Академический Документы
Профессиональный Документы
Культура Документы
0030 W Adherence Test of Zinc Coating Shall be performed per ISO 2232, Annex B., or equivalent
standard. (note 2)
0040 W Weight of Zinc Coating Per 74-SAMSS-Test conducted as per ISO 2232 or equivalent.
(note 2)
0070 R b) Tensile Test Shall be performed per API 9A, or equivalent standard.
0080 H c) Breaking Test Shall be performed per API 9A, or equivalent standard, in
accordance with table 1 of 74-SAMSS-001. (note 3)
0082 H d) Proof/Elongation Test Shall be made on the complete cable assemblies where the
load shall be 50% of the cable minimum breaking strength as
specified in table 1 of 74-SAMSS-001.
0090 W Crimped Button Test Verify that button does not move over the cable, while stress is
applied on the button. Limit of movement as specified by cable
manufacturer and/or P.O.
0100 W Threads Must be inspected for conformity to the standard specified in the
Purchase Order description.
0120 W Packing and Shipping Cables must be supplied with protection against rough handling
and corrosion.
0130 R Certification Documentation All certification documentation for each individual cable must be
attached to it.
IR740100 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 10/31/2016 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 06/08/2011 IR740100 2 of 2
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0150 R X Product test certificates
Notes:
(1)Refer detailed instruction sheet SA175 form IR000003 of inspection requirement for ideal use of this form
(2)For galvanized wire ropes only.
(3)A representative sample of wire rope for each cable size for each Purchase Order shall be tested to failure.
End of IR740100