Академический Документы
Профессиональный Документы
Культура Документы
Exam Code:300-170
Version:Demo
QUESTION 1
Refer to the exhibit. Which modules are shut down by the EEM power over-budget policy event?
A. The module that causes the power over-budget event shuts down.
B. All modules that have power over the budget shut down.
C. The modules starting from module 1 shut down when the available power drops below zero.
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-
os/system_management/configuration/guide/sm_nx_os_cg/sm_eem_events_and_examples.pdf
QUESTION 2
A. 3 minutes
B. 15 minutes
C. 5 minutes
D. 10 minutes
Correct Answer: A
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-
Fundamentals/b_ACI-Fundamentals_chapter_010010.html
QUESTION 3
You deploy a Cisco Nexus 1000V Series Switch that has VXLAN support. You must ensure that baremetal servers and
virtual servers can communicate. Which technology must you implement?
B. A-FEX
C. SGT
D. VM-FEX
Correct Answer: A
Reference: http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-
switches/guide_c07-728864.html
QUESTION 4
A system administrator checks the endpoint database and discovers MAC addresses that belong to inactive local
nodes. Which description of the retention of the MAC addresses for the local nodes is true?
A. After five minutes of inactivity, the hosts are removed from the local endpoint database of the leaf.
C. The leaf sends three ARP requests after an aging period. If the switch receives no response, the hosts are removed
from the local endpoint database of the leaf.
D. After 30 minutes of inactivity, the hosts are removed from the local endpoint database of the leaf.
Correct Answer: A
QUESTION 5
What occurs when the Cisco ACI fabric receives multidestination traffic?
Correct Answer: B
QUESTION 6
You discover that a VLAN is not enabled on a leaf port even though an EPG is provisioned. Which cause of the issue is
most likely true?
Correct Answer: B
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/virtualization/b_ACI_Virtualization
_Guide_2_0_1x/b_ACI_Virtualization_Guide_2_0_1x_chapter_010.html#concept_C3EF1E36E8F6406A96A71E605AC1
75BD
QUESTION 7
Which two benefits come from using a Cisco Nexus 7000 Series Switch in VDC mode? (Choose two.)
B. per-VDC administration
Correct Answer: BE
Reference: http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-10-slot-
switch/White_Paper_Tech_Overview_Virtual_Device_Contexts.html
QUESTION 8
Which two statements about the configuration synchronization feature on Cisco Nexus switches are true? (Choose
two.)
A. Config-sync mode allows you to create a switch profile that can be used to configure a peer switch so that both peers
have the same configuration.
B. Configuration synchronization can be used to synchronize all parts of the vPC configuration.
C. Configuration synchronization uses the Cisco Fabric Services over IPv6 protocol.
Correct Answer: AE
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/operations/n5k_config_sync_ops.
html#pgfId-999073
QUESTION 9
Which protocol is used as the link-state routing protocol for a DFA fabric?
A. VXLAN
B. EIGRP
C. FaricPath IS-IS
D. OSPF
Correct Answer: C
Reference: https://www.google.co.in/url?sa=tandrct=jandq=andesrc=sandsource=webandcd=3andcad=rjaanduact=8an
dved=0ahUKEwiP3KThqKHVAhWBf7wKHbm0DiIQFgg1MAIandurl=http%3A%2F%2Fwww.cisco.com%2Fc%2Fen%2F
us%2Ftd%2Fdocs%2Fswitches% 2Fdatacenter%2Fdfa%2Fconfiguration%2Fb-dfa-configuration%2Ffabric-control-
segment.htmlandusg=AFQjCNGtxPIX57Q_wvs_7a1drTW_WDgf_g
QUESTION 10
Which action does a VEM on a Cisco Nexus 1000V Series Switch take when an untagged packet is received on an
access port?
Correct Answer: A
QUESTION 11
Refer to the exhibit. Which action do you take to ensure that both endpoints are within the same subnet?
Correct Answer: D
QUESTION 12
Which two objects must have multicast routing configured when implementing Cisco ACI? (Choose two.)
A. Layer 3 Out
B. SVI
C. bridge domain
D. leaf
E. Layer 3 in
Correct Answer: AC
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/L3_config/b_Cisco_APIC_Layer_
3_Configuration_Guide/b_Cisco_APIC_Layer_3_Configuration_Guide_chapter_01111.html
QUESTION 13
A. an L3Out
D. a CTX1 tenant
Correct Answer: A
QUESTION 14
Which feature of a Cisco Nexus 1000V Series Switch allows you to deploy traffic steering for a virtual infrastructure?
A. SGT
B. PVLAN
C. ACL
D. vPath
Correct Answer: D
Reference: https://webcache.googleusercontent.com/search?q=cache:aHnlUDizUw4J:https://www.cisco.com/c/dam/en/
us/solutions/collateral/switches/nexus-1000v-switch-vmware-vsphere/at_a_glance_c45-492852.pdf
+andcd=2andhl=enandct=clnkandgl=inandclient=firefox-b-ab
QUESTION 15
Which Cisco APIC health score will be affected if an EPG does not have a Bridge Domain associated with it?
A. spine health
B. leaf health
C. tenant health
D. pod health
Correct Answer: C
Reference: http://webcache.googleusercontent.com/search?q=cache:tyLTBhXrq3AJ:www.cisco.com/c/en/us/td/docs/swi
tches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_0101
0.pdf +andcd=1andhl=enandct=clnkandgl=inandclient=firefox-b-ab
QUESTION 16
You have a network that has three subnets. You migrate the network to a Cisco ACI fabric. You want to bridge the three
subnets without changing the IP addresses of the endpoints. The default gateway for the endpoints does not sit on the
ACI fabric. Which action must you take to keep the three subnets in a single flood domain?
A. Create multiple bridge domains that have unicast routing disabled within the same EPG. Connect the existing
subnets to the bridge domains.
B. Create one bridge domain that has unicast routing disabled and connect the existing subnets to the bridge domain.
C. Create one bridge domain that has unicast routing enabled and create corresponding subnets inside the bridge
domain. Connect the existing network to the bridge domain.
D. Create multiple bridge domains that have unicast routing enabled within the same EPG. Create corresponding
subnets inside the bridge domains and connect the existing network to the bridge domains.
Correct Answer: B
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/migration_guides/migrating_existing_
networks_to_aci.html
QUESTION 17
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/b_Cisco_O
perating_ACI/b_Cisco_Operating_ACI_chapter_0111.html
QUESTION 18
Which statement is correct about the number of available QoS system classes in FCoE?
Correct Answer: C
QUESTION 19
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_4/high_availability/
configuration/guide/n1000v_ha_cfg/n1000v_ha_3system.html
QUESTION 20
Which protocol is used to communicate endpoint mapping information to the spine proxy?
A. LLDP
B. COOP
C. OpFlex
D. IS-IS
Correct Answer: B
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/b_Cisco_O
perating_ACI/b_Cisco_Operating_ACI_appendix_011.html
QUESTION 21
A. It reports the current managed object in the bottom left hand corner of the GUI window.
B. It is a tool within UCS Director that allows the user to view the end point database.
C. It is an object store browser that exists on the APIC which can directly query the managed objects.
D. It is a tool used to report API calls that are made by the GUI to the APIC.
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/application-policy-infrastructure-
controller-apic/118839-technote-visore-00.html
QUESTION 22
Drag and drop each Cisco ACI policy model component on the left to the correct description on the right.
Correct Answer:
QUESTION 23
You perform the configuration as shown in the exhibit. Which two additional tasks must you perform to deploy EPG on
PC, VPC, or Interface? (Choose two.)
E. Extend the VLAN represented by EPG out of the Cisco ACI fabric.
Correct Answer: AB
QUESTION 24
Which option must be defined to apply a configuration across a potentially large number of switches in the most scalable
way?
A. a configuration policy
B. a group policy
C. an interface policy
D. a switch profile
Correct Answer: D
QUESTION 25
Refer to the exhibit. Which statement accurately describes the configuration of Cisco2?
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_0_4_s_v_1_3/port_profile/confi
guration/guide/n1000v_port_profile/n1000v_portprof_3inherit.html
QUESTION 26
A. debug logs
C. function profiles
D. device scripts
Correct Answer: A
Reference: https://webcache.googleusercontent.com/search?q=cache:sbj6aGf31j0J:https://www.cisco.com/c/en/us/td/d
ocs/switches/datacenter/aci/apic/sw/1-x/L4-L7_Services_Deployment/guide/b_L4L7_Deploy_ver211/
b_L4L7_Deploy_ver211_chapter_011.pdf+andcd=1andhl=enandct=clnkandgl=inandclient=firefox-b-ab
QUESTION 27
You are performing VMM integration between ACI and VMware with vDS. You place a Cisco UCS Fabric Interconnect
between the leaf and the ESXi hosts running on UCS-B series. Which is a valid configuration if using VMM integration
with "On Demand" resolution?
A. In the interface policy group, disable LLDP, enable Cisco Discovery Protocol, and then select MAC pinning on the
Fabric Interconnects.
B. In the interface policy, enable LLDP, Cisco Discovery Protocol, and LACP.
C. In the interface policy group, disable LLDP, disable Cisco Discovery Protocol, and then select active in the LACP
policy
D. Configure LLDP, Cisco Discovery Protocol, and LACP policies under global policies to match the interface policies.
Correct Answer: A
QUESTION 28
You are attempting to install a switch remotely. You have a POAP script that fails to find a specified boot image on the
switch. Which action do you take?
QUESTION 29
During EPG to EPG monitoring, how often are atomic packet counters on a configured policy updated?
A. every 5 seconds
B. every 10 seconds
C. every 30 seconds
D. every 60 seconds
Correct Answer: C
Reference: https://aci-troubleshooting-book.readthedocs.io/en/latest/tools.html
QUESTION 30
Which action occurs first when a device that has the POAP feature boots and cannot find the startup configuration?
Correct Answer: B
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/fundamentals/configuration/gui
de/b_Cisco_Nexus_9000_Series_NX-OS_Fundamentals_Configuration_Guide/b_Cisco_Nexus_9000_Series_NXOS_F
undamentals_Configuration_Guide_chapter_011.html
To Read the Whole Q&As, please purchase the Complete Version from Our website.
Need Help
Please provide as much detail as possible so we can best assist you.
To update a previously submitted ticket:
Any charges made through this site will appear as Global Simulators Limited.
All trademarks are the property of their respective owners.