Академический Документы
Профессиональный Документы
Культура Документы
UNIVERSITY, PUNE
SEMESTER I
SEMESTER II
SEMESTER-III
SEMESTER-IV
SEMESTER-V
SEMESTER-VI
SEMESTER-VII
Elective-I Mechatronics
Digital Image Processing
Embedded System Design
Elective-II
Software Defined Radio
PLC and Automation
Electronics Product Design
Artificial Intelligence
Elective-III
Multi rate and Adaptive DSP
Wireless Network
Optical and satellite communication
MEMS Technology
Speech processing
Elective-IV
Audio video engineering
Robotics
Soft Computing
Mobile communication
RF Circuit Design
Elective-V Biomedical Signal Processing
Renewable Energy Systems
Open Electives
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
MATRICES (9)
Rank, Normal Form, System of Linear Equations, linear Dependence and Independence And Orthogonal
Transformations, Eigen Vectors, Cayley – Hamilton Theorem , Application to problems in Engineering (Translation and
Rotation of Matrix
TEXT BOOKS
1. Erwin Kreyszig, “Advanced Engineering Mathematics”, Wiley Eastern Ltd, 10th edition .
2. Maurice D. Weir, Joel Hass, Frank R. Giordano, “Thomas’ Calculus”, Pearson Education, 12th edition, .
REFERENCES
1. Serge Lang, “Linear Algebra”, Springer, 3rd edition, .
2. Howard Anton and Chris Rorres, “Elementary Linear Algebra”, John Wiley and Sons, 10th edition, .
3. C.R. Wylie, “Advanced Engineering Mathematics”, McGraw Hill Publications, New Delhi, .
4. Peter V. O’ Neil, Advanced Engineering Mathematics, Thomson Brooks/Cole, Singapore, 7th edition .
5. Shanti Narayan, “Differential Calculus”, S. Chand and Company, New Delhi, .
6. George Simmons, “Differential Equation with Applications”, , .
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
TEXT BOOKS
1. Arther Beiser, “Concepts of Modern Physics”, Tata Mcgraw Hill, 1994.
2. John Buck,“Fundamentals of Optical Fibers”, , 2004.
3. Avadhanulu M N and Kshir Sagar P G, “A Text Book of Engineering Physics”, 2010.
REFERENCES
1. Hecht E, “Optics”, Pearson Education, 2017.
2. Sulabha K. Kulkarni, “Nanotechnology: Principles and Practices”, Springer, 2015.
3. Godfrey Boyle, “A Renewable Energy: Power sustainable future”,Oxford University Press, UK, 2012.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
ORGANIC POLYMERS
(9)Classification of polymers - types of polymerization reactions - mechanism of polymerization, properties of
polymers - strength, dissolution, elasticity and crystallinity -Preparation and properties of important resins: Polystyrene,
PVC, PMMA, Polyester, Teflon, Bakelite and Epoxy resins –Elastomers, Engineering polymers, compounding of
plastics -moulding methods - injection, extrusion, Fibre reinforced plastics.
TEXTBOOKS
1. S. S. Dara, “A Textbook of Engineering Chemistry”, S.Chand & Company Ltd.,15th edition, New Delhi, .
2. O.P.Vermani & A.K.Narula, “Applied Chemistry Therory & Practical”,.
REFERENCES
1. H. V. Keer, “Principles of Solid State”, Wiley Publication, .
2. V. Gowarikar, N.V.Vishwanathan and Jaydev Shreedhar, “Polymer Science”, Wiley Publications.
3. H.H. Uhlig and R.W. Revie, “Corrosion and its Control”, Wiley Publications,4th Edition,.
4. A. I. Vogel, “A Textbook of Quantitative Inorganic Analysis”, Longman Publication Ltd, 4th Edition, 2000.
5. Shashi Chawla, “Essentials of Experimental Engineering Chemistry”, Dhanpat Rai & Co. Delhi, 2001.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Classification of network, Ohm's law, KCL, KVL, network simplification using star-delta / delta-star transformations
mesh analysis, network theorems (Superposition, Thevenin, Norton, Maximum power transfer theorems).
Electromechanical energy conversion: Types of ac and dc motors, Characteristics and applications, ac generators.
Single phase transformer: Construction, principle of working, emf equation, ratios, regulation, losses, efficiency,
condition for maximum efficiency, O.C & S.C. test. Introduction to auto-transformer and instrument transformer. Three
Phase supply: concepts and benefits.
PN Junction diode: characteristic and analysis, Types of diodes – Zener diodes, Photodiodes, Light emitting diodes
(LED’s), Varactor diodes and tunnel diodes,
Rectifiers: Half wave, Full wave and Bridge rectifier circuits and their analysis, Clippers and Clampers. BJT, types,
construction, configurations and characteristics.
Introduction, digital signals, Basic logic gates and universal gates: AND, OR, NOR, NOT, NAND, EX-OR, EX-NOR,
Boolean algebra up to three variables, Optimized implementation of logic functions: K map up to three variables,
minimization of SOP, POS, Arithmetic circuits: Half Adder, Full Adder, Subtractor, Flip flops: Basic latch, Gated SR,
JK flip flop, D flip flop, T flip flop, Introduction to Shift registers and Counters. Basic difference between processor and
controllers.
TRANSDUCERS (9)
Definition, Classification, Selection criteria, Sources of error for parameter under measurement, Transducer
specifications, Ultrasonic transducer, Temperature transducer, Linear variable differential transducer, Strain gauge.
Various applications of transducers.
Text Books:
1. V. N. Mittle and Arvind Mittal “Basic Electrical Engineering” Tata McGraw Hill, (Second Edition)
2. Edward Hughes “Electrical and Electrical Technology”, Pearson Education (Tenth edition)
References:
1. V.K.Mehta and Rohit Mehta, “Principles of Electronics”, S.Chand Publication
2. R.P.Jain, “Modern Digital Electronics” Tata McGraw Hill (Second edition).
3. A.P. Malvino, D.P. leach, G. Saha, “Digital principles and Applications”, Tata McGraw Hill, (Seventh edition).
4. H. S. Kalsi, “Electronics Instrumentation” Tata McGraw Hill.
5. B.L.Theraja “Fundamentals of Electrical Engineering and Electronics”, S.Chand (Reprint 2015)
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
TEXT BOOKS
1. E. Balguruswamy, “Programming in ANSI C”, Tata Mc-Graw Hill
2. “Programming With C”, Schaum Series Reference Books
REFERENCE BOOKS
1. Stephen G. Krantz, “Problem Solving Techniques” , Universities Press.
2. Kernighan and Ritchie, “The ‘C’ programming language”, Prentice Hall
3. V. Rajaraman, “Computer Programming in ‘C’”, Prentice Hall
4. R.G. Dromey, “How to solve it by Computer”, Pearson Education.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
TERM WORK:
TEXT BOOKS
1. N. D. Bhatt, “Elementary Engineering Drawing”, Chartor Publishing house, Anand, India.
2. D. N. Johle, “Engineering Drawing”, Tata Mcgraw-hill Publishing Co. Ltd.
3. K. L. Narayana and P. Kannaiah,”Textbook on Engineering Drawing”, Scitech Pub, 2010.
REFERENCE BOOKS
1. P. S. Gill, “Engineering Graphics”, S K Kataria and Sons, Reprint 2013 edition (2013)
2. N. D. Bhatt, “Machine Drawing”, Chartor Publishing House, Anand, India.
3. Warren J. Luzzader, “Fundamentals of Engineering Drawing”, Prentice Hall of India, New Delhi.
4. Fredderock E. Giesecke, Alva Mitchell & others, “Principles of Engineering Graphics”, Maxwell McMillan
Publishing.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
TEXTBOOK
1. Monograph prepared by the Faculty, Department of English, in 2012.
REFERENCE BOOKS
1. Dorothy E Zemach and Lynn Stafford Yilmaz, “Writers at Work: The Essay”, Cambridge University Press,
Cambridge, 2008.
2. Aysha Viswamohan, “English for Technical Communication”, Tata Mc-Graw – Hill Publishing Company Ltd., New
Delhi, 2008.
3. Mark Ibboston,”Cambridge English for Engineering”, Cambridge University Press, UK, 2011.
4. E. Suresh Kumar and P. Sreehari, “A Handbook for English Language Laboratories”, Osmania University,
Hyderabad, 2011.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
ASSIGNMENT
1. Safety in workshop e.g fire safety, electric shock, machine protection etc.
2. Write a procedure of any one job manufacturing.
3. To Study and practice the various operations that can be performed in
Lathe, drilling, milling machines etc.
.
17BTPY111: Physics Laboratory 0021
CA : 40 Marks FE : 60 Marks
LIST OF EXPERIMENTS
GROUP A: Essential Prerequisites (Compulsory)
1. Use of Eclipse Editor for creating C projects. (1 hr)
2. Using Eclipse Write “Hello World” program in C. (1hr)
TEXTBOOK
1. Donald E. Knuth, “The Art of Computer Programming”, Vols. 1, Addison-Wesley, ISBN-13: 978-0201485417,
ISBN-10: 0201485419
2. T. E. Bailey, “Program design with pseudo code”, Brooks/Cole Publisher, ISBN-10:0534055745, ISBN-13: 978-
0534055745
3. Brian W. Kernighan, Dennis M. Ritchie, “The C Programming Language”, Prentice Hall, ISBN 0131103628,
Second Edition.
REFERENCE BOOKS
1. Lamey Robert, “Logical problem solving”, Prentice Hall, ISBN: 9780130618825
2. Herbert Schildt, “C/C++ Programmer's Reference”, McGraw-Hill, ISBN-13: 978-0072127065, ISBN-10:
0072127066
3. Henry Mullish , Herbert L. Cooper, “The Spirit of C”, Thomson Learning, ISBN 0314285008
4. Carlo Ghezi, Mehdi Jazayeri, “Programming Language Concepts”, John Wiley and Sons, ISBN 0471104264,
Third Edition
5. CDAC: BOSS GNU/Linux User's Manual
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
TEXT BOOKS
1. Erwin Kreyszig, “Advanced Engineering Mathematics”, Wiley Eastern Ltd, 10th edition .
2. Maurice D. Weir, Joel Hass, Frank R. Giordano, “Thomas’ Calculus”, Pearson Education, 12th edition, .
REFERENCES
1. Calculus for Scientists and Engineers by K.D Joshi, CRC Press.
2. A Course in Calculus and Real Analysis (1st edition) by Sudhir Ghorpade and Balmohan Limaye, Springer-Verlag,
New York.
3. Advanced Engineering Mathematics by C.R. Wylie, McGraw Hill Publications, New Delhi.
4. Advanced Engineering Mathematics (7th edition) by Peter V. O’ Neil, Thomson. Brooks / Cole, Singapore.
5. Differential Calculus by Shanti Narayan, S. Chand and company, New Delhi
6. Differential Equation with Applications By George Simmons
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
INTRODUCTION (9)
Introduction to Algorithms, Complexities and Flowchart, Introduction to Programming, Categories of Programming
Languages, Program Design, Programming Paradigms, Characteristics or Concepts of OOP, Procedure Oriented
Programming VS object oriented Programming.
Introduction to C++: Character Set, Tokens, Precedence and Associativity, Flow chart, Program Structure, Data
Types, Variables, Operators, Expressions, Statements and control structures,I/O operations.Objects interaction,
Classes, Hierarchies of classes,Inheritance,Polymorphism,Abstract classes. Array, Functions Objects, Objects as
software modules
TEXT BOOKS
1. Deitel and Deitel, “C++ How to Program”, Sixth Edition, Prentice Hall,2007.(UNIT 1,2,3)
2. Herbert Schildt, “Java The complete reference”, Eighth Edition, McGraw Hill Professional, 2011.(UNIT 4,5)
REFERENCE BOOKS
1. Balagurusamy E., “Object oriented programming with C++”,Fifth Edition, Third Reprint, Tata McGraw–Hill
Education , 2011.
2. Ira Pohl, “Object Oriented Programming using C++”, Pearson Education, Second Edition, Reprint 2004.
3. Lippman S. B., Josee Lajoie, Barbara E. Moo, “C++ Primer ”, Fourth Edition, Pearson Education, 2005.
4. ISRD Group, “Introduction to Object–oriented programming throughJava”,Tata McGraw–Hill Publishing Company
Ltd., 2007.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
JFET (8)
Introduction to JFET, Types, Working Construction, Operation, Static Characteristics, Pinch off voltage, FET Volt-
Ampere characteristics, Small signal model. FET Configurations (CS/CD/CG) and their Comparison. Biasing of FET
(Self). FET as an amplifier and its analysis (CS) and frequency response
TEXT BOOKS
1. Millman Halkias, “Integrated Electronics-Analog and Digital Circuits and Systems”, Tata McGrawHill, 2000.
rd
2. Donald Neaman, “Electronic Circuit Analysis and Design”, , Tata McGraw Hill, 3 Edition.
REFERENCE BOOKS
Reading Comprehension: Critical, inferential, analytical, and interpretative Reading tasks – reading texts from
different genres- assessment components modeled on IELTS, TOEFL, & GRE examinations.
Language Focus – Writing: Context based Syntax, vocabulary, and special language functions like idioms and
phrases, connectives, style, Tone, and emphasis techniques- academic and professional writing- describing visual
information like graph/table/chart/diagram- drafting letters, emails, mini- reports
Professional Communication –Oral Skills: Principles of group communication, interviewing, and making
presentations- group discussions, role plays, mock interviews- talking about some visual information- giving and
receiving instructions.
Soft Skills: Intrapersonal communication- developing self-concept, handling Perceptual differences, Demonstrating
Positive attitude, body language Interpersonal Skills- Team spirit, Body Language, Business etiquette, Negotiation
skills.
Writing Coherent Project Report: Overview structure of reports, gathering informations - synopsis / abstract - title –
headings – table of contents – list of figures – list of tables – list of appendices – chapters – structured paragraphs –
inferences, conclusions – figures – tables – flow charts – complete design (headers and footers).-Plagiarism.
Each student will be required to submit a technical report based on the guidelines provided by the department.
Project Presentation: Each student will be required to make one technical presentation for minimum 15 minutes
duration in this course. Individual topics will be assigned to the students by the department.
REFERENCE BOOKS
1. A) Write a C++ program to print the given number in reverse order. Use functions with return type and without
return type for reversing the number.Ex: given number is 2345 , output should be 5432
B) Write a C++ program to find the sum of factorial of a given number using recursive function.
2. The customers of the Maharashtra State Electricity Board are charged depending on the number of units
consumed. The electricity tariff is calculated as follows:
In addition to above every person has to pay Rs75 as service charge per month. Write a program in C++ using
control structures to calculate the Electricity bill.
3. Design a base class with name,date of birth,blood group and another base class consisting of the data members
such as height and weight.Design one more base class consisting of the insurance policy number and contact
address.The derived class contains the data members’ telephone numbers and driving license number. Write a
menu driven program to carry out the following things:
i. Build a master table
ii. Display
iii. Insert a new entry
iv. Delete entry
v. Edit
vi. Search for a record
4. Write a C++ program to explain virtual function (polymorphism) by creating a base class c_polygon which has
virtual function area(). Two classes c_rectangle and c_traingle derived from c_polygon and they have area() to
calculate and return the area of rectangle and triangle respectively.
5. Write a program to explain class template by creating a template T for a class named pair having two data
members of type T which are inputted by a constructor and a member function get-max() return the greatest of
two numbers to main. Note: the value of T depends upon the data type specified during object creation.
6. Write a C++ program that creates an output file, writes few records into it, closes the file and open it again as an
input file and read the information from the file.
7. Write a C++ program to DrawingLine using DDA algorithm Also Draw patterns such as simple, dash, dash dot,
thick.
8. Write a C++ program to DrawingLine usingBresenhamAlgortihm.Also Draw patterns such as simple, dash, dash
dot, thick.
9. Write a C++ program to Circle Drawing using DDA, Midpoint circle drawing Algorithms.
10. Writea C++ program to Circle Drawing using BresenhamAlgorihtms with key board/Mouse interface.
11. Write a C++ program to Polygon filling using i) Non Recursive Seed Fill / Flood Fill with implementation of inside
test
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
12. Write a C++ program to Polygon filling using Scan Line algorithm with Pattern Filling
13. Write a C++ program to2 D Clipping using i) Line Clipping – Cohen Sutherland Outcode Method
14. Write a C++ program to2 D Clipping using Sutherland Hodgman Polygon Clipping.
15. Write a C++ program 2 D Transformations to Implement Simple Translation ii) Scaling, rotation about origin.
16. Write a C++ program 2 D Transformations to Implement Scaling, Rotation about arbitrary point
TEXTBOOKS
1. S. Harrington, “Computer Graphics”, 2nd Edition, McGraw-Hill Publications, 1987, ISBN 0 – 07 – 100472 – 6.
2. D. Rogers, “Procedural Elements for Computer Graphics”, 2nd Edition, Tata McGraw-Hill Publication, 2001, ISBN
0 – 07 – 047371 – 4.
3. Deitel and Deitel, “C++ How to Program”, Sixth Edition, Prentice Hall, 2007.(UNIT 1,2,3)
4. Herbert Schildt, “Java The complete reference”, Eighth Edition, McGraw Hill Professional, 2011.(UNIT 4,5)
REFERENCE BOOKS
1. J. Foley, V. Dam, S. Feiner, J. Hughes, “Computer Graphics Principles and Practice”, 2nd Edition, Pearson
Education, 2003, ISBN 81 – 7808 – 038 – 9. 2.
2. D. Hearn, M. Baker, “Computer Graphics – C Version”, 2nd Edition, Pearson Education, 2002, ISBN81 – 7808 –
794 – 4. 3.
3. D. Rogers, J. Adams, “Mathematical Elements for Computer Graphics”, 2nd Edition, Tata McGraw-Hill
Publication, 2002, ISBN 0 – 07 – 048677 – 8.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Text Books:
1. Thomas’ Calculus (12th edition) by Maurice D. Weir, Joel Hass, Frank R. Giordano, Pearson
Education.
2. Advanced Engineering Mathematics (10th edition ) by Erwin Kreyszig, Wiley eastern Ltd
Ronald E, Walpole, Sharon L. Myers, Keying Ye, Probability and Statistics for Engineers and
Scientists (8th Edition), Pearson Prentice Hall, 2007
Reference Books:
1. Calculus for Scientists and Engineers by K.D Joshi, CRC Press.
A Course in Multivariate Calculus and Analysis by SudhirGhorpade and BalmohanLimaye,
2. Springer Science and Business Media.
Differential Equations with Applications and Historical notes by George Simmons, Tata Mc-Graw Hill
publishing company Ltd, New Delhi.
3. Advanced Engineering Mathematics by C.R. Wylie, McGraw Hill Publications, New Delhi.
4. Advanced Engineering Mathematics (7th edition ) by Peter V. O’ Neil, Thomson.Brooks /
Cole, Singapore.
5. Advanced Engineering Mathematics (2nd edition) by Michael D. Greenberg, Pearson Education
6. S. P. Gupta, Statistical Methods, S. Chand & Sons, 37 th revised edition, 2008
7. William W. Hines, Douglas C. Montgomery, David M. Goldsman, Probability and Statistics for
Engineering, (4th Edition), Willey Student edition, 2006.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Transistor Hybrid Model, Small Signal Amplifier, Performance in terms of h-parameters, exact analysis of BJT CE,
Comparison of CE, CC & CB Amplifier’s performance parameters.Frequency Response of an Amplifier, Low-Frequency
Response of an RC-Coupled Single Stage CE Amplifier. The Hybrid-π Common-Emitter Transistor Model, Gummel
Poon model, generalized high frequency response.
JFET as an amplifier and its analysis - D.C and A.C (CS configuration),frequency response.Non-ideal voltage current
characteristics of EMOSFET. Biasing of EMOSFET Common source circuit, Load Line &Modes of operation, DC
Analysis, constant current source biasing.Small Signal Parameters, Small Signal Equivalent Circuit, Analysis of CS
amplifier. E-MOSFET internal capacitances and high frequency model, BiCMOS technology
Analysis of Cascaded RC Coupled BJT amplifiers, Cascode Amplifier, Darlington Pair, Different Coupling Schemes
used in Amplifiers - RC Coupled Amplifier, Transformer Coupled Amplifier,Direct Coupled Amplifier,Tuned Amplifiers:
Tuned Voltage Amplifier, stagger tuned and double tuned amplifiers, Class- C Amplifier, RF Amplifiers.
The Feedback Concept, The Transfer gain with Feedback, General Characteristics of Negative-Feedback Amplifiers,
Topologies of Negative-Feedback, Summery of Effect of Negative-Feedback on Gain, Input Resistance , Output
Resistance & Bandwidth of Amplifier, Sinusoidal Oscillators, The Transistor Phase-Shift Oscillator, A General form of LC
Oscillator Circuit, RC Phase Shift oscillator, Wein bridge oscillator, Hartley and Colpitts oscillators
Power BJTs, Classification of Amplifies, Class A Large-Signal Amplifiers, Second –Harmonic Distortion, The
Transformer-Coupled Audio Power Amplifier & it’s Efficiency, Class B Amplifiers, Class B Push-Pull & Complementary-
Symmetry Amplifier, Class AB Operation
TEXT BOOKS:
1. MillmanHalkias, “Integrated Electronics-Analog and Digital Circuits and Systems”, TataMcGrawHill, 2000.
rd
2. Donald Neaman, “Electronic Circuit Analysis and Design”,3 Edition, Tata McGraw Hill.
REFERENCE BOOKS:
th
1. David A. Bell,“ElectronicDevices and Circuits”,5 Edition, Oxford press
2. R. L. Boylstad, L. Nashlesky, “Electronic Devices and Circuits Theory”,9thEdition, PrenticeHall of India, 2006.
3. Introductory Electronic Devices and Circuits– Robert T. Paynter, 7 ed., 2009, PEI.
4. Electronic Devices and Circuits - S. Salivahanan, N.Suresh Kumar, AVallavaraj, 2 ed.,
2009, TMH.
5. Sedra Smith, “Microelectronics Circuits, 5th Edition, Oxford, 1999
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Continuous Time & Discrete Time domain signal of LTI System (8)
System modeling: Input-output relation, Definition of impulse response, convolution sum, convolutionintegral,
computation of convolution integral using graphical method for unit step to unit step, unit stepto exponential,
exponential to exponential, unit step to rectangular and rectangular to rectangular only.Computation of convolution
sum. Properties of convolution. system interconnection, system propertiesin terms of impulse response, step response
in terms of impulse response.
.
Continuous Time Fourier series (8)
Fourier series (FS) representation of periodic CT signals, Dirichlet condition for existence of Fourierseries,
orthogonally, basis functions, amplitude and phase response, FS representation of CT signalsusing trigonometric and
exponential Fourier series. Applications of Fourier series, properties of flourierseries and their physical significance,
Gibbs phenomenon, Discrete Time Fourier Series, properties,introduction to DTFS.
Reference Books
1. M.J. Roberts “ Signal and Systems”, Tata McGraw Hill 2007
2. ShailaApte, “ Signals and Systems-principles and applications”, Cambridge University press, 2016
3.Mrinal Mandal and Amir Asif, Continuous and Discrete Time Signals and Systems, Cambridge
university Press, 2007
4. Peyton Peebles, “Probability, Random Variable, Random Processes”, 4 th Edition, Tata Mc Graw Hill.
5. M. J. Roberts and Govind Sharma, “Fundamentals of Signals and Systems”,2nd edition, Mc Graw
Hill,2010
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Introduction to Number Systems – Positional Number Systems, Number System conversion, Binary codes –Binary
arithmetic, Binary logic functions – Switching algebra – Functionally complete operation sets, Reduction of switching
equations using Boolean algebra, Realization of switching function.
Standard representation of logic functions-incompletely specified functions- k map representation of logic functions
(SOP and POS forms)-simplification of logic functions through K-maps and Quine McClusky method - implementation
using logic gates - Decoders, encoders, multiplexers and demultiplexers - implementation of combinational circuits
using multiplexers - Binary/ BCD adders, subtractors- Carry look ahead adder- magnitude comparator – ALU
Characteristics of digital ICs-voltage and current ratings-Noise margin-propagation delay-power dissipation-TTL logic
family-totem pole, open collector and tristate outputs-wired output operations, MOS transistor switches,- NMOS ,
CMOS invertors/ logic gates, multiplexers, ECL logic families, comparison of performance of various logic families-
interfacing TTL and CMOS devices.
General model of sequential circuits- 1 Bit Memory Cell, Clocked SR, JK, MS J-K flip flop, D and T flip-flops.- latches -
level triggering, edge triggering- master slave configuration - Mealy/Moore models - concept of state – state diagram -
state table, state reduction -Design of synchronous sequential circuits -up/down, modulus counters - shift registers –
Shift Register Counters -Ring counter - Johnson counter - timing diagram - sequence detector - synchronous counters,
lock out, Clock Skew, Clock jitter. Effect on synchronous designs- Introduction to Algorithmic state machines-
construction of ASM chart and realization for sequential circuits.
TEXTBOOKS:
1. R.P. Jain, “Modern digital electronics” , 3rd edition , 12threprint Tata McGraw Hill Publication, 2007.
2. M. Morris Mano, “Digital Logic and Computer Design” 4th edition,Prentice Hall of India, 2013.
REFERENCEBOOKS:
1. Anand Kumar, “Fundamentals of digital circuits” 1st edition, Prentice Hall of India, 2001
2. Tocci R J, “Digital Systems: Principles and applications”, Prentice Hall of India,New Delhi, 2009.
3. Tokheim R L, “Digital Electronics - Principles and Applications ", Tata McGraw Hill, New Delhi, 2007.
4. John F Wakerly, “Digital Design Principles and Practices”, Prentice Hall of India, New Delhi, 2005.
5. Donald D Givone, “Digital Principles and Design”, Tata McGraw Hill, New Delhi, 2003.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Analysis of networks:
(10)
Distributed and lumped networks, Practical sources, source transformation, network reduction using Star-delta
transformation, Loop and node analysis with linearly, Dependent and independent sources for DC and AC networks
Analysis of DC CircuitsActive Elements, passive Element, Reference Directions for current and voltage, Kirchoffs
Laws, Voltage and Current Division Nodal Analysis, Source Transformation, MESH Analysis, Linearity and
superposition, Thevinin’s and Norton’s Theorem, Analysis of A.C circuits Superposition's, Reciprocity, Theremin's,
Norton's, Maximum power Transfer , Duality and Millman's theorems.
Graph of network, Concept pf a tree and co-tree, incidence matrix, Tie-se & cut-se schedules, formation of equilibrium
equations in Matrix form, solution of resistive networks, principles of duality. Methods of analysis of linear networks:
nodal-cutset-mesh- and loop-analysis
Behavior of circuit element under switching condition and their represention, evalution of intial and final convolution
integral,application of Unit-step Function to RL, RC and RLC Circuits, Concepts of Natural, Forced and Complete
Response,Transformed RLC circuits for AC and DC excitations
Filters and Attenuators 6L Classifications: Symmetrical and Asymmetrical networks. Properties of two port Network:
Symmetrical Networks (T and only). Z0 and γ in terms of circuit components. Asymmetrical Networks: Image
Impedance and Iterative Impedance (L-Section only). Filters: Filter fundamentals, Constant K-LPF, HPF, BPF and
BSF, introduction to concept of mderived LPF and HPF, Terminating half sections, and composite filters.
Fundamentals of active filter designAttenuators: Introduction to Neper and Decibel. Symmetrical T and type
attenuators.
2-port networks: 2-port parameters, Short ciruit admittance parameters, Open circuit impedance Parameters,
transmission parameters, hybrid parameters relationship between parameters sets, interconnection of 2-
ports and their effect on the parameters, Tellegen'sgeneralized reciprocity theorem.
Multiport and multiterminal networks: their representations and interconnections.
TEXT BOOKS:
REFERENCE BOOKS:
1. Hayt, Kimmerly, Engineering Circuit Analysis, 5th Ed., McGraw Hill, 1993.
2. Desoer C.A. &Kuh E.S., Basic Circuit Theory, McGraw-Hill, 1985.
3. Ryder J.D., Networks, Lines and Fields, Prentice Hall, 2Nd Ed., 1991.
4. B. P. Lathi, Linear Systema and Signals, Oxford University Press, 2 nd Ed., 2006.
5. RoyChoudhary, Network and Systems, Wiley Eastern, 2nd Ed., 1988.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Guidelines:
Project group shall consist of not more than 3 students per group.
Suggested Plan for various activities to be monitored by the teacher.
Week 1 & 2: Formation of groups, Finalization of Mini project & Distribution of work.
Week 3 & 4: Learning basics of Arduino hardware and interfacing.
Week 5 & 6: Learning basics of Arduino software and IDE.
Week 7 & 8: Implementation
Week 9 & 10: Preparation, Checking & Correcting of the Draft Copy of Report
Week 11 & 12: Demo and Group presentations
Project designs ideas can be necessarily adapted from recent issues of electronic designmagazines
Application notes from well known component manufacturers may also be referred.
**Final Lab exam will be conducted with viva-voce of the respective practical (50 exam +10 viva = 60)
11. Generation of test signals like impulse, step, ramp, sine etc. using any open source software/ MATLAB.
12. Perform linear convolution of 4 bit sequence using any open source software/ MATLAB.
**Final Lab exam will be conducted with viva-voce of the respective practical (50 exam +10 viva = 60)
1. Design a single stage BJT/FET in CE/CS configuration and verify DC operating point.
2. Build and Test single stage CE/CS (BJT/FET) amplifier. Calculate Ri, Ro and Av.
3. Simulate frequency response of single stage and Multistage CE/CS amplifierand find the bandwidth.
4. Implement Voltage-Series feedback amplifier and calculate Rif, Rof, Avf and Bandwidth.
5. Simulation of current shunt feedback amplifier and find Rif, Rof and Bandwidth.
6. SimulateWein bridge and RC phase shiftand Hartley /Colpitts oscillator using BJTand calculate output voltage
and frequency.
7. Build and test BJT/MOSFET as a switch.
8. Complementary Symmetry push pull amplifier.
9. Design and implement a simple project on general purpose PCB.
10. Design and testing of Code Converters for BCD to Gray conversion and BCD to Seven segment code conversion
11. Design and testing of Magnitude Comparator
12. Design and testing of Multiplexers/Demultiplexers using gates
13. Design and testing of Shift Registers using D flip-flops
14. Design and testing of Ring Counter and Johnson Counter
15. Design and testing of Asynchronous Counters.
16. Design and testing of Synchronous Counter
17. Design and testing of Sequence Detector
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
TREES (9)
Need for non-linear structures, Basic Tree Concepts, Binary Trees: Concept & Terminologies, Binary Search Trees
(BST): Basic Concepts, BST operations.
Representation of Binary search Tree in memory, traversing a binary Search tree, Searching and inserting in BST,
Deleting from BST, AVL Tree, Applications of Trees: Expression Tree, Game Trees.
GRAPHS (9)
Basic Concepts & terminology, Representation: Adjacency Matrix, Path matrix, Adjacency list. Traversal: Depth First
Search, Breadth First Search. Minimal spanning tree: Kruskal algorithm, Prim’s algorithm, Dijkstra's Shortest Path
Algorithm.
TEXT BOOKS:
1. Ellis Horowitz, SartajSahni, “Fundamentals of Data Structures”, Galgotia Books Source. ISBN:10: 0716782928
2. Richard F. Gilberg&Behrouz A. Forouzan, “Data Structures APseudocode Approach with C”, Cengage Learning,
second edition. ISBN-10: 0534390803
3. Seymour Lipschutz, “Data Structure with C”,Schaum’s Outlines, Tata McGrawHill. ISBN-10: 1259029964
4. E Balgurusamy, “ Programming in ANSI C”, Tata McGraw-Hill, Third Edition. ISBN-10: 1259004619
5. YedidyahLangsam, Moshe J Augenstein, Aaron M Tenenbaum, “Data structures using C and C++”, PHI
Publications, Second Edition ). ISBN 10: 8120311779
REFERENCES
LIST OF TUTORIALS
3104
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Introduction, Types of Control Systems : Open loop & Closed loop , Feed back Control System,
Effect of Feed Back , Modeling of Simple Electrical & Mechanical Systems Using Differential
Equations (Translational only), Concept of Transfer Function , Characteristics Equation, Poles and Zeros , Block
Diagram Reduction Algebra ,Signal Flow Graph, Masson’s gain formula.
Type and Order of the Control Systems , Types of Standard Inputs , Response of First Order System to Step, Ramp
and Parabolic Inputs , Response of Second Order System to Step Input ,
Time Domain Specifications of Second Order Systems, Steady State Error and Error Coefficients, Concept of Stability
Routh-Hurwitz Criterion , Concept of Root Locus, Construction of Root locus.
Need of Frequency Domain Analysis , Correlation between Time & Frequency Domain , Frequency Domain
Specifications , Bandwidth , Bode Plot , Construction of Bode Plot , Gain and Phase Margin , Determination of Relative
Stability , Polar Plot, Nyquist Stability Criterion, Relative Stability Using Nyquist Criterion, Nyquist Plot.
Advantages of State Space Analysis over Classical Control, Concept of State, State Variables and State Model , State
Space Representation using State Model, State Transition Matrix and itsproperties, Solution of State Equations for
homogeneous LTI System , Concept of Controllability and Observability
Introduction to PLC: Block schematic, Specifications of PLC, applicationsof PLC using Ladder diagram.
Introduction to PID, concept of offset, P,PI,PD, PID characteristics
Digital Control Systems; Advantages over analog control system, Sampled Data Control System, Pulse Transfer
function of Digital Control System, Impulse response and Step response.
TEXT BOOKS
1. I.J. Nagrath ,M.Gopal, Control Systems Engineering, Fifth Edition, New Age InternationalPublishers, New Delhi,
2009
2. Katsuhiko Ogata, Modern Control Engineering, Fifth Edition, PHI Learning Private Limited,New Delhi, 2010
REFERENCE BOOKS
1. Schaum’s Outline Series,” Feedback and Control Systems”, Tata McGraw Hill, 2007.
2. Curtis D Johnson, Process Control Instrumentation Technology, Eighth Edition, PHI PrivateLimited, New Delhi,
2011.
3. Richard C. Drof , Robert N. Bishop, Modern Control Systems, Addison Wesley PublishingCompany, 2001.
4. B.C.Kuo, Digital Control Systems, Second Edition, Oxford University Press, New York, 1992.
TUTORIALS
1. Find overall transfer function of the system using block diagram algebra.
2. Find the time domain specifications of the given system.
3. Find the steady state error and error coefficients of the type 0, 1 and 2 systems for step, ramp and parabolic inputs.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
4. Find determine the stability of a system using Routh Hurwitz Criterion, marginal value of Kand frequency of
sustained oscillations.
5. Construct the root locus and comment on the stability.
6. Find frequency domain specifications of the system.
7. Draw Bode Plot, find PM and GM and Comment on the stability. Also, find transfer function of the system from given
Bode plot.
8.Find stability of the system using Nyquist Criteria.
9. Write State space model of the system and solution.
10. Find State Transition Matrix for given system and verify the properties of the same.
11. Develop the ladder diagram for given application.
12. Find pulse transfer function for the given system and obtain the impulse and step response for the same.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Noise: (9)
Introduction, types of noise, white noise, noise equivalent bandwidth, Signal to Noise Ratio, SNR of tandem
connection, Noise Figure, Noise Temperature, Friss’s formula for Noise Figure, Noise Bandwidth, cascade connection
of two port networks, Behaviour of Baseband systems and Amplitude modulated systems i.e. DSBSC and SSBSC in
presence of noise.
TEXTBOOKS:
1. Simon Haykin, “Communication Systems”, 3rd edition, John Wiley, 1996
2. B. P. Lathi, “Modern Digital and Analog Communication Systems”, 3rd edition, Oxford University Press, 2005
REFERENCES:
1. H. Taub, D. L. Schilling, “Principles of Communication Systems” 2nd edition, Mc-Graw Hill, 1986
2. Dennis Roddy &Coolen, “Electronic Communication”, 4th Edition, Prentice Hall.
3. George Kennedy, “Electronic Communication Systems” 5th Edition, McGraw-Hill.
Computer types, Functional units - input unit; output unit; ALU; control unit; memory unit, Basic operational concepts,
Bus structure, Software, Performance – processor clock; basic performance equation; pipelining and superscalar;
operation; clock rate; instruction set: CISC & RISC; Multiprocessors & Multi computers, Historical perspective
(generations of a computer).
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Addition and subtraction of signed binary numbers, Design of fast adders, Multiplication of positive numbers, Signed
Operand Multiplication, Booths Algorithm, Fast multiplication, Integer Division, Floating point Numbers and Operations,
IEEE standards, Floating point arithmetic.
Single Bus Organization - register Transfer; performing an arithmetic or logic operation; fetching and storing word
from/to memory; execution of complete instruction; branch instruction, Multi-bus Organization, Hardwired Control-
Design methods – state table and classical method, A complete Processor, Micro-programmed Control-
microinstructions, micro- program sequencing, wide branch Addressing, microinstructions with next address field,
perfecting microinstructions, emulation.
I/O Organization- accessing I/O devices, Interrupts- interrupt hardware, enabling and disabling interrupts, handling
multiple requests, controlling devices, exceptions, interface circuits, Direct memory access – bus arbitration, Buses-
Synchronous; asynchronous, Interface circuits- parallel; serial, StandardI/O- PCI, SCSI, USB.
Memory Hierarchy, Semiconductor RAM memories- internal organization of memory chips; static memories;
asynchronous and synchronous DRAM; Structure of larger memories, Cache memory, Virtual Memories.
MICROPROCESSOR (6)
Introduction to 8086 – Microprocessor architecture – Addressing modes - Instruction set and assembler directives –
Assembly language programming – Modular Programming - Linking and Relocation Stacks - Procedures – Macros –
Interrupts and interrupt service routines – Byte and String Manipulation.
TEXT BOOKS
1. C. Hamacher, V. Zvonko, S. Zaky, “Computer Organization”, McGraw Hill, 2002, 5th edition.
2. Douglas Hall, “Microprocessors & Interfacing”, McGraw Hill, Revised 2nd Edition, 2006.
REFERENCE BOOKS
1. J. Hays, “Computer Architecture and Organization”, 2nd Edition, McGraw-Hill, 1988 ISBN 0– 07–100479–3
2. Stallings William, “Computer Organization and Architecture: Principles of structure and function”, 2nd Ed, Maxwell
Macmillan Editions, 1990 ISBN 0 – 02 –946297 – 5.
3. John Uffenbeck, “The 8086/88 Family: Design, Programming & Interfacing”, PHI.
4. Liu, Gibson, “Microcomputer Systems: The 8086/88 Family”, 2nd Edition, PHI, 2005.
3104
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Comparator, Zero Crossing Detector, Schmitt Trigger, Voltage Limiters, Clipper and Clampers, Absolute Value
output circuit, Peak Detector, Sample and Hold Circuit, Precision Rectifier – Half/Full Wave, Square, Triangular
and Saw tooth Wave Generator, , sample and holdcircuits
V-F,F-V, DAC: types of DAC, characteristics, specifications, advantages and disadvantages of each type of
DAC Weighted resistor DAC, R-2R ladder network. ADC: types of ADC counter type ADC, successive
approximation ADC, Flash ADC, dual slope ADC, characteristics ,specifications, advantages and disadvantages
of each type of ADC.PLL- basic block diagram and operation, capture range and lock range; applications of PLL
IC 565, AM detection, FM detection and FSK demodulation.
TextBooks:
1. Ramakant A. Gaikwad, “Op Amps and Linear Integrated Circuits”,Pearson Education2000.
2. Salivahanan and KanchanaBhaskaran, “Linear Integrated Circuits”, TataMcGrawHill,India2008
Reference:
1. George Clayton and Steve Winder, “Operational Amplifiers”, 5th EditionNewnes.
2. Sergio Franco, “Design with Operational Amplifiers and Analog IntegratedCircuits”, Tata McGrawHill.
3. Bali,”Linear Integrated Circuits”, McGraw Hill2008.
4. Van Valkenburg, Analog filter design, Oxford Publication
List of Tutorials:
Guidelines:
Project group shall consist of not more than 3 students per group.
Suggested Plan for various activities to be monitored by the teacher.
Week 1 & 2: Formation of groups, Finalization of Mini project & Distribution of work.
Week 3 & 4: Learning basics PCB design software.
Week 5 & 6: Designing circuits and simulating it.
Week 7 & 8: Implementation
Week 9 & 10: Preparation, Checking & Correcting of the Draft Copy of Report
Week 11 & 12: Demo and Group presentations
1. AM Generation (DSB-FC): Calculation of modulation index by graphical method /trapezoidal method, Power of AM
Wave for different modulating signal, Observe Spectrum & BW of AM on Spectrum Analyzer.
2. Envelope Detector - Practical diode detector, Observe effect of change in RC time constant which leads to diagonal
and negative clipping
3. Generation of DSB-SC with the help of Balanced Modulator IC1496/1596, Observe Spectrum & BW of DSBSC on
Spectrum Analyzer, & its detection.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
4. SSB modulator using Filter method/ phase shift method, Observe Spectrum & BW of DSBSC on Spectrum Analyzer
& its detection.
5. Frequency modulator & demodulator using IC 565 (PLL based), calculation of modulation index, Observe Spectrum
on Spectrum Analyzer & BW of FM, Observe Effect of Eigen values on carrier power in FM.
6. Frequency modulator & demodulator using Varicap/Varactor Diode and NE 566 VCO.
7. Measurement of Performance Characteristics of Receiver: Sensitivity, Selectivity, Fidelity
8. Verification of Sampling Theorem, PAM Techniques, (Flat top & Natural sampling), reconstruction of original signal,
Observe Aliasing Effect in frequency domain.
Following can be performed using suitable software (Any One)
9. Generate AM and FM waveform for given modulation index, signal frequency and carrier Frequency using suitable
software.
10. Prove sampling Theorem. Reconstruct the analog signal from its samples. Observe aliasing effect by varying
sampling frequency.
11. Generation of PAM, PPM, PWM waveform.
*Industrial visit to broadcast station is desirable.
D. C. Machines (9)
Construction, working principle of D.C. generator, emf equation of D. C. generator, working principle of D.C. motor,
types of D.C. motor, back emf, torque equation for D.C. motor, characteristics of D.C. motor (series and shunt only),
three-point starter for D.C shunt motor, methods for speed control of D.C. shunt and series motors, industrial
applications.Special purpose motors: Construction, working principle, characteristic and applicationsof stepper motors,
A.C. and D.C servomotors, universal motors, Industrial applications. brushless DC motors, linear induction motors
Constructional feature, working principle of three phase induction motors, types; torque equation, torque slip
characteristics; power stages; efficiency, starters (auto transformer starter, star delta starter); methods of speed control
and industrial applications. Single phase induction motors: Types, construction, working principle of split phaseand
shaded pole type induction motors, applications. Specifications of induction motors(KW rating, rated voltage, current
rating, frequency, speed, class of insulation)
SCR:- Construction detail, V-I Characteristics, Methods to turn ON, Gate drive requirements and circuit, switching
action during ON & OFF, specification, Concept of commutation of SCR. ApplicationsDIAC:- Construction, V-I
CharacteristicsTRIAC: - Construction, V-I Characteristics, turning ON process.MOSFET:- Construction, transfer
Characteristics, output characteristics, Methods to turnON & OFF, applicationsIGBT:- Construction detail, transfer
Characteristics, output characteristics, Methods to turnON & OFF, applications GTO:- Construction ,working and
characteristic
Drives (9)
Advantages of Electrical Drives, Individual & Group drives, selection ofdrives depending on load characteristics.Speed
Control:- Single phase semi converter and full converter fed D.C. Drives, Three phase converter fed D.C. Drives,
Chopper Drives, two quadrant & four quadrant chopper drives, stator voltage control of three phase induction motor,
frequency control of three phase induction motor, Rotor resistance control of three phase induction motor, V/F control
of three phase induction motor, Regenerative braking.
Textbooks:
1. Edward Hughes “Electrical Technology”, ELBS, Pearson Education.
2. Ashfaq Husain, “Electrical Machines”, Dhanpat Rai & Sons.
3. S. K. Bhattacharya, “Electrical Machine”, Tata Mc Graw Hill publishing Co. Ltd,
4. Nagrath& Kothari, “Electrical Machines”, Tata Mc Graw
5. Power Electronics, Dr. P.S. Bhimbra, Khanna Publication
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
6. M. H. Rashid, “Power Electronics circuits devices and applications”, PHI, New Delhi.
7. M. S. Tamil Asgar, "POWER ELECTRONICS", PHI, 2004, New Delhi
References:
1. Electrical Machines, Lowe, Nelson Publications.
2. A.E. Fitzgerald, Charles Kingsley, Stephen D. Umans, “Electrical Machines”, Tata
3. McGraw Hill Publication Ltd. Fifth Edition.
4. Permanent Magnet Synchronous and Brushless DC Motor Drives, R. Krishnan, CRC press.
5. Smarajit Ghosh, “Electrical Machines”, Pearson Education, New Delhi.
6. "GE SCR MANUAL" 6th edition, General Electric, New York, USA
7. Dr. P. S. Bimbhra, “Power Electronics”, Khanna Publishers, Delhi.
8. P.C. Sen, “Modern Power Electronics”, S Chand & Co New Delhi.
9. U. R. Moorthi, "POWER ELECTRONICS, DEVICES, CIRCUITS & INDUSTRIAL APPLICATIONS" , Oxford
University Press, New Delhi, 2005
10. Ned Mohan, T. Undeland& W. Robbins, “Power Electronics Converters applications and design” John Willey
& sons, Singapore
List of Practicals/Tutorials :
1. Simon Haykin, “Digital Communication Systems”, John Wiley & Sons, Fourth Edition.
2. H. Taub, Donald Schilling, ”Principles of Communication System”, McGraw Hill, Fourth Edition
REFERENCE BOOKS
1. B P Lathi, Zhi Ding “Modern Analog and Digital Communication System”, Oxford University Press, Fourth
Edition.
2. A.B Carlson, P B Crully, J C Rutledge, “Communication Systems”, Fourth Edition, McGraw Hill Publication.
3. Proakis, J.G.Salehi ,M.”Digital Communication”, Fifth Edition, McGraw Hill Publication.
4. Bernard Sklar,Prabitra Kumar Ray, “Digital Communications Fundamentals and Applications” Second
Edition,Pearson Education
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Text Books
1. D. M. Dhamdhare, “Systems Programming and Operating System”, TMH.
2. Andrew S. Tanenbaum, “Modern Operating Systems”, Second Edition, PHI.
Reference Books
1. J. J. Donovan, “Systems Programming”, McGraw Hill.
2. Siberschatz A; Galvin P.B; Gagne G, “Operating System Concepts”, John Wiley.
3. Leland L. Beck, “System Software,” Pearson Editions.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Introduction to 8051 micro-controller, Architecture, Memory organization, Special function registers, Port
operation, Memory interfacing, I/O interfacing, Interrupts, Power down operation, Instruction set and
Programming, 8051 micro controller based system designs
PIC 10, PIC12, PIC16, PIC18 series architectures, comparison, features. PIC18F architecture, registers,
memory Organization and types, stack, oscillator options, BOD, power down modes and configuration bit
settings. Port structure, interrupt structure & timers of PIC18F. Overview of instruction set, MPLAB IDE &
C18 Compiler
Interfacing of switches, LED, LCD, Keypad, PWM generation, MSSP structure, interfacing serial port, ADC,
RTC with I2C and EEPROM with SPI, All programs in embedded C.
Design of DAS system, Design of frequency counter with display on LCD, Design of Digital Multimeter,
Design of DC Motor control using PWM Should cover necessary signal conditioning of input stage,
hardware interfacing with PIC Microcontroller and algorithm or flowchart.
TEXT BOOKS
REFERENCES
Vector Algebra, Coordinate Systems, Vector differential operator, Gradient, Divergence, Curl, Divergence
theorem, Stokes theorem, Coulombs law, Electric field intensity, Point, Line, Surface and Volume charge
distributions, Electric flux density, Gauss law and its applications, Gauss divergence theorem, Absolute
Electric potential, Potential difference, Calculation of potential differences for different configurations.
Electric dipole, Electrostatic Energy and Energy density.
Conductors and dielectrics in Static Electric Field, Current and current density, Continuity equation,
Polarization, Boundary conditions, Method of images, Resistance of a conductor, Capacitance, Parallel
plate, Coaxial and Spherical capacitors, Boundary conditions for perfect dielectric materials, Poisson’s
equation, Laplace’s equation, Solution of Laplace equation, Application of Poisson’s and Laplace’s
equations.
STATIC MAGNETIC FIELDS (9) Biot -Savart Law, Magnetic field Intensity, Estimation of Magnetic
field Intensity for straight and circular conductors, Ampere’s Circuital Law, Point form of Ampere’s Circuital
Law, Stokes theorem, Magnetic flux and magnetic flux density, The Scalar and Vector Magnetic potentials,
Derivation of Steady magnetic field Laws.
TEXT BOOKS:
1. William H Hayt and Jr John A Buck, “Engineering Electromagnetics” , Tata Mc Graw-Hill Publishing
Company Ltd, New Delhi, 2008
2. Sadiku MH, “Principles of Electromagnetics”, Oxford University Press Inc, New Delhi, 2009
REFERENCES:
1. David K Cheng, “Field and Wave Electromagnetics”, Pearson Education Inc, Delhi, 2004
2. John D Kraus and Daniel A Fleisch, “Electromagnetics with Applications”, Mc Graw Hill Book Co,
2005
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
3. Karl E Longman and Sava V Savov, “Fundamentals of Electromagnetics”, Prentice Hall of India, New
Delhi, 2006 4. AshutoshPramanic, “Electromagnetism”, Prentice Hall of India , New Delhi, 2006
Tutorials
Tutorials must be conducted batch wise. Batch size should not be more than 20 students.
The main objective of this tutorial is to focus on the outcomes defined in the theory syllabus by solving
the following assignments/problems based on paper work.
Find the Electric field intensity and electric flux density at a given point due to following charge
distributions. (In all coordinate systems)
1) Point charges
2) Line charges (finite and infinite)
3) Surface charges (finite and infinite)
4) Mixed charges ( Point charge, Line charge, Surface charge)
Find the Electric potential due to different charge distributions (Point charge, Line charge, Surface
charge), in different coordinate systems.
Given v (volume charge density), and the region with reference potential, find the potential in a given
region, using Poisson‟s equation.
Using Laplace‟s equation, find capacitance between any two surfaces, if the boundary conditions are
given.
Find the electrostatic fields (Tangential and Normal) at the boundary between, 1) Free space and
dielectric medium 2) Free space and conductor 3) dielectric medium and conductor 4) Two dielectric
media. 5) Two dielectric media when boundary is defined by a equation of plane.
Find H (Magnetic field intensity) and B (Magnetic flux density) at a given point due to,
1) Infinitely long current carrying conductor
2) Finite current carrying conductor
3) Infinite conducting surface
4) Finite conducting surface
5) Different current carrying configurations (i.e. thin conductor, surface all together)
For the following current carrying configurations, find the H (Magnetic field intensity) in a given region
(or point) using Ampere‟s circuital law.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Given the H (Magnetic field intensity) of a particular region, find current (I), current density ( J ),
enclosed by the given surface. (In all coordinate systems)
Prove both sides of Stokes‟ theorem when H (Magnetic field intensity) is given in Cartesian, cylindrical
and spherical coordinate system separately.
Find the static magnetic fields(Tangential and Normal) at the boundary between,
1) Two different magnetic media with nonzero surface current density( K )
2) Two different magnetic media with zero surface current density( K )
3) Two different magnetic media when boundary is defined by a equation of plane.
Given H (or E ) and the region properties(like , , etc.), find B,D and E (or H ) using Maxwell‟s
equations. (In all coordinate systems)
Given H (or E ) and the region properties(like , , , ), the average power density in W/m2 , Total
power crossing the given surface in watts using Poynting Theorem (In all coordinate systems)
Note:
Group A
Group B
**Final Lab exam will be conducted with viva-voce of the respective practical (50 exam +10 viva = 60)
Group A
1. Basic Linux commands & Shell scripting on LINUX.
2. Write C Program to implement Lexical Analyzer for simple arithmetic operation which creates output
tables (Uniform Symbol Table or a. Identifier Table b. Literal Table c. Symbol Table).
3. Design of PASS I of two pass assembler for pseudo machine code.
4. Design of MACRO Pass I.
5. Implement Job scheduling algorithms: FCFS, SJF.
6. Implement Bankers Algorithm for deadlock detection and avoidance.
7. Implementation of page replacement algorithm: FIFO / LRU.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Group B
1. Write a program for interfacing button, LED, relay & buzzer as follows
2. Write a program for interfacing LCD without using any standard library function
3. Write a program for generating square wave using timer with interrupt.
4. Interfacing serial port with PC both side communication.
5. Interfacing DS1307 RTC chip using I2C and display date and time on LCD
6. Interfacing EEPROM 24C128 using SPI to store and retrieve data
7. Interface analog voltage 0-5V to internal ADC and display value on LCD
8. Generation of PWM signal for DC Motor control.
9. Seminar on real time applications using PIC microcontroller
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Introduction to information theory, Entropy and its properties, Introduction to Source coding, Minimum variance
Huffman coding, extended Huffman coding , Shannon-Fano coding, The Lempel Ziv algorithm, Run Length Encoding,
Discrete memory less channel, Mutual information. Differential entropy and mutual Information for continuous
ensembles, Information Capacity theorem,
Case Study: Huffman coding in image compression/JPEG
Introduction to error control coding, Types of codes, Maximum Likelihood decoding, Types of errors and error control
strategies, Channel capacity, Channel coding theorem,
Linear Block Codes: Encoding of LBC, Syndrome and error detection, Error detection and correction capability,
Standard array and syndrome decoding, Encoding and decoding circuit, Single parity check codes.
Introduction:- Repetition codes and dual codes, Hamming code, Golay Code, Goppa Code, Interleaved code.
Case Study: Shannon’s Publications on information theory.
Galois field, Primitive element & Primitive polynomial, Minimal polynomial and generator polynomial, Description of
Cyclic Codes, Generator matrix for systematic cyclic code, Encoding for cyclic code, Syndrome decoding of cyclic
codes, Circuit implementation of cyclic code.
Case Study: CRC used in Ethernet LAN
Binary BCH code, Generator polynomial for BCH code, Decoding of BCH code, RS codes, generator polynomial for
RS code, Decoding of RS codes, Introduction to Reed Muller Code
Case Study: RS Coding in CD recording.
Introduction of convolution code, Transfer function of a convolutional code ,State diagram, Polynomial description of
convolution code, Generator matrix of convolution code, Tree diagram, Trellis diagram, Sequential decoding and
Viterbi decoding, Known good convolution code, Introduction to LDPC and Turbo codes.
Trellis Coded Modulation: Concept of TCM and Euclidean distance, Asymptotic coding gain, Mapping by set
partitioning, Ungerboeck’s TCM design rule.
Case study: -- Application of CC in High Speed Networks
TEXT BOOKS
1. Ranjan Bose, “Information Theory coding and Cryptography”, McGraw-Hill Publication, 2nd Edition
2. J C Moreira, P G Farrell, “Essentials of Error-Control Coding”, Wiley Student Edition
3. Khalid Sayood, “Introduction to Data compression”, Morgan Kaufmann Publishers
4.Shulin and Daniel j, Costello Jr., “Error control Coding” Pearson Publishers, 2nd Edition
REFERENCE BOOKS
1. BernadSklar, “Digital Communication Fundamentals & applications”, Pearson Education. Second Edition.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
2. Simon Haykin, “Communication Systems”, John Wiley & Sons, Fourth Edition.
3. Todd Moon, “Error Correction Coding: Mathematical Methods and Algorithms”, Wiley Publication
LIST OF TUTORIALS
Introduction: Limitations of analog signal processing, Advantages of digital signal processing and its applications,
Basic Elements of Digital Signal Processing Systems, Sampling of Continuous Time Signals: Sampling and aliasing
problem, Reconstruction of a continuous time signal from its samples; Discrete Time Processing of Continuous time
signals.
Z-transform, Region of convergence of the system, properties of ROC and Z transform Unilateral Z-transform and its
application to difference equations with nonzero initial condition, and Inverse z-transform, Stability-Time-Domain and
Frequency Domain Analysis.
Review of Discrete Time Fourier series and Discrete Time Fourier Transform, Introduction to DFT, Relation between
Fourier transform and DFT, Computation of DFT, Properties of DFT, Circular Convolution, Filtering methods based on
DFT, FFT algorithms: Direct computation of DFT, DIT, DIF Algorithms, and Use of FFT in Linear Filtering.
Analog filter specifications, classification of analog filters: Butterworth and Chebyshev filters, design of analog filters,
Design of Discrete-Time IIR filters from Continuous-Time filters, Approximation by derivatives, Impulse invariance and
Bilinear Transformation methods (LP, HP, BP, BS digital filters).
IIR filter structures: Direct form (I and II), Cascade, Parallel, and Lattice Structures.
Ideal filter requirements, Gibbs phenomenon, Properties of FIR filters, Symmetric and antisymmetric Low pass FIR
filter, Design of linear-phase FIR filters using windows and frequency sampling methods, characteristics and
comparison of different window functions.Structures for FIR Systems: Direct-Form Structures, Cascade-Form
Structures and Lattice Structures.
TEXT BOOKS:
1.John G. Proakis& Dimitris G.Manolakis, “Digital Signal Processing – Principles, Algorithms & Applications”, Fourth
Edition, Pearson Education / Prentice Hall, 2007.
2. Digital Signal Processing, S. Salivahanan, A. Vallavaraj, C. Gnapriya TMH.
3. Emmanuel Ifeachor, Barrie W. Jervis, “Digital Signal Processing: A Practical Approach”, Pearson Education,
Second Edition, 2002.
4. P. Ramesh Babu, “Digital Signal Processing”. 4E, Scitech Publication Pvt. Ltd.
REFERENCE BOOKS:
ARM-CM3 Based Microcontroller LPC17XX: Features, Architecture (Block Diagram &ItsDescription), System Control,
Clock & Power Control, GPIO, Pin Connect Block, interfacingSeven Segment, MOTOR control using PWM, Concept of
USB, CAN and Ethernet based communication using microcontrollers.
Text Books:
1. Andrew Sloss, Dominic Symes, Chris Wright, “ARM System Developer‟s Guide –Designing and Optimizing System
Software”, ELSEVIER
2. Joseph Yiu, “The Definitive Guide to the ARM Cortex-M”, Newness, ELSEVIER
Reference Books:
1. LPC 214x User manual (UM10139):- www.nxp.com
2. LPC 17xx User manual (UM10360):- www.nxp.com
3. ARM architecture reference manual: - www.arm.com
4. Trevor Martin,”An Engineers Introduction to the LPC2100 series”, Hitex (UK) Ltd.
FUNDAMENTALS OF RADIATION
Definition of antenna parameters . Gain, Directivity, Effective aperture, Radiation Resistance, Band width, Beam width,
Input Impedance. Matching .Baluns, Polarization mismatch, Antenna noise temperature, Radiation from oscillating
dipole, Half wave dipole. Folded dipole, Yagi array.
ANTENNA ARRAYS
N element linear array, Pattern multiplication, Broadside and End fire array . Concept of Phased arrays, Adaptive
array, Basic principle of antenna Synthesis-Binomial array
SPECIAL ANTENNAS
Principle of frequency independent antennas .Spiral antenna, Helical antenna, Log periodic. Modern antennas-
Reconfigurable antenna, Active antenna, Dielectric antennas, Electronic band gap structure and applications, Antenna
Measurements-Test Ranges, Measurement of Gain, Radiation pattern, Polarization, VSWR
TEXT BOOKS:
John D Kraus,” Antennas for all Applications”, 3rd Edition, Mc Graw Hill, 2005.
REFERENCES BOOKS:
1. Edward C.Jordan and Keith G.Balmain” Electromagnetic Waves and Radiating Systems” Prentice Hall of India,
2006
2. R.E.Collin,”Antennas and Radiowave Propagation”, Mc Graw Hill 1985.
3. Constantine.A.Balanis “Antenna Theory Analysis and Design”, Wiley Student Edition, 2006.
4. Rajeswari Chatterjee, “Antenna Theory and Practice” Revised Second Edition New AgeInternational Publishers,
2006.
5. S. Drabowitch, “Modern Antennas” Second Edition, Springer Publications, 2007.
6. Robert S.Elliott “Antenna Theory and Design” Wiley Student Edition, 2006.
7. H.Sizun “Radio Wave Propagation for Telecommunication Applications”, First Indian Reprint,Springer Publications,
2007.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
ACTUATORS (09)
Concept, classification of actuator, Electrical Actuators- Solenoids, Relays, Stepper motors, AC/DC motors,
Servomotors Pneumatic- Air motor,3/2,4/2,5/3 valves, single acting, double acting cylinders Control valves-
classification, characteristics, selection criteria Hydraulic-Infrastructure, 3/2, 4/2, 5/3 valves, logic circuit, Power cables
and signal cables.
TUTORIALS
Text Books
1. DevdasShetty and Richard A. Kolk, Mechatronics System Design, Thomson Asia Pvt. Ltd., Second Reprint, 2001.
2. W. Bolton, Mechatronics, Pearson Education Asia, Third Indian Reprint 2001.
Reference Books
1. David G. Alciatore and Michael B. Histand, Introduction to Mechatronics and Measurement Systems, Tata McGraw
Hill, Second Edition, 2003.
2. Mahalik, Mechatronics – Principles, concepts and applications, Tata Mc-Graw Hill publication, New Delhi.
3. C. D. Johnson, Process Control Instrumentation Technology, Prentice Hall, New Delhi.
For the enhancement of Technical Communication Skills, it is advised to refer to the following
1. Meenakshi Raman, Sangeeta Sharma,‟ Technical Communication, Principles and Practice‟, Oxford University
Press
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
2. M Ashraf Rizvi,‟ Effective Technical Communication‟, Tata McGraw Hill Education Pvt. Ltd.
3. C Muralikrishna, Sunita Mishra,‟ Communication Skills for Engineers‟, Pearson
List of Experiments:
Text Books
1. Behrouz A. Foruzan, “Data communication and Networking”, Tata McGraw-Hill,5thEdition
2. Andrew S. Tannenbaum, “Computer Networks”, Pearson Education, Fourth Edition,2003
Reference Books
1. James F. Kurouse& W. Rouse, “Computer Networking: A Top down Approach”, 6 th Edition, Pearson Education.
2. LL Peterson, BS Davie, Computer Networks: A Systems Approach, 5th Ed., Morgan-Kauffman, 2011.
3. W Stallings, Cryptography and Network Security, Principles and Practice, 5th Ed., Prentice-Hall, 2010
4. Wayne Tomasi, “Introduction to Data Communication and Networking”, 1/e, PearsonEducation
5. Anti -Hacker Tool Kit (Indian Edition) by Mike Shema, Publication Mc Graw Hill.
6. Cyber Security Understanding Cyber Crimes, Computer Forensics and Legal Perspectives by Nina Godbole
and SunitBelpure, Publication Wiley
LIST OF TUTORIALS
VHDL (9)
Data objects, Data types, Entity, Architecture & types of modeling, Sequential statements,
Concurrent statements, Attributes, VHDL Test bench. VHDL modeling of Combinational, Sequential logics & FSM,
Meta-stability.
Software Design Flow. CPLD Architecture, Features, Specifications, Applications. FPGA Architecture, Features,
Specifications, Applications.
Fabrication technology: Basic steps of fabrication, Bipolar, CMOS, Bi-CMOS fabrication processes, Layout design
rules, MOS and Bi-CMOS characteristics and circuits: MOS transistor characteristics, MOS switch and inverter, Bi-
CMOS inverter, Technology scaling.
Need of design for testability (DFT), Types of fault. Controllability, Predictability, Testability, Built in self test (BIST),
Partial and full scan check, Need of boundary scan check, JTAG,TAP Controller.
Clock skew, Clock distribution techniques, Clock jitter. Supply and ground bounce, Power distribution techniques,
Power optimization. Interconnect routing techniques, wire parasitic. Design validation. Off chip connections, I/O
architectures.
.
Text books:
1. Neil H. E. Weste, Kamran Eshraghian, “Principles of CMOS VLSI Design”, Pearson Publication.
2. Douglas A. Pucknell, Kamran Eshraghian, “Basic VLSI Design”, Prentice Hall Publication
3. S. K. Gandhi, “VLSI Fabrication Principles”, John Wiley Inc., New York.
4. Wyan Wolf, “Modern VLSI Design (System on Chip)”, Pearson Publication.
Reference books:
1. Data Sheets of PLDs.
2. Douglas L. Perry, “VHDL”, McGraw Hill Publication.
3. Charles Roth, “Digital System Design using VHDL”, McGraw Hill Publication.
4. Sung-Mo Kang, Yusuf Leblebici, “CMOS Digital Integrated Circuits”. McGraw Hill Publication
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Evolution of Microwave, Microwave frequencies, Standard frequency bands and behavior of circuits at conventional &
microwave frequencies, Microwave Applications in Microwave oven, Microwave Dryer, and in medical field such as
Radio therapy, Review of Maxwell’s equations.
Wave guides: Over view of wave guided waves; TE, TM & TEM modes, Analysis of these modes through rectangular
waveguide, circular wave guide, waveguide dimensions and problems based on above topics.
Introduction to S parameters, Scattering Matrix and its properties Termination, E-plane Tee, H-plane Tee, Magic Tee,
Microwave Hybrid Circuits, Hybrid Rings (Rat-Race Circuits), Directional Couplers, Two-Hole Directional Couplers,
Hybrid Couplers, Microwave Circulators, Microwave Isolators, Waveguide Corners, Bends and Twists, Coupling
probes, Coupling loops, Windows, Waveguide Tuners.
Transit Time Effect, Limitations of conventional Tubes, Two cavity and Multi-cavity Klystron, Reflex Klystron, TWT and
Magnetrons, Reentrant Cavities, spark gap switches, problems based on above topics
Transferred Electron Devices (TEDs): Transit time limitations in transistors, Microwave bipolar transistors, power
frequency limitations, microwave field effect transistors, HEMT, Gunn effect and Gunn Diode, High - field domain and
modes of operation microwave amplification - Avalanche transit time devices – IMPATT, TRAPATT, BARITT and
Schottky diodes, comparison parametric amplifiers.
Slotted line VSWR measurement, VSWR through return loss measurements, power measurement, impedance
measurement insertion loss and attenuation measurements- measurement of scattering parameters - Measurement of
1 dB, dielectric constant measurement of a solid using waveguide Power Measurement; Calorimeter method,
bolometer bridge method, thermocouples, impedance measurement, Measurement of frequency and wavelength,
Measurement of unknown loads, Measurement of reflection coefficient. VSWR and Noise, Microwave Test bench.
Basic principle, radar range equation: powers and frequencies used in radar, basic pulsed radar system, Factors
Influencing maximum range, Effect of noise, Display Methods, Search and Tracking radar systems, Moving target
indicator (MTI), CW Doppler Radar, Frequency Modulated CW radar, RADAR as application of microwave.
CASE STUDY: Modeling of one application using CST Microwave Studio, COMSOL Multi-physics, Ansys-HFSS
(Any one Software)
TEXT BOOKS
REFERENCE BOOKS
Steps in image processing, Human visual system, Sampling & quantization, Representing digital images, Spatial &
gray-level resolution, Image file formats, Basic relationships between pixels, Distance Measures. Basic operations on
images-image addition, subtraction, logical operations, scaling, translation, rotation. Image Histogram. Color
fundamentals & models – RGB, HSI YIQ.
Spatial domain enhancement: Point operations-Log transformation, Power-law transformation, Piecewise linear
transformations, Histogram equalization. Filtering operations- Image smoothing, Image sharpening.
Frequency domain enhancement: 2D DFT, Smoothing and Sharpening in frequency domain. Homomorphic filtering.
Restoration: Noise models, Restoration using Inverse filtering and Wiener filtering.
IMAGE COMPRESSION 6
Types of redundancy, Fidelity criteria, Lossless compression – Runlength coding, Huffman coding, Bit-plane coding,
Arithmetic coding. Introduction to DCT, Wavelet transform, Lossy compression – DCT based compression, Wavelet
based compression. Image and Video.
Compression Standards – JPEG, MPEG.
Image Segmentation: Point Detections, Line detection, Edge Detection-First order derivative – Prewitt and Sobel.
Second order derivative – LoG, DoG, Canny. Edge linking, Hough Transform, Thresholding – Global, Adaptive. Otsu’s
Method. Region Growing, Region Splitting and Merging. Morphological Operations: Dilation, Erosion, Opening,
Closing, Boundary Detection.
Representation – Chain codes, Polygonal approximation, Signatures. Boundary Descriptors – Shape numbers, Fourier
Descriptors, Statistical moments. Regional Descriptors – Topological, Texture, Principal Components for Description.
TEXT BOOKS:
1. Rafael C. Gonzalez and Richard E. Woods, “Digital Image Processing”, Third Edition, -
Pearson Education.
2. S Sridhar, “Digital Image Processing”, Oxford University Press.
REFERENCE BOOKS:
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
1. Rafael C. Gonzalez, Richard E. Woods, and Steven L. Eddins, “Digital Image Processing Using MATLAB”, Second
Edition, - Tata McGraw Hill Publication.
3. S Jayaraman, S Esakkirajan, T Veerakumar, “Digital Image Processing”, Tata McGraw, Hill Publication.
μCOS II (7)
Features of μCOS II. Kernel structure. μCOS II RTOS services: Task management, Time management, Intertask
Communication and Synchronization.
Text Books
1. Jean J.Labrosse, “MicroC OS II, The Real-Time Kernel”, 2nd edition, CMP Books.
2. Christopher Hallinan, “Embedded Linux Primer -A Practical, Real-World Approach ”2nd edition, Prentice Hall.
Reference Books
1. Raj Kamal, “Embedded Systems – Architecture, Programming and Design" 2nd edition, McGraw Hill.
2. Frank Vahid and Tony Givargis, “ Embedded System Design – A Unified hardware/ Software introduction ” 3rd
edition, Wiley.
TEXT BOOKS
REFERENCE BOOKS
TUTORIALS
Text Books:
1. Bela G Liptak, “Process software and digital networks”, CRC Press, 3rd edition, 2002.
2. Curtis Johnson, “Process Control Instrumentation Technology”; 8th Edition, Pearson
3. MadhuchhandaMitra, Samarjit Sen Gupta, “Programmable Logic controllers and Industrial Automation”;
Penram International Publishing India Pvt. Ltd
4. Stuart A. Boyer, “SCADA supervisory control and data acquisition”, ISA Publication
Reference Books:
1. John W. Webb, Ronold A Reis, “Programmable Logic Controllers, Principles and Applications”; 5th Edition,
Prentice Hall of India Pvt. Ltd
2. Kilian, “Modern control technology: components & systems, Delmar 2 nd edition.
3. Pollack. Herman, W & Robinson., T. “Computer Numerical Control”, Prentice Hall. NJ.
4. Pabla, B.S. &Adithan, M. “CNC Machines”, New Age Publishers, New Delhi
List of Tutorials:
FOUNDATION (8)
Why AI, Industry Successes, Smart Rooms, Intelligent Agents, Agents and environments, Good behavior, The nature
of environments, structure of agents, Problem Solving, problem solving agents, example problems, Searching for
solutions, uniformed search strategies, avoiding repeated states.
SEARCHING (8)
Search and exploration, Informed search strategies, heuristic function, local search algorithms and optimistic
problems, local search in continuous spaces, online search agents and unknown environments, Constraint satisfaction
problems (CSP), Backtracking search and Local search for CSP, Structure of problems, Games: Optimal decisions in
games, Alpha- Beta Pruning, imperfect real-time decision, games that include an element of chance.
First order logic, representation revisited, Syntax and semantics for first order logic, Using firstorder logic, Knowledge
engineering in first order logic, Inference in First order logic,prepositional versus first order logic, unification and lifting,
forward chaining, backwardchaining, Resolution.Robotics, Humanoid personal-use robot "Pepper," Robot Path
Planning
LEARNING (8)
Learning from observations: forms of learning, Inductive learning, Learning decision trees, Statistical learning methods,
Bay’s Rule, Instance based learning, Neural networks ,Markov Models, Hidden Markov Models with Discrete
Observations, HMMs with Continuous Output Densities, Applications of HMMs: American Sign Language Recognition,
Hand Tracking
Why NL, Formal grammar for a fragment of English, Syntactic analysis, Augmented grammars, Syntactic processing,
semantic analysis, discourse & pragmatic processing. Introduction to Expert System, Architecture and functionality,
Example Expert systemComputer Vision for interactive graphics (image moments for object area, position &
orientation, orientation histograms, optical flow, template matching, SSD, NCC, recursive labeling algorithm),
confusion matrices, ROC analysis
TEXT BOOKS
REFERENCE BOOKS
1. Nils J. Nilsson, “Artificial Intelligence: A new Synthesis”, Harcourt Asia Pvt. Ltd.
2. George F. Luger, “Artificial Intelligence-Structures and Strategies for Complex Problem
Solving”, Pearson Education/ PHI.
1. Write a Program (WAP) for any one uninformed search methods with some application.
2. WAP to implement A* approach for any suitable application.
3. WAP for Unification algorithm.
4. WAP for 8 queen’s problem.
5. WAP to develop embedded security application of a door lock.
6. Write a program to correct the spelling of English sentence.
7. WAP to Implement MiniMax approach for TIC-TAC-TOE.
8. WAP for a simple NN with any suitable application (without tool).
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Stages in product design- Design process -Market survey, Product Specifications (Electrical,
Mechanical,Environmental), R&D and Engineering Prototypes, Pilot Production Batch, Environmental testing,
Documentation, Manufacturing. Electronic Products, Classification- Consumer, Industrial and Military. Their
peculiarities in terms of Cost/performance ratio and Reliability. Reliability- Bath tub curve. Five element of
successful design, cognition, and ergonomics. Packaging and factors, design for manufacture, assembly and
disassembly, wiring, temperature, Importance of vibration and shocks, grounding and shielding. Safety
considerations.
Identifying requirements, formulate specifications of the product. System partitioning functional design.
Requirements, specifications. Analog Circuit Design considerations-Instrumentation Amplifiers, DC and DAC
interfacing.Egoless design, design reviews. Module debug and test: black box test, white box test, grey box
test. Hardware documentation.Design considerations for selection of microcontrollers-comparison of
architectures, features.
Implementing Radio link, Path profile. RF path loss calculations, Transmitter/Receiver sensitivity, Signal to Noise
Ratio and SINAD, Fade Margin. Study and evaluation of Performance parameters like- Bit and Symbol error
rates. Spectral bandwidth calculations. Design of various blocks of communication systems such as- Phase-locked
Loop, Equalizer and Interleaver.
Text Books:
2. Robert J. Herrick, “Printed Circuit board design Techniques for EMC Compliance”,Second edition, IEEE press.
Reference Books:
1. James K. Peckol, “Embedded Systems – A Contemporary Design Tool”, Wiley Publication
2. J C Whitakar,” The Electronics Handbook”, CRC press
3. Tim Williams, “EMC for Product Designers”, Elsevier, Fourth edition 2007
4.David Bailey, “Practical Radio Engineering and Telemetry for Industry”, Elsevier,ISBN 07506 58037
5. Bernard Sklar , “Digital Communication” , Pearson Ed
6.Pressman , “Software Engineering - A Practitioner's Approach”
TEXT BOOKS:
1. P.P. Vaidyanathan, “Multirate systems and filter banks.” Prentice Hall. PTR. 1993.
2. N.J. Fliege. “Multirate digital signal processing .” John Wiley 1994.
Reference Books:
1. S. Haykin, "Adaptive Filter Theory", Prentice Hall, Englewood Cliffs, NJ, 1991.
2. S. K. Mitra, Digital Signal Processing: A Computer Based Approach, 2nd ed., Tata Mc-GrawHill, New Delhi, 2001.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
4G NETWORKS (8)
Introduction – 4G vision – 4G features and challenges - Applications of 4G – 4G Technologies:
Multicarrier Modulation, Smart antenna techniques, OFDM-MIMO systems, Adaptive Modulation and coding with time
slot scheduler, Cognitive Radio.
The student will carry the project work individually or by a group of students. Optimum group size is in 3 students.
However, if project complexity demands a maximum group size of 4 students, the committee should be convinced
about such complexity and scope of the work.
Project topic should be related to real life application or investigation of the latest development in the field of
Electronics and Telecommunication or investigation of practical problem in manufacture and / or testing of electronics
or communication equipment or Microprocessor / Microcontroller based applications project is preferable or Software
development project related to VHDL, Communication, Instrumentation, Signal Processing and Agriculture
Engineering with the justification for techniques used / implemented is accepted or Interdisciplinary projects.
Examination will be conducted independently in respective departments in case of interdisciplinary projects.
Synopsis of the project should be submitted immediately after finalization of the project topic.
The group should maintain a Logbook of activities and Workbook mentioning the entries related to the work done,
problems faced, solutions evolved etc., duly signed by internal and external guides. Logbook and workbook must be
presented to all evaluation committees.
The department will constitute one or more evaluation boards for continuous monitoring of the projects. The boards will
examine day to day records and conduct viva-voce and/or oral presentation of the students. The department, at its
discretion, may include external members in the viva-voce boards.
The examination will be conducted by two examiners (Project supervisor and External Examiner)
Continuous assessment is based on literature survey, basic project work, innovative idea, depth of understanding,
application, individual contribution, presentation and the grade allotted by the internal guide, based on the project work
carried out in a semester.
In project phase-I, literature survey, system design, circuit design, PCB artwork design using appropriate EDA tool,
Hardware/Software simulation and procurement of the component need to be completed. For software based projects
algorithm or software flowchart and coding of at least 50% modules needs to be completed.
At the end of the semester a certified copy of project report, in the prescribed format should be presented to the to the
project examiners.
List of Experiments:
Group A: ARM7 &μCOS- II Based Experiments
1. Multitasking in μCOS II RTOS using minimum 3 tasks on ARM7
2. Semaphore as signaling & Synchronizing on ARM7.
3. Mailbox implementation for message passing on ARM7.
4. Queue implementation for message passing on ARM7.
5 Implementation of MUTEX using minimum 3 tasks on ARM7.
A. To write VHDL code, simulate with test bench, synthesis, implement on PLD[Any 4].
1. 4 bit ALU for add, subtract, AND, NAND, XOR, XNOR, OR, & ALU pass.
2. Universal shift register with mode selection input for SISO, SIPO, PISO, &PIPOmodes.
3. To generate ramp/square waveform using DAC
4. To design lift/traffic light controller..
5. To write/read in to RAM..
B. To prepare CMOS layout in selected technology, simulate with and withoutcapacitive load, comment on rise,
and fall times.
1. CMOS Inverter.
2. CMOS NAND, NOR, Half Adder
3. 2:1 multiplexer using logic gates and transmission gates.
4. D flip-flop.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
TV Transmitter (9)
Video modulation, vestigial sideband transmission, standard TV channels,Characteristics, TV transmitter, TV
standards.ReceiverIntroduction , Block diagram, Receiver controls, RF tuners, Video channel and picture tube, AGC
and synchronization circuits, Deflection circuit (Horizontal and vertical ),
video detector, Sound section.
Text Books
Reference Books
List of Experiments:
Micro sensors - Thermal sensors, Electrical sensors, Mechanical sensors, Chemical and Biosensors. Micro
actuators - Electromagnetic and thermal micro actuation, Mechanical design of micro actuators, Micro actuator
examples, micro valves, micro pumps, micro motors, microgrippers – microaccelerometers.
Overview of Micro manufacturing – Bulk micro manufacturing – Surface micro machining – LIGA process
Materials: Substrates and wafers, silicon substrate, properties of silicon, silicon compounds, silicon piezo resistors,
Galium arsenide, quartz, polymer for MEMS, conductive polymer. Shape memory alloys fabrication
processes:Substrates - single crystal silicon wafer formation – Photolithography – Ion implantation - thin film
deposition – Diffusion – Oxidation – CVD - Physical vapor deposition - Deposition epitaxy - etching process.
Microsteriolithography (MSL) for 3D fabrication, Nano lithography
Design considerations – Selection of signal transduction – Process design – Design of a silicon die for a micro
pressure sensor – Microsystem packaging - three levels of micro system packaging – interfaces in micro system
packaging – Signal mapping and transduction – RF MEMS and optical MEMS components.
Mechanical and electrical resonators, Q-factor, switches, filters Power for MEMS: thin film batteries, micro fuel cells,
energy fields, MEMS Packaging and Assembly: microassembly: serial and parallel, deterministic and stochastic;
microgrippers: HexSil process; packaging techniques
Biomems – neural implants, gene chips, diagnostic chips; MEMS in space; mechanical computers; invisible and
ubiquitous computing
Text book:
References:
1. Mark Madou, “Fundamentals of Micro fabrication”, CRC Press, New York, 1997.
2. Sze S M, “Semiconductor Sensors”, McGraw-Hill, New Delhi, 1994.
3. Trimmer William S., Ed., “Micromechanics and MEMS”, IEEE Press New York, 1997.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
4. Maluf, Nadim, “An introduction to Micro electro mechanical Systems Engineering”, AR Tech house, Boston 2000.
5. Julian W. Gardner, Vijay K. Varadan, Osama O. Awadel Karim, “Micro sensors MEMS and Smart Devices”, John
Wiley & sons Ltd., 2001.
6. Tai-Ran Hsu, MEMS and Microsystems Design and Manufacture, Tata McGraw-Hill Publishing Company Ltd,
2002.
7. Micro sensors, MEMS & Smart Devices, JW Gardner & V.K. Varadan John Wiley,
Orbital Mechanics(8)
History of Satellite Communication, Orbital Mechanics, Look angle determination, Orbital
Perturbations, Launchers and Launch Vehicles, Orbital effects in communication system performance.
REFERENCE BOOKS
1.Senior,Optical Fiber Communication Practice and Principles, Prentice Hall of India,3 rd Edition
2.Govind P. Agrawal, Fiber-Optic Communication Systems, Wiley, 3rd edition.
3. Dennis Roody, “Satellite Communications”, McGraw Hill
4.WayneTomasi,Advanced Electronic Communication, Prentice Hall of India ,5 th Edition
5. Tutorial on Power budget and time budget analysis of optical fiber system.
6. Establishing a direct communication link between Uplink Transmitter and Downlink
Receiver using tone signal.
7. To set up an Active Satellite link and demonstrate Link Fail Operation
8. To establish an AUDIO-VIDEO satellite link between Transmitter and Receiver
9. To communicate VOICE signal through satellite link
10. To transmit and receive three separate signals (Audio, Video, Tone) simultaneously
through satellite Link
11. To transmit and receive PC data through satellite link
12. Tutorial on satellite link design
13. Visit to a satellite earth station
INTRODUCTION (8)
Specifications of Robots- Classifications of robots – Work envelope - Flexible automation versus Robotic technology –
Applications of Robots,Robot Kinematics And Dynamics,Positions, Orientations and frames, Mappings: Changing
descriptions from frame to frame, Operators: Translations, Rotations and Transformations - Transformation Arithmetic
- D-H Representation - Forward and inverse Kinematics Of Six Degree of Freedom Robot Arm – Robot Arm dynamics
MANIPULATORS (8)
Construction of Manipulators, Manipulator Dynamic and Force Control, Electronic and Pneumatic manipulators
TEXT BOOKS:
1. Deb S. R. and Deb S., “Robotics Technology and Flexible Automation”, Tata McGraw Hill Education Pvt. Ltd, 2010.
2. John J.Craig , “Introduction to Robotics”, Pearson, 2009.
3. Mikell P. Grooveret. al., "Industrial Robots - Technology, Programming and Applications", McGraw Hill, New York,
2008.
REFERENCES:
1. Richard D Klafter, Thomas A Chmielewski, Michael Negin, "Robotics Engineering – An Integrated Approach",
Eastern Economy Edition, Prentice Hall of India Pvt. Ltd., 2006.
2. Fu K S, Gonzalez R C, Lee C.S.G, "Robotics : Control, Sensing, Vision and Intelligence", McGraw Hill, 1987
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Biological neuron, Artificial neuron model, concept of bias and threshold , McCulloch‐PitsNeuron Model ,
implementation of logical AND, OR, XOR functions Soft Topologies of neuralnetworks, learning paradigms:
supervised, unsupervised, reinforcement, Linear neuron model :concept of error energy , gradient descent algorithm
and application of linear neuron for linearregression, Activation functions : binary , bipolar (linear, signup, log sigmoid,
tan sigmoid)Learning mechanisms: Hebbian, Delta Rule o Perceptron and its limitations
Multilayer perceptron (MLP) and back propagation algorithm , Application of MLP forclassification and regression ,
Self‐ organizing Feature Maps, k‐ means clustering , Learningvector quantization, Radial Basis Function networks:
Cover’s theorem, mapping functions, Support Vector Machine.
Concept of Fuzzy number, fuzzy set theory (continuous, discrete) o Operations on fuzzy sets,Fuzzy membership
functions (core , boundary ,support) , primary and composite linguistic terms ,Concept of fuzzy relation, composition
operation (T-norm,T‐conorm) o Fuzzy if‐then rules.De‐fuzzification ( Maxmembership principle, Centroid method,
Weighted average method), Concept of fuzzy inference
Fuzzy Inference systems ‐Mamdani fuzzy model , Sugeno fuzzy model , Tsukamoto fuzzy model, control system
design problem with example of Temperature control, Control (Decision) Surface, Assumptions in a Fuzzy Control
System Design, Fuzzy Logic Controllers , Comparison with traditional PID control, advantages of FLC, Architecture of
a FLC with Example of Aircraftlanding control problem.
Simple GA, crossover and mutation, Multi-objective Genetic Algorithm (MOGA). Applications of Genetic Algorithm:
genetic algorithms in search and optimization, GA based clustering Algorithm, Image processing and pattern
RecognitionOther Soft Computing techniques: Simulated Annealing, Tabu search, Ant colony optimization (ACO),
Particle Swarm Optimization (PSO).
TEXT BOOKS
REFERENCE BOOKS
1. Introduction to the theory of neural computation, John Hertz, Anders Krogh, RichardPalmer, Addison –Wesley
Publishing Company, 1991
2. Neural NetworksA comprehensive foundation,, Simon Haykin,PrenticeHallInternational Inc-1999
3. Neural and Adaptive Systems: Fundamentals through Simulations, José C. PrincipeNeil R. Euliano , W. Curt
Lefebvre, John-Wiley & Sons, 2000
4. Pattern Classification, Peter E. Hart, David G. Stork Richard O.Duda,SecondEdition,2000
5. Pattern Recognition, SergiosTheodoridis ,KonstantinosKoutroumbas, Fourth Edition,Academic Press, 2008
6. A First Course in Fuzzy Logic, Third Edition, Hung T. Nguyen, Elbert A. Walker,Taylor& Francis Group, LLC, 2008
7. Introduction to Fuzzy Logic using MATLAB, S. N. Sivanandam ,S.Sumathi, S. N.Deepa, Springer Verlag, 2007
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Speech Fundamentals: Articulatory Phonetics – Production and Classification of Speech Sounds; Acoustic
Phonetics and Phonemic alphabets, Phonemes – Acoustics of speech production; Review of Digital Signal
Processing concepts; Short-Time Fourier Transform, Filter-Bank and LPC Methods.
Features, Feature Extraction and Pattern Comparison Techniques: Speech distortion measures–
mathematical and perceptual – Log–Spectral Distance, Cepstral Distances, Weighted Cepstral Distances and
Filtering, Likelihood Distortions, Spectral Distortion using a Warped Frequency Scale, solution of LPC
equations-Cholesky method-Durbin’s Recursive algorithm, PLP and MFCC Coefficients, Time Alignment and
Normalization – Dynamic Time Warping, Multiple Time – Alignment Paths.
Hidden Markov Models: Markov Processes, HMMs – Evaluation, Optimal State Sequence – Viterbi Search,
Baum-Welch Parameter Re-estimation and Implementation issues.
Large Vocabulary Continuous Speech Recognition: Architecture of a large vocabulary continuous speech
recognition system – acoustics and language models – n-grams, context dependent sub-word units;
Applications and present status.
Text-to-Speech Synthesis: Concatenative and waveform synthesis methods, sub-word units for TTS,
intelligibility and naturalness – role of prosody, Applications and present status.
TEXTBOOKS:
1. Lawrence Rabiner and Biing-Hwang Juang, “Fundamentals of Speech Recognition”, Pearson Education,
2003.
2. Daniel Jurafsky and James H Martin, “Speech and Language Processing – An Introduction to Natural
Language Processing, Computational Linguistics, and Speech Recognition”, Pearson Education, 2002.
3. Frederick Jelinek, “Statistical Methods of Speech Recognition”, MIT Press, 1997.
REFERENCES:
1. Applications of Digital Signal Processing to Audio and Acoustics Mark Kahrs, Karlheinz
Brandenburg, KLUWER ACADEMIC PUBLISHERS NEW YORK, BOSTON,DORDRECHT.LONDON, MOSCOW.
2. Thomas F Quatieri, “Discrete-Time Speech Signal Processing – Principles and Practice”, Pearson Education,
2004.
3. Claudio Becchetti and Lucio PrinaRicotti, “Speech Recognition”, John Wiley and Sons, 1999.
4. Ben Gold and Nelson Morgan, “Speech and Audio Signal Processing, Processing and Perception of Speech
and Music”, Wiley- India Edition, 2006.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Flat plate and concentrating collectors, classification of concentrating collectors, orientation and thermal analysis,
advanced collectors. Different methods, Sensible, latent heat and stratified storage, solar ponds.
Solar Applications- solar heating/cooling technique, solar distillation and drying, photovoltaic energy conversion.
OTEC, Principles utilization, setting of OTEC plants, thermodynamic cycles. Tidal and wave energy: Potential and
conversion techniques, mini-hydel power plants, and their economics.
TEXT BOOKS
1. Non-Conventional Energy Sources /G.D. Rai, Khanna Publishers
2. Renewable Energy Resources – Twidell&Wier, CRC Press (Taylor & Francis)
REFERENCE BOOKS
1. Renewable energy resources/ Tiwari and Ghosal/ Narosa.
2. Renewable Energy Technologies /Ramesh & Kumar /Narosa
3. Non-Conventional Energy Systems / K Mittal /Wheeler
4. Renewable energy sources and emerging technologies by D.P.Kothari,K.C.Singhal,
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Telecommunication switching: Message switching, Circuit switching, Manual System, Electronic Switching. Digital
switching: Switching functions, Telecommunication Traffic: Unit of Traffic, Traffic measurement, A mathematical model,
Lost-call systems: Theory, traffic performance, loss systems in tandem, traffic tables. Queuing systems: Erlang
Distribution, probability of delay, Finite queue capacity, Systems with a single server, Queues in tandem, delay tables
and application of Delay formulae.
Single Stage Networks, Link Systems, Grades of service of link systems. Time Division Switching: Space and time
switching, Time division switching networks, Synchronization, Call processing Functions, Common Control, Reliability,
Availability and Security. Signaling: Customer line signaling. FDM carrier systems, PCM signaling, Inter-register
signaling, Common channel signaling principles, CCITT signaling No. 6, CCITT signaling No. 7, Digital customer line
signaling.
Cellular Concepts 6
Evolution of Wireless systems, Introduction to cellular telephone system, Frequency reuse, Channel Assignment,
Handoff strategies, Cell Splitting, Propagation Mechanism: Free space loss, Reflection, Diffraction, Scattering. Fading
and Multipath: Small scale multipath propagation, Impulse response model of multipath channel. Multiple Access
Techniques-TDMA, FDMA, CDMA
First Generation Cellular Systems, AMPS, GSM Cellular Telephony: Introduction, Basic GSM Architecture, Basic radio
transmission parameters in GSM system, Logical Channels, GSM time hierarchy, GSM burst structure, Description of
call setup procedure, Handover, Modifications and derivatives of GSM. GSM Services, GSM Physical layer: Speech
Coding and decoding, GMSK modulation, Data transmission in GSM: Data Services, SMS, HSCSD, GPRS, EDGE.
Motivation for CDMA use, Spreading Sequences, Basic Transmitter and Receiver schemes, Rake Receiver, IS-95
system: Frequency Range, Downlink transmission, Uplink transmission, Power control, Introduction to 3G mobile
systems: W-CDMA and cdma-2000.
Text Books
1. Theodore S Rappaport, “Wireless Communications Principles and Practice” Second Edition, Pearson Education
2. John C. Bellamy, “Digital Telephony”, Third Edition; Wiley Publications
3. ThiagarajanVishwanathan, “Telecommunication Switching Systems and Networks”; PHI Publications
4. Wayne Tomasi, “Electronic Communications Systems”; 5th Edition; Pearson Education
5. Vijay K Garg, Joseph E Wilkes, “Principles and Applications of GSM” Pearson Education
6. Vijay K Garg, Joseph E Wilkes, “IS-95CDMA and CDMA 2000 Cellular/PCS Systems Implementation” Pearson
Education
7. Mischa Schwartz, “Mobile Wireless Communications”, Cambridge University Press
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Bandwidth Estimation 9
Open Circuit Time Constant Method: Observations & Interpretations, Accuracy of OCτs, Considerations,
Designexamples. Short Circuit Time Constant Method: Background, Observations & Interpretations, Accuracy of SCτs,
Considerations. Delay of a system in cascade, Rise time of systems in cascade, Relation between Rise Time and
Bandwidth.
Text Books
1. Reinhold Ludwig, PavelBretchko, “RF Circuit Design Theory and Applications”, Pearson Education.
2. Thomas H. Lee, “The Design of CMOS Radio-Frequency Integrated Circuits”, Second Edition, Cambridge
Publications.
Reference Books
1. T. Yettrdal, Yunhg Cheng, “Devices modeling for analog and RF COMS circuits design”, John Wiley
publication.
2. Calvin Plett, “Radio frequency Integrated Circuits Design”, Artech house.
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
Concepts and specifications of biomedical signal and system, Bioelectric Signals and Electrodes: Bio-potentials and
their origin: ECG, EEG, EMG, ENG, ERG, EOG, MEG. Resting and action Potentials, Biomedical Instrumentation
System, biomedical transducers, electrodes and their characteristics. Origin of bio potentials. Sources and
contamination of Noise in bio signals, Motion artifacts and skin Impedance.
Cardio Vascular System: Introduction to Heart System, Heart Structure, Functioning of Heart System,
Electroconduction system of the Heart, ECG Electrodes, Electrocardiograph, Interpreting the Electrocardiogram,
Einthoven triangle, other ECG signals, Lead Configurations to measure ECG, ECG, Machine, Heart sounds.
Introduction, Electro conduction system of the heart ,ECG signal parameters & their estimation –Bio-Electric
Amplifiers, Use of multiscale analysis for ECG parameters estimation, Noise & Artifacts, ECG Signal Processing:
Baseline Wandering, Power line interference, Muscle noise filtering – QRS detection, Feature points of ECG and its
classification for Normal and Abnormal state. Nervous System: Nervous System, Structure and functions of Neurons,
Electrical activity of nerve cell, Synapse, Reflex action and Receptors.
Nerve cells and the Nervous System, Anatomy of the nervous system, Structure of brain, EEG signal acquisition, 10-
20 electrode placement, EEG rhythms and waveform - categorization of EEG activity - recording techniques - EEG
applications- Epilepsy, sleep disorders, brain computer interface system and its component, EEG Signal Analysis –
Use of Fourier Transform in EEG Signal Analysis.
(10)
Analog and Digital Signal Processing
Analog Signal Processing: Basics of Instrumentation Amplifier, Isolation amplifier, Grounding and shielding techniques.
Design of Filters for Biomedical field. Basic design Concept, Low Pass and High Pass Filters, Band Pass, Band Stop
and Band Reject Filters. Adaptive Filters: Basic Concept, Principle noise cancellation model, removal of periodic
events using adaptive cancellation, adaptive cancellation of maternal ECG from fetal ECG of Interest.
Digital Signal Processing: Characteristics, frequency domain representation; Stationary and non-stationary bio-signals,
waveform detection, Sampling Theory, Finite data considerations (Edge effects), Z Transform, FIR and IIR filters
specific to event detection of ECG. Computation of diagnostic signal parameters of ECG like Heart rate and QRS
detection using Multivariate analysis like PCA and ICA.
Text Books
1. Joseph J. Carr and John M. Brown, “Introduction to Biomedical Equipment Technology”, 4th
Edition, Prentice Hall, 2000.
2. R. Rangayan, “Biomedical Signal Analysis”, Wiley 2002.
3. John L Semmlow, “Bio-signal and Biomedical Image Processing”, Marcel Dekker.
Reference Books
1. R.S.Khandpur, “Handbook of Biomedical Instrumentation”, Tata McGraw Hill, New Delhi,
2003, Edition-II.
2. Joseph J. Carr and John M. Brown, “Introduction to Biomedical Equipment Technology”, 4th
Edition, Prentice Hall, 2000.
3. Bruce, “Biomedical Signal Processing & Signal Modeling,” Wiley, 2001
4. Rangaraj M. Rangayyan, AkayMetin(Editor),Biomedical Signal Analysis: A Case Study
Department of Electronics and
MIT SCHOOL OF ENGINEERING, PUNE
Communication Engineering
For project phase-II, student needs to complete hardware assembly, software programming, testing, Enclosure design
and fabrication, preparation checking and correcting the draft copy of the report and group demonstration of the
complete project.
The department will constitute one or more evaluation boards for continuous monitoring of the projects. The boards will
examine day to day records and conduct viva-voce and/or oral presentation of the students. The department, at the
discretion, may invite external members to viva-voce boards.
At the end of the semester a certified copy of project report bound book in prescribed format need to be presented to
the to the project examiners.
The examination shall be conducted by two examiners (Project supervisor and External examiner)
Continuous assessment and final examination shall be based on the project work, project report and viva-voce.