Академический Документы
Профессиональный Документы
Культура Документы
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
Komatsu PC200-6 / PC300-6 / PC400-6 / PC200-7 fault code, user code (displayed automatically when there
is a fault) Code:
E01, HYPER system in automatic mode systems.
E02, PC-EPC system.
E03, Swing parking brake system.
E04 + CALL, HYPER system joystick-bit systems.
E05, governor motor system.
E06 + CALL, HYPER system EPC solenoid valve drive system.
E09, HYPER-GX system shutdown. CALL, HYPER joystick and EPC solenoid valve drive system.
Komatsu PC200-8 using EFI engine, the user code and PC200-6 / 7 there is a big difference.
PC200-8 user code:
E02, PC-EPC system.
E03, Swing parking brake system.
E10, engine controller power failure, the engine control drive system circuit fault (this engine is stopped.
E11, engine control system failure (reduction of output power, to protect the engine).
E14, feedback system abnormalities.
E15, engine sensors (temperature, fuel pressure, oil pressure) fault.
EOE, network failure.
Fault code:
989L00, engine controller lock warning (mode 1).
989M00, warning the engine controller lock (mode 2).
989N00, engine controller lock warning (mode 3).
Komatsu excavator Komatsu PC220-8 latest EFI engine SAA6D107 engine, the user code and the old
Komatsu excavator quite different.
Komatsu excavator PC220-8 user code: E02, PC-EPC system. E03, Swing parking brake system. E10, engine
controller power failure, the engine control drive system circuit fault (this engine stall .E11, engine
control system failure (decrease output power, in order to protect the engine) .E14, feedback system
abnormalities .E15, engine sensors (temperature, fuel pressure, oil pressure) failure .EOE, network
failure error code:. 989L00, engine controller lock warning (mode 1) .989M00, engine controller lock
warning (mode 2) .989N00, engine controller lock warning (mode 3) .AA10NX, air filter clogged .AB00KE,
the charging voltage is too low .B @ BAZG, engine oil pressure is too low .B @ BAZK, the oil level is too
low .B @ BCNS, engine coolant overheating .B @ BCZK, coolant level is too low. hydraulic oil overheating
.CA111, engine controller internal fault .CA115, engine speed sensor and backup speed sensor fault
.CA122, intake air pressure sensor feedback voltage is too high failure .CA123, intake air pressure sensor
feedback voltage is too low failure .CA131, throttle plate sensor feedback voltage high failure .CA132,
throttle plate sensor feedback voltage low failure .CA144, coolant temperature sensor feedback voltage is
too high failure .CA145, coolant temperature sensor feedback voltage is too low failure .CA153, intake
temperature sensor feedback voltage is too high failure .CA154, intake air temperature sensor feedback
voltage is too low failure .CA155, intake air temperature is too high (over limit) .CA187, sensor supply 2
voltage is too high failure .CA221, environmental pressure sensor feedback voltage high failure .CA222,
environmental pressure sensor feedback voltage is too low failure .CA227, sensor supply 2 voltage is too
high failure .CA234, engine overspeed .CA238, speed sensor supply voltage failure .CA271, IMV / PCV1
shorted .CA272, IMV / PCV1 circuit .CA322, nozzle 1 circuit, short circuit fault .CA323, nozzle 5 circuit,
short circuit fault .CA324, nozzle 3 open circuit, short circuit fault .CA325, nozzle 6 open circuit, short
circuit fault .CA331, nozzle 2 open circuit, short circuit fault .CA332, nozzle 4 open circuit, short circuit
fault .CA342, correction code is incorrect .CA351, jet drive circuit fault .CA352, sensor supply voltage is
too low failure .CA386, sensor supply voltage is too high failure .CA428, fuel moisture sensor feedback
voltage is too high failure. CA429, fuel moisture sensor feedback voltage is too low failure .CA435, engine
oil pressure switch failure .CA441, the battery voltage is too low failure .CA442, the battery voltage is too
high failure .CA449, common rail high pressure fault .CA451, rail pressure sensor feedback value is too
high failure .CA452, rail pressure sensor feedback value is too low failure .CA488, intake air temperature
is too high (torque reduction). CA553, common rail high pressure failure. CA559, common rail pressure is
too low failure. CA689, engine speed sensor fault. CA731, spare engine speed sensor signal phase fault.
CA757, all data is lost. CA778, spare engine speed sensor fault. CA633, data transport suspend failure.
CA2185, throttle plate supply voltage is too high failure. CA2186, throttle plate supply voltage is too low
failure. CA2249, common rail pressure is too low failure. CA2311, IMV solenoid valve failure. CA2555,
intake air preheating voltage is too high failure. CA2556, preheat intake low voltage fault. D19JKZ,
personalized transcoding exception. D862KA, GPS antenna circuit. DA22KK, pump solenoid valve power
supply voltage is too low failure. DA25KP, 5V sensor supply is abnormal. DA29KQ, mode selection error.
DA2RMC, CAN circuit (monitor). DGH2KB, hydraulic oil temperature sensor short circuit. DHPAMA,
before the pump pressure sensor is abnormal. DHPBMA, the pump pressure sensor is abnormal.
DHS3MA, PPC stick back pressure sensor is abnormal. DHS4MA, bucket involved in PPC pressure sensor
anomaly. DHS8MA, Boom PPC pressure sensor anomaly. DHSAMA, turning right PPC pressure sensor
anomaly. DHSBMA, turning left PPC pressure sensor anomaly. DHSDMA, bucket open PPC pressure
sensor anomaly. DHX1MA, load sensor is abnormal. DW43KA, walking high and low conversion solenoid
valve circuit. DW43KB, walking high and low conversion solenoid shorted. DW45KA, rotary solenoid
valves keep breaking. DW45KB, rotary holding solenoid valve is shorted. DW91KA, two overflow
solenoid valve circuit. DW91KB, walking bus solenoid shorted. DWA2KA, spare solenoid valve circuit.
DWA2KB, spare solenoid shorted. DWK0KA, two overflow solenoid valve circuit. DWK0KB, two overflow
solenoid shorted. DXA8KA, before the pump PC-EPC solenoid valve circuit. DXA8KB, before the pump PC-
EPC solenoid shorted. DXA9KA, after the pump PC-EPC solenoid valve circuit. DXA9KB, after the pump
PC-EPC solenoid shorted. DXE0KA, LS-EPC solenoid valve circuit. DXE0KB, LS-EPC solenoid shorted.
DXE4KA, emergency EPC circuit breaker. DXE4KB, emergency EPC circuit. DXE5KA, pumps merging /
diverging main solenoid valve circuit. DXE5KB, pump confluence / diverging main solenoid valve is
shorted. DXE6KA, pump confluence / LS solenoid valve shunt circuit. DXE6KB, pump confluence / shunt
LS solenoid shorted. DY20KA wiper not working. , DY20MA, wiper parked exception. DY2CKA, spray
motor circuit. DY2CKB, spray motor shorted.
PC200-8 take EFI engine, the user code are quite different and PC200-6 / 7. PC200-8 user code:
E10, engine controller power failure, the engine control system loop drive failure (this engine is stopped.
E11, mobilization machine control system failure (reduce output power, in order to maintain the engine).
CA122, intake air pressure sensor feedback voltage is too high failure.
CA123, intake air pressure sensor feedback voltage is too low failure.
CA153, intake air temperature sensor feedback voltage is too high failure.
CA154, intake air temperature sensor feedback voltage is too low failure.
CA221, the feedback voltage is too high ambient pressure sensor failure.
DA22KK, pump solenoid valve power supply voltage is too low failure.
Komatsu excavator PC200-6 / PC300-6 / PC400-6 / PC200-7 fault code, user code (displayed automatically
when there is a fault) Code:
E01, HYPER system in automatic mode systems.
E02, PC-EPC system.
E03, Swing parking brake system.
E04 + CALL, HYPER system joystick-bit systems.
E05, governor motor system.
E06 + CALL, HYPER system EPC solenoid valve drive system.
E09, HYPER-GX system shutdown.
CALL, HYPER joystick and EPC solenoid valve drive system.
Service code (the need for switching operation) Code:
E101, fault history exception.
E102, clock data anomalies.
E103, buzzer output short circuit, buzzer driving harness contact with the 24V power cable.
E104, air filter clogging.
E108, the water temperature above 105 ℃.
E112, wiper motor drive forward system shorted (new).
E113, reversing wiper motor drive system short-circuit (new).
E114, spray drive circuit shorted (new).
E202, LS select solenoid valve circuit.
E203, Swing parking brake solenoid valve circuit.
E204, pump confluence / bypass solenoid valve circuit.
E205, two overflow solenoid circuit.
E206, walking speed converter solenoid circuit.
E207, fast mode solenoid valve circuit.
E208, fast mode solenoid circuit breaker.
E213, Swing parking brake solenoid valve circuit breaker.
E214, pump confluence / diverter solenoid circuit breaker.
E215, two overflow solenoid circuit breaker.
E216, walking speed converter solenoid circuit.
E207, fast mode solenoid valve circuit.
E208, fast mode solenoid circuit breaker.
E213, Swing parking brake solenoid valve circuit breaker.
E214, pump confluence / diverter solenoid circuit breaker.
E215, two overflow solenoid circuit breaker.
E216, walking speed converter solenoid circuit breaker.
E217, mode selection input fault.
E218, the network in response to a timeout failure.
E222, LS-EPC solenoid circuit.
E223, LS-EPC solenoid circuit breaker.
E224, before the pump pressure sensor circuit is abnormal.
E225, the pump pressure sensor circuit is abnormal.
E226, pressure sensor circuit power anomalies.
E227, the engine speed sensor is abnormal.
E231, activation (rotary) solenoid circuit.
E232, before the pump TVC solenoid circuit shorted (old).
E233, before the pump TVC solenoid circuit breaker (old).
E225, the pump pressure sensor circuit is abnormal.
E226, pressure sensor circuit power anomalies.
E227, the engine speed sensor is abnormal.
E231, activation (rotary) solenoid circuit.
E232, before the pump TVC solenoid circuit shorted (old).
E233, before the pump TVC solenoid circuit breaker (old).
E235, activation (rotary) solenoid circuit breaker.
E236, the pump TVC solenoid circuit.
E237, the pump TVC solenoid circuit breaker.
E302, rotary stroke control solenoid circuit.
E303, rotary stroke control solenoid circuit breaker.
E306, feedback potentiometer circuit abnormalities.
E308, fuel dial input anomalies.
E313, Automatic for the fat controller failure (optional).
E315, the battery relay output circuit.
E316, governor motor disorders.
E317, governor motor circuit breaker.
E318, governor motor circuit.
Komatsu excavator -8 fault code sets:
PC200-8 using EFI engine, the user code and PC200-6 / 7 there is a big difference.
PC200-8 user code:
E02, PC-EPC system.
E03, Swing parking brake system.
E10, engine controller power failure, the engine control drive system circuit fault (this engine is stopped.
E11, engine control system failure (reduction of output power, to protect the engine).
E14, feedback system abnormalities.
E15, engine sensors (temperature, fuel pressure, oil pressure) fault.
EOE, network failure.
Fault code:
989L00, engine controller lock warning (mode 1).
989M00, warning the engine controller lock (mode 2).
989N00, engine controller lock warning (mode 3).
AA10NX, air filter clogging.
AB00KE, the charging voltage is too low.
B @ BAZG, engine oil pressure is too low.
B @ BAZK, the oil level is too low.
B @ BCNS, engine coolant overheating.
B @ BCZK, the coolant level is too low.
B @ HANS, hydraulic oil overheating.
CA111, engine controller internal fault.
CA115, engine speed sensor and backup speed sensor failure.
CA122, intake air pressure sensor feedback voltage is too high failure.
CA123, intake air pressure sensor feedback voltage is too low failure.
CA131, throttle plate sensor feedback voltage high failure.
CA132, throttle plate sensor feedback voltage low failure.
CA144, coolant temperature sensor feedback voltage is too high failure.
CA145, coolant temperature sensor feedback voltage is too low failure.
CA153, intake air temperature sensor feedback voltage is too high failure.
CA154, intake air temperature sensor feedback voltage is too low failure.
CA155, intake air temperature is too high (over limit).
CA187, sensor supply two high voltage fault.
CA221, the feedback voltage is too high ambient pressure sensor failure.
CA222, environmental pressure sensor feedback voltage is too low failure.
CA227, sensor supply two high voltage fault.
CA234, engine overspeed.
CA238, speed sensor supply voltage failure.
CA271, IMV / PCV1 short circuit.
CA272, IMV / PCV1 circuit.
CA322, nozzle 1 circuit, short-circuit faults.
CA323, nozzle 5 open circuit, short circuit faults.
CA324, nozzle 3 open circuit, short circuit faults.
CA325, nozzle 6 circuit, short-circuit faults.
CA331, nozzle 2 open circuit, short circuit faults.
CA332, nozzle 4 circuit, short-circuit faults.
CA342, the correction code is incorrect.
CA351, jet drive circuit failure.
CA352, sensor supply voltage is too low failure.
CA386, sensor supply voltage is too high failure.
CA428, fuel moisture sensor feedback voltage is too high failure.
CA429, fuel moisture sensor feedback voltage is too low failure.
CA435, engine oil pressure switch failure.
CA441, the battery voltage is too low failure.
CA442, the battery voltage is too high failure.
CA449, common rail high pressure failure.
CA451, rail pressure sensor feedback value is too high failure.
CA452, rail pressure sensor feedback value is too low failure.
CA488, intake air temperature is too high (torque reduction).
CA553, common rail high pressure failure.
CA559, common rail pressure is too low failure.
CA689, engine speed sensor fault.
CA731, spare engine speed sensor signal phase fault.
CA757, all data is lost.
CA778, spare engine speed sensor fault.
CA633, data transport suspend failure.
CA2185, throttle plate supply voltage is too high failure.
CA2186, throttle plate supply voltage is too low failure.
CA2249, common rail pressure is too low failure.
CA2311, IMV solenoid valve failure.
CA2555, intake air preheating voltage is too high failure.
CA2556, preheat intake low voltage fault.
D19JKZ, personalized transcoding exception.
D862KA, GPS antenna circuit.
DA22KK, pump solenoid valve power supply voltage is too low failure.
DA25KP, 5V sensor supply is abnormal.
DA29KQ, mode selection error.
DA2RMC, CAN circuit (monitor).
DGH2KB, hydraulic oil temperature sensor short circuit.
DHPAMA, before the pump pressure sensor is abnormal.
DHPBMA, the pump pressure sensor is abnormal.
DHS3MA, PPC stick back pressure sensor is abnormal.
DHS4MA, bucket involved in PPC pressure sensor anomaly.
DHS8MA, Boom PPC pressure sensor anomaly.
DHSAMA, turning right PPC pressure sensor anomaly.
DHSBMA, turning left PPC pressure sensor anomaly.
DHSDMA, bucket open PPC pressure sensor anomaly.
DHX1MA, load sensor is abnormal.
DW43KA, walking high and low conversion solenoid valve circuit.
DW43KB, walking high and low conversion solenoid shorted.
DW45KA, rotary solenoid valves keep breaking.
DW45KB, rotary holding solenoid valve is shorted.
DW91KA, two overflow solenoid valve circuit.
DW91KB, walking bus solenoid shorted.
DWA2KA, spare solenoid valve circuit.
DWA2KB, spare solenoid shorted.
DWK0KA, two overflow solenoid valve circuit.
DWK0KB, two overflow solenoid shorted.
DXA8KA, before the pump PC-EPC solenoid valve circuit.
DXA8KB, before the pump PC-EPC solenoid shorted.
DXA9KA, after the pump PC-EPC solenoid valve circuit.
DXA9KB, after the pump PC-EPC solenoid shorted.
DXE0KA, LS-EPC solenoid valve circuit.
DXE0KB, LS-EPC solenoid shorted.
DXE4KA, emergency EPC circuit breaker.
DXE4KB, emergency EPC circuit.
DXE5KA, pumps merging / diverging main solenoid valve circuit.
DXE5KB, pump confluence / diverging main solenoid valve is shorted.
DXE6KA, pump confluence / LS solenoid valve shunt circuit.
DXE6KB, pump confluence / shunt LS solenoid shorted.
DY20KA wiper not working. ,
DY20MA, wiper parked exception.
DY2CKA, spray motor circuit.
DY2CKB, spray motor shorted.
Komatsu excavator fault code E01, E02, E03, E04, E05, E06, E09,
Komatsu excavator fault codes E101, E102, E103, E104, E108,
Komatsu excavator fault codes E112, E113, E114,
Komatsu excavator fault codes E202, E203, E204, E205, E206, E207, E208,
Komatsu excavator fault codes E213, E214, E215, E216, E217, E218,
Komatsu excavator fault codes E222, E223, E224, E225, E226, E227,
Komatsu excavator fault codes E231, E232, E233, E235, E236, E237,
Komatsu excavator fault codes E302, E303, E306, E308,
Komatsu excavator fault codes E313, E315, E316, E317, E318.
Komatsu PC200-6 fault code, user code (displayed automatically when there is a fault) Code:
E01, HYPER system in automatic mode systems.
E02, PC-EPC system.
E03, Swing parking brake system.
E04 + CALL, HYPER system joystick-bit systems.
E05, governor motor system.
E06 + CALL, HYPER system EPC solenoid valve drive system.
E09, HYPER-GX system shutdown. CALL, HYPER joystick and EPC solenoid valve drive system.
Posted in How to
Sagheer says:
27/08/2017 at 5:18 pm