Вы находитесь на странице: 1из 3

WORKSHEET-­‐106a

 –  Ordering  Wire  Rope  Slings,  Revision  1  –  4/28/14

ORDERING  WIRE  ROPE  SLINGS


TO  ORDER  SLING,  CREATE  SPECIFICATION  BY  CREATING  THE
FOLLOWING  SYSTEM: Indicates  that  sling Sling  Length  in  Ft.
length  follows (one  or  two  digits)  Refer
Define  rope  diameter to  drawings  on  back  for
(one  to  three  digits)  112      637      D      EE    X    12 measuring  sling  length
1  ½”  shown  in  example

619  refers  to  IWRC,  EIP Domes^c  =  D Show  termina^on  or


construc^on, Import  =  I other  styles  (see
637  for  6x37  construc^on, below)
719  for  7x19  Galvanized Eye  &  Eye  =EE
Bridles  –  2  leg  =  2LB
Notes:                                  3  leg  =  3LB
1.  Proof  tes^ng  with  cer^fica^on  available  for  all  slings  at  an                                  4  leg  =  4LB
addi^onal  charge Endless  =  EN
2.  Larger  eyes  are  available  at  addi^onal  charge Braids      -­‐  3  part  =  3PEE
3.  Length  Tolerance  is  plus  or  minus  two  sling  diameters  or  .5%  of
sling  length  (whichever  is  greater)
                                 6  part  =  6PEE
4.  The  legs  of  bridle  slings  are  matched  and  held  to  within  (1)  rope                                  7  part  =  7PEE
diameter.                                  8  part  =  8PEE

OTHER  WIRE  ROPE  CONFIGURATIONS


Std.  Eye Sliding Choker
Eye  &  Hook  (with  thimble)  =  E/TH Eye & Thimble
Thimble  and  Thimble  =  T/T E/T/SCH
Hook
Thimble  and  Hook  =  T/TH
Eye  and  Crescent  Thimble  =  E/CT Sliding Choker
Eye  and  Slip  Thru  Thimble  =  E/ST Std.  Thimble Eye & Eye
Thimble  and  Slip  Thru  Thimble  =  T/ST E/E/SCH
Crescent  Thimble  and  Hook  =  CT/TH Crescent  Thimble
Crescent  Thimble  and  Crescent  Thimble  =  CT/CT
Slip  Thru  Thimble  and  Hook  =  ST/TH
Slip  Thru  Thimble  &  Slip  Thru  Thimble  =  ST/ST Slip  Thru    Thimble

The  informa^on  contained  in  this  document  was  obtained  from  resources  believed  to  be  reliable  at  the  ^me  of  publica^on.  You  assume  the  en^re
risk  as  to  the  use  of  this  informa^on  and    Industrial  Splicing  and  Sling  assumes  no  liability  in  connec^on  with  the  informa^on  presented    or  the  use  of
sugges^ons  in  this  publica^on.  Refer  to  the  full  OSHA  and  ASME  Standards  addressing  the  topics  discussed.

Copyright © 2014 Industrial Splicing and Sling


All Rights Reserved Page    1  of  3

Slip  Thru  Thimble


WORKSHEET-­‐106a  –  Ordering  Wire  Rope  Slings,  Revision  1  –  4/28/14

WIRE  ROPE  SLING  CAPACITIES

*  Rated  capacity  in  tons  of  2,000  lbs.

SAMPLE  WIRE  ROPE  SLING  SPECIFICATIONS


1  637  D  EE  X  20:
Is  a  1”    wire  rope,  6x37  construc^on  with  eye  and  eye,  20  i.  long,  “Pull  to  Pull”

20  Ft.  “Pull  to  Pull”


34  619  D  E/TH  X    12:
Is  a  3/4”    wire  rope,  6x19  construc^on  with  eye,  thimble  and  hook,  12  i.  long,  “Pull  to  Pull”

12  Ft.  “Pull  to  Pull”

The  informa^on  contained  in  this  document  was  obtained  from  resources  believed  to  be  reliable  at  the  ^me  of  publica^on.  You  assume  the  en^re
risk  as  to  the  use  of  this  informa^on  and    Industrial  Splicing  and  Sling  assumes  no  liability  in  connec^on  with  the  informa^on  presented    or  the  use  of
sugges^ons  in  this  publica^on.  Refer  to  the  full  OSHA  and  ASME  Standards  addressing  the  topics  discussed.

Copyright © 2014 Industrial Splicing and Sling


All Rights Reserved Page    2  of  3
WORKSHEET-­‐106a  –  Ordering  Wire  Rope  Slings,  Revision  1  –  4/28/14

WIRE  ROPE  SLING  BRIDLE  CAPACITIES

*  Rated  capacity  in  tons  of  2,000  lbs.

The  informa^on  contained  in  this  document  was  obtained  from  resources  believed  to  be  reliable  at  the  ^me  of  publica^on.  You  assume  the  en^re
risk  as  to  the  use  of  this  informa^on  and    Industrial  Splicing  and  Sling  assumes  no  liability  in  connec^on  with  the  informa^on  presented    or  the  use  of
sugges^ons  in  this  publica^on.  Refer  to  the  full  OSHA  and  ASME  Standards  addressing  the  topics  discussed.

Copyright © 2014 Industrial Splicing and Sling


All Rights Reserved Page    3  of  3

Вам также может понравиться