Академический Документы
Профессиональный Документы
Культура Документы
Left Click
Left Click
Select the
1.2.2 Install the Skype soft ware and register the new account(same as above on server
side)
Left Click
Alias List
List of created scenarios (Call Scripts)
AutoCall Scenario
Scenarios selected among the Alias list to be used during the current auto call automation session.
Left click
1
2
4
3
5
Figure 2.2 : Example of designate VOIP connection info and call timers
- UDP Port: Fill the port No. which Skype used UDP port(it is important to the setting)
- Measurement Method
- Type:
- File
- Original file (MOS testing sample file)
- Play and wait time(ms) (During the testing, the interval between play the files)
Normally within 5000ms
4 Call Timer
Idle Time
UE recess interval before start next Call
Setup Time
Timer for establishment of PPP connection (DUN)
T_Setup Time
Timer for logging to a target server (FTP, Ping, HTTP and so forth)
If Timer expires without successful access to the target Call, Traffic Setup Fail will be made in call
result.
Total Setup Time
Either “Setup time and Traffic Setup Time” or “Total Setup” time can be defined.
Traffic Time
Timer for downloading/uploading a file from/to VOIP server or opening target HTTP web site. If Timer
expires without completing downloading/uploading a file from/to VOIP server or opening HTTP web
site, Time Out will be made in call result.
In case of Ping Call, it is ignored.
Call Count
How many times Call test are performed
Total Time [ms]
Total time of a call, i.e. the UE will initiate a new call every Total time in ms, whatever call event has
happened within this time interval. This value has to be larger than the sum of Idle Time, Setup Time
and Traffic Time.
After setting done, the XCAL-W can run the Skype automatically in next time.