Академический Документы
Профессиональный Документы
Культура Документы
Search...
A. Queue limits host 192.168.1.10 upload data rate to one megabit per second.
B. Queue guarantees download data rate of one megabit per second for host 192.168.1.10
C. Queue limits host 192.168.1.10 download data rate to one megabit per second.
D. Queue guarantees upload data rate of one megabit per second for host 192.168.1.10
2. It is possible to have PPTP Client and PPTP server on one MikroTik router at the same time.
4. How many different priorities can be selected for queues in MikroTik RouterOS?
A. 0
B. 16
C. 8
D. 1
5. There are two wireless cards (wlan1 and wlan2) which are bridged together. On wlan1 card there is a setting "Forwarding=no". Choose the
correct answer(s):
D. To prevent communication between wlan1 and wlan2 one cannot use Bridge Filters
6. What letters appear next to a route, which is automatically created by RouterOS when user adds a valid address to an active interface?
A. A
B. I
C. D
D. C
E. S
A. neighbors
B. bandwidth-test
C. LCD support
1 of 4 20/10/16 17:51
MikroTik Routers and Wireless https://www.mikrotik.com/client/training&traini...
D. netwatch
E. ping
F. ip-scan
8. You can control bandwidth of a client connected to AP with the resource / interface wireless access-list ( assume the client uses MikroTik
RouterOS).
00:59:54
9. Action=redirect is applied in Save progress
A. chain=forward
B. chain=srcnat
C. chain=dstnat
10. Simple Queue number 0 defines 2M for upload and download for target IP 10.10.0.33.
Simple Queue number 1 defines 4M for upload and download for target IP 10.10.0.33. Client 10.10.0.33 is be able to obtain
A. 0M upload/download
B. 4M upload/download
C. 2M upload/download
D. 6M upload/download
11. For static routing functionality, additionally to the RouterOS 'system' package, you will also need the following software package:
A. routing
B. dhcp
D. advanced-tools
A. wireless users
B. pptp users
C. hotspot users
D. router users
14. To set up masquerading of the network 192.168.0.0/24, configured on the interface ether1, you should add rule
15. When adding a static route, you must always ensure that you add both the gateway and the interface.
2 of 4 20/10/16 17:51
MikroTik Routers and Wireless https://www.mikrotik.com/client/training&traini...
B. TCP 1721
C. UDP 1723
D. UDP 1721
18. To block communications between wireless clients connected to the same access point interface, you should set
A. 'default-forwarding=no'
B. 'default-authentication=no'
D. 'max-station-count=1'
19. There can be more than one PPPoE server in a single broadcast domain:
20. You want to transfer existing '/ip firewall filter' configuration from one router to a new system. Choose the best possible way to do:
D. Export global configuration and remove everything apart from '/ip firewall filter'
21. What is the correct action for a NAT rule on a router that should intercept SMTP traffic and send it over to a specified mail server?
A. dst-nat
B. redirect
C. tarpit
D. passthrough
22. How many wireless clients can connect, when wireless card is configured to mode=bridge ?
A. 2
B. 1
C. 100
D. 2007
A. A = Active
B. D = Drop
C. C = Connected
D. S = Static
24. How many DHCP servers can be configured per interface on RouterOS?
A. Two
B. Unlimited
3 of 4 20/10/16 17:51
MikroTik Routers and Wireless https://www.mikrotik.com/client/training&traini...
C. One
D. Five
25. Router A and B are both running as PPPoE servers on different broadcast domains of your network. It is possible to set Router A to use "/ppp
secret" accounts from Router B to authenticate PPPoE customers.
00:59:54
Finish
Save progress
4 of 4 20/10/16 17:51