Академический Документы
Профессиональный Документы
Культура Документы
beyond
Written by LeeSmith
What you will need is a (1) roll of colored twine and a (2) plumb bob.
1. Look around the area to make sure that you will not damage or break
anything when you toss the plumb bob over the object your trying to
measure.
2. Once over the object, extend the twine till the plumb bob touches the
ground or pad.
3. With the roll end of the twine look around to find a point you can drag the
twine across. At that point, mark the twine with a reference mark. This can
be a Sharpe mark, piece of tape around the twine, or a knot.
4. With the mark set on the twine, drag the twine across the point till it
comes to the first object you want to locate.
6. Continue with the same process if there is another point you need locate.
8. Clip the twine at the first mark to something solid, that you can attach a
tape measure to.
9. Stretch out the twine along with you tape measure till you find the second
mark. Read distance.
10. Continue to you have all you marks measured, either continuous from
the first mark or distances from mark to mark.