Академический Документы
Профессиональный Документы
Культура Документы
1
EasyIO FG-20– Installation Guide v1.3
26thFeb 2013
Document created.
th
17 Dec 2018
Updated disclaimer and support channel emails addresses
2
EasyIO FG-20– Installation Guide v1.3
Disclaimer
Confidentiality Notice
The information contained in this document is confidential information of EasyIO Holdings Pte Ltd. Such
information and the software described herein, is furnished under a license agreement and may be used
only in accordance with that agreement.
The information contained in this document is provided solely for use by EasyIO Holdings Pte Ltd
employees, licensees, and system owners; and, except as permitted under the below copyright notice, is
not to be released to, or reproduced for, anyone else.
While every effort has been made to assure the accuracy of this document, EasyIO Holdings Pte Ltd is not
responsible for damages of any kind, including without limitation consequential damages, arising from
the application of the information contained herein. Information and specifications published here are
current as of the date of this publication and are subject to change without notice. The latest product
specifications can be found by contacting our corporate headquarters or support channel.
Trademark Notice
BACnet and ASHRAE are registered trademarks of American Society of Heating, Refrigerating and Air-
Conditioning Engineers. All other product names and services, mentioned in this publication, that are
known to be trademarks, registered trademarks, or service marks are the property of their respective
owners.
Disclaimer
The material in this manual is for information purposes only. The contents and the product it
describes are subject to change without notice. EasyIO Holdings Pte Ltd makes no
representations or warranties with respect to this manual. In no event shall EasyIO Holdings Pte Ltd be
liable for any damages, direct or incidental, arising out of or related to the use of this manual.
3
EasyIO FG-20– Installation Guide v1.3
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
4
EasyIO FG-20– Installation Guide v1.3
Table of Contents
Introduction ....................................................................................................................................................6
Dimension .......................................................................................................................................................6
Physical Installation Instructions ....................................................................................................................8
Opening the Top Cover .................................................................................................................................11
Micro SD Card Installation ............................................................................................................................12
EasyIO FG ..................................................................................................................................................12
EasyIO FG+ ................................................................................................................................................15
Technical Support .........................................................................................................................................17
5
EasyIO FG-20– Installation Guide v1.3
Introduction
This document provides the installation guide/mounting guide for the EasyIO FG20 controller.
- In an area where excessive moisture, corrosive fumes or explosion vapors are present.
- Where excessive vibration or shock is likely occur
- Location where excessive electrical noise such as large magnetic interference or variable speed
drive modules
Dimension
Below are the dimensions of the device.
6
EasyIO FG-20– Installation Guide v1.3
7
EasyIO FG32 – Installation Guide
Step 2
Use a screwdriver to unlock the 2 numbers of locking clips.
8
EasyIO FG32 – Installation Guide
Step 3
Position the EasyIO FG20 on the DIN rail mount till it hooks over the top edge of the DIN rail.
Push the controller towards the bottom part of the DIN rail
Step 4
Press/flatten the EasyIO FG20 to make sure the bottom of the base cover touches the enclosure base
plate.
Step 5
Use a screwdriver to lock the locking clips to secure the EasyIO FG20 to the DIN rail.
9
EasyIO FG32 – Installation Guide
Step 6
To keep the assembly secures a DIN rail end clip can be use.
The EasyIO FG20 comes with 2 mounting holes as optional mounting. Occasionally if DIN rail mounting is
not practical, you can use screws to mount the EasyIO FG20 to an enclosure base plate.
10
EasyIO FG32 – Installation Guide
Step 2
Hold both end of the top cover to lift up the top cover. Occasionally a small flat head screw driver might
come handy in case the top cover stuck to the bottom cover.
11
EasyIO FG32 – Installation Guide
Specifications Remark
Brand tested recommended Transend, Kingston
Capacity tested 2GB, 4GB, 8GB, 16GB
Class Class 4
Class 10
EasyIO FG
Step 1
Locate the micro SD card slot at the top right corner.
Step 2
Slide the metal cage towards the inside of the controller.
12
EasyIO FG32 – Installation Guide
Step 3
Carefully lift the metal cage up approximately 1200 towards the left.
Step 4
Insert/place the micro SD card. Make sure the micro SD card pins are in contact with the micro SD card
slot.
Optionally use some alcohol solution to clean the contact pins.
13
EasyIO FG32 – Installation Guide
Step 5
Close the metal cage by tilting it downwards towards the right.
Step 6
Press metal cage firmly down and slide it outside of the controller towards the right to secure the micro
SD card.
14
EasyIO FG32 – Installation Guide
EasyIO FG+
Step 1
Locate the micro SD card slot at the top right corner.
EasyIO FG+ comes with slide-in type of micro SD card holder.
Step 2
Slide the micro SD card with contact pins face down.
15
EasyIO FG32 – Installation Guide
Step 3
Carefully push the micro SD card in until it is lock.
A click sound indicates the micro SD card is locked in position.
Step 4
To remove the micro SD card , push the micro SD card in towards the holder until you hear a click sound.
The micro SD card will eject.
16
EasyIO FG32 – Installation Guide
Technical Support
17