Академический Документы
Профессиональный Документы
Культура Документы
INDEX
The Solution is... 04
Health and Safety 04 Kingspan Access Floors is the world’s largest supplier of
raised access flooring and the only access flooring
Our Product Ranges 05
company in the UK to offer an all-embracing 25 year Total
Total System 06 System Warranty.
Warranty
Our Manufacturing 07 We have a proud tradition of helping to add the finishing
Facilities touches to some of the most prestigious buildings in the
Technical Support 08 UK and throughout the world.
Kingspan Access Floors floor panels, high quality panels laminated with vinyl,
HPL, wood, stone or granite and systems offering
enhanced acoustic properties.
Product testing
Our systems are put through a series of rigorous
tests in our extensive in-house test facility – they
can be subjected to extremes of temperature,
TECHNICAL SUPPORT HELPLINE lateral loads, rolling loads and if necessary,
01482 713 137 loadings beyond those required by the standard
specifications.
Whether you are an architect, interior designer, Kingspan’s in house test facility is more technically
contractor or distributor, our technical support advanced than most external testing facilities. We
team will quickly provide you with all the have invested heavily during recent years to ensure
information you need. that our customers are able to use our in house
facility and witness testing for themselves.
‘Vehicles use Euro 5 diesel We are committed to reducing the impact of our
business, operations, products and services on
Recycling Net Zero Energy the availability of this
service please contact our
engines with reduced emissions & the environment. Through the design and Kingspan is the only access flooring As a Kingspan Group company, we have set
Technical Helpline.
our motor car fleet is replaced on manufacture of our products we can also help our manufacturer in the UK to operate a recycling ourselves the challenge of achieving net zero
customers to achieve the same objectives – for scheme to reduce the amount of waste for energy at our manufacturing site by 2020. As part
a regular basis’ example, our access flooring ranges can help landfill. of this commitment we have invested in new,
organisations gain LEED, BREEAM and Ska energy saving production equipment, have
environmental assessment standards. Less than 5% from our Hull manufacturing site installed 1,000 photovoltaic solar panels and also
now goes to landfill – general waste is entered into a green energy contract to purchase
FSC Third Party chain of custody compacted for recycling, production waste
chipboard and sawdust, cardboard, metal and
electricity from renewable sources.
1.5kN †
RMG
3kN †
DRF
4.5kN †
Technical Information
† † †
Load over 300x300mm sq 2.7kN 4.5kN N/A
Panel Composition
Unique
wrap around
construction
GOOD
ACOUSTIC
PERFORMANCE
MEETS
CLASS 0 Chipboard
TO BS476 core
FIRE RATING
• Performs to a safety factor of 3 x static load. Panel construction Galvanised steel encapsulated
particle board core
• Finished floor heights from 57mm to 1200mm are
Our Product Ranges available using standard pedestals. For heights outside of
this range alternative pedestals are available. Panel dimensions
• Structural performance based upon a full Kingspan RLG600 RMG600 DRF600
Our varied product range is designed to meet system i.e. panels & pedestals. Panel thickness (nominal) 31mm 31mm 32mm
the needs of a variety of buildings and uses, System weight (typical) 31kg/m2 36kg/m2 44kg/m2
each system is designed and manufactured to
Panel size 600mm square
the pre-eminent raised flooring specifications i.e.
PSA PF2 PS; BS EN 12825. 25
YEAR
TOTAL SYSTEM
WARRANTY
PSA
www.kingspanaccessfloors.co.uk raise your expectations
14 15
FDEB PSA
A loose lay access flooring system featuring a full depth
Product performance (based upon a full Kingspan system)
TL Series PSA
A slim, medium grade access flooring system featuring a
Product performance (based upon a full Kingspan system)
FDEB 30 FDEB 38 TLM 26
edge band, galvanised steel sheet laminates and a variety unique wrap around construction and screw corner locking. Point load 25x25mm sq 3kN †
Panel grade Medium Heavy *
of finishes.
Point load 25x25mm sq 3kN † 4.5kN † Load over 300x300mm sq 4.5kN †
• This loose lay floor system is tested in accordance with • This floor system is tested in accordance with PSA MOB
Construction Construction
PSA MOB PS/SPU specification. Panel deflection at PS/SPU specification. Panel deflection at centre edge
Category Loose lay centre edge must not exceed 2.4mm based on 24 hour must not exceed 2.4mm based on 24 hour testing. Category Screw down
Panel construction Galvanised steel sheet • Safety factor of 3 x static load. available using standard pedestals. For heights outside of Panel construction Galvanised steel encapsulated
top & bottom with edge banding particle board core
this range alternative pedestals are available.
• Finished floor heights from 60mm to 1200mm are
available using standard pedestals. For heights outside of • Structural performance based upon a full Kingspan
Panel dimensions this range alternative pedestals are available. system i.e. panels & pedestals. Panel dimensions
26mm
FDEB 30 FDEB 38
• Extra Heavy Grade to the requirements of PSA MOB PF2 Panel thickness (nominal)
Panel thickness (nominal) 31mm * 39mm * PS/SPU is available using FDEB 38 heavy grade with bolt System weight (typical) 32kg/m2
System weight (typical) 42kg/m2 52kg/m2 on structural stringers. Panel size 600mm square
Panel size 600mm square • Structural performance based upon a full Kingspan
*excluding finish system i.e. panels & pedestals.
PSA
www.kingspanaccessfloors.co.uk raise your expectations
16 17
RG BSENA loose lay access flooring system with a unique wrap
Product performance (based upon a full Kingspan system)
RG3 RG5 RG6
FDEB BSENA loose lay access flooring system featuring a full depth
Ultimate load In excess of 8kN In excess of 10kN In excess of 12kN Product performance (based upon a full Kingspan system)
around constructione, available in three panel types. edge band, galvanised steel sheet laminates and a variety FDEB 1 FDEB 4 FDEB 6
Working load with a
safety factor of 3
2.67kN 3.33kN 4kN of finishes.
Ultimate load In excess of 4kN In excess of 9kN In excess of 12kN
Working load with a
safety factor of 2 4kN 5kN 6kN Working load with a
safety factor of 3 1.33kN 3kN 4kN
Uniformly distributed load* 15kN/m2 20kN/m2 25kN/m2
Working load with a
2kN 4.5kN 6kN
Airborne sound insulation 38-44dB 38-44dB 38-44dB safety factor of 2
Impact sound insulation 67-69dB 67-69dB 67-69dB Uniformly distributed load* 7.5kN/m2 17kN/m2 25kN/m2
SAFE AND SAFE AND
* Does not form part of BSEN 12825. WIDE RANGE *Does not form part of BSEN 12825.
EASY EASY ACCESS
SOLID ACCESS OF COVERING
UNDERFOOT OPTIONS
GOOD SOLID
ACOUSTIC UNDERFOOT
PERFORMANCE ABS edge
Chipboard
MEETS Chipboard MEETS band
EN13501 core
EN13501 core
PARTS 1 & 2 PARTS 1 & 2
FIRE RATING FIRE RATING
• Tested in accordance with European Standard BS • Tested in accordance with European Standard BS
Construction EN12825 for raised access floors. EN12825 for raised access floors. Construction
Category Loose lay Category Loose lay
• Finished floor heights from 60mm to 370mm are available • Finished floor heights from 60mm to 1200mm are
Core material High density particle board Core material High density particle board
using standard pedestals. For heights outside of this range available using one of our standard pedestals. For heights
Panel construction Galvanised steel encapsulated
particle board core
alternative pedestals are available. Low finished floor outside of this range alternative pedestals are available. Panel construction Galvanised steel sheet, bottom or
top & bottom with edge banding
heights are achievable. Please contact head office for
more details. • The classifications given are based on the use of the
Kingspan range of pedestals.
Panel dimensions • The classifications given are based on the use of the Panel dimensions
Kingspan range of pedestals. • Uniformly distributed loads do not form part of EN12825
RG3 RG5 RG6 FDEB 1 FDEB 4 FDEB 6
and are therefore indicative ONLY.
Panel thickness (nominal) 31mm 31mm 32mm • Uniformly distributed loads do not form part of EN12825 Panel thickness (nominal) 31mm 31mm 39mm
BSEN
www.kingspanaccessfloors.co.uk raise your expectations
18 19
TL Series BSENA slim, BSEN grade access flooring system featuring a
Product performance (based upon a full Kingspan system)
Ultimate load
TL3
In excess of 8kN
TL5
In excess of 10kN
D-Lock BSEN
An economical solution, the D-Lock has a unique lock down
Product performance (based upon a full Kingspan system)
unique wrap around construction and screw corner locking. Working load with a
safety factor of 3
2.67kN 3.3kN system limiting movement and adding security. D-Lock 30 D-Lock 38
Impact sound insulation 76dB 76dB Uniformly distributed load* 7.5kN/m2 10kN/m2
FULLY
MEETS * Does not form part of BSEN 12825. ACCESSIBLE & *Does not form part of BSEN 12825.
EN13501 INTER-
26MM PANEL
PARTS 1 & 2 CHANGEABLE
IDEAL FOR
FIRE RATING PANELS
REFURBISHMENT
Panel Composition Panel Composition
High density
particle board
Unique wrap
around construction
LOCK DOWN
SCREW
SYSTEM FOR
DOWN Machined lock
STABILITY
down provision
SOLID
UNDERFOOT
• Tested in accordance with European Standard BS • Tested in accordance with European Standard BS
Construction EN12825 for raised access floors. EN12825 for raised access floors. Construction
Category Screw down Category Lock down
• Finished floor heights from 60mm to 375mm are available • Finished floor heights from 73mm to 380mm are available
Core material High density particle board using one of our standard pedestals. For heights outside using one of our standard pedestals. For heights outside Core material High density particle board
Panel construction Galvanised steel encapsulated of this range alternative pedestals are available. of this range alternative pedestals are available. Panel construction Machined particle board with
particle board core lock down provision
• The classifications given are based on the use of the • The classifications given are based on the use of the
Kingspan range of pedestals. Kingspan range of pedestals.
Panel dimensions Panel dimensions
• Uniformly distributed loads do not form part of EN12825 • Uniformly distributed loads do not form part of EN12825
TL3 TL5 and are therefore indicative ONLY. and are therefore indicative ONLY. D-Lock 30 D-Lock 38
BSEN
www.kingspanaccessfloors.co.uk raise your expectations
20 21
Pedestals Acoustideck
and Accessories Ideal for accommodation buildings where noise reduction is
important, the Acoustideck system features a snap-on
Product performance (based upon a full Kingspan system)
Based on Eurocode 5 (EC5) and factored according to EC1
flexible polymer based acoustic pad.
25mm* 30mm 38mm
Point load
capacity (SLS) 2.0 kN 2.7 kN 4.0 kN
Machined lock
down provision
EXCEEDS
IMPACT SOUND
REQUIREMENTS SNAP-ON
OF DOCUMENT POLYMER
Dimensions Dimensions Dimensions E
ACOUSTIC
Chipboard
Height range: Height range: Height range: PADS
16 - 347mm 20 - 620mm =/> 250mm
Height Height Height
adjustment: adjustment: adjustment:
+/- 40mm +/- 40mm +/- 40mm
Base: 80mm Base: 100mm Base: 120mm
Pedestal Usage Guide • Where a stringer is recommended for system heights • Acoustic performance achieves the requirements of part E Construction
≥450mm and ≥600mm the light clip on stringer is of Building regulations when used as part of Robust Detail
Panel material High density chipboard
BSEN Europed PSA Alpha V PSA Alpha III Stringer
provided only to aid stability at installation; it is not a floor construction E-FC-1, E-FC-2 & EFC 7.
D-Lock requirement to achieve system load rating. Support Zinc plated pedestals
C-Dec • Laboratory impact transmission performance when tested Support fixing 1 part adhesive
Acoustideck • For FDEB 38 the structural stringer must be employed at in accordance with ‘Appendix D’ of RD is: rd∆Lw = 19dB. Damping media Moulded TPR pad - thermo plastic rubber
all heights. Panel attachment Clamping washer and screw
RG Series PSA >600mm
• Finished floor heights from 45mm to 370mm are available
RG Series BSEN >600mm
• For Extra Heavy rating the box stringer must be employed using one of our range of standard pedestals.
Torlock PSA Airseal only with the correct version of the Alpha 3 pedestal. Heights & regulations
Torlock BSEN Airseal only • For heights outside of this range alternative pedestals are Finished floor heights 45mm to 370mm
BSEN
Stringer adds
lateral stability
See table above
for usage