Академический Документы
Профессиональный Документы
Культура Документы
SPECIFICATIONS:
i. a. Design manufacture : BS 5155/AP1 609/EN 593
b. Testing code : BS 5146 / API 598 / EN 12266 part 1/
EN10204
ii. Type : Wafer design, Integral / Replaceable Resilient
seat, Bubble tight shut off
iii. Design class rating : PN 16
iv. End connection : Wafer design suitable for ANSI B 16.5
flanges, 150#
v. Operating pressure : 12 bar
vi. Maximum operating : As per PN 16 class rating
pressure for testing of
Valves
vii. Material of construction
Body : CI/CS/SG BS 2789 GR 420 /12 / EN 1561 Gr.
EN-JL 1040
Disc : AISI SS316 / ASTM A351 GR CF8M
Shaft (Top & Bottom) : AISI SS 410
Seat : EPDM / NEOPRENE
Handle/worm gear : MS, Powder / Epoxy Coated
viii. Name plate Tag : SS
ix. Bearing To be specified
x Manual Operation : Throttling lever for 50 & 100NB size
Worm type Gear unit for rest of the sizes
xi Locking provision for : Yes; To be provided for fully open & fully
handle/ Wheel closed position of valve.
General conditions:
1. Dimensional drawing indicating parts and their material of construction including shall be sent for
approval after receipt of order.
4. Painting: Outer surface of the valve body, Gear unit & wheel shall be painted with epoxy paint
( Primer: Minimum 60 Microns and Finish coat: Minimum 40 Microns)
Total DFT of paint shall be 100 to 120 Microns.
Paint Shade : Azure blue
5. SS Tag numbering plates of Size 50mm x15mmx 1.5mm thick shall be riveted on valve body at a
prominent location.