Академический Документы
Профессиональный Документы
Культура Документы
In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2014
TI-P001-07
CH Issue 5
9
5
20
10
Pressure bar g 8
12
This product must not be used in this region.
11
Body design conditions PN25
PMA Maximum allowable pressure 25 bar g @ 120°C
16
TMA Maximum allowable temperature 100°C @ 17 bar g
14
Minimum allowable temperature 0°C
PMO Maximum operating pressure 14 bar g @ 75°C
TMO Maximum operating temperature 75°C @ 14 bar g 15
Minimum operating temperature 0°C 13
Note: For lower operating temperatures consult Spirax Sarco
18
DPMX Maximum differential pressure is limited to the PMO
Maximum recommended turndown ratio 10:1 at maximum flow
17
Designed for a maximum cold hydraulic test pressure of 38 bar g
Note: With internals fitted, test pressure must not exceed 17 bar g
19
D
7
Spring housing
hex. bolts
Pressure
adjustment
spring
B F Withdrawal
distance
9
A Bellows assembly
5
6 6
Safety information, installation and maintenance 6
For full details see the Installation and Maintenance Instructions
(IM-P001-08) supplied with the product. 20
Installation note: 11
The valve should be installed in a horizontal pipeline with the
direction of flow as indicated by the arrow on the valve body. 12 12
Valve
How to order and seat
Example: 1 off Spirax Sarco ½" LRV2S pressure reducing valve assembly
with gunmetal body, screwed BSP connections, stainless steel Gasket set
bellows and fitted with an orange spring for downstream pressure
control of 3.5 to 8.6 bar g.
Please note that the only certification that is available for this
product is a manufacturer's Typical Test Report. Note: All 13, 14, 15
certification / inspection requirements must be stated at the
time of order placement. 18
16