Академический Документы
Профессиональный Документы
Культура Документы
Built Environment
Buildings Surroundings
Choosing a building’s site and managing that site during construction are important
considerations for a project’s sustainability.
The sustainable sites category discourages development on previously undeveloped land;
minimizes a building’s impact on ecosystems and waterways; encourages regionally appropriate
landscaping rewards smart transportation choices; controls storm-water runoff, and reduces
erosion, light pollution and construction related pollution.
The foundation of any construction project is rooted in the concept and design stages.
The concept stage, in fact, is one of the major steps in a project life cycle, as it has the largest
impact on cost and performance.
In designing environmentally optimal buildings, the objective is to minimize the total
environmental impact associated with all life-cycle stages of the building project.
2. Water Savings
Buildings are major users of our potable water supply.
The goal of the water efficiency credit category is to encourage smarter use of water, inside and
out.
Water reduction is typically achieved through more efficient appliances, fixtures and fittings
inside and water-wise landscaping outside.
The Green Building by its design shall not disrupt the natural flows.
Rain falling over the whole area of complex shall be harvested in full either to replenish the
ground water table in and around the building or to be utilized in the services of the building.
Grey water from kitchenette, bath and laundry shall be treated and reused for gardening or in
cooling towers of air-conditioner.
3. Energy Efficiency
The energy and atmosphere category encourages a wide variety of energy strategies: energy use
monitoring; efficient design and construction; efficient appliances, systems and lightings; the use
of renewable and clean sources of energy, generated on-site or off-site; and other innovative
strategies.
The solar energy at the top of a green building is harvested to supplement the conventional
energy.
The natural light is harvested on the intermediate floors to minimize the usage of electricity.
High efficiency windows and insulation in walls, ceilings and floors are used for the benefit of
better temperature control.
4. Materials and Resources
During both the construction and operation phases, buildings generate a lot of waste and use a
lot of materials and resources.
This credit category encourages the selection of sustainable grown, harvested, produced and
transported products and materials.
It promotes the reduction of waste as well as reusing and recycling, and it takes into account the
reduction of waste at a product’s source.
5. Indoor Environmental Quality
It is estimated that Indians spend about 90% of their day indoor at their residences, schools and
workplaces, where the air quality can be significantly worse than outside.
The Indoor Environmental Quality credit category promote strategies that can improve indoor
air as well as providing access to natural daylight and views and improving acoustics.
In a designed green building the occupants shall feel as if they are in outdoor location.
The interior and exterior designs shall go hand in hand by blending the natural and artificial
lighting and presenting transparent views wherever possible.
6. Innovation in Design
This category provides bonus points for projects that use new and innovative technologies and
strategies to improve a building’s performance well beyond what is required by other credits or
in green building consideration that are not specifically addressed elsewhere in the rating
system.
This category also rewards projects for including an Accredited Professional on the team to
ensure a holistic, integrated approach to the design and construction phase.
Green Building Rating Systems provide a roadmap for measuring and documenting success for
every building type and phase of building lifestyle.
7. Landscaping
The landscaping and the exterior design in a green building shall be in such a way that there is
more shaded area, the light trespass is eliminated and local species of plants are grown.
8. Waste Reduction
Green architecture also seeks to reduce waste of energy, water and materials used during
construction.
Well designed buildings also help reduce the amount of waste generated by the occupants as
well, by providing on-site solutions such as compost bins to reduce waste.
9. Cost and Payoff
The most criticized issue about constructing environmentally friendly buildings is the price.
New- appliances and modern technologies tend to cost more money.
Most green buildings cost a premium of <2%, but yield 10 times as much over the entire life of
the building.
10. Regulation and Operation
No matter how sustainable a building may have been in its design and construction, it can only
remain so if it is operated responsibly and maintained properly.
Ensuring operations and maintenance personnel are part of the project’s planning and
development process will help retain the green criteria designed at the onset of the project.
Every aspect of green building is integrated into the operation and maintenance phase of a
building’s life.
The addition of new green technologies also fall in this category.
11. Life Cycle Assessment
A life cycle assessment can help avoid a narrow outlook on environmental, social and economic
concerns by assessing a full range of impacts associated with all cradle-to-grave stages of a
process: from extraction of raw materials through material processing, manufacture,
distribution, use, repair and maintenance, and disposal or recycling.
Impacts taken into account include, global warming potential, resource use, air pollution, water
pollution and waste.
Does Going Green Really Cost More?
Some people feel that they just can’t go green because it will cost them more money, but that is
really a common misconception.
It may cost you more to get started when you are going green, because green materials and
products can be more costly, you really have to consider the type of savings that you will be able
to reap.
You will be able to save on energy costs because going green also means conserving energy.
You should really look at the green building as more of an investment than anything else.
An investment that will be able to save you money, as well as an investment that will be able to
help the environment. It is a win-win situation for everyone.
Rating Systems:
International Green Building rating systems such as LEED, BREEAM(Building Research
Establishment Environmental Assessment Method), Green Globes and Green Star are tools
developed to rate and/or quantify the performance of buildings against defined guidelines.
Specific rating systems for residential development also have been developed. These rating
systems rely on the achievement of defined credits or points based on performance and/or
prescriptive parameters for evaluating the Green quotient of the building.
Currently in India, there are 3 green building rating systems that are applicable to residential
development- GRIHA(Green Rating for Integrated Habitat Assessment), IGBC (Indian Green
Building Council) & BEE (Bureau of Energy Efficiency)
All the 3 rating systems are similar in their overall intent and broad focus areas, differences lie in
the evaluation requirements of the parameters.
India is currently witnessing a construction boom owing to rapid urbanization and the increased
housing and infrastructural needs of a growing population.
When the IGBC(Indian Green Building Council) was established in 2001, one green building with
a floor area of 1858 sq.m. marked the beginning of green buildings in India. Today, more than
2100 IGBC certified buildings occupy almost 140 million sq.m.
Following are the rating systems:
1. LEED (US)
2. BREEAM (UK)
3. CASBEE (Japan)
4. DGNB (Germany)
5. Green Star (Australia)
6. IGBC/LEED (India)
7. TERI-GRIHA (India)
8. BEE (India)
THANKYOU……