Академический Документы
Профессиональный Документы
Культура Документы
Bill Of Quantity & Price Breakdown for Electrical & Instrumentation Work PKG #A (OBRA)
4.8 765kV ICT-1 RTCC PANEL, COMMON MARSHALLING KIOSK, CMS PANEL PNL 8.00
With Oil Filtering Work
4.9 765kV BUS REACTOR R PHASE & Supply Oil Filtering Equipment Set 1.00
Include Oil Test & Supply N2 Gas
4.12 765kV BUS REACTOR BANK COMMON MARSHALLING KIOSK Set 1.00
With Oil Filtering Work
4.13 765kV LINE REACTOR R PHASE & Supply Oil Filtering Equipment Set 1.00
Include Oil Test & Supply N2 Gas
4.16 765kV LINE REACTOR BANK COMMON MARSHALLING KIOSK PNL 1.00
With Oil Filtering Work
4.17 400kV BUS REACTOR & Supply Oil Filtering Equipment
Include Oil Test & Supply N2 Gas
4.21 NGR FOR 400kV LINE REACTOR BANK at Obra B Set 1.00
4.23 Transformer Rail (For GT, ICT , Reactor , UT, ST, UAT, SAT) M 4,000.00
4.24 All Test for Before Energizing ICT & Reactor Lot 1.00
5 ISOLATED PHASE BUSDUCT
5.1 Main Run Phase side, 22kV, 25000A, 170kA for 1 sec. & 466kA Peak IPBD, Include Supply Dry Air
and Aluminum Welding M/C M 520.00
5.2 Delta Run 22kV, 15000A, 300kA for 1sec.,822 kA Peak IPBD, Include Supply Dry Air
R and Aluminum Welding M/C M 320.00
5.3 Tap-offs to UT1, 22kV, 1250A, 300kA for 1sec.,822 kA Peak IPBD, Include Supply Dry Air
and Aluminum Welding M/C M 170.00
5.4 Tap-offs to UT2, 22kV, 1250A, 300kA for 1sec.,822 kA Peak IPBD, Include Supply Dry Air
and Aluminum Welding M/C M 140.00
5.5 Tap-off to LAVT Cubicle 22kV, 500A, 300kA for 1sec.,822 kA Peak IPBD, Include Supply Dry Air
and Aluminum Welding M/C M 24.00
5.6 Tap-off to NG Cubicle 22kV, 500A, 300kA for 1sec.,822 kA Peak IPBD, Include Supply Dry Air
and Aluminum Welding M/C M 8.00
5.7 Tap-off to Exct. Transf. 22kV, 500A, 300kA for 1sec.,822 kA Peak IPBD, Include Supply Dry Air
and Aluminum Welding M/C M 40.00
6.11 Segregated Phase Bus-duct 11 kV, 2500A, 50kA / 1s, 125kApeak TRF. SIDE ADAPTOR BOX Nos 4.00
6.12 Segregated Phase Bus-duct 11 kV, 2500A, 50kA / 1s, 125kApeak SWGR. SIDE ADAPTOR BOX Nos 12.00
6.13 Segregated Phase Bus-duct 11 kV, 2500A, 50kA / 1s, 125kApeak RUBBER BELLOW ASSEMBLY Nos 16.00
6.14 Segregated Phase Bus-duct 11 kV, 2500A, 50kA / 1s, 125kApeak FLEXIBLE CONN. AT TRANSFORMER
(3∅) Nos 4.00
6.15 Segregated Phase Bus-duct 11 kV, 2500A, 50kA / 1s, 125kApeak FLEXIBLE CONN. AT SWGR. (3∅) Nos 12.00
INSULATORS,SEAL OF BUSHING WALL
Segregated Phase Bus-duct 11 kV, 2500A, 50kA / 1s, 125kApeak FRAME Nos 6.00
6.16 ASSEMBLY
6.17 Segregated Phase Bus-duct 3.3 kV, 2500A, 40kA / 1s, 100kApeak ROUTE LENGTH OF BUSDUCT (MTRS) Metrs 168.00
90 Deg Bend (Horizontal/Vertical) (Nos.)
6.18 Segregated Phase Bus-duct 3.3 kV, 2500A, 40kA / 1s, 100kApeak Nos 34.00
6.19 Segregated Phase Bus-duct 3.3 kV, 2500A, 40kA / 1s, 100kApeak TRF. SIDE ADAPTOR BOX Nos 6.00
6.20 Segregated Phase Bus-duct 3.3 kV, 2500A, 40kA / 1s, 100kApeak SWGR. SIDE ADAPTOR BOX Nos 6.00
6.21 Segregated Phase Bus-duct 3.3 kV, 2500A, 40kA / 1s, 100kApeak RUBBER BELLOW ASSEMBLY Nos 12.00
FLEXIBLE CONN. AT TRANSFORMER
6.22 Segregated Phase Bus-duct 3.3 kV, 2500A, 40kA / 1s, 100kApeak (3∅) Nos 6.00
6.23 Segregated Phase Bus-duct 3.3 kV, 2500A, 40kA / 1s, 100kApeak FLEXIBLE CONN. AT SWGR. (3∅) Nos 6.00
INSULATORS,SEAL OF BUSHING WALL
Segregated Phase Bus-duct 3.3 kV, 2500A, 40kA / 1s, 100kApeak FRAME Nos 6.00
6.24 ASSEMBLY
6.25 Segregated Phase Bus-duct supporting Structure Supporting structure Lot 1.00
6.26 All Test for Before Energizing SPB Lot 1.00
7 10BBA01 - 11kV UNIT SWGR 1A (50kA/1sec, 2500A) PNL 17.00
8 10BBA02 - 11kV UNIT SWGR 1B (50kA/1sec, 2500A) PNL 18.00
9 20BBA01 - 11kV UNIT SWGR 2A (50kA/1sec, 2500A) PNL 17.00
10 20BBA02 - 11kV UNIT SWGR 2B (50kA/1sec, 2500A) PNL 16.00
11 90BCA01 - 11kV STATION SWGR 1 (50kA/1sec, 3150A) PNL 15.00
12 90BCA02 - 11kV STATION SWGR 2 (50kA/1sec, 3150A) PNL 19.00
13 90BCA03 - 11kV STATION SWGR 3 (50kA/1sec, 3150A) PNL 16.00
14 90BCA04 - 11kV STATION SWGR 4 (50kA/1sec, 3150A) PNL 16.00
15 MV TRANSFORMER PACKAGE
15.1 11 / 3.45kV, 10 MVA, ONAN, Three Phase, Two (2) windings, Dyn11, Z**=8% , outdoor type, MV TRANSFORMER
with ±5% off circuit taps in steps of 2.5% on HV side, complete with all fittings & accessories With Oil Filtering Work
as detailed in specification. & Supply Oil Filtering Equipment Nos 6.00
Include Oil Test & Supply N2 Gas
19.1 11 / 0.433 kV, 3 ph, 50 Hz, 2.5 MVA, Dyn1, Z=10%, AN, OCTC + 5% in steps of 2.5% DRY TYPE TRANSFORMER Nos 12.00
19.2 11 / 0.433 kV, 3 ph, 50 Hz,1.6 MVA, Dyn1, Z=6.25%, AN, OCTC + 5% in steps of 2.5% DRY TYPE TRANSFORMER Nos 6.00
20 LV PMCC/MCC/DB
20.1 Boiler PMCC-1 PNL 10.00
20.2 Boiler PMCC-2 PNL 10.00
20.3 Boiler MCC-1 PNL 26.00
20.4 Boiler MCC-2 PNL 25.00
20.5 Coal Mill MCC-1 PNL 13.00
20.6 Coal Mill MCC-2 PNL 13.00
20.7 Boiler Valve Damper MCC-1 PNL 17.00
20.8 Boiler Valve Damper MCC-2 PNL 17.00
20.9 Turbine PMCC-1 PNL 15.00
20.10 Turbine PMCC-2 PNL 15.00
20.11 Turbine MCC-1 PNL 15.00
20.12 Turbine MCC-2 PNL 15.00
20.13 Turbine Valve ACDB -1 PNL 19.00
20.14 Turbine Valve ACDB -2 PNL 17.00
20.15 Emergency PMCC-1 PNL 22.00
20.16 Emergency PMCC-2 PNL 22.00
20.17 DG PCC PNL 5.00
20.18 STATION PCC-1 PNL 13.00
20.19 STATION PCC-2 PNL 11.00
20.20 STATION ACDB-1 PNL 8.00
20.21 STATION ACDB-2 PNL 7.00
20.22 [90BGW01] HVAC PCC PNL 10.00
20.23 [90BLW01] HVAC MCC-CCB PNL 11.00
20.24 [90BLW02] HVAC MCC-TG-1 PNL 7.00
20.25 [90BLW03] HVAC MCC-TG-2 PNL 7.00
20.26 HVAC DB DG Bldg. PNL Later
20.27 Air Comp. MCC PNL Later
20.28 HVAC DB AIS SWYD Control Bldg. PNL Later
20.29 HVAC DB GIS BUILDIING PNL Later
21 EMS & SWGR SCADA SYSTEM - UNIT 1
21.1 Data Concentrator Panel PNL 2.00
21.2 HMI SET 1.00
21.3 Printer SET 1.00
22 EMS & SWGR SCADA SYSTEM - UNIT 2
22.1 Data Concentrator Panel PNL 2.00
22.2 HMI SET 1.00
22.3 Printer SET 1.00
23 Moasic tile based backup control panel (Unit-1) PNL 1.00
24 Moasic tile based backup control panel (Unit-2) PNL 1.00
25 NON-SEGREGATED PHASE BUS-DUCT
NSPBD FOR BOILER SERVICE TRANSFORMER I/C-1 (415V, 3PH 4W,4000 A,50KA,In door) for
25.1 Unit#1 NSPBD Metrs 56.00
27.1
Hot dip galvanized mild steel cable tray, Ladder type
Thickness: 2 mm
Rung Spacing: 250 mm, 35 x15 x 15 mm width of rung
Length: 2500mm
side rail bend 20mm
27.1.1 600mmW x 100H Ladder type cable tray M 2,450.00
27.1.2 300mmW x 100H Ladder type cable tray M 262.00
27.2
Hot dip galvanized mild steel cable tray, Perforated trough type
Thickness: 2 mm
Length: 2500mm
side rail bend 20mm
27.2.1 600mmW x 100H Perforated type cable tray M 2,784.00
27.2.2 300mmW x 100H Perforated type cable tray M 526.00
27.3
Cable trays horizontal bend 90 deg for ladder
Thickness: 2 mm
Rung Spacing: 250 mm, 35 mm width of rung
27.3.1 600mm Wide - Elbow Radius:600mm EA 109.00
27.3.2 600mm Wide - Elbow Radius:300mm EA 9.00
27.3.3 300mm Wide - Elbow Radius:300mm EA 12.00
27.4 Cable trays horizontal bend 90 deg for perforated trays
Thickness: 2 mm
27.4.1 600mm Wide - Elbow Radius:600mm EA 46.00
27.4.2 600mm Wide - Elbow Radius:300mm EA 4.00
27.4.3 300mm Wide - Elbow Radius:300mm EA 7.00
27.5
Cable trays 90 deg vertical bend inside for ladder
Thickness: 2 mm
Rung Spacing: 250 mm, 35 mm width of rung
27.5.1 600mm Wide - Elbow Radius:600mm EA 47.00
27.5.2 300mm Wide - Elbow Radius:300mm EA 4.00
27.6 Cable trays 90 deg vertical bend inside for perforated trays
Thickness: 2 mm
27.6.1 600mm Wide - Elbow Radius:600mm EA 24.00
27.6.2 300mm Wide - Elbow Radius:300mm EA 6.00
27.7
Cable trays 90 deg vertical bend outside for ladder
Thickness: 2 mm
Rung Spacing: 250 mm, 35 mm width of rung
27.7.1 600mm Wide - Elbow Radius:600mm EA 45.00
27.7.2 300mm Wide - Elbow Radius:300mm EA 4.00
27.8 Cable trays 90 deg vertical bend outside for perforated trays
Thickness: 2 mm
27.8.1 600mm Wide - Elbow Radius:300mm EA 19.00
27.8.2 600mm Wide - Elbow Radius:600mm EA 6.00
27.9
Cable trays Tee connection for ladder trays
Thickness: 2 mm
Rung Spacing: 250 mm, 35 mm width of rung
27.9.1 600mm Wide - Elbow Radius:600mm EA 49.00
27.9.2 600mm Wide - Elbow Radius:300mm EA 5.00
27.10 Cable trays Tee connection for perforated trays
Thickness: 2 mm
27.10.1 600mm Wide - Elbow Radius:600mm EA 24.00
27.10.2 600mm Wide - Elbow Radius:300mm EA 26.00
27.11
Cable trays Cross connection for ladder trays
Thickness: 2 mm
Rung Spacing: 250 mm, 35 mm width of rung
27.11.1 600mm Wide - Elbow Radius:300mm EA 14.00
27.12 Cable trays Cross connection for perforated trays
Thickness: 2 mm
27.12.1 600mm Wide - Elbow Radius:300mm EA 30.00
27.13
Hot dip galvanized mild steel cable tray reducer, Ladder type
Thickness: 2 mm
Rung Spacing: 250 mm, 35 mm width of rung
27.13.1 600mm - 300mm Wide right side EA 20.00
27.14
Hot dip galvanized mild steel cable tray reducer, for perforated trays
Thickness: 2 mm
27.14.1 600mm - 300mm Wide left side EA 6.00
27.15 Suport for Cable Tray
27.15.1 Unistrut-Channel m 3,000.00
27.15.2 C-Channel m 700.00
27.15.3 L-Angle m 700.00
27.16 Touch up paints
27.16.1 Red lead primer L 20.00
27.16.2 Oil Primer L 10.00
27.16.3 Aluminium Paint (Final Paint) L 10.00
27.17 Paint strips with following colour, 2 inch width
27.17.1 Red M 20.00
27.17.2 Yellow M 20.00
27.17.3 Blue M 20.00
27.17.4 Green M 20.00
28.1 HDG Rigid Steel Conduit with ISI mark, Standard length of 3m with both
end threaded
28.1.1 20mm (3/4") M 27,916.00
28.1.2 25mm (1") M 4,226.00
28.1.3 32mm (1-1/4") M 1,238.00
28.1.4 40mm (1-1/2") M 122.00
28.1.5 50mm (2") M 100.00
28.1.6 82mm (3") M 80.00
28.1.7 104mm (4") M 200.00
28.2 Flexible Conduit: made with bright, cold_rolled, annealed and
electrogalvanized mild steel strips coated with PVC & weather proof
28.2.1 20mm (3/4") M 3,266.00
28.3 Flexible Conduit: made with heat resistant lead coated galvanised steel
with water leak, fire and rust proof protection with PVC coat
28.3.1 20mm (3/4") M 99.00
28.4 Normal Bend, HDG Rigid Steel Conduit
28.5.1 20mm (3/4") Standard bending radius EA 709.00
28.5.2 40mm (1-1/2"), Min 210mm Radius EA 20.00
28.5.3 50mm (2"), Min 300mm Radius EA 12.00
28.5.4 82mm (3"), Min 600mm Radius EA 20.00
28.5.5 104mm (4"), Min 900mm Radius EA 15.00
28.5.6 20mm (3/4") - 4 way with 4 M6 Fixing Screw EA 1,844.00
28.5.7 20mm (3/4") - 3 way with 4 M6 Fixing Screw EA 80.00
28.5.8 Plug for 20mm junction box EA 1,923.00
28.6 Hi-PVC Conduit with ISI mark, Standard length of 3m with Coupling &
Normal Bend
28.6.1 20mm (3/4") M 3,000.00
28.6.2 25mm (1") M 1,000.00
28.6.3 40mm (1-1/2") M 500.00
28.6.4 104mm (4") M 2,500.00
28.8 Suport for Conduit
28.8.1 Unistrut-Channel m 2,000.00
28.8.2 C-Channel m 800.00
28.8.3 L-Angle m 300.00
28.9 Pull box
28.9.1 300 x 300 x 300 EA 500.00
28.9.2 500 x 500 x 300 EA 200.00
28.9.3 1000 x 1000 x 500 EA 100.00
29 Light Fixture
31.3.1 240V AC, 6A/16A, 1way- single pole Switch and Socket (2P+E)- 2 gang EA 69.00
32 Industrial Sockets EA -
32.1 Industrial Surface mounted type 240V AC ,16A ,2P+E scocet, with mounting box, EA 64.00
suitable for Outdoor installation
32.2 Flameproof Surface mounted type 240V AC ,16A ,2P+E scocet, with mounting box, -
suitable for Outdoor installation EA
32.3 Welding Power Socket 415V AC, 63A, 3P+E with Interlocked plug & switch with earthing 26.00
EA
contact; provided with Metal gasketed construction suitable for outdoor installation
32.4 Welding Power Socket 415V AC, 125A, 3P+E with Interlocked plug & switch with 6.00
EA
earthing contact; provided with Metal gasketed construction suitable for outdoor installation
32.5 Welding Power Socket 415V AC, 250A, 3P+E with Interlocked plug & switch with 2.00
EA
earthing contact; provided with Metal gasketed construction suitable for outdoor installation
Reducer for Steel conduit Steel,HDG,20mm dia to XX mm dia (Female thread at 20mm
33.1 side and Male thread at XXmm side) with 1no. Bushing, lock nut and washer at XX mm side EA 1,810.00
(XX-size of reducer shall be decided during detail engg)
33.2 240V AC, 6A/16A, 1way- single pole Switch and Socket (2P+E)- 2 gang Set 69.00
34 Industrial Sockets -
34.1 Industrial Surface mounted type 240V AC ,16A ,2P+E scocet, with mounting box, EA 64.00
suitable for Outdoor installation
Welding Power Socket 415V AC, 63A, 3P+E with Interlocked plug & switch with earthing
34.2 EA 2.00
contact; provided with Metal gasketed construction suitable for outdoor installation
Welding Ex Proof Power Socket 415V AC, 63A, 3P+E with Interlocked plug & switch
34.3 with earthing contact; provided with Metal gasketed construction suitable for outdoor EA -
installation
34.4 Welding Power Socket 415V AC, 125A, 3P+E with Interlocked plug & switch with -
EA
earthing contact; provided with Metal gasketed construction suitable for outdoor installation
34.5 Welding Power Socket 415V AC, 250A, 3P+E with Interlocked plug & switch with -
EA
earthing contact; provided with Metal gasketed construction suitable for outdoor installation
38.3 50mmX6mm (Lightning protection material i.e. horizontal & down conductor included) M 3,827.50
60.32 0.6/1.1kV,Al,XLPE-4Cx M -
61 Control Cable
61.1 M
61.2 M
61.4 M
61.5 M
4C X 4 Sq.mm 30,000.00
61.6 M
4C x 6 Sq.mm 8,500.00
61.7 M
4C x 10 Sq.mm 4,900.00
62.2 M
63 FO Cable
63.1 FO Cable M 35,000.00
63.2 Termination Point Nos. 50.00
63.4 FDF / LIU Nos. 50.00
64 Cable Termination (Power , Control , FO)
64.1 Cable Gland EA 2,000.00
64.2 Termnal Lug (Over 240SQ) EA 3,500.00
64.3 Cable Cleat EA 2,000.00
65 HT Cable Terminal Kit
65.1 11/11kV, AL, XLPE, Armoured 1C x 630 Sq.mm Cable (Indoor type with 2 hole lug) ea 98.00
65.2 11/11kV, AL, XLPE, Armoured 3C x 240Sq.mm Cable (Indoor type with 2 hole lug) ea 79.00
65.3 3.3/3.3kV, AL, XLPE, Armoured 1C x 630Sq.mm Cable (Indoor type with 2 hole lug) ea 12.00
65.4 3.3/3.3kV, AL, XLPE, Armoured 1C x 300Sq.mm Cable (Indoor type with 2 hole lug) ea 6.00
65.5 3.3/3.3kV, AL, XLPE, Armoured 3C x 240Sq.mm Cable (Indoor type with 2 hole lug) ea 51.00
PADO
2.1.10 OWS, EWS, Server including related furniture & mini UPS ea 6.00
2.1.11 Printer including related furniture ea 2.00
HART Management System
2.1.12 OWS including related furniture & mini UPS ea 2.00
2.1.13 Printer including related furniture ea 2.00
Misc items
2 Test
2.1 All test for above eqipments as per Owner (UPRVUNL & NTPC) Requiremnts Lot 1.00
3 Manpower Supply for Pre-Commissioning/Commissioning Man-Month 100.00
4 Consumable Material (Insulation tape, welding rod, touch up paint. Steel Structure) Lot 1.00
G Total
Labor Cost REMARKS
Unit Amount
275 MVA-:
- TOTAL WEIGHT-: 263 TON
TOTAL OIL-: 57500 LITERS
275 MVA-:
- TOTAL WEIGHT-: 263 TON
TOTAL OIL-: 57500 LITERS
275 MVA-:
- TOTAL WEIGHT-: 263 TON
TOTAL OIL-: 57500 LITERS
275 MVA-:
- TOTAL WEIGHT-: 263 TON
TOTAL OIL-: 57500 LITERS
275 MVA-:
- TOTAL WEIGHT-: 263 TON
TOTAL OIL-: 57500 LITERS
275 MVA-:
- TOTAL WEIGHT-: 263 TON
TOTAL OIL-: 57500 LITERS
275 MVA-:
- TOTAL WEIGHT-: 263 TON
TOTAL OIL-: 57500 LITERS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
40 MVA-:
- TOTAL WEIGHT-: 82000 KG
TOTAL OIL-: 25000 LITERS
40 MVA-:
- TOTAL WEIGHT-: 82000 KG
TOTAL OIL-: 25000 LITERS
40 MVA-:
- TOTAL WEIGHT-: 82000 KG
TOTAL OIL-: 25000 LITERS
40 MVA-:
- TOTAL WEIGHT-: 82000 KG
TOTAL OIL-: 25000 LITERS
-
-
-
-
100 MVA-:
- TOTAL WEIGHT-: 225000 KG
TOTAL OIL-: 70000 LITERS
100 MVA-:
- TOTAL WEIGHT-: 225000 KG
TOTAL OIL-: 70000 LITERS
-
-
-
-
-
333 MVA-:
- TOTAL WEIGHT-: 244.5 TONS
TOTAL OIL-: 65000 LITERS
333 MVA-:
- TOTAL WEIGHT-: 244.5 TONS
TOTAL OIL-: 65000 LITERS
333 MVA-:
- TOTAL WEIGHT-: 244.5 TONS
TOTAL OIL-: 65000 LITERS
333 MVA-:
- TOTAL WEIGHT-: 244.5 TONS
TOTAL OIL-: 65000 LITERS
333 MVA-:
- TOTAL WEIGHT-: 244.5 TONS
TOTAL OIL-: 65000 LITERS
333 MVA-:
- TOTAL WEIGHT-: 244.5 TONS
TOTAL OIL-: 65000 LITERS
333 MVA-:
- TOTAL WEIGHT-: 244.5 TONS
TOTAL OIL-: 65000 LITERS
-
63 MVAR-:
- TOTAL WEIGHT-: 94 TONS
TOTAL OIL-: 24200 LITERS
63 MVAR-:
- TOTAL WEIGHT-: 94 TONS
TOTAL OIL-: 24200 LITERS
63 MVAR-:
- TOTAL WEIGHT-: 94 TONS
TOTAL OIL-: 24200 LITERS
-
110 MVAR-:
- TOTAL WEIGHT-: 141500 KG
TOTAL OIL-: 40000 LITERS
110 MVAR-:
- TOTAL WEIGHT-: 141500 KG
TOTAL OIL-: 40000 LITERS
110 MVAR-:
- TOTAL WEIGHT-: 141500 KG
TOTAL OIL-: 40000 LITERS
-
125 MVAR-:
- TOTAL WEIGHT-: 184 TON
TOTAL OIL-: 58000 LITERS
63 MVAR-:
- TOTAL WEIGHT-: 132 TON
TOTAL OIL-: 47200 LITERS
63 MVAR-:
- TOTAL WEIGHT-: 132 TON
TOTAL OIL-: 47200 LITERS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- All Test for Before Energizing SWGR
- All Test for Before Energizing SWGR
- All Test for Before Energizing SWGR
- All Test for Before Energizing SWGR
- All Test for Before Energizing SWGR
- All Test for Before Energizing SWGR
- All Test for Before Energizing SWGR
- All Test for Before Energizing SWGR
- All Test for Before Energizing SWGR
10 MVA-:
TOTAL WEIGHT-: 20350 KG
- TOTAL OIL-:4100 LITERS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
The meaning of accessories for cable tray
shall be joint connector, blind end, hold
clamp, suspension, post base, fixed clamp,
insert plate, connector, separator, ground
- bonding jumper, rod and coupling,
bolt/nuts(Including anchor bolt) , C
channel , angle, insert Cable Tray Cover,
Cable Tray Numbering and etc.
Installation costs for accessories should be
included in each Tray Item
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
The meaning of accessories shall be anchor
bolt, reducer, nut, washer, hook, U-bolt,
threaded rod, suspension chain, U-bolt,
- pipe saddle, reducer, sealing fitting and etc.
Installation costs for accessories should be
included in each lighting and small power
system item
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
The meaning of accessories for earthing
shall be anchor, screw, compression lug, Etc.
- Installation costs for accessories should be
included in each earthing and lightning
Item
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- 880Nos. of Battery Cell for both unit
-
-
-
-
-
-
- 1180Nos. of Battery Cell for both unit
-
-
-
-
-
-
-
- 120Nos. of Battery Cell for both unit
-
-
-
-
-
-
-
- 120Nos. of Battery Cell for both unit
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Armoured Include Termination Work and
Cable Tie, Numbering, Heat Shrinkable Tube
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
The meaning of Fire Stop & Accessories
for Set Anchor, Hex Nut, Bolt Washer,
- Screw,ETC
Relevant works with Costs for above
should be included in Contractor's scope
of work
-
-
-
-
-
-
Earthing, Road Lighting, High Mast, CCTV,
- Embedded Conduit, Etc
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
The meaning of Accessories for Cable
shall be for Cable Terminal Lug, Cable
tie, cable marker, Heat Shrinkable
Tube, Rubber Strip, Insulation tape
- and Etc.
Relevant works with Costs for above
should be included in Contractor's
scope of work
-
-
-
-
-
-
-
-
-
-
VMS cable BOM is part of sr no:-
2.1.22-2.1.27
-
-
-
-
-
-
- Foundation size:-
350(W)X350(D)X100(H)
- Foundation size:-
350(W)X350(D)X100(H)
- Foundation size:-
350(W)X350(D)X100(H)
-
- Foundation size:-
350(W)X350(D)X100(H) for 6 TT/JB
-
only
-
- Foundation size:-
350(W)X350(D)X100(H)
- Foundation size:-
350(W)X350(D)X100(H)
- Foundation size:-
350(W)X350(D)X100(H), Outdoor
- Foundation size:-
350(W)X350(D)X100(H), Outdoor
- Foundation size:-
350(W)X350(D)X100(H), Outdoor
-
Accessorry for Cable shall be cable gland,
terminal lug, cable tie, cable marker,
- numbering, heat shrinkable tube, clamp,
and etc.
Installation costs for accessories should be
included in each cable Item
-
-
-
-
-
-
-
-
-
- Inculeded
-
- Inculeded