48C, herramienta de tarjeta portadora
Dimensiones (Al x An x Pr): 3,4 x 17,5 x 18,25 pulgadas (xx cm. [tienen que proporcionarla])
Corriente 2 a 5 amperios
Frecuencia 50/60 Hz
Opciones del interfaz WAN • Quad T1/PRI (RJ-45); Quad E1/PRI (RJ-45)
Elemento Especificación
AS/NZS 3548 B
VCCI B
61000-4-5 (sobretensión)
IEC 950
AS/NZS 3260
TS 001
CTR 12/13
JATE
TS 014
SS 63 63 34
PD 7024
BE/SP-103
FCC Parte 68
CS-03
Cumple con NEBS Cisco AS5300/Voice Gateway es compatible con NEBS Nivel 3
Oficinas centrales de la Oficinas centrales en Europa Oficinas centrales Oficinas centrales de Asia
empresa Cisco Systems Europe s.a.r.l. de América Nihon Cisco Systems K.K.
Cisco Systems, Inc. Parc Evolic, Batiment L1/L2 Cisco Systems, Inc. Fuji Building, planta 9
170 West Tasman Drive 16 Avenue du Quebec 170 West Tasman Drive 3-2-3 Marunouchi
San Jose, California 95134-1706 Villebon, BP 706 San Jose, California 95134-1706 Chiyoda-ku, Tokio 100
EEUU 91961 Courtaboeuf Cedex EEUU Japón
http://www.cisco.com Francia http://www.cisco.com http://www.cisco.com
Tel: 408 526-4000 http://www-europe.cisco.com Tel: 408 526-7660 Tel: 81 3 5219 6250
800 553-NETS (6387) Tel: 33 1 69 18 61 00 Fax: 408 527-0883 Fax: 81 3 5219 6001
Fax: 408 526-4100 Fax: 33 1 69 28 83 26
Cisco Systems tiene más de 200 oficinas en los siguientes países. Las direcciones, números de teléfono y de fax pueden encontrarse en el
s i t i o We b C i s c o C o n n e c t i o n O n l i n e : h t t p : / / w w w. c i s c o . c o m / o f f i c e s .
Alemania • Arabia Saudí • Argentina • Australia • Austria • Bélgica • Brasil • Canadá • Chile • China • Colombia • Corea • Costa Rica • Croacia • Dinamarca • Dubai, EAU
• Eslovaquia • Eslovenia • España • Estados Unidos • Finlandia • Francia • Grecia • Hong Kong • Hungría • India • Indonesia • Irlanda • Israel • Italia • Japón • Luxemburgo
• Malasia • México • Holanda • Nueva Zelanda • Noruega • Perú • Filipinas • Polonia • Portugal • Puerto Rico • República Checa • Reino Unido • Rumania • Rusia •
Singapur • Sudáfrica • Suecia • Suiza • Tailandia • Taiwán • Turquía • Ucrania • Venezuela
Copyright © 1999 Cisco Systems, Inc. Reservados todos los derechos. Impreso en Estados Unidos. AccessPath es una marca comercial; Cisco, Cisco IOS, Cisco Systems, el logotipo de Cisco Systems e IOS son marcas registradas
de Cisco Systems, Inc. en Estados Unidos y en otros países. Las restantes marcas comerciales mencionadas en este documento son propiedad de sus respectivos propietarios. (9901R) 6/99 B&W
Data Sheet
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 19
Data Sheet
Configurations
The Cisco Catalyst 2960 LAN Base Series includes the following switches (Table 1):
Feature Description
Cisco Catalyst 2960PD-8TT-L 8 Ethernet 10/100 ports and 1 10/100/1000 PoE input port; compact size with no fan
Cisco Catalyst 2960-8TC-L 8 Ethernet 10/100 ports and 1 dual-purpose uplink port (10/100/1000 or SFP); compact size
with no fan
Cisco Catalyst 2960-24TT-L 24 Ethernet 10/100 ports and 2 fixed Ethernet 10/100/1000 uplink ports
Cisco Catalyst 2960-48TT-L 48 Ethernet 10/100 ports and 2 fixed Ethernet 10/100/1000 uplink ports
Cisco Catalyst 2960-24LT-L 24 Ethernet 10/100 ports (PoE supported on 8 ports) and 2 fixed Ethernet 10/100/1000
uplink ports
Cisco Catalyst 2960-24PC-L 24 Ethernet 10/100 PoE ports and 2 dual-purpose uplink ports
Cisco Catalyst 2960-24TC-L 24 Ethernet 10/100 ports and 2 dual-purpose uplink ports
Cisco Catalyst 2960-48TC-L 48 Ethernet 10/100 ports and 2 dual-purpose uplink ports
Cisco Catalyst 2960G-8TC-L 8 Ethernet 10/100/1000 ports, 1 of which is dual-purpose; compact size with no fan
The Cisco Catalyst 2960 LAN Base software image is a rich suite of intelligent services, including
advanced QoS, rate limiting, ACLs, and IPv6 management. The SFP-based Gigabit Ethernet ports
accommodate a range of SFP transceivers, including the Cisco 1000BASE-SX, 1000BASE-LX,
1000BASE-BX, 1000BASE-ZX, 100BASE-FX, 100BASE-LX, 100BASE-BX, and coarse
wavelength-division multiplexing (CWDM) SFP transceivers.
The Cisco Catalyst 2960-8TT-L has eight 10/100 ports with one 10/100/1000 PoE input port. This
switch does not need a power supply and receives power over the uplink from an upstream PoE
device, providing deployment flexibility and availability. It is ideal for wiring and space-constraint
applications. The power adaptor (PWR-A=) and power cord are optional and may be ordered
separately.
Gigabit Ethernet
At speeds of 1000 Mbps, Gigabit Ethernet provides the bandwidth to meet new and evolving
network demands, alleviate bottlenecks, and boost performance while increasing the return on
existing infrastructure investments. Today’s workers are placing higher demands on networks,
running multiple concurrent applications. For example, a worker joins a team conference call
through an IP videoconference, sends a 10-MB spreadsheet to meeting participants, broadcasts
the latest marketing video for the team to evaluate, and queries the customer relationship
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 19
Data Sheet
management (CRM) database for the latest real-time feedback. Meanwhile, a multigigabyte
system backup starts in the background and the latest virus updates are delivered to the client.
Cisco Catalyst Intelligent Ethernet switches help you realize the full benefits of adding intelligent
services into your networks. Deploying capabilities that make the network infrastructure highly
available to accommodate time-critical needs, scalable to accommodate growth, secure enough to
protect confidential information, and capable of differentiating and controlling traffic flows is critical
to further optimizing network operations.
Enhanced Security
The wide range of security features that the Cisco Catalyst 2960 LAN Base Series offers helps you
protect important information, keep unauthorized people off the network, guard privacy, and
maintain uninterrupted operation.
The Cisco Identity-Based Networking Services (IBNS) solution provides authentication, access
control, and security policy administration to secure network connectivity and resources. Cisco
IBNS in the Cisco Catalyst 2960 LAN Base Series prevents unauthorized access and helps ensure
that users get only their designated privileges. It provides the ability to dynamically administer
granular levels of network access. Using the 802.1x standard and the Cisco Secure Access
Control Server (ACS), users can be assigned a VLAN upon authentication, regardless of where
they connect to the network. This setup allows IT departments to enable strong security policies
without compromising user mobility and with minimal administrative overhead.
To guard against denial-of-service (DoS) and other attacks, ACLs can be used to restrict access to
sensitive portions of the network by denying packets based on source and destination MAC
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 19
Data Sheet
addresses, IP addresses, or TCP/User Datagram Protocol (UDP) ports. ACL lookups are done in
hardware, so forwarding performance is not compromised when ACL-based security is implemented.
Port security can be used to limit access on an Ethernet port based on the MAC address of the
device to which it is connected. It also can be used to limit the total number of devices plugged into
a switch port, thereby protecting the switch from a MAC flooding attack as well as reducing the
risks of rogue wireless access points or hubs.
With Dynamic Host Configuration Protocol (DHCP) snooping, DHCP spoofing can be thwarted by
allowing only DHCP requests (but not responses) from untrusted user-facing ports. Additionally,
the DHCP Interface Tracker (Option 82) feature helps enable granular control over IP address
assignment by augmenting a host IP address request with the switch port ID.
The MAC Address Notification feature can be used to monitor the network and track users by
sending an alert to a management station so that network administrators know when and where
users entered the network. Secure Shell Protocol Version 2 (SSHv2) and Simple Network
Management Protocol Version 3 (SNMPv3) encrypt administrative and network-management
information, protecting the network from tampering or eavesdropping. TACACS+ or RADIUS
authentication enables centralized access control of switches and restricts unauthorized users
from altering the configurations. Alternatively, a local username and password database can be
configured on the switch itself. Fifteen levels of authorization on the switch console and two levels
on the Web-based management interface provide the ability to give different levels of configuration
capabilities to different administrators.
● Cisco Discovery Protocol version 2 allows the Cisco Catalyst 2960 Series Switch to
negotiate a more granular power setting when connecting to a Cisco powered device, such
as IP phones or access points, than what is provided by IEEE classification.
● The PoE MIB provides proactive visibility into power usage and allows you to set different
power level thresholds.
● Link Layer Discovery Protocol (LLDP and LLDP-MED) adds support for IEEE 802.1AB link
layer discovery protocol for interoperability in multivendor networks. Switches exchange
speed, duplex, and power settings with end devices such as IP phones.
Voice-aware 802.1x port security disables the offending data VLAN when a violation is detected
without affecting Voice VLAN on the same switch port. Enhancements to the standard Spanning
Tree Protocol, such as Per-VLAN Spanning Tree Plus (PVST+), UplinkFast, and PortFast help
maximize network uptime. PVST+ allows for Layer 2 load sharing on redundant links to efficiently
use the extra capacity inherent in a redundant design. UplinkFast, PortFast, and BackboneFast all
greatly reduce the standard 30- to 60-second Spanning Tree Protocol convergence time. Flexlink
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 19
Data Sheet
provides bidirectional, fast convergence in less than 100 milliseconds. The Loopguard and bridge
protocol data unit (BPDU) guard enhancements provide Spanning Tree Protocol loop avoidance.
Advanced QoS
The Cisco Catalyst 2960 LAN Base Series offers superior multilayer QoS features to help ensure
that network traffic is classified and prioritized and that congestion is avoided in the best possible
manner. Configuration of QoS is greatly simplified through automatic QoS (Auto QoS), a feature
that detects Cisco IP phones and automatically configures the switch for the appropriate
classification and egress queuing. This optimizes traffic prioritization and network availability
without the challenge of a complex configuration.
The Cisco Catalyst 2960 LAN Base Series can classify, reclassify, police, mark, queue, and
schedule incoming packets and can queue and schedule packets at egress. Packet classification
allows the network elements to discriminate between various traffic flows and enforce policies
based on Layer 2 and Layer 3 QoS fields.
To implement QoS, the Cisco Catalyst 2960 LAN Base Series Switch first identifies traffic flows or
packet groups, then classifies or reclassifies these groups using the differentiated services code
point (DSCP) field or the 802.1p class of service (CoS) field. Classification and reclassification can
be based on criteria as specific as the source or destination IP address, source or destination
MAC address, or the Layer 4 TCP or UDP port. At the ingress, the Cisco Catalyst 2960 LAN Base
Series also polices to determine whether a packet is in or out of profile, marks to change the
classification label, passes through or drops out of profile packets, and queues packets based on
classification. Control-plane and data-plane ACLs are supported on all ports to help ensure proper
treatment on a per-packet basis.
The Cisco Catalyst 2960 LAN Base Series supports four egress queues per port, giving network
administrators more control in assigning priorities for the various applications on the LAN. At
egress, the switch performs congestion control and scheduling, the algorithm or process that
determines the order in which queues are processed. The Cisco Catalyst 2960 LAN Base Series
Switch supports Shaped Round Robin (SRR) and strict priority queuing. The SRR algorithm helps
ensure differential prioritization.
These QoS features allow network administrators to prioritize mission-critical and bandwidth-
intensive traffic, such as enterprise resource planning (ERP), voice (IP telephony traffic), and
computer-aided design and manufacturing (CAD/CAM), over applications such as FTP or e-mail.
For example, it would be undesirable to have a large file download destined to one port on a switch
increase latency in voice traffic destined to another port on this switch. This condition is avoided by
making sure that voice traffic is properly classified and prioritized throughout the network. Other
applications, such as Web browsing, can be handled on a lower-priority basis.
The Cisco Catalyst 2960 Series LAN Base can perform rate limiting through its support of the
Cisco committed information rate (CIR) function. Through CIR, bandwidth can be guaranteed in
increments as small as 1 Mbps. Bandwidth can be allocated based on several criteria, including
MAC source address, MAC destination address, IP source address, IP destination address, and
TCP or UDP port number. Bandwidth allocation is essential when network environments require
service-level agreements or when it is necessary to control the bandwidth given to certain users.
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 19
Data Sheet
Management
The new Express Setup feature simplifies the initial configuration of a switch. Now you can set up
the switch through a Web browser, eliminating the need for terminal-emulation programs and the
command-line interface (CLI). Express Setup reduces the cost of deployment by helping less-
skilled personnel quickly and easily set up switches.
Cisco Network Assistant is a PC-based network-management application optimized for LANs with
up to 250 users. Cisco Network Assistant offers centralized management of Cisco switches,
routers, and WLAN access points. It supports a wide range of Cisco Catalyst intelligent switches
from Cisco Catalyst 2960 through Cisco Catalyst 4506. Through a user-friendly GUI, users can
configure and manage a wide array of switch functions and start the device manager of Cisco
routers and Cisco wireless access points. A few mouse clicks enable the Cisco recommended
security, availability, and QoS features without the need to consult a detailed design guide. The
Security wizard automatically restricts unauthorized access to servers with sensitive data.
Smartports and wizards save time for network administrators, reduce human errors, and help
ensure that the configuration of the switch is optimized for these applications. Available at no cost,
Cisco Network Assistant can be downloaded from the Cisco Website.
In addition to Cisco Network Assistant, Cisco Catalyst 2960 LAN Base Series Switches provide for
extensive management using SNMP network-management platforms such as the CiscoWorks
LAN Management Solution (LMS). CiscoWorks LMS is a suite of powerful management tools that
simplify the configuration, administration, monitoring, and troubleshooting of Cisco networks. It
integrates these capabilities into a world-class solution for improving the accuracy and efficiency of
your operations staff, while increasing the overall availability of your network. CiscoWorks LMS
supports over 400 different device types, providing:
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 19
Data Sheet
Table 2. Features and Benefits of Cisco Catalyst 2960 LAN Base Switches
Feature Benefit
Ease of Use and Deployment ● Express Setup simplifies initial configuration with a Web browser, eliminating the need for
more complex terminal emulation programs and CLI knowledge.
● IEEE 802.3af and Cisco prestandard PoE support comes with automatic discovery to
detect a Cisco prestandard or IEEE 802.3af endpoint and provide the necessary power
without any user configuration.
● Auto Install for configuration and Image update: Simplify management of large number of
switches, by automatically downloading specified configuration and image
● DHCP autoconfiguration of multiple switches through a boot server eases switch
deployment.
● Automatic QoS (Auto QoS) simplifies QoS configuration in voice-over-IP (VoIP) networks
by issuing interface and global switch commands to detect Cisco IP phones, classify
traffic, and enable egress queue configuration.
● Autosensing on each 10/100 port detects the speed of the attached device and
automatically configures the port for 10- or 100-Mbps operation, easing switch deployment
in mixed 10- and 100-Mbps environments.
● Autonegotiating on all ports automatically selects half- or full-duplex transmission mode to
optimize bandwidth.
● Dynamic Trunking Protocol (DTP) helps enable dynamic trunk configuration across all
switch ports.
● Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel®
groups or Gigabit EtherChannel groups to link to another switch, router, or server.
● Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with
devices that conform to IEEE 802.3ad. This feature is similar to Cisco EtherChannel
technology and PAgP.
● DHCP Server enables a convenient deployment option for the assignment of IP
addresses in networks that do not have without a dedicated DHCP server.
● DHCP Relay allows a DHCP relay agent to broadcast DHCP requests to the network
DHCP server.
● 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, 1000BASE-BX, 100BASE-FX,
100BASE-LX, 100BASE-BX, and coarse wavelength-division multiplexing (CWDM)
physical interface support through a field-replaceable SFP module provides
unprecedented flexibility in switch deployment.
● The default configuration stored in flash memory ensures that the switch can be quickly
connected to the network and can pass traffic with minimal user intervention.
● Automatic medium-dependent interface crossover (Auto-MDIX) automatically adjusts
transmit and receive pairs if an incorrect cable type (crossover or straight-through) is
installed on a copper port.
● Time-domain reflectometer (TDR) to diagnose and resolve cabling problems on copper
ports.
● Configuration Rollback provides the capability to replace the current running configuration
with any saved Cisco IOS® Software configuration file. This functionality can be used to
revert to a previous configuration state, effectively rolling back any configuration changes
that were made since that configuration file was saved.
● DHCP Auto Install (Boot Host DHCP) and Auto Image Update allows the switch to
automatically download a configuration file and IOS image (future).
Manageability
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 7 of 19
Data Sheet
Superior Manageability ● Cisco IOS Software CLI support provides a common user interface and command set with all
Cisco routers and Cisco Catalyst desktop switches.
● IP Service Level Agreement (responder only) uses active monitoring to generate traffic in a
continuous, reliable, and predictable manner, thus enabling the measurement of network
performance and health.
● Switching Database Manager templates for security and QoS allow administrators to easily
adjust memory allocation to the desired features based on deployment-specific requirements.
● VLAN trunks can be created from any port using standards-based 802.1q tagging.
● Up to 255 VLANs per switch and up to 128 spanning-tree instances per switch are supported.
● Four thousand VLAN IDs are supported.
● Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for
easier administration and troubleshooting.
● Cisco VTP supports dynamic VLANs and dynamic trunk configuration across all switches.
● IGMPv3 snooping for IPv4 and MLD v1 and v2 Snooping for IPv6 provide fast client joins and
leaves of multicast streams and limits bandwidth-intensive video traffic to only the requestors.
● Remote SPAN (RSPAN) allows administrators to remotely monitor ports in a Layer 2 switch
network from any other switch in the same network.
● For enhanced traffic management, monitoring, and analysis, the Embedded Remote
Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms,
and events).
● Layer 2 trace route eases troubleshooting by identifying the physical path that a packet takes
from source to destination.
● All RMON groups are supported through a SPAN port, which permits traffic monitoring of a
single port, or a group of ports, from a single network analyzer or RMON probe.
● Domain Name System (DNS) provides IP address resolution with user-defined device names.
● Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by
downloading from a centralized location.
● Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet
switches.
● Multifunction LEDs per port for port status; half-duplex and full-duplex mode; and 10BASE-T,
100BASE-TX, and 1000BASE-T indication as well as switch-level status LEDs for system,
and redundant power supply provide a comprehensive and convenient visual management
system.
● Cisco Discovery Protocol Versions 1 and 2 help enable automatic switch discovery for
network management tools and communicate Voice VLAN information with Cisco IP phones.
● Link Layer Discovery Protocol (LLDP) and LLDP Media Extensions (LLDP-MED) including
client location information. Switches exchange link and device information in multivendor
networks.
● IPv6 Host provides basic IPv6 management such as IPv4/IPv6 dual stack, unicast address
types, ICMPv6, AAAA DNS lookup over IPv4, Secure Shell (SSH) for v6, IPv6 neighbor
discovery, CDP, Telnet, TFTP, SNMP, HTTP, HTTPS , Traceroute, syslog for v6.
Cisco Network Assistant ● Cisco Network Assistant is a no-charge, Windows-based application that simplifies the
Software administration of networks of up to 250 users. It supports a wide range of Cisco Catalyst
intelligent switches. With Cisco Network Assistant, users can manage Cisco Catalyst switches
and launch the device managers of Cisco integrated services routers and Cisco Aironet®
WLAN access points.
● The easy-to-use graphical interface provides both a topology map and front-panel view of the
cluster and stacks.
● Configuration wizards need just a few user inputs to automatically configure the switch to
optimally handle different types of traffic: voice, video, multicast, and high-priority data.
● A security wizard is provided to restrict unauthorized access to applications, servers, and
networks.
● Upgrading the Cisco IOS Software on Cisco Catalyst switches is a simple matter of pointing
and clicking, with one-click upgrades.
● Cisco Network Assistant supports multilayer feature configurations such as routing protocols,
ACLs, and QoS parameters.
● Multidevice and multiport configuration capabilities allow administrators to save time by
configuring features across multiple switches and ports simultaneously.
● The user-personalized interface allows modification of polling intervals, table views, and other
settings.
● Alarm notification provides automated e-mail notification of network errors and alarm
thresholds.
Cisco Express Setup ● Express Setup simplifies initial configuration of a switch through a Web browser, eliminating
the need for terminal emulation programs and CLI knowledge.
● The Web interface helps less-skilled personnel quickly and simply set up switches, thereby
reducing the cost of deployment.
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 8 of 19
Data Sheet
Superior Redundancy for ● IEEE 802.1x Voice-aware security disables the offending data VLAN when a violation is
Fault Backup detected without affecting Voice VLAN on the same switch port
● IEEE 802.1x readiness check determines readiness of connected end hosts, before
configuring 802.1x on the switch.
● Cisco UplinkFast and BackboneFast technologies help ensure quick failover recovery,
enhancing overall network stability and reliability.
● IEEE 802.1w Rapid Spanning Tree Protocol provides rapid spanning-tree convergence
independent of spanning-tree timers and the benefit of distributed processing.
● Per-VLAN Rapid Spanning Tree Plus (PVRST+) allows rapid spanning-tree reconvergence on
a per-VLAN spanning-tree basis, without requiring the implementation of spanning-tree
instances.
● Command-switch redundancy enabled in Cisco Network Assistant software allows
designation of a backup command switch that takes over if the primary command switch fails.
● Unidirectional Link Detection Protocol (UDLD) and Aggressive UDLD allow unidirectional links
to be detected and disabled to avoid problems such as spanning-tree loops.
● Switch port autorecovery (errdisable) automatically attempts to re-enable a link that is
disabled because of a network error.
● Cisco Redundant Power System 2300 (RPS 2300) support provides superior internal power-
source redundancy for up to six Cisco networking devices, resulting in improved fault
tolerance and network uptime.
● Bandwidth aggregation up to 8 Gbps through Cisco Gigabit EtherChannel technology and up
to 800 Mbps through Cisco Fast EtherChannel technology enhances fault tolerance and offers
higher-speed aggregated bandwidth between switches and to routers and individual servers.
● Flex Links provides link redundancy with convergence time 100ms without requiring Spanning
Tree Protocol.
● VLAN Flex Links load balancing improves network throughput by utilizing both links for traffic
distribution for different VLANs.
● Link State Tracking provides Layer 2 redundancy in the network when used in conjunction
with server or programmable logic controller (PLC) network interface card (NIC) adapter
teaming.
Integrated Cisco IOS ● Per-port broadcast, multicast, and unicast storm control prevents faulty end stations from
Software Features for degrading overall systems performance.
Bandwidth Optimization ● IEEE 802.1d Spanning Tree Protocol support for redundant backbone connections and loop-
free networks simplifies network configuration and improves fault tolerance.
● PVST+ allows for Layer 2 load sharing on redundant links to efficiently use the extra capacity
inherent in a redundant design.
● IEEE 802.1s Multiple Spanning Tree Protocol allows a spanning-tree instance per VLAN,
enabling Layer 2 load sharing on redundant links.
● Egress committed rate (ECR) guarantee provides load balancing and redundancy.
● Local Proxy Address Resolution Protocol (ARP) works in conjunction with Private VLAN Edge
to minimize broadcasts and maximize available bandwidth.
● VLAN1 minimization allows VLAN1 to be disabled on any individual VLAN trunk link.
● VLAN Trunking Protocol (VTP) pruning limits bandwidth consumption on VTP trunks by
flooding broadcast traffic only on trunk links required to reach the destination devices.
● Internet Group Management Protocol (IGMP) version 3 snooping provides fast client joins and
leaves of multicast streams and limits bandwidth-intensive video traffic to only the requestors.
● IGMP filtering provides multicast authentication by filtering out no subscribers and limits the
number of concurrent multicast streams available per port.
● Multicast VLAN registration (MVR) continuously sends multicast streams in a multicast VLAN
while isolating e streams from subscriber VLANs for bandwidth and security reasons.
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 9 of 19
Data Sheet
Advanced QoS ● Standard 802.1p CoS and DSCP field classification are provided, using marking and
reclassification on a per-packet basis by source and destination IP address, source and
destination MAC address, or Layer 4 TCP or UDP port number.
● Cisco control-plane and data-plane QoS ACLs on all ports help ensure proper marking on a
per-packet basis.
● Four egress queues per port enable differentiated management of up to four traffic types.
● SRR scheduling ensures differential prioritization of packet flows by intelligently servicing the
ingress and egress queues.
● Weighted tail drop (WTD) provides congestion avoidance at the ingress and egress queues
before a disruption occurs.
● Strict priority queuing guarantees that the highest-priority packets are serviced ahead of all
other traffic.
● There is no performance penalty for highly granular QoS functions.
Granular Rate Limiting ● The Cisco CIR function guarantees bandwidth in increments as small as 1 Mbps.
● Rate limiting is provided based on source and destination IP address, source and destination
MAC address, Layer 4 TCP and UDP information, or any combination of these fields, using
QoS ACLs (IP ACLs or MAC ACLs), class maps, and policy maps.
● Asynchronous data flows upstream and downstream from the end station or on the uplink are
easily managed using ingress policing and egress shaping.
● Up to 64 aggregate or individual polices are available per Fast Ethernet or Gigabit Ethernet
port.
Security
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 10 of 19
Data Sheet
Networkwide Security ● IEEE 802.1x allows dynamic, port-based security, providing user authentication.
Features ● IEEE 802.1x with VLAN assignment allows a dynamic VLAN assignment for a specific user
regardless of where the user is connected.
● IEEE 802.1x with voice VLAN permits an IP phone to access the voice VLAN irrespective of
the authorized or unauthorized state of the port.
● IEEE 802.1x and port security are provided to authenticate the port and manage network
access for all MAC addresses, including those of the client.
● IEEE 802.1x with Guest VLAN allows guests without 802.1x clients to have limited network
access on the guest VLAN.
● Web authentication for non-802.1x clients allows non-802.1x clients to use an SSL-based
browser for authentication.
● MAC Auth Bypass (MAB) for voice allows third-party IP phones without an 802.1x supplicant
to get authenticated using their MAC address.
● Port-based ACLs for Layer 2 interfaces allow application of security policies on individual
switch ports.
● Unicast MAC filtering prevents the forwarding of any type of packet with a matching MAC
address.
● Unknown unicast and multicast port blocking allows tight control by filtering packets that the
switch has not already learned how to forward.
● SSHv2 and SNMPv3 provide network security by encrypting administrator traffic during Telnet
and SNMP sessions. SSHv2 and the cryptographic version of SNMPv3 require a special
cryptographic software image because of U.S. export restrictions.
● Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the Cisco Secure
intrusion detection system (IDS) to take action when an intruder is detected.
● TACACS+ and RADIUS authentication enable centralized control of the switch and restrict
unauthorized users from altering the configuration.
● MAC address notification allows administrators to be notified of users added to or removed
from the network.
● DHCP snooping allows administrators to ensure consistent mapping of IP to MAC addresses.
This can be used to prevent attacks that attempt to poison the DHCP binding database, and
to rate-limit the amount of DHCP traffic that enters a switch port.
● DHCP Interface Tracker (Option 82) feature augments a host IP address request with the
switch port ID.
● Port security secures the access to an access or trunk port based on MAC address.
● After a specific timeframe, the aging feature removes the MAC address from the switch to
allow another device to connect to the same port.
● Trusted Boundary provides the ability to trust the QoS priority settings if an IP phone is
present and to disable the trust setting if the IP phone is removed, thereby preventing a
malicious user from overriding prioritization policies in the network.
● Multilevel security on console access prevents unauthorized users from altering the switch
configuration.
● The user-selectable address-learning mode simplifies configuration and enhances security.
● BPDU Guard shuts down Spanning Tree Protocol PortFast-enabled interfaces when BPDUs
are received to avoid accidental topology loops.
● Spanning-Tree Root Guard (STRG) prevents edge devices not in the network administrator’s
control from becoming Spanning Tree Protocol root nodes.
● Voice VLAN aware port security and BPDU Guard allow Voice VLAN traffic to not be
disrupted when security violations occur.
● IGMP filtering provides multicast authentication by filtering out no subscribers and limits the
number of concurrent multicast streams available per port.
● Dynamic VLAN assignment is supported through implementation of VLAN Membership Policy
Server (VMPS) client functions to provide flexibility in assigning ports to VLANs. Dynamic
VLAN helps enable the fast assignment of IP addresses.
● Cisco Network Assistant software security wizards ease the deployment of security features
for restricting user access to a server as well as to a portion of or the entire network.
● Up to 512 (Aces) are supported, with two profiles: Security (384 Security ACL entries and 128
QoS policies), and QoS (128 Security ACL entries and 384 QoS policies).
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 11 of 19
Data Sheet
Description Specification
Performance ● 16 Gbps switching fabric (Catalyst 2960PD-8TT-L , Catalyst 2960-8TC-L, Catalyst 2960-
24TT-L, Catalyst 2960-24TC-L, Catalyst 2960-24LT-L, Catalyst 2960-24PC-L, Catalyst
2960-48TT-L, Catalyst 2960-48TC-L)
● 32 Gbps switching fabric (Catalyst 2960G-8TC-L, Catalyst 2960G-24TC-L, Catalyst
2960G-48TC-L)
● Forwarding rate based on 64-byte packets:
◦ Catalyst 2960PD-8TT-L: 2.7 Mpps
◦ Catalyst 2960-8TC-L: 2.7 Mpps
◦ Catalyst 2960-24TT-L: 6.5 Mpps
◦ Catalyst 2960-24TC-L: 6.5 Mpps
◦ Catalyst 2960-24LT-L: 6.5 Mpps
◦ Catalyst 2960-24PC-L : 6.5 Mpps
◦ Catalyst 2960-48TT-L: 10.1 Mpps
◦ Catalyst 2960-48TC-L: 10.1 Mpps
◦ Catalyst 2960G-8TC-L: 11.9 Mpps
◦ Catalyst 2960G-24TC-L: 35.7 Mpps
◦ Catalyst 2960G-48TC-L: 39.0 Mpps
● 64 MB DRAM
● 32 MB flash memory
● Configurable up to 8000 MAC addresses
● Configurable up to 255 IGMP groups
● Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum
Ethernet frame size of 9018 bytes (Jumbo frames) for bridging on Gigabit Ethernet ports,
and up to 1998 bytes for bridging of Multiprotocol Label Switching (MPLS) tagged frames
on both 10/100 and 10/100/1000 ports
Power Connectors ● Customers can provide power to a switch by using either the internal power supply or the
Cisco RPS 675. The connectors are located at the back of the switch.
● Note: The Catalyst 2960-8TC-L and Catalyst 2960G-8TC-L do not have RPS ports.
● Internal-Power-Supply Connector
● The internal power supply is an autoranging unit.
● The internal power supply supports input voltages between 100 and 240VAC.
● Use the supplied AC power cord to connect the AC power connector to an AC power
outlet.
● Cisco RPS Connector
● The connector offers connection for an optional Cisco RPS 2300 that uses AC input and
supplies DC output to the switch.
● The connector offers a 2300W redundant power system that supports up to six external
network devices and provides power to two failed devices at a time.
● The connector automatically senses when the internal power supply of a connected
device fails and provides power to the failed device, preventing loss of network traffic.
● Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-
power-system receptacle.
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 12 of 19
Data Sheet
Dimensions (H x W x D) ● Cisco Catalyst 2960PD-8TT-L : 1.73 x 10.6 x 6.2 in. (4.4 x 27 x 15.7 cm)
● Cisco Catalyst 2960-8TC-L: 1.73 x 10.6 x 6.4 in. (4.4 x 27 x 16.3 cm)
● Cisco Catalyst 2960-24TT-L: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
● Cisco Catalyst 2960-48TT-L: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
● Cisco Catalyst 2960-24TC-L: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
● Cisco Catalyst 2960-24LT-L: 1.73 x 17.5 x 13 in. (4.4 x 44.5 x 33.2 cm)
● Cisco Catalyst 2960-24PC-L : 1.73 x 17.5 x 13 in. (4.4 x 44.5 x 33.2 cm)
● Cisco Catalyst 2960-48TC-L: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
● Cisco Catalyst 2960G-8TC-L: 1.73 x 10.6 x 8.1 in. (4.4 x 27 x 20.5 cm)
● Cisco Catalyst 2960G-24TC-L: 1.73 x 17.5 x 12.9 in. (4.4 x 44.5 x 32.8 cm)
● Cisco Catalyst 2960G-48TC-L: 1.73 x 17.5 x 12.9 in. (4.4 x 44.5 x 32.8 cm)
Acoustic Noise ● ISO 7779: Bystander position operating to an ambient temperature of 25°C
● Cisco Catalyst 2960PD-8TT-L: 0 dBa (no fan)
● Cisco Catalyst 2960-8TC-L: 0 dBa (no fan)
● Cisco Catalyst 2960-24TT-L: 40 dBa
● Cisco Catalyst 2960-48TT-L: 40 dBa
● Cisco Catalyst 2960-24TC-L: 40 dBa
● Cisco Catalyst 2960-24LT-L : 48 dBa
● Cisco Catalyst 2960-24PC-L : 48 dBa
● Cisco Catalyst 2960-48TC-L: 40 dBa
● Cisco Catalyst 2960G-8TC-L: 0 dBa (no fan)
● Cisco Catalyst 2960G-24TC-L: 41 dBa
● Cisco Catalyst 2960G-48TC-L: 43 dBa
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 13 of 19
Data Sheet
Table 4. Power Specifications for Cisco Catalyst 2960 LAN Base Switches
Description Specification
DC Input Voltages ● (No RPS input for Cisco Catalyst 2960PD-8TT-L , Catalyst 2960-8TC-L and Catalyst
(RPS Input) 2960G-8TC-L)
● Cisco Catalyst 2960-24TT-L: +12V at 5A
● Cisco Catalyst 2960-48TT-L: +12V at 5A
● Cisco Catalyst 2960-24TC-L: +12V at 5A
● Cisco Catalyst 2960-24LT-L : +12V at 8.3A, -48V at 2.7A
● Cisco Catalyst 2960-24PC-L : +12V at 11.25A, -48V at 7.8A
● Cisco Catalyst 2960-48TC-L: +12V at 5A
● Cisco Catalyst 2960G-24TC-L: +12V at 10.5A
● Cisco Catalyst 2960G-48TC-L: +12V at 10.5A
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 14 of 19
Data Sheet
Table 5. Management and Standards Support for Cisco Catalyst 2960 LAN Base Switches
Description Specification
● CISCO-DHCP-SNOOPING-MIB ● CISCO-VTP-MIB
● CISCO-ENTITY-VENDORTYPE-OID-MIB ● ENTITY-MIB
● CISCO-ENVMON-MIB ● ETHERLIKE-MIB
● CISCO-ERR-DISABLE-MIB ● IEEE8021-PAE-MIB
● CISCO-FLASH-MIB ● IEEE8023-LAG-MIB
● CISCO-FTP-CLIENT-MIB ● IF-MIB
● CISCO-IGMP-FILTER-MIB ● INET-ADDRESS-MIB
● CISCO-IMAGE-MIB ● OLD-CISCO-CHASSIS-MIB
● CISCO-IP-STAT-MIB ● OLD-CISCO-FLASH-MIB
● CISCO-LAG-MIB ● OLD-CISCO-INTERFACES-MIB
● CISCO-MAC-NOTIFICATION-MIB ● OLD-CISCO-IP-MIB
● CISCO-MEMORY-POOL-MIB ● OLD-CISCO-SYS-MIB
● CISCO-PAGP-MIB ● OLD-CISCO-TCP-MIB
● CISCO-PING-MIB ● OLD-CISCO-TS-MIB
● CISCO-POE-EXTENSIONS-MIB ● RFC1213-MIB
● CISCO-PORT-QOS-MIB ● RMON-MIB
● CISCO-PORT-SECURITY-MIB ● RMON2-MIB
● CISCO-PORT-STORM-CONTROL-MIB ● SNMP-FRAMEWORK-MIB
● CISCO-PRODUCTS-MIB ● SNMP-MPD-MIB
● CISCO-PROCESS-MIB ● SNMP-NOTIFICATION-MIB
● CISCO-RTTMON-MIB ● SNMP-TARGET-MIB
● CISCO-SMI-MIB ● SNMPv2-MIB
● CISCO-STP-EXTENSIONS-MIB ● TCP-MIB
● CISCO-SYSLOG-MIB ● UDP-MIB
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 15 of 19
Data Sheet
Description Specification
Ordering Information
Table 8 gives ordering information for Cisco Catalyst 2960 LAN Base Switches.
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 16 of 19
Data Sheet
Table 8. Ordering Information for Cisco Catalyst 2960 LAN Base Switches
WS-C2960-8TC-L ● 8 Ethernet 10/100 ports and 1 dual-purpose uplink (dual-purpose uplink port has one
10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
● Compact size with no fan; magnet included
● LAN Base Image installed
WS-C2960-24LT-L ● 24 Ethernet 10/100 ports with 8 PoE ports and two 10/100/1000TX uplinks
● 1 RU fixed-configuration
● LAN Base Image installed
WS-C2960-24TC-L ● 24 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has
one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
● 1 RU fixed-configuration
● LAN Base Image installed
WS-C2960-48TC-L ● 48 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has
one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
● 1 RU fixed-configuration
● LAN Base Image installed
WS-C2960G-8TC-L ● 7 Ethernet 10/100/1000 ports and 1 dual-purpose uplink (dual-purpose uplink port has
one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
● Compact size with no fan; magnet included
● LAN Base Image installed
WS-C2960G-24TC-L ● 20 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink port
has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
● 1 RU fixed-configuration
● LAN Base Image installed
WS-C2960G-48TC-L ● 44 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink port
has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
● 1 RU fixed-configuration
● LAN Base Image installed
PWR-RPS2300 Cisco Redundant Power System 2300 and Blower,No Power Supply
BLNK-RPS2300= Spare Bay Insert for Cisco Redundant Power System 2300
CAB-RPS2300-E= Spare RPS2300 Cable for Cisco Catalyst 2960-24PC-L and 2960-24LT-L switches
CAB-RPS2300= Spare RPS2300 Cable for Cisco Catalyst 2960 switches except Catalyst 2960-24PC-L and
2960-24LT-L switches
BLWR-RPS2300= Spare 45CFM Blower for Cisco Redundant Power System 2300
CBLGRD-C2960-8TC= Cable guard for the Cisco Catalyst 2960-8TC compact switch
CBLGRD-C2960G-8TC= Cable guard for the Cisco Catalyst 2960G-8TC compact switch
RCKMNT-19-CMPCT= Rack-mount for the Cisco Catalyst 2960-8TC and Catalyst 2960G-8TC compact switches
RCKMNT-1RU= Spare rack-mount kit for the Cisco Catalyst 2960 Series
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 17 of 19
Data Sheet
RCKMNT-REC-1RU= 1 RU recessed rack-mount kit for the Cisco Catalyst 2960 Series
GLC-LH-SM= 1000BASE-LX/LH SFP transceiver module for MMF and SMF, 1300-nm wavelength
GLC-BX-D= 1000BASE-BX10 SFP transceiver module for single strand SMF, 1490-nm TX / 1310-nm RX
wavelength
GLC-BX-U= 1000BASE-BX10 SFP transceiver module for single strand SMF, 1310-nm TX / 1490-nm RX
wavelength
GLC-GE-100FX= 100BASE-FX SFP module for Gigabit Ethernet ports, 1310-nm wavelength, 2 km over MMF
Not supported on the Cisco Catalyst 2960-8TC and Catalyst 2960G-8TC compact switches
GLC-FE-100FX= 100BASE-FX SFP module for 100-Mb ports, 1310-nm wavelength, 2 km over MMF
GLC-FE-100LX= 100BASE-LX10 SFP module for 100-Mb ports, 1310-nm wavelength, 10 km over SMF
GLC-FE-100BX-D= 100BASE-BX10-D SFP module for 100-Mb ports, 1550-nm TX /1310-nm RX wavelength,
10 km over single-strand SMF
GLC-FE-100BX-U= 100BASE-BX10-U SFP module for 100-Mb ports, 1310-nm TX/1550-nm RX wavelength,
10 km over single-strand SMF
CWDM-SFP-1470= Cisco CWDM SFP 1470 nm; Gigabit Ethernet and 1G/2G FC (gray)
CWDM-SFP-1490= Cisco CWDM SFP, 1490 nm; Gigabit Ethernet and 1G/2G FC (violet)
CWDM-SFP-1510= Cisco CWDM SFP, 1510 nm; Gigabit Ethernet and 1G/2G FC (blue)
CWDM-SFP-1530= Cisco CWDM SFP, 1530 nm; Gigabit Ethernet and 1G/2G FC (green)
CWDM-SFP-1550= Cisco CWDM SFP, 1550 nm; Gigabit Ethernet and 1G/2G FC (yellow)
CWDM-SFP-1570= Cisco CWDM SFP, 1570 nm; Gigabit Ethernet and 1G/2G FC (orange)
CWDM-SFP-1590= Cisco CWDM SFP, 1590 nm; Gigabit Ethernet and 1G/2G FC (red)
CWDM-SFP-1610= Cisco CWDM SFP, 1610 nm; Gigabit Ethernet and 1G/2G FC (brown)
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 18 of 19
Data Sheet
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 19 of 19