Академический Документы
Профессиональный Документы
Культура Документы
Haryana
Version 2.0
Version Control
Version Date Prepared by Reviewed by Approved by Remarks
Srinivasan The strategy is prepared considering 20Mhz TDD, 15 Mhz L1800 , 10 Mhz L2100 and 5 Mhz on UMTS. For sites which deviate from these configuration minor changes need to be done. TDD
1 10-Jan-19 Ani Padmarajan Kiran Sengupta
Kannan qrxlevmin has been set to -115. Calls in both idle mode and dedicated mode(volte and data) will exit TDD at -110.
Srinivasan
2 1-Mar-19 Ani Padmarajan Kiran Sengupta TDD qrxlevmin changed to -124. Idle mode relesection from TDD to FDD and dedicated mode inter-frequency HO threshold for TDD to FDD relaxed to -116 from current setting of -110.
Kannan
L2500-L2100-L1800-U2100-GSM
Snapshot L2500 – TDD
20 Mhz
TDD 2500 layer has the highest priority followed by FDD 2100,FDD 1800,
WCDMA and GSM.
Volte has been enabled for both TDD and FDD layers.
L2100 – FDD
Load balancing is activated between the LTE 2100 and LTE 1800 to ensure
10 Mhz
better end user experience.
Load Balancing is activated from L2500 towards L1800. No load balancing is
activated towards L2500 from both FDD layers.
No handovers defined on L1800 and L2100 layers towards L2500 as 2500 L1800 – FDD
spectrum is in the lower part of Band 41 15 Mhz
Load Balancing has not been enabled between WCDMA and LTE.
Volte users have been excluded from Load Balancing.
SRVCC has been enabled for Volte in all LTE layers towards both WCDMA and
U2100 5 Mhz
GSM.
No handover (NACC) is defined in Dedicated mode for Data from 4G layers
towards GSM.
No handovers are defined from GSM towards WCDMA.
GSM
L25 RSRP < -116 L21 RSRP > -110 L25 RSRP > -112
L25 RSRP < -116
L18 RSRP > -110
L21 RSRP < -116 L18 RSRP > -112 L21 RSRP > -112
L21 RSRP > -112
Parameter Name GUI Value Internal Value Actual Value GUI Value Internal Value Actual Value GUI Value Internal Value Actual Value Remarks
Qrxlevmin -124 -124 -124 dBm -124 -124 -124 dBm -124 -124 -124 dBm Minimum required level for access
qRxLevMinUtra -115 dBm -115 -115 dBm -115 dBm -115 -115 dBm -115 dBm -115 -115 dBm Minimum required level to access WCDMA cell
qRxLevMinGer -105 dBm -105 -105 dBm -105 dBm -105 -105 dBm -105 dBm -105 -105 dBm Minimum required level to access GSM cell
interFrqThrH 12 dB (2100) 12 -112 dbm NA NA NA NA NA NA Reselection towards higher priority LTE layer
Sintrasearch 44dB 44 -80dbm 44dB 44 -80dbm 35dB 35 -80dbm threshold to start intra-frequency measurements
Snonintrsearch 10dB 10 -114 dbm 10dB 10 -114 dbm 10dB 10 -114 dbm threshold to start measuring lower priority layers
threshSrvLow 8dB 8 -116 dbm 8dB 8 -116 dbm 8dB 8 -116 dbm Reselection towards lower priority LTE/WCDMA/GSM layer
interFrqThrL NA NA NA 12dB (2100) 12 (2100) -112 dbm 14dB (2100) 12 (2100) -110 dbm minimum required level of lower priority LTE layer for cell reselection
utraFrqThrL 6dB 6 -109 dbm 6dB 6 -109 dbm 6dB 6 -109 dbm minimum required level of WCDMA layer for cell reselection
gerFrqThrL 0 dB 0 -105 dbm 0 dB 0 -105 dbm NA NA NA minimum required level of GSM layer for cell reselection
L25 RSRP < -116 L21 RSRP < -104** L25 RSRP > -112 **
L21 RSRP > -110
L25 RSRP < -116
L18 RSRP > -110 L18 RSRP < -104 **
L2100 - FDD L2100 - FDD L25 RSRP > -112
L21 RSRP < -116 L18 RSRP > -112 L18 RSRP < -116 L21 RSRP > -114
U2100 U2100
GSM GSM
** No Handovers to be defined from L1800 and L2100 towards L2500 as 2500 spectrum is in the lower part of Band 41. As penetration of devices
supporting lower part of band 41 increases we will re-assess the strategy.
Dedicated Mode Mobility - Data
Parameter Settings
L1800 L2100 L2500
Parameter Name GUI Value Internal Value Actual Value GUI Value Internal Value Actual Value GUI Value Internal Value Actual Value Remarks
threshold1 -80 dBm 60 -80 dbm -80 dBm 60 -80 dbm -80 dBm 60 -80 dbm threshold to start searching intra frequency neighbour cells
actIfHO Enable 1 Enable 1 Enable 1 Switch for Activating Inter frequency HO's
threshold2InterFreq -112 dBm 28 -112 dBm -112 dBm 28 -112 dBm -112 dBm 28 -112 dBm threshold to start searching inter frequency neighbours
threshold3InterFreq -116 dbm (2100) 24 -116dbm -116dbm (1800) 24 -116dbm -116 dbm(2100) 24 -116 dbm threshold to trigger a A5 HO to inter frequency neighbour
threshold3aInterFreq -114dbm(2100) 26 -114 dBm -112dbm(1800) 28 -112dbm -110 dbm(2100) 30 -110 dbm qualification criteria for inter-frequency neighbour for a A5 HO
threshold2a -110 dBm 30 -110 dBm -110 dBm 30 -110 dBm -110 dBm 30 -110 dBm threshold to stop searching inter-frequency/Wcdma/Gsm neighbours
hysthreshold2Wcdma 0 dB 0 0 dB 0 0 dB 0
a2TimeToTriggerActWCDMAMeas 2560ms 14 2560ms 14 320ms 8 subject to change in FL18 with SRVCC delay timer
b2TimeToTriggerUtraMeas 1280ms 13 1280ms 13 320ms 8 subject to change in FL18 with SRVCC delay timer
b2Threshold1Utra -118 dBm 22 -118 dbm -118 dBm 22 -118 dbm -118 dBm 22 -118 dbm threshold to trigger a B2 HO to WCDMA neighbour
b2Threshold2UtraRSCP -105 dBm 10 -105dbm -105 dBm 10 -105dbm -105 dBm 10 -105dbm qualification criteria for WCDMA neighbour for a B2 HO
b2Threshold2UtraECNO -14 dB -14 -14 dB -14 -16 dB -16 qualification criteria for WCDMA neighbour for a B2 HO
hysB2ThresholdUtra 0 dB 0 0 dB 0 0 dB 0
threshold4 -120 dBm 20 -120 dBm 20 -120 dBm 20 blind re-direct threshold
L1800 - FDD
L1800 - FDD
L21 RSRP < -116 LTE RSRP < -118
U21 EcNo > -14 GSM RxLev > -100
L18 RSRP < -116 U21 EcNo > -14
No Handovers
U2100
U2100
GSM
GSM
** Trials are being carried out to arrive at the best value to move a Volte call from TDD to FDD layer. Based on the results the threshold will be tuned to
achieve the best Volte experience.
Dedicated Mode Mobility - Volte
Parameter Settings
L1800 L2100 L2500
Parameter Name GUI Value Internal Value Actual Value GUI Value Internal Value Actual Value GUI Value Internal Value Actual Value Remarks
threshold2aQci1 -110 dBm 30 -110 dBm -110 dBm 30 -110 dBm -106 dBm 34 -106 dBm threshold to stop searching inter-frequency/Wcdma/Gsm neighbours
threshold2InterFreqQci1 -112 dBm (2100) 28 -112 dBm -112 dBm (1800) 28 -112 dBm -108 dBm 32 -108 dBm threshold to start searching inter frequency neighbours
a3OffsetRsrpInterFreqQci1 15 dB (2500) 30 15 dB 15 dB (2500) 30 15 dB 15 dB (2100) 30 15 dB a3 offset for FDD <----> TDD Volte HO
threshold3InterFreqQci1 NA (2100) NA (2100) -114dbm (1800) 26 -114 dBm -110 dBm (2100) 30 -110dbm threshold to trigger inter-frequency volte HO
threshold3aInterFreqQci1 NA (2100) NA (2100) -110 dBm(1800) 28 -110 dBm -108 dBm(2100) 32 -108 dBm qualification criteria for inter-frequency neighbour volte HO
b2Threshold1UtraQci1 -116 dBm 24 -116 dBm -116 dBm 24 -116 dBm -116 dBm 24 -116 dBm threshold to trigger HO to WCDMA
b2Threshold2UtraEcn0Qci1 -14 db 20 -14 db -14 db 20 -14 dB -14 dB 20 -14 db EcNo qualification criteria for WCDMA neighbour
b2Threshold2UtraRSCPQci1 -105 dBm 10 -105 dBm -105 dBm 10 -105 dBm -105 dBm 10 -105 dBm RSCP qualification criteria for WCDMA neighbour
threshold2geranQci1 -116 dBm 24 -116 dBm -116 dBm 24 -116 dBm -116 dBm 24 -116 dBm threshod to start searching GSM
b2Threshold1geranQci1 -118 dBm 22 -118 dBm -118 dBm 22 -118 dBm -118 dBm 22 -118 dBm threshold to trigger HO to GSM
b2Threshold2RssiGERANQci1 -100 dBm -100 dBm -100 dBm -100 dBm -100 dBm -100 dBm qualification criteria for GSM neighbour
a2TimeToTriggerActGERANMeas 2560ms 14 2560ms 2560ms 14 2560ms 320ms 8 320ms subject to change in FL18 with SRVCC delay timer
b2TimeToTriggerGERANMeas 1280ms 13 1280ms 1280ms 13 1280ms 320ms 8 320ms subject to change in FL18 with SRVCC delay timer
hysB2ThresholdGERAN 0 dB 0 0 dB 0 dB 0 0 dB 0 dB 0 0 dB
hysthreshold2GERAN 0 dB 0 0 dB 0 dB 0 0 dB 0 dB 0 0 dB
Note: