Академический Документы
Профессиональный Документы
Культура Документы
www.piezo-tech.com
HISTORY
2
CONTENTS
1. EV-KIT ----------------------------------------- 4
3. APPENDIX ---------------------------------------- 14
3
1. EV-KIT
1.1 INTRODUCTION
4
1.2 SPECIFICATION
1.3 LAYOUT
SB 6 Signal TM
lines
5
1.4 PIN DESCRIPTION
1) P1
7 Power DC 12V
8, 15 Ground GND
14 Power DC 5V
2) P2
2 RX RX
3 TX TX
5 Groud GND
3) P3
PIN DESCRIPTION
1 Out_A
9 Out_B
6 VDD 30V
7 VDD 12V
14 VCC 5V
8, 15 GND
6
2. DEMO PROGRAM
2.1 INSTALLATION
1) Insert CD-ROM disc of “Piezo Demo Program” and copy the Execution folder in your
computer or other restore devices.
2) Run PiezoSdemo.exe.
⇒ The following window appears.
7
2.2 SETTING AND OPERATION
8
4) If you click “Port” again, communication port is closed
9
5) Write the proper value of Frequency and Pulse in textbox according to the type of
TULA and click the button of them.
Note : the value of Pulse must be “+50” until setup is completed
10
7) Click “Home” button. If its operation is completed, the current
position of TULA will be zero and displayed.
11
9) Now, you are ready to operate TULA
10) If you click “ Clear” button, all data on “Received data” window
will be disappeared.
11) If you click “Motor Start” button, TULA will move with “+10” pulses.
After operating, current position and displacement are displayed.
Change the sign and value of Pulse to move TULA back and forth,
and to increase or decrease the displacement.
12
12) Click “ Current Position” button to know the distance from
home position.
13) If you click “Motor Stop” button, the operation of TULA will be
terminated at once.
13
3. APPENDIX
14
3.2 FUNCTION OF BUTTON
Home “SH”
Thanks for giving your interest to piezoelectric technology’s products. You should expect the
highest level of quality of our products. If you have any questions about principles of USM
(Ultra Sonic Motor) or get more information of EV-KIT, please call piezoelectric technology.
15