Академический Документы
Профессиональный Документы
Культура Документы
User’s Manual
M
-
T
e
c
h
1. LCD Display mode
<PA1100-A>
PAN-ASIA[M-Tech]
Right Key
H-1234 Lock CH2
Tank Name : 1WBT(S)
Height (M) : 12.345
S_ Gravity : 1.025
Right Key
H-1234 Lock CH3
Tank Name : 2WBT(P)
Height (M) : 12.345
S_ Gravity : 1.025
Left Key
H-1234 Lock CH2
Tank Name : 1WBT(S)
Height (M) : 12.345
S_ Gravity : 1.025
1. LCD Display mode
1.4 All display mode
Pushing MODE button one more time in Locking mode changes
to All display mode, and displays the entire channel.
1;+12.345__2;+ 2.345
3;+23.234__4;+34.532
5;+11.344__6;+11.342
7;+16.443__8;+14.222
<Setting Mode>
Password:0000
Cursor starts at ”0,” and with a push of UP button, its value changes
in between 0~9.
With RIGHT button, cursor moves to the next location. Pushing SET
Button after setting the values of four digits, it enters into Setting
mode.
<Setting Mode>
Password: FAIL
Pushing RIGHT button moves cursor to the right, and LEFT button
to the left. Pushing UP button changes cursor at its location to a
value between 0~9.
Input set value using RIGHT,LEFT button and UP button.
Pushing MODE button moves to the next channel setting screen.
Mode Key
CH3 Setting AD:00000
Zero :+00.000 00000
Span :+00.000 00000
OS : +00.000 SG; 1.000
Mode Key
CH4 Setting AD:00000
Zero :+00.000 00000
Span :+00.000 00000
OS : +00.000 SG; 1.000
Mode Key
< ID Setting >
Mode Key
Enter SET key !
To exit setting !
2.System Setting Mode
For Zero value, use 4mA at an applicable channel, and for Span,
use 20mA and input the indicating AD value.
SET button stores the set data as shown in the figure below.
CH1 Saved !!
Without pushing SET button, the set data is not stored and
maintains the existing value.
2.System Setting Mode