Академический Документы
Профессиональный Документы
Культура Документы
In this
tutorial, we are going to show you all the steps required to create a VLAN and
configure a trunk using a Vmware ESXi server.
The video above shows how to configure VLAN using older versions of Vmware ESXi 6,
5.5 and 5
Vmware ESXi Playlist:
On this page, we offer quick access to a list of videos related to Vmware ESXi.
Playlist
On this page, we offer quick access to a list of tutorials related to Vmware Esxi.
List of Tutorials
Open a browser software, enter the IP address of your Vmware ESXi server and access
web interface.
vmware web interface
If you need to add another VLAN, click again on the Ad port group option.
On the right part of the screen, you are able to see the trunk configuration.
In our example, we can see that VLANS 100, 200 and 0 are able to pass through the
VMNIC1 interface.
Vmware Trunk native vlan
The VLAN 0 means a network packet without any VLAN tag.
Keep in mind that the Vmware interface VMNIC1 needs to be connected to a switch
port previously configured as a trunk.
The switch port needs to be configured to allow the traffic of VLANS 100, 200.
Any packet that arrives at the switch port without VLAN tags will be considered a
member of the native VLAN.
Now, we are going to teach you how to assign a virtual machine to a specific VLAN.
Click on the Actions button and select the option named Edit settings.
Vmware Virtual Machine Settings
On the virtual machine properties screen, you need to perform the following
configuration:
In our example, the network interface of a virtual machine was assigned to the VLAN
100.
Copyright © 2016 by B. T. R.
All rights reserved. No part of this publication may be reproduced, distributed, or
transmitted in any form or by any means without the prior written permission of the
publisher.