Вы находитесь на странице: 1из 8

c StefPro. Stefan Nannen 2005 - 2008 www.stefpro.de info@stefpro.

de data:
21.02.08
7 segments X51
Help file
Version 3.0
This program is Freeware and therefore the use on own danger.
It becomes no liability ubernommen.
Instruction manual, 7 segments X51 V3.0, Rev 014 side 1 of 13,
c StefPro. Stefan Nannen 2005 - 2008 www.stefpro.de info@stefpro.de data:
21.02.08
Table of contents
License:........................................................................
......................................................... ..3
System prerequisites:...........................................................
........................................... .4
Ubersicht.......................................................................
....................................................... .5
Installation hints:.............................................................
............................................ ...6
1. Help, info and Close.........................................................
................................................ .6
2.Display.......................................................................
....................................................... ..7
3. Sign bit of Place............................................................
...................................................... ...8
4. Signs Configuration..........................................................
............................................... ...9
5. Specific Sign's and Specific Sign's
menu..................................................................... ...10
6. Make data table..............................................................
.............................................. ...12
You should, we help have problems or questions gladly for you further.
A quick enamel at info@stefpro.de.
Fur Updates see you purely with www.stefpro.de.
Instruction manual, 7 segments X51 V3.0, Rev 014 side 2 of 13,
c StefPro. Stefan Nannen 2005 - 2008 www.stefpro.de info@stefpro.de data:
21.02.08
License:
Author of the program: Stefan Nannen, StefPro. Software development fur
processors
Product name: 7 segments X51
1. license
-----------
This product was produced fur ausschlieslich free spread by the author and
veroffentlicht. It is allowed to without Einschrankungen
it is passed on at everyone and is put on home page to the Download to the
Verfugung.
No aware performance of all type, there is fur the product.
2. adhesion
-------------
The author of this product of ubernimmt NO liability fur damage of all type,
that through the product, through them/her/it
Utilization of the product or through the non-utilization of the product, here
not aufgezahlte damage smog like ness originates.
In any case, the author of this product cannot be made responsibly for fur
damage of all type.
The product becomes be" put "just like it to the Verfugung. The product was
written with groser diligence, however
all described function of the product could fail through mistakes. Hierfur
ubernimmt the author also none
Liability.
3. aware performance:
-----------------------
An aware performance fur a flawless Funktionalitat of the product doesn't
become ubernommen from the author.
The author ubernimmt no liability fur the flawless ness of the product,
especially not dafur, that the product him/it
Requests and purposes of the acquirer genugt or with others from him/it
ausgewahlten programs works together.
4. copyright
----------------
The program stands under the legal protection of the originator and commercial
laws of the country, in which it veroffentlicht,
vervielfaltigt as well as is used.
The Decompilierung, Disassemblierung or Anderung of the software or the
documentation is absolutely forbidden.
The code as well as code sections of the product durfen only with hint on this
product and the author is used.
This hint must be well visible, also fur the user, who doesn't realize the
source code.
5. dissemination of the product
------------------------------------
The software can be passed on only in the form, in which she/it released the
author. Alternatively, he/it must
Author an expression-like consent gives and an indication of the original
condition of the product must given
becomes.
All rights at this product are left for the author Vorbehalten without
Einschrankungen.
The product cannot be sold without expression-like consent of the author. Just
as little, it is allowed, this
Product, to spread uber Dailersoftware.
6. Abanderungen of the program
------------------------------------------
Provided the source code is enclosed the program, following condition is valid
so:
The origin of the original source code must be noted. This note must the user
of this also in the fur
Program, that cannot realize the source code, good visible is.
7. other
----------------
If one of the regulations, these license regulations, should be ineffective, so
the effectiveness of the ubrigen becomes from it
Regulations not beruhrt.
Instead of the ineffective regulations, such effective regulations are regarded
as arranged, that in her/its/their sense of this
Intent of the ineffective regulations in favor of the author at the nachsten
comes.
Instruction manual, 7 segments X51 V3.0, Rev 014 side 3 of 13,
c StefPro. Stefan Nannen 2005 - 2008 www.stefpro.de info@stefpro.de data:
21.02.08
THE UTILIZATION OF THIS PROGRAM FUR MILITARISCHE, ATOM-TECHNICAL, POLITICALLY
RADICAL,
UND/ODER AUSLANDERFEINDLICHE PURPOSES ARE EXPRESSION-LIKE PROHIBITED.
THE SPREAD OF THE PROGRAM DURCH A PAYABLE DIALER OR OF A KOSTENPLICHTIGEN
WEB PAGE IS ABSOLUTELY FORBIDDEN
At the passing on leisures all files existing is:
. 7 segments X51.exe
. 7 segments X51-config.inf
. 7 segments X51-hilfe.pdf
. 7 segments X51-linzenz.txt, cannot become verandert!)
Left, konnen without demand on the program happen, a notification ware however
nice.
The program cannot become vertrieben/verkauft under own name, an authorization
needs this through him/it
Copyright owners.
The copyright owner keeps all rights for himself before:
StefPro. Software development fur processors
Stefan Nannen
26345 buck mandrels
Germany
Telephone: +49-4452-709175
e-mail: info@stefpro.de
weave: http://www.stefpro.de /
System prerequisites:
. Framework. NET 1.0
. Windows Vista
. Windows XP Home Edition
. Windows XP professional
. Windows 2000 professional
. Windows NT 4.0
. Windows millennium Edition (m)
. Windows 98
. Least requests processor: 90 MHz, tone Framework prerequisites,
. Least requests storage (RAM): 32 MByte
. Bildschirmauflosung: 800 x 600 256 colors
Instruction manual, 7 segments X51 V3.0, Rev 014 side 4 of 13,
c StefPro. Stefan Nannen 2005 - 2008 www.stefpro.de info@stefpro.de data:
21.02.08
Ubersicht
Exact Erklarungen on the following sides.
Instruction manual, 7 segments X51 V3.0, Rev 014 side 5 of 13,
Make data table.
, Edition field fur this
7 - segment table,
CHAPTERS 6.
Display
, Separate loin
Bit or
Ads
Anklickbar,
CHAPTERS 2.
Help
, This auxiliary file,
Info
, www.StefPro.de,
Close
, To the schliesen of this
Program,
CHAPTERS 1.
Signs
Configuration
, Edition format
puts in,
CHAPTERS 4.
Sign bit
place
, Individuals bits
allots,
CHAPTERS 3.
Specific Sign's
, To the produces
and storages
from special
Signs,
CHAPTERS 5.
Specific Sign's Menu
(Storage) drawer and
Auswahlmoglichkeiten
fur Specific Sign's,
CHAPTERS 5.
c StefPro. Stefan Nannen 2005 - 2008 www.stefpro.de info@stefpro.de data:
21.02.08
Installation hints:
Since program will give up a Setup with this program, konnen you the program
directly
in the ZIP uses or you konnen also following files into an any steward
entpacken:
7 segments X51.exe
. 7 segments X51-config.inf
. 7 segments X51-hilfe.pdf
. 7 segments X51-linzenz.txt
In order to produce a Verknupfung, you print Maustaste with the rights: " 7
segments
X51.exe " Verknupfung produces and pulls this Verknupfung at an any place.
1. Help, info and Close
Help:
With the Help button konnen you this auxiliary file calls.
Info:
With the info Button, you come on www.stefpro.de.
Close:
With the Close button schliesen you the program.
Donations:
With the Donations button konnen you the development this Programmes
under-stops short. You/they reach
on the web page this Programmes and konnen a donation tatigen.
Instruction manual, 7 segments X51 V3.0, Rev 014 side 6 of 13,
Illustration 1: Help, info and Close
c StefPro. Stefan Nannen 2005 - 2008 www.stefpro.de info@stefpro.de data:
21.02.08
2.Display
The group Display from illustration
the Display puts 3 there, where
each LED one and turned off
it can become.
LED's this is switched on
shines red, turn off becomes
gloomily red represented.
The names of the segments is, like
with substantial 7 segment Display's from
Illustration 2 ublich, from An until G.
P reprasentiert the decimal point,
however, this can in the Signs
Configuration, chapters 4.) is turned off.
Sign:
In the Selectbox Sign, a pre-determined number 0 can until 9 or a representable
letter An until Z (
except k, m, v, w and Z, is loaded. It is of the selection castes P (,
actively, becomes optional
the decimal point automatically as well switched on.
Clear:
By means of Clear, the whole sign can become geloscht, also the sign name
becomes of the further one
(Signname) geloscht.
Signname:
With Signname, a name can be given to the sign, which with the data edition
(Make)
Data table, is used. Remain freely this text field, becomes with the data
edition so
! NONAME! boasted.
Data:
The data fur a 7 segment becomes signs in the Data text field, according to
attitudes in the Menu
Sign bit place, chapters 3.) and Signs Configuration, chapters 4.), spent.
Instruction manual, 7 segments X51 V3.0, Rev 014 side 7 of 13,
Illustration 3: Virtual Display of this
Programmes
Illustration 2: Real 7
Segment ad
c StefPro. Stefan Nannen 2005 - 2008 www.stefpro.de info@stefpro.de data:
21.02.08
3. Sign bit of Place
Group place in the Sign bits, in illustration 4 portrayed,
konnen the Display and bit places together gefuhrt
becomes, because not with the direct Port wiring always
all Port's stand immediately by the Verfugung. An example
is to be seen in illustration 6 and 7.
All segments konnen one bit are assigned. This
Decimal point P can be put addition-like on N.C.
and is turned off consequently.
The representation is fur doubly forgiven in illustration 5
Bit places. <- shows the mistake.
If bits are doubly places forgiven, Display, Specific, becomes so
Sign's and Make data table as long as deactivates faultlessly until the
assignment
is.
With the selection box Invert Output, the edition weighed inverts.
Example assignment
In the example switch plan from illustration 7, G must be put on Px.7. This
Decimal point P is not connected (N.C.).
Instruction manual, 7 segments X51 V3.0, Rev 014 side 8 of 13,
Illustration 4: Sign
Bit place
Illustration 6: Bit
Assignment
Illustration 5: Bit
Assignment with
Mistake news
Illustration 7: Example switch plan
c StefPro. Stefan Nannen 2005 - 2008 www.stefpro.de info@stefpro.de data:
21.02.08
4. Signs Configuration
With the Menu portrayed in illustrations 8, it is this moglich
Edition format as well as fur the compiler, to place specific signs.
Number format:
Under Number format, this leaves itself edition selections pay format,
which Binar (BE), decimal, DEC, or Hexadezimal,
, DOES MAGIC, can be.
For C compilers:
In the SelectBox, that lies under Number format, can ausgewahlt
the data shall become generate which compiler fur. It
if Batronix gets along 51 assemblers, AVR assemblers and as to see of CCompiler
to the Verfugung. Wunschen you another, writes so
You/they please an e-mail at info@stefpro.de, with the specifications.
Is, do magic, Dec:
So that a compiler recognizes the correct pay format benotigt by this this a
Pre. as well as post fix
Numbers. The Pre. as well as post fix, every pay format can become certain fur
in the 6 text fields.
Consequently, it also is fur moglich another compiler to generate the data.
DataByte Sign:
This text field is compilers activated only with assembler. There, the
Schlusselwort fur can constant
Data (DB) registered becomes.
Comment Sign:
In the Comment Sign text box, the commentary sign is written down fur the
compiler.
Data ace Array:
If the Auswahlkastchen become write an Array ausgewahlt in a line so, those
become otherwise
Data among each other written.
Hint: when generating fur the AVR assembler compilers always should be taken
Array,
since a hoherer storage area consumption originates otherwise.
Examples fur data editions are to be found in the chapter 6.
Instruction manual, 7 segments X51 V3.0, Rev 014 side 9 of 13,
Illustration 8: Signs
Configuration Menu
c StefPro. Stefan Nannen 2005 - 2008 www.stefpro.de info@stefpro.de data:
21.02.08
5. Specific Sign's and Specific Sign's menu
Illustration 10: Specific Sign's
Simple talks 7 segments of display with box:
With this Selectbox, the look can become the 7 segment of Displays ausgewahlt,
on the following one
Some example pictures are portrayed side.
Always P:
The selection castes' Always P wahlt from whether the decimal point should also
be shown, if he/it
Decimal point connected not, in the Menu Sign bit Place P on N.C., is.
+ = as well as + =
Save Picture:
With the button of Save Picture, the picture from the picture box can fur
documentation purposes as BMP,
GIF or JPG are stored.
Print Picture:
Print the represented picture of the 8 ads on the printer.
Load. S7D g and Save. S7D g:
Load. S7D g offnet a drawer dialogue with the one. Specific 7 segments Data g.
File geoffnet becomes
can, this then is shown by illustration 10 in the picture box.
Save. S7D g offnet a storage dialogue the Specific Sign's stored in one.
Specific 7 segment
Data g. File becomes konnen.
^:
Ladt the sign of the Display group.
Instruction manual, 7 segments X51 V3.0, Rev 014 side 10 of 13,
Illustration 9: Specific Sign's menu
Picture box
c StefPro. Stefan Nannen 2005 - 2008 www.stefpro.de info@stefpro.de data:
21.02.08
Display X:
Selection which sign should be processed.
Picture box:
The picture box represents 8 ads, these konnen directly are processed. A mouse
click becomes on
an ad ausgefuhrt, so the sign is loaded in Display and can be processed there.
Example pictures:
Illustration 11: Simplistic blue 7 segment display with box
Illustration 12: Simplistic blue 7 segment display without box
Illustration 13: If LED speaks behind Plexiglass
Illustration 14: Only speaks LED's
Illustration 15: Simplistic yellow 7 segment display with box
Instruction manual, 7 segments X51 V3.0, Rev 014 side 11 of 13,
c StefPro. Stefan Nannen 2005 - 2008 www.stefpro.de info@stefpro.de data:
21.02.08
6. Make data table
Illustration 16: Make data table Menu
P on/off:
With the selection box of P on/off, the decimal point can when generating
number data with
is switched on.
+ Letters:
With the selection box + Letters is it moglich, addition-like also letter data
to the number data
, to generate.
numbers from 0 to 9 and addition-like letters An until F
numbers from 0 to 9 and addition-like letters An until Z, except k, m, v,
w and Z,
Make number data:
Generate number data slope-y from the prior selection castes.
Make specific sign data:
Generate specific signs.
Save data:
If stores the content of the text field in a header file (*. h, C-Datei (*. c,
assemblers file
(*. asm, or as text file (*. txt.
Instruction manual, 7 segments X51 V3.0, Rev 014 side 12 of 13,
c StefPro. Stefan Nannen 2005 - 2008 www.stefpro.de info@stefpro.de data:
21.02.08
Example:
Preparation of a specific text.
Not as Array Als Array
Batronix 51
Assemblers
;7 segments specific font table. Generated with "7 segments X51"
powered by StefPro.
; Please checks names for names duplicate and with "! NONAME"!
Indicated. This leads to at error when compiling!
DISPLAY_7SEG_Specific_Tab:
DB 10h; H deficits
DB 50h; H R
DB 70h; H half
DB 72h; H almost completely
DB 76h; H complete
DB 0h;
DB 0h;
DB 0h;
;7 segments specific font table. Generated with "7 segments X51" powered by
StefPro.
; Please checks names for names duplicate and with "! NONAME"! Indicated.
This leads to at error when compiling!
DISPLAY_7SEG_Specific_Tab:
; SIGN's: H deficits, H r, H half, H almost completely, H completely! no name!
! no
name! ! no name! ,
DB 10h, 50h, 70h, 72h, 76h, 0h, 0h, 0h
AVR
Assemblers
;7 segments specific font table. Generated with "7 segments X51"
powered by StefPro.
; Please checks names for names duplicate and with "! NONAME"!
Indicated. This leads to at error when compiling!
DISPLAY_7SEG_Specific_Tab:
. db 0x10; H deficits
. db 0x50; H R
. db 0x70; H half
. db 0x72; H almost completely
. db 0x76; H complete
. db 0x0;
. db 0x0;
. db 0x0;
;7 segments specific font table. Generated with "7 segments X51" powered by
StefPro.
; Please checks names for names duplicate and with "! NONAME"! Indicated.
This leads to at error when compiling!
DISPLAY_7SEG_Specific_Tab:
; SIGN's: H deficits, H r, H half, H almost completely, H completely! no name!
! no
name! ! no name! ,
. db 0x10, 0x50, 0x70, 0x72, 0x76, 0x0, 0x0, 0x0
C-Compiler / /7 segments specific font table. Generated with "7 segments X51"
powered by StefPro.
/ / Please checks names for names duplicate and with "! NONAME"!
Indicated. This leads to at error when compiling!
/ / DISPLAY_7SEG_Specific_Tab:
#define SIGN_H_MINUS 0x10 / / H deficits
#define SIGN_H_R 0x50 / / H r
#define SIGN_H_HALB 0x70 / / H half
#define SIGN_H_FAST_GANZ 0x72 / / H almost completely
#define SIGN_H_KOMPLETT 0x76 / / H complete
#define SIGN_!NOMAME! 0x0 / /
#define SIGN_!NOMAME! 0x0 / /
#define SIGN_!NOMAME! 0x0 / /
/ /7 segments specific font table. Generated with "7 segments X51" powered by
StefPro.
/ / Please checks names for names duplicate and with "! NONAME"! Indicated.
This leads to at error when compiling!
/ / SIGN's: H deficits, H r, H half, H almost completely, H completely! no
name! ! no
name! ! no name! ,
const unsigned char DISPLAY_7SEG_Specific_Tab [] = {0x10, 0x50,
0x70, 0x72, 0x76, 0x0, 0x0, 0x0};
Signs this is not used, as still in the example picture from illustration 17,
leisures by hand
geloscht becomes. Here therefore the last 3 lines little lot.
c StefPro - Stefan Nannen, Germany 2008,
Instruction manual, 7 segments X51 V3.0, Rev 014 side 13 of 13,
Illustration 17: Specific signs, here a developing one animation MR.

Вам также может понравиться