Академический Документы
Профессиональный Документы
Культура Документы
Exercise 1: Open Packet Tracer (start ‐> cisco packet tracer) and click on help ‐> Contents.
Go to: Getting
Started �Interface Overview.
Answer :
Step 1
Answer :
Answer :
IP PC0 = 192.168.1.2/24
Gateway = 192.168.1.1
IP PC1 = 192.168.1.3/24
Gateway = 192.168.1.1
IP PC2 = 192.168.1.4/24
Gateway = 192.168.1.1
IP PC3 = 192.168.1.5/24
Gateway = 192.168.1.1
Step 3: Test the network, e.g., ping PC3 from PC0.
Answer :
Scenario: You have recently graduated from College and decide to start up your own small
business. At your office, you
have two PCʹs an old hub and a printer. You decide to network the PCs and Printer.
In the Topology screen build your simple network:
• Connect each PC and the printer to your hub
You need to configure each PC and the printer with an IP address as given below. You do not
need give a gateway address. WHY?
Answer :
Karena :
PC hanya menggunakan switch yang hanya melewatkan langsung ke printer yang ip nya sudah di
setting jadi tidak memerlukan gateway address.
PC0: 192.168.1.100
o PC1: 192.168.1.101
o Printer: 192.168.1.50
Answer :
Karena fungsi HUB itu hanya melewatkan dan sebagai pembagi ke workstation/client
yang lain, bandwidthnya akan terbagi.
Answer :
Layer 1
HUB tidak menyaring atau menerjemahkan sesuatu, HUB hanya mengetahui kecepatan
transfer data dan susunan pin pada kabel.
HUB beroperasi pada layer 1 dengan cara mengirimkan sinyal paket data ke seluruh port
pada HUB sehingga paket data tersebut diterima oleh seluruh komputer yang
berhubungan dengan HUB tersebut.
c. How many layers do PCs process?
Answer :
7 Process
a. Layer 7 Application
b. Layer 6 Presentation
c. Layer 5 Session
d. Layer 4 Transport
e. Layer 3 Network
f. Layer 2 Data link
g. Layer 1 Physical
Exercise 4:
Repeat Exercise # 3 using a switch instead of a hub. Observe and explain at least 4 points
about the differences.
Answer :