Академический Документы
Профессиональный Документы
Культура Документы
GTPM-4MST-19
ii TPF Messages (System Error, Offline, and Program Status Word)
Contents
Tables . . . . . . . . . . . . . . . v 01F000–01FFFF . . . . . . . . . . . . . 202
020000–02FFFF . . . . . . . . . . . . . 206
Guidelines. . . . . . . . . . . . . . 1 041000–041FFF . . . . . . . . . . . . . 212
042000–042FFF . . . . . . . . . . . . . 230
Analyze a System Error. . . . . . . . . . . 1
044000–044FFF . . . . . . . . . . . . . 230
System Services Control Point (SSCP) System
060000–060FFF . . . . . . . . . . . . . 231
Errors. . . . . . . . . . . . . . . . 1
094000–094FFF . . . . . . . . . . . . . 231
System Error Example . . . . . . . . . . 2
097000–097FFF . . . . . . . . . . . . . 237
Offline Message Formats . . . . . . . . . . 2
098000–098FFF . . . . . . . . . . . . . 238
Standard Messages . . . . . . . . . . . 2
0AD000–0ADFFF . . . . . . . . . . . . 248
Non-Standard Messages . . . . . . . . . 3
0DE000–0DEFFF . . . . . . . . . . . . 252
Locate an Offline Message . . . . . . . . . 5
11F000–11FFFF . . . . . . . . . . . . . 253
Analyze an Offline Message . . . . . . . . 5
888000–888FFF . . . . . . . . . . . . . 255
Standard Message Example . . . . . . . . 6
AB0000–AB0FFF . . . . . . . . . . . . 255
Non-Standard Message Examples . . . . . . 6
C62000–C62FFF . . . . . . . . . . . . 258
CE9000–CE9FFF . . . . . . . . . . . . 274
System Errors . . . . . . . . . . . . 9 F01000–FFFFFF . . . . . . . . . . . . . 275
000001–00004F . . . . . . . . . . . . . . 9
000050–00009F . . . . . . . . . . . . . 20
Offline Messages . . . . . . . . . . 285
0000A0–0000FF . . . . . . . . . . . . . 30
ALDR . . . . . . . . . . . . . . . . 285
000100–0001FF . . . . . . . . . . . . . 40
BBS0–BSN0 . . . . . . . . . . . . . . 286
000200–0002FF . . . . . . . . . . . . . 50
CBLD–CRA0 . . . . . . . . . . . . . 287
000300–00034F . . . . . . . . . . . . . 54
DAT0–DYO0 . . . . . . . . . . . . . 297
000350–0003FF . . . . . . . . . . . . . 62
FCTB . . . . . . . . . . . . . . . . 300
000400–00049F . . . . . . . . . . . . . 71
GEF0–GTSZ . . . . . . . . . . . . . . 324
0004A0–0004FF . . . . . . . . . . . . . 85
IOD0–IPTS . . . . . . . . . . . . . . 336
000500–0005FF . . . . . . . . . . . . . 97
LIBI–LOG0 . . . . . . . . . . . . . . 342
000600–00069F . . . . . . . . . . . . . 104
MSA0 . . . . . . . . . . . . . . . . 345
0006A0–0006FF . . . . . . . . . . . . . 112
NET0 . . . . . . . . . . . . . . . . 347
000700–00079F . . . . . . . . . . . . . 119
OLDR–ONL0 . . . . . . . . . . . . . 348
0007A0–0007FF . . . . . . . . . . . . . 133
PIUP . . . . . . . . . . . . . . . . 362
000900–0009FF . . . . . . . . . . . . . 142
RAM0–RES0. . . . . . . . . . . . . . 364
000E00–000EFF . . . . . . . . . . . . . 146
SALO–SYN0. . . . . . . . . . . . . . 364
001000–001FFF . . . . . . . . . . . . . 148
TLDR–TPFL . . . . . . . . . . . . . . 375
002000–002FFF . . . . . . . . . . . . . 148
UNI0–UTP0 . . . . . . . . . . . . . . 378
004000–004FFF . . . . . . . . . . . . . 149
VAGE . . . . . . . . . . . . . . . . 379
005000–005FFF . . . . . . . . . . . . . 159
ZZZ0 . . . . . . . . . . . . . . . . 383
006000–006FFF . . . . . . . . . . . . . 165
Miscellaneous . . . . . . . . . . . . . 385
007000–007FFF . . . . . . . . . . . . . 168
008000–008FFF . . . . . . . . . . . . . 182
009000–009FFF . . . . . . . . . . . . . 184 Program Status Words . . . . . . . 463
00C000–00CFFF . . . . . . . . . . . . 191 000A0000 xxxxxxxx–040AC000 00FFFFFF . . . . 463
Once you locate the system error, you will notice System Services Control Point
that the system error number is framed in a box
for quick access. Below each system error you
(SSCP) System Errors
will find the following pieces of information to System errors 000500–000517 relate to the system
help you analyze it. services control point (SSCP) function of SNA
support. Many of the problem determination
v Program
portions of the system error formats refer to the
Indicates the name of the program that found resource vector table (RVT) data contained in a
the error when that program is not available to block on level 6. This information is valid only if
the TPF system for display on the console and the resource identifier (RID) of the NODE in error
printed in the dump. is valid. The layout of the 128-byte block for these
v Error Message dumps follows here.
Provides the text of the system error that is Table 1. Layout of the 128–Byte Block for Dumps
displayed on your screen and in the dump, if
Position Definition
there is any. If there are supplementary
messages appearing in the dump, you will find 000 RVT1/RVT2 ADDR OF
more than one error message for each system INPUT NODE
error. 008 RID OF INPUT NODE
v Appended Message 012 RVT1/RVT2 DATA OF
Indicates additional informative messages INPUT NODE
provided by the programmer coding the 040 RVT1/RVT2 ADDR OF
SERRC macro. Appended messages are CONTROLLING NODE
displayed on the console and in the dump.
048 RID OF CONTROLLING
v Explanation NODE
Provides a brief description of the error
conditions and an indication of why an error
The following is an example of how system errors When reading from left to right, this format
and their associated information are presented. contains the following parts.
000101
Program: CCSNA1(CS01, CS07, CSX4)
Error Message: CONDITION CODE 1 RETURN TO SIOSC
Explanation: An SIOSC macro was issued and a condition
code 1 that was not valid was received from CIO. The SIOSC
macro processor in IPLB segment CCIO should only be
returning a condition code of:
v 0 (request accepted)
v 2 (SDA already active)
v 3 (SDA is not valid).
System action: A catastrophic system error is issued. The
system performs an IPL.
User response: See a system programmer to investigate the
problem. The problem may be a logic error in CIO.
Guidelines 3
Table 5. Non-Standard Messages – Format Table 6. Non-Standard Messages – Format
2 (continued) 3 (continued)
Part Description Part Description
ppp Represents a unique num A 3-digit message
message number. sequence number. A
severity code is associated
text The text of the message,
with each system
which explains the
generation message. All
resolution of the relevant
system generation
operands or an error
messages that are an
condition.
error-type message with
severity codes 5 or 7 will
v aaanum text suppress generation of the
When reading from left to right, the system Stage II job control
generation messages (which are produced by language (JCL). These
the assembler program during the expansion of errors must be resolved
and Stage I run again. See
system initialization program (SIP) macro
“Analyze an Offline
instructions) contain the following parts. Message” on page 5for
Table 6. Non-Standard Messages – Format 3 information about the
severity codes.
Part Description
aaa An abbreviation for the If an error is diagnosed in
SIP macro in which the a Phase 1 user macro,
error was detected. See there are 2 courses of
Table 7 for the SIP macro action:
abbreviations. v If the error is severe
and prevents further
checking of user input
parameters, an error
message will be
produced immediately
and record generation
will be suppressed.
These messages are
listed first by macro,
together with warning
and informational
messages output by
Phase 1 user macros.
v If the error does not
prevent further analysis
of user input, an error
switch is set on and the
error message is issued
at the time the
assembly listing is
generated.
text The text of the message.
COR CORREQ RES RESCAP Below each message you will find some or all of
CRA CRASTB SSD SSDEF the following pieces of information to help you
DAT DATACO STA Standard Error analyze the message.
v Severity
DDC DDCCAP SYN SYNCLK
GEF GENFIL UNI UNITRD Severity Type of Meaning
Code Message
GEN GENSIP USE USEREQ
0 Warning If the system generation
GLO GLOBAL ZZZ Internal
message is prefixed with any
GLS GLSYNC of the SIP macro abbreviations
found in Table 7 on page 4, the
UTP UTPROT
condition indicated may cause
IOD IODEV errors in Stage II or in the new
system. Otherwise, a 0 severity
code indicates a warning
Locate an Offline Message message that is not an error
and requires no action.
There are two ways to locate an offline message
depending on whether the message does or does 4 Not Indicates an error condition
Applicable that does not prevent
not have the standard message ID.
generation of a record. Default
values are used, if possible, or
If a message has the standard message ID, the space reserved for the
message IDs are listed in increasing numeric parameters in error. It may be
order preceded by their alphabetic prefix. To find possible to correct the error by
a message with the standard message ID, record patching the record after it is
the message ID from the message (for example, loaded. To assist in this, the
IPTS0004E) and then use the message ID to search system generation message is
for the message. positioned in the assembly
listing as close as possible to
If a message does not have the standard message the field that requires
correction. Alternatively, it
ID, the message is listed in one of the following
may be necessary to correct
ways:
the error and rerun Phase 1.
v A message ID of 000000000 and then presented
5 Error User error in coding of a SIP
in alphabetic order based on the initial message
macro instruction prior to the
text or the initial message text that follows the GENSIP macro.
variable information; usually the first or second
word in the message text. 7 Error The system generation
message is produced following
v Severity code (I, 2, 3, or S) that follows the first the GENSIP macro instruction.
asterisk (*).
v SIP macro abbreviation as shown in Table 7 on
page 4 followed by a 3-digit message sequence
number.
Guidelines 7
8 TPF Messages (System Error, Offline, and Program Status Word)
System Errors
User response: Analyze the system dump to determine the
000001–00004F cause of the error and correct.
000001 000004
Error Message: PROGRAM ERROR DETECTED IN CP. Error Message: VIRTUAL STORAGE ERROR IN CP. The
message consists of the program old PSW and general register
Explanation: A program error was detected by the control contents at the time of the error.
program while the TPF system was processing in the system
virtual address (SVA) space. The message consists of the Explanation: A segment-translation or page-translation
program old PSW and general register contents at the time of exception occurred while the TPF system was processing in an
the error. Following this, a list of the last 8 system errors that entry control block (ECB). This error is the result of a data
occurred since the last initial program load (IPL) of the TPF address or branch address that is not valid in an application
system is produced under the heading PREVIOUS ERRORS program or a data address that is not valid in the control
ENCOUNTERED. program (CP).
System action: After the system error dump is issued, the System action: The ECB is exited. If the entry was activated
alarm sounds once. Control returns to the central processing from an online console, notification is sent to the operator.
unit (CPU) loop. If another 000001 or 000002 system error is
User response: Analyze the system dump to determine the
found within 5 minutes of the initial error, a software IPL is
cause of the error and correct.
initiated.
User response: Analyze the system dump to determine the
cause of the error and correct. 000005
Program: CCNUCL(CHOZ)
000002 Error Message: None.
Program: CCCPSE(CPSE) Explanation: The program detected that the PSW was not
initialized by the Enter/Back program.
Error Message: VIRTUAL STORAGE ERROR IN CP. The
message consists of the program old PSW and general register System action: The program is exited. If entry was activated
contents at the time of the error. Following this, a list of the from an online console, notification is sent to the operator.
last 8 system errors which occurred since the last IPL of the
TPF system is produced under the heading PREVIOUS User response: None.
ERRORS ENCOUNTERED.
Explanation: A segment-translation or page-translation 000006
exception occurred while the TPF system was processing in
Program: CCNUCL(CICR)
the system virtual memory (SVM). This error is the result of a
data address or branch address that is not valid. Error Message: None.
System action: After the system error dump is issued, the Explanation: A program attempted to get a main storage
alarm sounds once. Control returns to the central processing block on an entry control block (ECB) data level or data event
unit (CPU) loop. If another 000002 or 000001 system error is control block (DECB) that is already holding a block.
found within 5 minutes of the initial error, a software initial
program load (IPL) is initiated. System action: The program is exited. If entry was activated
from an online console, notification is sent to the operator.
User response: Analyze the system dump to determine the
cause of the error and correct. User response: Modify the program.
000003 000007
Error Message: PROGRAM ERROR DETECTED IN CP. The Error Message: None.
message consists of the program old PSW and general register Explanation: The program attempted to release a main
contents at the time of the error. storage block from an entry control block (ECB) data level or
Explanation: A program error was detected by the control data event control block (DECB) that is not holding a block.
program while the TPF system was processing an application System action: The program is exited. If entry was activated
program in an entry control block (ECB) virtual address space. from an online console, notification is sent to the operator.
System action: The application program is exited. If entry User response: Modify the program.
was activated from an online console, notification is sent to
the operator.
000008 00000E
Program: CCNUCL(CCPU) Program: CCNUCL(CHIM)
Error Message: None. Error Message: CRET TABLE FULL
Explanation: A user attempted to exit while holding a record. Explanation: A program attempted to create an entry on a
System action: The program is exited. If entry was activated time-initiated basis and the CRET table is found full. This
from an online console, notification is sent to the operator. indicates an overload in the TPF system.
User response: Modify the program. System action: The ECB is ended. If entry was activated from
an online console, notification is sent to the operator.
Program: CCNUCL(CICR)
00000F
Error Message: None.
Program: CCSONP(GRFS)
Explanation: The program attempted to release a main
storage block from an entry control block (ECB) data level or Error Message: GRFS-DOUBLE RELEASE OF POOL ADDR
data event control block (DECB) that contains a block type
that is not valid. Explanation: A short term pool record was returned to the
pool twice.
System action: Program is exited. If entry was activated from
an online console, notification is sent to the operator. System action: Returns to the user program. The short-term
pool record remains available.
User response: Modify the program.
User response: None.
Explanation: A FACZC error occurred while encoding the 2 Specified record ordinal number was too high for
pool file address. the record type.
System action: A dump is issued and a software IPL is Explanation: The file address compute program was unable
forced. to compute a fixed-record address for the specified file storage
program. This is a catastrophic system error.
User response: Use the dump to determine why encoding of
the pool file address failed. It is possible that there was a System action: If CVEA, try again. Otherwise the machine
mismatch between the file address compute program (FACE) halts.
table (FCTB) and pool tables.
User response: If the machine halts, restart and/or correct
software error. If a retry is being attempted, no action is
required unless there is an error. In either case, a software
error must be corrected.
Cycle up above UTIL (utility) state for retry or correct the
software error immediately.
System Errors 11
00001A • 000024
00001A 000021
Program: CYE0, CUA8, CYE2 Program: CCSONA(CEFH)
Error Message: UNABLE TO READ CTKA Error Message: RECORD HOLD TABLE FULL
Explanation: The TPF system was unable to read keypoint A Explanation: An attempt was made to hold a record and the
(CTKA). This is a catastrophic system error. hold table is full. This is a catastrophic system error.
Error Message: READ/WRITE ERROR ON CYSDR System action: A dump is taken and the TPF system
performs a software IPL.
Explanation: The TPF system was unable to read or write a
pool directory record. This is a catastrophic system error. User response: Determine why the record hold table is full. If
it is because of an application problem, then the application
Error Message: ERROR ACCESSING IPAT RECORD should be fixed. If the record hold table is legally full, then the
Explanation: The TPF system was unable to read the size should be increased by changing the SIP input and
program allocation table (IPAT) record. This is a catastrophic running SIP.
system error.
System action: Machine stop. The Disk Queues will be 000022
processed followed by a software IPL and a cycle to 1052 state.
Program: CCFADC(CEFJ, CEFL)
User response: Restart or reload.
Error Message: FIND – ALREADY HOLDING A BLOCK
Explanation: A FIND macro was issued on an entry control
00001C
block (ECB) data level or data event control block (DECB) that
Program: CYC4, CYB0, CYC2, CYC3, CYE0 is already holding a block.
Error Message: FPDR REC ID OR CODE CORRUPTION System action: The program is exited. If entry was activated
DETECTED from an online console, notification is sent to the operator.
System action: The File Pool Directory's Record ID and/or User response: Modify the program.
the RCC was corrupted. Since other fields in the directory may
also be corrupt, a catastrophic system error results, causing
000023
software restart. The TPF system will automatically repair the
affected directory by using the file pool skipping factor. Program: CCFADC(CEFJ, CEFL)
User response: See your system programmer for more Error Message: FILE – NOT HOLDING A VALID BLOCK
information. If the skipping factor is normally low, the user
may want to increment it through the ZGFSP SKP command Explanation: A FILE macro was issued but the associated
prior to cycling back to NORM state. entry control block (ECB) is not holding a main storage block
at the specified ECB data level or data event control block
(DECB).
00001F
System action: The program is exited. If entry was activated
Program: Displayed on the console and in the dump. from an online console, notification is sent to the operator.
Error Message: DISK ERROR ON KEYPOINT UPDATE User response: Modify the program.
Explanation: An error occurred on disk during a keypoint
update. This could be either a software or hardware error. This 000024
is a catastrophic system error.
Program: CCSONA(CEFH)
System action: The machine is stopped.
Error Message: UNHOLD – ENTRY NOT IN HOLD TABLE
User response: Restart or reload.
Explanation: This error is issued for one of the following
reasons:
000020 v An attempt is made to release a record that is not present in
Program: CCIO the hold table.
v An attempt is made to release a record that is not held by
Error Message: None.
this ECB or whose Hold request did not complete. An ECB
Explanation: CCIO has detected a logical device that is part is not granted ownership of a record until the Find request
of a broken chain of queued interrupts. The chain was created posts the request to the requesting ECB. Normally, the ECB
by CPIO during pre-emptive I/O processing. At the end of must issue a WAITC macro before this occurs. If the ECB
pre-emptive I/O, this chain of interrupts should have been issues a UNFRC macro after a FINHC macro without
completely dispatched. waiting for completion of the FINHC macro, a CTL-000024
dump occurs.
System action: Processing is continued.
System action: The program is exited. If entry is activated
User response: Notify a system programmer. The cause for from an online console, notification is sent to the operator.
CPIO not processing the queued interrupt chain to completion
needs to be corrected. User response: Modify the program causing the dump.
User response: Modify the program. Error Message: INVALID OR INACTIVE DECB AT POST
INTERRUPT
Explanation: During WGTA initialization, it is determined System action: The program is exited. If entry was activated
that there are pseudo line number, interchange address, and from an online console, notification is sent to the operator.
terminal address (LNIATA) defined in the resource vector User response: Analyze the dump.
table (RVT) that are not in the WGTA. This dump contains the
list of RVT LNIATAs that are not in the WGTA. Up to 1000
LNIATAs will be recorded in the dump. Also see the 00002F
CGT0553W message.
Program: CCFADC(CEFJ)
System action: Processing is continued.
Error Message: FILE – RECORD CODE CHECK FAILURE
User response: Review the system error dump to verify the
Explanation: A FILE was issued and the record code in the
validity of the pseudo LNIATAs that were flagged. If they are
file address reference word does not agree with the record
valid, add them to the UAT and reinitialize the WGTA. If they
code in the header of the record.
are not valid, correct the RVT information, rerun OSTG, and
re-IPL the TPF system. System action: The program is exited. If entry was activated
from an online console, notification is sent to the operator.
00002D User response: Modify the program or the data record.
Program: CCFADC(CEFJ,CEFL)
000030
Error Message: FILE – INVALID FILE ADDRESS
Program: CCSONS(CJIP)
Explanation: A FILE was issued to a file address that is not
valid. Error Message: UNABLE TO FILE RECORD TO DATABASE
System action: The program exits. If the entry was activated Explanation: For the FILEC, FILUC or FILSC macros,
from an online console, the TPF system notifies the operator. CCSONS was unable to file the subject record to any module.
Therefore, CCSONS issues this system error to dump a copy
User response: Analyze the dump to find out why the
of the record for later restoration by a system programmer.
address is incorrect.
System action: On return from the dump and if get file
Error Message: ZERO FILE ADDRESS
storage (GFS) is active, the error monitor program CPSR is
System Errors 13
000032 • 000038
invoked with a copy of the record and the file address. If GFS Explanation: The following conditions can cause this error:
is not active, the core block and I/O block are released. v An attempt is made to release a record that was not
User response: Analyze the dump. previously verified. This is a catastrophic system error.
v An attempt is made to mark a hold request complete, but
the request was already marked complete. This is a system
000032 error dump with return.
Program: CCFADC(CEFJ) System action: If this is a bad release request (condition 1), a
Error Message: FILE – BLK AND REC SIZE DISAGREE catastrophic system error occurs; otherwise, a system error
dump is issued and the TPF system returns.
Explanation: A FILE was issued and the storage block size
and the file record size disagree. User response: Review the main storage dump to determine
why the logic error occurred. Either the indicator in the record
System action: The program is exited. If entry was activated hold entry was destroyed or the routine was entered in error.
from an online console, notification is sent to
User response: Modify the program. 000038
Program: CCSONS(CJIO, CJIT, CJIQ, CJIE, CJIW, CJIV)
000033
Error Message: UNUSUAL DASD STATUS
Program: CCCWTN(CCW1, CJIS)
Explanation: Unusual CSW status flags presented for a
Error Message: INVALID ADDRESS IN CCW CHANNEL DASD I/O operation.
PROGRAM
System action: The unusual status bits are ignored and
Explanation: The CCW translator was unable to resolve the processing continues.
address in the channel program.
User response: None.
System action: The ECB exits with a dump.
Error Message: UNEXPECTED CE, DE INTERRUPT
User response: Do the following:
Explanation: A Channel End, Device End I/O interrupt was
1. Use the dump to determine why the address is not valid.
presented for a DASD, but there is no I/O block in the
2. Correct the program that built the channel program. module queue for this device.
System action: The ECB is ended. System action: The device is ignored and processing
continues.
User response: Modify the program.
User response: None.
000035 Error Message: DASD ERROR CORRECTION FUNCTION
FAILED FOR devaddr
Program: CCSONA(CEFH)
Where:
Error Message: ECB REQUEST TO HOLD RECD TWICE
devaddr
Explanation: An ECB has requested to hold the same record
A device address.
twice.
Explanation: The Error Correction Function for correctable
System action: The ECB is ended.
data checks on a DASD failed. This may indicate an error in
User response: Modify the program. the TPF implementation of this function.
Error Message: CRW — INOPERATIVE CHANNEL PATH Error Message: MOD DOWN, SDA sda text BOTH PRIME
AND DUP UNUSABLE FOR REL MOD num
Explanation: A CRW was received from a channel path in
terminal condition that cannot be reset. Where:
System action: CNCEX9 handles this situation as a sda The symbolic device address (SDA) of the module just
catastrophic system error. taken down.
User response: None. text Descriptive text as to why the module was taken down.
num
000037 Relative module number of the PRIME for which both
DUP and PRIME were lost.
Program: CCSONA(CEFH)
Explanation: Routine CJXNOP was invoked to take a module
Error Message: ILLOGICAL CONDITION RECOGNIZED BY down. CJXNOP checked the duplicate of the module and
RECORD HOLD PROCESSING found it was not usable.
System action: CCSONS issues a catastrophic system error to Error Message: RCS SUBSYSTEM CFWID CORRUPTION –
force TPF system termination, to prevent keypointing of the PROCESSING CONTINUES
lost module and thereby further database corruption.
Explanation: The Cache Fast Write ID has been zeroed. Zero
User response: Analyze the dump. is not a valid value.
Error Message: DASD CHANNEL PROGRAM ERROR FOR System action: A dump is taken and then an attempt is made
devaddr to get the correct value from the control unit.
Where: User response: None.
devaddr Error Message: LOGIC ERROR, UNDEFINED CC FROM
A device address. SIOSC MACRO
Explanation: The CSW presented for a DASD I/O operation Explanation: A SIOSC macro was issued and the resulting
contains one of the following indicators: program controlled condition code was a 2, which is undefined for a SIOSC call.
interrupt, program check, or protection check. Or, the sense
System action: A catastrophic system error is issued.
data presented following a DASD Unit Check indicates one of
the following error types: User response: Analyze the dump.
v Command reject
v File protect Error Message: CCSONS LOGIC ERROR OR INVALID IOB
v End of cylinder.
Explanation: A Channel End, Device End I/O interrupt was
presented for a DASD; however, the IOB address passed from
Note: This system error does not apply to I/O operations CIO is not equal to the value of the first in queue pointer, or
performed in support of the FDCTC macro. the IOB operation code is not valid.
System action: The TPF system halts. A re-IPL is necessary. System action: A catastrophic system error is issued.
User response: None. User response: Analyze the dump.
Error Message: ERROR IN CCW TRANSLATE MAP Error Message: CCSONS LOGIC ERROR. IOB NOT FOUND
ON MODULE QUEUE
Explanation: The CCW Translate Routine (CJIS) found a logic
error. This situation implies that program code or control Explanation: A call was made to the routine to remove an
blocks were destroyed. IOB from the module queue but the IOB could not be found
System action: A catastrophic system error is issued. on the module queue.
User response: Analyze the dump. System action: A catastrophic system error is issued.
Error Message: PROGRAM ERROR BACK TRANSLATING User response: Analyze the dump.
CCW Error Message: FILUC IOB FOUND ON ENTRY TO CJIO
Explanation: The CCW CJIS translate routine was unable to Explanation: An IOB with a macro ID of a FILUC was found
convert the completion address from the CSW to a user’s in the I/O interrupt routine. This is illogical because all
CCW. FILUCs are converted to a FILE request and an UNFRC
request.
System action: A software error is forced for the user and the
first CCW of the user’s channel program is used as the System action: A catastrophic system error is issued.
completion address.
User response: Analyze the dump.
User response: Analyze the dump.
Error Message: INVALID DEVICE INTERRUPT OR
Error Message: UNLOCK FAILURE, NO LOCK FOUND FOR INTERRUPT SEQUENCE FOR devaddr
FA fileaddr LN lockname ON controlunit
Where:
Where:
devaddr
fileaddr A device address.
The 8-byte file address.
Explanation: CCSONS received an interrupt that it did not
lockname understand or is not valid within the current sequence of
The lock name. interrupts from the device.
controlunit System action: CCSONS resets the device and retry the
The control unit. operation.
Explanation: When attempting to unlock a lock in the control User response: None.
unit, the unlock failed because some other operation unlocked
it. This is a logic failure. Error Message: INVALID RETURN CODE FROM ERROR
RECOVERY PROGRAM
System action: The unlock failure is reported and then
ignored. Explanation: The error recovery routine, CJIX or CJIY
returned a zero return code that is not a valid return code for
User response: None. the call made.
System Errors 15
00003A
System action: A catastrophic system error is issued and the position of copy from the coupling facility (CF) and a read
TPF system is re-IPLed. error occurred.
User response: Analyze the dump. System action: The active copy that received the error is
aborted.
Error Message: USER LOGIC ERROR IN USE OF FCTLC
MACRO User response: Do one of the following:
Explanation: A real time program has executed a FCTLC v If other system errors were reported, follow the
macro and did not meet the entrance requirements. recommended procedures for correcting those system errors.
v If this system error occurs without other system errors
System action: The ECB is exited after a dump is taken.
being reported for the CF, see your IBM service
User response: None. representative.
Error Message: LOGIC ERROR DURING COPY SWAP Error Message: ERROR EXECUTING CF READ OF COPY
POINTER
Explanation: CCSONS was attempting to replace the current
online module with its copy as part of the ZMCPY end of job, Explanation: The TPF system tried to read the current
but was unable to do so because the copy TO module was not position of copy from the coupling facility (CF) when CF
in the expected state. support returned an error.
System action: CCSONS resets the copy swap request. System action: The active copy that received the error is
ZMCPY requests the module swap again. aborted.
Error Message: CF READ OF COPY POINTER RETURNED v The CIO LDEVBK for the device
AN ERROR v The active input/output block (IOB)
Explanation: The TPF system tried to read the current v The MFST section 1 for the device.
User response: Analyze the dump.
00003E
00003D
Program: CCCCP3 (CLQK)
Program: CCSONS (CJIX, CJIY)
Error Message: NO CORE BLOCKS AVAILABLE
Error Message: NO RECORD FOUND ON sda
Explanation: Routine CPMAGCI in segment CICR of CSECT
Where: CCNUCL was called to obtain the address of a core block of a
particular block type. However, this routine has determined
sda The symbolic device address.
that there are no core blocks available of the requested block
Explanation: A hardware detected programming error or type.
expected programming condition occurred.
System action: The ECB is exited.
System action: The I/O operation is processed as a hardware
User response: Have your system programmer check the
error. A message that indicates no record is found is sent to
main storage allocation for the requested block type.
the prime computer room agent set (CRAS) console and sense
data is recorded on the RTL tape.
00003F
User response: Analyze the dump.
Program: Displayed on the console and in the dump.
Error Message: INVALID TRACK FORMAT ON sda
Error Message: None.
Where:
Explanation: An error occurred during the FILNC macro
sda The symbolic device address.
processing.
Explanation: The sense data presented following a DASD
System action: Return to the user.
Unit Check indicates a track format that is not valid.
User response: None.
System action: The I/O operation is processed as a hardware
error. A message indicating a track format that is not valid is See TPF General Macros for more information about control
sent to the prime computer room agent set (CRAS) console program usage and unusual I/O conditions.
and sense data is recorded on the RTL tape.
User response: If the error continues, reformat the track in 000040
error.
Program: Displayed on the console and in the dump.
Error Message: INVALID COMMAND PARAMETER
Error Message: TPLD READ ERROR
Explanation: The sense data presented following a DASD
unit check indicates that the input value for a CCW parameter Explanation: An I/O error occurred while trying to read the
was not valid. tape label directory record.
System action: The I/O operation is processed as a hardware System action: The ECB is ended.
error. A message indicating an argument that is not valid is
User response: Ensure that the TPLD and TLMR records are
sent to the prime computer room agent set (CRAS) console
initialized in the subsystem that returned the error.
and sense data is recorded on the RTL tape.
If the records are initialized, this probably indicates a
User response: Use the dump and console messages to
hardware error and the system error dump must be reviewed.
determine the failing CCW. See the specific command
The level five SUD field in the ECB must be reviewed for the
description in the appropriate storage control reference
cause of the retrieval error.
manual for possible reasons for the failure.
Error Message: ATTEMPT FILE TO WRITE PROTECTED
PACK ON sda
Where:
System Errors 17
000041 • 000049
Error Message: TLMR READ ERROR System action: The ECB is ended.
Explanation: An I/O error occurred while trying to read a User response: Review the system error dump.
tape label mask record. This is probably a hardware error.
If the error occurs during a close operation, first check that the
System action: The ECB is ended. close attempt is valid (for example, not an alternate (ALT),
real-time, or standby tape) and if necessary correct the
User response: Review the system error dump. application program issuing the close macro. Loss of control of
The level six SUD field in the ECB must be reviewed for the the device may be the result of operator intervention, for
cause of the retrieval error. example, the use of the ZTOFF command. Check field
CPMTID in section 2 of the tape status table to determine the
identity of the last seizing program.
000042
Program: Displayed on the console and in the dump. 000047
Error Message: TPLD WRITE ERROR Program: Displayed on the console and in the dump.
Explanation: An I/O error occurred while trying to write the Error Message: NO TPLD/TLMR ENTRY FOR REQ TAPE
tape label directory record back to file. Probably a hardware
error. Explanation: While trying to close, dismount, or switch a
tape, an unsuccessful attempt was made to retrieve the label
System action: The entry control block (ECB) is ended. mask record for the tape in question.
User response: Review the system error dump. System action: Control returns to the routine attempting to
read the label mask record. A manual tape switch operation
The level five SUD field in the ECB must be reviewed for the
will exit with the appropriate error message, but in all other
cause of the filing error.
cases a warning message is sent and processing continues. If
the current operation is a close dismount or CP initiated
000043 switch of an output tape, then two tape marks are written in
place of the standard trailer labels.
Program: Displayed on the console and in the dump.
User response: Almost certainly an operational problem since
Error Message: TLMR WRITE ERROR this error implies that a tape label mask record was deleted
Explanation: An I/O error occurred while trying to write a while the tape in question is mounted on the TPF system.
tape label mask record back to file. This is probably a Review the operational procedures.
hardware error.
System action: The entry control block (ECB) is ended. 000048
User response: Review the system error dump. Program: Displayed on the console and in the dump.
The level six SUD field in the ECB must be reviewed for the Error Message: TAPE CU XREF TABLE READ ERROR
cause of the filing error.
Explanation: During tape restart the TPF system was unable
to retrieve the tape control unit cross reference table from file.
000045
System action: The entry control block (ECB) is ended.
Program: Displayed on the console and in the dump.
User response: Review the system error dump.
Error Message: END OF REEL DETECTED ON BKWD OP
Ensure that the table is generated and loaded correctly and
Explanation: An end-of-volume condition was found on a that the online disks are not corrupted. The cross reference
backward tape operation. The module queue of the device was table (COSY) is retrieved as a data record on level four.
scanned to determine the type of backward operation, but Inspection of the contents of the file address and main storage
failed to locate the relevant IOB. block reference words for that together with the detail and
System action: The ECB is ended. gross error indicators, will determine the reason for failure to
retrieve.
User response: Review the system error dump. There has
probably been a corruption of section 2 of the tape status
table. 000049
Program: CCTAPE(CEFE)
000046 Error Message: INVALID BLOCKED TAPE OPERATION
Program: Displayed on the console and in the dump. Explanation: One of the following errors occurred:
Error Message: UNABLE TO SEIZE THE TSTB v A TBSPC macro was issued to a tape mounted in blocked
mode
Explanation: Either an attempt that is not valid was made to
v A TDCTC macro or a TDTAC macro that specified a Read System action: A permanent error is posted to the originating
Backwards command was issued to a tape mounted in ECB or, if applicable, a tape switch is performed.
blocked mode.
User response: Review the content of the tape to determine
System action: The ECB is ended. whether the operation with the missing interrupt completed
successfully. Some data loss may occur as the status of the
User response: Do one of the following: operation at the top of the module queue is unknown.
v Mount the tape in unblocked mode and run the application
program Program: CCTAPE(CEFE)
v Modify the application program. Error Message: TAPE DEVICE tapedev STALLED MODULE
QUEUE DETECTED
00004A Where:
Program: CCTAPE(CEFE)
00004E
Error Message: TAPE DEVICE tapedev INTERRUPT
TIMEOUT VALUE EXCEEDED Program: CCTAPE(CEFE)
System Errors 19
00004F • 000054
User response: Review the system error dump to determine Ensure that the problem is not the result of operator
the device address. intervention by checking that the tape has an entry in the tape
status table.
As soon as possible take the device in question offline and see
your IBM service representative. The following macros must not be used by application
programs unless the specified tape was assigned to the ECB
through a TOPNC or TASNC:
000051 v TWRTC
Program: CCTAPE(CEFE) v TPRDC
v TREWC
Error Message: TAPE tapename NOT IN TSTB v TDCTC
v TPCNC
Where:
v TDTAC
tapename v TRSVC
The name of the tape. v TCLSC
v TBSPC.
Explanation: A TASNC macro was issued but the tape macro
service routines can find no entry for the tape in the tape
status table. 000054
System action: The entry control block (ECB) is ended. Program: CCTAPE(CEFE)
User response: Review the system error dump to determine Error Message: TAPE tapename ALREADY OPEN
which program issued the TASNC macro.
Where:
Application programs must not issue the TASNC macro for a
tape that has not already been opened through a TOPNC, as tapename
the TOPNC processing will ensure that the tape is mounted. The name of the tape.
Explanation: A TOPNC macro was issued but the tape macro
service routines found that the specified tape is already
indicated as open in the tape status table.
System action: The ECB is ended.
be the result of operator intervention, for example, the which is to be used for a TPRDC macro, then it is essential to
operator initiated an application program requiring a tape that release the level, through a RELCC or CRUSA macro, before
is already in use. issuing the TPRDC macro.
System action: The entry control block (ECB) is ended. This error can occur because of, for example, a retrieval error
on a previous FINWC macro.
User response: Review the system error dump to determine
which program issued the TASNC macro.
00005A
Application programs must not issue TASNC for tapes that
are already assigned to the ECB. Program: CCTAPE(CEFT)
Error Message: TAPE I/O ERROR NO RECOVERY/AMSS
000056 Appended Message: None.
Program: CCTAPE(CEFE) Explanation: A tape I/O error occurred for which the control
Error Message: INVALID PARAMETERS FOR TPINC program tape routines have no recovery procedure defined
and for which AMSS recording is not performed.
Explanation: A TPINC macro was issued with parameters
that are not valid. System action: Control returned to the entry control block
(ECB) with the appropriate error flag set.
System action: The entry control block (ECB) is ended.
User response: This error condition can cause the loss of
User response: Review the system error dump. critical system records on the tape. It is essential that all such
errors be checked for possible impact of this type.
System Errors 21
00005B • 000060
v The address of the IOB returned by CIO at interrupt time User response: Review the system error dump.
differs from that of the IOB at the head of the module
Where the special tape name is used, the correct tape module
queue for the device, indicating that the device queues are
number must be saved in CE1TAP prior to issuing the macro.
corrupted.
Where the special tape name is not used, the application
System action: A catastrophic system error is issued. program must not modify CE1TAP. An application program
must not modify the tape chain field (CPMTDP) of any entry
User response: Review the system error dump. Queue in the tape status table.
corruption is indicated when the contents of the location
pointed to by R4 and the contents of R1 do not agree.
Corruption of TSTB section 2 is probable. 00005E
If queue corruption is not indicated, then a SIOSC error has Program: CCTAPE(CEFT, CEFS)
occurred. Condition code 1 indicates a CIO logic error, while
condition code 2 indicates that CCTAPE is attempting to Error Message: UNRECOVERABLE TAPE I/O ERROR
initiate an I/O request that is already active. Possible causes of Explanation: An unrecoverable tape I/O error for which
these conditions are: AMSS error recording is required occurred.
v Corruption of CIO
System action: Control returns to the entry control block
v Corruption of the CP (ECB) with the appropriate error flags set.
v Corruption of status information in the TSTB or tape IOBs.
User response: This error condition can cause the loss of
critical system records on the tape. It is essential that all such
00005B errors be checked for possible impact of this type.
Program: CCTAPE(CEFE) Refer to the message that is sent to prime computer room
agent set (CRAS) console for details about the error. See TPF
Error Message: CE1IOC ALREADY ZERO AT OP END Operations for more information about tape support.
Explanation: The post interrupt processing routine for a tape
I/O macro finds that the entry control block (ECB) I/O 00005F
counter was already set to zero.
Program: CCTAPE(CEFE)
System action: ECB processing is continued.
Error Message: INVALID TAPE NAME SPECIFIED
User response: Review the system error dump. It is possible
that the main storage is corrupted. Explanation: An application program coded a tape macro
that uses the name parameter to point to the tape name. The
Application programs must not modify the ECB I/O counter tape name indicated is not valid.
(CE1IOC).
System action: The application program ends.
00005C User response: Review the contents of R14 to find the error.
Bytes 1 through 3 of R14 contain the invalid tape name
Program: Displayed on the console and in the dump. pointed to. To be valid, the tape name must be assigned a
Error Message: TAPE MACRO USED PRIOR TO TAPE three-character tape name.
RESTART COMPLETION See TPF Operations for more information about valid character
Explanation: An attempt was made to use one of the tape names.
following tape macros before tape restart completed:
v TOURC 000060
v TOUTC
v TSYNC Program: CCENBK(CCEB)
v TASNC
Error Message: ECB EXCEEDED MAXIMUM PROGRAM
v TOPNC.
NESTING
System action: The ECB is exited.
Explanation: The TPF system has been defined to limit the
User response: Modify the program that is trying to use the number of program nesting levels to the number that can fit in
macro such that the macro waits for tape restart to complete the entry control block (ECB). You can use the ZCTKA
before issuing the macro. DISPLAY command to display the number of program nesting
levels that can fit in the entry control block (ECB).
00005D The number of program enters with return (ENTRCs) and the
number of programs that were locked in main storage
Program: CCTAPE(CEFE) (GETPCs) during processing of the entry has exceeded the
Error Message: ECB TAPE CHAIN CORRUPTED number of program nesting levels that can fit in the ECB. The
dump displays the program nesting levels in the ECB.
Explanation: A tape macro was issued but the tape macro
service routines find that the ECP tape chain (CE1TAP or System action: The ECB ends. If an entry was activated from
CPMTDP) does not contain a valid tape module number. an online console, notification is sent to the operator.
System action: The entry control block (ECB) is ended. User response: Do one of the following:
v Review the program nesting levels displayed in the dump This error indicates that the program or load module was not
to determine whether any of the program enters with return loaded to file or that the file copy was corrupted. The SNAP
(ENTRCs) can be changed to program enters with no return dump displays the header and PAT entry of the retrieved
(ENTNCs). record.
v Enter ZCTKA ALTER NEST-NOLIMIT to allow an System action: The ECB ends. If the entry was activated from
unlimited number of program nesting levels. an online console, notification is sent to the operator.
See TPF Operations for more information about the ZCKTA User response: Do the following:
DISPLAY and ZCTKA ALTER commands. 1. Check the reason why the record header is not correct.
2. If necessary, load the program or load module again.
000061
Program: CCENBK(CCEB, CCED) 000064
System Errors 23
000067 • 00006D
Program: CCENBK(CCEB)
000069
Error Message: ATTEMPTED TO ENTER SPARE
Program: CCENBK(CCEB)
ALLOCATED PROGRAM
Error Message: ECB EXITING ON WRONG I-STREAM
Explanation: An attempt was made to enter a program that
Explanation: The I-stream number in the ECB was not equal was allocated as a spare program.
to the number in the prefix page during EXITC processing.
System action: The ECB is ended. If entry was activated from
Either the ECB was corrupted or processing incorrectly
an online console, notification is sent to the operator. The
switched to another I-stream.
SNAP dump displays the program allocation table (PAT) entry
System action: The I-stream number in the ECB is corrected of the spare program.
and processing continues.
User response: Check the problem to determine why the
User response: None. spare program is being entered. If necessary, change the
program's allocation and load it to its online file location.
00006A
00006D
Program: CCENBK(CCEB, CCEC)
Program: Displayed in the console
Error Message: INVALID PROGRAM NAME OR INDEX
Error Message: INVALID ACTIVATION NUMBER
Explanation: One of the following errors occurred: DETECTED
v The program allocation table (PAT) entry for the supplied
Explanation: One of the following errors occurred:
program could not be found.
v The ECB activation table (EAT) is corrupt
v The supplied PAT displacement index was not valid.
v The activation number in the ECB is corrupt.
v You tried to enter the base version of an unallocated
program.
This condition is detected while performing the following
System action: The ECB ends. If the entry was activated from functions:
an online console, the operator is notified. The SNAP dump
v ECB creation (CICR)
displays the program data (either the name or displacement
index) that is used to locate the PAT entry. The following v ECB exit (CCEB)
additional information is provided in the SNAP dump if you v SWISC create (CCE4)
tried to enter an unallocated program: the ECB activation
v E-type loader selective activation (CEL9).
number, the base PAT slot of the unallocated program, and the
System action: The ECB is exited. The SNAP dump displays
Error Message: INVALID LIST VALUE IN GRAMMAR Error Message: ‘C’ STATIC STORAGE REQUEST ERROR
Error Message: TOO MANY CHARACTERS IN Appended Message: C STATIC FRAME EXCEEDS
MANDATORY PARAMETER LIST MAXIMUM ALLOWED
Error Message: UNEVEN BALANCE OF LEFT BRACES IN Explanation: The static frame size exceeds maximum size.
THE GRAMMAR System action: The ECB is ended.
Error Message: UNEVEN BALANCE OF LEFT BRACKETS User response: Reduce the number of static variables used by
IN THE GRAMMAR the C function.
Error Message: UNMATCHED PARENTHESIS IN
GRAMMAR 000072
Explanation: The grammar is in error. The messages are Program: CCLANG(CL02)
self-explanatory.
Error Message: ‘C’ STACK FRAME REQUEST ERROR
System action: The ECB is ended.
Appended Message: SIZE OF REQUESTED ‘C’ STACK
User response: Correct the grammar. FRAME EXCEEDS MAXIMUM ALLOWED
See the TPF C/C++ Language Support User's Guide for more Explanation: The stack frame size exceeds the maximum
information about the IBM C message parser and defining frame size.
grammar.
System action: The ECB is ended.
Error Message: INVALID PARAMETER VALUE FOR
BLDPRSTR User response: Reduce the number of automatic variables
used by the C function.
Explanation: One or more of the size parameters
(parse_out_size, parm_size, or value_size) passed to
IPRSE_bldprstr is a non-positive integer. 000073
System action: The ECB is ended. Program: CCLANG(CL02)
User response: Change the parameters that are not valid to Error Message: ‘C’ SET LOCALE REQUEST ERROR
the appropriate values
Appended Message: INVALID LOCALE NAME SPECIFIED
See the TPF C/C++ Language Support User's Guide for more BY STACK EXCEPTION USER EXIT
information.
Explanation: A locale name that is not valid was specified by
the stack exception user exit.
System action: The ECB is ended.
System Errors 25
000074 • 000078
User response: Request a valid locale name. Explanation: A program wrote over node control data (for
example, header and uplink addresses) surrounding allocated
See the TPF C/C++ Language Support User's Guide for more storage. The approximate address of the corruption is
information about specifying locales. contained in R1.
Error Message: INVALID GLOBAL AREA SPECIFIED User response: Do one of the following:
v Contact your system programmer to determine why this
Explanation: A global area that is not valid was specified.
error is occurring and correct the problem.
System action: The ECB is ended. v Enter the ZIDOT command to bypass the error.
User response: Specify a valid global area.
See TPF Operations for more information about the ZIDOT
Error Message: INVALID CRETC TIME VALUE SPECIFIED command.
Explanation: The TPF system issues this message when a
negative time value parameter is coded in the CRETC macro. 000077
System action: None. Program: CLIB
User response: None. Error Message: ERROR LOCKING PROGRAM IN CORE
Error Message: INCOMPATIBLE JMPBUF PASSED TO Explanation: An ISO-C library that was allocated as preload
LONGJMP FUNCTION could not be fetched. The SNAP dump displays the program
Explanation: A jmpbuf that is not valid was specified. allocation table (PAT) entry. The PAT entry contains the name
of the ISO-C library that could not be fetched.
System action: The ECB is ended.
System action: Restart processing continues.
User response: Correct error in function call.
User response: Do the following:
Appended Message: SIPCC-LIST-PTR MISSING OR NOT 1. Determine why the GETPC on the library failed.
VALID
2. Correct the error.
Explanation: A sipcc_list_ptr parameter was required but 3. IPL the TPF system.
not specified or the parameter value was NULL for a sipcc
function call.
000078
System action: The entry control block (ECB) ends.
Program: CCEB
User response: Determine why the sipcc_list_ptr
parameter was missing or specified a null value and correct Error Message: ENTERED DEACTIVATED PROGRAM –
the error in the function call. ECB EXITED
See the TPF C/C++ Language Support User's Guide for more Explanation: The entry control block (ECB) entered a
information about the sipcc function. program in a loadset that was deactivated when a ZOLDR
DEACT command with the SERRC parameter specified was
entered.
000075
System action: The ECB is exited.
Program: Displayed on the console and in the dump.
User response: None.
Error Message: CORRUPTION DETECTED IN HEAP AT
addr ADDRESS See TPF Operations for more information about the ZOLDR
DEACT command.
Where:
addr
The address.
Error Message: HEAP STORAGE EXHAUSTED Program: Displayed on the console and in the dump.
Explanation: The parser is unable to allocate sufficient heap Error Message: A PBI FOUND IN THE ECB IS NOT VALID
storage to complete its processing. Explanation: While releasing programs during EXITC
System action: The ECB is ended. processing, the Program Base Identification (PBI) was found
corrupt in the C static storage.
User response: Determine why the ECB heap storage was
depleted. System action: The entry control block (ECB) completes
EXITC processing and no other C file resident programs are
released.
00007C
User response: Review the system error dump to determine
Program: CILA the cause of the PBI corruption and correct the error.
System Errors 27
00007F • 000085
prior to the system error routine, register 1 is set up to contain message block contains the name of the originating application
the address of the block that could not be released. program.
Program: Displayed on the console and in the dump. Explanation: A SENDL macro was issued with the data level
holding a 1055-byte or 4K block.
Error Message: C LANGUAGE STATIC BLOCK RELEASE
ERROR System action: Return to calling program
Explanation: Attempts to release IBM C language static User response: Modify the program to use correct SEND
blocks during SWISC, ENTDC, or EXITC processing failed. interface.
This message will follow a 0006DA system error, which
indicates a block release error. 000083
System action: The entry control block (ECB) is ended and a Program: CCCCP1(CLXE)
dump of the ECB and working storage is generated. No other
IBM C language static blocks attached to this ECB are Error Message: None.
released. Therefore those blocks can no longer be used by the
Explanation: A SEND was issued but a message block is not
TPF system. Immediately prior to the system error routine, R1
being held.
is set up to contain the address of the block that could not be
released. System action: The ECB is ended. If entry was activated from
an online console, notification is sent to the operator.
User response: A failure to release IBM C language static
blocks is usually the result of block corruption. Determine the User response: Modify the program to use correct SEND
cause of the error. interface.
000080 000084
Program: CEDI(CCNUCL) Program: CCCCP1(CLXE)
Error Message: WTOPC DETECTED BAD ADDRESS IN Error Message: None.
PARM LIST
Explanation: The communication line number referenced in
Explanation: The WTOPC service routine detected a bad the SENDC or ROUTC macro is outside the allowable range
address passed on the TEXTA, BUFFA, or level pointed to by and is not a pseudo Network Extension Facility (NEF) line
the LEVEL parameter. The base address of the WTOPC number or an AX.25 Logical End Point Identifier (LEID).
parameter list may also be bad.
System action: The entry control block (ECB) is ended. The
System action: The dump is issued. If the WTOPC call is entry was activated from an online console, the TPF system
from CP code, control returns to the caller, otherwise the notifies the operator.
E-type program is exited.
User response: None.
User response: The program should be inspected to verify
that addresses passed to the TEXTA, BUFFA, LEVEL, and SUB
parameters are set up correctly. If the base address of the 000085
WTOPC parameter list is bad, the code immediately preceding Program: CCCCP1(CLPA)
the WTOPC SVC should be inspected for possible corruption.
Error Message: INVALID MCS HEADER `chars IN INPUT
MESSAGE
000081
Where:
Program: Displayed on the console and in the dump.
chars
Error Message: BSC LMT ERROR The characters in the multiple console support (MCS)
Explanation: While trying to read an overflow record from header that are not in the correct format.
file, the message router had an error. This error can occur only Explanation: The MCS header on the input command from
on long messages that are to be transmitted on a binary the 3215 console is not in the correct format. When an
synchronous communication (BSC) line. automation platform is running in MCS mode, every
System action: The message is discarded. command is prefixed with an MCS header that contains the
grave accent character ( ` ) followed by two EBCDIC
User response: Review the system error dump to determine characters in the range of (0-9) or (A-F).
whether the file address was valid. If not, the problem was
probably caused by an application program issuing the System action: The command is rejected.
ROUTC macro for a message block that is not valid. The User response: Examine the format of the MCS header in the
routing control parameter list (RCPL) saved in the prime
System Errors 29
000094 • 0000A6
000094 0000A0–0000FF
Program: CCCCP1(CLYC)
Explanation: No core blocks were available for a read Program: Displayed on the console and in the dump.
operation on a low-speed line.
Error Message: PRC DOWN — LMT NOT ACTIVE
System action: Processing is ended.
Explanation: The prime computer room agent set (CRAS)
User response: None. console is down, idle, cycled down, or the long message
transmitter (LMT) is inactive. This is a catastrophic system
error.
000098
System action: The machine is stopped.
Program: CLUE
User response: Do the following:
Error Message: SLN sln FR ALL CCP MSG NOS IN USE 1. Correct the problem.
Where: 2. Restart.
Explanation: The communication network tables are not the SENDC K runs only in the BSS of the EP processor.
initialized.
System Errors 31
0000BA • 0000D2
System action: None. User response: Correct the application program causing the
dump.
User response: Review the system error dump to determine
the cause of the error.
0000D1
0000BA Program: CCNUCL(CICR)
Program: CCCCP3(CLQE), CCCCP3(CLQG) Error Message: One of the following errors occurred:
Error Message: None. v ATTAC — INVALID LEVEL SPECIFIED
v ATTAC — SPECIFIED LEVEL HOLDING BLOCK
Explanation: There is no core for CIOUC AI (SLC).
v ATTAC — NO BLOCKS DETACHED FROM ECB
System action: A system error is issued.
v ATTAC — NO BLOCKS DETACHED FROM LEVEL
User response: None. v ATTAC — SPECIFIED DECB HOLDING BLOCK
v ATTAC — NO BLOCKS DETACHED FROM DECB
0000BB | v ATTAC — DETAC BLOCK TABLE CORRUPTION
| DETECTED
Program: CCCCP3(CLQ)
| Explanation: An application program issued an ATTAC
Error Message: None. | macro incorrectly. See the error message text for more
Explanation: The line routing table search was unsuccessful. | information about the specific error.
System action: A system error is issued and the entry control System action: The ECB is ended. If the entry was from an
block (ECB) is exited. online console, notification is sent to the operator.
User response: None. Error Message: One of the following errors occurred:
v DETAC — INVALID LEVEL SPECIFIED
0000C0 v DETAC — SPECIFIED LEVEL NOT HOLDING BLOCK
v DETAC — SPECIFIED DECB NOT HOLDING BLOCK
Program: CCCCP3(CLQK)
Explanation: None.
Error Message: None.
Error Message: DETAC — MAXIMUM EXCEEDED FOR
Explanation: No entry control blocks (ECBs) in the TPF
LEVEL
system can use the program version; however, a nonzero
demand counter for the program version was detected. The Explanation: An application program tried to detach more
program allocation table (PAT) slot associated with the than 255 blocks from one ECB level.
program version was removed from the PAT.
System action: None.
System action: The TPF system flushes the virtual file access
(VFA) buffer. User response: Correct the application program causing the
dump.
User response: Review the system error dump to determine
the cause of the error. Error Message: DETAC — MAXIMUM EXCEEDED FOR
USER
Explanation: There was an attempt to detach more than 255
0000D0
blocks from the ECB for a specified user.
Program: CCNUCL(CICR, CHIM)
System action: None.
Error Message: None.
User response: Correct the application program causing the
Explanation: An application issued a CREEC or CRETC dump.
macro and specified an entry control block (ECB) data level or
data event control block (DECB) that does not hold a block.
Explanation: CAPB was scanning all entry control blocks Program: Displayed on the console and in the dump.
(ECBs) in the TPF system to detect any looping or hung Error Message: CRPA HAS OVERFLOWED
entries. CAPC was scanning the ECBs to display looping or
hung entries. Either program found an ECB address that is not Explanation: This SNAPC dump indicates that the core
valid or a block type returned from the centralized list resident program area overflowed during restart. This
handling routines. overflow indicates that not all the core resident programs fit
into the core resident program area. The data collection
System action: The entry is dumped and exited. counters for both the 24- and 31-bit core resident program
User response: Have your system programmer determine the areas are displayed in the dump. These counters indicate the
cause of the error in the ECB lists. number of programs that did not fit in storage.
System action: The program is exited. Note: The following messages have the same User Response.
User response: Have your system programmer to check the Error Message: ECB CANCELLED ON OPERATOR
SNAPC parameters and correct the error. REQUEST
0000D6 0000DA
System Errors 33
0000DB • 0000E6
User response: None. Program: Displayed on on the console and in the dump
(CVHD or CSNA).
Program: CCNUCL(CHIM, CICR) Explanation: CVHD is unable to find the line control
message editor table or CSNA is unable to find the SNA
Error Message: None. command table.
Explanation: An attempt was made to issue a CREM, CRED, The FIND error is not due to an I/O hardware error.
or CRET entry with a program file address of zero.
System action: The issuing program is exited.
System action: The entry is sent to exit.
User response: Do the following:
User response: Check the subject program for presence in the 1. Ensure that your system programmer checks the CE1SUD
system allocator and relink the program offline. data level 4 bytes in the dump to determine the cause of
the FIND error.
0000E5 2. Correct the problem.
Program: Displayed on the console and in the dump. Error Message: None.
Error Message: ERROR DURING TIME INITIATED Explanation: CVHD is unable to find the line control
KEYPOINTING message editor table (CVLU). The incoming non-SNA
communication command cannot be processed.
Explanation: An error occurred during time-initiated CP
keypoint processing. The error may be: User response: See the user response for the 0000E6 message.
Error Message: FIND ERROR WHEN RETRIEVING CSN0 1. Review the pilot tape input deck for application program
SNA MESSAGE TABLE I-stream GOA records that contain entries for I-stream
shared global records.
Explanation: CSNA is unable to find the SNA command
table (CSN0). The incoming SNA communication command 2. Move the entries into one or more GOA records for the
cannot be processed. main I-stream.
3. Recreate the pilot tape.
User response: See the user response for the 0000E6 message.
4. Reload the pilot tape to the TPF system.
0000E7
0000EA
Program: CICR
Program: CCNUCL (CTME)
Error Message: INVALID GLOBAL DIRECTORY ADDRESS
PASSED TO IGATC Error Message: STIMC REQUEST WITH INVALID TIME
INTERVAL
Explanation: The Global 1 or Global 3 directory address
passed to the IGATC macro was not valid. Explanation: CTME in CCNUCL detects a STIMC request
block with a zero or negative time interval value. Only
System action: None. positive values are valid.
User response: Review the directory address in question System action: If the request block post interrupt address
from the system error dump. This error occurs only when the indicates that the STIMC is invoked by CRETC with the
ERR= parameter of the IGATC macro was not coded. STATE=1052 option, an operational dump occurs and the ECB
Application programs using the IGATC macro should always exits. Otherwise, the STIMC is invoked by a CP routine and a
code this parameter. catastrophic system error occurs.
User response: Do the following: Error Message: UNAUTHORIZED USE OF FAST LINK
MACRO
1. Ensure that CSY2 is allocated and loaded to the TPF
system. Error Message: UNAUTHORIZED USE OF MACRO
2. Enter the ZSYSG ALTER or ZSYSG DISPLAY commands
Error Message: UNAUTHORIZED USE OF RECVC MACRO
again, as appropriate.
Error Message: UNAUTHORIZED USE OF GETCC
See TPF Operations for more information about the ZSYSG COMMON OPTION
commands.
Error Message: UNAUTHORIZED USE OF GETPC
LOADSET OPTION
0000E9
Error Message: UNAUTHORIZED USE OF RELPC
Program: GOG1 LOADSET OPTION
Error Message: T/C GLOBAL LOAD ERROR Error Message: UNAUTHORIZED USE OF GETPC SPECIAL
LOCK OPTION
Appended Message: I-STREAM SHARED GLOBAL
RECORD NOT ALLOWED ON NON-MAIN I-STREAM — Error Message: UNAUTHORIZED USE OF RELPC SPECIAL
REFERENCE R4 LOCK OPTION
Explanation: While processing GOA entries for an Explanation: An ECB-controlled program issued an SVC or
application program I-stream, global load found an entry fast-link macro and did not have the proper authorization (in
whose I-stream shared indicator was set to one. This is not the PAT) to issue that macro.
permitted. Any I-stream shared global records must be
System action: The ECB is ended.
included in the input to global load for the main I-stream only.
User response: Use the dump to determine the SVC or
Register 4 points to the global record that caused the error.
fast-link macro and the program that issued it.
Register 3 points to the failing GOA entry.
Use the program listing to determine which macro was issued.
System action: None.
If the program should be allowed to issue the macro, the PAT
User response: Do the following: table must be changed to allow the program to issue this
macro. Enter the ZAPAT command or run the allocator again
to create a new PAT table.
System Errors 35
0000EC • 0000F0
Program: CVZ5
0000EC
Error Message: rectype KPTR READ ERROR - CVZ5 RC nnn -
Program: CYYM
error
Error Message: DUPLICATION DISCREPANCY — RESTART
Where:
AREA DUPLICATION DOES NOT MATCH KEYPOINT
DUPLICATION — STATE CHANGE INHIBITED rectype
The record type for which the keypoint pointer record
Explanation: During restart, a discrepancy was found
(KPTR) was being read.
between the duplication factor of the restart area and that of
the TPF system keypoints. nnn
The return code from CVZ5.
System action: State change and keypointing are inhibited
for the subsystem currently going through restart. error
One of the following error descriptions:
User response: Ensure that the duplication factor for both the
restart area and the TPF system keypoints is the same. For UNINITIALIZED
example, if the restart area is fully duplicated, the TPF system The keypoint pointer record had not been
keypoints must also be fully duplicated. initialized.
FCTB MISMATCH
0000EE The extent table in the keypoint pointer record
does not match the record type definition in the
Program: CVRQ
FACE table (FCTB).
Error Message: ERROR FILING KEYPTS Explanation: Segment CVZ5 was unable to read the keypoint
Explanation: A file was issued and an error occurred. pointer record.
System action: None. System action: The copy to the system keypoint area of the
keypoints used for the IPL ends. State change is disabled and
User response: Check CE1SUD to determine the level where TPF system restart continues.
the file failed and the cause.
User response: Do one of the following:
Error Message: MCHR CONVERSION ERROR
v Determine why the keypoint pointer record is in error,
Explanation: An error occurred while trying to convert an correct the problem, and re-IPL the TPF system.
MCHR to FARF3 format. v Re-IPL the TPF system and respond to message CVZ60001A
System action: None. by entering the ZKPTR command with the REPLACE
parameter specified to file the rebuilt or updated keypoint
User response: Check the EBW008 message to determine the pointer record.
mmcchhr that failed.
Error Message: KEYPOINT RETRIEVAL ERROR See TPF Operations for more information about the ZKPTR
command.
Explanation: Find and Wait processing detected an error
while attempting to read a keypoint for keypoint copy.
0000EF
User response: Check CE1SUD of the ECB to determine the
level the FINDC failed on and the cause. Program: CVRN
Error Message: INVALID MESSAGE INDEX Error Message: FALLBACK KEYPTS COPIED - IPL PRIME
MOD
Explanation: The 0000EE system error was requested but the
requestor failed to initialize the message indicator that should Explanation: This system error dump occurs when you IPL
accompany the system error. the TPF system using keypoints from an area other than the
prime module. The keypoints are copied from the fallback
System action: Keypoint copy for the subsystem is aborted area to the prime module area.
and the subsystem’s state change is disabled.
System action: The TPF system enters a disabled wait state.
User response: The message indicator is located at label
WRKMSG in the workblock. Register 1 contains the address of User response: Perform a hardware IPL to use the
the workblock. Determine why the message indicator is not image-related records from the prime module.
valid.
Explanation: There was an error while filing the keypoint. Program: CVRN
System action: Keypointing is aborted and the TPF system Error Message: SMDT CHAIN CORRUPTED
state change is disabled. Explanation: An attempt to insert a dump keyword into the
User response: Do the following: selective memory dump table (SMDT) in CCCPSE failed. An
end-of-chain was found before the correct insertion point in
1. Check the CTL dump to determine why keypointing failed.
the linked list of SMDT entries was found. The keyword was
2. Re-IPL the TPF system. created by the ZIDOT command.
System action: The restart ECB is exited. The problem could be an error return from the FACE program
or a hardware error.
User response: The SMDT entry chain is initialized at the
end of CCCTIN. Determine which program corrupted the System action: The ZIDOT processing is exited. The ZIDOT
chain during restart and correct it. CREATE or ZIDOT DELETE request that initiated the file
retrieval remains in effect until the next TPF system IPL.
Error Message: FACE ERROR RETRIEVING #IBMM4
RECORDS FOR DOBT/SMDT User response: Do the following:
Explanation: A FACE error occurred during an attempt to 1. Review the system error dump to determine the cause of
access the #IBMM4 record type, record ID X'FF1C0000'. the error.
2. Correct the error.
System action: Control returns to the restart scheduler and
restart is continued.
0000F1
User response: Ensure that the proper records were allocated
for use by the ZIDOT command. Program: CVRN
Error Message: FIND ERROR RETRIEVING #IBMM4 Error Message: SMDT KEYWORD COULD NOT BE
RECORDS FOR DOBT/SMDT LOCATED IN CCCPSE — keyword
Explanation: A hardware error occurred during an attempt to Where:
retrieve one of the ZIDOT file records.
keyword
System action: State change is disabled for all subsystems The name of the dump keyword.
and restart is continued.
Explanation: A ZIDOT INCLUDE ALL or ZIDOT OMIT ALL
User response: Do the following: command was entered for the dump keyword referenced in
1. Review the system error dump to determine the cause of the message. However, that keyword could not be found in
the error. the selective memory dump table (SMDT) in CCCPSE during
restart.
2. Correct the error.
System action: The SMDT entry on file is deactivated and
Program: CVZL
processing is continued.
Error Message: UNABLE TO WRITE DOBT RECORD TO
User response: None.
FILE
Error Message: INSUFFICIENT NUMBER OF DUMMY
Explanation: The ZIDOT command processor found an error
KEYWORD ENTRIES RESERVED IN THE IDATB MACRO
when attempting to write one of the DOBT records to disk.
The problem could be: Explanation: No dummy SMDT entry is available to contain
v An error returned from the file address compute program a dump keyword previously created by a ZIDOT CREATE
(FACE). request. This indicates that the number of dummy entries in
the SMDT was reduced since the last IPL of the TPF system.
v A hardware error.
System action: State change is disabled for all subsystems
System action: The ZIDOT processing is exited. The ZIDOT
and restart continues.
request remains in effect until the next TPF system IPL occurs.
User response: Allocate more dummy entries in the SMD,
User response: Do the following:
and reassemble and reload CCCPSE, CCCTIN, CCUEXT,
1. Review the system error dump to determine the cause of restart program CVRN, and the ZIDOT programs CVZI, CVZJ,
the error. CVZL, and CVZM.
2. Correct the error.
Error Message: INSUFFICIENT SPACE ON FILE FOR 0000F2
ADDITIONAL SMDT ENTRIES
Program: CYYA
Explanation: An attempt was made to save an SMDT entry
Error Message: SON — FILE KEYPOINT ERROR
to disk for a dump keyword just created by the ZIDOT
CREATE request or just modified by the ZIDOT Appended Message: One of the following:
INCLUDE/OMIT ALL request. However, no space is available v FILE ADDRESS NOT FOUND
in the SMDT file record. v INVALID FILE ADDRESS
v ILLEGAL MODULE NUMBER
System action: The ZIDOT processing is exited.
v PRIME & DUP MODS OFFLINE
User response: Delete some created keywords or clear some v WAIT ERROR
dump overrides containing keywords included in or omitted v PRIME OR DUP FILE FAILED
from all dumps.
Explanation: There was a file keypoint error. This error may
Error Message: UNABLE TO RETRIEVE SMDT RECORD or may not be catastrophic.
FROM DISK
System action: This error is catastrophic in the basic
Explanation: The ZIDOT command processing found an subsystem (BSS) when the filing of the keypoint was
error when attempting to retrieve the SMDT record containing unsuccessful for both the prime and duplicate modules. If the
keywords created by one or more ZIDOT CREATE requests. keypoint cannot be filed to one module, but the file is
System Errors 37
0000F3 • 0000F6
successful to the other, the error is issued for information only User response: Determine why the event name already
and processing is continued. exists.
The ECB exits when it is not a BSS DBI and the file was Appended Message: ZMCPY LOGIC ERROR, UNABLE TO
unsuccessful for both the prime and duplicate modules. As in FIND CREATED EVENT
the BSS, processing will continue when the keypoint is filed
Explanation: The TPF system tried to post to or wait on an
successfully to either the prime or duplicate module.
internal event it created previously but the event name was
User response: Do the following: not found.
1. Check the file address reference word in error. System action: If it occurs at EOJ for COPY, the TPF system
2. Review the ECB SUD flag byte for that level and is halted and a re-IPL is forced. Otherwise, COPY is aborted.
determine the reason for failure.
User response: None.
Appended Message: ZMCPY LOGIC ERROR, EVENT
0000F3
ERROR AT COPY EOJ
Program: Displayed on the console and in the dump.
Explanation: The TPF system tried to post to or wait on an
Error Message: FILE COPY — ERROR FILING CTK6 internal event it created previously but could not because of
an event error at the end of the copy function.
Appended Message: ERROR WRITING CTK6
System action: The TPF system halts and an IPL is forced.
Explanation: An error occurred while trying to file the
updated copy of keypoint 6. This results in the keypoint not User response: None.
reflecting the new module status and possible lock movement.
Appended Message: ZMCPY TIME OUT AWAITING
System action: Processing is continued and the TPF system PROCESSORS RESPONSE
tries to refile keypoint 6 later.
Explanation: Another processor in a loosely coupled complex
User response: Do the following: did not respond within a specified time period.
1. Review the ECB SUD flag byte for the data level 9. System action: If it occurs at EOJ for COPY, the TPF system
2. Determine the reason for the failure. halts and a re-IPL is forced.
Error Message: FILE COPY — ERROR IN LC PROCESSING Program: Displayed on the console and in the dump.
Appended Message: INVALID FUNCTION CODE Error Message: DASD FILE COPY-I/O ERROR
The EBW000 must contain a valid function code, for example, User response: Check that the copy pack is formatted
0, 4, 8, 12, 16, or 20. correctly and retry the FDCTC macro.
Program: CCNUCL(CAPT) System action: Return to the calling program with the
appropriate error indicators set.
Error Message: UNSUPPORTED SVC ISSUED
User response: Establish which keypoint is affected from the
Explanation: An ECB-controlled program issued an SVC that dump and determine whether a physical problem exists at the
is not supported by the TPF control program or the function address allocated to this keypoint. Any fixes may require a
requested by the SVC was not TPF system-generated. load of the affected keypoint.
System action: The ECB is ended.
0000FC
User response: Use the SNAPC dump to determine the SVC
code that was issued and which program issued it. Use the Program: CCSONA(CEFH)
program listing to determine which macro (if any) contained
the SVC. Ensure the services requested by the macro are Error Message: ECB ATTEMPTS TO HOLD 256 RECORDS
supported by the TPF control program (CP) being used. Explanation: An entry tried to hold a record when the record
In the SNAPC dump, the SVC old PSW contains addresses hold count in CE1HLD was equal to 255 or X'FF', which is the
from which the SVC was issued. The IBMSVC and USRSVC maximum value that can be stored in that one byte field.
macros contain the valid SVC codes. System action: The ECB is ended.
User response: Do the following:
0000F9
1. Using the macro trace in the dump, find the programs in
Program: CCNUCL(CICR) the TPF system that issue macros to hold a record (FINHC,
FIWHC).
Error Message: None.
2. Determine which programs caused the entry to try to hold
Explanation: The address requested through the CINFC more than 255 records simultaneously.
macro is not defined in this configuration. 3. Modify those programs so that it is impossible for an entry
System action: The program is exited. to hold more than 255 records at the same time.
Error Message: None. Explanation: An error occurred in DRD5 in the routine that
processes the file-resident record ID attribute table (RIAT). The
Explanation: A read error occurred during a FINWC request error occurred in either a FNSPC or FLSPC macro, or when
preventing a listing of active TPF system, user, or pool utilities trying to retrieve the correct RIAT record into core. The RIAT
following a ZCYCL request or during a re-IPL. Cycling is not error processing routine displays the specific error to the
allowed while lethal utilities are running because: console and the RIAT FIND/FILE ERROR message appears in
v The integrity of the TPF system may be damaged the dump.
v The data generated by the utility would be incorrect. System action: Module DRD5 issues a system error and is
exited.
System action: Processing is continued with the computer
room agent set (CRAS) console and a utility names unknown User response: Do the following:
message is issued. ZCYCL requests are not honored unless this 1. Review the system error dump.
message was issued immediately following an IPL. Following
an IPL, all utility indicators are turned off so that ZCYCL 2. Take the appropriate action.
requests are allowed.
System Errors 39
0000FE • 000111
000109
0000FF
Program: CCCCP1(CLYE)
Program: Displayed on the console and in the dump.
Error Message: SIOSC ERROR — CONDITION CODE 1
Error Message: NO ERROR — DUMPC MACRO ISSUED
RECEIVED
Explanation: DUMPC macro service routine.
Explanation: An SIOSC was issued and a condition code (1)
System action: Return to NSI. that is not valid was received from CIO. The SIOSC macro
processor in IPLB segment CCIO should only be returning a
User response: None. condition code of:
v 0 (request accepted)
000100–0001FF v 2 (SDA already active)
v 3 (SDA is not valid).
Program: CCSNA1(CS01, CS07, CSX4) User response: The problem may be a logic error in CIO. See
your system programmer to check the problem.
Error Message: CONDITION CODE 1 RETURN TO SIOSC
Explanation: An SIOSC macro was issued and a condition
code 1 that was not valid was received from CIO. The SIOSC 00010A
macro processor in IPLB segment CCIO should only be Program: CCNUCL(CICR)
returning a condition code of:
v 0 (request accepted) Error Message: INVALID CIOSC FUNCTION CODE
v 2 (SDA already active) Explanation: The CIOSC macro that was processing was
v 3 (SDA is not valid). given control with a CIOSC function code that is not valid.
System action: A catastrophic system error is issued. The TPF System action: The entry control block (ECB) is ended.
system performs an IPL. User response: Have your system programmer review the
User response: See your system programmer to check the system error dump.
problem. The problem may be a logic error in CIO.
000110
000108 Program: Displayed on the console and in the dump.
Program: CCSNA1(CS01,CS07,CSX4,CS0G), CC3705 (CRNM, Error Message: RDLR RETRIEVAL ERROR
CRNI)
Explanation: An error occurred during an attempt to FIND
Error Message: One of the following: and HOLD the root dynamic load record (RDLR).
v CONDITION CODE 2 RETURN TO SIOSC
v CONDITION CODE 2 RETURN TO SIOSC ON XID System action: A system error dump is taken and processing
is exited.
Explanation: CCSNA1 or CC3705 issued the SIOSC macro
but the macro was already issued. User response: Review the system error dump to determine
the cause of the FIND error.
System action: The lost terminal interface routine is
activated, which deactivates the device. If CS0G issued this
message, a catastrophic system error occurs. 000111
User response: See your system programmer to check the Program: CDL6
problem. The problem may be a logic error in CCSNA1.
Error Message: ERROR READING OSTG TAPE
Error Message: One of the following:
Explanation: An error occurred during an attempt to read
v CC3 TO SIOSC — SDA NOT MOUNTED
from the OSTG tape.
v CC3 TO SIOSC — SDA nnnn NOT MOUNTED
System action: A system error dump is issued, the RRT 1. Review the system error dump to determine the cause of
section being loaded is marked not in use, and processing is the error. The load operation must start from the beginning
exited. once the GDS error is corrected.
User response: Review the system error dump to determine 2. Enter the ZNOPL Load command to restart the load
the cause of the error. You can run the load operation again. operation.
000112 000116
Error Message: NCB RETRIEVAL ERROR Error Message: RID RETRIEVAL ERROR.
Explanation: An error occurred during an attempt to retrieve Explanation: An error occurred during an attempt to find an
the NCB of a resource. available resource identifier (RID) to assign to an added
resource.
System action: A system error dump is issued. Processing
continues with the assumption that the resource to be System action: A system error dump is issued, fallback
interrogated is active. required is indicated, and processing is exited.
User response: Review the system error dump to determine User response: Do the following:
the cause of the error. 1. Review the system error dump to determine the cause of
the error.
Error Message: ERROR READING GDS Program: CBI0 — Identify and Directory Maintenance
Explanation: An error occurred while calculating the file Error Message: RFND CORRUPTION HAS OCCURRED
address of the input general data set (GDS) or reading a Explanation: The count of available entries in the resident
record from the GDS. function name table (RFND) does not match the number of
System action: A system error dump is issued, the RRT entries available. The DSECT name for the RFND is DCTRFN.
section being loaded is marked not in use, and processing is System action: A catastrophic system error is issued. The TPF
exited. system is re-IPLed. The re-IPL process clears this condition.
User response: Do the following: User response: None.
System Errors 41
000139 • 000142
Explanation: Path activation notification or directory update System action: The ECB is exited.
notification was not specified in EBX004. User response: Do the following:
System action: The ECB is exited. 1. Review the DNT/PAN.
User response: Correct the calling program error. 2. Increase the DNT/PAN table or update the Multi-Processor
Interconnect Facility (MPIF) users not to request as many
concurrent notification exits.
00013C
Program: CBRS, CBR0 — MPIF Restart 000142
Error Message: EVENT NOT FOUND Program: CBB0, CBB1
Explanation: The event created by CBRS was not found Error Message: NO PACING CREDITS AVAILABLE FOR
either by CBR0 trying to post it or by CBRS trying to wait on BROADCAST FUNCTION
it.
Explanation: Broadcast messages are sent across
System action: A catastrophic system error is issued. Multi-Processor Interconnect Facility (MPIF) connections that
do not use pacing. A MPIFC SEND, however, indicated no
User response: The problem may be a logic error. See your
available pacing credits for the MPIF connection. Storage
system programmer to check the error.
corruption is assumed.
System action: A catastrophic system error is issued. The TPF
00013E
system is re-IPLed.
Program: CBX0 — MPIF Canned Message Driver
User response: Have your system programmer review the
Error Message: INVALID CANNED MESSAGE NUMBER system error dump for possible storage corruption.
PASSED TO CBX0.
Explanation: A canned message number that is not valid was
passed to CBX0 by a calling program.
System Errors 43
00014F • 000182
00014F 000157
Program: CBH1 — Directory Management Program: CBR2 — MPIF Keypoint Recovery
User response: Review the system error dump to determine User response: None.
why there are no core blocks available.
000181
000156
Program: Displayed on the console and in the dump.
Program: CBP1, CBG2, CBR2
Error Message: None.
Error Message: MPIF KEYPOINT E DATA CANNOT BE
Explanation: PKST Init — FINW error CCP Table
RECONSTRUCTED
Initialization
Explanation: The dump is issued after previous messages
System action: Skip this record.
from CBR2 were issued to further identify the problems.
User response: None.
System action: MPIF restart is aborted. Multi-Processor
Interconnect Facility (MPIF) will not be operational. The TPF
system will reach 1052 state with state change disabled 000182
User response: The messages from CBR2 and the dump must Program: Displayed on the console and in the dump.
be checked and the cause of the error corrected.
Error Message: CWAL FACE RETURN ERR FOR SCK
Explanation: A SCK FIWHC error occurred. Explanation: There was a file address compute program
(FACE) FIND error while locating a SCK record (or AI Link
System action: The record is skipped. Error Counts Record — CVMA, CWCL only).
User response: The halfword at EBW022 of the ECB in the System action: A system error is issued with a return.
dump contains the ordinal number in error.
User response: None.
0001A0
0001C6
Program: CCCCP1(CLWA)
Program: CVMA
Error Message: None.
Error Message: INVALID SCK
Explanation: A communication keypoint error was detected
at macro time. Explanation: An SCK record that is not valid was found.
System action: The program is exited. System action: A system error is issued with a return.
0001A1 0001C7
Explanation: A communication keypoint error was detected Explanation: The content of the AI Link Error Counts Record
at update time. was found to be incorrect. The content of this record may not
correspond with the TPF system configuration.
System action: The request is ignored and the program is
continued. System action: A system error is issued with a return.
User response: None. System action: The address is decoded and the dump is
issued to provide information about the condition.
User response: Use the following information that is
provided in the dump to determine what file address was not
in the current dispense format:
System Errors 45
0001D0 • 0001E1
Program: CCURSP(CMUE)
0001D6
Error Message: U/R INVALID ACTIVE IOCB
Program: CCURSP(CMUC)
Explanation: The IOCB address returned is not the active
one. Error Message: U/R $GSVAC CONVERSION ERROR
System action: A catastrophic system error is issued. Explanation: There was an error return taken on $GSVAC
while attempting to convert an ECB virtual memory (EVM)
User response: Review the system error dump and the address to a system virtual address (SVA).
device queue anchored in the unit record status table to
determine what the active unit record device should be. System action: The U/R macro request is ended.
User response: Review the system error dump to determine
0001D2 why the ECB virtual address (EVA) was unable to be
successfully converted to a system virtual address (SVA).
Program: CCURSP(CMUE)
Error Message: U/R I/O PROGRAM ERROR 0001D7
Explanation: An I/O program error (any of bits 40, 41, 42, 43, Program: CCURSP(CMUC)
and 47 of CSW set) occurred for Unit Record (U/R) I/O
macros other than the URCTC. Error Message: URCTC — INVALID USER CCW
System action: The entry control block (ECB) is ended. User response: Review the system error dump and CCW
translation work area information to determine why the CCW
User response: Review the system error dump and I/O trace translator was unable to translate the user channel program
to determine why the channel program ended in error. successfully.
Error Message: TRC REQST I/O ERROR User response: Verify the parameter setup in the call to CSSB
for the FIND function. If the error is due to an I/O problem,
Explanation: A hardware error or some unusual condition see your system programmer or your IBM service
occurred during the execution of a channel program addressed representative.
to the 3705 controller over its native subchannel.
Error Message: MVT FILE ERROR
System action: After the dump is taken, control is returned
to the interrupt handler. Explanation: This message is issued when an error occurs
while CSSB is attempting to file the module verification table
User response: None. (MVT). This can be due to:
v An I/O error
System Errors 47
0001F1 • 0001F2
v An incorrect parameter setup in the call to CSSB for the Explanation: The RCSSC macro service routine detected a
FILE function. zero RCS SSID value or an SSST entry address that is not
valid in the IDSCS0 parameter list.
System action: A system error dump is issued and
processing continues. System action: If the error is reported through the RCSSC
macro, return is made to the caller with the appropriate return
User response: Verify the parameter setup in the call to CSSB code set in the RCSSC macro parameter list (IDSCS0). If the
for the FILE function. If the error is due to an I/O problem, error is reported through the callers of the RCSSC macro,
see your system programmer or your IBM service processing is ended.
representative.
User response: See your IBM service representative to help
Error Message: FACS ERROR ON MVT PROCESSING you determine the cause of the error.
Explanation: This message is issued when an error occurs
while CSSB is computing the MVT file address.
0001F2
System action: A system error dump is issued and
Program: Displayed on the console and in the dump.
processing continues.
User response: Verify the parameter setup in the call to CSSB Note: The following messages have the same System Action
for the FILE/FIND functions on the MVT. and User Response.
Error Message: INVALID RELATIVE MODULE NUMBER Error Message: RETURN CODE n ON SSST HEADER
RETRIEVAL – RESTART ABORTED
Explanation: This message is issued when the relative
module number used during a FILE or FIND function is not Explanation: The RCS restart segment CSS0 found an error
valid. while trying to retrieve the record cache subsystem status
table (SSST) header record from file. See the RCSSC parameter
System action: A system error dump is issued and
list for the meaning of the return code n.
processing continues.
Error Message: RETURN CODE n ON FILE OF SSST
User response: Verify the parameter setup in the call to CSSB
HEADER – RESTART ABORTED
for the FILE/FIND functions on the MVT.
Explanation: The RCS restart segment CSS0 found an error
Error Message: INVALID DATA LEVEL
while trying to file the record cache subsystem status table
Explanation: This message is issued when the data level used (SSST) header record. See the RCSSC parameter list for the
during a FILE or FIND function is not valid. meaning of the return code n.
System action: A system error dump is issued and Error Message: IEF ERROR — EVNTC DUPNAM OR EVINC
processing continues. NFOUND BRANCH TAKEN - RESTART ABORTED
User response: Verify the parameter setup in the call to CSSB Explanation: RCS restart segment CSS1 passed an event
for the FILE/FIND functions on the MVT. name that is not valid on the EVNTC or EVINC marco
request.
Error Message: RCSSC RETRIEVAL ERROR Error Message: RETURN CODE n ON SSST ENTRY SCAN
— RESTART ABORTED
Explanation: An error occurred while the ZBUFC command
routines attempted to retrieve the record cache subsystem Explanation: The RCS restart segment CSS1 found an error
status table (SSST) header or entry record. while trying to scan record cache subsystem status table
(SSST) structure. See the RCSSC parameter list for the meaning
Error Message: RCS MOUNT — RCSSC RETRIEVAL ERROR of the return code n.
Explanation: An error occurred while the DASD mount Error Message: UNABLE TO RETRIEVE SSST HEADER
routine CPAB attempted to retrieve the record cache
subsystem status table (SSST) header record. Explanation: RCS service routine CSS2, CSS5, CSS6, or CCS7
found an error attempting to retrieve the record cache
Error Message: RCS DISMOUNT — RCSSC RETRIEVAL subsystem status table (SSST) header record from file.
ERROR
Error Message: UNABLE TO LOCATE SSST ENTRY IN
Explanation: An error occurred while the DASD dismount MEMORY
routine CPAI attempted to retrieve the record cache subsystem
status table (SSST) header or entry record. Explanation: The RCS service routine CSS2 found an
unrecoverable error while trying to locate an SSST entry in
Error Message: BAD PARAMETER LIST. NO SSID PASSED memory.
OR POINTER TO CURRENT SSID CORRUPTED DURING
SEQ SEARCH. Error Message: IEF ERROR — POSTC NFOUND BRANCH
TAKEN AGAINST EVENT NAME SUPPLIED BY CALLING Explanation: The RCS service routine CSS6 found an error
PROGRAM while trying to scan the record cache subsystem status table
(SSST) structure.
Explanation: The RCS service routine CSS2 passed an event
name that is not valid as part of a POSTC macro request. Error Message: ERROR DURING MVT VALIDATION —
RCSSC ERROR ON SSST ENTRY LOOKUP
Error Message: PERMANENT I/O ERROR ON SENSE
SUBSYSTEM STATUS FOR DEVICE dddd RCS SSID ssss Explanation: The RCS service routine CSS6 found an error
while trying to access the record cache subsystem status table
Where:
(SSST) during MVT validation request processing.
dddd
Error Message: UNABLE TO ACTIVATE CACHING FOR
The device name.
DEVICE dddd RCS SSID ssss
ssss The RCS device name.
Explanation: The RCS service routine CSS7 encountered an
Explanation: The RCS service routine CSS2 found an I/O I/O error while trying to activate caching for device dddd
error while trying to read the status information for an RCS attached to RCS subsystem ID ssss.
device. If this was the first time the device was sensed by the
Error Message: UNABLE TO ACTIVATE DASD FAST WRITE
TPF system, the device is taken offline since the TPF system is
FOR DEVICE dddd RCS SSID ssss
unable to determine required RCS control information.
Explanation: The RCS service routine CSS7 found an I/O
Error Message: ERROR ATTEMPTING TO UPDATE SSST
error while trying to activate DASD fast write for device dddd
ENTRY
attached to RCS subsystem ID ssss.
Explanation: RCS service routine CSS2 found an error
Error Message: UNABLE TO ALLOW ECKD RECORD
attempting to update the record cache subsystem status table
MODE FOR DEVICE dddd RCS SSID ssss
(SSST) entry record on file.
Explanation: The RCS service routine CSS7 found an I/O
Error Message: STATUS COMPARE ERROR — INVALID
error attempting to activate record mode for device dddd
STATUS OR STATUS LIST OVERFLOW
attached to RCS subsystem ID ssss.
Explanation: RCS service routine CSS2 found an error
Error Message: UNABLE TO UPDATE SLOT ALLOCATIONS
attempting to determine the RCS subsystem/device status
ON RCS SSID ssss - ERROR ON “MAKE SUBSYSTEM
difference as requested by the RCS state change routine CYEA.
STORAGE UNAVAILABLE”
Error Message: INVALID BRANCH VECTOR IN R3
Explanation: The RCS service routine CSS7 found an I/O
Explanation: A service request vector that is not valid was error on the make subsystem storage unavailable request
passed to one of the following: while trying to update the cache allocations for RCS
subsystem ID ssss.
v RCS subsystem query service CSS5
v RCS hardware validation service CSS6 Error Message: UNABLE TO UPDATE SLOT ALLOCATIONS
ON RCS SSID ssss - ERROR ON “SET CACHE SLOT
v RSC hardware initialization service CSS7.
ALLOCATION VALUES”
Error Message: UNABLE TO RETRIEVE SSST ENTRY
Explanation: The RCS service routine CSS7 found an error on
Explanation: An error occurred while the record cache the Set Cache Slot Allocation Values request while attempting
subsystem (RCS) service routine CSS5 attempted to retrieve a to update the cache allocations for RSC subsystem ID ssss
record cache subsystem status table (SSST) entry record.
Error Message: ERROR UPDATING SLOT ALLOCATIONS
Error Message: PERMANENT I/O ERROR ON PERFORM ON RCS SSID ssss - UNABLE TO MAKE SUBSYSTEM
SUBSYSTEM FUNCTION FOR DEVICE dddd RCS SSID ssss STORAGE AVAILABLE
Explanation: The RCS service routine CSS5 found an I/O Explanation: The RCS service routine CSS7 found an I/O
error while trying to read the cache fast write ID (CFWID) or error on the Make Subsystem Storage Available request while
cache allocation data from RCS subsystem ssss addresses by trying to update the cache allocations for RCS subsystem ID
device dddd. ssss.
Error Message: UNABLE TO LOCATE SSST ENTRY IN Error Message: UNABLE TO ACTIVATE CACHE FAST
MAIN STORAGE WRITE ON RCS SSID ssss DUE TO SUBSYSTEM STORAGE
MALFUNCTION
Explanation: RCS service routine CSS6 encountered an
unrecoverable error while trying to locate an SSST entry in Explanation: The RCS service routine CSS7 found an I/O
memory. error while trying to activate cache fast write for RCS
subsystem ID ssss
Error Message: CSS6SCAN ERROR — RETURN AREA
OVERFLOW Error Message: UNABLE TO ACTIVATE NONVOLATILE
STORAGE ON RCS SSID ssss DUE TO NONVOLATILE
Explanation: The RCS service routine CSS6 determined that CACHE MALFUNCTION
no room was left to return the message ID information in
order to report down-level RCS subsystem or device status Explanation: The RCS service routine CSS7 found an I/O
conditions. error while trying to activate nonvolatile storage for RCS
subsystem ID ssss
Error Message: ERROR OCCURRED DURING SEQUENTIAL
PROCESSING OF SSST ENTRIES IN MAIN STORAGE Error Message: UNABLE TO MAKE SUBSYSTEM
System Errors 49
0001F3 • 0001F5
Error Message: UNABLE TO ACCESS CFWID TABLE Explanation: A ZMCPY function was running but there was
RECORDS - CFWID PROCESSING ABANDONED an error retrieving keypoint V.
Explanation: A file address compute (FACE) error or System action: The ZMCPY function that was running fails.
irrecoverable I/O error occurred while record cache subsystem
User response: See your IBM service representative to help
(RCS) service routine CSS5 attempted to read or write the
you determine the cause of the error.
cache fast-write ID (CFWID) table from file. No updates can
be made to reflect changes in the subsystem ID (SSID) CFWID See TPF Operations for more information about the ZMCPY
information in the complex. commands.
The contents of register 15 (R15) indicates whether the
problem is a FACE error or an I/O error, as follows: 0001F5
v If R15 is 0, the problem is a FACE error.
Program: CYPO, CYPT
v If R15 is not 0, the problem is an I/O error.
Error Message: None.
In addition, R3 contains the #IBMMP4 ordinal number.
Explanation: A ZMCPY function was running but the file
System action: CFWID table processing stops and an error status table (FSTB) did not contain the expected information.
return code is posted in the RCS common parameter list
(IDSCS1). System action: The ZMCPY function fails.
User response: Do one of the following: User response: See your IBM service representative to help
you determine the cause of the error.
v If a FACE error occurred, ensure that the required #IBMMP4
ordinals are defined for the local processor with the FACE See TPF Operations for more information about the ZMCPY
program. commands.
v If an I/O error occurred, determine the cause of the I/O
error and correct the problem.
000200–0002FF
000231
00022F
Program: Displayed on console and in dump.
Program: CTKS
Error Message: MDBF ID NOT AVAILABLE
Error Message: None.
Explanation: The multiple database function (MDBF) ID
Explanation: The TPF system forced a re-IPL as part of provided to the CROSC service routine is not available. Either
restart in the loosely coupled complex. the subsystem with that ID was not included in the last IPL or
System action: The TPF system re-IPLs. it was made inactive through the PSMS package.
User response: None. System action: Processing is ended when the entry is
controlled by an ECB type program. Otherwise, an
irrecoverable system error is issued.
000230
User response: Review the system error dump because one
Program: Displayed on console and in dump. of the following errors occurred:
Error Message: INVALID MDBF ID v The subsystem attribute table or the subsystem user table is
corrupted
Explanation: In the half-word subsystem or subsystem user
ID, the first byte is not the complement of the second byte. v The ID specified is incorrect.
Explanation: In the half-word subsystem or subsystem user Check the program that issued the CROSC macro to get a file
ID (SSU), the first byte is not the complement of the second pool address.
byte.
System action: If the tape is a real-time tape, the ECB and 000233
tape status table names are repaired and normal processing is
performed. If the tape is a general tape, the ECB is exited. Program: Displayed on console and in dump.
User response: Review the system error dump because one Error Message: CROSC FUNCTION NOT DEFINED
of the following errors occurred:
Explanation: A CROSC macro is issued but the data required
v The ID specified is corrupted to perform the function is not defined.
v The tape status table entry is corrupted
System action: Processing is ended when the entry is
v A logic error exists in UATBC processing. controlled by an ECB type program. Otherwise, an
Program: COTG irrecoverable system error is issued.
Error Message: INVALID SSU NAME IN TAPE STATUS User response: Review the system error dump.
TABLE Either the CROSC macro call does not include data for the
Explanation: In the half-word subsystem or subsystem user function definition or the function is not defined.
ID, the first byte is not the complement of the second byte.
System Errors 51
000234 • 000292
000234 000241
Program: Displayed on console and in dump. Program: Displayed on console and in dump.
Error Message: MISCELLANEOUS ERROR FROM CROSC Error Message: UATBC – MDBF ID EXCEEDED
Explanation: The CROSC service routine found an error that Explanation: If IDLOC=(E was specified) the
should not occur. CE1DBI/CE1SSU ordinal number exceeds the number of
SS/SSUs included in the last IPL. If IDLOC=(R was specified),
System action: Processing is ended when the entry is an ECB the SS or SSU ordinal number provided in the specified
controlled programs. Otherwise, an irrecoverable system error
register exceeds the number of SS/SSUs included in the last
is issued.
IPL.
User response: Review the system error dump. System action: Processing is ended when the entry is ECB
In the dump, R0 contains an error code that can be found in controlled. Otherwise, an irrecoverable system error is issued.
the CRSMERTB table within the CCCSAS CSECT. In this table
User response: An EXCD parameter may be coded on the
each error code has an associated message that identifies the UATBC macro call to specify a unique error recovery routine.
exact nature of the error.
The subsystem attribute table or subsystem user table is
corrupted or a program issuing the UATBC macro call
000235 computed an ID that is not valid. The number of SS/SSUs
Program: Displayed on console and in dump. included in the last IPL can be obtained from the subsystem
attribute table or subsystem user table, which may be found in
Error Message: CROSC REG SAVE AREA IN USE the dump at labels SSA and SSU, respectively.
Explanation: The CROSC macro was issued from a C-type
segment when the CROSC CP register save area was in use. 000290
This error occurs when the CROSC macro service routine is
interrupted while servicing a CP CROSC macro request, and a Program: CCSICF(CNP0)
CROSC macro is again issued by a CP segment before the Error Message: One of the following:
original CROSC service is completed. v SIPC LENGTH INVALID FOR DATA AREA 1
System action: An irrecoverable system error is issued. v SIPC LENGTH INVALID FOR DATA AREA 2
User response: Verify that an interrupt handler routine or an Explanation: The macro validation function detected a length
interrupt driven CP segment is not issuing a CROSC macro for data area 1 or data area 2 that is not valid.
call. System action: The E-type program that issued the SIPC
The CROSC CP register save area is located at label request is ended.
CROSSAVB in the CCCSAS CSECT. The address from where User response: Modify the SI3LEN1 or SI3LEN2 field in the
the first CROSC was issued is 4 bytes before the address SIPC user control area (SI3CT) to a correct length specification.
stored in the first fullword of this save area.
000291
000240
Program: CCSICF(CNP0)
Program: Displayed on console and in dump.
Error Message: SIPC CORE BLOCK IS NOT VALID/HELD
Error Message: UATBC REG SAVE AREA IN USE
FOR DATA AREA 2
Explanation: The UATBC macro was issued from a C-type Explanation: The macro validation function detected a
segment when the UATBC CP register save area was in use. nonzero length for data area 2 without a main storage block
This error occurs when the UATBC Macro Service Routine is validly held on the specified (or default) data level.
interrupted while servicing a CP UATBC macro request, and a
UATBC macro is again issued by a CP segment before the System action: The E-type program that issued the SIPC
original CROSC service is completed. macro is ended.
System action: An irrecoverable system error is issued. User response: Do one of the following:
User response: Verify that an interrupt handler routine or an v Modifiy the SI3LEN2 field in the SIPC user control area
interrupt driven CP segment is not issuing a UATBC macro (SI3CT) to a zero value or
call. v Specify the correct data level on which the storage block is
held
The UATBC CP register save area is located at label
CUBCPRGS in the CCCSAS CSECT. The address from where v Obtain a storage block for a specified (or default) level.
the first UATBC was issued is 4 bytes before the address
stored in the first fullword of this save area. 000292
Program: CCSICF(CNP0)
Error Message: SIPC RETURN FLAG(S) SET AND RETURN
NAME NOT CODED
Explanation: The macro validation function detected a Explanation: A SIPCC macro was issued with the LIST
nonzero setting for the return request flags in the user control parameter specified, but the address of the list area is zero.
area without a return program name being specified.
System action: The issuing entry control block (ECB) exits.
System action: The E-type program that issued the SIPCC
User response: Determine why the address of the list area is
macro is ended.
zero and correct the error.
User response: Do one of the following:
See TPF System Macros for more information about the SIPCC
v Set the SI3CT flags (SI3XMIT or SI3XERR) to 0 macro.
v Specify a program name for the SIPCC macro
RETURN=parameter.
000297
Error Message: DATA RETURN ERROR, CONTOK PASSED Appended Message: SIPC DESTINATION NOT VALID
INSTEAD OF UCTOK Explanation: A SIPCC macro was issued with a single
Explanation: The IPC error exit routine was invoked to processor destination specified, but the processor ordinal
return data that could not be transmitted because a connection number is not in the range 0 to 31.
was broken. The routine detected that it was passed a This error may indicate that the application has not been
CONTOK instead of a UCTOK (ICDB address). converted to use processor ordinal number values for
System action: The data blocks are released and the IPC interprocessor communications (IPC) processor destinations.
error exit routine is exited. System action: The issuing entry control block (ECB) exits.
User response: Have your system programmer review the User response: Determine why the processor ordinal number
system error dump. is not in range 0 to 31 and correct the ordinal number. If
necessary, convert the application to use ordinal number
values for IPC processor destinations.
000294
See TPF System Macros for more information about the SIPCC
Program: CCSICF(CNP6)
macro.
Error Message: CNP6 — CEBIC ERROR WITH SSUID FOR
SIPC ITEM RETD/RECD
000298
Explanation: CNP6 tried to initialize an entry control block
Program: C277
(ECB) for the program specified in the PGM or RETURN
parameters of the SIPCC macro. CEBIC rejected the SSU ID Error Message: TARGET(TPF) SIPCC FUNCTION ERROR
obtained from the CE1SSU field of the SIPCC requestor’s ECB.
Appended Message: TARGET(TPF) SIPCC FUNCTION NOT
System action: The ECB initialization processing is ended. SUPPORTED
User response: Ensure that the specified program name is in Explanation: A sipcc function call was made from a
the same subsystem as the program that issued the SIPCC TARGET(TPF) C application program. The sipcc function is
macro. no longer supported for TARGET(TPF) C application
programs.
000295 System action: The issuing entry control block (ECB) exits.
Program: CCSICF(CNP0) User response: If the TARGET(TPF) C application program
requires the use of the sipcc function, the application program
Error Message: EVA — SVA CONVERSION ERROR
must be migrated to ISO-C or modified to interface with an
Explanation: An error occurred when converting the data ISO-C application that can perform the sipcc function call.
area 2 ECB virtual address into a system virtual address
See TPF Application Programming and the TPF C/C++ Language
(SVA).
Support User's Guide for more information about migrating
System action: The E-type program that issued the SIPC application programs from TARGET(TPF) to ISO-C.
request ends.
User response: Have your system programmer review the 0002A3
system error dump.
Program: Displayed on console and in dump.
Error Message: VARIES BY FUNCTION. MPIFC ERROR
000296
DESCRIBED.
Program: CCSICF(CNP0)
Explanation: The MPIFC macro was run to invoke MPIF
Error Message: SIPC USER LIST ERROR processing. An unexpected error code was returned.
Appended Message: SIPC USER LIST MISSING OR NOT System action: Specific function is aborted.
VALID
System Errors 53
0002A4 • 000302
System action: No alarm is sent. The program backs or exits User response: None.
according to the option specified.
User response: None. 000309
Program: Displayed on the console and in the dump.
000304 Error Message: None.
Program: Displayed on the console and in the dump. Explanation: The AI line number in EBWSLN is not valid.
Error Message: None. System action: The program is exited.
Explanation: There is no own text for the alarm message. User response: None.
System action: No alarm is sent. The program backs or exits
according to the option specified.
00030A
User response: None.
Program: Displayed on the console and in the dump.
Error Message: None.
000305
Explanation: The indicator passed by CMR is not valid.
Program: Displayed on the console and in the dump.
System action: The program is exited.
Error Message: None.
User response: None.
Explanation: There are not enough substitution characters
supplied.
00030B
System action: No alarm is sent. The program backs or exits
according to the option specified. Program: Displayed on the console and in the dump.
User response: None. Error Message: None.
Explanation: An STP/RSM was received for a nonexistent
000306 channel.
Program: Displayed on the console and in the dump. System action: The line control block (LCB) is ignored.
Error Message: None. User response: None.
Explanation: There an odd number of substitution characters
specifying hexadecimal data. 00030C
System action: No alarm is sent. The program backs or exits Program: Displayed on the console and in the dump.
according to the option specified.
Error Message: None.
User response: None.
Explanation: A subsequent ENQ was requested — the line is
not in the ENQ procedure.
000307
System action: The request is treated as a first ENQ request.
Program: Displayed on the console and in the dump.
User response: None.
Error Message: None.
Explanation: There is no address supplied for the alarm 00030E
message.
Program: Displayed on the console and in the dump.
System action: No alarm is sent. The program backs or exits
according to the option specified. Error Message: None.
User response: None. Explanation: There was a FIND error while retrieving a type
B messaged saved by CPSF.
System action: The message is lost. Processing is continued.
User response: None.
System Errors 55
00030F • 000319
00030F 000314
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: None. Error Message: None.
Explanation: There was an error while retrieving a message Explanation: There is a multiblock message back but the
referenced from the MBI slot. message block identifier (MBI) is not in use.
System action: An internal indicator is set and processing System action: Processing is continued.
continues. The file address is set as available in the link pool
directory. User response: None.
Program: Displayed on the console and in the dump. Error Message: None.
Error Message: None. Explanation: There are too many syns specified in the
keypoint.
Explanation: There was a file address compute program
(FACE) error on the message and the ordinal number was System action: The number of extra syns is set to the
calculated from FPD. maximum CXJMXS value and processing is continued.
System action: The file address is set as available in the link User response: None.
pool directory and processing is continued.
User response: None. 000316
Program: Displayed on the console and in the dump.
000311 Error Message: None.
Program: Displayed on the console and in the dump. Explanation: There was an error retrieving the message
Error Message: None. referenced from the AMQ SAVE LK4BQR area.
Explanation: There was an error retrieving a message using System action: The current save area slot is set as inactive
the ordinal number from the FPD. and processing is continued.
System action: The file address is set as available in the link User response: None.
pool directory and processing is continued.
User response: None. 000317
Program: CML2
000312 Error Message: SUBCHANNEL HANG PROBLEM
Program: Displayed on the console and in the dump. Explanation: No response is received from the line after an
Error Message: None. ENABLE/DISABLE command is issued. The hardware may be
malfunctioning.
Explanation: There was an error while retrieving a message
and the address is saved in the ECB work area. System action: No further initialization of the line takes
place.
System action: The file address is set as available in the link
pool directory and processing is continued. User response: Check the hardware.
Program: Displayed on the console and in the dump. Error Message: None.
Error Message: NO MESSAGES ON QUEUE DESPITE Explanation: There is no ETB in the message.
LK5LQB System action: The program is exited.
Explanation: There are no messages on the channel queue User response: None.
that is being processed currently even though LK5LQB
indicates that there are messages on the queue.
000319
System action: Processing is continued.
Program: Displayed on the console and in the dump.
User response: Look for the lost chain of messages.
Error Message: None.
Explanation: There was a FACE error while calculating the
file addressing an ordinal number from FPD.
Explanation: There was an error while retrieving a message System action: Processing is continued with any other
in CMR3 during message reassembly. message blocks, if there are any.
System action: If block 0 is already retrieved, the message is User response: None.
handled as if an end of chain is found. Otherwise, an attempt
is made to retrieve block 0. If that fails, the program is exited.
000321
User response: None.
Program: Displayed on the console and in the dump.
Error Message: None.
00031C
Explanation: An end-of-message-complete (EOM) was found
Program: Displayed on the console and in the dump. that is not the last character.
Error Message: None. System action: The characters beyond the EOM are ignored
Explanation: There was a file address compute program and processing is continued.
(FACE) error while using an ordinal number of block 0 during User response: None.
error correction procedures.
System action: The program is exited.
000322
User response: None.
Program: Displayed on the console and in the dump.
Error Message: None.
00031D
Explanation: An end-of-message-complete (EOM) was found
Program: Displayed on the console and in the dump. in the last character of the message block but no more blocks
Error Message: None. exist.
Explanation: A link routing table search was not successful. System action: The remaining blocks are discarded and
processing is continued.
System action: The message is discarded and the program is
exited. User response: None.
Program: Displayed on the console and in the dump. Error Message: None.
Error Message: None. Explanation: A message was found that was destined for a
user type-A nonterminal-oriented application package that is
Explanation: There were link envelope format errors on the not defined.
LCI and the ACI.
System action: The ECB is exited.
System action: Return is made to the CMR1, which then
exits. User response: The SERRC macro should be replaced by an
ENTC to the USERS type-A nonterminal-oriented application
User response: None. package.
System Errors 57
000324 • 00032C
000324 000329
Program: Displayed on the console and in the dump. Program: CMSM CMSL CMCK
Error Message: INCOMPLETE TYPE A MESSAGE Error Message: ERROR RETRIEVING MCR RECORD
Explanation: The last message block on the AMQ was not Explanation: The master control record (MCR) is maintained
indicated as being the last of a message. on file. It must be read in from file to:
System action: The type-A output sender active switch is v Add messages to it
turned off and the program exits. v Dequeue messages from it
User response: None. v Mark messages as Acknowledged.
System action: The message is discarded and also further User response: None.
blocks on the AMQ until either a last block is found or the
AMQ is empty when error 000324 occurs.
00032B
User response: None.
Program: Displayed on the console and in the dump.
Program: CMSL CMSM Explanation: There was an error while retrieving the
overflow message block from file.
Error Message: Error retrieving message from file.
System action: For type-A, the sequence ***XMIT Err*** is set
Explanation: A master control record (MCR) slot contains up in a block. For type-B, the sequence QTB-QTB-QTB is set
information about a given message including its file address. up. This is then treated as the last block of the message.
When the TPF system is ready to send that message, the
message is read in from file. An error occurred during the User response: None.
read.
System action: This message is skipped by marking its slot in 00032C
the MCR as inactive. Processing is continued with the next
message. Program: Displayed on the console and in the dump.
the AMQ following the NAK process. Explanation: There was error while retrieving a nonterminal
message from file.
System action: For type-A, the sequence ***XMIT error*** is
set up in a block. For type-B, the sequence QTB-QTB-QTB is System action: See the 00032C system error message for
set up. This is then treated as the last block of the message. more information.
00032D 000332
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
System action: All blocks are discard and the next NAK item System action: See the 00032C system error message for
(if there is any) is processed. more information.
User response: None. User response: None.
00032E 000333
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: None. Error Message: None.
Explanation: There was an error while retrieving the agent Explanation: There was an error while retrieving the prime
assembly area (AAA) or the routing control block (RCB) for message block for NAK processing.
type-A NAK processing.
System action: See the 00032C system error message for
System action: See the 00032C system error message for more information.
more information.
User response: None.
User response: None.
000334
00032F
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: None.
Error Message: None.
Explanation: The TPF system was unable to find the highest
Explanation: The message saved in the agent assembly area TSI used when trying to recover from an error situation.
(AAA) or the routing control bock (RCB) was overlaid by
System action: Processing is continued with the next NAK
subsequent input.
item, if there is any.
System action: See the 00032C system error message for
User response: None.
more information.
User response: None.
000335
Program: Displayed on the console and in the dump. Error Message: Error filing MCR record.
Error Message: None. Explanation: An error occurred while filing a master control
record (MCR).
Explanation: There was no message saved in the agent
assembly area (AAA) or the routing control block (ECB) System action: Each time the MCR is updated it is written to
despite the reference. file. An error occurred while writing an updated MCR to file.
The update that was just made is lost. No further processing
System action: See the 00032C system error message for of the MCR takes place at this time.
more information.
If the update was a new message added, the message is lost.
User response: None.
If the update was a message deleted, it remains in the MCR
and will be dequeued the next time CMSM is entered to
000331 dequeue a message from the MCR.
Program: Displayed on the console and in the dump. If the update was a pointer to a new MCR, it is lost and a new
MCR is obtained the next time CMSM is called to add
Error Message: None. messages to the MCR.
System Errors 59
000336 • 00033F
If the update was marking a slot inactive because an User response: None.
acknowledgement was received, it remains an
unacknowledged message and may be resent at some future
time. 00033A
User response: The pointers to the file copy of the first and Program: Displayed on the console and in the dump.
last MCR records are in the link KL4KC keypoint at labels Error Message: None.
LK4MCA and LK4MFL respectively. The address of the link
keypoint is in R4. These can be used to examine the file copies Explanation: There was an error while retrieving a
of the MCR records. Examination of the data levels in the ECB nonterminal-oriented message from file while trying to
(which data level varies based on where the error occurred) retransmit a message as a new message.
can provide information about which MCR was being filed.
System action: The program is exited.
User response: None.
000336
Program: Displayed on the console and in the dump.
00033B
Error Message: None.
Program: Displayed on the console and in the dump.
Explanation: There was an error while retrieving the prime
Error Message: None.
message block with a file address obtained from the MCR.
Explanation: There was an error retrieving an agent assembly
System action: The message is lost. Processing is continued
area (AAA) or a routing control block (RCB) referenced prime
with the next MCR item, if there is any.
message block from file while trying to retransmit a message
User response: None. as a new message.
User response: None. Explanation: There was an XLMA retrieval error while
attempting to retransmit a multiblock message as a new
message.
000338
System action: The block on level 1, if present, is released
Program: Displayed on the console and in the dump. and the program is exited.
Error Message: None. User response: None.
Explanation: The character count in the prime block of a
multiblock type-A or type-B message is not valid. The 00033D
character count must be greater than the value defined in
LK4MXT in the link keypoint. Program: Displayed on the console and in the dump.
System action: The prime block is released and error text is Error Message: None.
set up in a block.
Explanation: There was an error while retrieving a block of a
User response: For type-A, the sequence ***XMIT error*** is partially received message while attempting to release file
used. For type-B, the sequence QTB-QTB-QTB is used. This space during message discard processing.
program then sets an error indicator and returns to the calling
System action: The program is exited.
segment through the BACKC.
User response: None.
000339
00033F
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: None.
Error Message: UNSOLICITED MESSAGE NOT ALLOWED
Explanation: There was an error retrieving the agent
assembly area (AAA) or the routing control block (RCB) while Explanation: COUB received an unsolicited message from an
trying to retransmit a multiblock message as a new message. application program that cannot be delivered because the
device is defined (RVT1) as unable to receive unsolicited
System action: The block on level 1, if present, is released
messages. This error can only occur for 3270-type SDLC
and the program is exited.
devices referenced by pseudo line number, interchange
address, and terminal address (LNIATA). System action: The router error message processor is entered
to send an error message to the console.
System action: A system error is issued and is exited.
User response: None.
User response: The application program that originated the
message should be reviewed and possibly modified to ensure
that the device is defined as able to receive unsolicited 000345
messages.
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump. Explanation: LOC. RTR — There is a FILE error on the first
block.
Error Message: None.
System action: The router error message processor is entered
Explanation: LOC. RTR — there are too many blocks in the to send an error message to the console.
message.
User response: None.
System action: The router error message processor is entered
to send an error message to the console.
000346
User response: None.
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump. Explanation: While attempting to locate a WGTA slot for an
input line number, interchange address, and terminal address
Error Message: LOC. RTR — INVALID FILE ADDRESS IN (LNIATA), the WGTAC macro found an error.
MESSAGE
System action: A system error is issued and the program is
Explanation: LOC. RTR — There is a file address that is not exited. In addition, the message is discarded.
valid in the message.
User response: The address (LNIATA) contained in the
System action: The router error message processor is entered output message is used as input to the WGTAC macro. The
to send an error message to the console. given LNIATA is in error.
User response: None.
000347
Program: Displayed on the console and in the dump. Error Message: None.
Error Message: None. Explanation: LOC. RTR — There is a line number in the
RCAT that is not valid.
Explanation: The LOC. RTR-INV record is in the message
chain. System action: The program is exited.
System action: The router error message processor is entered User response: None.
to send an error message to the console.
User response: None. 00034A
Program: Displayed on the console and in the dump.
000343
Error Message: UNABLE TO RETURN MSG TO
Program: Displayed on the console and in the dump. ORIGINATOR
Error Message: None. Explanation: The returned message cannot be routed.
Explanation: LOC. RTR — There is a hardware error on the System action: The message prime core block and chained
message chain. pool records are released. The program either is exited or does
a BACK, depending upon the return indicated in the entry
System action: The router error message processor is entered
control block (ECB).
to send an error message to the console.
User response: Determine why the TPF system does not
User response: None.
return the message, for example, the lines may be down or the
application program may not be active.
000344
Program: Displayed on the console and in the dump.
System Errors 61
00034B • 000354
00034B 000350–0003FF
Program: Displayed on the console and in the dump.
Explanation: An error was found on input that originated Program: Displayed on the console and in the dump.
from an application program destined to another application
Error Message: None.
program but the Message Router is unavailable to CSMP to
route the message back to the originating application program. Explanation: BSC RTR — Too many slots were found in the
BSC station name conversion table (SN0CT) for a station name
System action: A SERRC macro is issued and the program is while building a list of paths for routing a message to a
exited. station.
User response: None. System action: Processing continues. Excess slots are ignored.
User response: Have your system programmer correct
00034C SN0CT for the station name involved. EBW000-011 — RCPL.
Program: CLGA, CVAA
000351
Error Message: None.
Program: Displayed on the console and in the dump.
Explanation: A message that was unable to be transmitted by
the Message Router was returned to CSMP. Error Message: None.
System action: The message is released, a SERRC macro is Explanation: A CPU ID in the routing control application
issued, and the program is exited. table (RCAT) status message is not valid.
User response: See your system programmer to check the System action: A system error is issued and the program is
following areas: exited.
v A CPU-ID whose destination is not valid User response: None.
v An application name that is not valid
v No message block held. 000353
Program: Displayed on the console and in the dump.
00034D
Error Message: None.
Program: COBB
Explanation: BSC RTR — The byte count in the prime
Error Message: None. message block of an output message to a BSC station is too
large to allow insertion of the routing control parameter list
Explanation: LOC. RTR-INV — pseudo IA TA. (RCPL) into the message block.
System action: The program is exited. System action: The output message is discarded.
User response: None. User response: Have your system programmer or application
programmer correct the originating application program.
EBW000-O11 of the dump contains the routing control
00034E parameter list (RCPL) associated with the error.
Program: COBB
Error Message: None. 000354
Explanation: LOC. RTR-INV — SKN in LRT. Program: Displayed on the console and in the dump.
Program: COQQ System action: If the line number was specified as a specific
BSC station address in the routing control parameter list
Error Message: None. (RPCL), the message is discarded. If the line number was
obtained from the SN0CT record while processing a station
Explanation: COQQ-ERR — return from CVIO/CVIP. name destination, the processing continues and ignores the
System action: The terminal error response message is not bad line.
sent to the originating terminal and the program is either User response: Have your system programmer correct the
exited or returned to the caller. originating application program or the SN0CT record.
User response: Have your system programmer verify the EBW000-011 contains the routing control parameter list
(RCPL).
status of the predefined message formats in CVIP and face is
satisfied.
000355 000359
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: None. Error Message: None.
Explanation: BSC RTR — while trying to validate a binary Explanation: There was a file error on the Copy Message
synchronous communication (BSC) station address, a symbolic utility in a MASS environment.
line number was found that was not a BSC line.
System action: The message is returned to the originator.
System action: See the 000354 message for more information.
User response: Have your system programmer check the
User response: None. system error dump to find out why the COBD copy segment
returned an error condition.
000356
00035A
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: None.
Error Message: None.
Explanation: BSC RTR — while trying to validate a binary
synchronous communication (BSC) station address, a station Explanation: There was a transfer vector for the remote
number was found that was greater than the number of router that is not valid or the activation of the Router option
terminal interchange status table entries for the associated line. was not valid.
System action: If the station number was specified as a System action: The processing is ended.
specific BSC station address in the routing control parameter
list (RCPL) associated with the output message, the message is User response: None.
discarded.
If the station number was obtained from the station name 00035B
conversion table record while processing a station name Program: Displayed on the console and in the dump.
destination, the processing continues and ignores the bad
station number entry. Error Message: None.
User response: Have your system programmer correct the Explanation: The remote router increments the resource
originating application program or the SN0CT record. count for input messages received from a remote processor.
EBW000-011 contains the routing control parameter list This error is indicated when the maximum node count limit is
(RCPL). exceeded.
System action: The message is returned to the originator.
000357
User response: None.
Program: COUM, COUR, COUX
Error Message: None. 00035D
Explanation: While attempting to send an unsolicited Program: Displayed on the console and in the dump.
message to a terminal, a line number, interchange address, and
terminal address (LNIATA) for a non-SNA terminal or a RID Error Message: None.
for a SNA terminal that is not valid was found. Explanation: There was no direct routing path found to a
System action: The message is not delivered and the remote application program.
program is exited. System action: The message is returned to the originator.
User response: Review the dump to determine the cause of User response: None.
the error and to correct it. The RID/LNIATA of the destination
terminal is located at EBW000.
00035E
Program: Displayed on the console and in the dump. Error Message: None.
Error Message: None. Explanation: There was no direct Line/Link path to the
remote application program found.
Explanation: There was an unsolicited read error for the
routing control block (RCB). System action: The message is returned to the originator.
System Errors 63
00035F • 000369
00035F 000363
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: None. Error Message: None.
Explanation: The router found a line number for the Explanation: There was a FINWC error while retrieving an
destination path that is not valid. unsolicited Notification List record.
System action: The message is returned to the originator. System action: The processing is ended.
User response: None. User response: Have your system programmer review the
system error dump to determine the cause of the error and
000360 correct it.
System action: The message is returned to the originator. Explanation: The Line/Link selected to send a message to a
remote processor is not binary synchronous communication
User response: None.
(BSC) or synchronous link control (SLC).
System action: The message is discarded.
000361
User response: Have your system programmer review the
Program: Displayed on the console and in the dump.
system error dump and check the Line/Link selection.
Error Message: INVALID SNA ROUTC ENTRY — POSSIBLE
CORRUPTED RCPL.
000367
Explanation: The ECB-driven router received control of a
message destined for a SNA terminal. With the exception of Program: Displayed on the console and in the dump.
unsolicited messages, messages destined for SNA nodes Error Message: ERROR RETURN FROM SENDC/B MACRO
should be processed by CS96 (CCSNA3). This dump indicates
a corrupted routing control parameter list (RCPL). Explanation: The SENDC/B failed while sending a message
on a binary synchronous communication (BSC) line to a
System action: A system error is issued and the program is
remote processor.
exited.
System action: The message is discarded.
User response: None.
User response: Have your system programmer review the
Program: Displayed on the console and in the dump.
system error dump to determine the cause of the error and
Error Message: LU62 — INVALID ROUTC SEQUENCE OR correct it.
PARMS
Explanation: The ROUTC entered the LU62 queue control 000368
segment to process a queue request and one of the following
error conditions occurred: Program: Displayed on the console and in the dump.
v There is no message to queue Error Message: UNABLE TO PROCESS
v The requested function is not valid.
Note: An error message is not issued for unsolicited messages
System action: A system error is issued and the program is
being policed.
exited.
Explanation: There was an FIWHC error while retrieving a
User response: None.
prime Unsolicited Message Directory record.
System action: Processing is continued while the unsolicited
000362
messages are being policed. Otherwise, the processing is
Program: Displayed on the console and in the dump. ended.
Error Message: None. User response: Have your system programmer review the
system error dump to determine the cause of the error and
Explanation: The Router was unable to deliver a message correct it.
from a binary synchronous communication (BSC) station.
System action: A system error is issued and the program is 000369
exited.
Program: Displayed on the console and in the dump.
User response: The path to the destination should be
activated or the BSC station should be shut down. Error Message: None.
Explanation: A symbolic line number that is not valid was User response: Have your system programmer review the
found. system error dump to determine the cause of the error and to
correct it.
System action: The TPF system continues the search for the
next alternate line.
000371
User response: None.
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump. Explanation: There was an FINWC error while retrieving an
Application Terminal directory record.
Error Message: None.
System action: The processing is continued if the calling
Explanation: A line number that is not valid was found for program expects a return (with an error indication).
the remote destination path.
User response: Have your system programmer review the
System action: The message is returned to the originator. system error dump to determine the cause of the error and to
User response: None. correct it.
000373
00036D
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Explanation: A byte count that is not valid was found for the Note: An error message is not issued during restart.
message to a remote destination.
Explanation: There was an unsolicited read error retrieving
System action: The message is returned to the originator. CTKC (keypoint C) in order to set or check the Unsolicited
User response: None. Message Directory record initialization bits.
System action: The processing is continued if there is a
Restart entry. Otherwise, the message is sent to the operator
00036E
and processing is ended.
Program: Displayed on the console and in the dump.
User response: Have your system programmer should
Error Message: None. review the system error dump to determine the cause of the
error and to correct it.
Explanation: A transfer vector that is not valid or activation
of a Router option that is not valid was found.
System action: The processing is ended.
System Errors 65
000374 • 00037D
000374 000378
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
User response: Have your system programmer review the Error Message: None.
system error dump to determine if a valid application Explanation: The broadcast request sent by the application
program was specified or if its routing control application program is not formatted correctly.
table (RCAT) residency was in error.
System action: The processing is ended.
System action: The processing is ended. Program: Displayed on the console and in the dump.
User response: Have your system programmer review the Error Message: UNABLE TO PROCESS
system error dump to determine the cause of the error and to Explanation: There was an unsolicited file error — unable to
correct it. file an Application Message Format record when trying to
send a message to a single logical unit (LU) (not 3270 SDLC or
NEF). The message is the following:
v INVALID NODE FOR UNSOL
System action: The processing is ended when an UNABLE User response: Have your system programmer review the
TO PROCESS message is sent to the operator. system error dump to determine the cause of the error and to
correct it. The system error dump shows the following:
User response: Have your system programmer review the
system error dump to determine the cause of the error and to v The file address and core block reference words
correct it. v The associated error indicator byte
v The record type indicator.
00037E
Program: Displayed on the console and in the dump. 000382
Error Message: UNSOLICITED ERROR IN READ OF Program: Displayed on the console and in the dump.
MESSAGE. Error Message: FACE/FIND ERROR ON ZPTCH ROOT FILE
Explanation: There was an FINWC error while retrieving the Explanation: An error occurred during retrieval of the
unsolicited message record. ZPTCH root fixed-file record.
System action: The processing is ended and an error message System action: A system error dump is issued and
is sent to the operator. processing is ended.
User response: None. User response: Have your system programmer review the
system error dump to determine the cause of the error and to
000380 correct it. The system error dump shows the following:
v The file address and core block reference words
Program: Displayed on the console and in the dump.
v The associated error indicator byte.
Error Message: UNABLE TO RETRIEVE IFMSG TABLE
Explanation: An error occurred during retrieval of the file To force the ZPTCH root fixed-file record to be re-initialized,
address of the prime or overflow IFMSG record. enter ZIFIL IBMMS/00E7/00/23/23/NNN/N.
System action: If the error occurs on the the prime record, See TPF Operations for more information about the ZPTCH
the TPF system sends an error message to the operator and command.
processing ends.
If the error occurs on the overflow record and the request is a 000383
display, processing continues with the prime record.
Otherwise, the TPF system sends an error message to the Program: Displayed on the console and in the dump.
operator and processing ends.
Error Message: FIND ERROR ON ZPTCH PATCH DECK
User response: Have your system programmer review the
Explanation: An error occurred during retrieval of the patch
system error dump to determine the cause of the error and to
deck pool record.
correct it.
System action: A system error dump is issued and
processing is ended.
000381
User response: Have your system programmer review the
Program: Displayed on the console and in the dump.
system error dump to determine the cause of the error and to
Error Message: UNABLE TO RETRIEVE IFMSG TABLE correct it. The system error dump shows the following:
v The file address and core block reference words
Explanation: A FIND error occurred during retrieval of the
prime or overflow IFMSG record. v The associated error indicator byte.
System Errors 67
000391 • 0003C3
continues for the next SLN or in the case of CVLP the error
000391
message is issued and then it is exited.
Program: Displayed on the console and in the dump.
User response: Review the system error dump to determine
Error Message: None. the incompatibility between the system communication
configuration table (CK6KE) and the symbolic line status table
Explanation: The TPF system is unable to find a Conversion (SLSTL).
Resource Vector entry for a given resource ID.
The system initialization program (SIP) creates the system
System action: A system error dump is issued and the entry communication configuration table and the 3270 local SLN
control block (ECB) is ended. range, and system communication keypoint (SCK) generation
User response: None. creates the symbolic line status table.
See TPF System Generation for more information about these
procedures.
0003A0
The SLN in question is in EBW008-009 in CVLC, CVLG, and
Program: Displayed on the console and in the dump.
CVLP, and it is in EBW022-023 for CVLD. R2 points to CK6KE
Error Message: BSC STATION ADDR TABLE LOAD FAIL and R3 to the SLSTL entry for the SLN.
User response: Review the system error dump for database Explanation: The 3270 local start a line (CVLC), restart
problems or user error on input. (CVLD), or stop a line (CVLG) determined that the subchannel
address in the line status table is zero (field: CPMVSC).
Note: The first message in the device queue is the one that x E or G
caused the I/O error. Return to CVLB to restart the
Explanation: The 3270 local I/O program, Write (CLOE), or
device queue to clear the error indicators.
Asynchronous Write (CLOG) received a command reject status
User response: Review the system error dump to determine from the control unit (3272) because the Write command is not
the symbolic line number (SLN) of the device in error. One valid or a command that is not valid was detected at SEND
possible action is to stop the device or to have the operator macro time.
retry the input message that caused the suspect output
System action: A system error is issued and processing is
message.
continued with the next entry on the device queue or goes to
The EBROUT field of the ECB contains the SLN of the device the I/O exit if detected at interrupt time.
in error. The CCP CCW areas for the SLN contains the address
If detected at SEND macro time, then a system error is issued
of the bad message as the first entry on the write queue
and exits the ECB.
(CXQTOP).
User response: Review the system error dump to determine
See TPF Operations for more information about the ZLSTP
who requested the output operation with a command that is
command.
not valid.
There may have been an application package error while
0003C5
formatting the output message. R1 is a pointer to the output
Program: Displayed on the console and in the dump. message.
System Errors 69
0003C9 • 0003E0
Program: Displayed on the console and in the dump. User response: Review the system error dump for database
problems or user error on input.
Error Message: TERM MAP REC PRIME FINWC ERROR
Explanation: There was a retrieval error on a file copy of the 000405
Terminal Map record.
Program: Displayed on the console and in the dump.
System action: A system error is issued. Held levels (3
through 5) are released, a message is sent, and processing is Error Message: MAP FILE INDEX CHAIN FINWC ERR
continued. Explanation: There was a retrieval error for the Map File
User response: Review the system error dump for database Index.
problems or user error on input. System action: A system error is issued. Held levels are
released and processing is ended.
000401 User response: Review the system error dump for database
Program: Displayed on the console and in the dump. problems or user error on input.
System action: A system error is issued. The held levels are Error Message: MAP FILE INDEX TABLE FINWC ERROR
released and processing is ended. Explanation: There was a retrieval error on the file copy of a
User response: Have your system programmer review the Map File Index record.
system error dump to determine the cause of the error and to System action: A system error is issued. Held levels are
correct it. released and processing is ended.
User response: Review the system error dump for database
000402 problems or user error on input.
Program: Displayed on the console and in the dump.
Error Message: TERM MAP REC FACE ERROR (AS0MP) 000407
Explanation: There was a retrieval error on the file copy of a Program: Displayed on the console and in the dump.
terminal map record. Error Message: MAPPING FACE ERROR RETURN
System action: A system error is issued. Held levels are Explanation: The input to the file address compute program
released and processing is continued. (FACE) to the return file address resulted in an error.
User response: Review the system error dump for database System action: A system error is issued. Held levels are
problems or user error on input. released and processing is ended.
User response: Review the system error dump for database
problems or user error on input.
System Errors 71
000408 • 000411
000408 00040D
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: MAPPING FACE ERROR RETURN Error Message: INVALID ERROR MSG NUMBER (ASL4)
Explanation: Input to the file address compute program Explanation: A mapping error message number passed to
(FACE) to a return file address resulted in an error. ASL4 is incorrect.
System action: A system error is issued. Held levels are System action: A system error is issued. Held levels are
released and processing is ended. released and processing is continued.
User response: Review the system error dump for database User response: Have your system programmer review the
problems or user error on input. system error dump to determine the cause of the error and to
correct it.
000409
00040E
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: MAPPING TAPE READ ERROR
Error Message: RCB RETRIEVAL ERROR (ASL4)
Explanation: The database create function of mapping
received a tape read error (ASL3). Explanation: There was a retrieval error from a file of the
routing control block (RCB).
System action: A system error is issued. Held levels are
released and processing is ended. System action: A system error is issued. Held levels are
released and processing is continued.
User response: Review the system error dump for database
problems or user error on input. User response: Review the system error dump for database
problems or user error on input.
00040A
00040F
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: MAPPING FACE ERROR RETURN
Error Message: MAP – FILE INIT. RETRIEVAL ERROR
Explanation: An error was returned from the file address
compute program (FACE) that calculates a file address. Explanation: There was a retrieval error from a file of the
map file index record or a terminal map record.
System action: A system error is issued. Held levels are
released and processing is continued. System action: A system error is issued. Held levels are
released and processing is continued.
User response: Review the system error dump for database
problems or user error on input. User response: Review the system error dump for database
problems or user error on input.
00040B
000410
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: TERM MAP REC FINWC ERROR
Error Message: NO BLOCK ON LEVEL 0
Explanation: There was a retrieval error on the terminal map
record. Explanation: The parameter list passed to segment CVIO is
contained in a block level 0. The calling segment failed to
System action: A system error is issued. Held levels are provide this block and due to this condition CVIO cannot
released and processing is continued. continue processing.
User response: Review the system error dump for database System action: A system error is issued and is exited.
problems or user error on input.
User response: Review the system error dump and the code
of the calling segment to determine the reason for the absence
00040C of the parameter list on level 0. This problem occurs only as a
Program: Displayed on the console and in the dump. result of a software error in the calling segment.
System action: A system error is issued. Held levels are Error Message: INVALID FORMAT NUMBER
released and processing is ended. Explanation: The parameter list passed to CVIO contains a
User response: Review the system error dump for database system format number that is not valid.
problems or user error on input. Any of the following conditions may cause this error:
v Format number = 0
v Format number exceeds range of valid numbers block message with no forward chaining, the additional
v Format number does not match number present in the characters must be taken into consideration when defining a
defined system format. system message.
User response: Review the system error dump. If the format Program: Displayed on the console and in the dump.
number is zero, the calling segment is in error. If the error Error Message: INVALID INDICATORS
occurs when the input format number is nonzero, then you
should review the table of system formats, which exists in Explanation: The indicators passed by the calling segment to
CVIP, to determine whether the defined format numbers agree CVIO/CVIP in the parameter list specified — format 3270
with the number provided by the calling segment. system message do not issue ROUTC EXITC at completion.
This combination results in no output message being sent and
000412 control not being returned to the calling segment.
Program: Displayed on the console and in the dump. System action: A system error is issued, data levels 0 and 6
are released, and exited.
Error Message: INVALID SNA DEVICE ADDRESS
User response: Review the system error dump. The calling
Explanation: The SNA device address passed by CVIO to the segment, which has actually specified an illogical sequence of
RID Conversion Routine caused an error return from RIDC actions, should be modified to correct the indicators set in the
(R15=0). parameter list.
System action: A system error is issued, data levels 0 and 6
are released, and exited. 000416
User response: Review the system error dump. When the Program: CNPY – Processor restart
ROUTC is to be issued by CVIP, CVIO extracts the SNA
device address from the RCPL provided by the calling Error Message: UNABLE TO RETRIEVE CTKI
segment. Otherwise, it is obtained from the block provided on
Explanation: An error condition occurred in CNPY while
level 0 by the calling segment. You need to review the
trying to retrieve keypoint I with a hold option.
contents of the appropriate area for the SNA device address.
System action: The system error routine issues a dump and
restart is aborted.
000413
User response: See the main storage dump to review the
Program: Displayed on the console and in the dump.
restart ECB to determine the exact error condition returned.
Error Message: INVALID LNIATA The most probable error is a main storage block already
existing on the desired data level.
Explanation: The line number, interchange address, and
terminal address (LNIATA) passed by CVIO to WGR1 caused
an error to return from WGR1 (EBW040, bit 0=1). 000417
System action: A system error is issued, data levels 0 and 6 Program: CNPY – Processor restart
are released, and exited.
Error Message: UNABLE TO FIND CPUID in CTKI
User response: Review the system error dump. When the
Explanation: The CPUID in the processor identification table,
ROUTC is to be issued by CVIP, CVIO extracts the LNIATA
PI1DT, could not be found in keypoint I.
from the RCPL provided by the calling segment. Otherwise, it
is obtained from the block provided on level 0 by the calling System action: The system error routine issues a dump and
segment. You need to review the contents of the appropriate restart is aborted.
area for the device address.
User response: Review the main storage dump to determine
whether the CPUID as passed by PI1DT (PI1CPUI). If the
000414 CPUID is proper and does not exist in keypoint I, then the file
copy of CTKI was corrupted since IPL.
Program: Displayed on the console and in the dump.
If the CPUID is proper and does exist in keypoint I, then the
Error Message: MESSAGE EXCEEDS BLOCK SIZE
count field in CTKI was corrupted.
Explanation: The character count, which includes the 3270
If the CPUID is improper then the CPUID field in PI1DT was
control characters, as well as text, cannot be contained in the
corrupted since IPL.
single 381-byte output block constructed by CVIP.
System Errors 73
00041A • 00041E
does not match the machine serial number for the assigned In CVX6, an error occurred while retrieving or filing the
CPUID as found in keypoint I. This means that another module verification table (MVT).
processor that was IPLed just before this processor was given
System action: A system error is issued and the error e
the same CPUID as the current processor. keypoint I was
routine issues a dump.
updated and filed after the IPL program processed but before
CNPY retrieved it. User response: Review the system error dump for the exact
error condition and data record.
System action: The system error routine issues a dump and
restart is aborted.
User response: Do the following: 00041D
System action: A system error is issued and restart is Explanation: One of the following errors occurred:
aborted. v The subsystem ID in keypoint M is either not valid or not
available.
User response: Determine whether the error is due to
inaccurate cabling (hardware) or corruption of keypoint 6 or v Another processor, under a loosely coupled environment,
the MVT on file. filed a modified copy of keypoint M and this processor is
not in sync with the other processors.
v Either the core copy or file copy of keypoint M was
00041C
corrupted.
Program: CVX0, CVX6
System action:
Error Message: None. v For the first error condition, the system error is followed by
Explanation: In CVX0, an error occurred during one of the the CVRM0005T message and restart is ended.
following procedures: v For the second and third error conditions, the system error
v Retrieving keypoint 6 is followed by the CVRM0006T message and restart is
ended.
v Filing keypoint 6
v Retrieving keypoint V. User response: Check the status of the other processors and
check the system error dump if required.
User response: Check the entry control block (ECB) file If there is no return to the user, set message number, release
address word to determine the cause of the error. levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4.
System action: A system error is issued. If returned to the Explanation: There was an error returned from the file
use, set the error indicator, restore user registers, release levels address compute program (FACE) when calculating the file
4 through 6, if in use, restore level 0 and BACKC. address for the Terminal Map record.
If there is no return to the user, set message number, release System action: A system erorr is issued. If returned to the
levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4. user, set the error indicator, restore user registers, release
levels 4 through 6, if in use, restore level 0 and BACKC.
User response: Review the system error dump for database
problems or user error on input. If there is no return to the user, set message number, release
levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4.
000422 User response: Review the system error dump for database
problems or user error on input.
Program: Displayed on the console and in the dump.
Error Message: MST/MSI/ASLA ERROR (ASFI) 000426
Explanation: User parameters that are not valid were pass to Program: Displayed on the console and in the dump.
the input mapping.
Error Message: TERM MAP REC FINWC ERROR(ASFI)
System action: A system error is issued. If returned to the
user, set the error indicator, restore user registers, release Explanation: There was a retrieval error for the Terminal
levels 4 through 6, if in use, restore level 0 and BACKC. Map record.
If there is no return to the user, set message number, release System action: A system error is issued. If returned to the
levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4. user, set the error indicator, restore user registers, release
levels 4 through 6, if in use, restore level 0 and BACKC.
User response: Review the system error error dump for
database problems or user error on input. If there is no return to the user, set message number, release
levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4.
System Errors 75
000427 • 00042E
User response: Review the system error dump for database xxxxxxxx
problems or user error on input. The content of the address, which is the reason code.
Explanation: An error occurred while trying to obtain the
000427 address of the file address compute program (FACE) table.
Program: Displayed on the console and in the dump. System action: The entry control block (ECB) is ended.
Error Message: INCORRECT TERM MAP REC REF(ASFI) User response: Review the reason code to determine why the
address was not obtained. The DADFQ segment provides the
Explanation: User parameters that are not valid were passed meaning of the reason code.
to input mapping.
If there is no return to the user, set message number, release Error Message: FIWHC ERROR — UNABLE TO RETRIEVE
levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4. FCTB RECORD RECHDR AT evmaddr — xxxxxxxxxxxxxxxx
FARW AT evmaddr — xxxxxxxxxxxxxxxx CE1SUD AT evmaddr
User response: Review the system error dump for database — xx
problems or user error on input.
Where:
000428 evmaddr
The address.
Program: Displayed on the console and in the dump.
xxxxxxxxxxxxxxxx
Error Message: UNDEFINED FIELD IN INPUT DATA The content of the address, which is the record header.
Explanation: User parameters that are not valid were passed xxxxxxxxxxxxxxxx
to input mapping. The content of the address, which is the file address
System action: A system error is issued. If returned to the reference word.
user, set the error indicator, restore user registers, release xx The content of the address, which is the data level error
levels 4 through 6, if in use, restore level 0 and BACKC. indicator.
If there is no return to the user, set message number, release Explanation: An error occurred while trying to retrieve the
levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4. file address compute program (FACE) table (FCTGB). If the
User response: Review the system error dump for database record was not retrieved, the line containing the record header
problems or user error on input. (RECHDR) will not be displayed.
System action: The entry control block (ECB) is ended.
000429 User response: Review the record header, file address
Program: Displayed on the console and in the dump. reference word (FARW) and error indicator (CE1SUD) to
determine why the record was not retrieved.
Error Message: RIDCC ERROR RETURN
Explanation: The RIDCC routine found an error while trying 00042E
to find the appropriate RV1VT entry slot as requested by
ASFJ/ASFP. Program: Issued by CZXI and CZXM
System action: If the user requests returns from mapping, an Error Message: FILNC ERROR — UNABLE TO FILE FCTB
error indicator is set, registers restored, levels released, and a RECORD RECHDR AT evmaddr — xxxxxxxxxxxxxxxx FARW
BACKC issued. AT evmaddr — xxxxxxxxxxxxxxxx CE1SUD AT evmaddr — xx
User response: Review the record header, file address If there is not return to the user, set message number, release
reference word (FARW), and error indicator (CE1SUD) to levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4.
determine why the record was not filed.
User response: Review the system error dump for database
problems or user error on input.
000431
Program: Displayed on the console and in the dump. 000436
Error Message: ASFO – INVALID USER PARAMETERS Program: Displayed on the console and in the dump.
Explanation: User parameters that are not valid were passed Error Message: TERM MAP REC FINWC ERROR(ASFO)
to input mapping.
Explanation: There was a retrieval error for the Terminal
System action: A system error is issued. If returned to the Map record.
user, set the error indicator, restore user registers, release
System action: A system error is issued. If returned to the
levels 4 through 6, if in use, restore level 0 and BACKC.
user, set the error indicator, restore user registers, release
If there is no return to the user, set message number, release levels 4 through 6, if in use, restore level 0 and BACKC.
levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4.
If there is no return to the user, set message number, release
User response: Review the system error dump for database levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4.
problems or user error on input.
User response: Review the system error dump for database
problems or user error on input.
000432
Error Message: MST/MSI/ASLA ERROR (ASFO) Program: Displayed on the console and in the dump.
Explanation: User parameters that are not valid were passed Error Message: INCORRECT TERM MAP RECORD (ASFO)
to input mapping.
Explanation: User parameters that are not valid were passed
System action: A system error is issued. If returned to the to input mapping.
user, set the error indicator, restore user registers, release
System action: A system error is issued. If returned to the
levels 4 through 6, if in use, restore level 0 and BACKC.
user, set the set error indicator, restore user registers, release
If there is no return to the user, set message number, release levels 4 through 6, if in use, restore level 0 and BACKC.
levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4.
If there is no return to the user, set message number, release
User response: Review the system error dump for database levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4.
problems or user error on input.
User response: Review the system error dump for database
problems or user error on input. The output terminal map
000433 record or sequence number does not match.
System action: A system error is issued. If returned to the Explanation: The required terminal map record is not
user, set the error indicator, restore user registers, release present.
levels 4 — 6, if in use, restore level 0 and BACKC.
System action: A system error is issued and the program is
If there is no return to the user, set message number, release exited.
levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4.
User response: Review the system error dump for database
User response: Review the system error dump for database problems or user error on input.
problems or user error on input.
00043B
000434
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: INVALID BLOCK SIZE (ASF4)
Error Message: RCB FIWHC ERROR (ASFO)
Explanation: The block size in the ECB is not valid.
Explanation: There was a retrieval error on the routing
control block (RCB). System action: A system error is issued. If returned to the
user, set the error indicator, restore user registers, release
System action: A system error is issued. If returned to the levels 4 through 6, if in use, restore level 0 and BACKC.
user, set the error indicator, restore user registers, release
levels 4 through 6, if in use, restore level 0 and BACKC. If there is no return to the user, set message number, release
levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4.
System Errors 77
00043C • 000443
User response: Review the system error dump for database If there is not return to the user, set message number, release
problems or user error on input. levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4.
User response: Review the system error dump for database
00043C problems or user error on input.
Explanation: There was a retrieval error on the Terminal Map Error Message: AMSG FINWC ERROR (ASF4)
record.
Explanation: There was a retrieval error from file.
System action: A system error is issued. If returned to the
System action: A system error is issued. If returned to the
user, set the error indicator, restore user registers, release
user, set the error indicator, restore user registers, release
levels 4 through 6, if in use, restore level 0 and BACKC.
levels 4 through 6, if in use, restore level 0 and BACKC.
If there is no return to the user, set message number, release
If there is no return to the user, set message number, release
levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4.
levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4.
User response: Review the system error dump for database
User response: Review the system error dump for database
problems or user error on input.
problems or user error on input.
00043D
000441
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: AMSG PRIME FINWC ERROR (AM0SG)
Error Message: MAPPING – BEYOND SCREEN LIMIT
Explanation: There was a retrieval error on the prime file
copy. Explanation: User parameters that are not valid were passed
to the input mapping.
System action: A system error is issued. If returned to the
user, set the error indicator, restore user registers, release System action: A system error is issued. Release levels 0, 2,
levels 4 through 6, if in use, restore level 0 and BACKC. and 6, if held. Set R1=1, R2=buffer address for the output
message and ENTDC ASL4.
If there is no return to the user, set message number, release
levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4. User response: Review the system error dump for database
problems or user error on input. Beyond limitation set in the
User response: Review the system error dump for database Mapping Support Page/Scroll Control record.
problems or user error on input.
000442
00043E
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: AMSG CHAIN FINWC ERROR (AM0SG)
Error Message: AMSG OVERFLOW FINWC ERR (AM0SG)
Explanation: There was a retrieval error of chain record from
Explanation: There was a retrieval error for overflow file file.
copy.
System action: A system error is issued. Release levels 0, 2,
System action: A system error is issued. If returned to the and 6, if held. Set R1=1, R2=buffer address for the output
user, set the error indicator, restore user registers, release message and ENTDC ASL4.
levels 4 through 6, if in use, restore level 0 and BACKC.
User response: Review the system error error dump for
If there is no return to the user, set message number, release database problems or user error on input.
levels 0, 2, 4, 5, and 6, if in use, and ENTDC ASL4.
User response: Review the system error dump for database 000443
problems or user error on input.
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump. Explanation: There was a retrieval error from file.
Error Message: MAP CONTROL REC FINWC ERR(ASF4) System action: A system error is issued. Release levels 0, 2,
and 6, if held. Set R1=1, R2=buffer address for the output
Explanation: There was a retrieval error from file for message and ENTDC ASL4.
Page/Scroll Control record.
User response: Review the system error dump for database
System action: A system error is issued. If returned to the problems or user error on input.
user, set the error indicator, restore user registers, release
levels 4 through 6, if in use, restore level 0 and BACKC.
Explanation: There was a retrieval error on a file copy of the Program: Displayed on the console and in the dump.
Page/Scroll record.
Error Message: AMSG FINWC ERROR (AM0SG)
System action: A system error is issued. Release levels 0, 2,
Explanation: User parameters that are not valid were passed
and 6, if held. Set R1=1, R2=buffer address for the output
to the input mapping.
message and ENTDC ASL4.
System action: A system error is issued. Release levels 0, 2,
User response: Review the system error dump for database
and 6, if held. Set R1=1, R2=buffer address for the output
problems or user error on input.
message and ENTDC ASL4.
User response: Review the system error dump for database
000446
problems or user error on input.
Program: Displayed on the console and in the dump.
Error Message: AMSG FINWC ERROR (AM0SG) 00044B
Explanation: There was a retrieval error from file. Program: Displayed on the console and in the dump.
System action: A system error is issued. Release levels 0, 2, Error Message: 1ST BLK(MULTI-SCREEN) FINWC ERROR
and 6, if held. Set R1=1, R2=buffer address for the output
Explanation: There was a retrieval error on the first input
message and ENTDC ASL4.
message block of a multiple screen input.
User response: Review the system error dump for database
System action: A system error is issued. File the Page/Scroll
problems or user error on input.
record on level 6. Set R1=1 and ENTDC ASL4.
User response: Review the system error dump for database
000447
problems or user error on input.
Program: Displayed on the console and in the dump.
Error Message: AMSG PRIME FINWC ERROR (AM0SG) 00044C
Explanation: There was a retrieval error from file. Program: Displayed on the console and in the dump.
System action: A system error is issued. Release levels 0, 2, Error Message: AMSG FINWC ERROR (AM0SG)
and 6, if held. Set R1=1, R2=buffer address for the output
Explanation: There was a retrieval error on the
message and ENTDC ASL4.
prime/overflow file copy.
User response: Review the system error dump for database
System action: A system error is issued. File the Page/Scroll
problems or user error on input.
record on level 6. Set R1=1 and ENTDC ASL4.
User response: Review the system error dump for database
000448
problems or user error on input.
Program: Displayed on the console and in the dump.
Explanation: There was a retrieval error from file. Program: Displayed on the console and in the dump.
System action: A system error is issued. Release levels 0, 2, Error Message: MAP PG/SCROLL CTL REC FILNC ERR
and 6, if held. Set R1=1, R2=buffer address for the output
Explanation: There was a file error for the Page/Scroll
message and ENTDC ASL4.
record.
User response: Review the system error dump for database
System Errors 79
00044E • 00045F
System action: A system error is issued. Release level 6, if Explanation: The attempt to file or retrieve an output
held. Set R1=1 and ENTDC ASL4. message (UI0OM) failed.
User response: Review the system error dump for database System action: The simulation process ends and control is
problems or user error on input. returned to the calling segment. The message is passed back to
the caller unsimulated.
Explanation: Horizontal tabs information that is not valid Program: Displayed on the console and in the dump.
was discovered in the terminal map. Error Message: None.
System action: The message is simulated as if there were no Explanation: There was an error filing the AAA/RCB records
horizontal tabs information. for delete and special character processing for the general
User response: Have your system programmer determine the purpose data assembly program.
cause of the error and correct it. System action: A system error is issued and the entry is
exited.
000463 User response: Review the system error dump to determine
Program: Displayed on the console and in the dump. the cause of the error and to correct it.
User response: Have your system programmer determine the Explanation: There was a FINWC error on the previous input
cause of the error and correct it. for delete and special character processing of the general
purpose data assembly program.
System Errors 81
00046A • 000473
System action: A system error is issued and the entry is Assembly program is attempting to reserve an input slot in
exited. the system recovery table (SRT) for the message but none are
available.
User response: Review the system error dump to determine
the cause of the error and to correct it. System action: A system error is issued and the program is
exited.
User response: Have you system programmer determine the Explanation: A FACE error occurred while trying to retrieve
cause of the error and correct it. the UAT record.
Program: Displayed on the console and in the dump. User response: Have your system programmer determine the
cause of the error and correct it.
Error Message: INVALID REQUEST FOR CLEAR
Explanation: During recovery from a sequence/chaining 000472
error, the CDAT segment in CDAP activated the CSCD
segment to format and send a SNA CLEAR command. The Program: Displayed on the console and in the dump.
CSCD segment returned with an error condition in R1.
Error Message: None.
System action: A system error is issued and the program is
Explanation: The terminal address from the UAT entry is not
exited.
valid.
User response: Review the system error dump to determine
System action: Processing is skipped for this entry and
the cause of the error (whether the condition is normal or a
continues with the next UAT entry.
software problem) and to correct it. R1 contains the error code
denoting the reason for the failure to send the CLEAR to the User response: Have your system programmer determine the
requested logical unit (LU). cause of the error and correct it.
00046D 000473
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: NO SRT SLOTS AVAILABLE Error Message: UAT INVALID UA1TTP FIELD (UA1UA)
Explanation: During recovery from a sequence/chaining Explanation: The terminal type data in the UAT entry is not
error, the CDAT segment in the General Purpose Data valid.
System action: If the request was SGL, processing is aborted User response: Review the system error dump to determine
and an error message is sent to the inputting terminal. the database problem. Ensure that the data pilot containing
the UAT records was loaded into the TPF system.
If the request was ALL or MOD, processing skips this UAT
entry and continues with the next entry. No error message is Also review the data pilot containing the UAT records. It may
sent. be necessary to build and reload the UATs. A correction must
be made before the TPF system can cycle past WGTA restart.
User response: Have your system programmer determine the
cause of the error and correct it.
00047A
000474 Program: CGT1
Program: Displayed on the console and in the dump. Error Message: None.
Error Message: RCBI — RCB FACE ERROR Explanation: The WGTA main storage allocation is not large
enough to hold the entries contained in the UAT records.
Explanation: A FACE error occurred while trying to retrieve
the RCB record associated with the UAT entry. This type of System action: WGTA initialization is unable to continue and
error could indicate that there is a discrepancy between the the system restart process is ended.
number of entries in the UAT.
User response: The number of WGTA entries contained in
System action: Processing is aborted at this point in the keypoint C must be changed to equal the number of unique
initialization process. An error message is sent to the inputting entries in the UAT records. You can alter the number of
terminal. The counts for the processing that was completed to WGTA entries by issuing the ZDWGT command.
this point are also sent.
See TPF Operations for more information about the format of
User response: Have your system programmer determine the the ZDWGT command.
cause of the error and correct it.
00047A
000475
Program: CGT2
Program: Displayed on the console and in the dump.
Error Message: None.
Error Message: RCBI — RCB FIND ERROR
Explanation: A file address compute program (FACE) error
Explanation: A FIND error occurred while trying to retrieve was found while writing the WGTA from main storage to file.
the RCB record. This system error is issued after the following message:
v CGT222E FACE ERROR ON WGTA RECORD
System action: If the request was SGL, processing is aborted
and an error message is sent to the inputting terminal. System action: WGTA write processing is ended. The WGTA
build indicator is set on in keypoint C and system restart
If the request was ALL or MOD, processing skips this UAT
continues.
entry and continues with the next entry. No error message is
sent. User response: Review the system error dump to determine
the database problem. Ensure that the correct number of
User response: None.
WGTA records were allocated.
00047A 00047A
Program: CGT0 Program: CGT8
Error Message: UNABLE TO FIND KEYPOINT C Error Message: One of the following:
Explanation: A file retrieval error was found while reading v FACE WGTA ERROR
keypoint C from file. v RECID/RCC ERROR WGTA READ
System action: WGTA initialization is unable to continue and Explanation: A FACE or FIND error was found while
the system restart process is ended. moving the WGTA from file to main storage.
User response: Review the system error dump to determine System action: The WGTA main storage area is cleared and
the database problem. restart continues by reinitializing the WGTA from the
UAT(UA1UA) records.
00047A User response: If the error continues, review the system error
dump for possible database problems.
Program: CGT1
Error Message: None. 00047A
Explanation: A FACE or FIND error was found while reading Program: CGT8
the UAT(UA1UA) records from file.
Error Message: WGTA RECORDS TOO BIG
System action: WGTA initialization is unable to continue and
the system restart process is ended. Explanation: The WGTA main storage allocation is not large
System Errors 83
00047A • 000491
Explanation: An application program issued a SENDC A, C, in Between-Bracket state. This message occurs when some
or L, an SLMTC macro for an NEF terminal, or a ROUTC for other request was made.
an AX.25 terminal for which no RVT entry can be found. An
System action: The entry control block (ECB) is ended.
SNA resource ID (RID) was found in the WGTA table but the
RIDCC macro was unable to find an RVT entry corresponding User response: Have your system programmer review the
to the RID. system error dump to determine the cause of the error and to
correct it.
System action: The entry control block (ECB) is exited.
Error Message: ROUTC ALLOCATE REQUEST MISSING
User response: Have your system programmer review the FMH5
system error dump to determine whether the RID information
in the WGTA is valid, and, if so, why the RVT does not Explanation: This message occurs when an ALLOCATE
contain a corresponding entry. request is made but the functional management header is
missing.
Program: Issued by CCCCP1 (CLXE) upon request from User response: Have your system programmer review the
system error dump to determine the cause of the error and to
CLXD or by CCCCP1(CLXU). Program issuing SENDC,
correct it.
ROUTC, or SLMTC displayed on console and in dump.
Error Message: ROUTC IN RCV_PENDING STATE HAS
Error Message: None.
INVALID REQ
Explanation: An application program issued a SENDC A, C,
Explanation: A request that is not valid was made while the
or L, an SLMTC macro for an NEF terminal, or ROUTC for an transaction program was waiting for confirmation. Only a
AX.25 terminal and the message needs to be converted from CONFIRMED, SEND_ERROR, or DEALLOCATE ABEND
OMSG to AMSG format but no 381- or 1055-byte blocks are request is permitted.
available for the conversion.
System action: The entry control block (ECB) is ended.
System action: The entry control block (ECB) is exited.
User response: Have your system programmer review the
User response: Have your system programmer review the system error dump to determine the cause of the error and to
system error dump to determine the reason for the shortage of correct it.
blocks.
Error Message: ROUTC RECEIVE STATE — INCONSISTENT
REQUEST
0004A0–0004FF Explanation: A request that is not valid was made while the
transaction program was in receive state. Only a
SEND_ERROR, DEALLOCATE ABEND, or
0004A0 REQUEST_TO_SEND request is permitted.
Program: CCSNA2(CS80) System action: The entry control block (ECB) is ended.
Error Message: None. User response: Have your system programmer review the
Explanation: Segment CS80 was unable to send error sense system error dump to determine the cause of the error and to
data in response to a request. correct it.
System action: The entry control block (ECB) is ended. Error Message: ROUTC LUSTAT NOT BID, CD OR
DEALLOCATE
User response: Have your system programmer review the
system error dump for a response protocol that is not valid. Explanation: A null message (LUSTAT) can only be sent with
a BID, change direction (CD), or DEALLOCATE request. This
Program: CCSNAF(CS9A) message occurs when some other request is made.
Error Message: ROUTC ISSUED WITH INVALID LU62 CID System action: The entry control block (ECB) is ended.
Explanation: This message occurs when a ROUTC macro is User response: Have your system programmer review the
issued with a conversation identifier (CID) of X'00000000' or system error dump to determine the cause of the error and to
X'FFFFFFFF'. The value X'00000000' is used when a remote correct it.
logical unit (LU) allocates the conversation, and the TPF
system uses the value X'FFFFFFFF' to indicate an idle session. Error Message: ROUTC SEND STATE — INCONSISTENT
Each conversation should be assigned a unique ID that is not REQUEST
one of these values. Explanation: This message occurs when a request that is not
System action: The entry control block (ECB) is ended. valid or is not consistent is made while the program is in send
state.
User response: Have your system programmer review the
system error dump to determine the cause of the error and to System action: The entry control block (ECB) is ended.
correct it. User response: Have your system programmer review the
Error Message: ROUTC STATE CHECK — REQUEST NOT system error dump to determine the cause of the error and to
AN ALLOCATE correct it.
System Errors 85
0004A1 • 0004A7
0004A1 0004A5
Program: CCSNA2(CS10) Program: Displayed on the console and in the dump.
Error Message: INVALID OAF IN PIU Error Message: None.
Explanation: The TPF system receive a Systems Network Explanation: A data level error was found while trying to
Architecture (SNA) input message where the origin address access a node control block.
field (OAF) of the transmission header (TH) in the path
information unit (PIU) is not one of those recognized by the System action: If you request it, the TPF system returns with
TPF system. the error indicator set. Otherwise, the entry control block
(ECB) is ended.
System action: The entry control block (ECB) is exited.
User response: Have your system programmer review the
User response: Have your system programmer review the
system error dump to determine the cause of the error and to
system error dump for the origin address field (OAF).
correct it. Either the parameter list pointed to by R1 indicates
a data level that is not valid or the data level is not free.
0004A2
Program: Displayed on the console and in the dump. 0004A6
Error Message: None. Program: Displayed on the console and in the dump.
Explanation: The requested command is not valid. CSCD Error Message: VALIDATION ERROR IN
determined that the requested command was not valid for one RVT1,RVT2,SAT,SRT,CCB,SCB1, OR SCB2
of these reasons:
Explanation: The Systems Network Architecture (SNA)
v It is not valid for DFC or internal system services control
keypoint program detected that the validity pattern in a SNA
point (SSCP) services
record is broken. This is a serious error since a crucial system
v It is not found in the Systems Network Architecture (SNA) record was altered inadvertently.
command table
System action: The TPF system is IPLed again.
v It is not valid for the indicated device.
User response: Do the following:
System action: A system error is issued and is returned to
the calling module with the error indicator set. 1. Correct the program that is inadvertently altering the SNA
record.
User response: Review the system error dump for a
2. Reload the SNA pilot tape by issuing the ZSLDR or
command that is not valid.
ZNOPL command.
3. IPL the TPF system again.
0004A3
You can use the macro trace table in the dump to determine See TPF ACF/SNA Data Communications Reference for more
whether the error was due to an address retrieval or record information about performing a fresh load. See TPF ACF/SNA
file problem. Network Generation for more information about the SNAKEY
macro.
0004A8
0004A9
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: INSUFFICIENT SPACE IN CORE FOR xxxx
Error Message: One of the following:
Where:
VALIDATION ERROR IN xxxx
xxxx
NO AVAILABLE SLOTS IN xxxx
One of the following:
Where:
ANT Application name table
xxxx
RVT1 Resource vector table — part 1
One of the following:
RVT2 Resource vector table — part 2
CCB Conversation control block
SAT Subarea address table
RVT1 Resource vector table — part 1
SRT System recovery table
RVT2 Resource vector table — part 2
NAT Network address table
SAT Subarea address table
CCB Conversation control block
SRT System recovery table
SCB1 Session control block — part 1
SCB1 Session control block — part 1
SCB2 Session control block — part 2
SCB2 Session control block — part 2
RTP Rapid transport protocol control block (RTPCB)
RTP Rapid transport protocol control block (RTPCB)
table
table.
HPSA High-performance routing session address table
Explanation: Each entry in the Systems Network Architecture
(HPRSAT)
(SNA) tables that were previously listed has a bit referred to
HPMT High-performance routing message table as the validity bit. The pattern for these bits is an ON/OFF
(HPRMT). alternating sequence for each entry. These bits are used to
detect the inadvertent alteration of any of the SNA tables. The
Explanation: The communications restart programs detected error occurred when the broken bit pattern was found while
one of the following conditions: the SNA restart programs read that table into main storage.
v Control program initialization did not reserve enough main
System action: If an error occurs during system recovery
storage for the specified table.
table (SRT) processing (due to validity checking or because no
v The size of the RVT was decreased without performing a SRT slots are available), fresh load processing is activated
fresh load. immediately, which allows the restart schedule to complete. In
System action: A system error is issued and processing for either case, recoverable messages and file records associated
this record type is ended. The RESTART ABORTED STATE with those messages are lost.
CHANGE DISABLED message may be printed and the restart For all other conditions, the fresh load indicator is set and the
schedule is abnormally ended. restart schedule is ended. The fresh load process is activated
If the error occurred during system recovery table (SRT) again with the next IPL.
processing, fresh load processing is activated immediately, User response: Review the system error dump to determine
allowing the restart schedule to complete normally. the cause of the error and correct it.
User response: Do one of the following: R3 on the dump contains the starting address of the entry
v If you decreased the size of the RVT, perform a fresh load. whose validity bit was altered. If file corruption is involved, it
v If this error occurred for the NAT, RVT1, and RVT2 tables may be necessary to reload the SNA data pilot tape.
while performing a fresh load, the error may indicate that When the NO AVAILABLE SLOTS IN THE SR0RT condition is
these tables are not large enough to accommodate the detected, one or more of the following actions may be
number of resources being loaded by using the offline necessary:
ACF/SNA table generation (OSTG) program. Increase the
v Adjust the shutdown levels for communications to reduce
size of these tables in keypoint 2 (CTK2) by using the
the number of messages being processed by the TPF system
SNAKEY macro.
at one time. This is a short-term solution.
v Have your system programmer review the system error
v Increase the size of the system recovery table (SRT) to
dump to determine the cause of the error and to correct it.
accommodate the level of SNA recoverable message traffic
(the number of SRT slots and the number of SRT records on
file).
System Errors 87
0004AA • 0004AE
SCB2 Session control block — part 2 System action: A system error is issued, the main storage
blocks that contain the PIU are returned to the TPF system,
RTP1 Rapid transport protocol control block (RTPCB) and the read is ignored.
table — part 1
User response: None.
RTP2 RTPCB table — part 2.
Error Message: INPUT PIU INVALID — GREATER THAN
yyy The ordinal number 4K
Explanation: The Systems Network Architecture (SNA) Explanation: The Systems Network Architecture (SNA) read
restart programs detected an error because one of the a path information unit (PIU) from a 37x5 that was larger than
following errors occurred: the largest message that could fit into a 4K block.
v An error return from the file address retrieval program System action: A system error is issued, the main storage
(FACS) blocks that contain the PIU are returned to the TPF system,
v An error return from an attempt to find or file the indicated and the read is ignored.
record.
User response: The bind image for a logical unit (LU) should
System action: A system error is issued and processing for not exceed 4K bytes.
this record type is ended. The RESTART ABORTED STATE
CHANGE DISABLED message may be printed and the restart R4 contains the PIU size that is not valid and R1 contains a
schedule is ended abnormally. An indicator is set to force pointer to the PIU itself.
restart to process fresh load processing during the next IPL. Error Message: INPUT PIU INVALID — DCF EQUAL 0
If the error occurred during SRT processing, fresh load Explanation: The Systems Network Architecture (SNA) read
processing is activated immediately, which allows the restart a path information unit (PIU) from a 37x5 that has a data
schedule to complete normally. count field equal to zero.
User response: Do one of the following: System action: A system error is issued, the main storage
v For a file address retrieval error, have your system blocks containing the PIU are returned to the TPF system, and
programmer verify that enough records were allocated for the read is ignored.
the record that is in error.
User response: None.
v For FILE and FIND errors, you can move the disk pack
involved or perform a copy pack operation. In addition, for
FIND errors, if an ID check failure occurred, it may be 0004AE
necessary to load the SNA pilot tape again.
Program: Displayed on the console and in the dump.
Use the macro trace table in the dump to determine the cause Error Message: SYSGEN/OSTG ERROR — NO RVT ENTRY
of the error. FOR THIS HOST
Explanation: The Systems Network Architecture (SNA)
restart processing was unable to find the RVT1 entry for this
host. This is a serious error since without the host RVT, the
system services control point (SSCP) network address cannot system error dump to determine which application is sending
be obtained. the wrong size message.
0004B1
0004B6
Program: CCSNA3(CS96), CCCCP1(CLXA)
Program: CCSNA3 (CS96)
Error Message: INVALID NCP OR RID
Error Message: OUTPUT SENT WITH NO INPUT IN SRT
Explanation: The Network Control Program (NCP) or the
resource identifier (RID) is not valid. Explanation: This message is self-explanatory.
System action: The program is exited. System action: The message is discarded.
User response: None. User response: The program must be changed to zero the
system recovery table (SRT) reference number in the routing
control parameter list (RCPL).
0004B2
System Errors 89
0004BA • 0004C0
could not read the message on file. User response: Review the system error dump to determine
the cause of the error and to correct it. You can use the system
System action: The logical unit (LU) is stopped by the error dump to determine which program issued the ROUTC
program. macro that caused the system error. This program should be
User response: None. checked to determine and correct the reason for the condition
that is not valid.
0004BA
0004BE
Program: Displayed on the console and in the dump.
Program: CCSNA3 (CS96)
Error Message: OUTPUT WAS NOT FILED
Error Message: INVALID RCPL FORMAT
Explanation: There was an error because the output was not
filed. Explanation: An application program segment that issued a
ROUTC macro to a node that was defined as a batch logical
System action: The logical unit (LU) is stopped by the unit (LU) failed to provide a routing control parameter list
program. (RCPL) in the expanded format.
User response: None. System action: A system error is issued and is exited.
0004BD 0004C0
Program: CCSNA3 (CS96) Program: Displayed on the console and in the dump.
Error Message: INVALID CORE BLOCK SIZE SUPPLIED Error Message: No message or one of the following:
W/ROUTC v FIND ERROR
v NCB RETRIEVAL ERROR
Explanation: A user issued the ROUTC macro and the
routing control parameter list (RCPL) indicates a file address Explanation: A FACE, FIND, or parameter error was detected
was supplied in the file address reference word (FARW) on during the retrieval of a network control block (NCB) by the
the specified level. The control program (CP) CLXA segment Systems Network Architecture SNA GETNCB segment.
checked the associated CBRW and found that it contains a System action: GET NCB processing for this record is ended.
128-byte main storage block. Processing continues or ends depending on the function being
System action: The previous system error is issued and the performed.
ECB is exited. User response: Have your system programmer review the
R14=1 if there was a resource identifier (RID) conversion error, Program: CCSNA2 (CS90)
for example, the RID was not defined.
Error Message: LU EXCEEDS 256 SRT SLOTS.
R14=2 if the RID was for a node other than an SNA logical
Explanation: The processing of a recoverable Systems
unit (LU).
Network Architecture (SNA) message for a multi-thread
logical unit (LU) in CS09 has determined that the maximum
System Errors 91
0004CC • 0004D6
number of SRT slots for this LU system recover table (SRT) Have your system programmer also check the data in the
slots for this LU was reached. main storage block since it may be possible that another
program is storing data erroneously in this main storage
System action: The entry control block (ECB) is exited. block. The address of the PIU in error is contained in the
User response: Review the system error dump to determine CE1CR0 field of the ECB.
the cause of the problem and to correct it. Have your system
programmer check the output queues to determine whether
0004CE
processing is being delayed by a line failure or a problem
segment. Also, be aware of shutdown levels. Program: CCSNA2 (CS55)
to a 37x5 and the interrupt was processed by the CCSNA1 Explanation: The channel command received was not valid.
CS03 copy segment.
System action: A catastrophic system error is issued.
The address field in the CSW points to the second read CCW
User response: IPL the TPF system again.
rather than the first. This indicates that one CCW was
processed. However, the residual byte count is equal to the
TPF UNITSZ (the size of a block for data transfer from the 0004DA
Network Control Program (NCP)) indicating that no data was
read in. Program: CCSNA1 (CS05)
If the first CCW of the read channel program, as indicated by Error Message: 3705 CHAN ERROR — CANNOT RECOVER.
information in the device operation request (DOR) block is a
Explanation: An unrecoverable MPX channel error occurred.
read (X'02') instead of a read start (X'32' or X'52'), this could be
an error in the read channel program of the TPF system. System action: A system error is issued and control is
Another possible cause for the error is that the address of the returned to the interrupt handler.
read channel program in the DOR block is corrupted or
changed by an error in the TPF system. User response: None.
User response: You must determine whether anything is Program: CCSNA1 (CS07)
wrong with the read channel program or whether the CCW Error Message: SUBAREA ADDRESS IN RVT OR SCB IS 0
area or the DOR block was corrupted or changed by
erroneous software. An indication of what the channel Explanation: The subarea address of a resource vector table
program looked like when the start I/O was issued can be (RVT) or a session control block (SCB) for a path information
obtained from the SNADOR@ field in the CCW area. This unit (PIU) is zero.
contains the address of the DOR block. The contents of
System action: PIU core blocks are released to the TPF
DORCAW is the channel address word of the last channel
system and processing is continued.
program issued. You need to review that the channel program
pointed to by this address is accurate. User response: Have your system programmer review the
system error dump to determine the cause of the error and to
correct it.
0004D7
Error Message: DESTINATION SA AND SA IN RVT DO
Program: CCSNA1 (CS05, CS0H)
NOT MATCH
Error Message: CHANNEL PROGRAM ERROR – SDA x
Explanation: The TPF system recognized an attempt to send
Where: a path information unit (PIU) to the wrong Network Control
Program (NCP)/CTC. The destination resource does not have
x The symbolic device address (SDA). the same network subarea address as the NCP/CTC being
Explanation: A channel program check is recognized. used during SOUTC processing of the PIU.
System action: A catastrophic system error is issued. System action: PIU core blocks are released to the TPF
system and processing is continued.
User response: Your system programmer should look at the
dump to determine the cause of the channel program error User response: Have your system programmer review the
and to correct it. The I/O trace table indicates the CSW status. system error dump to determine the cause of the error and to
The CCW area pointed to by R2 is also helpful for diagnosis. correct it.
0004D8 0004DC
Error Message: RETRY OF SENSE ERROR UNSUCCESSFUL. Error Message: NUMBER OF CHAINED BLOCKS
EXCEEDED 8. PIU DISCARDED.
Explanation: Five attempts were made to get past a sense
error that still persists. Explanation: The 37X5 Network Control Program (NCP) I/O
support for Systems Network Architecture (SNA) can send a
System action: The Load/Dump is called, blocks are maximum of eight CCWs to the NCP with each start I/O.
returned to the TPF system, and control is returned to the
interrupt handler. If the user has a path information unit (PIU) that is main
storage chained using more than eight main storage blocks,
User response: None. the TPF system cannot build the CCW to send it.
System Errors 93
0004DD • 0004E0
blocks are 381 or 128 in size, a larger main storage block size
0004DF
may be used to contain the PIU.
Program: CSX5
R3 in the dump points to the beginning of the first block of
the PIU. The chaining convention used is described in Error Message: ERROR RECEIVED DURING XID.
(SOUTC).
Explanation: During the Network Control Program (NCP)
channel contact processing, an XID format 2 I-field was
0004DD received from NCP with an error indicator set. It is probable
that there is a mismatch between the TPF definition and the
Program: Displayed on the console and in the dump.
NCP generation on the host parameters.
Error Message: CHAIN OF AVAILABLE SRT ENTRIES IS
System action: A system error is issued. The channel contact
NOT VALID.
sequence is ended.
Explanation: During a system services control point (SSCP)
User response: Have your system programmer review the
restart, the chain of system recovery table (SRT) entries were
system error dump for the error status (byte 18) in the XID 2
identified as not valid. Either the end of the chain was not
I-field to determine the cause of the error and to correct it.
delineated or one of the pointers to the next entry in the chain
was set to an incorrect value. See TPF ACF/SNA Data Communications Reference for more
information about the FID4 considerations and a description
System action: A system error is issued and a fresh copy of
of the TPF XID.
the Systems Network Architecture (SNA) tables is loaded. All
messages that were previously in the SRT are lost.
0004DF
User response: Have your system programmer review the
system error dump to determine the cause of the error and to Program: CSX6
correct it.
Error Message: ERROR RECEIVED DURING CTC XID.
Note: The content of the SRT are included in the section of Explanation: During CTC channel contact processing, one of
the dump labelled as user defined. R5 contains the the following errors occurred:
address of the SRT. v An XID format 2 I-field was received from the CTC with an
error indicator set
0004DE v There was an error processing the I-field that was received.
Program: CCSNAB (CS70)
It is probable that there is a mismatch between the TPF
Error Message: BRACKET PROTOCOL VIOLATION – definitions and the VTAM definitions or differences between
SESSION TERMINATED definitions in this TPF system and the other TPF system, if the
connection is a TPF-to-TPF connection. The content of the XID
Explanation: An error occurred because the begin and end
I-field and the read header are dumped as SLIST parameters
brackets are unmatched.
in this dump. These fields show up as USER SPECIFIED
System action: The communication session is ended. AREAS.
User response: Do the following: System action: A system error is issued. The channel contact
sequence is ended.
1. Review the path information unit (PIU) and the system
error dump to determine the cause of the error. User response: Have your system programmer review the
2. Correct the error. system error dump for the error status (byte 18) in the XID 2
I-field to determine the cause of the error and to correct it.
3. Bring up the session again.
If the I-field does not indicate the error, then review the SAT,
the RVT, and so on of the CTC link as a possible cause of the
0004DF
error. The I/O trace table entries indicate that the CSW status
Program: CSX3 returned. The CCW area pointed to by R2 also helps in the
diagnosis.
Error Message: CONTROL VECTOR 22 SENT/RECEIVED
DURING XID
0004E0
Explanation: During adjacent link station (ALS) channel
contact processing, an XID format 3 I-field was received from Program: Displayed on the console and in the dump.
the Network Control Program (NCP) with XID Negotiation
Error Message: OMT — NCB FIND/FILE ERR (NC0CB)
Error control vector X'22'. It is probable that there is a
mismatch between the TPF definition and the NCP generation Explanation: An I/O error occurred following a find or file
on the host parameters. request for the node control block.
System action: A system error is issued. The channel contact System action: A system error is issued and the active
sequence is ended and the ECB is exited. session is ended.
User response: Have your system programmer review the User response: Move the DASD packs involved and start the
system error dump for control vector 22 in the XID 3 I-field to nodes affected. For persistent errors, a copy pack operation
determine the cause of the error and to correct it. should be performed and the node control block (NCB) for the
affected nodes initialized with the ZNNCB command without System action: The program discards the message and
the purge options. The nodes should then be started. returns to the caller.
User response: Have your system programmer review the
0004E1 system error dump to determine the cause of the error and to
correct it.
Program: Displayed on the console and in the dump.
Explanation: A software I/O error occurred following a find User response: Review the system error dump to determine
request for an overflow segment of a multi-segment message. why the system is waiting for a pacing response.
User response: Have your system programmer review the Program: Displayed on the console and in the dump.
system error dump to determine whether a software error Error Message: None.
occurred and then take the appropriate action.
Explanation: The TPF system was unable to get the resource
vector table (RVT) address from the resource identifier (RID)
0004E4 routine.
Program: Displayed on the console and in the dump. System action: None.
Error Message: None. User response: None.
Explanation: There are bad pointers in the node control block
(NCB). 0004EA
System action: The program resets the queue of the NCB to Program: Displayed on the console and in the dump.
zero.
Error Message: PIU RETRIEVAL ERROR
User response: None.
Explanation: A FIND error was detected during the retrieval
of the path information unit (PIU).
0004E5
System action: A system error is issued and the program is
Program: Displayed on the console and in the dump. exited.
Error Message: None. User response: Have your system programmer review the
Explanation: A message length that is not valid was detected system error dump to determine the cause of the error and to
in the message header. correct it.
System Errors 95
0004EC • 0004F6
User response: Have your system programmer review the Program: Displayed on the console and in the dump.
coding of the SNAKEY macro for generation of keypoint 2
Error Message: None.
(CTK2). The MAXALS parameter determines the maximum
number of Network Control Programs (NCPs) that can be Explanation: A transmission header that is not valid was
active at any one time and, therefore, the number of CCW recognized by the TPF system.
areas generated for the system. This parameter should be
increased, the new keypoint should be loaded into the TPF System action: For a batch logical unit (LU), the message is
system, and the TPF system IPLed before continuing. sent again. Otherwise, control is returned to the interrupt
handler.
User response: Have your system programmer review the Program: CSX7
consoles for previous communications related errors. Error Message: REQUEST TO RELEASE INACTIVE CCW
Program: CCSNA4 (CS0E) Explanation: The address of a CCW area not in use was
Error Message: CS0E RVT LOCK TIME-OUT. passed to the release CCW routine.
Explanation: RVTSCAN processing attempted to build a System action: Control is returned to the calling program.
Systems Network Architecture (SNA) path information unit User response: Have your system programmer review the
(PIU) for a data flow control (DFC) command and waited system error dump to determine cause of the error and to
more than 1 second to obtain the resource vector table (RVT) correct it.
lock of the associated logical unit (LU) that is used to serialize
SOUTC macro queuing. Error Message: INVALID CW0CC ADDRESS
System action: A SNAP dump is issued and processing is Explanation: A Systems Network Architecture (SNA) channel
continued without obtaining the RVT lock. The current ECB command work area address that is not valid was passed to
releases the lock when control is returned from SOUTC macro the release CW0CC routine.
queuing. The RVT lock remains on when an ECB abends
System action: Control is returned to the calling program.
during SOUTC macro queuing.
User response: Have your system programmer review the
User response: Have your system programmer review the
system error dump to determine cause of the error and to
consoles for previous communications-related errors.
correct it.
0004F1
0004F6
Program: Displayed on the console and in the dump.
Program: CSX7
Error Message: PROTOCOL VIOLATION ERROR
Error Message: INVALID SNA BUFFER ADDRESS
Explanation: There was a protocol violation (for example,
Explanation: A Systems Network Architecture (SNA) buffer
sense data that is not valid), or the length in the 3614 message
address that is not valid was passed to the release buffer
is not valid.
routine.
System action: Control is returned to the calling program. the cause of the error and to correct it. In the dump, R4
contains the hexadecimal value of the message number to be
User response: Have your system programmer review the sent to the console. This must be within the range limits
system error dump to determine cause of the error and to specified in CSDK.
correct it.
000504
0004F7
Program: Displayed on the console and in the dump.
Program: CS07
Error Message: INVALID DVTYP IN RVT.
Error Message: OUTPUT PIU SIZE EXCEEDS CTC BUFFER
Explanation: System services control point (SSCP) —
Explanation: The size of a chained output path information
Message handler CSEL segment found an unrecognizable
unit (PIU) exceeds the size of the channel-to-channel (CTC)
Systems Network Architecture (SNA) device type in the
link write buffer.
requested network addressable units (NAUs) (ZNETW
System action: The output PIU is discarded. request) RVT1 entry.
User response: Have your system programmer increase the System action: A system error is issued. Then, control is
size of the write buffer. The write buffer size, which equals the returned to the calling program.
size of the remote system read buffer, is determined during
User response: Inspect the relevant resource vector table
XID processing.
(RVT) (the RVT address is in EBW0028 of system error dump)
for possible data corruption. Inspect all programs accessing
the RVT1 table.
000500–0005FF
000506
000500
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: NCP CONFIGURATION INCONSISTENT
Error Message: None. RID CONVERSION ERROR INVALID WITH TPF TABLES.
RID INVALID RVTCC INPUT RIDCC ERROR LU62-
INVALID RID OR SCIB-ID Explanation: The NCPGEN/TPF tables are inconsistent. A
resource is not known to the Network Control Program (NCP)
Explanation: You may not receive an error message or you
generation; for example, a command as issued with a
might receive any of the other error messages listed above for
command code that is not valid. (Activate link sent to a logical
this explanation. A parameter that is not valid was found
unit.)
while calculating a Systems Network Architecture (SNA) table
address. Potential parameters that are not valid are: System action: If the response was received from an NCP or
v RID cluster, a system error is issued and the ECB is exited.
v RVT1 If the response is a -FME with sense code 0806, the command
v RVT2 is sent again. On the second occurrence, the system error is
v SAT issued and a deactivation of the network addressable unit
(NAU) is forced.
v PLIT
v SCBID User response: Review the system error dump to determine
the cause of the error and to correct it.
v SCB1
v SCB2 The resource vector table (RVT) information and the path
information unit (PIU) trace data can be used to determine the
v Network addresses. problem. RVT data will be in block on level 6. PIU trace data
System action: A system error dump is issued and the ECB is on RTL. The PIU trace is available only when the trace
may be exited. function is activated.
System Errors 97
000510 • 000516
System action: For the first occurrence of the problem, resend Level 0 of the dump contains the path information unit (PIU)
the block, assuming it may have been destroyed by an for determining the actual command received.
application program.
If the problem continues and this is the second occurrence, 000514
issue a system error and force the deactivation of the NAU, if
it is active. Program: Displayed on the console and in the dump.
The previous actions may vary depending on the command Error Message: None.
and sense code. In some cases the action will be to clean up Explanation: There was an unsupported session control or
the NAU and its subordinate resources and, where applicable, data flow control command. A session control or data flow
notify the owning CDRM. control command response or request that is not supported by
User response: Review the system error dump to determine the TPF system was found.
the cause of the error and to correct it. System action: A system error is issued and the entry control
The resource vector table (RVT) information and the path block (ECB) exits.
information unit (PIU) trace data can be used to determine the User response: Review the system error dump to determine
problem. RVT data will be in the block on level 6. PIU trace the cause of the error and to correct it.
data is on RTL. The PIU trace is available only when the trace
function is activated. Level 0 of the dump contains the path information unit (PIU)
for determining the actual command received.
000510
000515
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Explanation: The NCST conflict checking routine cannot find
the controlling network addressable unit (NAU) of the Error Message: None.
NCSRID.
Explanation: A system services control point (SSCP) or
System action: A system error is issued and is exited. session control command timed out before receiving a valid
response.
User response: Review the system error dump to determine
the cause of the error and to correct it. In addition, review the System action: If the timeout occurred right after a hardware
register containing the resource vector table (RVT) address that IPL, the TPF system resends once before any action is taken.
was input to the conflict checking routine.
If the timeout occurred during session initiation, then
termination proceedings are started for the network
000511 addressable unit (NAU) and all of its subordinate resources.
Program: Displayed on the console and in the dump. If the timeout occurred during session termination, one of two
actions may occur:
Error Message: NEGATIVE RESPONSE RECEIVED
v The next Systems Network Architecture (SNA) command
Explanation: This is the default dump for all negative needed to complete the session termination is sent.
responses that are received. v Cleanup occurs (when there is no other command to send).
System action: A system error is issued and the deactivation User response: Review the system error dump to determine
of the network addressable unit (NAU) is forced. the cause of the error and to correct it.
User response: Review the system error dump to determine The resource vector table (RVT) information and the path
the cause of the error and to correct it. information unit (PIU) trace data can be used to determine the
The resource vector table (RVT) information and the path problem. RVT data will be in the block on level 6. PIU trace
information unit (PIU) trace data can be used to determine the data is on RTL. The PIU trace is available only when the trace
problem. RVT data is included in the dump. PIU trace data is function is activated.
on RTL. The PIU trace is available only when the trace
function is activated. 000516
Program: Displayed on the console and in the dump.
000512
Error Message: None.
Program: Displayed on the console and in the dump.
Explanation: There was a shutdown conflict. A response to a
Error Message: None. chase command was received and the logical unit (LU) was
Explanation: There was an unsupported network services not in a shutdown sequence.
command. A network services command response or request System action: A system error is issued and the ECB is
that is not supported by the TPF system was found. exited.
System action: A system error is issued and the entry control User response: Review the system error dump to determine
block (ECB) exits. the cause of the error and to correct it.
User response: Review the system error dump to determine The resource vector table (RVT) information and the path
the cause of the error and to correct it.
information unit (PIU) trace data can be used to determine the System action: A system error dump is issued. Processing is
problem. RVT data will be in the block on level 6. PIU trace continued with the next item.
data is on RTL. The PIU trace is available only when the trace
User response: Review the system error dump to determine
function is activated.
the cause of the error and to correct it.
No match was found in the routing control application table.
000520
ARPT uses the RCPL origin (RCPLORG in RC0AT) as input
Program: CSCP for the application name match when a timeout occurs.
000535
000531
Program: CVNI
Program: ARP1
Error Message: ERROR RETRIEVAL ON RANDOM
Error Message: FACE ERROR NUMBER TABLE
Explanation: An error code was returned by the file access Explanation: An error occurred while CVN was trying to
compute program (FACE) when ARPK was trying to compute retrieve the random number table with the FINWC macro.
the file address of the application recovery table (AR0RT).
System action: A system error dump is issued. Release level
System action: A system error dump is issued and the 6 if the block is held and BACKC to CTKS.
program is exited. Keypointing of the ART record does not
continue. User response: Review the system error dump to determine
the cause of the error and to correct it.
User response: Review the system error dump to determine
the cause of the error and to correct it. CE1SUG identifies the cause of the error.
Error Message: UNABLE TO RETURN TO APPLICATION Explanation: The VR sequence number in the path
information unit (PIU) received by the Network Control
Explanation: ARPT was unable to return the message to the Program (NCP) is skipped, which causes the traffic to this
application program because the origin field in the routing NCP to be held.
control parameter list (RCPL) did not match any entry in the
routing control application table. System action: A system error is issued. For the next PIU, the
System Errors 99
00053A • 00054B
correct VR sequence number is used and the pacing request is v There is a buffer control area that is not valid on the reserve
enforced so that traffic to the NCP can be resumed. list.
User response: Review the system error dump to determine System action: A catastrophic system error is issued.
the cause of the error and to correct it.
User response: Use the system error dump to determine the
events that occurred immediately before the error.
00053A
Program: Displayed on the console and in the dump. 000544
000541 This dump is taken when an error is found on return from the
RIDCC macro.
Program: CVF4
System action: If the origin RID is valid, the message is
Error Message: DBI NOT FOUND IN VFA's SSTABLE
returned to the originator of the message with the Returned
Explanation: The database ID was not found in the virtual Message indicator set in the RCPL. Otherwise, processing
file access (VFA) subsystem table. ends.
System action: A system error is issued and the entry control User response: The program that issued the ROUTC macro
block (ECB) exits. must be corrected to move the correct RID into the RCPL.
User response: Review the system error dump to determine R2 contains the address of the RCPL in error.
why the ECB database ID is not valid. Use the dump to try to
determine why the VFA aging list was corrupted.
00054B
Program: Displayed on the console and in the dump.
000542
Error Message: None.
Program: CVF3
Explanation: The destination logical unit (LU) in the ROUTC
Error Message: VFA INTEGRITY LOST
macro is for a SNA functional management message router
Explanation: This error is issued whenever one of the (FMMR). A valid destination type is a type-P LU.
following occurs:
System action: The processing is ended.
v CCSONS calls to reset the write active on a buffer control
area that is not set. User response: None.
v The $GSVAC macro is not successful.
100 TPF Messages (System Error, Offline, and Program Status Word)
00054C • 000571
if lock trace is active, determine who issued the original lock removing the PAUSC FUNC=END.
request.
000578
000572
Program: Displayed on the console and in the dump.
Program: Displayed in the dump.
Error Message: ECB ALREADY PAUSED
Error Message: None.
Explanation: A PAUSC macro with a BEGIN request was
Explanation: An attempt to lock a lockword determined that invoked even though a BEGIN request was already made.
the lock is already held by the I-stream attempting the lock. Instruction streams are already paused and they cannot be
paused again.
System action: A system error is issued and the TPF system
is returned to the next sequential instruction. System action: A system error is issued and the program
continues.
User response: Have your system programmer review the
system error dump to determine which code locked the User response: Have your system programmer review the
lockword on the current I-stream. system error dump to determine which program requested the
PAUSC macro. The program can be corrected by removing the
PAUSC FUNC=BEGIN or by adding a prior PAUSC
000573 FUNC=END.
Program: Displayed in the dump.
User response: Have your system programmer determine Error Message: One of the following:
which program requested the PAUSC macro. The program can v ECB ISSUED SWISC ENTER WITH SYSTEM PAUSED
be corrected by adding a PAUSC FUNC=BEGIN or by
102 TPF Messages (System Error, Offline, and Program Status Word)
000581 • 000587
000581
000584
Program: Displayed in the dump.
Program: CCIISC (CCE7)
Error Message: One of the following:
Error Message: I-STREAM UTILIZATION COMPUTATION
v SWISC WITH INVALID I-STREAM NUMBER
FAILED
v SWISC WITH INVALID LIST PARAMETER
Explanation: Due to an overflow condition or an unexpected
v SWISC CREATE: R14 DATA LENGTH EXCEEDS 104
negative counter, the I-stream utilization computation for this
v SWISC CREATE: INVALID CBRW OR CBRW POINTER invocation of the scheduler is not possible for the second time
v SWISC CREATE: CBRW IN DECB NOT VALID in a row.
Explanation: A SWISC macro was issued from an ECB System action: The TPF system dumps every second time in
program with parameters that are not valid: a row that the I-stream utilization computation fails. The
variables are reset and a return is made to the central
v A valid target instruction stream was not specified.
processing unit (CPU) loop.
v A valid target central processing unit (CPU) list (#CLHRDY,
#CLHINP, or #CLHDEF) was not specified. User response: Have your system programmer review the
system error dump to determine which variable is in error and
v The passed data length was greater than the maximum of
where the problem was detected.
104 bytes.
v The LEV parameter did not point to a core block reference
word (CBRW) or the CBRW indicators were not valid. 000585
v The CBRW indicators were not valid in the data event Program: CCIISC (CCE3)
control block (DECB) specified for the DECB parameter.
Error Message: PAUSC SYNC FUNCTION ALREADY
System action: A system error is issued and the entry control ACTIVE
block (ECB) exits.
Explanation: A PAUSC macro was issued with the clock sync
User response: Have your system programmer review the function (FUNC=SYNC), but another clock sync request was
PSWs in the system error dump to determine where the already active.
SWISC macro was issued from.
System action: A system error is issued and the entry control
See TPF System Macros for more information about the SWISC block (ECB) that issued the PAUSC macro exits.
macro.
User response: Have your system programmer review the
system error dump to determine which programs issued the
000582 PAUSC macros and why the programs were processing at the
same time.
Program: Displayed on the console and in the dump.
$RECVC macro or adding a $RECVC EP=RESET before exiting System action: A system error is issued and processing is
the ECB. exited.
User response: Review the system error dump to determine
000588 the cause of the error by locating the main storage block at the
specified level and correct the error. It is possible that the file
Program: CCNUCL (CTME) address does not belong to the current allocator or the record
type is not valid.
Error Message: None.
Explanation: During CTL-000010 processing a PAUSC BEGIN
000651
command is entered on the main I-stream, and an excessive
amount of time passes without response from the I-stream. Program: CNPN
System action: A system error is issued and the ECB exits. Error Message: PROT COUNT ERROR
User response: Have your system programmer review the Explanation: The entry count field in the PROT record is not
system error dump to determine which program was running synchronized with the actual number of entries in the PROT
too long and why. table.
System action: A system error is issued and the program is
exited.
000600–00069F
User response: Review the system error dump to determine
the cause of the error and to correct it. It is possible that the
000600 main storage in the entry count field is corrupted. Determine
the exact count of entries in the table and correct the entry
Program: CIPT, CIPU count field or build the PROT table again if it is corrupted.
Error Message: None. Error Message: UNKNOWN MESSAGE NUMBER
Explanation: There was an error in the file address compute Explanation: The message number that was inputted to the
program (FACE) while locating the system allocator (SAL) CNPN segment in R0 is not valid. The message number is
table record. either greater than the maximum value defined in the CNPN
System action: A system error is issued and is exited. segment or the message number is within range but it is for a
message number that is currently unused.
User response: Allocate the #SALTB record type in the FACE
table. System action: A system error is issued and the program is
exited.
Explanation: FIND and WAIT found an error while trying to User response: Review the data record that is causing the
read an online system allocator (SAL) record from tape. problem to determine the cause of the error and to correct it.
System action: A system error is issued and is exited. To start SSOR initialization again, cycle the subsystem from
1052 state to NORM state.
User response: Create the SAL table again on another tape.
000653
000650
Program: Displayed on the console and in the dump.
Program: CNPN
Error Message: UNABLE TO FIND WGTA FOR UAT
Error Message: PROT FILE ERROR TERMINAL ENTRY
Explanation: A FIND was issued on a data level that is Explanation: A subsystem UAT terminal entry was found for
already holding a block or there are no main storage blocks which there is no matching WGTA entry.
available.
System action: The subsystem UAT terminal entry is skipped
104 TPF Messages (System Error, Offline, and Program Status Word)
000659 • 00066B
and processing is continued with the next entry. This error occurs when the CEBIC macro service routine is
interrupted while servicing a CP CEBIC macro request, and a
User response: Determine why the subsystem UAT terminal
CEBIC macro is again issued by a CP segment before the
entry does not appear in the TPF system's WGTA table.
original CEBIC service is completed.
R4 contains a pointer to the subsystem UAT terminal entry
System action: A catastrophic system error is issued.
that is in error. This is a database problem. All subsystem UAT
terminal entries should have matching entries in the basic User response: This error should not occur. Verify that an
subsystem’s UAT and WGTA table. interrupt handler routine or an interrupt driven CP segment is
not issuing a CEBIC macro call.
000659 The CEBIC CP register save area is located at label
Program: CICR, CPSE CEBCPREG in the CCCSAS CSECT. The address from where
the first CEBIC macro was issued is 4 bytes before the address
Error Message: INVALID DBI IN ECB stored in the first fullword of this save area.
Explanation: The control program detected a database
indicator in the entry control block (ECB) that is not valid. 00066A
System action: The ECB is ended. Program: CEBM
User response: Review the CE1DBI field in the current ECB Error Message: MDBF ID OUT OF RANGE
to validate the:
v Format (byte 0 is a complement of byte 1) Explanation: Each time the TPF system is IPLed, SS and SSU
ordinal numbers are assigned sequentially. This error occurs
v Range (byte 1) is not larger than the number of active
when the DBI/SSU to be changed or the DBI/SSU to be
subsystems.
restored references a DBI/SSU that was not included in the
last IPL.
00065D System action: For E-type programs, a system error is issued
Program: Displayed on the console and in the dump. and the entry control block (ECB) exits.
Error Message: FILE COPY EOJ UNABLE TO SWAP MODS For C-type programs, branch to the user exit label supplied in
the ERR parameter on the CEBIC macro call.
Appended Message: SON I/O UNABLE TO SWAP MODS
FOR COPY EOJ PROCESSING User response: Correct the SS/SSU ID that is not valid. Use
the system error dump to determine which SS/SSU ID is in
Explanation: The CYPL segment signalled the DASD I/O to error.
swap the TO and FROM modules to complete an ALL-FILE
copy. The DASD I/O was unable to perform the request. CE1DBI/CE1SSU are the IDs to be changed; R14 of the
CPREG specified on the macro call contains the SS/SSU ID
System action: A catastrophic system error is issued. that needs to be changed; CE1SDBI/CE1SDBI+2 are the IDs
that need to be restored.
User response: Review the main storage dump to determine
why the DASD I/O was unable to complete the module swap. The number of SS/SSUs included in the last IPL can be
obtained by using the SSA and SSU labels, respectively, in the
The DASD I/O would have issued a 000038 system error
dump and keypoint M. See the MK0CK data macro for more
when unable to do the swap. This dump should be used for
information.
problem determination.
00066B
00065E
Program: CEBM
Program: CICR
Error Message: SUBSYSTEM INACTIVE
Error Message: None.
Explanation: The DBI to be changed, the DBI to be changed
Explanation: The ALASC macro was processed while already
to, the parent SS of the SSU to be changed to, or the DBI to be
holding an auto storage block for this program level.
restored was included in the last IPL but was made inactive
System action: A system error is issued and the entry control through the PSMS package.
block (ECB) exits.
System action: For E-type programs, a system error is issued
User response: Review the system error dump to determine and the entry control block (ECB) exits.
the cause of the error and to correct it. It is possible that the
For C-type programs, branch to the user exit label supplied in
ALASC macro was not used properly.
the ERR parameter on the CEBIC macro call.
User response: Verify that the subsystem should be inactive.
000668
If the subsystem should no be inactive, use PSMS package to
Program: CAPT activate the subsystem and re-IPL the system.
Error Message: CEBIC REG SAVE AREA IN USE Use the system error dump to determine which SS ID is in
error. CE1DBI is the DBI to be changed, R14 or the CPREG
Explanation: The CEBIC macro was issued from a C-type specified on the macro call contains the SS/SSU ID to be
segment when the CEBIC CP register save area was in use. changed to, and CE1SDBI is the DBI to be restored.
If the ID to be changed to is an SSU ID, its parent SS can be User response: Review the system error dump to determine
obtained by referring to keypoint record m (MK0CK). the subsystem user ID located at EBX032. The subsystem user
ordinal number for this input message is determined from the
RCAT entry for the application name in the input message.
00066C
Program: CEBM 000670
Error Message: SSU RESIDES OUTSIDE SS Program: CDTD
Explanation: One of the following errors occurred: Error Message: CDTD – TASK CODE INVALID
v CE1SSU resides outside CE1DBI
Explanation: Appended message: CDTD – VALIDATE
v The SSU to be restored resides outside the DBI to be CALENDAR
restored on a DBI, R request
v The SSU to be restored resides outside the current DBI on a In CDTD, the input task code for a calendar update was found
SSU, R request. not to be valid.
System action: For E-type programs, a system error is issued System action: A system error is issued and the ECB is
and the entry control block (ECB) exits. exited.
For C-type programs, branch to the user exit label supplied in User response: Do one of the following:
the ERR parameter on the CEBIC macro call. v Determine which module called CDTB or CDTD and correct
the task code being passed.
User response: Correct the reference that is not valid.
v Validate the global calendar.
Use the system error dump to determine which ID is in error. v Validate the subsystem clock record.
CE1DBI/CE1SSU are the current IDs and
CE1SDBI/CE1SDBI+2 are the IDs to be restored. v Review the main storage dump to determine the task input
for CDTB/CDTD.
00066D
000671
Program: CUBM
Program: CDTD
Error Message: MDBF ID IS NOT AVAILABLE
Error Message: CDTD – INVALID INPUT TO CDTA
Explanation: One of the following errors occurred:
Explanation: Appended message: CDTD — VALIDATE
v The specified SS is indicated as inactive in CTKM
CALENDAR
v The parent SS of the specified SSU is indicated as inactive in
CTKM When CDTD called CDTA, the local standard time date field
or the Greenwich Mean Time date field was not a valid date
v The specified SSU is dormant. according to the calendar.
System action: Branch to the user exit label provided on the System action: A system error is issued and the entry control
NOTAVL parameter, if specified. If the NOTAVL user exit is
block (ECB) exits.
not provided for:
v E-type programs, a system error is issued and the entry User response: Validate the calendar.
control block (ECB) exits. Review the main storage dump to determine the:
v C-type programs, a catastrophic system error is issued. v Inputs to CDTB/CDTD
v Global date and calendar fields.
User response: If the SS is active, check why GOGO set the
SSU to dormant. Otherwise, verify that the SS should be
inactive. If the SS should not be inactive, use the PSMS 000673
package to activate the SS and re-IPL the system.
Program: CDTD, CQA2, CVFJ, CVFK
Use the system error dump to determine which ID is in error.
The location of the input SS/SSU ID is specified in the IDLOC Error Message: FACE ERR FOR SS CLOCK RECORD
parameter on the macro call. If an SSU is dormant, its global Explanation: Appended messages:
bases is set to X'FF'. v CDTD — CHECK SS CLOCK RCD
v CQA2 — CHECK SS CLOCK RCD
00066E v CVFJ — CHECK BSS CLOCK RCD
v CVFK — CHECK SS CLOCK RCD
Program: Displayed on the console and in the dump.
Error Message: None. In the CDTD, CVFJ, CVFK or CQA2 programs, FACS returned
an error code when trying to find the subsystem clock record.
Explanation: An error return was issued from issuing a
CROSC macro. The subsystem user ID passed from segment System action: A system error is issued and the entry control
XHA1 is not valid or is not available. block (ECB) exits.
System action: A system error is issued and the entry control User response: Check the file address compute program
block (ECB) exits. (FACE) for this subsystem for the subsystem clock record.
106 TPF Messages (System Error, Offline, and Program Status Word)
000674 • 000679
Review the main storage to determine the subsystem in which In CTME, when an interrupt handling routine reads the
FIND could not get to the subsystem clock record. time-of-day (TOD) clock or in a real-time segment that called
CDTG, the TOD clock was not running when it should have
000675 been running.
Error Message: CVFJ — CANNOT FIND PGM xxxx User response: Determine why the TOD clock was not
running. Check with the system operators.
Where:
xxxx 000679
The program name.
Program: CQAK, CQAD, CQAL, CQAS
Explanation: Appended messages:
v CVFJ — CANNOT FIND CDTC Error Message: One of the following:
v CVFJ — CANNOT FIND CVFH v CANNOT RETRIEVE CTKI
v CVFJ — CANNOT FIND CVFI v ERROR RETRIEVING CTKI
v CTKI RETRIEVAL ERROR
In the CVFJ program, FINWC returned an error code while Explanation: An unsuccessful attempt was made to retrieve
trying to find the program specified in the message. keypoint I by using the keypoint retrieval program CYYM.
System action: A system error is issued and the cycle up System action: If the error occurred during restart or synch
entry control block (ECB) is exited. check processing, the error is catastrophic.
User response: Make sure that the program is a file-resident If the error occurred during ZDTIM processing, the request is
program on the subsystem being cycled above 1052 state. ended.
Review the main storage dump to determine the subsystem in If the error occurred while trying to synchronize to a
which FIND could not get to the program. confirmed CPC, the synchronization process is ended.
User response: Determine and correct the CTKI retrieval
000676 error. Review the error return conditions from CYYM that are
contained in EBXSW01 to determine the exact reason for the
Program: CNAV
retrieval error.
Error Message: CNAV — FACE ERR FOR BSS CLOCK REC
Program: CQAC, CQAD, CQAK, CQAM
Explanation: Appended message: CNAV — CHECK BSS
Error Message: One of the following:
CLOCK RCD
v CTKI INCORRECT ON TOD SYNC CHECK
In the CNAV program, FACS returned an error code while v UNABLE TO LOCATE SELECTION ADDRESS FOR
trying to find the BSS subsystem clock record. PROCESSOR IN KEYPOINT I
v UNABLE TO LOCATE CPUID IN KEYPOINT I
System action: A catastrophic system error is issued. v None.
User response: Check the file address compute program Explanation: The serial number, logical CPU ID, or
(FACE) table for the BSS subsystem clock record. synchronization selection address for this processor was not
found in keypoint I. This information is necessary to User response: See your IBM service representative to correct
synchronize the time-of-day (TOD) clocks in the CPC. the TOD clock hardware error.
System action: If the error occurred during restart, it is Program: CQAK, CQAL
aborted.
Error Message: None.
If the error occurred while processing a TOD synchronization
Explanation: An unsuccessful attempt was made to set the
check, the error is catastrophic.
time-of-day (TOD) clock on this CPC with the TOD clock
If the error occurred during ZATIM processing, the request is value received from a confirmed CPC.
ended.
System action: A catastrophic system error is issued.
If the error occurred while trying to synchronize to a
User response: See your IBM service representative to correct
confirmed CPC, the synchronization process is ended.
the TOD clock hardware error.
User response: Use the dump to determine the incorrect
fields in CTKI. The ZDKAT and ZDFIL online messages can
be used to determine the file address and content of keypoint 00067C
I. The ZAFIL command can be used to modify the content of Program: CQAL
keypoint I after you have determined the cause of the
problem. Error Message: MASTER TOD CLOCK NO LONGER
SYNCHRONOUS
Explanation: A time-of-day (TOD) synch check occurred and User response: Do one of the following:
the CPC could not be synchronized locally for one of the v If the .hw external--interruption code contained in the
following reasons: dump is X'1202' (external call), review the associated ECRC
v The CPC is not connected to either a TOD RPQ or a Sysplex (in CCCLHR) for possible data corruption.
Time (STR). Therefore, the synchronization check indicates v If the .hw external--interruption code contained in the
the clocks within the CPC are not synchronous internally. dump is not X'1200' or X'1202', review control register 0 to
v The CPC is connected to either a TOD RPQ or STR and ensure that the subclass mask controlling the indicated .hw
several unsuccessful attempts were made to synchronize the external--interrupt condition is not set; subclass mask bits 16
CPC locally after the TOD synchronization check occurred. and 18 are the only bits related to external interrupts that
should be set.
Note: The IBM 9037 Sysplex Timer is part of the IBM
Enterprise Systems Connection Architecture.
System action: A catastrophic system error is issued.
108 TPF Messages (System Error, Offline, and Program Status Word)
000680 • 000691
000680 000691
Program: CVAQ Program: CYEO, CYE1, CYH4
Error Message: INTERPROCESSOR COMM PARAM ERROR Error Message: UNABLE TO FIND/FILE STCCR/STPCR
Explanation: The system interprocessor communications Explanation: A pool management program found a find or
(SIPC) interface program for communication programs file error on the short-term common control records (STCCRs)
detected a parameter that is not valid in the communication or short-term processor control records (STPCRs).
SIPCC parameter area.
System action: The pool management output writer (CYE0)
System action: A system error is issued and processing is issues an irrecoverable SERRC macro with a message to the
ended. prime computer room agent set (CRAS) console.
User response: Review the entry control block (ECB) User response: Do the following:
associated with the system error dump to determine the cause 1. Analyze the associated dump.
of the error and to correct it. Either EBW000 contains a line
number, interchange address, and terminal address (LNIATA) 2. If a hardware error occurred, contact your service
representative.
that is not valid or EBW007 contains a function code that is
not valid. 3. If the problem was not caused by a hardware error, correct
the condition in the file that is causing the fine or file
EBX000 will contain the SIPCC control information, with the errors.
CPU ID of the SIPCC originator at EBX001.
Error Message: UNABLE TO FIND STCCR
Error Message: UNABLE TO FILE STPCR CYAC and CNPG segments to determine the cause of the
problem and to correct it.
Explanation: A file error occurred while a pool management
program attempted to file a short-term processor control If this condition occurred as the result of issuing a command,
record (STPCR). a solution must be found through analysis of the dump before
the command may be entered again.
System action: An irrecoverable SERRC macro with a
message is issued to the CRAS console.
000695
User response: Do the following:
1. Analyze the associated dump. Program: CYEO, CYE1
2. If a hardware error occurred, contact your service Error Message: UNABLE TO FILE CTK9
representative.
Explanation: A pool management program received an error
3. If the problem was not caused by a hardware error, correct indication from the Main Supervisor that it was unable to file
the condition in the file that is causing the file error. the pool keypoint record.
System action: The pool management output writer (CYE0)
000692 issues a catastrophic SERRC macro with a message to the
Program: CYEO, CYE1 prime computer room agent set (CRAS) console.
Error Message: ALL DIRECTORIES ARE IN USE User response: With the help of the system error dump
(paying particular attention to the contents of EBXSW1),
Explanation: The CYA2 segment of CYAO was unable to find review CYYA to determine the cause of the failure to file the
any long-term directories that do not indicate, in CY3PID(O), pool keypoint record.
an in-use condition.
System action: The pool management output writer (CYE0) 000696
issues an irrecoverable SERRC macro with a message to the
prime computer room agent set (CRAS) console. Program: CYC1 and CYA3
User response: The problem should not arise in the normal Error Message: STCCR/STPCR SHORT TERM DIRECTORY
running environment but may occur in a test system. CONTROL RECORD IN ERROR
Directory reconcile should be run to make those directories Explanation: The CYA3 segment (pool restart) or CYC1 (short
that are erroneously shown in use available to the TPF system. term directory reorder) found an error in the short-term
Review the system error dump and initiate reconciliation of master control record or short-term processor control records.
the directories. The problem may be due to the structure or because the set
size is too large.
000693 System action: The pool management output writer (CYE0)
Program: CYEO, CYE1 issues a dump, issues a message to the prime computer room
agent set (CRAS) console, and exits.
Error Message: FIND/FILE ERROR ON CYSDR
User response: Review the system error dump along with the
Explanation: There was a FIND or FILE error on CYSDR. contents of the short-term pool master control record or
short-term processor control record to determine the cause of
System action: The pool management output writer (CYE0)
the problem.
issues an irrecoverable SERRC macro with a message to the
prime computer room agent set (CRAS) console.
000697
User response: If after examining the dump it is determined
that the problem is not due to a hardware error, correct the Program: DYDS
condition existing on the online files that is causing the FIND
and FILE errors. Error Message: INVALID POOL SHUTDOWN
CONFIGURATION
110 TPF Messages (System Error, Offline, and Program Status Word)
000698 • 00069A
Explanation: A file error occurred when a pool management User response: Do the following:
program attempted to file the pool section keypoint table 1. Determine the cause of the problem by:
(CY2KT).
v Verifying that the #CY2KT fixed file record type is
System action: The pool management output writer issues an defined with enough ordinals in the FACE table.
irrecoverable SERRC macro with a message to the CRAS v Analyzing the system error dump
console.
2. Correct the problem.
User response: Do the following: 3. Restart the TPF system.
1. Using the contents of field EBXSW4 in the system error
Program: CYH1, CYH4
dump, analyze segment CYH6 to determine the cause of
the problem filing the #CY2KT fixed file record. Error Message: FACS ERROR ON STCCR
2. Correct the problem.
Explanation: An error occurred while calculating the file
3. Restart the TPF system. address for the short-term common control record (STCCR).
System action: If the system is doing a pool migration, the
000699 migration process is ended. An irrecoverable SERRC macro is
issued with a message to the prime CRAS console.
Program: CYE0, CYE1, CYH4
User response: Do the following:
Error Message: UNABLE TO FIND CYPDR
1. Determine the cause of the problem by:
Explanation: A find error occurred when a pool management
v Verifying that the #STCCR fixed file record type is
program attempted to find the SON pool descriptor record
defined with enough ordinals in the FACE table
(CYPDR).
v Analyzing the system error dump.
System action: The pool management output writer issues an
2. Correct the problem.
irrecoverable SERRC macro with a message to the prime
computer room agent set (CRAS) console. 3. Restart the TPF system.
System action: A system error dump is issued and the restart Error Message: LOGIC ERROR RETURNED BY FILE
ECB is ends with state change disabled. MANAGER
User response: Do the following: Explanation: The file manager gross error indicator
(IFMRGEI) indicates that a logic error occurred.
1. Analyze the system error dump to determine the cause of
the problem. System action: The TPF system issues an unrecoverable
2. Correct the problem. SERRC macro with a message to the prime CRAS console and
forces an IPL.
v If the error was caused by a change in the pool
configuration or set size information from when the User response: Analyze the file manager interface block to
storage was carved and when allocation was attempted, determine the cause of the error and correct the problem.
a re-IPL of the TPF system will correct the problem.
Program: CYAR
v For other causes, manually increase the aggregate set
size value stored in field CK9PCV of keypoint B. Error Message: ERROR RETURNED BY SORT UTILITY
3. Restart the TPF system. Explanation: The sort utility return code (ISRTRCD) indicates
that an error occurred during sorting.
00069C System action: The TPF system issues an unrecoverable
Program: CYAB SERRC macro with a message to the prime CRAS console and
forces an IPL.
Error Message: POOL CYCLE UP ABORTED: POOL
GENERATION REQUIRED User response: Analyze ISRTRCD to determine what caused
the error and correct the problem.
Explanation: Pool cycle-up determined that a pool generation
has not been performed for the subsystem being cycled.
System action: Pool cycle-up ends. If the subsystem being
0006A0–0006FF
cycled was the basic subsystem (BSS), a forced IPL is
performed. For other subsystems, the state change for the 0006A0
subsystem is disabled, and the subsystem is forced back to
1052 state. Program: CSYN
User response: Enter the ZPOOL GENERATION command Explanation: The ECB had an I/O pending when a SYNCC
to do pool generation for the subsystem. macro was issued.
See TPF Operations for more information about the ZPOOL System action: The ECB is exited unless the ERRTN option
GENERATION command. was coded on the SYNCC macro.
112 TPF Messages (System Error, Offline, and Program Status Word)
0006A1 • 0006A8
User response: Make sure that all I/Os are completed before
0006A4
issuing a SYNCC macro.
Program: CSYN, CPNU
0006A1 Explanation: One or more I-streams did not complete the
synchronization process within the allowed 15 seconds.
Program: CSYN
Explanation: The ECB tried to lock at a synchronizable global System action: The system issues the 6A4 dump and initiates
when it was already holding a record. an IPL.
System action: The ECB exited unless the the ERRTN option User response: Check for a problem in the load of the active
was coded on the SYNCC macro. I-streams. Deadlock, overload, and so on are possible reasons
for an I-stream not completing the synchronization in the
User response: An ECB cannot hold a record at the time a allowable time.
SYNCC macro with the LOCK option specified is processed.
0006A5
0006A2
Program: CSYN
Program: CSYN
Explanation: Subsystem user ID in SGFR and SIGT do not
Explanation: The following error conditions may have match.
occurred:
v There is a SYNCC macro option that is not valid. System action: ECB is exited unless the ERRTN option is
coded on the SYNCC macro.
v The index register specified on the SYNCC macro is not
valid. User response: Verify that the correct SSU SIGT item and
v There is an index register specified on the synchronizable SGFR were used. If so, then correct whichever one is not
global field. correct.
v The database indicator in the ECB is greater than the
number of SSU’s in the SIGT. 0006A6
v There is a negative value specified in the specified index
Program: CSYN
register.
v The adjusted index value exceeds the number of Explanation: The ECB tried to unlock a global it did not
synchronizable globals. have.
System action: In all cases, the ECB is exited unless the System action: The ECB is exited unless the ERRTN option
ERRTN option was coded in the SYNCC macro. was coded on the SYNCC macro.
User response: Do one of the following (these actions User response: Verify that the synchronizable global being
correspond to the previous explanations): locked is the same as the one being unlocked or synchronized.
v Check the SYNCC macro option.
v Check to see if an index register that is not valid is 0006A7
specified.
Program: CSYN
v Verify that the SYNCC object code is correct.
Explanation: The ECB tried to unlock a global when it did
v Verify the DBI in the ECB. Verify that the correct SIGT is
not have a global locked.
loaded.
v The value of the index register cannot be negative. System action: The ECB is exited unless the ERRTN option
on the SYNCC macro was coded.
v The global index plus the value in the index register is
greater than the number of synchronizable global records. User response: Verify that a SYNCC LOCK is done before a
SYNCC UNLOCK or SYNC is issued.
0006A3
0006A8
Program: CSYN
Program: CSYN
Explanation: There was FIND error while trying to find the
file copy for the synchronizable global. Explanation: There was a FILE error when filing the
synchronizable global record.
System action: The subsystem is cycled to the 1052 state and
the ECB is exited. System action: The subsystem is cycled to 1052 state and the
ECB is exited.
User response: Ensure that the record ID on the record is
correct. User response: Do the following:
1. Determine the cause of the error.
2. Correct the error.
v Tried to issue a SYNCC macro when the SSU was dormant Program: CNPU
v Length of the global field is zero in Section 1 of the SIGT. Error Message: GLOBAL INDEX OUT OF RANGE
v In uni-mode processing, the displacement into the global
Explanation: The Global Index for the SIPCC item is out of
directory was not valid.
range.
The dump produced by this error includes the entire SIGT for System action: A system error is issued and exited.
the associated subsystem, printed as a User Specified Area. In
User response: This error should not occur. It is a symptom
addition, R0 contains a value that further clarifies the cause of
of incompatibility with the SYNLST macro and the SIGT table
the error. The values contained in R0 and their meanings are
used for global synchronization. Ensure that the SYNLST
as follows:
contains the global records-fields, user-defined by the system
111 The SIOCNT field contains zeros. initialization program (SIP) GLSYNC macro, and contained in
the SIGT table.
222 A UATBC call to locate the first SSU of a SS found
the SS dormant.
0006AD
333 The SI1GCA field contains an address that is not
valid. Program: CNPS
444 The SYNCC request refers to a dummy entry. Error Message: INVALID SI1GT ENTRY ENCOUNTERED –
CHECK OFFLINE SIGT
555 The SI1GLI field contains zeros.
Explanation: The entry in the SI1GT table has a displacement
666 A CEBIC call to save or restore an SSU ID returned
value of 0, which is not valid.
an error condition.
System action: A system error is issued and the entry control
System action: The subsystem is cycled to 1052 state and the
block (ECB) exits.
ECB is exited.
User response: Verify that the SIGT table was built properly
User response: IPL the system at a convenient time.
by the offline process.
0006AA
0006AF
Program: CNPU
Program: CNPR/GOGO
Error Message: INVALID SSU ID INPUT TO SIPCC
Error Message: ERROR PROCESSING SIGT IN BSS —
Explanation: The SSU Name Input in the SIPCC item was RESTART TERMINATED
not found in the subsystem users table or it does not match
Error Message: ERROR IN BSS GLOBAL LOAD — RESTART
the SSU two-character ID (SSU ID) also passed in the SIPCC
TERMINATED
input.
Explanation: This error is issued when an error occurred
System action: The SERRC macro is issued with the exit
during BSS global processing that caused the BSS to go
option.
dormant. This may have happened during Global Loading
User response: The problem is likely caused by corruption of (GOGO) or during SIGT building (CNPR).
SIPCC data. If the SSU name and ID passed by SIPCC are
System action: The 0006AF system error is issued and restart
valid and correspond, the SIGT table was incorrectly
processing is exited.
generated by CNPR for this SS. Check the SSU names,
user-defined to the system initialization program (SIP) User response: Check the previous console error messages
(through GLSYNC) for creating the SIGT table. that indicate which type of error occurred in BSS global
processing. This message should never be issued by itself.
0006AB
0006B3
Program: CNPU
Program: CMV0
Error Message: INVALID GLOBAL SYNC REQUEST
Error Message: ERROR ON ENQUEUE OF SESSION
Explanation: The SIPCC time requested update of a Global
PACING QUEUE
field (or record) but this SS has no synchronizable Global
fields (or records) defined. Explanation: This message occurs when the Queue Manager
(CMX0) indicates there was an error during the enqueue of a
System action: A system error is issued and is exited.
message on the session pacing queue.
User response: The SS processing the global synchronization
114 TPF Messages (System Error, Offline, and Program Status Word)
0006B4 • 0006C2
System action: The entry control block (ECB) exits. If there is to save as much of the file address chain as possible. Some
an I/O error, the queue is purged. SENDT traffic may be lost, and the current message is queued.
User response: Review the system error dump to determine User response: The detail and gross error indicators will
why the enqueue failed. determine the reason for the retrieval error.
0006B4 0006B9
Program: CMV0 Program: Displayed on the console and in the dump.
Error Message: ERROR ON GET MESSAGE FROM SESSION Error Message: ERR — SENDT DEQUEUE PROCESS
PACING QUEUE
Explanation: The system is unable to dequeue SENDT
Explanation: This message occurs when the Queue Manager messages due to retrieval errors on the fixed-file SENDT
(CMX0) indicates there was an error during a get of a message queue information record or the large long term pool records
from the session pacing queue. referenced within the fixed-file Q information record or the
SENDT message itself.
System action: The entry control block (ECB) exits and the
queue is purged. System action: A system error is issued with the explanatory
appended message and the SENDT traffic dequeue process
User response: Review the system error dump to determine
continues until all retrievable messages are dequeued. Traffic
why the get failed. queued to any record that could not be retrieved is lost.
Explanation: An error occurred during an attempt to find Program: Displayed on the console and in the dump.
(FINWC) a record on the OMT queue for this SCB. Error Message: SENSE COMMAND YIELDS IMPROPER
System action: The entire queue is purged. PATHID ON CU xxxx
User response: Review the system error dump to determine Explanation: This message is from the CLMF segment.
the cause of the error and to correct it. Ensure that the queue A Sense command chained from a Read Locks command
pointers in the session control block (SCB) are not corrupted. obtained a sense byte containing the path ID over which the
locks were read. The path ID is not equal to the expected path
0006B7 ID as shown in the header of the processor table.
Program: Displayed on the console and in the dump. System action: A SERRC macro is issued with the R option,
which specifies a return to the next sequential instruction
Error Message: ERR — SENDT Q INFO RCD INIT (NSI).
Explanation: The program found an error return from the file User response: Determine why the path IDs differ. Check
address compute program (FACE) or retrieval error while that the path ID in the processor table is set correctly. The ECB
attempting to initialize SENDT queue information records. work area contains the expected and the actual path IDs. The
header of the processor table contains the expected path ID,
System action: A system error is issued with the explanatory
which the program moved to its ECB work area.
message appended. The program continues the initialization
process for all allocate SENDT Q information records.
0006C2
User response: Review the system error dump to determine
the cause of the error and to correct it. FACE must be able to Program: Displayed on the console and in the dump.
return the correct file address. Inspection of detail and gross
error indications will determine the reason for retrieval failure. Error Message: READ LOCK ERROR DURING LOCK
MANAGEMENT ON CU cu
0006B8 Where:
Program: Displayed on the console and in the dump. cu The control unit.
Error Message: UNABLE TO Q SENDT MESSAGE Explanation: I/O errors occurred following FDCTC macro
processing to read the locks.
Explanation: This error occurs when the system is unable to
retrieve fixed-file SENDT Q information records or the large System action: One of the following occurs:
long term pool records referenced within the fixed-file Q v A catastrophic system error is issued and the TPF system is
information record. IPLed.
System action: A system error is issued with the explanatory v A system error is issued and processing continues.
appended message. If the error is on the fixed-file record User response: Do the following:
segment, XHA3 exits and the SENDT message is lost.
If the error occurred on the pool record segment, XHA3 tries
1. Examine the dump and determine the type of error that 1. Enter the ZCTKA DISPLAY command to determine the
occurred. The dump contains diagnostic information in amount of the ECB heap that is allocated.
symbolic location CE1SUx of the ECB work area. 2. Enter the ZCTKA ALTER command with the EMPS
2. Correct the error. parameter specified to increase the maximum size of the
ECB heap, if necessary.
Error Message: UNABLE TO SET LOCKS IN 'TO' CU
3. Enter the ZCTKA ALTER command with the MMHS
Explanation: I/O errors occurred following FDCTC macro parameter specified to change the maximum number of
processing to set locks in the destination control unit (CU). 4-KB frames that an ECB can acquire for the ECB heap.
System action: A catastrophic system error is issued and the
TPF system is IPLed. See TPF Operations for more information about the ZCTKA
DISPLAY and ZCTKA ALTER commands.
User response: Do the following:
1. Examine the dump and determine the type of error that
0006C8
occurred. The dump contains diagnostic information in
symbolic location CE1SUx of the ECB work area. Program: Displayed on the console and in the dump.
2. Correct the error. Error Message: MOVELOCK LOGIC ERROR, UNEXPECTED
Error Message: ERROR UNLOCKING LOCKS IN 'FROM' RESPONSE
CU Explanation: A response was received from another processor
Explanation: I/O errors occurred following FDCTC macro in a loosely coupled complex but the action that caused the
processing to read the locks. response from that processor was not received by this
processor, for example, a movelock request was lost.
System action: A system error is issued and processing
continues. System action: A catastrophic system error is issued, and the
TPF system is re-IPLed because the database configuration
User response: Do the following: may have changed.
1. Examine the dump and determine the type of error that
User response: Determine whether a movelock request
occurred. The dump contains diagnostic information in
should have been received and if yes, determine what
symbolic location CE1SUx of the ECB work area.
occurred to prevent the request from being received by this
2. Correct the error. processor.
0006C3 0006C9
Program: CLMF Program: Displayed on the console and in the dump.
Error Message: UNLOCK ERROR DURING LOCK Error Message: MOVELOCK TIMEOUT, MISSING
MANAGEMENT on CU cu RESPONSE
Where: Explanation: The movelock function moved the locks from
cu The control unit. one control unit to another and was waiting for the other
processors in a complex to do the same and respond. At least
Explanation: I/O errors occurred following FDCTC macro one other processor did not send a response acknowledging
processing to unlock the locks. At least one channel command completion of its lock movement.
word (CCW) in the chain of unlocked CCWs failed.
System action: A catastrophic system error is issued and the
System action: A system error occurs and processing TPF system performs an IPL.
continues.
User response: Determine why the response was not
User response: Examine the dump to determine the type of received. The CBRW for level 0, byte 1 will have the mask for
error. The dump contains diagnostic information in symbolic the missing processors.
location CE1SUx of the ECB work area.
0006CA
0006C6
Program: CPAC
Program: Displayed on the console and in the dump.
Error Message: KEYPOINT 0 READ ERROR
Error Message: ECB HEAP EXHAUSTED DURING LOCK
MANAGEMENT Explanation: Because of a request to mount a module, the
system attempted to initialize the control unit. For some
Explanation: While building the list of locks to re-create in reason the initialization routine was unable to read keypoint 0.
the new control unit during lock management, the process
was unable to allocate enough ECB heap. Lock management System action: The system issues a SERRC macro resulting in
processing cannot proceed for this entry control block (ECB). dump with this message and the ECB is exited.
System action: A catastrophic system error is issued and the User response: Determine why the system was unable to
TPF system is IPLed. read keypoint 0.
116 TPF Messages (System Error, Offline, and Program Status Word)
0006CD • 0006DD
0006CD 0006DA
Program: CBPK Program: CLHV, CCSTOR
Error Message: INVALID BPKD PARAMETER LIST PASSED Error Message: INVALID STORAGE BLOCK ADDRESS
ON CALL
Explanation: A user tried to release a storage block whose
Explanation: The BPKD pointed to on the call does not address does not fall within the valid range of storage block
contain a correct format. addresses or does not fall on a block boundary.
System action: None. If the appended message indicates that this error came from
the $RSWBC or $RCOMC macros, R1 will contain the block
User response: None.
address that is not valid. Otherwise, R1 points to the frame
Error Message: TEXT COUNT ZERO AND NO EOM control table entry for the block address that is not valid. R3
FOUND contains an index to the slot table (see IDSFCT for details) and
can be used to get the ECB virtual address (EVA) of the block.
Explanation: CBPK scanned all the input characters but did Otherwise, R0 contains the block address.
not find the end-of-message complete (EOM) character that
signifies the end of the message data. System action: The storage block is not returned to the list. A
SERRC macro is issued with an exit.
System action: None.
User response: None.
User response: None.
Error Message: LOGIC ERROR, TEXT POINTER NOT 0006DB
POINTING AT KEYWORD
Program: CLHV, CCSTOR
Explanation: CBPK was processing a keyword but when the
character scan was resumed it was not pointing to a keyword Error Message: GNAVC — PRIVATE AREA STORAGE
identifier. EXHAUSTED
System action: The ECB is exited. | Explanation: A user tried to get a storage block when no
| virtual addresses are available in the private area of the ECB
User response: Your system programmer should try to | virtual memory (EVM). If this system error occurs during
determine why the error occurred by using the associated | enter/back processing, the program block might be dumped
dump. Then, correct the error. | twice because certain fields were not finished being updated.
System action: The entry is exited and error recovery is
0006CE initiated.
Program: CPAF User response: Check the failing ECB to determine whether
Error Message: DASD MOUNT/DISMOUNT LOGIC the application program is using blocks in an efficient manner.
ERROR. DEVICE IS NOT A VALID DASD MOUNTED TO
CIO. 0006DC
Explanation: An illogical condition occurred during DASD Program: CLHV, CCSTOR
mount/dismount processing. DASD mount/dismount
processing should not be in the CPAF segment when the Error Message: GNAVC — CANNOT USE REQUIRED EVM
device is not a valid DASD mounted in CIO. ADDRESS
System action: Return to the next sequential instruction in Explanation: The ECB virtual address (EVA) pointer to the
the CPAF segment. next available virtual address, which is located in the ECB,
does not contain a valid ECB virtual memory (EVM) address.
User response: Your system programmer should determine
why the error occurred by using the associated dump. Then, System action: The entry is exited and error recovery is
correct the error. initiated.
User response: Check the failing ECB to determine whether
0006D9 corruption caused the address to no longer be valid. Do not
access or update the next available virtual address pointer in
Program: CLHV, CCSTOR the ECB.
Error Message: DOUBLE RELEASE OF STORAGE BLOCK
Explanation: A user tried to release a storage block that is 0006DD
not in use. Program: CLHL, CCCLHR
System action: The storage block is not returned to the list. A Error Message: POST INTERRUPT ADDRESS IS ZERO
SERRC macro is issued with an exit.
Explanation: A $CRISC, $ADPC, ADDLC, or ADDFC was
User response: None. issued with a post interrupt address of zero.
System action: If the error is determined during the
processing of an ADDLC or ADDFC SVC call, the entry exits
and error recovery is initiated.
In all other cases, a catastrophic error recovery is initiated #CLHCRS is not a valid equate for ADDLC or ADDFC macro
with no associated ECB. calls.
118 TPF Messages (System Error, Offline, and Program Status Word)
0006E6 • 000700
Program: CLM3
000703 Error Message: PURGE ERROR DURING LOCK
Program: CJIE MANAGEMENT ON sda, RETURN CODE rc, SUD sud
Explanation: During unit exception processing, a parameter sda The symbolic device address (SDA) of the control unit
that is not valid was issued in a concurrency filter lock facility (CU) that received the purge lock order.
(CFLF) perform subsystem function (PSF) order. This was rc The multi-path lock facility (MPLF) return code from the
probably caused. by an overlaid parameter list. purge lock order.
System action: A catastrophic system error occurs. sud The detailed data level error indicator.
User response: In the dump, the right-most 3 bytes of R7 Explanation: A purge lock order was sent to a CU, but the
contain the CFLF partition number, the PSF order number, and action did not end with a return code of zero. This system
the CFLF return code. Inspect the return code to determine the error dump provides diagnostic information about the error
cause of the error. For a list of the return codes, see 3990 that occurred.
Transaction Processing Facility Support RPQs for more
information. System action: None.
User response: None.
000704
Program: CJIE 000732
Explanation: During unit exception processing, a concurrency Error Message: RELBC — NO ECB, FRAME NOT IN USE
filter lock facility (CFLF) return code is detected that is
Explanation: The $RELBC macro determined that the frame
120 TPF Messages (System Error, Offline, and Program Status Word)
000733 • 00073B
Program: CLHV, CCSTOR Explanation: The $DISBC macro determined that the block
address to be disconnected is not a valid block address.
Error Message: RELBC — NO ECB, BLOCK NOT IN USE
System action: The entry is exited and error recovery is
Explanation: The $RELBC macro determined that the block initiated.
address being returned is not a block that is in use.
User response: None.
System action: The entry is exited and error recovery is
initiated.
000739
User response: None.
Program: CLHV, CCSTOR
Program: CLHV, CCSTOR Explanation: The $DISBC macro determined that the SVAT
entry that points to the frame associated with the block is
Error Message: RELBC — WITH ECB, BLOCK NOT zero. Therefore, it is not valid.
OWNED BY THIS ECB
System action: The entry is exited and error recovery is
Explanation: The $RELBC macro determined that the block initiated.
address being returned is not owned by the calling ECB.
User response: None.
System action: The entry is exited and error recovery is
initiated.
00073B
User response: Ensure that the blocks are returned only by
the ECB that previously had the block. Program: CLHV, CCSTOR
Explanation: The CLH internal routine REMOVFRM System action: The entry is exited and error recovery is
determined that the frame to be removed from this ECB is not initiated.
seen in the frame chain for that ECB.
User response: None.
System action: The entry is exited and error recovery is
initiated.
000741
User response: None.
Program: CLHV, CCSTOR
Program: CLHV, CCSTOR Error Message: GECBC — EVA ADDRESS ABOVE PRIVATE
AREA
Error Message: CONBC — BLOCK NOT IN USE
Explanation: The $GECBC internal routine determined that a
Explanation: The $CONBC macro determined that the block request for an attached block cannot be satisfied because the
address to be connected to the ECB is not in use. Therefore, it ECB virtual memory (EVM) address of the block to be
cannot be connected to the ECB. attached is above the end of the ECB private area.
System action: The entry is exited and a error recovery is System action: The entry is exited and error recovery is
initiated. initiated.
User response: None. User response: None.
122 TPF Messages (System Error, Offline, and Program Status Word)
000744 • 00074B
000744 000748
Program: CLHV, CCSTOR Program: CLHV, CCSTOR
Error Message: GECBC — EVA DOES NOT EQUAL SVA Error Message: RECBC — ECB NOT IN USE
(VEQR)
Explanation: The $RECBC internal routine determined that
Explanation: The $GECBC internal routine determined that a the ECB to be released is not in use. Therefore, it cannot be
request for an attached block cannot be satisfied because the released.
ECB virtual memory (EVM) address does not match the
System action: The entry is exited and error recovery is
system virtual memory (SVM) address of the block. The
initiated.
virtual-equals-real (VEQR) mode requires that these addresses
match. User response: None.
System action: The entry is exited and error recovery is
initiated. 000749
User response: None. Program: CLHV, CCSTOR
000746
00074A
Program: CLHV, CCSTOR
Program: Displayed on the console and in the dump.
Error Message: RECBC — R9 IS BELOW FIRST ECB
ADDRESS Error Message: PHYBC — INVALID TYPE SPECIFIED
Explanation: The $RECBC internal routine determined that Explanation: The PHYBC macro detected a type that is not
R9, the SVA pointer to the ECB, is below the start of the ECB valid. The PHYBC macro accepts any physical or logical block
area. Therefore, it cannot release the ECB. type as valid.
System action: The entry is exited and error recovery is System action: The entry is exited and error recovery is
initiated. initiated.
User response: None. User response: The PHYBC macro can be called with any
physical or logical block type as defined in CLHEQ.
000747
00074B
Program: CLHV, CCSTOR
Program: Displayed on the console and in the dump.
Error Message: RECBC — R9 NOT ON AN ECB
BOUNDARY Error Message: SIZBC — INVALID TYPE SPECIFIED
Explanation: The $RECBC internal routine determined that Explanation: The SIZBC macro detected a type that is not
R9, the SVA pointer to the ECB, is not the starting address of valid. The SIZBC macro accepts any physical or logical block
an ECB. Therefore, it cannot be released. type as valid.
System action: The entry is exited and error recovery is System action: The entry is exited and error recovery is
initiated. initiated.
User response: None. User response: The SIZBC macro can be called with any
physical or logical block type as defined in CLHEQ.
00074C 000750
Program: Displayed on the console and in the dump. Program: CLHV, CCSTOR
Error Message: TYPBC — INVALID TYPE SPECIFIED Error Message: CONBC — NO SVA TRANSLATION
AVAILABLE
Explanation: The TYPBC macro detected a type that is not
valid. The TYPBC macro accepts only logical block types as Explanation: The $CONBC macro determined that the block
valid. cannot be connected to the ECB because the system virtual
address (SVA) of the block is not valid. The SVA is above the
System action: The entry is exited and error recovery is
range of addresses of the frames but it cannot be translated to
initiated.
a real address. It is likely that a bad address was passed to the
User response: The TYPBC macro can be called with any $CONBC macro.
logical block type as defined in CLHEQ.
System action: The entry is exited and error recovery is
initiated.
00074D User response: None.
Program: Displayed on the console and in the dump.
Explanation: The MAXBC macro detected a type that is not Program: CICR, CCNUCL
valid. The MAXBC macro accepts only physical block types as Error Message: One of the following:
valid. v GSVAC — CALLING PROGRAM MUST EXECUTE ON
System action: The entry is exited and error recovery is MAIN I-STREAM
initiated. v GSVAC — SYSTEM NOT PAUSED BEFORE CALL
User response: The MAXBC macro can be called with any Explanation: One of the following errors occurred:
physical block type as defined in CLHEQ. v The GSVAC macro cannot be processed on an application
program I-stream.
00074E v The system must be paused before the GSVAC macro is
processed to ensure the validity of the main I-stream system
Program: Displayed on the console and in the dump. virtual memory (SVM) address returned.
Error Message: NUMBC — INVALID TYPE SPECIFIED System action: A system error is issued and the entry control
block (ECB) exits.
Explanation: The NUMBC macro detected a type that is not
valid. The NUMBC macro accepts only physical block types as User response: Do the following:
valid.
1. Correct the programming error.
System action: The entry is exited and error recovery is 2. Try the application program again.
initiated.
User response: The NUMBC macro can be called with any 000760
physical block type as defined in CLHEQ.
Program: COS5
Program: Displayed on the console and in the dump. Appended Message: None.
Error Message: FREEC — INVALID BLOCK ADDRESS Explanation: COS5 was entered with a request table pointer
SPECIFIED of 0.
Explanation: The FREEC macro detected a block address that System action: The ECB is exited.
is not valid. The FREEC macro accepts only addresses that are User response: Do the following:
within the heap and that can be translated within this address
space. 1. Review the program that calls COS5.
2. Update the program to pass a valid request table pointer
System action: The entry is exited and error recovery is to COS5.
initiated.
User response: The FREEC macro should only be called with 000761
the block address returned from a macro that allocates storage
from the heap (MALOC, RALOC, or CALOC macros). The Program: COS5
appended message indicates whether the block address is
Error Message: None.
valid because it is not an address in the heap area or whether
it is an address within the heap that could not be translated. Appended Message: None.
Explanation: COS5 was entered with a request table that is
not valid.
124 TPF Messages (System Error, Offline, and Program Status Word)
000762 • 00076A
If the proper number of records were allocated, then this error Explanation: A tape library event timeout occurred and the
probably represents a hardware error. Review the system error device address is no longer in the tape status table or the
dump to determine the cause of the error and to correct it. Library Manager has no pending status for the operation.
System action: If issued from CORB or CORE, the ECB is
allowed to continue processing.
Error Message: None. System action: Additional categories are obtained to bring
the total number of categories to eight. The entry control block
Explanation: A device-specific input/output (I/O) request (ECB) is allowed to continue processing.
initiated through CEFA was returned with the error index
indicating a tape switch had taken place, but the original User response: Have your system programmer review the
device address was no longer in the tape status table. Library Manager logs to determine how the previously
reserved categories were released.
System action: The entry control block (ECB) ends.
User response: Have your system programmer review the 000771
system error dump to determine why the original device
address was no longer in the tape status table. Program: CORA, CORB, CORC
Error Message: INVALID BRANCH VECTOR
126 TPF Messages (System Error, Offline, and Program Status Word)
000772 • 000781
xxxxxx
000784
The structured query language (SQL) code returned to
the application program. Program: CREB
yyyyy Error Message: TPFAR SQLH ERROR, MANAGER LEVEL
The structured query language (SQL) state returned to CONFLICT. SQLCODE xxxxxx, SQLSTATE yyyyy
the application program.
Where:
Explanation: Processing failed because of a distributed
relational data architecture (DRDA) error. A conversational xxxxxx
protocol error was received by the TPF Application Requester The structured query language (SQL) code returned to
(TPFAR) feature. the application program.
xxxxxx
000786
The structured query language (SQL) code returned to
the application program. Program: CREB
yyyyy Error Message: TPFAR SQLH ERROR, DIST. PROTOCOL
The structured query language (SQL) state returned to ERROR– COMMAND CHECK. SQLCODE xxxxxx, SQLSTATE
the application program. yyyyy
Explanation: Processing failed because of a distributed Where:
relational data architecture (DRDA) error. A command check
was received by the TPF Application Requester (TPFAR) xxxxxx
feature. The structured query language (SQL) code returned to
the application program.
System action: A dump is issued and the SQLCODE and
SQLSTATE are returned to the application program. yyyyy
The structured query language (SQL) state returned to
User response: None. the application program.
128 TPF Messages (System Error, Offline, and Program Status Word)
000787 • 00078C
User response: None. Explanation: The TPF Application Requester (TPFAR) feature
issued a continue query command when the remote
application server thought a query was closed.
000787
System action: A dump is issued and the SQLCODE and
Program: CREB SQLSTATE are returned to the application program.
Error Message: TPFAR SQLH ERROR, DIST. PROTOCOL User response: None.
ERROR– INVALID DESCRIPTION. SQLCODE xxxxxx,
SQLSTATE yyyyy
00078B
Where:
Program: CREB
xxxxxx
The structured query language (SQL) code returned to Error Message: TPFAR SQLH ERROR, DIST. PROTOCOL
the application program. ERROR- QUERY PREVIOUSLY OPENED. SQLCODE xxxxxx,
SQLSTATE yyyyy
yyyyy
The structured query language (SQL) state returned to Where:
the application program.
xxxxxx
Explanation: The TPF Application Requester (TPFAR) feature The structured query language (SQL) code returned to
issued a formatted data object content architecture (FDOCA) the application program.
descriptor that is not valid.
yyyyy
System action: A dump is issued and the SQLCODE and The structured query language (SQL) state returned to
SQLSTATE are returned to the application program. the application program.
User response: None. Explanation: The TPF Application Requester (TPFAR) feature
issued an open query command for a query that the remote
application server thought was previously opened.
000788
System action: A dump is issued and the SQLCODE and
Program: CREB SQLSTATE are returned to the application program.
Error Message: TPFAR SQLH ERROR, DIST. PROTOCOL User response: None.
ERROR- DATA DESCRIPTOR MISMATCH. SQLCODE xxxxxx,
SQLSTATE yyyyy
00078C
Where:
Program: CREB
xxxxxx
The structured query language (SQL) code returned to Error Message: TPFAR SQLH ERROR, DIST. PROTOCOL
the application program. ERROR- RDB CURRENTLY ACCESSED. SQLCODE xxxxxx,
SQLSTATE yyyyy
yyyyy
The structured query language (SQL) state returned to Where:
the application program.
xxxxxx
Explanation: The TPF Application Requester (TPFAR) feature The structured query language (SQL) code returned to
issued data that is not valid for the descriptor sent. the application program.
Error Message: TPFAR SQLH ERROR, DIST. PROTOCOL System action: A dump is issued and the SQLCODE and
ERROR– QUERY NOT OPEN. SQLCODE xxxxxx, SQLSTATE SQLSTATE are returned to the application program.
yyyyy User response: None.
Where:
Where:
000790
xxxxxx
Program: CREB
The structured query language (SQL) code returned to
the application program. Error Message: TPFAR SQLH ERROR, DDM COMMAND
NOT SUPPORTED BY REMOTE APPL SERVER. SQLCODE
yyyyy
xxxxxx, SQLSTATE yyyyy
The structured query language (SQL) state returned to
the application program. Where:
Explanation: A command was issued by the remote xxxxxx
application server before an access relational database (RDB) The structured query language (SQL) code returned to
command was issued by the TPF Application Requester the application program.
(TPFAR) feature.
yyyyy
System action: A dump is issued and the SQLCODE and The structured query language (SQL) state returned to
SQLSTATE are returned to the application program. the application program.
User response: None. Explanation: The SQL return code indicates that the
application server does not support a particular distributed
data management (DDM) command issued by the TPF
00078E
Application Requester (TPFAR) feature.
Program: CREB
System action: A dump is issued and the SQLCODE and
Error Message: TPFAR SQLH ERROR, DIST. PROTOCOL SQLSTATE are returned to the application program.
ERROR— SYNTAX ERROR. SQLCODE xxxxxx, SQLSTATE
User response: None.
yyyyy
Where:
000791
xxxxxx
Program: CREB
The structured query language (SQL) code returned to
the application program. Error Message: TPFAR SQLH ERROR, OBJECT NOT
SUPPORTED. SQLCODE xxxxxx, SQLSTATE yyyyy
yyyyy
The structured query language (SQL) state returned to Where:
the application program.
xxxxxx
Explanation: The TPF Application Requester (TPFAR) feature The structured query language (SQL) code returned to
issued a command that did not conform to the distributed the application program.
data management (DDM) architecture.
yyyyy
System action: A dump is issued and the SQLCODE and The structured query language (SQL) state returned to
SQLSTATE are returned to the application program. the application program.
User response: None. Explanation: The SQL return code indicates that the
application server does not support the TPF Application
Requester (TPFAR) object specified as data in an object data
00078F
stream for the command associated with the object.
Program: CREB
System action: A dump is issued and the SQLCODE and
Error Message: TPFAR SQLH ERROR, DIST. PROTOCOL SQLSTATE are returned to the application program.
ERROR– TARGET NOT SUPPORTED. SQLCODE xxxxxx,
User response: None.
SQLSTATE yyyyy
Where:
000792
xxxxxx
Program: CREB
The structured query language (SQL) code returned to
the application program. Error Message: TPFAR SQLH ERROR, PARAMETER NOT
SUPPORTED. SQLCODE xxxxxx, SQLSTATE yyyyy
yyyyy
The structured query language (SQL) state returned to Where:
the application program.
Explanation: The TPF Application Requester (TPFAR) feature
130 TPF Messages (System Error, Offline, and Program Status Word)
000793 • 000797
xxxxxx
000795
The structured query language (SQL) code returned to
the application program. Program: CREB
yyyyy Error Message: TPFAR SQLH ERROR, RQSCRR ERROR -
The structured query language (SQL) state returned to MISSING REQUEST CORRELATION ID. SQLCODE xxxxxx,
the application program. SQLSTATE yyyyy
Explanation: The SQL return code indicates that the Where:
application server does not support the specified parameter by
the TPF Application Requester (TPFAR) feature for the xxxxxx
specified command. The structured query language (SQL) code returned to
the application program.
System action: A dump is issued and the SQLCODE and
SQLSTATE are returned to the application program. yyyyy
The structured query language (SQL) state returned to
User response: None. the application program.
Explanation: The TPF Application Requester (TPFAR) feature
000793 detected an error when correlating the requests sent with the
responses received. There is a missing correlation ID.
Program: CREB
System action: A dump is issued and the SQLCODE and
Error Message: TPFAR SQLH ERROR, PARAMETER VALUE
SQLSTATE are returned to the application program.
NOT SUPPORTED. SQLCODE xxxxxx, SQLSTATE yyyyy
User response: None.
Where:
xxxxxx
000796
The structured query language (SQL) code returned to
the application program. Program: CREB
yyyyy Error Message: TPFAR SQLH ERROR, RQSCRR ERROR -
The structured query language (SQL) state returned to REQ. CORRELATION ID OUT OF ORDER. SQLCODE xxxxxx,
the application program. SQLSTATE yyyyy
Explanation: The application server does not support or Where:
recognize the specified the TPF Application Requester
(TPFAR) parameter value or that the TPFAR feature does not xxxxxx
support or recognize the specified server parameter value. The structured query language (SQL) code returned to
the application program.
System action: A dump is issued and the SQLCODE and
SQLSTATE are returned to the application program. yyyyy
The structured query language (SQL) state returned to
User response: None. the application program.
detected an error when correlating the requests sent with the xxxxxx
responses received. There is a request correlation ID that is not The structured query language (SQL) code returned to
valid. the application program.
Where: 00079B
xxxxxx Program: CREB
The structured query language (SQL) code returned to
the application program. Error Message: TPFAR SQLH ERROR, DIST. PROTOCOL
ERROR– RDB ACCESS FAILED. SQLCODE xxxxxx,
yyyyy SQLSTATE yyyyy
The structured query language (SQL) state returned to
the application program. Where:
xxxxxx 00079C
The structured query language (SQL) code returned to Program: CREB
the application program.
Error Message: TPFAR SQLH ERROR, REPLY MESSAGE
yyyyy NOT SUPPORTED. SQLCODE xxxxxx, SQLSTATE yyyyy
The structured query language (SQL) state returned to
the application program. Where:
132 TPF Messages (System Error, Offline, and Program Status Word)
0007A0 • 0007A5
yyyyy
0007A0–0007FF The structured query language (SQL) state returned to
the application program.
134 TPF Messages (System Error, Offline, and Program Status Word)
0007AF • 0007B3
yyyyy
0007B1
The structured query language (SQL) state returned to
the application program. Program: CREB
Explanation: The TPF Application Requester (TPFAR) Error Message: TPFAR FDOCA ERROR, LATE ARRAY OR
distributed data management (DDM) interpreter found RD1A ROW DESCRIPTOR IS MISSING OR DID NOT FLOW.
and RD2A in the cursor control area (CCA) already holding a SQLCODE xxxxxx, SQLSTATE yyyyy
block.
Where:
System action: A dump is issued and the SQLCODE and
SQLSTATE are returned to the application program. xxxxxx
The structured query language (SQL) code returned to
User response: None. the application program.
yyyyy
0007AF The structured query language (SQL) state returned to
the application program.
Program: CREB
Explanation: The TPF Application Requester (TPFAR) feature
Error Message: TPFAR DDM INTERPRETER ERROR,
tried to find the local identifier (LID) in the formatted data
ERROR RETRIEVING VARIABLE FROM CTKI OR UATBC.
object content architecture (FDOCA) tables. The TPFAR feature
SQLCODE xxxxxx, SQLSTATE yyyyy
determined that the descriptor was not in the late FDOCA
Where: table but it should have been according to its definition in the
earlier FDOCA table. The descriptor did not flow as a late
xxxxxx descriptor.
The structured query language (SQL) code returned to
the application program. System action: A dump is issued and the SQLCODE and
SQLSTATE are returned to the application program.
yyyyy
The structured query language (SQL) state returned to User response: None.
the application program.
Explanation: The TPF Application Requester (TPFAR) 0007B2
distributed data management (DDM) interpreter found an
Program: CREB
error while attempting to retrieve CTKI or UATBC.
Error Message: TPFAR FDOCA ERROR, CAB BLOCK
System action: A dump is issued and the SQLCODE and
OVERFLOW DURING ENCODE. SQLCODE xxxxxx,
SQLSTATE are returned to the application program.
SQLSTATE yyyyy
User response: None.
Where:
xxxxxx
0007B0
The structured query language (SQL) code returned to
Program: CREB the application program.
User response: None. Error Message: TPFAR FDOCA ERROR, FDOCA TRIPLET
SEQ ERROR DETECTED DURING DECODE. SQLCODE
xxxxxx, SQLSTATE yyyyy
Where:
xxxxxx
0007B6
The structured query language (SQL) code returned to
the application program. Program: CRER
yyyyy Error Message: TPFAR FDOCA ERROR, UNSUPPORTED
The structured query language (SQL) state returned to FDOCA TYPE ENCOUNTERED, CANNOT CONVERT.
the application program. SQLCODE xxxxxx, SQLSTATE yyyyy
Explanation: The TPF Application Requester (TPFAR) feature Where:
tried to preprocess the late formatted data object content
architecture (FDOCA) descriptors. The FDOCA descriptors xxxxxx
sent by the application server were out of sequence. The structured query language (SQL) code returned to
the application program.
System action: A dump is issued and the SQLCODE and
SQLSTATE are returned to the application program. yyyyy
The structured query language (SQL) state returned to
User response: None. the application program.
Explanation: The TPF Application Requester (TPFAR) feature
0007B4 determined that the formatted data object content architecture
(FDOCA) type of incoming column data is not supported. This
Program: CREB
data cannot be converted to another type.
Error Message: TPFAR FDOCA ERROR, INV. FDOCA
System action: A dump issued and the SQLCODE and
TRIPLET TYPE DETECTED DURING DECODE. SQLCODE
SQLSTATE are returned to the application program.
xxxxxx, SQLSTATE yyyyy
User response: None.
Where:
xxxxxx
0007B7
The structured query language (SQL) code returned to
the application program. Program: CREB
yyyyy Error Message: TPFAR FDOCA ERROR, UNSUPPORTED
The structured query language (SQL) state returned to FDOCA TYPE ENCOUNTERED, CANNOT DETERMINE
the application program. LENGTH. SQLCODE xxxxxx, SQLSTATE yyyyy
Explanation: The TPF Application Requester (TPFAR) feature Where:
tried to preprocess the late formatted data object content
architecture (FDOCA) descriptors. A FDOCA triplet type that xxxxxx
is not valid was found. The structured query language (SQL) code returned to
the application program.
System action: A dump is issued and the SQLCODE and
SQLSTATE are returned to the application program. yyyyy
The structured query language (SQL) state returned to
User response: None. the application program.
Explanation: The TPF Application Requester (TPFAR) feature
0007B5 determined that the formatted data object content architecture
(FDOCA) type of incoming column data is not supported. This
Program: CREB
data length could not be determined.
Error Message: TPFAR FDOCA ERROR, A FDOCA
System action: A dump is taken, and the SQLCODE and
DESCRIPTOR DEFINED AS EARLY HAS FLOWED LATE.
SQLSTATE are returned to the application.
SQLCODE xxxxxx, SQLSTATE yyyyy
User response: None.
Where:
xxxxxx
0007B8
The structured query language (SQL) code was returned
to the application program. Program: CREB
yyyyy Error Message: TPFAR FDOCA ERROR, UNSUPPORTED
The structured query language (SQL) state returned to SQL TYPE ENCOUNTERED, CAN NOT ENCODE. SQLCODE
the application program. xxxxxx, SQLSTATE yyyyy
Explanation: The TPF Application Requester (TPFAR) feature Where:
tried to preprocess the late formatted data object content
architecture (FDOCA) descriptors. A FDOCA descriptor xxxxxx
arrived but was defined as early. Only descriptors defined as The structured query language (SQL) code returned to
late can flow from the application server. the application program.
136 TPF Messages (System Error, Offline, and Program Status Word)
0007B9 • 0007BD
Explanation: The TPF Application Requester (TPFAR) feature User response: None.
determined that the structured query language (SQL) type was
unsupported and could not be converted to a distributed
relational data architecture (DRDA) type. 0007BB
System action: A dump is issued and the SQLCODE and Program: CREB
SQLSTATE are returned to the application program. Error Message: TPFAR FDOCA ERROR, FDOCA ENCODE
User response: None. INVOKED WITH INVALID OPTIONS. SQLCODE xxxxxx,
SQLSTATE yyyyy
0007B9 Where:
yyyyy
0007C0
The structured query language (SQL) state returned to
the application program. Program: CREB
Explanation: The TPF Application Requester (TPFAR) feature Error Message: TPFAR FDOCA ERROR, NO RDO DATA
tried to process a decode request. A data object content AVAILABLE FOR PROCESS OF SQLDTARD. SQLCODE
architecture (FDOCA) triplet type that is not valid was found. xxxxxx, SQLSTATE yyyyy
The descriptor preprocessing routines should have detected
this error. Where:
138 TPF Messages (System Error, Offline, and Program Status Word)
0007C3 • 0007D2
pppp
0007C3 Primary error return codes issued by the RECEIVE verb.
Where: pppp
Primary error return codes issued by the SEND verb.
xxxxxx
The structured query language (SQL) code returned to ssssssss
the application program. Secondary error return codes issued by the SEND verb.
yyyyy xxxxxx
The structured query language (SQL) state returned to The structured query language (SQL) code returned to
the application program. the application program.
System action: A dump is issued and the SQLCODE and Explanation: This error reports SNA communications errors
SQLSTATE are returned to the application program. that are visible to the TPF Application Requester (TPFAR)
communications manager manager (CMNAPPC).
System action: A dump is issued and the SQLCODE and received more data on a reply data stream (RPYDSS) than
SQLSTATE are returned to the application program. could be handled in a 4K block. This is an unrecoverable error
condition that must be corrected before the TPFAR feature can
User response: None. resume operation.
System action: A dump is issued and the SQLCODE and
0007D3 SQLSTATE are returned to the application program.
Program: CREB User response: None.
Error Message: TPFAR CMNAPPC ERROR, ERROR WHILE
ATTEMPTING TO ISSUE A VERB. VERB vvvvvvv PRC pppp, 0007D5
SRC ssssssss SQLCODE xxxxxx, SQLSTATE yyyyy
Program: CREB
Where:
Error Message: TPFAR MER ERROR, INVALID CALL TO
vvvvvvv MER. SQLCODE xxxxxx, SQLSTATE yyyyy
The TPF Advanced Program-to-Program Communications
(TPF/APPC) LU6.2 verb that was issued immediately Where:
preceding the communication error.
xxxxxx
pppp The structured query language (SQL) code returned to
Primary error return codes issued by the LU6.2 verb. the application program.
ssssssss yyyyy
Secondary error return codes issued by the LU6.2 verb. The structured query language (SQL) state returned to
the application program.
xxxxxx
The structured query language (SQL) code returned to Explanation: The TPF Application Requester (TPFAR) feature
the application program. made a call to manage error reporting (MER) that is not valid.
System action: A dump is issued and the SQLCODE and Program: CRDQ
SQLSTATE are returned to the application program. Error Message: DBSAC TPF DATABASE SUPPORT
User response: None. STRUCTURE FIND ERROR.
Explanation: The TPF database support structure to attach to
0007D4 the current entry control block (ECB) could not be found.
Program: CREB System action: A system error is issued and and a condition
code of DBSAC_DBSFINDERR is returned back to the
Error Message: TPFAR CMNAPPC ERROR, FATAL RAB application program.
SIZE ERROR ENCOUNTERED. VERB vvvvvvv PRC pppp, SRC
ssssssss SQLCODE xxxxxx, SQLSTATE yyyyy User response: Review the system error dump to determine
which type of FIND error occurred (for example, a record ID
Where: that is not valid, a record code check, or a file address) and
the TPF support structure ID that was used.
vvvvvvv
The TPF Advanced Program-to-Program Communications The following situations may have caused the error:
LU6.2 verb that was issued immediately preceding the v Trying to attach the same TPF database support structure
communication error. twice
pppp v Recycling the file used by the TPF database support
Primary error return codes issued by the LU6.2 verb. structure, for example, it was in a short term pool file
ssssssss v Specifying a TPF database support structure ID that is not
Secondary error return codes issued by the LU6.2 verb. valid or is corrupted.
xxxxxx
The structured query language (SQL) code returned to 0007E1
the application program. Program: CRD9
yyyyy Error Message: SDD INITIALIZATION ERROR, FIND
The structured query language (SQL) state returned to ERROR ADDR– fileaddr, ALLOCATED– xxxxxx, COPIED–
the application program. yyyyy.
Explanation: This error reports that the TPF Application Where:
Requester (TPFAR) communications manager (CMNAPPC)
140 TPF Messages (System Error, Offline, and Program Status Word)
0007E2 • 0007E6
fileaddr
0007E3
File address where FIND failed.
Program: CRD9
xxxxx
The number of structured query language (SQL) database Error Message: CTKI RETRIVAL ERROR
directory entries allocated by keypoint 2 (CK2SDDN).
Explanation: While initializing the structured query language
yyyyy (SQL) database directory entries in core with the information
The number of SQL database directory entries copied from CTKI, CYYM returned an error while trying to access
from file. CTKI. TPF Application Requester (TPFAR) SQL processing
cannot be completed until the CTKI retrieval problem is
Explanation: During the TPF Application Requester (TPFAR)
corrected and the system is re-IPLed.
restart, a FIND error occurred while initializing the SQL
database directory entries in core with the information out on System action: No entries are set up in the SQL database
file. directory table.
System action: The end entry is appended to the SQL User response: Determine why the bad return code was
database directory table. The number of entries copied is put received from CYYM.
in the SQL database directory table header, and the number of
entries in use in the SQL database directory table is set to
zero. A SERRC macro is issued with return. 0007E4
User response: Check the file copies and if possible alter Program: None.
online, or alter the SQL database directory table by entering Error Message: TPFAR ASSEMBLER LINKAGE CALLED
the ZSQLD command. WITHOUT TPFAR IN SYSTEM
See TPF Operations for more information about the ZSQLD Explanation: The TPF Application Requester (TPFAR)
command. assembler linkage segment, CRD5, was called but the system
initialization program (SIP) configuration bit indicated that the
0007E2 TPFAR feature was not available in the system.
Error Message: SDD INITIALIZATION ERROR, ENTRIES User response: Determine whether the segment should be
ON FILE EXCEED CORE ALLOCATION, ALLOCATED- calling the TPFAR feature. If so, check the SIP CONFIG macro
xxxxxx, COPIED- yyyyy, ON FILE- zzzzz for the TPFAR setting.
Where: The segment that made the call is the segment appended in
the dump message.
xxxxx
The number of structured query language (SQL) database See the TPF Application Requester User's Guide for more
directory entries allocated by keypoint 2 (CK2SDDN). information about setting up a TPF system for the TPFAR
feature.
yyyyy
The number of SQL database directory entries copied
from file. 0007E5
System action: The end entry is appended to the SQL User response: Do the following:
database directory table. The number of entries copied is put 1. Review the system error dump to determine which blocks
in the SQL database directory table header, and the number of depleted the heap storage.
entries in use in the SQL database directory table is set to
2. Correct the problem.
zero. A SERRC macro is issued with return.
System action: The entry control block (ECB) exits. communications manager (CMNTCPIP) received a data length
that is not valid.
User response: Do the following:
1. Review the system error dump to determine which blocks System action: A system error dump is issued and
depleted the heap storage. SQLCODE and SQLSTATE are returned to the application
program.
2. Correct the problem.
User response: Check the system error dump to determine
the cause of the protocol violation.
0007E7
Program: CREB
000900–0009FF
Error Message: TPFAR CMNTCPIP FAILURE, ERROR
ATTEMPTING TO ISSUE SOCKET FUNCTION. FUNCTION
func, ERRNO eno, SQLCODE scode, SQLSTATE sstate 000999
sstate
If the error continues, notify your support personnel.
The SQL state that was returned to the application
program.
0009D0
Explanation: A TCP/IP communication error occurred that is
visible to the TPF Application Requester (TPFAR) Program: CDLX
communications manager (CMNTCPIP).
Error Message: DYNAMIC LU DEFINITION EXIT – RVT
System action: A system error dump is issued and ERROR
SQLCODE and SQLSTATE are returned to the application
program. Explanation: The dynamic LU user exit is not coded
correctly. The information specified for the resource vector
User response: Examine the system error dump to determine table (RVT) entry is not valid.
why the socket function failed. Check the ERRNO value
returned in the dump. System action: A SNAPC error dump is issued with a return.
The logon request is rejected.
142 TPF Messages (System Error, Offline, and Program Status Word)
0009D2 • 0009E5
Error Message: TIME STAMP MISMATCH IN NODE System action: A catastrophic system error is issued.
CONTROL BLOCK
User response: Review the system error dump to determine
Explanation: The TPF system could not obtain a node control the cause of the error and to correct it.
block (NCB) for a dynamic logical unit (LU). The time stamp
See TPF ACF/SNA Data Communications Reference for more
in the NCB control record (NCBCR) did not match the time
information about RNHPT and RNHET entries.
stamp in the NCB directory record (NCBDR) due to database
corruption.
0009E3
System action: A SNAPC error dump is issued with a return.
An error is returned to the program that requested the NCB. Program: CS13
User response: Determine why the time stamp in NCBDR Error Message: RNHPT CHAINED ITEM COUNT ERROR
does not match the time stamp in NCBCR and correct the
problem. Explanation: The count of the resource name hash entry table
(RNHET) entries that is stored in the resource name hash
prime table (RNHPT) does not match the actual number of
0009E0 RNHET entries on the synonym chain.
Program: CS13 System action: A catastrophic system error is issued.
Error Message: RECYCLE FAILURE – NO RESOURCE User response: Review the system error dump to determine
AVAILABLE FOR ADD the cause of the error and correct it.
Explanation: The INQRC macro call with FUNCTION=ADD See TPF ACF/SNA Data Communications Reference for more
specified failed because there are no resource vector table information about RNHET entries, synonym chains, and the
(RVT) entries available to add the resource. RNHPT.
System action: A system error is issued with a return.
Control is returned to the caller. 0009E4
User response: Do one of the following: Program: CS13
v Enter the ZNDYN RECYCLE command to recycle the RVT
Error Message: IMPROPER RESIDENCY ON TERM LIST
entries that are on the RVT termination list, which will
make RVT entries available for use. Explanation: An attempt was made to place a resource vector
v If there are no RVT entries on the RVT termination list to table (RVT) entry on the RVT termination list. However, the
recycle, increase the size of the RVT. RVT entry cannot be placed on the RVT termination list for
one of the following reasons:
See TPF Operations for more information about the ZNDYN v The RVT entry was defined by using the offline ACF/SNA
RECYCLE command. See TPF General Macros for more table generation (OSTG) program.
information about the INQRC macro. v The logical unit (LU) is in session.
v A session is being started for the LU.
0009E1
System action: A system error is issued and control is
Program: CS13 returned to the caller.
Error Message: RNHET BACKWARD CHAIN INVALID User response: Do the following:
1. Review the system error dump to determine the cause of
Explanation: The backward chain pointer saved in a resource
the error.
name hash entry table (RNHET) entry is not correct. It does
not match the forward chain pointer that is saved in the 2. Correct the error.
previous RNHET entry on the synonym chain.
See TPF ACF/SNA Data Communications Reference for more
System action: A catastrophic system error is issued.
information about the RVT termination list.
User response: Review the system error dump to determine
the cause of the error and to correct it.
0009E5
See TPF ACF/SNA Data Communications Reference for more
Program: CS13
information about RNHET entries.
Error Message: RV1TERM NOT SET BUT RESIDENT ON
TERM LIST
0009E2
Explanation: A resource vector table (RVT) entry is on the
Program: CS13
RVT termination list when its RV1TERM bit is not set on.
Error Message: RNHET CONTAINS INVALID RNHPT
System action: The RVT entry is removed from the RVT
ADDRESS
termination list.
User response: None. See TPF General Macros for more information about the
ROUTC and INQRC macros. See TPF System Macros for more
See TPF ACF/SNA Data Communications Reference for more information about the SIPCC macro.
information about the RVT termination list.
0009EB
0009E6
Program: CVAQ, CIT6
Program: CS13
Error Message: USER EXIT ERROR
Error Message: RESTRICTED USE OF INQRC MACRO
Explanation: The dynamic LU user exit returned an error
Explanation: The INQRC macro was issued with the during the import ROUTC function or functional management
restricted FUNCTION parameter, but the program that issued
message routing (FMMR).
the INQRC macro was not authorized to issue restricted
macros. System action: The entry control block (ECB) exits.
System action: The entry control block (ECB) exits. User response: Do the following:
User response: Do one of the following: 1. Review the system error dump to determine the cause of
the error.
v Enter the ZAPAT command to authorize the program to
issue restricted macros. 2. Correct the error.
v Change the program so that it does not specify the
See TPF General Macros for more information about the
FUNCTION parameter for the INQRC macro call.
ROUTC macro. See the TPF ACF/SNA Data Communications
Reference for more information about FMMR.
See TPF Operations for more information about the ZAPAT
command. See TPF General Macros for more information about
the INQRC macro. 0009F0
Program: CDLA
0009E7
Error Message: INSUFFICIENT RNHET SPACE
Program: CDLB
Explanation: All of the entries in the RVT are in use. There
Error Message: FACS ERROR OCCURRED ON are no spare RVT entries available to add the resource.
KEYPOINTING RV1RU RECORD
System action: A system error is issued with a return. State
Explanation: A file address retrieval program (FACS) error change is disabled in the TPF system.
occurred while attempting to keypoint a #RV1RU record. The
ordinal number of the #RV1RU record is saved in the entry User response: Use the SNAKEY macro to increase the value
control block at location EBX016. assigned to the MAXRVT parameter in keypoint 2 (CTK2).
System action: The entry control block (ECB) exits. See TPF ACF/SNA Network Generation for more information
about the SNAKEY macro.
User response: Do the following:
1. Review the system error dump to determine the cause of 0009F1
the error.
2. Correct the error. Program: CDLA
Error Message: RNHET ON SYNONYM CHAIN AND
0009EA AVAILABLE LIST
Program: CVAQ, CIT6 Explanation: An entry in the resource name hash entry table
(RNHET) was found in both the synonym chain and the
Error Message: INQRC ERROR resource vector table (RVT) available list.
Explanation: An INQRC error occurred during the import System action: A system error is issued and the program
ROUTC function. The INQRC macro was issued with exits. State change is disabled in the TPF system.
FUNCTION=ADD specified, but the processor could not
create a resource definition for one of the following reasons: User response: Do the following:
v The resource name contained characters that were not valid. 1. Review the system error dump to determine the cause of
the error.
v The resource name already exists.
2. Correct the error.
v No RVT entries are available to add the resource.
System action: The entry control block (ECB) exits. See TPF ACF/SNA Data Communications Reference for more
information about the RNHET and the synonym chain.
User response: Do the following:
1. Review the system error dump to determine the cause of
the error.
2. Correct the error.
144 TPF Messages (System Error, Offline, and Program Status Word)
0009F2 • 0009F7
0009F2 0009F5
Program: CDLA Program: CDLA
Error Message: BAD SYNONYM CHAIN DETECTED Error Message: CURRENT PRIME NUMBER EXCEED MAX
Explanation: A synonym chain was not built correctly. Explanation: The current prime number, which is defined in
keypoint 2 (CTK2) by the value assigned to the MAXPRIM
System action: A system error is issued and the program
parameter in the SNAKEY macro, is larger than the number of
exits. State change is disabled in the TPF system. resource name hash prime table (RNHPT) entries defined in
User response: Do the following: the TPF system.
1. Review the system error dump to determine the cause of System action: A system error is issued and the program
the error. exits. State change is disabled in the TPF system.
2. Correct the error.
User response: Do the following:
1. Review the system error dump to determine the cause of
See TPF ACF/SNA Data Communications Reference for more
the error.
information about synonym chains.
2. Also, to help determine the cause of the error, enter the
ZNKEY command to check the value assigned to the
0009F3 MAXPRIM parameter in the SNAKEY macro.
Program: CDLA 3. Correct the error.
Program: CDLA v No space was allocated for the resource name hash prime
table (RNHPT).
Error Message: RVT IN SESSION BUT TERM BIT ON
System action: A system error is issued and the program
Explanation: A resource vector table (RVT) entry was found exits. State change is disabled in the TPF system.
on the RVT termination list when it should not have been for
one of the following reasons: User response: Do the following:
v The logical unit (LU) is in session. 1. Review the system error dump to determine the cause of
the error.
v The LU is starting a session.
2. Also, to help determine the cause of the error, enter the
v The LU was defined by using the offline SNA table ZNKEY command to check the value assigned to the
generation (OSTG) program. MAXPRIM parameter in the SNAKEY macro.
v The RVT entry is for a non-LU resource. 3. Correct the error.
System action: The TPF system removes the RVT entry from
the RVT termination list. See TPF ACF/SNA Network Generation for more information
about the SNAKEY macro. See the TPF ACF/SNA Data
User response: Do the following: Communications Reference for more information about the
1. Review the system error dump to determine the cause of RNHPT. See TPF Operationsfor more information about the
the error. ZNKEY command.
2. Correct the error.
0009F7
See TPF ACF/SNA Data Communications Reference for more
information about the RVT termination list. Program: CDLA
Program: CCCIEF System action: A DEQC is forced and the exit is continued.
Error Message: MISMATCH BETWEEN TYPE CODES User response: Determine why the ECB did not issue a
DEQC before the ECB issued the EXITC.
Explanation: The type codes for one of the following macro
pairs do not match:
v EVNTC/EVNWC 000E08
v EVNTC/POSTC
v EVNTC/EVNQC. Program: CCCIEF
System action: The issuing ECB is exited. Error Message: SHARED RESOURCE HELD TOO LONG
User response: Determine which is the correct type code and Explanation: Another ECB is currently waiting for this
make the required changes to the using segments. resource and the specified time out value has expired.
System action: The ECB holding the resource is exited and
the resource is passed to the waiting ECB.
146 TPF Messages (System Error, Offline, and Program Status Word)
000E09 • 000E14
User response: Determine why the ECB holding the resource System action: The ECB is exited. The associated message
was unable to complete its processing in the specified time identifies the module detecting the error.
period.
User response: Determine why the event was not found or
why the name is duplicated; neither of these conditions
000E09 should ever occur. Time-out may occur when testing under the
IBM Virtual Machine (IBM VM) system because of possible
Program: CCCIEF DASD contention or an unusually heavy processing load.
Error Message: SHARED RESOURCE HELD TOO LONG
Explanation: Another ECB is currently waiting for this 000E12
resource and the specified time out value has expired. Program: CGENLC
System action: The ECB holding the resource is exited and Error Message: ILLEGAL GENLC FUNCTION PARAMETER
the resource is passed to the waiting ECB. SPECIFIED
User response: Determine why the ECB holding the resource Explanation: An incorrect parameter was specified for a
was unable to complete its processing in the specified time tpf_genlc function call.
period.
System action: The issuing entry control block (ECB) exits.
Explanation: The EVINC macro was issued that specified an See TPF C/C++ Language Support User's Guide for more
event that is not defined as a count-type event. The EVINC information about the tpf_genlc function.
macro can be used only to dynamically increment the count
value for a currently defined count-type event.
000E13
System action: The issuing ECB is exited.
Program: CCCIEF
User response: Make sure that the event specified is defined
Error Message: One of the following:
as a count-type event.
v GENLC LIST DATA LENGTH INCORRECT
Error Message: EVNWC ISSUED FOR EVINC EVENT
v EVENT LIST DATA LENGTH INCORRECT
Explanation: An EVNWC macro was already issued for the
Explanation: One of the following occurred:
event at the time of the EVINC macro request. The EVINC
macro cannot be used to increment the count value for an v A GENLC macro was issued to create or add to a list of
event while there are ECBs waiting on that event. data items, but the list size is incorrect.
v An event list was specified for an EVNTC or POSTC macro,
System action: The issuing ECB is exited.
but the list size is incorrect.
User response: Determine why the EVINC macro was issued
after an EVNWC macro was issued for the same event. The list size is less than the minimum (7 bytes) or more than
the maximum (424 bytes), or a single list item (data element
and control fields) is more than the 256-byte maximum size.
000E11
System action: The issuing entry control block (ECB) exits.
Program: CVFE, GOGO
User response: Do the following:
Error Message: GOGO EVNTC ERROR – error
1. Determine why the list size is incorrect. The CIEF program
Where: determines the list size by multiplying the item size by the
error count of items. The size must be in the range of 7 to 424
One of the following: bytes. (A count or size value of zero results in a list data
v NAME NOT FOUND size of zero.)
v DUPLICATE NAME 2. Correct the problem.
v TIMEOUT
See TPF General Macros for more information about the
Explanation: This error can occur for any of the following
GENLC, EVNTC, or POSTC macro.
reasons:
v An event name declared through the EVNTC macro already
exists in the event table 000E14
v An event name posted through the POSTC macro is not Program: CCCIEF
outstanding
Error Message: MISMATCH BETWEEN LIST ITEM SIZES
v An event awaited for through the EVNWC macro does not
exist Explanation: A POSTC macro was issued for a list-type
v The awaited event timed out before completing. event, but the item size specified does not match the size that
was defined in the event.
148 TPF Messages (System Error, Offline, and Program Status Word)
002012 • 004600
control block (ECB) for time slicing when the ECB was already
004000
identified for time slicing.
Program: Displayed on the console and in the dump.
System action: The ECB ends and a SNAPC error dump is
taken. Error Message: ILLEGAL REGISTER USAGE ON DATEC
MACRO
User response: Correct the application error.
Appended Message: ILLEGAL REGISTER USAGE ON
DATEC MACRO
002012
Explanation: An illegal base register was used on a DATEC
Program: CTMS macro invocation. The dump identifies the location of the
Load Address instruction that was generated as a result of the
Error Message: ERROR DURING TIME-SLICE DATEC macro. This instruction is using either a base or index
INITIALIZATION register that is not allowed by the DATEC macro service
Explanation: An error occured during system restart in the routine in CICS.
time-slice initialization segment CTMS. System action: If this is an ECB-controlled program then the
System action: The entry control block (ECB) continues to ECB is exited. If this is not an ECB-controlled program then
control returns to the calling segment; the contents of the area
run.
in which the date was to be placed are undefined.
User response: Do the following:
User response: Update the program by using the DATEC
1. Determine the cause of the error. macro to use registers that are valid.
2. Correct the error.
See TPF General Macros for more information on the DATEC
macro.
002013
User response: Do the following: 2. Verify that the file address compute program (FACE) table
(FCTB) on the active image is correct.
1. Determine the cause of the error.
3. Verify that the records on the source image are not
2. Correct the error. corrupted.
3. Ensure that the time-slice name table record on file 4. Load the source image again with the auxiliary loader
contains the correct time-slice names and attributes. (TLDR) or the general file loader (ALDR), if necessary.
See TPF Operations for more information about the ZIMAG
002014 COPY command. See TPF System Installation Support Reference
Program: CTMT for more information about multiple TPF images.
See TPF System Macros for more information about the LEMIC
macro.
Error Message: CFL2 – NOTIFY LOCK NOT FOUND ON Explanation: A request was issued to a coupling facility (CF)
DELETE in the LEMIC macro service routine
(OPERATION=DELETESET is coded on the LEMIC macro).
Explanation: An item from the notify lock structure was However, an unexpected response code was returned from the
processed and a request was issued to a coupling facility (CF) CF.
to delete the item from the notify lock structure. An error
occurred because the item was not found in the notify lock System action: A system error is issued and control returns
structure. to the caller.
System action: A system error is issued and processing User response: See your IBM service representative.
continues.
See TPF System Macros for more information about the LEMIC
User response: See your IBM service representative. macro.
004603 004606
Error Message: CFL2 – UNEXPECTED RESPONSE CODE Error Message: CFL2 – UNEXPECTED RESPONSE CODE
FOR LEMIC DELETE FOR LEMIC MANAGE
Explanation: A request was issued to a coupling facility (CF) Explanation: A request was issued to a coupling facility (CF)
in the LEMIC macro service routine (OPERATION=DELETE is in the LEMIC macro service routine (OPERATION=MANAGE
coded on the LEMIC macro). An error occurred because an is coded on the LEMIC macro). However, an error occurred
unexpected response code was returned from the CF. because an unexpected response code was returned from the
CF.
System action: A system error is issued and control returns
to the caller. System action: A system error is issued and control returns
to the caller.
User response: See your IBM service representative.
User response: See your IBM service representative.
See TPF System Macros for more information about the LEMIC
macro. See TPF System Macros for more information about the LEMIC
macro.
004604
004607
Program: CFL2
Program: CNPY
Error Message: UNABLE TO LOCATE IOB FOR LOCK
GRANTED NOTIFICATION LOCKNAME – lockname on CF – Error Message: CTKI RETRIEVAL TIMEOUT — CHECK
cfname EXTERNAL LOCKING FACILITIES RESTART WILL RESUME
WHEN CTKI HOLD IS RELEASED
Where:
Explanation: The retrieval of CTKI for one of the processors
lockame in a loosely coupled complex is taking longer than the
The name of the lock. specified timeout value. This indicates that another processor
cfname in the loosely coupled complex is holding CTKI for an
The name of the coupling facility (CF). excessive amount of time.
Explanation: Lock granted notification was received from a System action: This system error is issued to inform the
CF for a lock request that had been queued. However, the operator that the retrieval is taking longer than usual. Restart
input/output block (IOB) that originally requested the lock does not continue until the external lock facility (XLF) lock is
cleared and the processor is able to retrieve CTKI.
150 TPF Messages (System Error, Offline, and Program Status Word)
004608 • 00460C
System action: One of the following occurs: User response: Do the following:
v A catastrophic system error is issued. 1. Review the system error dump to determine the cause of
the error.
v A system error is issued and control returns to the caller.
2. Correct the error.
User response: Do the following:
1. Review the system error dump to determine the cause of
004615
the error.
2. Correct the error. Program: CFL1
152 TPF Messages (System Error, Offline, and Program Status Word)
004616 • 004622
System action: A catastrophic system error is issued. Explanation: An unexpected reply code was received from
the coupling facility (CF).
User response: Do the following:
System action: A catastrophic system error is issued.
1. Review the system error dump to determine the cause of
the error. User response: See your IBM service representative.
2. Correct the error.
004623 004628
Program: CFL2 Program: CFCR, CFL2
Error Message: CFL2 – LOCKING ERROR USERID Error Message: program – ERROR ON COUPLING FACILITY
ALREADY HOLDER/WAITER REQUEST
Explanation: A locking request was sent to a coupling facility Where:
(CF) to hold the lock or wait for it, but the processor is
already holding the lock or waiting for it. program
The name of the program that detected the error.
System action: A catastrophic system error is issued.
Explanation: One of the following errors occurred:
User response: See your IBM service representative. v An unexpected error occurred in response to a coupling
facility (CF) request. If the error is the result of a request
004624 exception, another system error precedes this one. The
preceding system error provides detailed information about
Program: CFL2 the request exception that occurred.
Error Message: INCORRECT CF SLOT ADDRESS – v During processing of a CF locking request, the processor
POSSIBLE CORE CORRUPTION was found to be disconnected from the CF locking
structure.
Explanation: A pointer to an entry in the coupling facility
locking table (CFLT) or the CFLT itself is corrupted. System action: One of the following occurs:
v If the error occurred in response to a CF locking request, a
System action: A catastrophic system error is issued.
catastrophic system error is issued.
User response: Do the following: v If the error occurred in response to a CF caching request,
1. Determine the source of the main storage corruption. the system error is Issued and processing continues.
2. Correct the error. User response: Do one of the following:
v See your IBM service representative.
004626 v Do the following:
Program: CFL2 1. Determine why the processor has been disconnected
from the CF locking structure.
Error Message: CFL2 – ERROR RETURN DURING CLRU
2. Correct the problem.
OPERATION
3. Perform an initial program load (IPL) of the TPF system.
Explanation: A request was issued to a coupling facility (CF)
in the LEMIC macro service routine
(OPERATION=CLEARUSER is coded on the LEMIC macro). 004629
However, an error occurred because an unexpected response Program: CFL2
code or unexpected reply code was returned from the CF.
Error Message: CFL2 – UNEXPECTED RESPONSE CODE
System action: A system error is issued and control returns FOR LEMIC READUSER
to the caller.
Explanation: A request was issued to a coupling facility (CF)
User response: See your IBM service representative. in the LEMIC macro service routine
See TPF System Macros for more information about the LEMIC (OPERATION=READUSER is coded on the LEMIC macro).
macro. However, an error occurred because an unexpected response
code was returned from the CF.
154 TPF Messages (System Error, Offline, and Program Status Word)
00462B • 004631
System action: A catastrophic system error is issued. System action: A catastrophic system error is issued.
User response: See your IBM service representative. User response: See your IBM service representative.
Error Message: CFL2 – ERROR ATTEMPTING TO UNLOCK See TPF System Macros for more information about the LEMIC
AN EXCLUSIVE LOCK macro.
System action: A catastrophic system error is issued. Error Message: CFL2 – UNEXPECTED READ NOTIFY
ENCOUNTERED
User response: See your IBM service representative.
Explanation: The post-interrupt routine that was used to
process information read from the notify lock structure
00462B received control; however, the TPF system was not expecting
the information to be read at this time. The notify lock
Program: CFL2
structure information can be read only when the TPF system
Error Message: CFL2 – NOTIFY LOCK STRUCTURE FULL is informed that information was added to the structure.
Explanation: An attempt to place information in the notify System action: A catastrophic system error is issued.
lock structure was not successful because there is no more
User response: See your IBM service representative.
room in the structure.
System action: A catastrophic system error is issued.
00462F
User response: See your IBM service representative.
Program: CFL2
Error Message: CFL2 – UNEXPECTED RESPONSE CODE
00462C
FOR READNL
Program: CFL2
Explanation: An attempt was made to read information from
Error Message: CFL2 – UNKNOWN IOB OPERATION TYPE the notify lock structure on a coupling facility (CF). An error
ON REL/WD occurred because the read was not successful and an
unexpected response code was returned.
Explanation: A release or withdraw operation was completed
for an input/output block (IOB), and the IOB was ready to be System action: A catastrophic system error is issued.
placed on the ready list in the correct I-stream to complete
User response: See your IBM service representative.
postprocessing in the correct routine. However, the correct
routine could not be determined because the macro ID
(MIOMID) in the IOB did not contain a valid value. 004630
System action: A system error is issued and the IOB is Program: CFL3
released.
Error Message: CFL3 – INCORRECT OPERATION TYPE
User response: Do the following: USED IN LEMIC MACRO
1. Determine the source of the macro ID (MIOMID) Explanation: An error occurred because the operation type
corruption in the IOB. passed from the CFL3MPAL routine was not valid or there is
2. Correct the error. storage corruption.
System action: A system error occurs and control returns to
00462D the entry control block (ECB).
Program: CFL2, CFL3 User response: Do the following:
Error Message: CFLx – INCORRECT LOCK HOLDER LIST 1. Review the system error dump to determine the cause of
the error.
Where:
2. Correct the error.
x Either 2 or 3 for the CFL segment name.
See TPF System Macros for more information about the LEMIC
Explanation: One of the following errors occurred:
macro.
v A request for a lock was queued because the lock was
already held by another processor. However, the processor
holding the lock was not part of the processor 004631
configuration. Program: CLEMIC
v Either a lock granted request or a lock contention request
needed to be issued to another processor. However, the Error Message: POINTER TO CFLP AREA FOR TPF_LEMIC
processor to receive the lock granted or lock contention IS NOT VALID
information was not part of the processor configuration. Explanation: While processing a tpf_lemic function call, the
TPF system determined that the value of the pointer to the
System action: A SNAP dump is issued to display the Error Message: CFL3 – INCORRECT NUMBER OF
response reason code (RRC) and control returns to the entry REQUESTS FOR LEMIC OPERATION
control block (ECB).
Explanation: An error occurred in the CFL3MPAL routine.
User response: Do the following: While some operations only allow one request, others can
bundle several requests in one LEMIC macro request. If the
1. Review the SNAP dump to determine the cause of the
number of requests is greater than the number allowed for an
error.
operation that allows multiple requests, an error occurs and a
2. Correct the error. system error is issued.
3. If the problem continues, see your IBM service
System action: A system error is issued and control returns
representative to help perform diagnostics on the CF.
to the entry control block (ECB).
See TPF System Macros for more information about the LEMIC User response: Do the following:
macro. 1. Review the system error dump to determine the cause of
the error.
2. Correct the error.
See TPF System Macros for more information about the LEMIC
macro.
156 TPF Messages (System Error, Offline, and Program Status Word)
004638 • 004644
004645 004648
Program: CLM7 Program: CNPY
Error Message: MOVE LOCK MANAGER EVENT ERROR – Error Message: ERROR FILING #CF2LR RECORD
error
Explanation: The filing of a coupling facility (CF) record was
Where: not successful because the record identifier (ID) is not valid or
there is a hardware error.
error
Either DUPLICATE NAME, NAME NOT FOUND, or System action: The restart entry control block (ECB) exits.
TIMEOUT CONDITION.
User response: None.
Explanation: A complex-wide synchronized event erorr (as
referenced in the system error) was found during move locks
manager processing. 004649
System action: A catastrophic system error is issued and all Program: CFLA, CNPY
processing is ended. All processors active in the TPF complex Error Message: ERROR FINDING #CF2LR RECORD
may find the same type of error and processing across the
entire TPF complex will end with catastrohic system errors. Explanation: The finding of a coupling facility (CF) locking
record was not successful because a record identifier (ID) is
User response: Do the following: not valid or there is a hardware error.
1. Review the consoles from all processors in the TPF
System action: The restart entry control block (ECB) exits.
complex to determine why the event error occurred.
2. Correct the problem. User response: Do the following:
3. Perform an initial program load (IPL) of the TPF system 1. Review the preceding messages to determine the cause of
using the IPL destruct/bypass option to establish a the error.
consistent complex-wide locking configuration again. 2. Correct the error.
004646 00464A
Program: CFLA Program: Displayed on the console and in the dump.
Error Message: DISTRIBUTION LIST CONTROL VALUE Error Message: CF LOCKING CONFIGURATION
MISMATCH VERIFICATION FAILED
Explanation: The control value comparison between the Explanation: One of the following occurred:
distribution list file record and the coupling facility locking
v Verification of the coupling facility (CF) locking
table (CFLT) was not successful. This indicates database
configuration was not successful because the processor in
corruption between the CFLT and the distribution list file
the processor configuration has no connectivity to any CFs
record tested.
in the loosely coupled complex.
System action: The restart entry control block (ECB) exits. v A processing step in movelocks was attempting to
synchronize the complex so that all processors would
User response: Do the following:
continue in lock step with one another. The attempt to
1. Determine the source of the database corruption. synchronize did not complete successfully.
2. Correct the error.
System action: A catastrophic system error is issued.
User response: Verify the processor configuration and its
004647
connectivity.
Program: CFLA
Error Message: DISTRIBUTION LIST CHECKSUM FAILURE 00464B
158 TPF Messages (System Error, Offline, and Program Status Word)
00464C • 005001
Error Message: UNABLE TO FIND COUPLING FACILITY System action: A catastrophic system error is issued.
LOCKING RECORD DURING CONFIGURATION CHANGE
User response: Do the following:
Explanation: During a configuration change, the coupling 1. Review the system error dump to determine the cause of
facility locking table (CFLT), the appropriate distribution list the error.
records, and the IPL inhibitor record must be found after the
2. Correct the error.
locks are moved. A TPF system error occurred while finding
one of these records or while resolving the file address of a
distribution list record. See TPF Operations for more information about the ZCFLK
MIGRATE command.
System action: A catastrophic system error is issued.
User response: Do the following: 004650
1. Review the preceding messages to determine the cause of
Program: CFLA, CFLB
the error.
2. Correct the error. Error Message: COUPLING FACILITY LOCKING RESTART
FAILED
program or the CF control blocks and tables. v The value must be less than or equal to a maximum
value that can be determined by examining the CFCR
See TPF Database Reference for more information about CF
copy member in the CCCFCC CSECT.
control blocks and tables.
2. Correct the error.
005002
005005
Program: CFCE
Program: CFCR
Error Message: CF LIST NOTIFICATION VECTOR ERROR
Error Message: MESSAGE SUBCHANNEL
Explanation: The control program (CP) tried to modify a list CONFIGURATION ERROR
notification vector, but a logic error or storage corruption
occurred. System action: A SNAP dump is issued, the message
subchannel is not activated and processing continues.
System action: A catastrophic system error is issued.
Explanation: The service routine for the CFRQC ACTSDA
User response: Review the system error dump for possible
macro determined that not all channel paths for the message
storage corruption, particularly in the CCCFCC control
program or the CF control blocks and tables. subchannel are connected to the same device.
See TPF Database Reference for more information about CF User response: Do the following:
control blocks and tables. 1. Review the SNAP system error to determine the message
subchannel in error.
System action: A SNAP dump is issued and the entry control 1. Determine why the CF command was issued before the
block (ECB) exits. storage deallocation process was completed.
2. Correct the error.
User response: Do the following:
1. Review the SNAP dump to determine the cause of the Program: CFCE
error error. Verify that the value meets the following Error Message: CF SUPPORT LOGIC ERROR
conditions:
Appended Message: INCORRECT FACILITY STATE
v The value must be nonzero.
v The value must be a multiple of 4. Explanation: A coupling facility (CF) command was issued
that requires the CF to be in a managed state, but the CF was
160 TPF Messages (System Error, Offline, and Program Status Word)
005007 • 005100
not in that managed state. It is possible that an unsupported System action: A SNAP dump is issued, control returns to
host connected to the CF and placed it in the nonmanaged the caller, and processing continues.
state.
User response: Do the following:
System action: A catastrophic system error is issued. 1. Determine the source of the list notification token
User response: Do the following: corruption.
1. Determine why the command was issued when the CF 2. Correct the error.
was in a nonmanaged state.
2. Correct the error. 005008
Program: CFCE Program: CFCR
Error Message: CF SUPPORT LOGIC ERROR Error Message: SETLOCK DETECTED CORRUPT CF LOCK
DATA
Appended Message: UNRECOGNIZED ERROR
Explanation: An error occurred because the coupling facility
Explanation: An error condition was detected by the
(CF) lock data could not be determined or was not logical.
coupling facility (CF), but the meaning of the error was not
determined. System action: A SNAP dump is issued and control returns
to the caller.
System action: A catastrophic system error is issued.
User response: Determine the cause of the corruption and
User response: See your IBM service representative.
correct the error.
Program: CFCE
Explanation: A program check condition was found by the Error Message: SETLOCK INPUT REQUEST NOT VALID
coupling facility (CF), probably because of corrupted or failing
Explanation: The CFRQC macro with the REQUEST
storage in or around the message command block (MCB) or
parameter set to SETLOCK was issued and was unable to
message response block (MRB).
modify the coupling facility (CF) lock because the content of
System action: A catastrophic system error is issued. the request indicator in the SETLOCK block is not valid or is
corrupted.
User response: Review the system error dump for possible
storage corruption, particularly in the CCCFCC control System action: A SNAP dump is issued and control returns
program (CP), the CF control blocks and tables, the MCB, and to the caller.
the MRB.
User response: Do the following:
See TPF Database Reference for more information about the 1. Correct the content of the request indicator in the
control blocks and tables. SETLOCK block so it is valid and not corrupted.
Program: CFCE 2. Issue the CFRQC macro again with the REQUEST
parameter set to SETLOCK.
Error Message: CF SUPPORT LOGIC ERROR
Appended Message: REQUEST EXCEPTION
00500A
Explanation: A coupling facility (CF) command was issued,
Program: CFSBFL, CLM6
but the request operand was specified improperly or an
unassigned command code was specified. Error Message: CFSB FILE RECORD CORRUPTION
System action: A system error is issued. Explanation: An error occurred because the file copy of the
coupling facility structure block (CFSB) record is corrupted.
User response: Review the system error dump for possible
storage corruption, particularly in the CCCFCC control System action: A SNAP dump is issued and control returns
program, the CF control blocks and tables, the message to the caller.
command block (MCB), and the message response block
(MRB). User response: Determine the cause of the corruption using
the image of the record that was dumped.
See TPF Database Reference for more information about the
control blocks and tables.
005100
Error Message: CF LIST NOTIFICATION VECTOR RELEASE Appended Message: KEYPOINT POINTER RECORD IS NOT
ERROR VALID
Explanation: A request to release a list notification vector Explanation: During system restart it was determined that
was not successful because it is not assigned. the keypoint pointer record was corrupted or did not match
the #KEYPT definition in the FACE table (FCTB). The ZKPTR v If module CYYF was called to access CTKI, the caller
command with the CANCEL parameter specified was entered directed CYYF to do one of the following:
to cancel the IPL. The rebuilt or updated pointer record – Return to the calling program
created by the system restart was not filed.
– Exit the ECB
System action: The system restart entry control block (ECB) – Perform a TPF system IPL after the dump is processed.
exits.
v If module CYYH was called to access CTKI, the ECB exits.
User response: Do one of the following
User response: Do the following
v Determine why the keypoint pointer record was corrupted
1. Analyze the dump to determine the cause of the problem.
or did not match the #KEYPT definition, correct the
problem, and re-IPL the TPF system. 2. Correct the problem and IPL the TPF system.
v Re-IPL the TPF system and, when requested enter the
ZKPTR command with the REPLACE parameter specified 005103
to file the rebuilt or updated keypoint pointer record that is
created by system restart. Program: CYYF
005104
005102
Program: CVZ6
Program: CYYF, CYYH
Error Message: CTKX VS FACE KEYPT FILE ADDRESS
Error Message: CTKI FIND ERROR MISMATCH
Explanation: Module CYYM reported an error while doing a Appended Message: KEYPOINT c FILE ADDRESS
find for keypoint record I. MISMATCH CTKX-fileadr1 FACS-fileadr2
System action: One of the following occurs: Where:
v If module CYYF was called to access CTKI, the caller c The keypoint that was changed.
directed CYYF to do one of the following:
– Return to the calling program fileadr1
The keypoint file address stored in CTKX.
– Exit the entry control block (ECB)
– Perform a TPF system IPL after the dump is processed. fileadr2
The keypoint file address returned from FACS.
v If module CYYH was called to access CTKI, the ECB exits.
Explanation: During system restart, it was determined that
User response: Do the following the keypoint pointer record (KPTR) was corrupted or did not
1. Analyze the dump to determine the cause of the problem. match the #KEYPT definition in the FACE table (FCTB). The
2. Correct the problem and IPL the TPF system. ZKPTR command with the REPLACE parameter specified was
entered to update the KPTR and, the rebuilt or updated KPTR
Error Message: CTKI FILE ERROR created by system restart was filed. While validating that the
keypoint file addresses in CTKX had not change, it was
Explanation: Module CYYA reported an error while writing
determined that the file address for at least one keypoint had
keypoint record I to the file.
changed.
System action: One of the following occurs:
System action: This is a catastrophic system error. The TPF
162 TPF Messages (System Error, Offline, and Program Status Word)
005105 • 005108
fileaddr
005105
The file address that ESFAC was unable to process.
Program: CVZ5
Explanation: While a command was building a keypoint
Error Message: KEYPT PNTR REC FACE OR FIND ERROR pointer record (KPTR) extent table, the specified function
returned an error condition.
Appended Message: KEYPOINT POINTER RECORD function
ERROR - rectype.0 - error System action: The entry control block (ECB) exits.
error
See the TPF C/C++ Language Support User's Guide for more
The error condition existing in the KPTR, which is either
information about errors returned by the FACE_FACS function
CORRUPTED or OUT OF SYNC.
and TPF General Macros for more information about the values
returned in the detail data level error indicator byte. Explanation: While a command or system process was
finding a KPTR, the cvz5_find_kptr function returned the
specified error condition.
005106
System action: A SNAP dump is taken and processing
Program: CVZ8
continues on the command's error path for a FACE error on a
Error Message: KEYPT PNTR REC BUILD FACE OR ESFAC keypoint record.
ERROR
User response: Do the following:
Appended Message: KEYPOINT POINTER RECORD 1. Analyze the dump to determine the cause of the problem.
EXTENT TABLE BUILD function ERROR - rectype.ord - error Enter the ZKPTR command with the DISPLAY parameter
Where: specified to gather additional data to assist in the analysis.
2. Correct the problem and reissue the failing command.
function
The system function returning a FACS or ESFAC error
See TPF Operations for more information about the ZKPTR
condition.
command.
rectype
The record type whose keypoint pointer record (KPTR)
005108
extent table was being built.
Program: CVZ8
ord The record ordinal being processed when the error
occurred. Error Message: KEYPT CNTRL REC EXTENT TABLE BUILD
ERROR
error
For FACS errors: R7-hexdata R6-hexdata. Appended Message: rectype KPTR EXTENT TABLE BUILD
ERROR - error
Explanation: While a command or system process was Program: Varied: displayed in the dump and the dump
building a keypoint pointer record (KPTR) extent table, the message
cvz8_build_extent_table function returned one of the Error Message: MALOC, CALOC, MALLOC, CALLOC
following error conditions: ERROR
v RECORD TYPE NOT DEFINED: The record type whose
Explanation: A MALOC or CALOC macro or malloc or
extent table is being built is not defined in the FACE table
calloc function was called to allocate storage. No storage was
(FCTB).
returned.
v TOO MANY EXTENTS: The FCTB has more than 32
RAMFIL statements defining the record type. System action: A system error dump is taken and processing
of the command ends.
v RECORD TYPE NOT VALID: The record type is not
#KEYPT or #KFBXn where n is 0–254. User response: Do the following:
System action: A SNAP dump is taken and processing 1. Analyze the dump to determine the cause of the problem.
continues on the command's error path for a FACE error on a 2. Correct the problem and reissue the failing command.
keypoint record.
User response: Do the following: 00510B
1. Analyze the dump to determine the cause of the problem.
Program: CYYJ
2. Correct the problem and reissue the failing command.
Error Message: CTKC FIND ERROR
See TPF System Generation for more information about the Explanation: Module CYYM reported an error while doing a
RAMFIL statements and the FCTB. FIND for keypoint record C.
164 TPF Messages (System Error, Offline, and Program Status Word)
006000 • 006008
Error Message: $LCKRC/$ULKRC – BCADBI CORRUPTED System action: A catastrophic system error is issued.
Explanation: The macro service routine for the $LCKRC and User response: Do the following:
$ULKRC macros in the CVF3 segment found that the 1. Have your system programmer review the system error
subsystem displacement value (BCADBI) is not valid. dump for BCA usage.
System action: A catastrophic system error is issued. 2. Do one of the following:
User response: Review the system error dump to determine v Increase the storage allocation for VFA synchronization.
if storage corruption occurred. v Reduce the number of VFA synchronization candidates
in the TPF system.
006001
Program: CCVFAC (CVF3) 006006
System action: Processing continues. v Reduce the number of VFA synchronization candidates
in the TPF system.
User response: Do the following:
1. Have your system programmer review the system error
dump. 00600C
2. Determine the cause of the problem. Program: CCVFAC
3. Correct the problem. Error Message: CVF3SLRD – UNABLE TO ALLOCATE BCA
Explanation: While trying to find a virtual file access (VFA)
006009 synchronization candidate record, the TPF system was unable
Program: CCRCSC (CJIV) to locate an available buffer control area (BCA) to use for
record allocation.
Error Message: IOB CONTENTION COUNT INCORRECT
System action: The entry control block (ECB) exits and
Explanation: An error occurred because the contention count processing continues.
contains a negative value.
User response: Do the following:
System action: Processing continues.
1. Have your system programmer review the system error
User response: Do the following: dump for BCA usage.
1. Have your system programmer review the system error 2. Do one of the following:
dump. v Increase the storage allocation for VFA synchronization.
2. Determine the cause of the problem. v Reduce the number of VFA synchronization candidates
3. Correct the problem. in the TPF system.
00600A 00600D
Error Message: BCA CORRUPTION DETECTED DURING Error Message: BCA DEQUEUE – BCA NOT FOUND
SYNC FIND
Explanation: During post-interrupt processing, an error
Explanation: One of the following errors occurred at occurred because the address for the buffer control area (BCA)
post-interrupt time: was not found during dequeue processing of the CCVFAC
CSECT.
v The address for the buffer control area (BCA) does not
match the address stored in the input/output block (IOB). System action: A catastrophic system error is issued.
v The buffer is no longer empty. However, the BCA was User response: See your IBM service representative to
marked lock pending and empty. determine the cause of the error.
System action: A catastrophic system error is issued.
User response: Do the following: 00600E
1. Have your system programmer review the system error Program: CCVFAC (CVF3)
dump, paying particular attention to the BCA and the IOB.
Error Message: CVF3PIS3 – UNABLE TO ALLOCATE BCA
2. Determine the cause of the problem.
3. Correct the problem. Explanation: During RECID=0 post-interrupt processing, the
TPF system was unable to locate an available buffer control
area (BCA) to use for record allocation.
00600B
System action: A catastrophic system error is issued.
Program: CCVFAC
User response: Do the following:
Error Message: CVF3SLWT – UNABLE TO ALLOCATE BCA
1. Have your system programmer review the system error
Explanation: While trying to write a virtual file access (VFA) dump for BCA usage.
synchronization candidate record, the TPF system was unable 2. Do one of the following:
to locate an available buffer control area (BCA) to use for
v Increase the storage allocation for VFA synchronization.
record allocation.
v Reduce the number of VFA synchronization candidates
System action: The entry control block (ECB) exits and in the TPF system.
processing continues.
User response: Do the following: 00600F
1. Have your system programmer review the system error
Program: CCVFAC (CVF3)
dump for BCA usage.
2. Do one of the following: Error Message: CVF3PIS1 – UNABLE TO ALLOCATE BCA
v Increase the storage allocation for VFA synchronization. Explanation: During virtual file access (VFA) synchronization
post-interrupt processing, the TPF system was unable to locate
166 TPF Messages (System Error, Offline, and Program Status Word)
006010 • 006543
an available buffer control area (BCA) to use for record coupled complex did not complete the RIAT update in the
allocation. designated time period.
System action: A catastrophic system error is issued. System action: The entry control block (ECB) exits and
processing continues.
User response: Do the following:
1. Have your system programmer review the system error User response: Do the following:
dump for BCA usage. 1. Have your system programmer review the system error
2. Do one of the following: dump to determine which processors in the loosely
coupled complex did not respond.
v Increase the storage allocation for VFA synchronization.
2. Review keypoint I to ensure active processor indicators
v Reduce the number of VFA synchronization candidates match your current system configuration.
in the TPF system.
3. Enter the ZRTDM RESET command with the CTLVAL
parameter specified.
006010 4. Enter the ZRTDM MODIFY command again.
Program: DRD7
See TPF Operations for more information about the ZRTDM
Error Message: FIND ERROR ON IBMM4 RECORD MODIFY and ZRTDM RESET commands.
Explanation: An error occurred while retrieving the record
ID attribute table (RIAT) control record. 006543
System action: The entry control block (ECB) exits and Program: CYYF, CYYH
processing continues.
Error Message: #CN1ST FACE ERROR
User response: Do the following:
1. Initialize the RIAT control record. Explanation: An error was returned from FACS while
attempting to read or write one of the subsystem state table
2. Enter theZRTDM MODIFY or ZRTDM RESET command, ordinals of record type #CN1ST.
as appropriate.
System action: One of the following occurs:
See TPF Operations for more information about the ZRTDM v IF CYYF was called to access the subsystem state table
MODIFY and ZRTDM RESET commands. ordinal, the caller directed CYYF to do one of the following:
– Return to the calling program
006012 – Exit the entry control block (ECB)
Program: DRD2 – Perform an IPL after the dump is processed.
v If module CYYH was called, the ECB exits.
Error Message: ZRTDM MODIFY – CTL VALUE MISMATCH
User response: Do the following
Explanation: While processing a ZRTDM MODIFY request,
an error occurred because the control value field in the file 1. Examine the dump to determine the cause of the problem.
copy of the record ID attribute table (RIAT) control record 2. Correct the problem and IPL the TPF system.
does not match the expected value.
Error Message: #CN1ST FIND ERROR
System action: The entry control block (ECB) exits and
processing continues. Explanation: An error occurred while attempting to find one
of the subsystem state table ordinals of record type #CN1ST.
User response: Do the following:
System action: One of the following occurs:
1. Enter the ZRTDM RESET command with the CTLVAL
parameter specified. v IF CYYF was called to access the subsystem state table
ordinal, the caller directed CYYF to do one of the following:
2. Enter the ZRTDM MODIFY command again.
– Return to the calling program
See TPF Operations for more information about the ZRTDM – Exit the ECB
RESET and ZRTDM MODIFY commands. – Perform an IPL after the dump is processed.
v If module CYYH was called, the ECB exits.
006013 User response: Do the following
Program: DRD2 1. Examine the dump to determine the cause of the problem.
Error Message: ZRTDM MODIFY – PROCESSOR TIMEOUT 2. Correct the problem and IPL the TPF system.
Explanation: The ZRTDM MODIFY command was entered Error Message: #CN1ST FILE ERROR
from a processor in a loosely coupled complex and a system Explanation: An error occurred while attempting to file one
interprocessor communication (SIPC) message was sent to all of the subsystem state table ordinals of record type #CN1ST.
active processors in that loosely coupled complex to update
the in-core image of the record ID attribute table (RIAT). An System action: One of the following occurs:
error occurred when one or more processors in the loosely v IF CYYF was called to access the subsystem state table
ordinal, the caller directed CYYF to do one of the following:
– Return to the calling program 2. Increase the available heap storage for the application, if
– Exit the ECB necessary.
User response: Do the following Program: Displayed on the console and in the dump.
1. Examine the dump to determine the cause of the problem. Error Message: ENTXC TO DLM MAIN FUNCTION
2. Correct the problem and IPL the TPF system. Explanation: An entry control block (ECB) that has already
created its C run-time environment or has nested program
levels entered a dynamic load module (DLM) that contains a
007000–007FFF main function.
System action: The ECB exits.
007101
User response: Change the application logic so the DLM that
Program: Displayed on the console and in the dump. contains the main function is not entered after the program has
Error Message: STANDARD STREAM streamlist OPEN created its C run-time environment or after the ECB has
FAILURE entered another program segment. Calling the system function
is the only supported way to run a DLM that contains a main
Where: function.
streamlist
One or more of the standard streams, which are STDIN, 007501
STDOUT, and STDERR.
Program: CTKS
Explanation: One or more of the standard streams could not
be opened during ISO-C run-time environment initialization. Error Message: UNABLE TO INITIALIZE THE PUBLIC
This system error is preceded by one 007102 system error for ENVIRONMENT LIST
each of the standard streams that could not be opened. Any
Explanation: CTKS could not obtain enough system heap
redirection specification in a command string will cause this
storage to initialize the public environment list.
system error.
System action: The public environment list is not initialized.
System action: The TPF entry is forced to exit.
User response: Do one of the following:
User response: Remove the redirection specifications from
the string.h function command string. v Increase the number of frames allocated for the system heap
by entering the ZCTKA command.
v Reduce the number of entries on the public environment
007102 list.
Program: Displayed on the console and in the dump.
Error Message: STANDARD STREAM REDIRECTION 007502
FAILURE
Program: CCE4
Explanation: A redirected standard stream could not be
Explanation: The parent entry control block (ECB) requested
opened during ISO-C run-time environment initialization. This
for more than 4095 bytes of data to be passed to the child
system error is followed by a 007101 system error that forces
ECB.
the TPF entry to exit. Any redirection specification in a
command string will cause this system error. System action: The ECB exits.
System action: Control returns to the TPF entry. User response: Update the application program to pass no
more than 4095 bytes of data to the child ECB.
User response: Remove the redirection specifications from
the string.h function command string.
007503
007106 Program: CCE4
Program: Displayed on the console and in the dump. Explanation: The maximum number of child entry control
blocks (ECBs) that can be created by one parent ECB has been
Error Message: STORAGE ALLOCATION FAILURE IN
exceeded.
ISO-C ENVIRONMENT INITIALIZATION
System action: The parent ECB exits.
Explanation: There is not enough free heap storage available
to complete initialization of the ISO-C run-time environment. User response: Update the application program to request
less than 50 child ECBs.
System action: The entry control block (ECB) exits.
User response: Do the following:
1. Check the application for memory leaks or heap storage
that can be freed.
168 TPF Messages (System Error, Offline, and Program Status Word)
007507 • 007514
007507 007512
Program: CCE4 Program: COMX
Explanation: The timeout value specified by the parent entry Error Message: ERROR FINDING ORDINAL recordord OF
control block (ECB) exceeds the allowed maximum of 32 768 RECORD TYPE recordtype
seconds.
Where:
System action: The ECB exits.
recordord
User response: Update the application program to specify a The ordinal number of the #FLOCK or #INODE fixed file
timeout value from 0 to 32 768 seconds. record.
recordtype
007508 FLOCK or INODE.
Error Message: ERROR GENERATING THE FILE ADDRESS System action: The entry control block (ECB) exits.
OF ORDINAL recordord OF RECORD TYPE recordtype
User response: See your IBM service representative to
Where: determine the cause of the error.
recordord
The ordinal number of the #FLOCK or #INODE fixed file 007514
record.
Program: COMX
recordtype
Error Message: ERROR PURGING THE FILE FOR ORDINAL
FLOCK or INODE.
recordord OF RECORD TYPE INODE
Explanation: A request was made to find a #FLOCK or
Where:
#INODE fixed file record, but the file address of the #FLOCK
or #INODE fixed file record could not be generated. This error recordord
could be caused by having a bad file address compute The ordinal number of the #INODE fixed file record.
program (FACE) table on the TPF system.
Explanation: A request was made to allocate a pair of
System action: The entry control block (ECB) exits. #FLOCK and #INODE fixed file records, but the held
resources of the previous file could not be purged.
User response: See your IBM service representative to
determine the cause of the error. System action: The pair of #FLOCK and #INODE fixed file
records is allocated for the new file.
See TPF System Generation for more information about the
FACE table. User response: See your IBM service representative to
determine the cause of the error.
recordord
007515
The ordinal number of the #FLOCK or #INODE fixed file
Program: COMX record.
Error Message: THE devicenum MAJOR DEVICE NUMBER IS Explanation: There is an internal logic error in the file
INCORRECT system.
Where: System action: The ECB exits and the file operation is rolled
back.
devicenum
The major device number. User response: Call your IBM representative to determine the
cause of the problem.
Explanation: The specified device driver is not in the
user-defined or TPF-defined device driver tables. Either the
device driver specification is incorrect or not all the device 007541
drivers have been installed.
Program: CFIN
System action: The entry control block (ECB) exits.
Error Message: FEWER INODES ON SYSTEM THAN
User response: Do the following: PREVIOUS ALLOCATED
1. Scan all mknod C function calls and verify that the calls Explanation: This error occurs during file system restart
specified the intended device drivers. when there are fewer #INODE fixed file records defined in the
2. Check that all device drivers are installed. FACE table (FCTB) than were previously allocated for the file
system.
See the TPF C/C++ Language Support User's Guide for more System action: The entry control block (ECB) exits and file
information about the mknod C function. system restart is not completed successfully.
170 TPF Messages (System Error, Offline, and Program Status Word)
007545 • 007622
007545 007600
Program: Displayed on the console and in the dump. Program: CMQ2
Error Message: NO ENTRY AVAILABLE FOR USE IN Error Message: MQI CHANNEL DIRECTORY I/O ERROR
CACHE
Explanation: An I/O error occurred while trying to access
Explanation: A cache entry is required for use but there are the Message Queue Interface (MQI) channel directory.
none available.
System action: The ZMQID ALTER, ZMQID DEFINE,
System action: A system error dump is issued and control ZMQID DELETE, or ZMQID DISPLAY command is rejected
returns to the caller as if the data was placed in the cache and the ECB is exited.
successfully.
User response: Do the following:
User response: None. 1. Determine whether the MQI channel directory needs to be
redefined by entering the ZMQID DISPLAY command to
007546 display individual entries in the MQI channel directory.
2. If the MQI channel directory needs to be redefined, enter
Program: Displayed on the console and in the dump. the ZMQID DEFINE and ZMQID ALTER commands to
Error Message: UNABLE TO UNLOCK A CACHE HASH define the lost entries.
ENTRY LOCK
See TPF Operations for more information about the ZMQID
Explanation: The file system was unable to unlock a cache ALTER, ZMQID DEFINE, ZMQID DELETE, and ZMQID
hash entry lock. DISPLAY commands.
System action: A system error dump is issued and the entry
control block (ECB) exits. 007601
User response: None. Program: Displayed on the console and in the dump.
Error Message: MQI CLIENT STORAGE ERROR
007548
Explanation: The Message Queue Interface (MQI) client is
Program: Displayed on the console and in the dump. unable to obtain enough ISO-C heap storage to process the
Error Message: A CACHE ENTRY HAS A VALIDITY BIT MQI function requested.
THAT IS CORRUPTED System action: Processing ends and the ECB is exited.
Explanation: The validity indicators for the cache entry do User response: Do the following:
not contain a supported value. This indicates either a logic
error in the cache code or core corruption. 1. Determine whether the application processing the MQI
function is allocating and deallocating ISO-C heap storage
System action: A system error dump is issued and the cache correctly.
entry is marked as no longer valid. 2. Do one of the following:
User response: None. v If heap storage is being managed correctly, check
increasing the maximum number of frames allowed for
heap storage for each entry control block (ECB)
00754A (keypoint A, the CK1MMH field in the CK1KE segment).
Program: CFCA v If heap storage is not being managed correctly, correct
the problem in the application.
Error Message: CF CACHE CONTROL ENTRY
CORRUPTION
007622
Explanation: An error occurred because an incorrect connect
token was used when the CFCA segment issued a cache Program: CEL2
request to a coupling facility (CF) cache structure. The connect
token uniquely identifies the connection to a CF cache structure Error Message: PROGRAM NAME MISMATCH OR
in your processor configuration. If the verification is not RECORD ID IS NOT 00FF
successful, it is probable that the connect token is not valid Explanation: While activating an E-type loader loadset, the
because of storage corruption. E-type loader attempted to lock a program in the loadset into
System action: A catastrophic system error is issued. main storage for one of the following reasons:
v The program is allocated with the PRELOAD parameter.
User response: See your IBM service representative to
determine the cause of the error and to correct it. v The program is an ISO-C library.
v An earlier version of the program was locked into main
storage.
172 TPF Messages (System Error, Offline, and Program Status Word)
007704 • 007750
1. Determine the cause of the Internet server application User response: Examine the dump to determine the cause of
errors. the tpf_fork function failure and correct the problem.
2. Correct the errors. See the TPF C/C++ Language Support User's Guide for more
3. Enter the ZINET STOP command to stop the Internet information about the tpf_fork function.
server application
4. Enter the ZINET START command to start the Internet 007706
server application again.
Program: Displayed on the console and in the dump.
See TPF Operations for more information about the ZINET Error Message: INETD LISTENER PWD ERROR SERVER -
STOP and ZINET START commands. sname USER - username
Where:
007704
sname
Program: Displayed on the console and in the dump. The name of the Internet server application.
Error Message: INETD LISTENER SOCKET ERROR SERVER username
- sname IP - ipaddr PORT - portnum PID - pid The user name of the Internet server application.
Where: Explanation: The Internet daemon found an error when
sname setting up the real user ID (UID) or group ID (GID), or the
The name of the Internet server application. effective user or group ID, or the working directory for the
specified user name.
ipaddr
The Internet Protocol (IP) address. System action: The Internet daemon exits the Internet
daemon listener process.
portnum
The port that the Internet server application uses for IP User response: Examine the dump to determine the cause of
traffic. the error and correct the problem.
pid The process identifier (ID) of the Internet daemon listener See the TPF C/C++ Language Support User's Guide for a list of
entry control block (ECB). the TPF-defined user names.
Explanation: An error occurred because an incorrect value User response: Do one of the following:
was specified for the IFORKISN field when coding the v If the signal was raised for a valid reason, modify the
tpf_fork function. This value was not in the range of available application to include a signal handler using the signal
I-streams. function.
System action: The entry control block (ECB) exits. v If the signal was raised incorrectly, examine the dump to
determine which program sent the signal. If the signal was
User response: Code the tpf_fork function call again sent from another process, the process block attached to the
specifying a correct value for the I-stream. exiting ECB may have the process identifier (ID) of the ECB
See the TPF C/C++ Language Support User's Guide for more that sent the signal. If the process block does not contain
information about the tpf_fork function. this information, the exiting ECB may have raised the signal
itself.
007753 See the TPF C/C++ Language Support User's Guide for more
information about the signal function.
Program: Displayed on the console and in the dump.
Error Message: INCORRECT VALUE FOR THE IFORKEBL 007778
FIELD.
Program: Displayed on the console and in the dump.
Explanation: An error occurred because the IFORKEBL field
contained incorrect information when the tpf_fork function Error Message: UNABLE TO SEND SIGNAL TO PROCESS
called the $FORKC macro. procid
See the TPF C/C++ Language Support User's Guide for more Explanation: The entry control block (ECB) attempted to
information about the tpf_fork function. See TPF System send a signal to the target process, but the target process
Macros for more information about the $FORKC macro. cannot receive additional signals because the target process
has received too many signals that it has not handled.
174 TPF Messages (System Error, Offline, and Program Status Word)
007779 • 007785
User response: Do the following: Program: Displayed on the console and in the dump.
1. Review the system error dump to determine the cause of Error Message: IP MESSAGE TABLE IS FULL
the error.
Explanation: A request to get an Internet Protocol message
2. Correct the error.
table (IPMT) entry failed because the table is full.
See TPF Transmission Control Protocol/Internet Protocol for more System action: The request is rejected.
information about the IP configuration record.
User response: Do the following:
1. Increase the value of the IPMTSIZE parameter in the
007802 SNAKEY macro to increase the size of the IP message
table.
Program: Displayed on the console and in the dump.
2. Reassemble keypoint record 2 (CTK2) against the SNAKEY
Error Message: FIND ERROR ON IP CONFIGURATION macro.
RECORD
3. Reload CTK2.
Explanation: During system restart, an input/output (I/O) 4. Perform an initial program load (IPL) of the TPF system
error occurred while trying to read the Internet Protocol (IP) again.
configuration record from file.
System action: The TPF system is placed in state change See TPF ACF/SNA Network Generation for more information
disabled mode. about the SNAKEY macro. See TPF Transmission Control
Protocol/Internet Protocol for more information about the IP
User response: Do the following: message table.
1. Review the system error dump to determine the cause of
the error.
007806
2. Correct the error.
Program: Displayed on the console and in the dump.
See TPF Transmission Control Protocol/Internet Protocol for more Error Message: DUPLICATE EVENT NAME
information about the IP configuration record.
Explanation: While processing a socket application
programming interface (API) function, the EVNTC macro was
issued for TCP/IP native stack support; however, the event
name was a duplicate.
176 TPF Messages (System Error, Offline, and Program Status Word)
007807 • 007830
Error Message: EVENT NOT FOUND See TPF Transmission Control Protocol/Internet Protocol for more
information about the individual IP trace definition record.
Explanation: While processing a socket application
programming interface (API) function, the EVNWC macro was
issued for TCP/IP native stack support; however, the event 007820
name was not found.
Program: Displayed on the console and in the dump.
System action: The TPF system cleans up the socket and
returns to the application with an error return for the socket Error Message: NO SYSTEM HEAP FOR SSL CONTROL
API function that was being processed. TABLE
User response: Do the following: Explanation: An error occurred because the TPF system was
unable to obtain system heap storage for the SSL control table
1. Review the system error dump to determine the cause of during TPF system restart.
the error.
2. Correct the error. System action: The restart entry control block (ECB) has been
exited.
See TPF General Macros for more information about the User response: Do the following:
EVNWC macro. See TPF Transmission Control Protocol/Internet 1. Enter the ZCTKA ALTER command with the MMHS
Protocol for more information about TCP/IP native stack parameter specified to increase the amount of heap storage
support. in the TPF system.
2. IPL the TPF system.
007813
Program: Displayed on the console and in the dump. See TPF Operations for more information about the ZCTKA
ALTER command.
Error Message: FACS ERROR ON INDIVIDUAL IP TRACE
DEFINITION RECORD
007830
Explanation: During TPF system restart, an error was
returned from the FACS program while trying to calculate the Program: CTSX
file address of the individual Internet Protocol (IP) trace Error Message: INSUFFICIENT IP ROUTING TABLE
definition record. ENTRIES
System action: The TPF system is placed in state change Explanation: During Internet Protocol (IP) restart processing,
disabled mode. the number of active IP routing table entries that were filed
User response: Do the following: out on the IP routing table fixed file records (#IPRTE) would
not fit into the in-core IP routing table.
1. Examine the system error dump to determine the cause of
the error. System action: Message CTSX0009E is displayed on the
2. Correct the error. console indicating the number of in-core IP routing table
entries required. The entry control block (ECB) exits. The
RESTART ABORTED STATE CHANGE DISABLED message
See TPF Transmission Control Protocol/Internet Protocol for more
may be printed and the restart schedule ends abnormally.
information about the individual IP trace definition record.
User response: Examine the dump to verify that the contents
of the initial #IPRTE records are valid and do one of the
following:
v If the number of active entries is valid, do the following:
1. Enter the ZNKEY command with the ALTER and
MAXRTE parameters specified to change the maximum
number of IP routing table entries to the number of #IPRTE records ends. The current contents of the in-core IP
entries that need to be allocated. This number is found routing table are now the final contents of the routing table
in message CTSX0009E. and the entries are filed out to the #IPRTE records. IP restart
2. Perform an initial program load (IPL) of the TPF system. continues.
v If the number of active entries is not valid, do the following: User response: Do the following:
1. Examine the dump to determine the source of the 1. Examine the dump to determine the cause of the FINWC
incorrect count. macro error.
2. Correct the error. 2. Correct the error.
See TPF Operations for more information about the ZNKEY See TPF General Macros for more information about the
command. See TPF System Generation and TPF ACF/SNA FINWC macro. See TPF System Generation and TPF ACF/SNA
Network Generation for more information about the #IPRTE Network Generation for more information about the #IPRTE
fixed file record type. fixed file record type.
007831 007833
Program: CTSX Program: CTSX
Error Message: FACS ERROR ON IP ROUTING TABLE Error Message: FILE ERROR ON IP ROUTING TABLE
RECORD RECORD
Explanation: During Internet Protocol (IP) restart processing, Explanation: During Internet Protocol (IP) restart processing,
a file address compute program (FACS) error occured while an error occurred during FILEC or FILNC macro processing
attempting to file out the contents of the in-core IP routing while attempting to file out the contents of the in-core routing
table to the #IPRTE records. table to #IPRTE records.
System action: The filing out of the in-core table is not done. System action: The filing out of the in-core table is rolled
IP restart continues and the in-core IP routing table does not back and none of the #IPRTE records are filed out. The current
change. contents of the in-core IP routing table are now the final
contents of the routing table. IP restart continues.
User response: Do the following:
1. Examine the dump to determine the cause of the file error. User response: Do the following:
2. Correct the error. 1. Examine the dump to determine the cause of the FILEC or
FILNC macro error.
Program: CTSZ 2. Correct the error.
Error Message: FACS ERROR ON IP ROUTING TABLE
RECORD See TPF General Macros for more information about the FILEC
and FILNC macros. See TPF System Generation and TPF
Explanation: During ZTRTE command processing, a file ACF/SNA Network Generation for more information about the
address compute program (FACS) error occured while
#IPRTE fixed file record type.
attempting to file out the contents of the in-core IP routing
table to the #IPRTE records.
007850
System action: The filing out of the in-core table is not done.
IP restart continues and the in-core IP routing table does not Program: Displayed on the console and in the dump.
change.
Error Message: FACS ERROR ON OSA DEFINITION
User response: Do the following: RECORD IN ORDINAL NUMBER ordnum
1. Examine the dump to determine the cause of the file error. Where:
2. Correct the error.
ordnum
The ordinal number of the failing record.
See TPF System Generation and TPF ACF/SNA Network
Generation for more information about the #IPRTE fixed file Explanation: During TPF system restart, an error was
record type. returned from the file address conversion (FACS) program
while attempting to calculate the file address of the Open
Systems Adapter (OSA) definition record.
007832
System action: The TPF system is placed in State Change
Program: CTSX
Disabled mode.
Error Message: FIND ERROR ON IP ROUTING TABLE
User response: Define enough #IBMMP4 fixed file records.
RECORD
See TPF Transmission Control Protocol/Internet Protocol for more
Explanation: During Internet Protocol (IP) restart processing,
information about OSA-Express support. See TPF System
an FINWC macro error occurred while attempting to read the
Generation for more information about #IBMMP4 fixed file
contents of the #IPRTE records into the in-core IP routing
records.
table.
System action: The retrieval of IP routing entries from
178 TPF Messages (System Error, Offline, and Program Status Word)
007851 • 007856
Explanation: During TPF system restart, an I/O error User response: Do the following:
occurred while attempting to read an Open Systems Adapter 1. Examine the system error dump to determine the cause of
(OSA) Internet Protocol (IP) address record from file. the error.
System action: The TPF system is placed in State Change 2. Correct the error.
disabled mode.
180 TPF Messages (System Error, Offline, and Program Status Word)
0078E1 • 007910
See TPF Transmission Control Protocol/Internet Protocol for more System action: This RSA operation request is processed by
information about OSIT and TPF System Generation for more Secure Sockets Layer (SSL) software rather than the
information about #OSIT file records. cryptographic accelerator.
See TPF Transmission Control Protocol/Internet Protocol for more System action: The TPF system is placed in state change
information about OSIT and TPF System Generation for more disabled mode.
information about #OSIT file records. See TPF General Macros
User response: Do the following:
for more information about the FINWC macro.
1. Examine the system error dump to determine the cause of
the error.
0078F0
2. Correct the error.
Program: Displayed on the console and in the dump.
See TPF Transmission Control Protocol/Internet Protocol for more
Error Message: DUPLICATE EVENT NAME
information about the CPACF.
Explanation: The EVNTC macro was issued while the TPF
system was processing an RSA operation request with a
007910
cryptographic adjunct processor, but the event name was a
duplicate. Program: Displayed on the console and in the dump.
System action: This RSA operation request is processed by Error Message: UNABLE TO GET 8-BYTE POOL TYPE
Secure Sockets Layer (SSL) software rather than the WITH ECB DATA LEVEL SPECIFIED
cryptographic accelerator.
Explanation: A GETFC macro was issued with a record ID
User response: Do the following: that uses 8-byte file addresses; however, an entry control block
1. Examine the system error dump to determine the cause of (ECB) data level was specified instead of a data event control
the error. block (DECB).
2. Correct the error. System action: The ECB exits.
User response: Change the program that issues the GETFC
See TPF Transmission Control Protocol/Internet Protocol for more
macro to specify a DECB instead of an ECB data level.
information about RSA operations and cryptographic adjunct
processors. See TPF General Macros for more information about See TPF General Macros for more information about the GETFC
the EVNTC macro. macro.
008508
See TPF Operations for information about the ZCTKA ALTER
Program: CTH4 command when changing storage values.
User response: Do the following: Explanation: The entry control block (ECB) has already
allocated more ISO-C stack storage than is allowed for a
1. Review the system error dump to determine the maximum
thread ECB.
heap storage allowed and where the existing heap storage
has been allocated. System action: The thread environment is not created and
2. Correct the problem. the ECB exits.
User response: Do the following:
See TPF Operations for information about the ZCTKA ALTER
1. Review the system error dump to determine the maximum
command when changing storage values.
stack storage allowed and where the existing stack storage
Program: CTHTCB has been allocated.
2. Correct the problem.
Error Message: MALLOC FAILURE FOR STACK
Explanation: Not enough storage to process the thread See TPF Operations for information about the ZCTKA ALTER
control block (TCB) stack. command when changing storage values and the ZCTKA
DISPLAY command to display the TSTK value.
System action: The ECB exits.
User response: Do the following:
00850B
1. Review the system error dump to determine the maximum
heap storage allowed and where the existing heap storage Program: CCEB, CCE4
has been allocated.
Error Message: ECB THREAD ATTEMPTED TO CALL
2. Correct the problem. ENTDC/SWISC
See TPF Operations for information about the ZCTKA ALTER Explanation: A thread entry control block (ECB) issued an
command when changing storage values. ENTDC macro or a SWISC macro with TYPE=ENTER
specified.
Program: CTHINT
System action: The thread ECB exits.
Error Message: MALLOC FAILURE FOR THGL
User response: Do the following:
Explanation: There is not enough storage to process the 1. Review the system error dump to determine the source of
thread global data block (THGL). the ENTDC or SWISC macro.
System action: The ECB exits. 2. Correct the problem.
182 TPF Messages (System Error, Offline, and Program Status Word)
00850C • 008532
See TPF General Macros for more information about the parameter (the maximum number of threads for each process).
ENTDC macro and TPF System Macros for more information This indicates that TPF thread support is not allowed.
about the SWISC macro.
System action: The entry control block (ECB) exits.
User response: If TPF thread support is required, do the
00850C
following:
Program: CTHSIG 1. Enter the ZCTKA ALTER command with the MTHD
parameter specified for the number of threads allowed for
Error Message: PROCESS ABORTED DUE TO THREAD
each process.
ERROR
2. Perform an initial program load (IPL) of the TPF system.
Explanation: An internal error in the CTHD pthread
application programming interface (API) library has forced the
See TPF Operations for more information about the ZCTKA
running process to be cancelled.
ALTER command.
System action: The thread entry control block (ECB) exits.
008533 009101
Program: CRPCCN Program: CLW3
Error Message: RPC SERVER NOT STARTED BY INETD Error Message: ADAPTER BLOCK NOT FOUND ON
ACTIVE QUEUE
Explanation: Remote procedure call (RPC) run-time
processing detected that an entry control block (ECB) issuing Explanation: The adapter control block was not found on the
an RPC application programming interface (API) was not adapter control block active queue when the claw_openadapter
started by TPF Internet daemon (INETD) support. or claw_closeadapter function was in progress.
System action: The ECB exits. System action: A catastrophic system error occurs.
User response: Enter the ZINET ADD command to enable User response: None.
TPF INETD support to start the desired RPC server.
See TPF Transmission Control Protocol/Internet Protocol for more
See TPF Operations for more information about the ZINET information about the claw_openadapter and
ADD command. claw_closeadapter functions.
008541 009102
Program: CVI1 Program: Displayed on the console and in the dump.
Error Message: UATBC ERROR Error Message: UNABLE TO RELEASE CLAW CONTROL
BLOCK
Explanation: An error occurred while issuing the UATBC
macro. The error indicates that corruption occurred in either Explanation: The block type is inconsistent with the block
the subsystem user table or the passed control parameter list. address.
Inaccurate information in the control parameter list indicates
that the original entry control block (ECB) (this is the ECB that System action: A dump is issued and the error code is
issued the WTOPC to access the CVI1 segment) had a returned to the caller in R0.
corrupted subsystem user ID field. User response: Do the following:
System action: A system error dump is issued showing the 1. Review the system error dump and error code in R0. If R0
content of the ICVIPL subsystem user table and CE1SSU, as contains:
well as the current content of the general registers.
1 The block is free already.
User response: Do the following:
2 The block address is not valid.
1. Review the system error dump to determine the cause of
the error. 3 The block is not ordinarily on the queue.
2. Correct the error. 2. Correct the error.
009000–009FFF 009103
System action: A system error dump is issued and an error System action: Restart continues and TCP/IP offload support
indicator is returned to the caller. is disabled.
184 TPF Messages (System Error, Offline, and Program Status Word)
009104 • 009110
2. Correct the error. Error Message: LOG INFORMATION SENT FROM DEVICE
INTERFACE
User response: Do the following: Program: Displayed on the console and in the dump.
1. Review the system error dump to determine which Error Message: UNEXPECTED MESSAGE RECEIVED
program provided the array of descriptors that is not valid.
Explanation: An unexpected socket accept, read, or recvfrom
2. Correct the error.
response was received.
See TPF Transmission Control Protocol/Internet Protocol for more System action: None.
information about the claw_send function.
User response: See your system programmer to determine
the cause of the error and correct it.
009107
See TPF Transmission Control Protocol/Internet Protocol for more
Program: Displayed on the console and in the dump. information about the accept, read, and recvfrom functions.
System action: The nonsocket message is discarded. Program: Displayed on the console and in the dump.
User response: Update the CLA4 user exit to process the Error Message: UNABLE TO ALLOCATE APPLICATION
nonsocket message. BUFFER
See TPF System Installation Support Reference for more Explanation: The socket API function failed to get the
information about the CLA4 user exit. application entry control block (ECB) storage by using the
MALOC or $GSYSC macros.
Program: Displayed on the console and in the dump. User response: Ensure that the #IBMM4 record representing
the TCP/IP configuration table record is defined.
Error Message: INVALID IUCV MESSAGE TYPE RECEIVED
Explanation: A type of inter-user communication vehicle 009118
(IUCV) message that is not valid was received by CLWP.
Program: Displayed on the console and in the dump.
System action: The TPF system returns to the CPU loop.
Error Message: ERROR FILING TCP/IP CONFIGURATION
User response: Do the following: TABLE
186 TPF Messages (System Error, Offline, and Program Status Word)
009119 • 009307
Explanation: An error occurred when the TPF system tried to User response: Do one of the following:
file the Transmission Control Protocol/Internet Protocol v Enter the ZCTKA ALTER command with the EMPS
(TCP/IP) configuration table during TPF system restart. parameter specified to increase the amount of entry control
System action: The TPF system is placed in state change block (ECB) virtual storage.
disabled mode. v Reduce the amount of storage used by the application.
User response: Have your system programmer determine the v Review the system error dump to determine the cause of
cause of the problem and correct the error. the error and correct the error.
System action: The TPF system is placed in state change Error Message: RSYSC FAILED - ADDR heapaddr FOR frames
disabled mode. FRAMES, TOKEN token
recover outstanding MQSeries transaction branches. However, 1. Determine why there is not enough system ECB malloc
the TPF system did not have enough system heap to complete storage to perform the requests and correct the problem.
the requests. 2. Enter the ZCTKA ALTER command to change the
System action: One of the following occurs: maximum amount of malloc storage per ECB, if necessary.
v The restart entry control block (ECB) ends and state change
See TPF Operations for more information about the ZPSMS and
is disabled.
ZCTKA ALTER commands.
v Processor deactivation is not completed.
User response: Do the following: 009310
1. Determine why there are not enough system heap frames
to perform the requests and correct the problem. Program: CMQX
2. Enter the ZCTKA ALTER command to change the amount Error Message: UNKNOWN MQSERIES LOG RECORD
of memory allocated for system heap frames, if necessary.
Explanation: During TPF system restart, or in response to the
ZPSMS command with the PROCESSOR and DEACTIVATE
See TPF Operations for more information about the ZPSMS and parameters specified, the MQSeries resource manager (RM)
ZCTKA ALTER commands. was passed a recovery log record from the log manager (LM).
However, the log record was of an unknown type.
009308 System action: The log record is ignored and recovery
Program: CMQS processing continues.
Error Message: NOT ENOUGH SWBS FOR MQSERIES User response: Do the following:
RECOVERY 1. Determine why an unknown log record is being written to
the recovery log.
Explanation: During TPF system restart, or in response to the
ZPSMS command with the PROCESSOR and DEACTIVATE 2. Correct the program that is writing the unknown log
parameters specified, the MQSeries resource manager (RM) record to the recovery log.
attempted to build recovery tables that are necessary to
recover outstanding MQSeries transaction branches. However, See TPF Operations for more information about the ZPSMS
the TPF system did not have enough system work blocks command.
(SWBs) to complete the requests.
System action: One of the following occurs: 009311
v The restart entry control block (ECB) ends and state change Program: CMQM
is disabled.
Error Message: INCOMPLETE MQSERIES LOG RECORD
v Processor deactivation is not completed.
CHAIN
User response: Do the following:
Explanation: During TPF system restart or in response to the
1. Determine why there are not enough SWBs to perform the ZPSMS command with the PROCESSOR and DEACTIVATE
requests and correct the problem. parameters specified, the MQSeries resource manager (RM)
2. Enter the ZCTKA ALTER command to change the number attempted to recover a committed MQSeries transaction.
of SWBs allocated in the TPF system, if necessary. However, the transaction event spanned multiple recovery log
records and not all of the recovery log records were found on
See TPF Operations for more information about the ZPSMS and the system recovery log.
ZCTKA ALTER commands. System action: The transaction event is ignored and recovery
processing continues.
009309 User response: Determine why the log manager (LM) is not
Program: CMQS passing a complete log record chain to the MQSeries RM and
correct the problem.
Error Message: NOT ENOUGH MALLOC FOR MQSERIES
RECOVERY See TPF Operations for more information about the ZPSMS
command.
Explanation: During TPF system restart, or in response to the
ZPSMS command with the PROCESSOR and DEACTIVATE
parameters specified, the MQSeries resource manager (RM) 009312
attempted to build recovery tables to recover outstanding Program: CMQK
MQSeries transaction branches. However, the TPF system did
not have enough entry control block (ECB) malloc storage to Error Message: ERROR READING IN MQSERIES FILE
complete the requests. ADDRESS xxxxxxxx
User response: Do the following: Explanation: During TPF system restart, the MQSeries queue
188 TPF Messages (System Error, Offline, and Program Status Word)
009313 • 009317
Where: v Load a new version of the FACE table (FCTB) and perform
an initial program load (IPL) of the TPF system again.
function_name
The function name. See TPF Operations for more information about the ZPSMS
Explanation: An MQSeries function such as MQPUT or command.
MQGET performed a function call to copy or add a commit
control record (CCR) into the MQSeries resource manager 009317
(RM), but the transaction was not in the correct state.
Program: Displayed on the console and in the dump.
System action: The entry control block (ECB) exits.
Error Message: NO MQSERIES RECORDS AVAILABLE TO
User response: Ensure the ECB is in an active transaction COMPLETE MQSERIES CHECKPOINT
and the transaction is not suspended when calling the build
CCR service functions. Explanation: An attempt was made to retrieve an unused
#IMQCK fixed file record to save vital information in the
MQSeries checkpoint. However, all records of this type, which A sender channel was not able to find a message on a
are processor unique, are currently in use. transmission queue that was assigned to a batch.
System action: The integrity of the MQSeries data is Error Message: CORRUPT BATCH LIST, XMITQ - queue name
compromised if processing continues. This is a catastrophic
Where:
system dump.
queue name
User response: Allocate more #IMQCK fixed file records in
The name of the transmission queue (XMITQ).
the TPF 4.1 system.
Explanation: This is a program logic error in TPF MQSeries.
See TPF Database Reference and TPF System Generation for more
A sender channel was not able to find a message on a
information about the #IMQCK fixed file record ordinals. See
transmission queue that was assigned to a batch, and the
TPF Application Programming for more information about the
sender channel had a problem with the batch.
TPF MQSeries checkpoint process.
System action: A system error dump is issued and the
program continues.
009318
User response: See your IBM representative to determine the
Program: CMQS
cause of the error.
Error Message: SWB IN SWEPTPID CORRUPTED PID – pid
Where: 009321
pid The persistent identifier (PID) of the binary large object Program: CMQS
(BLOB) that contains the corrupt system work block
Error Message: TO2 DATA CORRUPTION PID – pid
(SWB).
Where:
Explanation: A corrupted SWB was detected while moving
messages from a TPF collection support (TPFCS) BLOB to pid The persistent identifier (PID) of the binary large object
memory. (BLOB) that contains the corrupt system work block
(SWB).
System action: The process is stopped and the entry control
block (ECB) exits. The queue is changed to disable adding and Explanation: A corruption in a TPF collection support
retrieving messages from a queue to prevent further loss of (TPFCS) BLOB was detected while moving messages from the
message data from the corrupt queue. BLOB to memory.
User response: Do the following: System action: The process is stopped and the entry control
1. Determine the cause of the problem by reviewing the block (ECB) returns to the caller.
system error dump.
User response: Review the system error dump to determine
2. Correct the problem. the cause of the error.
009319 009323
Program: CMQS Program: CMQS
Error Message: MQ COMMIT LOGIC ERROR Error Message: MQSERIES UNEXPECTED TO2 ERROR
Explanation: An internal logic error was detected during source_file mqseries_routine TO2_error
commit or rollback processing by the TPF MQSeries resouce Where:
manager.
source_file
System action: The entry control block (ECB) exits and the The location of the source file where the error occurred.
transaction ends.
mqseries_routine
User response: See your IBM service representative. Error code and detailed information about the MQSeries
function that failed because of the error.
009320 TO2_error
Detailed information from TPF collection support
Program: CMQS
(TPFCS) about the error.
Note: The following Error Messages have the same System Explanation: An unexpected database or logic error occurred
Action and User Response. during processing.
Error Message: MESSAGE NOT FOUND IN XMITQ - queue System action: The MQSeries function that was being
name processed ended and an error condition was reported to the
application that started the function.
Where:
User response: See your IBM service representative and
queue name provide the following:
The name of the transmission queue (XMITQ).
v The accompanying dump.
Explanation: This is a program logic error in TPF MQSeries. v Information that was included in the error message.
190 TPF Messages (System Error, Offline, and Program Status Word)
009324 • 00C102
System action: One of the following occurs: Explanation: A WLOGC macro request passed a DATALIST
v If the TPF system was in NORM state at the time of the containing more than 32 KB of data.
error, an IPL is performed. System action: The entry control block (ECB) exits and the
v If the TPF system had not yet cycled to NORM state by the commit scope ends as if a TXRBC macro or tx_rollback C
time the error occured, the ECB that encountered the error function was called. If the entry was activated from an online
exits. workstation, the operator is notified.
User response: Review the dump to determine the User response: Review the system error dump to determine
characteristics of the queue corruption. To help you determine why a logic error occurred.
the cause of the problem, the dump includes a QDEF tag
identifying the queue definition to which the corrupt message 00C101
is chained. Additionally, if you previously entered the ZASER
command with the LONG parameter specified, the dump will Program: CCEB
contain system work blocks (SWBs) and system heap. (The
Error Message: EXIT REQUESTED, TRANSACTION NOT
c$mqmg.h header file contains information that maps out the COMMITTED
structure of the queue definition and the messages contained
on that queue.) Appended Message: None.
If you continue to receive this error in NORM state, complete Explanation: You attempted to exit while in a commit scope.
the following steps:
System action: The entry control block (ECB) exits and the
1. Once an IPL is performed as a result of this error, wait commit scope ends as if a TXRBC macro or tx_rollback C
until the system cycles to 1052 state. function was called. If the entry was activated from an online
2. Enter the ZMQSC CLEAR QL command with the FORCE workstation, the operator is notified.
parameter specified to completely clear the queue that has User response: Modify the program to commit the database
become corrupt. changes.
If you continue to receive this error below NORM state, IPL the
TPF system. If you receive the error again after this IPL, enter 00C102
the ZMQSC CLEAR QL command with the FORCE parameter Program: CL11
specified to completely clear the queue that has become
corrupt. Error Message: RECOVERY LOG ESFAC ERROR
ENCOUNTERED
See TPF Operations for more information about the ZASER and Appended Message: None.
ZMQSC CLEAR QL commands.
Explanation: An error condition was returned from ESFAC
when accessing record 0 of the recovery log during log
009325 takeover processing.
Program: CUIU System action: Log takeover processing ends abnormally. The
processor log is not recovered.
Error Message: MQSERIES CHANNEL CHECKPOINT
FILING FAILED User response: Review the system error dump to determine
the cause of the error. You may need to recover or initialize
Explanation: An error occurred when the TPF system tried to the recovery log of the other processor again.
file an MQSeries channel checkpoint record.
System action: A system error dump is issued and the entry Note: If this dump occurs during system restart, it will occur
control block (ECB) exits. before tape restart and will result in a NODUMP. A
printer must be attached to the system to process this
User response: Do the following: dump.
1. Review the SUD values for the data event control blocks
(DECBs) in the system error dump to determine the cause
of the I/O errors.
2. Correct the errors.
Program: CL21 1. Review the system error dump to determine why the logic
error occurred.
Error Message: VALIDATION ERROR ON RECOVERY LOG
CHECK POINT RECORD Note: Register 4 contains the address of the next buffer.
Appended Message: None. 2. Review the buffer to determine if any corruption has
occurred that could reflect a false buffer-in-use condition.
Explanation: The checkpoint record points to the track that is
to be read first during recovery. The data in this record did
not verify the data in the checkpoint record. 00C107
System action: The validity of the start point data in the Program: CL20
checkpoint record is compromised. The entire log is reviewed
Error Message: UNABLE TO FIND TMCR FOR LSN
to discover the recovery point. If no other problems occur, the
UPDATE
log has been recovered successfully.
Appended Message: None.
User response: Review the system error dump and determine
why the validation error occurred. The information displayed Explanation: Processing of TANCC LOCATE returned a not
contains the data from the checkpoint record and the track found condition. WLOGC processing is attempting to update
header. the transaction manager control record (TMCR) with the
assigned log sequence number.
Note: If this dump occurs during system restart, it will occur
System action: The TMCR is not updated and control returns
before tape restart and result in a NODUMP. A printer
to the mainline path, where normal processing continues. This
must be attached to the system to process this dump.
is a logic error and may cause the recovery log activity
pointers to be incorrectly updated, resulting in a log full
00C105 condition.
Program: CEFJ, CEFL User response: Review the system error dump to determine
why the logic error occurred.
Error Message: FNSPC NOT ALLOWED IN ACTIVE
COMMIT SCOPE Register 14 contains the return code from the TANCC macro.
The dump also contains the contents of the recovery log
Error Message: FLSPC NOT ALLOWED IN ACTIVE header, which could contain an exchange identification (XID)
COMMIT SCOPE that is not valid.
Appended Message: None.
192 TPF Messages (System Error, Offline, and Program Status Word)
00C109 • 00C10D
Note: Register 14 contains the return code from the System action: The entry control block (ECB) exits and the
TANCC macro. commit scope ends as if a TXRBC macro or tx_rollback C
function was called. If the entry was activated from an online
2. Take the action recommended in the return code from the
workstation, the operator is notified.
TANCC macro.
User response: Review the system error dump to determine
why the logic error occurred.
00C109
Program: CL30 Note: Register 14 contains the return code from the TANCC
macro.
Error Message: $GETRC ERROR - INVALID RMID
DETECTED
00C10C
Appended Message: None.
Program: CL21
Explanation: A resource manager logic error occurred. The
passed resource manager ID (RMID) was reviewed and found Error Message: RECOVERY LOG FACE ERROR
to be outside of the permitted range. ENCOUNTERED
System action: The entry control block (ECB) exits and the Error Message: RECOVERY LOG FIND ERROR
commit scope ends as if a TXRBC macro or tx_rollback C ENCOUNTERED
function was called. If the entry was activated from an online
workstation, the operator is notified. Appended Message: None.
User response: Review the system error dump to determine Explanation: An error condition was returned while
why the logic error occurred. accessing a recovery log record. This error indicates a FACE
table (FCTB) or hardware error.
Note: Register 2 contains the incorrect RMID that was passed System action: The recovery log cannot be processed. If the
to the $GETRC service routine. host log is being processed, the dump exits the restart entry
control block (ECB) and the system cycle is inhibited. If
another processor log is being processed (that is, a log
00C10A
takeover), processing ends abnormally and the log is not run.
Program: CL30
User response: Review the system error dump and determine
Error Message: $RETRC ERROR - INVALID RMID why the error occurred.
DETECTED
Note: If this dump occurs during system restart, it will occur
Appended Message: None.
before tape restart and will result in a NODUMP. A
Explanation: A resource manager logic error occurred. The printer must be attached to the TPF system to process
passed resource manager ID (RMID) was reviewed and found this system error dump.
to be outside of the permitted range.
System action: The entry control block (ECB) exits and the 00C10D
commit scope ends as if a TXRBC macro or tx_rollback C
Program: CL21
function was called. If the entry was activated from an online
workstation, the operator is notified. Error Message: TRACK READ/VALIDATION ERROR
ENCOUNTERED
User response: Review the system error dump to determine
why the logic error occurred. Appended Message: None.
Explanation: A validation error occurred while reading the
Note: Register 2 contains the incorrect RMID that was passed
log back to the recovery point. A validation error is detected if
to the $RETRC service routine.
there is a break in log sequence numbers between tracks or
between records on a track. This dump is issued by the CL21
program, but the validation error is detected by the CL24
program.
system error is issued and the recovery log is initialized again. Note: If this system error occurs during TPF system restart, it
will be before tape restart and will result in a
Note: You can modify the System Action by using the CL99 NODUMP. A printer must be attached to the TPF
user exit. system to process this system error dump.
System action: The following actions occur: User response: Review the system error dump to determine
why the logic error occurred.
1. The dump is issued.
2. The recovery log buffer that is being processed is marked
to indicate that a read error occurred. 00C111
3. The entry control block (ECB) exits. Program: CXAOPN, CXASTR, CXAEND, CXAPRP,
CXACMT, CXARLB, CXARCV, CXPCMT, CXPRLB, or
Note: You can modify the System Action by using the CL99 CXPRCV in CTAL.
user exit. Error Message: XA PROTOCOL VIOLATION IS DETECTED
User response: Review the system error dump and determine BY RM
why the FACE error occurred. Appended Message: None.
Note: If this system error occurs during TPF system restart, it Explanation: A transaction manager logic error occurred. A
will occur before tape restart and will result in a protocol violation was detected by the resource manager (RM)
NODUMP. A printer must be attached to the TPF when one of the following functions is called: xa_open,
system to process this system error dump. xa_start, xa_end, xa_prepare, xa_commit, xa_rollback,
xa_recover, xa_cmt_pool, xa_rlb_pool, or xa_rcv_pool.
00C10F System action: The entry control block (ECB) exits and the
commit scope ends as if a TXRBC macro or tx_rollback C
Program: CL21 function was called. If the entry was activated from an online
workstation, the operator is notified.
Error Message: FIND ERROR ON RECOVERY LOG CHECK
POINT RECORD User response: Review the system error dump to determine
why the logic error occurred.
Appended Message: None.
Explanation: An error condition was returned while
00C112
accessing the recovery log checkpoint record.
Program: CXACMP, CXAFGT, or CAXCLS in CTAL
System action: A dump is issued and processing continues.
The validity of the start point data in the checkpoint record is Error Message: UNSUPPORTED XA FUNCTION IS CALLED
compromised. The entire log is reviewed to determine the
recovery point. If no other problems occur, the log has been Appended Message: None.
recovered successfully. Explanation: A transaction manager logic error occurred. One
of the following unsupported XA functions was called:
Note: This system error is expected the first time the TPF xa_complete, xa_forget, or xa_close.
system is IPLed with recovery log support.
System action: The entry control block (ECB) exits and the
User response: Review the system error dump to determine commit scope ends as if a TXRBC macro or tx_rollback C
why the error occurred. function was called. If the entry was activated from an online
workstation, the operator is notified.
194 TPF Messages (System Error, Offline, and Program Status Word)
00C113 • 00C117
User response: Review the system error dump to determine Note: You have the ability to change how the system
why the logic error occurred. responds by using the Log Error Recovery Processing
(CL99) user exit. See TPF System Installation Support
Reference for more information about this user exit.
00C113
User response: Review the system error dump to determine
Program: CCOMIC in CTAL why both writes failed.
Error Message: TX_RESUME_TPF IS ISSUED WITHOUT A
PRIOR TX_SUSPEND_TPF CALL Note: If this system error occurs during TPF system restart,
the error will occur before tape restart and will result in
Appended Message: None. a NODUMP . A printer must be attached to the TPF
Explanation: The application program did not call the system to process this system error dump.
tx_suspend_tpf function before calling the tx_resume_tpf
function. 00C116
System action: The entry control block (ECB) exits and the Program: CL22
commit scope ends as if a TXRBC macro or tx_rollback C
function was called. If the entry was activated from an online Error Message: RECOVERY LOG FACE ERROR
workstation, the operator is notified. ENCOUNTERED
User response: Review the system error dump to determine Appended Message: None.
why the logic error occurred.
Explanation: An error condition was returned from the file
address compute program (FACE) when accessing a recovery
00C114 log record.
occurs depending on the state of the TPF system when the the recovery log can cause the following error conditions to be
error occurs: detected:
v During normal processing this dump is always catastrophic. v A configuration error will occur if:
v During recovery, IPLing of the processo will cause, a – The recovery log has been moved to a different device
noncatastrophic to be issued; the cycle inhibit switch will be type with a different number of records per track.
set; and CL22 will exit. Cycle up will not continue, but the – The recovery log has been reallocated with more or less
TPF system will be available to enter commands. records.
v During log takeover of another processor's log, for
destructive IPL or forced deactivation, a noncatastrophic This condition can also occur if the checkpoint record is
dump will be issued, take over processing will be aborted, corrupted.
and the entry control block (ECB) will be allowed to
v A validation error will occur if the recovery log is
complete the IPL or the forced deactivation process.
reallocated to a different location, resulting in an ID or
record code check (RCC) failure when the first log record is
Note: You have the ability to change how the system retrieved.
responds by using the Log Error Recovery Processin
(CL99) user exit. See TPF System Installation Support
Note: This system error dump is expected the first the TPF
Reference for more information about this user exit.
system is IPLed with recover log support.
User response: Review the system error dump to determine
System action: The recovery log cannot be processed if its
why the error occurred. The recovery log may be too small
allocation characteristics have been changed. The recovery log
and may need to be reallocated. You can IPL the TPF system
is initialized again and system restart continues.
to recover and empty the log.
Note: You can modify the System Action by using the CL99
Note: If this system error occurs during TPF system restart,
user exit.
the error will occur before tape restart and will result in
a NODUMP . A printer must be attached to the TPF User response: If this system error dump is unexpected,
system to process this system error dump. examine it to determine if it was caused by checkpoint record
corruption.
00C118
Note: If this system error occurs during TPF system restart, it
Program: CL21 will occur before tape restart and will result in a
NODUMP. A printer must be attached to the TPF
Error Message: INSUFFICIENT STORAGE TO RECOVER system to process the system error dump.
DATA FROM LOG
Appended Message: None.
00C11A
Explanation: An error condition was returned from MALOC
Program: CL30
when requesting storage for a log record.
Error Message: $RELRC ERROR - TMCR RELEASE WITH
System action: The recovery log cannot be processed. The
RMCR STILL ACTIVE
dump exits the restart entry control block (ECB) and system
cycle is inhibited. Appended Message: None.
Explanation: A transaction manager control record (TMCR) is
Note: You can modify the System Action by using the CL99
being released and an associated resource manager control
user exit.
record (RMCR) is still active.
User response: Review the system error dump and determine
System action: The associated RMCR is released and
why the MALOC error occurred.
processing continues.
Note: If this system error occurs during TPF system restart, it User response: Review the system error dump to determine
will occur before tape restart and will result in a why the resource manager (RM) did not release the TMCR.
NODUMP. A printer must be attached to the TPF The system error dump contains a copy of both the TMCR
system to process this system error dump. and the RMCR.
00C119 00C11B
Error Message: CONFIGURATION ERROR - RECOVERY Error Message: LOGIC ERROR - CCR HAS BAD RHT
LOG LOST POINTER
196 TPF Messages (System Error, Offline, and Program Status Word)
00C11C • 00C121
System action: The ECB exits and the RHT lock is released. Appended Message: None.
User response: See your IBM service representative. Explanation: You attempted to access a record that is part of
a suspended commit scope set.
00C11C System action: The entry control block (ECB) exits and the
commit scope ends as if a TXRBC macro or tx_rollback C
Program: CEFH function was called. If the entry was activated from an online
Error Message: HOLD OF RECORD IN SUSPENDED workstation, the operator is notified.
COMMIT SCOPE User response: Determine why the program was trying to
Appended Message: None. access a record in a suspended commit scope.
System action: The entry control block (ECB) exits and the Program: CVF3
commit scope ends as if a TXRBC macro or tx_rollback C Error Message: FINSC P/D IN ACTIVE COMMIT SCOPE
function was called. If the entry was activated from an online
workstation, the operator is notified. Error Message: FILSC P/D IN ACTIVE COMMIT SCOPE
User response: Review the requirement for the hold locks. Appended Message: None.
Explanation: You attempted to use the FINSC or FILSC
00C11D macros while a commit scope was active.
Program: CEFH System action: The entry control block (ECB) exits and the
commit scope ends as if a TXRBC macro or tx_rollback C
Error Message: UNHOLD OF RECORD IN SUSPENDED function was called. If the entry was activated from an online
COMMIT SCOPE workstation, the operator is notified.
Appended Message: None. User response: Do one of the following:
Explanation: You attempted to unhold a record that is part of v Remove the FINSC or FILSC macro call from the commit
a suspended commit scope. scope.
System action: The entry control block (ECB) exits and the v If the FINSC or FILSC macro call is necessary, end or
commit scope ends as if a TXRBC macro or tx_rollback C suspend the commit scope before the macro call.
function was called. If the entry was activated from an online
workstation, the operator is notified. 00C121
User response: Review the requirement for the hold locks. Program: CVF3
Error Message: NO AVAILABLE VFA BUFFER
00C11E
Appended Message: None.
Program: CEFH
Explanation: This is an out-of-resource error that indicates
Error Message: INVALID RECORD HOLD COUNT IN ECB one of the following application problems:
RESET
v The TPF system is not tuned correctly.
Appended Message: None. v The TPF system does not have enough system resources.
Explanation: During rollback processing, records that are
held by the application in the commit scope are released and When an entry control block (ECB) writes a record in a
the record hold count in the entry control block (ECB) is commit scope, the data is saved in a commit buffer. Commit
adjusted. The record hold count in the ECB should never be buffers are taken from virtual file access (VFA) as needed. This
negative; this dump is taken during rollback processing when system error occurs during record file processing when the
the TPF system detects a negative record hold count. TPF system is not able to find an available VFA buffer to use
as a commit buffer.
System action: Rollback processing continues. Indicators are
set to force cleanup of the record hold table during exit System action: The ECB exits.
processing. Control returns to the ECB. This dump may be
User response: Do one of the following to determine the
followed by an 0000FC system error indicating that the user
cause of the out-of-VFA buffer condition:
ECB may have tried to hold more than 256 records.
v Run data collection and reduction.
User response: See your IBM service representative.
v Enter the ZVFAC INDICATE command and the ZVFAC
DISPLAY command with the BUFFER parameter specified
00C11F to determine why there are no available VFA buffers.
Program: CVF3
If a single ECB used too many VFA buffers as commit buffers,
Error Message: ATTEMPTED ACCESS OF SUSPENDED enter the ZCTKA ALTER command with the MCMTB
RECORD parameter specified to set the maximum commit buffers
allowed per ECB. If the spontaneous load on the system is
198 TPF Messages (System Error, Offline, and Program Status Word)
00C133 • 00C139
User response: Review the system error dump to determine User response: Change the program so it does not call a
why storage is not available. ROUTC or SENDC macro with CLASS A, B, C, or L in a
commit scope.
00C133
00C137
Program: CXARCV (CTAL)
Program: CVIA
Error Message: TMSTARTSCAN FLAG IS NOT SET WHEN
CALLING XA_RECOVER FUNCTION Error Message: CHAIN MESSAGE IS SENT WITHIN A
COMMIT SCOPE
Appended Message: None.
Appended Message: None.
Explanation: The xa_recover function of the DASD resource
manager requires that the flag parameter be set to Explanation: A chain message is sent in a commit scope from
TMSTARTSCAN. the CVIx package.
System action: The entry control block (ECB) exits and state System action: The entry control block (ECB) exits after the
change is inhibited. SERRC is taken.
User response: Ensure that any program calling the User response: Change the program so that the chain
xa_recover function of the DASD resource manager sets the message is not sent in a commit scope.
TMSTARTSCAN flag when issuing the function call.
00C138
00C134
Program: CVF3
Program: CXARCV (CTAL)
Error Message: USER MAXIMUM RECORDS IN COMMIT
Error Message: XID OVERFLOWED IN XA_RECOVER SCOPE EXCEEDED
FUNCTION
Appended Message: None.
Appended Message: None.
Explanation: The number of records in the commit scope is
Explanation: The program calling the xa_recover function of about to exceed the limit set for your TPF system.
the DASD resource manager does not provide enough space
System action: The entry control block (ECB) exits and the
in the XIDS parameter to hold transaction branches that need
commit scope is rolled back.
to be recovered.
System action: Return to the caller after the dump is taken. User response: Do the following:
1. Review the system error dump to determine if you need to
User response: Ensure that any program calling the increase the commit scope record limit.
xa_recover function of the DASD resource manager provides
2. Enter the ZCTKA ALTER command with the MCMTB
enough storage to hold all of the transaction branches that
need to be recovered. parameter specified to increase the commit scope record
limit, if appropriate.
00C135 See TPF Operations for more information about the ZCTKA
ALTER command.
Program: CL40
Error Message: NOT ENOUGH SYSTEM HEAP STORAGE
00C139
Appended Message: None.
Program: CCNUCL(CICR)
Explanation: The GSYSC macro is not able to allocate the
Error Message: DEFRC WITH LOCKS HELD AT COMMIT
requested storage.
SCOPE LEVEL
System action: Deadlock detection continues.
Appended Message: None
User response: Review the system error dump to determine
Explanation: The DEFRC macro was called in a commit
why the error occurred.
scope while locks were held at the commit scope level.
System action: The entry control block (ECB) exits after the
00C136
SERRC is taken.
Program: CLXA
User response: Change the program so that the DEFRC
Error Message: ROUTC IS ISSUED WITHIN A COMMIT macro is not called with locks held at the commit scope level.
SCOPE Determine whether it is appropriate to commit all updates
(using the TXCMC macro or tx_commit C function) before
Appended Message: None. calling the DEFRC macro.
Explanation: A ROUTC or SENDC macro with CLASS A, B,
C, or L is called in a commit scope.
System action: The entry control block (ECB) exits after the
SERRC is taken.
Appended Message: None. Note: Register 3 (R3) contains the count of waiting entries
Explanation: System error processing called exit processing, left to be processed. R4 contains the address of the
which detected a system integrity problem. This catastrophic track buffer that is being processed. Review the
dump was caused by one of the following: buffer to determine if any corruption has occurred
that could reflect a false waiters list.
v Main storage control tables, which are used by TPF
transaction services, have been corrupted. 2. Correct the problem.
v An error in TPF transaction services code. 3. If necessary, IPL the TPF system to clear any ECBs that
were not dispatched.
The integrity of the recovery log and the application database
could be compromised if processing continues. 00C200
System action: A catastrophic dump is issued and processing Program: CUPT
stops.
Error Message: POSITIVE FEEDBACK LOG ERROR ON
User response: See your IBM service representative. DATA RECORD
Appended Message: None
00C13D
Explanation: An attempt to calculate the file address of the
Program: CL40 current ordinal record in the positive feedback database was
not successful, or an attempt to read the record was not
Error Message: MERGED FILE ADDRESS TABLE FOR
successful.
DEADLOCK DETECTION IS FULL
System action: The following occurs:
Appended Message: None.
1. The data record is not updated.
Explanation: In a loosely coupled processor complex, the
2. Positive feedback support is exited.
deadlock detection process allocates storage for a merged file
address table that is used to merge records in the record hold User response: Do the following:
table for all active processors. The merged file address table 1. Verify the correct file address compute program (FACE)
filled up before the merge process completed. Because the table (FCTB) is loaded.
merged file address table is full, there will be missing record
hold table entries and some deadlock conditions may not be 2. Repair the direct access storage device (DASD).
detected. 3. Run the function calling positive feedback support again.
User response: Because the size of the merged address file Program: CUPT
table is limited to 35% of the entry control block (ECB) heap
Error Message: POSITIVE FEEDBACK LOG ERROR ON
storage area, enter the ZCTKA ALTER command with the
CONTROL RECORD
EMPS and MMHS parameters specified to increase the size of
the ECB heap storage. Appended Message: None
200 TPF Messages (System Error, Offline, and Program Status Word)
00C202 • 00C207
Explanation: The control record, ordinal 0, in the positive Appended Message: None
feedback database could not be accessed.
Explanation: The open function was issued to open the
System action: The following occurs: hierarchical file system (HFS) file named in the fileName
1. The positive feedback database is not updated. variable in the CUPT segment, but the open function did not
complete successfully. If the file did not exist, the function
2. Positive feedback support is exited. would have created it.
User response: Do the following: System action: The following occurs:
1. Repair the direct access storage device (DASD). 1. The TPF database is not copied to the HFS database.
2. Run the function calling positive feedback support again. 2. Positive feedback support is exited.
3. The HFS copy will be restarted in 15 minutes.
00C202
User response: Ensure that the proper authorizations exist for
Program: CUPH the HFS file named in the CUPT segment.
3. The HFS copy will be restarted in 15 minutes. 3. The HFS copy will be restarted in 15 minutes.
User response: Do the following: User response: Check the integrity of the file listed for the
HFS file named in the CUPT segment.
1. Ensure that the proper authorizations exist for the HFS
tpf.va. directory.
2. Ensure that the HFS facilities exist. 00C207
Program: CUPH
00C204 Error Message: ERROR OPENING OR CREATING THE HFS
Program: CUPH Appended Message: None
Error Message: ERROR OPENING THE HFS FILE FOR Explanation: The open function was issued with the option to
COPY
create the file if the file does not exist. The open function did System action: The entry control block (ECB) exits.
not complete successfully.
User response: Review the system error dump for database
System action: The following occurs: problems.
1. The TPF database is not copied to the hierarchical file
system (HFS) database. 01F004
2. Positive feedback support is exited.
Program: Displayed on the console and in the dump.
3. The HFS copy will be restarted in 15 minutes.
Error Message: None.
User response: Do the following:
Explanation: The device type field in the agent assembly area
1. Ensure that the proper authorizations exist for the HFS file (AAA) (WA0TYS) or the routing control block (RCB) (CI0TYS)
named in the CUPT segment. is not valid.
2. Check the integrity of the file listed for the HFS file named
System action: A system error is issued and the program is
in the CUPT segment.
exited.
User response: Have your system programmer review the
01F000–01FFFF system error dump to determine the cause of the error and to
correct it.
01F000
01F005
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: None.
Error Message: None.
Explanation: An error occurred because the system is unable
to FILNC the agent assembly area (AAA) (WA0AA) or the Explanation: An error occurred because of a message type
routing control block (RCB) (CI0CO). that is not valid in the output message parameter (UI2MGT).
System action: A system error is issued and the program is System action: A system error is issued and the program is
exited. exited.
User response: Review the system error dump for database User response: Review the system error dump for database
problems or for user error on input. problems or for user error on input.
01F001 01F006
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Explanation: An error occurred because the system is unable Explanation: The output message parameter indicates
to retrieve partially assembled input message. permanent input/output (I/O), but the input message
(MI0MI) was not saved.
System action: The entry control block (ECB) exits.
System action: A system error is issued and the program is
User response: Review the system error dump for database exited.
problems or for user error on input.
User response: Review the system error dump for database
problems or for user error on input.
01F002
Program: Displayed on the console and in the dump. 01F007
Error Message: None. Program: Displayed on the console and in the dump.
Explanation: An error occurred because the system is unable Error Message: None.
to FILNC the terminal control record in the routing control
block (RCB) or the agent assembly area (AAA). Explanation: An error occurred because the system is unable
to retrieve the input message (MI0MI).
System action: The entry control block (ECB) exits.
System action: A system error is issued and the program is
User response: Review the system error dump for database exited.
problems or for user error on input.
User response: Review the system error dump for database
problems or for user error on input.
01F003
Program: Displayed on the console and in the dump. 01F008
Error Message: None. Program: Displayed on the console and in the dump.
Explanation: An input message segment, other than the first, Error Message: None.
was received and the partially assembled message that is
supposed to be on file is missing. Explanation: An error occurred because the system is unable
202 TPF Messages (System Error, Offline, and Program Status Word)
01F009 • 01F011
User response: Review the system error dump for database User response: Review the system error dump for database
problems or for user error on input. problems or for user error on input.
01F012 01F017
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: None. Error Message: None.
Explanation: This error occurred because the system is Explanation: This error occurred because the system is
unable to FILNC the output message block. unable to FILNC the output message block.
System action: A system error is issued and the program is System action: The file addresses associated with the
exited. message are released and processing is ended.
User response: Review the system error dump for database User response: Review the system error dump for database
problems or for user error on input. problems or for user error on input.
01F013 01F018
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: None. Error Message: None.
Explanation: This error occurred because the system is Explanation: This error occurred because the system is
unable to retrieve the output message block. unable to FILNC the scroll map record.
System action: A system error is issued and the program is System action: A system error is issued and the program is
exited. exited.
User response: Review the system error dump for database User response: Review the system error dump for database
problems or for user error on input. problems or for user error on input.
01F014 01F019
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: None. Error Message: None.
Explanation: This error occurred because the system is Explanation: There was a retrieval error on a file copy of the
unable to retrieve the scroll map record. output message block.
System action: A system error is issued and the program is System action: A system error is issued and the program is
exited. exited.
User response: Have your system programmer review the User response: Review the system error dump for database
system error dump to determine the cause of the error and to problems or for user error on input.
correct it.
01F020
01F015
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: None.
Error Message: None.
Explanation: This error occurred because the system is
Explanation: This error occurred because the TPF system is unable to retrieve the output message block.
unable to retrieve the output message block.
System action: A system error is issued and the program is
System action: A system error is issued and the program is exited.
exited.
User response: Review the system error dump for database
User response: Review the system error dump for database problems or for user error on input.
problems or for user error on input.
01F021
01F016
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: None.
Error Message: None.
Explanation: This error occurred because the system is
Explanation: A FIND error occurred while retrieving an unable to retrieve the output message block.
output message block.
System action: A system error is issued and the program is
System action: A system error is issued and the program is exited.
exited.
User response: Review the system error dump for database
204 TPF Messages (System Error, Offline, and Program Status Word)
01F022 • 01F01A
Error Message: None. If there is no return to the user, the following occurs:
Explanation: An error was returned to UIM1 that indicates v The message number is set
that the display was unable to reformat the agent assembly
v Levels 0, 2, 4, 5, and 6, if in use, are released
area (AAA).
v ENTDC ASL4 is released.
System action: A system error is issued and the program is
exited. User response: Review the system error dump for database
problems or for user error on input.
User response: Review the system error dump for database
problems or for user error on input.
01F027
01F023 Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump. Error Message: None.
Error Message: None. Explanation: An error occurred because the system is unable
to route the output message.
Explanation: This error occurred because the output message
block is not valid. System action: A system error is issued and the program is
System action: The file addresses associated with the exited.
message are released and processing is ended. User response: Review the system error dump for database
User response: Review the system error dump for database problems or for user error on input.
problems or for user error on input.
01F028
01F024
Program: UIS3
Program: Displayed on the console and in the dump.
Error Message: None.
Error Message: None.
Explanation: There was an error in filing the agent assembly
Explanation: The application program is not available in the area (AAA) or the routing control block (RCB).
application table (UIIA).
System action: The entry control block (ECB) exits.
System action: A system error is issued and the program is
exited. User response: Have your system programmer review the
system error dump to determine the cause of the error and to
User response: Review the system error dump for database correct it.
problems or for user error on input.
01F029
01F025
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: None.
Error Message: None.
Explanation: An FILNC error occurred on the agent assembly
Explanation: This error occurred because the canned message area (AAA) or the routing control block (RCB).
number contained in the output message parameter is too
high or the canned message record was altered. System action: A system error is issued and the program is
exited.
System action: A system error is issued and the program is
exited. User response: Review the system error dump for database
problems or for user error on input.
User response: Review the system error dump for database
problems or for user error on input.
01F01A
01F026 Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump. Error Message: None.
Error Message: None. Explanation: There was a retrieval error on an old copy of
Explanation: There was a retrieval error for the terminal map the scroll map record.
record.
System action: A system error is issued with a return option
System action: A system error dump is issued. and processing is continued.
If returned to the user, the following occurs: User response: Review the system error dump for database
problems or for user error on input. to file the output message block again.
If the program remains unsuccessful, R2 is reset to 1 and the
01F01B entry control block (ECB) exits.
Program: CVIT User response: Have your system programmer review the
system error dump to determine the cause of the error and to
Error Message: None. correct it.
Explanation: The message assembly table (MAT) is full. The
size of the table is defined in DCTMAT. 01F122
System action: A system error is issued and the program is Program: Displayed on the console and in the dump.
exited.
Error Message: None.
User response: Review the system error dump for long
messages or storage corruption. Explanation: Routine CIAB of the Communications Source
program (CIAA) uses this message when an error occurs while
mapping a message for output to a remote 3270 display to
01F01E clear the system line.
Program: Displayed on the console and in the dump. System action: The CIAB releases any block held on level 0,
Error Message: None. references the original first segment from the workstation, and
continues to process normally.
Explanation: The WA0DCA field in the agent assembly area
(AAA) or the CI0DCA field in the routing control block (RCB) User response: Review the system error dump to determine
is not valid. the cause of the problem and to correct it.
extname
01F120 The external method name.
206 TPF Messages (System Error, Offline, and Program Status Word)
0200D2 • 0200F0
ZOODB SET command) is turned on. occur for either arrays, binary large objects (BLOBs), logs, or
keyed log collections. These collections all use the underlying
System action: Processing continues. support structure known as flat file structure.
User response: See your IBM service representative. System action: A system error dump is issued and the
See TPF Operations for more information about the ZOODB update continues. Because the object is locked, TPF collection
SET command. support assumes that the records are the latest copies and,
therefore, will correct the counters and continue with the data
update.
0200FA
User response: The error is informational because it is likely
Program: CJ015 (CJ00) that the actual problem that caused the mismatch occurred
previously. If the error becomes a concern, determine if there
Error Message: CLASS-classname METHOD-intname, extname
is some common thread or pattern involved with the objects
Appended Message: TO2 UNABLE TO ALLOCATE MALOC that are receiving the system error dumps.
STORAGE. DETAIL CODE code
Where: 020403
208 TPF Messages (System Error, Offline, and Program Status Word)
020406 • 020408
User response: The error is informational because it is likely Appended Message: DS – DS REASON – reasoncode OLD.PID
that the actual problem that caused the mismatch occurred – oldpid NEW.PID – newpid
previously. If the error becomes a concern, determine if there
Where:
is some common thread or pattern involved with the objects
that are receiving the system error dumps. DS The name of the data store (DS) whose collection for
storing browse names has been re-created.
020407 reasoncode
The returned TPF collection support error code that
Program: CJ022 (CJ00)
caused the collection to be re-created.
Error Message: METHOD=recreateRecoupOID, RECOUP
oldpid
NAME COLLECTION HAS BEEN RECREATED
The persistent identifier (PID) of the old collection being
replaced.
reasonCode
020409
The returned TPF collection support (TPFCS) error code
Program: CJ022 (CJ00) that caused the collection to be re-created.
210 TPF Messages (System Error, Offline, and Program Status Word)
02040B • 0210F3
0210F4 02F650
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
User response: Your system programmer should determine User response: Have your system programmer review the
the dump to determine the cause of the error and to correct it. system error dump to determine the cause of the error and to
correct it.
0210F5
02F651
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: INVALID FACE ORDINAL
Error Message: None.
Explanation: The ordinal number supplied to the file address
compute program (FACE) was not valid. WGR1 is unable to Explanation: A FIND error occurred in retrieving an agent
retrieve the requested record. assembly area (AAA) initialization data record.
System action: The entry control block (ECB) ends. System action: The UNABLE TO PROCESS message is sent
to the operator or returned to the calling segment with the
User response: Have your system programmer review the error indicator on.
system error dump to determine cause of the error and to
correct it. If the UAT record is being held, it is released.
System action: WRG1 initializes the RCB again and files it. Explanation: The agent assembly area (AAA) address
Processing is continued normally. retrieved by WGR1 was not valid.
User response: The system error dump will contain a copy of System action: A system error is issued and processing is
the corrupted RCB on level F. The header of this RCB will continued with the next entry.
contain the name of the program that last filed it.
User response: Have your system programmer review the
Your system programmer should review the logic of this system error dump to determine the cause of the error and to
program to determine why the RCB was corrupted. correct it.
041000–041FFF
212 TPF Messages (System Error, Offline, and Program Status Word)
041000 • 041006
041000 041004
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: None. Error Message: None.
Explanation: A request to the file address compute program Explanation: An error was returned from the file address
(FACE) to supply the address of the recoup working keypoint compute program (FACE) that calculated the address of the
retrieved an error indicator. directory ordinal record.
System action: The ECB is exited and the requested function System action: The ECB is ended.
is not formed.
User response: Your system programmer should review the
User response: Your system programmer should review the dump and check the @BRCPB global for the correct ordinal
dump as well as the allocation of the recoup working keypoint
number of the recoup master keypoint record.
board.
If this is valid, review the FACE error.
041001
041005
Program: Displayed on the console and in the dump.
Error Message: RECOUP IS ABORTING Program: Displayed on the console and in the dump.
User response: Do the following: Error Message: TPFCS TIMEOUT ON DATA STORE dsname
1. Contact your system programmer to review the dump to Where:
determine how the directory ordinal record was overlaid.
dsname
2. Correct the error.
The name of the data store that timed out.
3. Start recoup again.
Explanation: At least one entry control block (ECB) did not
end normally when the timeout threshold was reached after
041003 the last ECB for a TPF collection support (TPFCS) data store or
selective persistent identifier (PID) was generated. This dump
Program: Displayed on the console and in the dump.
is accompanied by online message that indicate the PIDs that
Error Message: RECOUP ABORTING DUE TO TIME-OUT timed out.
Explanation: An item timed out during recoup phase I System action: Processing ends for the associated data store
processing. or selective PID and recoup processing continues.
System action: If recoup phase I is completed, processing is User response: Have your system programmer review the
continued. dump to determine the cause of the timeout error and to
correct it.
If recoup phase I is still in progress, recoup is aborted.
See TPF Database Reference for more information about recoup
User response: Your system programmer should review the functions and procedures.
dump to determine the cause of the timeout error and to
correct it.
041008 04100C
Program: Displayed on the console and in the dump. Program: BOF2
Error Message: FACE/FIND ERROR #SONSV - REST Error Message: BOF2 -- FACE ERROR
CONTINUING
Explanation: The ZRECP DISPLAY command was entered,
Explanation: The ZRDIR START RESTORE command was but an error condition was detected by a FACS-type call while
entered, but an error condition was detected by a FACE-type trying to resolve the file address for #IBMM4 ordinal #LTDRT.
or a FIND-type call while trying to retrieve a recoup SONRI
System action: The command fails.
save area (#SONSV) record.
User response: Do the following:
System action: The record is not restored, but restore
processing continues with the next record ordinal. 1. Determine the cause of the error.
2. Correct the error.
User response: Do the following:
1. Determine the cause of the error. 3. Enter the ZRECP DISPLAY command again.
See TPF Operations for more information about the ZRECP 04100D
START RESTORE command.
Program: BLOH
Error Message: FACE ERROR ON FC33 RECORD – UNABLE
04100A
TO SWITCH BLOG ORDINALS
Program: BRTD
Explanation: BLOH attempted to compute the FARF address
Error Message: #SONSV/#SONRI DO NOT MATCH of the new ordinal in the #RC8RFS fixed record while
switching FC33 records for inactive processors, but an error
Explanation: The ZRDIR START RESTORE command was was returned from the FACS call.
entered, but the ID or record code check (RCC) of the recoup
SONRI save area (#SONSV) record did not match the ID or System action: If this is a PDU, PDU is ended. If this is a
RCC of the pool rollin directory (#SONRI) record. recoup run, recoup is ended.
System action: The record is not restored, but restore User response: Do the following:
processing continues with the next record ordinal. 1. Review the beginning and ending ordinals (#RC8RFS fixed
User response: Do the following: record type) for all processors.
1. Determine the cause of the error. 2. Verify that these ordinals are correct and are properly
defined and initialized on the system.
2. Correct the error.
See TPF Operations for more information about the ZRECP 04100F
START RESTORE command. Program: BPDH
Error Message: ERROR LOGGING RECORD FIND ERROR
Explanation: There was a FIND error on the Error Logging
(C404C) record.
214 TPF Messages (System Error, Offline, and Program Status Word)
041010 • 041014
041011 041014
Error Message: PSEUDO DIRECTORY FIND ERROR - RUN Error Message: FIND ERROR #KY9CPY - RESTORE
ABORTED ABORTED
Explanation: A FIND-type error occurred while trying to Explanation: The ZRDIR START RESTORE command was
retrieve the recoup merged directory (#SONRPM) record. entered, but an error occurred while attempting to find the
saved copy of keypoint 9 in the #IBMM4 fixed file record type
System action: Recoup directory rollin ends without at #KP9CPY.
completing.
System action: The ECB exits. Keypoint 9, the pool section
User response: Do the following: keypoint tables (CY2KT), and the pool directories were not
1. Determine the cause of the error. restored.
2. Correct the error. User response: Do the following:
3. Start recoup processing again. 1. Examine the system error dump to determine the cause of
the problem.
See TPF Database Reference for more information about recoup 2. Correct the problem.
functions and procedures.
3. Enter the ZRDIR START RESTORE command again.
Error Message: FIND ERROR KEYPOINT 9 - RESTORE
ABORTED
Explanation: The ZRDIR START RESTORE command was 1. Using the contents of field EBXSW4 in the system error
entered, but an error occurred while attempting to find dump, review segment CYH6 to determine the cause of the
keypoint 9. problem finding CY2KT.
System action: The ECB exits. Keypoint 9, the pool section 2. Correct the problem.
keypoint tables (CY2KT), and the pool directories were not 3. Enter the ZRDIR START RESTORE command again.
restored.
Error Message: FILE ERROR CY2KT - RESTORE ABORTED
User response: Do the following:
Explanation: The ZRDIR START RESTORE command was
1. Using the contents of field EBXSW1 in the system error entered, but an error occurred while attempting to file the
dump, review segment CYYM to determine the cause of saved copy of a pool section keypoint table (CY2KT) to the
the failure to find keypoint 9. working copy of the CY2KT.
2. Correct the problem.
System action: The ECB exits. The pool directories have been
3. Enter the ZRDIR START RESTORE command again. restored with some or all of the pool section keypoint tables
Error Message: FILE ERROR KEYPOINT 9 - RESTORE (CY2KT), but keypoint 9 is not restored.
ABORTED User response: Do the following:
Explanation: The ZRDIR START RESTORE command was 1. Examine the system error dump to determine the cause of
entered, but an error occurred while attempting to file the the problem.
saved copy of keypoint 9 (#KP9CPY) to the working copy of 2. Correct the problem.
keypoint 9.
3. Enter the ZRDIR START RESTORE command again.
System action: The ECB exits. The pool directories have
already been restored with some or all of the pool section See TPF Operations for more information about the ZRDIR
keypoint tables (CY2KT), but keypoint 9 is not restored. START RESTORE command.
User response: Do the following:
1. Examine the system error dump to determine the cause of 041100
the problem.
Program: Displayed on the console and in the dump.
2. Correct the problem.
Error Message: RECP — INVALID RCC FOR SON
3. Enter the ZRDIR START RESTORE command again.
DIRECTORY RECORD
See TPF Operations for more information about the ZRDIR Explanation: The BRYG segment was given an ID that is not
START RESTORE command. valid for the specific pool record or the ordinal number used
to calculate the directory record address was exceeded the
range for the given record ID.
041015
System action: Processing is continued.
Program: BRTD
User response: Your system programmer should review the
Error Message: FIND ERROR #CY2CPY - RESTORE dump to determine the cause of the error and to correct it.
ABORTED
See the record ID in the directory rerun table of the BRYG
Explanation: The ZRDIR START RESTORE command was segment.
entered, but an error occurred while attempting to find the
saved copy of a pool section keypoint table (CY2KT) from the
#CY2CPY fixed file record type. 041101
System action: The ECB exits. Some pool section keypoint Program: Displayed on the console and in the dump.
tables (CY2KT) and pool directories may have been restored,
Error Message: RECP BAD RPE TAPE
but keypoint 9 has not been restored.
Explanation: The following errors may have occurred:
User response: Do the following:
v The RPE was not created properly by Phase 2 processing.
1. Examine the system error dump to determine the cause of
the problem. v There was a tape read error.
2. Correct the problem. v In the case of multiple subsystem support, the Phase 2
offline program was not the correct program for this
3. Enter the ZRDIR START RESTORE command again.
subsystem.
Error Message: FIND ERROR CY2KT - RESTORE ABORTED
System action: A message is sent to the operator to resume
Explanation: The ZRDIR START RESTORE command was or to abort.
entered, but an error occurred while attempting to find the
User response: Do the following:
working copy of the pool section keypoint tables (CY2KT).
1. See your system programmer to review the dump to
System action: The ECB exits. The pool section keypoint determine the cause of the error and to correct it.
tables (CY2KT) and some pool directories may have been
2. Restart by issuing a ZRECP RESUME ORD or ABORT
restored, but keypoint 9 has not been restored.
command.
User response: Do the following:
Error Message: RECP PSEUDO DIRECTORY RECORD
216 TPF Messages (System Error, Offline, and Program Status Word)
041102 • 041107
Explanation: During recoup processing, an error condition 1. See your system programmer to review the dump to
was detected by a FACS-type call or FIND-type macro while determine the cause of the error and to correct it.
trying to retrieve a recoup merged directory (#SONRPM) 2. Enter the ZRECP RESUME or ZRECP ABORT command to
record. restart.
System action: Recoup directory rollin processing ends
without completing. 041105
User response: Do the following: Program: Displayed on the console and in the dump.
1. Determine the cause of the error.
Error Message: None.
2. Correct the error.
3. Start recoup processing again. Explanation: The program is unable to read either Phase 1 or
Phase captured directory.
See TPF Database Reference for more information about recoup Any of the following errors may have occurred:
functions and procedures. See TPF System Macros and TPF v The RPE was not created properly by Phase 2 processing.
Application Programming for more information about the FACE
program and the FACE interface. v There was a tape read error.
v In the case of multiple subsystem support, the Phase 2
offline program was not the correct program for this
041102 subsystem.
Program: Displayed on the console and in the dump. System action: A message is sent to the operator to resume
Error Message: None. or to abort.
Explanation: Recoup was unable to calculate a general file User response: Do the following:
address within the Phase 1 capture area. In addition, the 1. See your system programmer to review the dump to
ordinal number or record ID was not valid. determine the cause of the error and to correct it.
System action: A message is sent to the operator to resume 2. Enter a ZRECP RESUME or ZRECP ABORT command to
or to abort. restart
Explanation: Recoup was unable to calculate a general file User response: Your system programmer should review the
address within the Phase 3 capture area. In addition, the dump to determine the cause of the error, correct it, and then
ordinal number or record ID was not valid. resume recoup. Otherwise, recoup should be aborted.
System action: A message is sent to the operator to resume It may also be helpful to obtain copies of the Phase 1 and
or to abort. Phase 3 directories for comparison with the RPE record.
Explanation: Recoup was unable to calculate a general file User response: Determine the reason for the directory
address within the Phase 2 result area. In addition, the ordinal mismatch.
number or record ID was not valid.
System action: A message is sent to the operator to resume
or to abort.
User response: Do the following:
System action: A message is sent to the operator to resume User response: If this record type times out a second time,
or to abort. the group is marked as complete and processing begins for the
next record type. Phase 2 counts are suspect and should be
User response: Do the following: treated as incomplete.
1. Mount the correct RPE tape.
Your system programmer should review the dump to
2. Resume Phase 3 or abort recoup. determine whether the problem is in excessively long chains
or too low a time setting in the group macro.
041109
Program: Displayed on the console and in the dump. 04110C
Error Message: RECP – BAD DIRECTORY RECORD Program: Displayed on the console and in the dump.
Explanation: The captured directory and the RPE directory Error Message: SEQUENCE ERRORS ON DIRECTORY
for an ordinal do not match in one of the following areas: ORDINALS: ordnum
System action: A message is sent to the operator to resume Explanation: While sequence checking the directory ordinals
or to abort. during directory capture, the ordinals were found to be out of
sequence.
User response: Do the following:
1. See your system programmer to review the dump to System action: Processing is deferred while waiting for a
determine the cause of the error and to correct it. Be sure retry or an abort input message.
to determine which directory is error: User response: Do the following:
v The directory on the RPE tape (Phase 2) 1. See your system programmer to review the dump to
v The Phase 1 or Phase 3 captured directory. determine the cause of the error and to correct it.
2. Resume the recoup or abort it. 2. Enter a retry message or abort the run until the problem is
corrected.
04110A
04110D
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: RECP INCORRECT NUMBER OF
DIRECTORY RECORDS ON RPE. Error Message: DIRECTORY AVAILABLE IN ERROR: ordnum
218 TPF Messages (System Error, Offline, and Program Status Word)
04110E • 041118
that is not being processed will affect the Phase 2 and Phase 3
04110E
roll in. If so, then recoup should be aborted and run again
Program: Displayed on the console and in the dump. once the error is corrected.
INDEX macro of the descriptor record regarding the number System action: The chain-chase of this descriptor is started
of items within the record that requires processing. again.
System action: Processing is continued. User response: Allow to run from the beginning of the
chain-chase.
User response: Your system programmer should review the
dump to correct the index. Your system programmer should review the dump to
determine which descriptor ordinal and group displacement
were being restarted and why a match could not be found.
041119
Program: Displayed on the console and in the dump. 04111D
Error Message: None. Program: Displayed on the console and in the dump.
Explanation: The length of the ordinal number in the INDEX Error Message: None.
macro is not valid.
Explanation: An error occurred because the system was
System action: Processing is continued. unable to retrieve the message container record.
User response: Your system programmer should review the System action: This ECB is exited.
dump to correct the index.
User response: The operator should IPL the TPF system
again and start recoup again, as required.
04111A
Your system programmer should review the dump to
Program: Displayed on the console and in the dump. determine why a message container record cannot be
Error Message: None. retrieved.
2. Issue a SEL ID MMCCHHRR at the end of Phase 1. User response: Do the following:
3. Verify the phase 2 counts for this record type. 1. See your system programmer to review the dump to
determine the cause of the error and to correct it.
1. See your system programmer to review the dump to User response: Do the following:
correct and selectively chain-chase the record at the end of 1. See your system programmer to review the dump to
Phase 2. determine the cause of the error and to correct it.
2. Verify that the Phase 2 counts for this record type are 2. Start recoup again.
processed.
041120
04111C
Program: BRV0
Program: Displayed on the console and in the dump.
Error Message: ERROR DURING PSEUDO DIRECTORY
Error Message: None. INITIALIZATION
Explanation: An error occurred because on restart the Explanation: During recoup processing, an error occurred
retrieved descriptor did not contain a matching group while initializing the recoup pseudo directory records.
displacement to that which was saved in the 06RCPK
(working keypoint). System action: The ECB exits.
220 TPF Messages (System Error, Offline, and Program Status Word)
041122 • 041202
User response: Do the following: 1. Enter the ZRECP ABORT command to end recoup
1. Enter the ZRECP ABORT command to end recoup processing.
processing. 2. Determine why recoup was unable to flush recoup
2. Determine the cause of the error. pseudo directory records from VFA in the allowed time.
If the directory capture timeout value was not large
3. Correct the error. enough, consider entering the ZRECP PROFILE
4. Start recoup processing again. command specifying the DIRTIM parameter to increase
the timeout value.
Program: BCC2
041201
Error Message: POSSIBLE DESCRIPTOR OR DATA RECORD
CORRUPTION Program: BCC5
Explanation: The ZRECP RECALL command was entered, Error Message: None.
but an error occurred while trying to find a record during Explanation: Chain chase processing of a TPFDF data
chain chase processing. structure from a TPF recoup descriptor could not occur
System action: Recoup processing fails for this record, but because the database definition table (DBTAB) being chain
continues chain chasing the next record. chased could be not located within the DBTAB.
041208
041205
Program: B1A0
Program: BLOD
Error Message: None.
Error Message: None.
Explanation: During recoup processing, a nonrecord ID check
Explanation: A ZRECP ONEL command was entered which error condition was detected while trying to file the #IBMMS
called segment BLOD with incorrect parameters. record (ordinal #RCPGLB) or the #IBMM4 record (ordinal
System action: The ZRECP ONEL command fails. #RCPSYNC).
222 TPF Messages (System Error, Offline, and Program Status Word)
04120A • 04120F
1. Determine the cause of the error. but the BGAQ segment was unable to initialize the TPFDF
2. Correct the error. recoup statistics record (#SRM41A8). This could be caused by
an error with a DBDEF macro statement for the SRM41A file
3. IPL the affected processor. or with the TPFDF product.
4. Enter the ZRECP ABORT command to end recoup
processing if recoup was running. System action: Recoup processing ends without completing.
5. Enter the ZRECP ABORT command to end pool directory User response: Determine why SRM41A database
update (PDU) processing if PDU was running. initialization failed.
6. Cycle down the affected processor to 1052 state and then See TPF Operations for more information about the ZRECP
cycle up the processor. RECALL command. See the TPFDF library for more
information about the TPFDF product and the #SRM41A8
recoup statistics record.
04120A
Program: B1A4
04120D
Error Message: None.
Program: BKB0
Explanation: During recoup processing, an error condition
was detected by a FACE-type call while trying to retrieve the Error Message: RECOUP STATS COPY ERROR
#IBMMS record (ordinal #RCPGLB) or the #IBMM4 record Explanation: During phase 1 of recoup, an attempt to access
(ordinal #RCPSYNC). and update the recoup statistics record failed.
System action: The ECB exits. System action: The recoup statistics record is not updated
User response: Do the following: and recoup processing continues.
6. Cycle down the affected processor to 1052 state and then Error Message: None.
cycle up the processor.
Explanation: The ZRECP STOP command was entered
specifying the PROC parameter, but the record that was being
04120B chain chased on the specified processor cannot be restarted on
another processor in the subsystem user (SSU) in which it was
Program: B1A4 being processed.
Error Message: None. System action: Recoup processing continues, but the record
Explanation: During recoup or pool directory update (PDU) will be chain chased in the first SSU.
processing, an error condition was detected while trying to User response: Do the following:
find the #IBMMS record (ordinal #RCPGLB) or the #IBMM4
record (ordinal #RCPSYNC). 1. Check the console logs to determine which record ID was
in error.
System action: The ECB exits. 2. Determine the cause of the error.
User response: Do the following: 3. Correct the error.
1. Determine the cause of the error. 4. Enter the ZRECP ABORT command to end recoup
2. Correct the error. processing.
3. IPL the affected processor. 5. Start recoup processing again.
4. Enter the ZRECP ABORT command to end recoup
processing, if recoup was running. 04120F
5. Enter the ZRECP ABORT command to end PDU Program: B0P5
processing, if PDU was running.
6. Cycle down the affected processor to 1052 state and then Error Message: None.
cycle up the processor. Explanation: The ZRECP EXIT command was entered with
the PROC parameter specified, but the SRM51A8 statistics
04120C record was not copied to the TPFDF recoup statistics record
(#SRM41A8) because an error condition was detected by a
Program: BRIE FACE-type call or while trying to find or file one of the files.
Error Message: None. System action: Recoup processing continues. The ID counts
for the TPFDF files will be larger because the counts from the
Explanation: The ZRECP RECALL command was entered,
exited processor will not be deleted.
User response: When chain chase processing has ends, enter 1. Determine the cause of the error.
the ZRECP DISPLAY command specifying the PROC 2. Correct the error.
parameter for the exited processor to obtain all of the TPFDF
3. Enter the ZPOOL INIT command again.
file counts and subtract them from the total at the end of
recoup phase 2 processing to get an accurate representation of
the record ID counts. See TPF Operations for more information about the ZPOOL
INIT command. See TPF System Macros and TPF Application
See TPF Operations for more information about the ZRECP Programming for more information about the FACE program
EXIT and ZRECP DISPLAY commands. See the TPFDF library and the FACE interface.
for more information about the TPFDF product and the
#SRM41A8 recoup statistics record.
041213
Error Message: RECOUP DIR INTEGRITY CHECKS FAILED Explanation: The ZRECP SEL command was entered with a
record ID and file address specified, but TPF recoup
Explanation: During recoup phase 2 processing, or after the processing failed while accessing the online error log
ZRECP RESTART command was entered, the in-use counts in (SRHH1P) file.
the recoup pseudo directories or in the recoup RCI directories
(#SONCP, #SONSV, #SONROLL, or #SONUP) do not match System action: Selective recoup processing ends.
the actual chain chase counts that are recorded internally by
User response: Do the following:
recoup. The cause is most likely because of the re-initialization
of VFA (destroying the VFA-resident pseudo directories), a 1. Determine the cause of the problem.
hard IPL with storage cleared, or the corruption of VFA. 2. Correct the problem.
PSDR0 - count of bits=0 in pseudo dirs 3. Enter the ZRECP SEL command again.
PSDR1 - count of bits=1 in pseudo dirs
SONRCI0 - count of bits turned off by recoup
See TPF Operations for more information about the ZRECP SEL
SONRCI1 - count of bits left on by recoup
command.
System action: Recoup processing ends without completing.
User response: Determine why the recoup pseudo directories 041214
did not match. Most likely, a hard IPL or some other clearing
of VFA occurred. Because recoup keeps critical information in Program: BKA1
VFA, start recoup processing again. Error Message: TPFDF ERROR ON RECORD SRCK1P
224 TPF Messages (System Error, Offline, and Program Status Word)
041216 • 04121D
System action: The TPF system fails to reset the FC33 record.
041216
User response: Do the following:
Program: BCPY
1. Determine the cause of the error.
Error Message: BCPY - FILE ERROR - DIR COPY ABORTED
2. Correct the error.
Explanation: During recoup processing, an error condition 3. Enter ZRREC RESET.
was detected while trying to file pseudo directories.
System action: Directory copy ends without completing. See TPF Database Reference for more information about the
ZRREC RESET command.
User response: Do the following:
1. Determine the cause of the error.
04121B
2. Correct the error.
Program: BLOG
System action: Directory copy ends without completing. System action: The TPF system fails to reset the 1052-state
FC33 record.
User response: Do the following:
User response: Do the following:
1. Determine the cause of the error.
1. Determine the cause of the error.
2. Correct the error.
2. Correct the error.
3. Start recoup processing again.
3. Enter ZRREC RESET.
See TPF Database Reference for more information about recoup
functions and procedures. See TPF Database Reference for more information about the
ZRREC RESET command.
041218
04121C
Program: BCPY
Program: BRCQ
Error Message: BCPY - INVALID OPTION - DIR COPY
ABORTED Error Message: FACS OR FIND ERROR ON 1052 STATE
FC33 RECORD
Explanation: Program BCPY detected a FACE error.
Explanation: During recoup processing, a FACS- or
System action: Directory copy ends without completing. FIND-type error occurred while trying to access an FC33
record.
User response: Do the following:
1. Determine the cause of the error. System action: Recoup processing ends without completing.
2. Correct the error. User response: Do the following:
1. Determine the cause of the error.
041219 2. Correct the error.
Error Message: BCPY - TIMEOUT ERROR - DIR COPY See TPF Database Reference for more information about recoup
ABORTED functions and procedures.
Explanation: Directory capture exceeded the timeout value.
System action: Directory copy ends without completing. 04121D
User response: Determine the reason for the timeout. Program: BRV6
Error Message: None.
04121A Explanation: During recoup verify processing, a FIND-type
Program: BLOG error occurred while trying to access an SRM41A8 record.
Error Message: FACE ERROR ON FC33 RECORD System action: The ECB exits.
Explanation: During a TPF system cycle up or cycle down, or User response: Do the following:
while processing the ZRREC RESET command, a FACE-type 1. Determine the cause of the error.
error occurred while trying to access a FC33 record. 2. Correct the error.
See TPF Database Reference for more information about recoup Program: BS0C
functions and procedures.
Error Message: UNABLE TO MARK ID AS COMPLETED,
RECOUP IS PAUSED
04121E
Explanation: During recoup processing, an error occurred
Program: BRV6 because the recoup scheduling control table (IRSCT) could not
be updated to mark a record ID as completed.
Error Message: None.
System action: Recoup processing is paused.
Explanation: During recoup verify processing, a FACE-type
error occurred while trying to access an SRM41A8 record. User response: Do the following:
1. Determine the cause of the error.
System action: The ECB exits.
2. Correct the error.
User response: Do the following:
3. Do one of the following:
1. Determine the cause of the error.
a. Enter the ZRECP LEVEL command to continue with
2. Correct the error. recoup processing.
3. Start recoup processing again. b. Enter the ZRECP ABORT command to end recoup
processing.
See TPF Database Reference for more information about recoup 4. If the problem continues, see your IBM service
functions and procedures. representative.
041220 See TPF Operations for more information about the ZRECP
ABORT and ZRECP LEVEL commands.
Program: BS0C
Error Message: DESCRIPTOR NOT FOUND, POSSIBLE 041223
ERROR IN MPRECP TABLE
Program: BS0C
Explanation: During recoup processing, an internal error
occurred because a record ID could not be found in the recoup Error Message: UNABLE TO MARK DATA STORE
scheduling control table (IRSCT). COMPLETED, RECOUP IS PAUSED
System action: Recoup processing continues with the next Explanation: During recoup processing, an error occurred
record. because the recoup scheduling control table (IRSCT) could not
be updated to mark a TPF collection support (TPFCS) data
User response: See your IBM service representative. store as completed.
System action: Recoup processing fails for this record, but See TPF Operations for more information about the ZRECP
continues chain chasing the next record. ABORT and ZRECP LEVEL commands.
User response: Do the following:
1. Record the record ID with the error. 041224
2. Complete recoup processing for the remaining records. Program: BS0C
3. Determine the cause of the error.
Error Message: ERROR ON MPRECP TBL, ITEM NOT
4. Correct the error. FOUND, RECOUP ABORTED
5. Start selective recoup processing on the record ID that
Explanation: During recoup processing, an internal error
failed.
occurred because the BS0C segment could not find an item in
the recoup scheduling control table (IRSCT).
226 TPF Messages (System Error, Offline, and Program Status Word)
041225 • 041262
v An attempt was made to restore data that was not saved by 3. Start recoup processing again.
the preceding BSAVE macro.
See TPF Database Reference for more information about recoup
System action: The entry control block (ECB) exits.
functions and procedures.
User response: Do the following:
1. Review the system error dump to determine the cause of 0412F3
the error.
2. Correct the error. Program: BJ01
See TPF Database Reference for more information about recoup 0412F5
functions and procedures.
Program: BJ04
228 TPF Messages (System Error, Offline, and Program Status Word)
0412F6 • 041500
but the TPF system determined that the specified slot does not In addition, your system programmer should consider
reside on the in-use chain for the specified restart area. The reviewing the recoup working keypoint to determine which
IRART is corrupted. processor should be active.
Explanation: An error occurred because the system v WARNING — CORE COPY OF Bxx2 ID INVALID — NO
interprocessor communications (SIPC) ordinals do not match. KPT UPDT
An item to be SIPC to another process does not have an Explanation: An ID that is not valid was found in the in-core
ordinal number in the PIDT table. copy of the capture and restore utility keypoint (BXAX) or the
System action: This ECB is ended. disk device control table (Bxx2). This condition is detected
when a request to update the keypoint record to file is being
User response: Do the following: serviced and is indicative of questionable main storage
1. See your system programmer to review the dump to conditions.
determine the cause of the error and to correct it. When this error is found with no attached message, it is
2. Enter the message again. usually followed by other messages from the capture and
restore utility.
Program: Displayed on the console and in the dump. User response: Do the following:
Program: Displayed on the console and in the dump. Error Message: The ZRBKD command was entered, but an
error occurred while accessing the BKD control record
Error Message: INSUFFICIENT HEAP SPACE FOR EXTENT (#BKDCTL).
TABLE
System action: The command fails.
Explanation: While trying to build the do not restore extent
table for the module being restored, the Restore function was User response: Do the following:
unable to allocate enough heap storage to hold the table. 1. Determine the cause of the error.
2. Correct the error.
System action: A dump is issued and the ECB is exited.
3. Enter the ZRBKD command again.
User response: Determine why there was not enough heap
storage available. This is usually due to a software error or too
See TPF Operations for more information about the ZRBKD
many non-restorable extents being defined.
command.
041503
042002
Program: Displayed on the console and in the dump.
Program: BRUB
Error Message: RTCUC EXTENTS RETURNED AN ERROR
Error Message: The ZRBKD command was entered, but an
OR INVALID DATA
error occurred while accessing the master copy of the recoup
Explanation: While trying to build the non-restorable extent keypoint (#BKMST).
table for the module being restored, the restore function
System action: The command fails.
received an error return on the RTCUC EXTENTS macro or
data in the returned extent table that is not valid. User response: Do the following:
System action: A dump is issued and the ECB is exited. 1. Determine the cause of the error.
2. Correct the error.
User response: Determine why there was an error returned
from the RTCUC macro or why the data was not valid. This 3. Enter the ZRBKD command again.
error may be caused by a logic error in the processing of the
returned extent information. See TPF Operations for more information about the ZRBKD
command.
041504
042555
Program: Displayed on the console and in the dump.
Program: OLD6
Error Message: EVENT ERROR DURING CAPTURE
RESTART Error Message: ERROR ON RETURN FROM FSTIC
Explanation: An error occurred during file capture restart Explanation: This error was issued by OLD6 on an error
while processing an EVNTC macro or an EVNWC macro for returned from the FSTIC macro.
one of the following reasons:
System action: The program outputs the ERROR ON
v The time-out value of 1 minute was exceeded RETURN FROM FSTIC message.
v A duplicate event name was found
v The EVNWC macro found an unrecognized event name.
044000–044FFF
With this error, there is the possibility that more modules may
be started than allowed by the channel and control unit
utilization parameters.
230 TPF Messages (System Error, Offline, and Program Status Word)
044100 • 094000
User response: None. System action: The entry control block (ECB) exits.
User response: Have your system programmer review the
044500 system error dump to determine the cause of the error and to
correct it.
Program: DYDU
Error Message: UPDATE ABORTED 064500
Explanation: A find- or file-type error occurred on a pool Program: CTAL
rollin directory (#SONRI) or PDU pseudo directory (#SONUP)
Error Message: INCORRECT PARAMETER FOR
record while attempting to roll in a pool directory update
TPF_PNAMC FUNCTION
(PDU). This message is accompanied by message DYDU0099E.
Explanation: An input parameter or a combination of input
System action: Pool directory update (PDU) processing ends
parameters in the tpf_pnamc function call are incorrect.
without completing.
System action: The entry control block (ECB) exits.
User response: Do the following:
1. Determine the cause of the problem. User response: Correct the tpf_pnamc input parameters.
2. Correct the problem. See TPF C/C++ Language Support User's Guide for more
information about the tpf_pnamc function.
3. Start PDU processing again.
044502 094000–094FFF
Program: BOF7
094000
Error Message: FIND OR FILE ERROR ON FC33 RECORD
Program: CCISOC (CIS0)
Explanation: A find- or file-type error occurred on a X'FC33'
record during recoup or pool directory update (PDU) Error Message: INVALID ISO-C SHARED LIBRARY CALL
processing.
094002 094005
Error Message: ERROR READING PROGRAM VERSION Error Message: SHARED LIBRARY ORDINAL CONFLICT
RECORD
Appended Message: SHARED LIBRARY ORDINAL
Explanation: A $FINDC attempt on a program version record CONFLICT
(PVR) did not complete successfully.
Explanation: An attempt was made to load a shared library,
System action: Processing continues; however, state change is but a library with the same ordinal was already loaded. This
disabled. The program allocation table (PAT) information system error dump contains the ordinal number, the name of
(version code, linkage type, and size) for some programs is the library that is loaded, and the name of the library that
not up to date, which might cause problems when these could not be loaded.
programs are run.
System action: A RELPC is done to release the library that
User response: Do the following: could not be loaded.
1. Use the SUD value given from the system error dump to User response: Assign a unique ordinal number to the
determine the cause of the problem. library.
2. Correct the problem.
3. IPL the TPF system again. 094006
Program: CCEG
094003
Error Message: ENTER TO ISO-C TRANSFER VECTOR IS
Program: CRL0, CRL1 NOT ALLOWED — ECB EXITED
Error Message: ERROR RELEASING ISO-C FILE RESIDENT Explanation: An ECB attempted to enter a transfer vector
PROGRAM STORAGE. POLICING WILL CONTINUE. program, but the base program is defined to be an ISO-C
Appended Message: ERROR RELEASING ISO-C FILE dynamic load module (DLM). Transfer vectors are not
RESIDENT PROGRAM STORAGE. POLICING WILL supported for ISO-C DLMs.
CONTINUE. System action: The ECB exits.
Explanation: An error occurred when the TPF system tried to User response: Check the program making the call to the
release a program from the ISO-C file resident program area. transfer vector. Update the program to call the DLM entry
System action: The program causing the error is removed point function instead of the transfer vector.
from the file resident program chain and the address of the See the TPF Migration Guide: Program Update Tapes for more
program is set to 0. information about migrating C programs that contain transfer
User response: Analyze the system dump to determine the vectors.
cause of the error. See your IBM service representative to
report the problem.
232 TPF Messages (System Error, Offline, and Program Status Word)
094007 • 09400C
094007 09400A
Program: CCENBK(CCEB) Program: CCENBK(CCEF)
Error Message: DIRECT ENTER TO LIBRARY LOAD Error Message: UNABLE TO OBTAIN CORE AREA FOR
MODULE NOT ALLOWED — ECB EXITED LOAD MODULE
Appended Message: DIRECT ENTER TO LIBRARY LOAD Appended Message: UNABLE TO OBTAIN CORE AREA
MODULE NOT ALLOWED — ECB EXITED FOR LOAD MODULE
Explanation: An attempt was made to do a direct enter to a Explanation: There is not enough space in the system heap
library. Only function calls for the functions contained in a storage to hold the ISO-C program or library that the system
library are valid. It is not valid to attempt to enter the library is attempting to fetch from DASD to main storage.
load module directly.
System action: The ECB exits.
System action: The ECB is exited.
User response: Do the following:
User response: Correct the program that entered the library 1. Determine if the program is defined as file or core resident.
load module directly; use a function call for a function in the
v If the program is defined as core resident, increase the
library.
size of the core resident program area (CRPA) by
entering the ZCTKA command.
094008 v If the program is defined as file resident, increase the
Program: CCFADC (CEFI) size of the system heap storage by entering the ZCTKA
command.
Error Message: INVALID DECB 2. IPL the TPF system again.
Appended Message: INVALID DECB
Explanation: For CP DASD I/O, there are two conditions 09400B
when this error can occur during: Program: CCENBK(CCEF, CCEG)
v Processing to initialize the MIOB off the stack; the data
event control block (DECB) is not inactive Error Message: NUMBER OF I/O REQUESTS
OUTSTANDING IS INVALID
v Interrupt processing; the DECB is not marked I/O active.
Appended Message: NUMBER OF I/O REQUESTS
In addition, the DECB address itself may be valid, but the OUTSTANDING IS INVALID
DECB contents may not be. Explanation: A $FINDC I/O request has completed. The
System action: The TPF system is re-IPLed. number of I/O requests outstanding is not decremented
because the value is not valid, that is, it is not a positive
User response: See your IBM service representative for more number.
information about the DECB.
System action: A catastrophic system error is taken.
Explanation: During load module fetch processing, an Appended Message: ISO-C STACK OVERFLOW
attempt to translate an ordinal number in the load module to Explanation: The size of the ISO-C stack that is required
a file address was unsuccessful. exceeds the maximum allowed for the ECB.
System action: The ECB exits. System action: The ECB exits.
User response: Do the following: User response: Do the following:
1. Determine the cause of the ordinal number corruption. 1. Make sure that the application is not in an infinite
2. Reload all of the ISO-C load modules in the system and recursive call loop.
include the LOADER PROG-MOD-BASE CLEAR card in 2. Verify that the values set in CTKA for ESPS and MSHS are
the load deck to ensure that all ordinal numbers in use are large enough to accommodate your application. Note that
correct. the maximum size of the stack is set to the smaller of these
2 values.
3. If the application actually requires larger stack storage,
increase the allowed stack size for the ECB or for the
system.
See the TPF C/C++ Language Support User's Guide for 1. Based on the cause of the problem, take one of the
additional information. following actions:
v Determine the cause of the ordinal number corruption
and correct the problem.
09400D
v Allocate more records in the #PVR record type, if
Program: CCSTOR(CLHV) needed, or allocate records in the #PVR record type if
Error Message: ISO-C STATIC STORAGE OVERFLOW there are none.
2. IPL the TPF system again after the problem has been
Appended Message: ISO-C STATIC STORAGE OVERFLOW corrected.
Explanation: The storage requested for static data exceeds the
maximum allowed for the ECB.
094010
System action: The ECB exits.
Program: CCENBK(CCED)
User response: Do the following:
Error Message: CURRENT VERSION OF ISO-C LIBRARY
1. Static storage is allocated from the TPF heap. Make sure (CISO) NOT LOADED
the application is not in an infinite loop acquiring heap
storage. Appended Message: CURRENT VERSION OF ISO-C
LIBRARY (CISO) NOT LOADED
2. If the application actually requires larger heap storage,
increase the maximum allowed heap size for the ECB or Explanation: The TPF system detected that either the ISO-C
for the system. See the TPF C/C++ Language Support User's library is not loaded or the current version is not loaded.
Guide for more information about how to increase the heap
size. System action: The register contents are displayed and the
ECB is exited.
User response: See your IBM service representative to report System action: Policing of ISO-C file resident programs is
the problem. stopped but the TPF system continues to operate.
User response: IPL the TPF system again to restart file
09400F resident program policing and rebuild the program chain.
Program: CCENBK(CCEG) Analyze the system dump to determine the cause of the error.
See your IBM service representative to report the problem.
Error Message: ERROR TRANSLATING PROGRAM
VERSION RECORD ORDINAL NUMBER TO A FILE
ADDRESS 094015
234 TPF Messages (System Error, Offline, and Program Status Word)
094016 • 094018
See TPF Application Programming for more information about CIRCULAR DLL LOAD, RUN DESTRUCTORS
DLL support.
Explanation: A circular DLL load error occurred, which
means DLL A needs DLL B and DLL B needs DLL while
094016 running constructors.
Program: Dynamic link library (DLL) load functions in CISO. System action: The ECB exits.
Error Message: ATTEMPT TO LOAD NON-DLL dll AS A User response: Design the DLLs to eliminate a circular DLL
DLL load condition.
System action: The entry control block (ECB) exits. User response: Provide more heap storage.
User response: Do one of the following: Appended Message: IMPLICIT DLL LOAD NOT DONE,
NOT ENOUGH STORAGE FOR DLCB
v If the module is meant to be a DLL, build the load module
as a DLL. Explanation: The malloc C function was not successful when
v If the module is not meant to be a DLL, do not use DLL trying to get storage for a DLCB.
linkage to reference functions or variables in the module.
See TPF Application Programming for more information about Note: DLCB is an IBM internal-use-only control block.
DLL support. System action: The ECB exits.
User response: Provide more heap storage.
094017
Appended Message: DLL dll DOES NOT EXPORT ANY
Program: TPF_dll_load function in CISO. VARIABLES AND FUNCTIONS
Error Message: UNABLE TO LOAD THE DLL dll, GETPC Where:
RETURN CODE = d, – ECB EXITED
dll The 4-character name of the DLL.
Where:
Explanation: The DLL application referenced an exported
dll The 4-character name of the dynamic link library (DLL). variable or called an exported function from the target DLL.
d The return code from the GETPC macro. However, the DLL in use does not export any variables and
functions.
Explanation: An error occurred with the getpc C function
while trying to load a DLL. System action: The ECB exits.
System action: The entry control block (ECB) exits. User response: Do the following:
1. Build the DLL to export required functions and variables
User response: Do the following: and load the DLL to the system again.
1. See the TPF C/C++ Language Support User's Guide for more 2. Run the program again.
information about the return code from the getpc C
function. Appended Message: DLL dll DOES NOT EXPORT ANY
2. Correct the problem. VARIABLES, BUT APPLICATION IS EXPECTING
Where:
094018 dll The 4-character name of the DLL.
Program: Implicit dynamic link library (DLL) load function Explanation: The DLL application referenced an exported
in CISO. variable from the target DLL; however, the DLL in use does
not export any variables.
Error Message: ERROR DURING DLL IMPLICIT LOAD
System action: The ECB exits.
Appended Message: IMPLICIT DLL LOAD NOT DONE,
CIRCULAR DLL LOAD, RUN CONSTRUCTORS User response: Do the following:
Explanation: A circular DLL load error occurred, which 1. Build the DLL to export required variables and load the
means DLL A needs DLL B and DLL B needs DLL while DLL to the system again.
running constructors. 2. Run the program again.
System action: The entry control block (ECB) exits. Appended Message: DLL dll DOES NOT EXPORT ANY
User response: Design the DLLs to eliminate a circular DLL FUNCTIONS, BUT APPLICATION IS EXPECTING
load condition. Where:
Appended Message: IMPLICIT DLL LOAD NOT DONE, dll The 4-character name of the DLL.
Explanation: The DLL application called an exported System action: The entry control block (ECB) exits.
function from the target DLL; however, the DLL in use does
User response: Correct the heap storage error in the
not call any function.
application and free the DLL from storage.
System action: The ECB exits.
Reference:
User response: Do the following: v See TPF General Macros for information about the RELPC
1. Build the DLL to export required functions and load the macro.
DLL to the system again. v See the TPF C/C++ Language Support User's Guide for
2. Run the program again. information about the relpc function.
236 TPF Messages (System Error, Offline, and Program Status Word)
094203 • 097451
094203 097400
Error Message: EXCEPTION IS CAUGHT ACROSS Error Message: UNEXPECTED API CALL TO function,
TARGET(TPF) PROGRAM PLEASE CONTACT IBM
094204 097401
Error Message: AN UNCAUGHT EXCEPTION OR A BAD Error Message: A CALL HAS BEEN MADE TO function
RE-THROW IS DETECTED, EXCEPTION HANDLING IS
Where:
TERMINATED
function
Explanation: One of the following occurred:
The name of the function that was called.
v An exception was thrown without a corresponding catch
clause to catch the exception. Explanation: A call was made to a system service from the
TPF debug server, but was not expected.
v An exception was thrown again without an existing
exception. System action: The entry control block (ECB) continues.
System action: The entry control block (ECB) exits. User response: See your IBM service representative, and
provide the name of the function that was called.
User response: Do the following:
1. Examine the system error and application programs to
determine where the incorrect re-throw or the uncaught 097450
exception was thrown.
Program: CPA0
2. Correct the application.
Error Message: AN ERROR OCCURRED WHILE CALLING
See TPF Application Programming for more information about FUNCTION function, RETURN CODE code
C++ exception handling. Where:
function
094320 The name of the C/C++ function that was called.
Program: CCENBK (CCEG) code
The return code from the C/C++ function.
Error Message: ERROR READING MASTER APRG RECORD
Explanation: A call to a system service was made, but an
Explanation: A $FINDC macro attempt on the master APRG
unexpected return code was received.
record was not completed successfully.
System action: The entry control block (ECB) continues.
System action: Processing continues; however, ADATA file
information will not be moved from the program version User response: See your IBM service representative, and
record (PVR) entries to the program allocation table (PAT) provide the name of the C/C++ function that was called.
entries. As a result, the TPF debugger will not be able to use
ADATA files that were loaded to the program base.
097451
User response: Do the following:
Program: CPA0
1. Use the CE1SUD indicator in the entry control block (ECB)
value that was provided in the system error dump to Error Message: AN ERROR OCCURRED WHILE CALLING
determine the cause of the problem. FUNCTION function
2. Correct the problem.
Where:
3. IPL the TPF system again.
function
The name of the C/C++ function that was called.
097000–097FFF Explanation: An unexpected call to a C/C++ function
occurred.
System action: The entry control block (ECB) continues. record ID for a second-level index record. The record is
replaced with a new file address and filed back to the
User response: See your IBM service representative, and database after the system error dump. The following areas are
provide the name of the C/C++ function that was called. dumped:
v LEVEL1, which contains the first 30 bytes of the first-level
097452 index record that points to the second-level index record in
error
Program: CPA0
v FARW_L1, which contains the file address reference word
Error Message: PERFORMANCE ANALYZER FAILED (FARW) for the first-level index record
CALLING FILE SYSTEM API v LVL1ENTY, which contains the contents of the first-level
Explanation: The TPF Performance Execution Trace Analyzer index record entry
tried to call a file system application programming interface v LEVEL2, which contains the first 30 bytes of the record in
(API), but an error occurred. error
System action: The entry control block (ECB) continues. v FARW_L2, which contains the contents of the FARW for the
record in error.
User response: Do the following:
Error Message: IO ERROR ON LEVEL 2 INDEX RECORD,
1. Determine why this file system function failed.
RECORD REPLACED
2. Be sure that the file system is enabled.
Explanation: An I/O error was detected when attempting to
3. Enter ZFILE chmod 777 / to give write access to the root
read the second-level index record. The record is replaced with
directory.
a new file address and filed back to the database after the
system error dump. The following areas are dumped:
See TPF Operations for more information about the ZFILE and
v LEVEL1, which contains the first 30 bytes of the first-level
ZFINT commands.
index record that points to the second-level index record in
error
097455 v FARW_L1, which contains the file address reference word
(FARW) for the first-level index record
Program: CPA0
v LVL1ENTY, which contains the contents of the first-level
Error Message: PERFORMANCE ANALYZER EVENT index record entry
ARRAY OVERFLOW DETECTED
v FARW_L2, which contains the contents of the FARW for the
Explanation: A performance analyzer internal array used to record in error
store trace events has overflowed. v CE1SUD6, which contains the contents of the system error
System action: The entry control block (ECB) exits. byte for the data level in error.
User response: Contact your IBM service representative. Error Message: INCORRECT RECORD ID IN TARGET OF
LEVEL2 INDEX ENTRY, ENTRY CLEARED
Explanation: The returned record does not contain a valid
098000–098FFF record ID for either a profile or a contention record. The
second-level index entry is cleared and the record is filed back
to the database after the system error dump. The following
098100
areas are dumped:
Program: Displayed on the console and in the dump. v LEVEL2, which contains the first 30 bytes of the
Error Message: IO ERROR ON FIND OF LEVEL1 INDEX second-level index record that points to the record in error
RECORD v FARW_L2, which contains the file address reference word
(FARW) for the second-level index record
Explanation: An I/O error was detected when attempting to
read the first-level index record. An I/O error code is returned v LVL2ENTY, which contains the contents of the second-level
to the caller. index record entry
v RECORD, which contains the first 30 bytes of the returned
Error Message: INCORRECT RECORD ID IN LEVEL1
record
INDEX RECORD, RECORD RESET
v FARW_REC, which contains the contents of the FARW for
Explanation: The returned record does not contain a valid the record in error.
record ID for a first-level index record. The record is zeroed
and filed back to the database after the system error dump. Error Message: IO ERROR READING TARGET OF LEVEL2
The following areas are dumped: INDEX ENTRY, ENTRY CLEARED
v LEVEL1, which contains the first 48 bytes of the record in Explanation: An I/O error was detected when attempting to
error read either a profile or a contention record. The second-level
v FARW_L1, which contains the file address reference word index entry is cleared and the record is filed back to the
(FARW) for the record in error. database after the system error dump. The following areas are
dumped:
Error Message: INCORRECT RECORD ID IN LEVEL2
INDEX RECORD, RECORD REPLACED v LEVEL2, which contains the first 30 bytes of the
second-level index record that points to the record in error
Explanation: The returned record does not contain a valid
238 TPF Messages (System Error, Offline, and Program Status Word)
098100
v FARW_L2, which contains the file address reference word database after the system error dump. The following areas are
(FARW) for the second-level index record dumped:
v LVL2ENTY, which contains the contents of the second-level v CONTENT, which contains the first 30 bytes of the previous
index record entry contention record that points to the record in error
v FARW_REC, which contains the contents of the FARW for v FARW_CON, which contains the file address reference word
the record in error (FARW) for the previous contention record
v CE1SUD6, which contains the contents of the system error v FARW_REC, which contains the contents of the FARW for
byte for the data level in error. the record in error
Error Message: INCORRECT RECORD ID IN PROFILE v CE1SUD6, which contains the contents of the system error
CHAIN RECORD, CHAIN POINTER CLEARED byte for the data level in error.
Explanation: The returned record does not contain a valid Error Message: INCORRECT RECORD ID IN RECORD IN
record ID for a profile record. The chain pointer for the CONTENTION ENTRY, ENTRY CLEARED
previous profile record is cleared and the record is filed back Explanation: The returned record does not contain a valid
to the database after the system error dump. The following record ID for a profile record. The profile entry for the
areas are dumped: contention record is cleared and the contention record is filed
v PROFILE, which contains the first 30 bytes of the previous back to the database after the system error dump. The
profile record that points to the record in error following areas are dumped:
v FARW_PRF, which contains the file address reference word v CONTENT, which contains the first 30 bytes of the
(FARW) for the previous profile record contention record that points to the record in error
v RECORD, which contains the first 30 bytes of the returned v FARW_CON, which contains the file address reference word
record (FARW) for the contention record
v FARW_REC, which contains the contents of the FARW for v CONTENTY, which contains the contents of the contention
the record in error. record entry
Error Message: IO ERROR READING PROFILE CHAIN v RECORD, which contains the first 30 bytes of the returned
RECORD, CHAIN POINTER CLEARED record
v FARW_REC, which contains the contents of the FARW for
Explanation: An I/O error was detected when attempting to
the record in error.
read a profile record. The chain pointer for the previous
profile record is cleared and the record is filed back to the Error Message: IO ERROR READING RECORD IN
database after the system error dump. The following areas are CONTENTION ENTRY, ENTRY CLEARED
dumped:
Explanation: An I/O error was detected when attempting to
v PROFILE, which contains the first 30 bytes of the previous read a profile record. The profile entry for the contention
profile record that points to the record in error record is cleared and the contention record is filed back to the
v FARW_PRF, which contains the file address reference word database after the system error dump. The following areas are
(FARW) for the previous profile record dumped:
v FARW_REC, which contains the contents of the FARW for v CONTENT, which contains the first 30 bytes of the
the record in error contention record that points to the record in error
v CE1SUD6, which contains the contents of the system error v FARW_CON, which contains the file address reference word
byte for the data level in error. (FARW) for the contention record
Error Message: INCORRECT RECORD ID IN CONTENTION v CONTENTY, which contains the contents of the contention
CHAIN RECORD, CHAIN POINTER CLEARED record entry
v FARW_REC, which contains the contents of the FARW for
Explanation: The returned record does not contain a valid
the record in error
record ID for a contention record. The chain pointer for the
previous contention record is cleared and the record is filed v CE1SUD6, which contains the contents of the system error
back to the database after the system error dump. The byte for the data level in error.
following areas are dumped: System action: If the request was to find a specific user
v CONTENT, which contains the first 30 bytes of the previous profile record, the TPF Internet mail server profile handler
contention record that points to the record in error clears the pointer to the offending record and returns a not
v FARW_CON, which contains the file address reference word found condition to the caller. If the request was to add a new
(FARW) for the previous contention record user profile record, the new profile is added after the pointer
is cleared and the database is updated.
v RECORD, which contains the first 30 bytes of the returned
record User response: Do one of the following:
v FARW_REC, which contains the contents of the FARW for v See your IBM representative for more information.
the record in error. v Use the capture tapes to re-create the database or broken
Error Message: IO ERROR READING CONTENTION chains.
CHAIN RECORD, CHAIN POINTER CLEARED
See TPF Transmission Control Protocol/Internet Protocol for more
Explanation: An I/O error was detected when attempting to information about TPF Internet mail server support.
read a contention record. The chain pointer for the previous
contention record is cleared and the record is filed back to the
098101 098104
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: ERROR ON CALL TO FACS FOR MAIL Error Message: UPR MAILBOX ITEM OFLOW GET ERROR
INDEX
Explanation: While adding a mailbox to an existing account,
Explanation: An error was detected when the mail profile the request to get a file pool address and working storage
handler attempted to generate the file address of the first-level block for a user profile record (UPR) mailbox item overflow
index record by calling the FACS program. failed.
System action: A file address compute (FACE) error code is System action: A system error is issued and control returns
returned to the caller and processing continues. to the caller. The mailbox is not created.
User response: Do the following: User response: Do the following:
1. Review the system error dump to determine the cause of 1. Enter the ZRTDM DISPLAY command to display the
the error. record ID attribute table (RIAT) ID definition and
2. Correct the error. determine whether the RIAT ID is not defined or is
defined incorrectly.
See TPF Transmission Control Protocol/Internet Protocol for more 2. If the RIAT ID is not defined, define it. If the RIAT ID is
information about TPF Internet mail server support. defined incorrectly, correct the definition.
User response: Do the following: Explanation: An error occurred when the TPF Internet mail
server attempted to retrieve a user profile record (UPR)
1. Review the system error dump to determine the cause of
mailbox record.
the error. The system error byte for the data level in error
is in ECB field CE1SUD9 or CE1SUDA. System action: A system error is issued and control returns
2. Correct the error. to the caller.
User response: Do the following:
See TPF Transmission Control Protocol/Internet Protocol for more
1. Review the system error dump to determine the cause of
information about TPF Internet mail server support.
the error. The system error byte for the data level in error
is in ECB field CE1SUDB, CE1SUDC, or CE1SUDF.
098103 2. Correct the error.
Program: Displayed on the console and in the dump.
See TPF Transmission Control Protocol/Internet Protocol for more
Error Message: UPR MAILBOX ITEM OFLOW HARDWARE information about TPF Internet mail server support.
FIND ERROR
Explanation: A hardware error occurred when the TPF 098106
Internet mail server attempted to retrieve a user profile record
(UPR) mailbox item overflow block. The file address could not Program: Displayed on the console and in the dump.
be retrieved because of a DASD failure. Error Message: UPR MAILBOX RECORD HARDWARE
System action: A system error is issued and control returns FIND ERROR
to the caller. Explanation: A hardware error occurred when the TPF
User response: See your IBM representative to determine the Internet mail server attempted to retrieve a user profile record
cause of the error and correct the error. (UPR) mailbox record. The file address could not be retrieved
because of a DASD failure.
See TPF Transmission Control Protocol/Internet Protocol for more
information about TPF Internet mail server support. System action: A system error is issued and control returns
to the caller.
User response: See your IBM representative to determine the
cause of the error and correct the error.
240 TPF Messages (System Error, Offline, and Program Status Word)
098107 • 098120
098107 09810A
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: UPR MAILBOX RECORD GET ERROR Error Message: UPR ACL RECORD GET ERROR
Explanation: While adding a user profile record (UPR) Explanation: While adding a user profile record (UPR) access
mailbox record, the request to get a file pool address and control list (ACL) record, the request to get a file pool address
working storage block failed. and working storage block failed.
System action: A system error is issued and control returns System action: A system error is issued and control returns
to the caller. to the caller. The ACL record is not created.
See TPF Transmission Control Protocol/Internet Protocol for more See TPF Transmission Control Protocol/Internet Protocol for more
information about TPF Internet mail server support. See TPF information about TPF Internet mail server support. See TPF
Operations for more information about the ZRTDM DISPLAY Operations for more information about the ZRTDM DISPLAY
command. See TPF System Generation for more information command. See TPF System Generation for more information
about the RIAT. about the RIAT.
098108 09810B
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: UPR ACL RECORD FIND ERROR Error Message: UPR MAILBOX ITEM OFLOW FILE WAIT
ERROR
Explanation: An error occurred when the TPF Internet mail
server attempted to retrieve a user profile record (UPR) access Explanation: An error occurred when the TPF Internet mail
control list (ACL) record. server attempted to file a user profile record (UPR) mailbox
item overflow block.
System action: A system error is issued and control returns
to the caller. System action: A system error is issued and control returns
to the caller.
User response: Do the following:
1. Review the system error dump to determine the cause of User response: Do the following:
the error. The system error byte for the data level in error 1. Review the system error dump to determine the cause of
is in ECB field CE1SUD8 or CE1SUDE. the error.
2. Correct the error. 2. Correct the error.
See TPF Transmission Control Protocol/Internet Protocol for more See TPF Transmission Control Protocol/Internet Protocol for more
information about TPF Internet mail server support. information about TPF Internet mail server support.
098109 098120
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: UPR ACL RECORD HARDWARE FIND Error Message: ACTIVE QUEUE HARDWARE FIXED
ERROR ORDINAL FIND ERROR
Explanation: A hardware error occurred when the TPF Explanation: A hardware error occurred during an attempt to
Internet mail server attempted to retrieve a user profile record retrieve an active queue record.
(UPR) access control list (ACL) record. The file address could
not be retrieved because of a DASD failure. System action: Processing continues for other functions.
User response: See your IBM representative to determine the
System action: A system error is issued and control returns
to the caller. cause of the error and correct the error.
User response: See your IBM representative to determine the See TPF Transmission Control Protocol/Internet Protocol for more
cause of the error and correct the error. information about TPF Internet mail server support.
Explanation: A record ID or record code check (RCC) error Program: Displayed on the console and in the dump.
occurred during an attempt to retrieve an active queue record.
Error Message: ACTIVE QUEUE CONTROL RECORD
This error can occur if the active queue record is not
HARDWARE POOL FIND ERROR
initialized.
Explanation: A hardware error occurred during an attempt to
System action: Processing continues for other functions.
retrieve an active queue control record.
User response: Do one of the following:
System action: Processing continues for other functions.
v If the active queue record was not initialized, enter ZMAIL
FLUSH to initialize it. User response: See your IBM representative to determine the
cause of the error and correct the error.
v If the active queue record was initialized previously, do the
following: See TPF Transmission Control Protocol/Internet Protocol for more
1. Review the system error dump to determine the cause of information about TPF Internet mail server support.
the error. The system error byte for the data level in
error is in ECB field CE1SUD2 or CE1SUD3.
098125
2. Correct the error.
Program: Displayed on the console and in the dump.
See TPF Transmission Control Protocol/Internet Protocol for more Error Message: ACTIVE QUEUE CONTROL RECORD ID OR
information about TPF Internet mail server support. See TPF RCC POOL FIND ERROR
Operations for more information about the ZMAIL command.
Explanation: A record ID or record code check (RCC) error
occurred during an attempt to retrieve an active queue control
098122 record.
Program: Displayed on the console and in the dump. System action: Processing continues for other functions.
Error Message: DEFERRED QUEUE HARDWARE FIXED User response: Do the following:
ORDINAL FIND ERROR
1. Review the system error dump to determine the cause of
Explanation: A hardware error occurred during an attempt to the error. The system error byte for the data level in error
retrieve a deferred queue record. is in ECB field CE1SUD5 or CE1SUD6.
System action: Processing continues for other functions. 2. Correct the error.
User response: See your IBM representative to determine the See TPF Transmission Control Protocol/Internet Protocol for more
cause of the error and correct the error. information about TPF Internet mail server support.
See TPF Transmission Control Protocol/Internet Protocol for more
information about TPF Internet mail server support. 098126
Program: Displayed on the console and in the dump.
098123
Error Message: DEFERRED QUEUE CONTROL RECORD
Program: Displayed on the console and in the dump. HARDWARE POOL FIND ERROR
Error Message: DEFERRED QUEUE ID OR RCC FIXED Explanation: A hardware error occurred during an attempt to
ORDINAL FIND ERROR retrieve a deferred queue control record.
Explanation: A record ID or record code check (RCC) error System action: Processing continues for other functions.
occurred during an attempt to retrieve a deferred queue
record. This error can occur if the deferred queue record is not User response: See your IBM representative to determine the
initialized. cause of the error and correct the error.
System action: Processing continues for other functions. See TPF Transmission Control Protocol/Internet Protocol for more
information about TPF Internet mail server support.
User response: Do one of the following:
v If the deferred queue record was not initialized, enter
098127
ZMAIL FLUSH to initialize it.
v If the deferred queue record was initialized previously, do Program: Displayed on the console and in the dump.
the following:
Error Message: DEFERRED QUEUE CONTROL RECORD ID
1. Review the system error dump to determine the cause of OR RCC POOL FIND ERROR
the error. The system error byte for the data level in
error is in ECB field CE1SUD2 or CE1SUD3. Explanation: A record ID or record code check (RCC) error
occurred during an attempt to retrieve a deferred queue
2. Correct the error.
control record.
242 TPF Messages (System Error, Offline, and Program Status Word)
098128 • 09812D
System action: Processing continues for other functions. 2. Correct the error.
Program: Displayed on the console and in the dump. System action: The entry control block (ECB) exits.
Error Message: ERROR ALLOCATING SYSTEM HEAP User response: Do the following:
BLOCK 1. Review the system error dump to determine the cause of
the error.
Explanation: The TPF Internet mail server was unable to
allocate the system heap storage required to hold the 2. Correct the error.
configuration files.
See TPF Transmission Control Protocol/Internet Protocol for more
System action: The TPF Internet mail server stops. information about TPF Internet mail server support.
User response: Do the following:
1. Determine why there are not enough system heap frames 09812C
and correct the problem.
Program: Displayed on the console and in the dump.
2. Enter the ZCTKA ALTER command to change the amount
of memory allocated for system heap frames, if necessary. Error Message: ERROR WRITING DQCR RECORD
Explanation: An I/O error occurred while trying to update See TPF Operations for more information about the ZCTKA
an active queue control record. ALTER and ZCACH commands. See TPF Transmission Control
Protocol/Internet Protocol for more information about TPF
System action: The entry control block (ECB) exits. Internet mail server support.
User response: Do the following:
1. Review the system error dump to determine the cause of
the error.
098130 098133
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: AQ FACE ADDRESS CALC ERROR Error Message: AQ ID OR RCC FIND/HOLD RECORD
ERROR
Explanation: An error occurred while calculating the fixed
file address of the TPF active mail queue. This error can occur Explanation: A record ID or record code check (RCC) error
if a #MAILxx fixed file record type is not defined. There must occurred during an attempt to retrieve an active queue record.
be a different #MAILxx record type defined for each domain
System action: The entry control block (ECB) exits.
in your mail system.
User response: Do the following:
System action: The entry control block (ECB) exits.
1. Review the system error dump to determine the cause of
User response: Do one of the following: the error. The system error byte for the data level in error
v Define a #MAILxx fixed file record type for each domain in is in ECB field CE1SUD3 and CE1SUD6.
your mail system. 2. Correct the error.
v See your IBM representative to determine the cause of the
error and correct the error. See TPF Transmission Control Protocol/Internet Protocol for more
information about TPF Internet mail server support.
See TPF Transmission Control Protocol/Internet Protocol for more
information about how to configure your TPF system to use
TPF Internet mail server support. See TPF System Generation 098134
for more information about defining fixed file record types. Program: Displayed on the console and in the dump.
Error Message: DQ HARDWARE FIND/HOLD RECORD
098131 ERROR
Program: Displayed on the console and in the dump. Explanation: A hardware error occurred during an attempt to
Error Message: DQ FACE ADDRESS CALC ERROR retrieve an deferred queue record.
Explanation: An error occurred while calculating the fixed System action: The entry control block (ECB) exits.
file address of the TPF deferred mail queue. This error can User response: See your IBM representative to determine the
occur if a #MAILxx fixed file record type is not defined. There cause of the error and correct the error.
must be a different #MAILxx record type defined for each
domain in your mail system. See TPF Transmission Control Protocol/Internet Protocol for more
information about TPF Internet mail server support.
System action: The entry control block (ECB) exits.
User response: Do one of the following: 098135
v Define a #MAILxx fixed file record type for each domain in
Program: Displayed on the console and in the dump.
your mail system.
v See your IBM representative to determine the cause of the Error Message: DQ ID OR RCC FIND/HOLD RECORD
error and correct the error. ERROR
Explanation: A record ID or record code check (RCC) error
See TPF Transmission Control Protocol/Internet Protocol for more occurred during an attempt to retrieve an deferred queue
information about how to configure your TPF system to use record.
TPF Internet mail server support. See TPF System Generation
for more information about defining fixed file record types. System action: The entry control block (ECB) exits.
User response: Do the following:
098132 1. Review the system error dump to determine the cause of
the error. The system error byte for the data level in error
Program: Displayed on the console and in the dump.
is in ECB field CE1SUD3 and CE1SUD6.
Error Message: AQ HARDWARE FIND/HOLD RECORD 2. Correct the error.
ERROR
Explanation: A hardware error occurred during an attempt to See TPF Transmission Control Protocol/Internet Protocol for more
retrieve an active queue record. information about TPF Internet mail server support.
See TPF Transmission Control Protocol/Internet Protocol for more Error Message: AQCR GETFC FAILED
information about TPF Internet mail server support.
Explanation: While adding an active queue control record to
the active mail queue, the request to get a file pool address
and working storage block failed.
244 TPF Messages (System Error, Offline, and Program Status Word)
098137 • 09813C
System action: The entry control block (ECB) exits. 2. Correct the error.
User response: Do the following: 2. If the RIAT ID is not defined, define it. If the RIAT ID is
defined incorrectly, correct the definition.
1. Review the system error dump to determine the cause of
the error. The system error byte for the data level in error
See TPF Transmission Control Protocol/Internet Protocol for more
is in ECB field CE1SUD5 and CE1SUD6.
information about TPF Internet mail server support. See TPF
2. Correct the error. Operations for more information about the ZRTDM DISPLAY
command. See TPF System Generation for more information
See TPF Transmission Control Protocol/Internet Protocol for more about the RIAT.
information about TPF Internet mail server support.
09813C
098139
Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump.
Error Message: DQCR HARDWARE FIND ERROR
Error Message: AQCR FORWARD RECHAINING ERROR
Explanation: A hardware error occurred during an attempt to
Explanation: An error occurred on the forward chained retrieve a deferred queue control record.
active queue control record when trying to release an active
queue control record pool address back to the TPF system. System action: The entry control block (ECB) exits.
System action: The entry control block (ECB) exits User response: See your IBM representative to determine the
cause of the error and correct the error.
User response: Do the following:
See TPF Transmission Control Protocol/Internet Protocol for more
1. Review the system error dump to determine the cause of information about TPF Internet mail server support.
the error. The system error byte for the data level in error
is in ECB field CE1SUD6.
09813D 098141
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: DQCR ID OR RCC FIND ERROR Error Message: AQR GETFC FAILED
Explanation: A record ID or record code check (RCC) error Explanation: While adding an active queue record to the
occurred during an attempt to retrieve a deferred queue active mail queue, the request to get a file pool address and
control record. working storage block failed.
System action: The entry control block (ECB) exits. System action: The entry control block (ECB) exits.
User response: Do the following: User response: Do the following:
1. Review the system error dump to determine the cause of 1. Enter the ZRTDM DISPLAY command to display the
the error. The system error byte for the data level in error record ID attribute table (RIAT) ID definition and
is in ECB field CE1SUD5 and CE1SUD6. determine whether the RIAT ID is not defined or is
2. Correct the error. defined incorrectly.
2. If the RIAT ID is not defined, define it. If the RIAT ID is
See TPF Transmission Control Protocol/Internet Protocol for more defined incorrectly, correct the definition.
information about TPF Internet mail server support.
See TPF Transmission Control Protocol/Internet Protocol for more
information about TPF Internet mail server support. See TPF
09813E Operations for more information about the ZRTDM DISPLAY
Program: Displayed on the console and in the dump. command. See TPF System Generation for more information
about the RIAT.
Error Message: DQCR FORWARD RECHAINING ERROR
246 TPF Messages (System Error, Offline, and Program Status Word)
098144 • 09814A
See TPF Transmission Control Protocol/Internet Protocol for more Explanation: An error occurred during an attempt to update
information about TPF Internet mail server support. the cache for the deferred destination.
System action: The entry control block (ECB) continues to try
098145 to deliver the mail.
Program: Displayed on the console and in the dump. User response: Do one of the following:
v Enter the ZCTKA ALTER command to increase the amount
Error Message: DQR HARDWARE FIND ERROR of memory allocated for system heap frames.
Explanation: A hardware error occurred during an attempt to v Enter the ZCACH command to decrease the size of the
retrieve a deferred queue record. MAIL_CACHES cache.
System action: The entry control block (ECB) exits
See TPF Operations for more information about the ZCTKA
User response: See your IBM representative to determine the ALTER and ZCACH commands. See TPF Transmission Control
cause of the error and correct the error. Protocol/Internet Protocol for more information about TPF
Internet mail server support.
See TPF Transmission Control Protocol/Internet Protocol for more
information about TPF Internet mail server support.
098149
Program: Displayed on the console and in the dump. Error Message: MAIL ITEM HARDWARE FIND ERROR
Error Message: DQR ID OR RCC FIND ERROR Explanation: A hardware error occurred during an attempt to
retrieve a mail item.
Explanation: A record ID or record code check (RCC) error
occurred during an attempt to retrieve a deferred queue System action: The entry control block (ECB) exits.
record.
User response: See your IBM representative to determine the
System action: The entry control block (ECB) exits cause of the error and correct the error.
User response: Do the following: See TPF Transmission Control Protocol/Internet Protocol for more
1. Review the system error dump to determine the cause of information about TPF Internet mail server support.
the error. The system error byte for the data level in error
is in ECB field CE1SUD4. 09814A
2. Correct the error.
Program: Displayed on the console and in the dump.
See TPF Transmission Control Protocol/Internet Protocol for more Error Message: MAIL ITEM ID OR RCC FIND ERROR
information about TPF Internet mail server support.
Explanation: A record ID or record code check (RCC) error
occurred during an attempt to retrieve a mail item.
098147
System action: The entry control block (ECB) continues to
Program: Displayed on the console and in the dump. process other mail items.
Error Message: DESTINATION CACHE CREATE FAILED User response: Do the following:
Explanation: An error occurred during an attempt to create a 1. Review the system error dump to determine the cause of
cache for the deferred destination. the error. The system error byte for the data level in error
is in ECB field CE1SUD0.
System action: The entry control block (ECB) continues to try
2. Correct the error.
to deliver the mail.
User response: Do one of the following:
Explanation: The TPF debugger received an error return code Program: CUD2
when communicating with the TPF debugger user's
Error Message: THE REQUESTED OPERATION IS NOT
workstation on a TCP/IP session.
SUPPORTED
System action: The entry control block (ECB) exits.
Explanation: The TPF debugger front end requested an
User response: Do the following: operation that the back end does not support.
1. Examine the error code and determine the cause of the System action: The TPF debugger ignores the request.
error with the TCP/IP session.
User response: None, unless the TPF debugger front end
2. Correct the error and retry.
stops. If this occurs, see your IBM service representative to
report the problem.
0ADB02
Program: CUD1 0ADB0A
error code Explanation: The resume at function for the TPF debugger
The error code, which is defined in the iuddef.h C/C++ was called to restart an application that was being debugged,
header file. but the control information in the incoming debugger message
block was not correct.
Explanation: An unexpected and catastrophic system error
was detected in the TPF debugger subcommand handler. System action: The entry control block (ECB) exits.
System action: The entry control block (ECB) exits. User response: See your IBM service representative to report
the problem.
User response: See your IBM service representative to report
the problem.
248 TPF Messages (System Error, Offline, and Program Status Word)
0ADB0B • 0ADB16
System action: The entry control block (ECB) ends. number of global symbols that can be displayed at one time.
The current limit is 50 global symbols for each table: user
Program: CDB3 global symbol table, user symbol override table, and
Error Message: MALLOC FAILED FOR GLOBAL SYMBOL IBM-defined global symbol table.
SUPPORT: yyyy SYMBOL TABLE REQUIRES xxxx BYTES System action: A SNAP dump is issued that displays the
Where: message that corresponds to the table, as well as the variables
that are currently displayed in the expression monitor.
yyyy Processing continues.
One of the following:
User response: Do the following:
v USER OVERRIDE
v Delete at least one of the variables listed in the SNAP
v USER GLOBAL
dump.
v TPF GLOBAL.
v Enter the variable again.
xxxx
The amount of memory needed for the specified table.
0ADB18
Explanation: Large sections of memory must be allocated to
Program: CUDA
create the symbol information for the global symbols in the
TPF debugger. This includes user override symbols, user Error Message: TPF DEBUGGER COMMAND VIEW
global symbols, and IBM global symbols. The amount of REQUIRES MORE LNIATAS: numa REQUESTS numb
memory that must be allocated is proportional to the REQUESTS DENIED
complexity of the symbol definitions in the user symbol
override table, the user global symbol table, or the Where:
IBM-defined global symbol table; for example, a struct any * numa
variable requires more memory than a void * variable. This The number of TPF debugger Command view requests
error occurs when the amount of memory to allocate exceeds entered.
the limit of 4-KB frames.
numb
System action: The following occurs: The number of TPF debugger Command view requests
v Displayed on the console and in the dump. that were not fulfilled.
v Processing returns and continues. Explanation: The TPF debugger Command view requires a
v The table on which the memory allocation failed is dedicated line number, interchange address, and terminal
deactiviated. As a result, you cannot reference symbols in address (LNIATA). If all the LNIATAs for TPF debugger
that table, but you can reference variables in other tables if Command view are in use, the TPF debugger Command view
their memory allocation was successful. For example, if the will not fulfill the request and will notify you that the requests
memory was allocated properly for the user symbol were denied. If this condition occurs too often, this system
override table, but the the memory allocation for the IBM error message is used to notify the system administrator that
user global symbol table failed, you would be able to demand on the TPF debugger Command view LNIATAs is
display D0 from the user symbol override table, but greater than the supply of available LNIATAs.
ecbptr()->ce1cr0 (the same data) would not be displayed
because there is no symbol information available. System action: None.
User response: Modify keypoint A by doing one of the User response: The system administrator must follow the
following: instructions described in the ZDDBG command to increase the
supply of available LNIATAs.
v Enter ZCTKA ALTER EMPSvalue to increase the size of the
ECB heap. See TPF Operations for more information about the ZDDBG
v Enter ZCTKA ALTER MMHS value to increase the number command.
of 4KB frames that an ECB can acquire for heap storage.
0ADB19
See TPF Operations for more information about the ZCTKA
ALTER command. Program: CUDA
Error Message: TPF DEBUGGER COMMAND VIEW
0ADB17 LNIATA FILE CONTAINS NO VALID LNIATA
250 TPF Messages (System Error, Offline, and Program Status Word)
0ADB1A • 0ADB21
Error Message: TPF DEBUGGER COMMAND VIEW See TPF Operations for more information about the ZDDBG
CALLED PCRS WITH A PCRS OPERATION CODE THAT IS command.
NOT VALID
0ADB21
0ADB1D
Program: CDBD
Program: CDBI
Error Message: DUMP FILE IS CORRUPT. fread FAILED AT
Error Message: AN ERROR OCCURRED WHEN READING
FILE filename LINE linenum FOR THE FOLLOWING REASON:
LINE lnum OF THE TPF DEBUGGER COMMAND VIEW
reason DUMP FILE IS CORRUPT. fseek FAILED AT FILE
LNIATA FILE
filename LINE linenum
Where:
Where:
lnum
filename
The line number of the LNIATA file where the error
The name of the file that contains the debug statement
occurred.
where the failure occurred.
Explanation: The TPF debugger Command view LNIATA file
linenum
was not formatted correctly.
The line number where the error occurred.
System action: None.
reason User response: Correct the application that specified the file
A detailed explanation about the error. address that was not valid.
Explanation: The IBM TPF Toolkit for WebSphere Studio V2 Program: Displayed on the console and in the dump.
has attempted to register the TPF debugger with a session Error Message: ATTEMPT TO RELEASE IN-USE DECB
name that exceeds the maximum length.
Explanation: An application called the DECBC macro with
System action: The session name is truncated to a length that FUNC=RELEASE specified. However, the data event control
is valid and the registration completes successfully. block (DECB) that was specified to be released has a core
User response: Report the problem to your IBM service block attached.
representative. System action: The entry exits and non-catastrophic error
recovery is started.
0DE000–0DEFFF User response: Correct the application that attempted to
release a DECB that had a core block attached.
0DECB0 See TPF General Macros for more information about the
DECBC macro.
Program: Displayed on the console and in the dump.
Error Message: One of the following: 0DECB4
v DECB NOT VALID
Program: Displayed on the console and in the dump.
v DECB PASSED TO macroname MACRO IS NOT VALID
Error Message: ATTEMPT TO RELEASE DECB WITH I/O
Where: OUTSTANDING
macroname Explanation: An application called the DECBC macro with
The name of the macro that receives the incorrect data FUNC=RELEASE specified. However, the data event control
event control block (DECB). block (DECB) that was specified to be released has an
Explanation: The DECB address specified on a macro call did input/output (I/O) operation outstanding.
not reference a valid DECB. System action: The entry exits and non-catastrophic error
System action: The entry exits and non-catastrophic error recovery is started.
recovery is started. User response: Correct the application that attempted to
User response: Correct the application that specified the release a DECB that had an I/O operation outstanding.
DECB address that was not valid. See TPF General Macros for more information about the
DECBC macro.
0DECB1
Program: Displayed on the console and in the dump. 0DECB5
Error Message: 8-BYTE FILE ADDRESS NOT VALID Program: Displayed on the console and in the dump.
Explanation: The 8-byte symbolic file address specified on a Error Message: ATTEMPT TO RELEASE UNKNOWN DECB
macro call was not a valid file address. Explanation: An application called the DECBC macro with
System action: The entry exits and non-catastrophic error FUNC=RELEASE and the NAME parameter specified.
recovery is started. However, the data event control block (DECB) name that was
252 TPF Messages (System Error, Offline, and Program Status Word)
0DECB6 • 11F026
See TPF General Macros for more information about the User response: Review the system error dump for database
problems or for user error on input.
DECBC macro.
11F01A
0DECB7
Program: Displayed on the console and in the dump
Program: Displayed on the console and in the dump.
Error Message: None.
Error Message: ATTEMPT TO RELEASE DECB WITH
DETACHED CORE BLOCKS Explanation: The terminal type is not contained in the agent
assembly are (AAA) (WA0TYS) or in the routing control
Explanation: An application called the DECBC macro with block(RCB) (CI0TYS) while processing the AI-NAK entry.
FUNC=RELEASE specified. However, the data event control
block (DECB) that was to be released still has core blocks System action: A system error is issued with the return
associated with it that were previously detached from the option. Levels, if held, are released and the program is exited.
DECB by using the DETAC macro. User response: Review the system error dump for database
System action: The entry exits and non-catastrophic error problems or for user error on input.
recovery is started.
User response: Correct the application that attempted to 11F020
release a DECB that had detached core blocks associated with Program: Displayed on the console and in the dump
it.
Error Message: None.
See TPF General Macros for more information about the
DECBC and DETAC macros. Explanation: There was a retrieval error from file for the
output message.
User response: Review the system error dump for database System action: A system error is issued and the program is
problems or for user error on input. exited.
User response: Review the system error dump for database
11F027 problems or for user error on input.
System action: A system error is issued with the return System action: A system error is issued and the program is
option. Levels, if held, are released and the program is exited. exited.
User response: Review the system error dump for database User response: Review the system error dump for database
problems or for user error on input. problems or for user error on input.
11F029 11F02E
Program: Displayed on the console and in the dump Program: Displayed on the console and in the dump
Explanation: There was a retrieval error from a file of the Explanation: An error occurred because three OMSG blocks
output message. cannot fit into one 1055-byte block (AI-NAK retransmission).
System action: A system error is issued with the return System action: A system error is issued with the return
option. Levels, if held, are released and the program is exited. option. Levels, if held, are released and the program is exited.
User response: Review the system error dump for database User response: Review the system error dump for database
problems or for user error on input. problems or for user error on input.
11F02A 11F02F
Program: Displayed on the console and in the dump Program: Displayed on the console and in the dump
Explanation: There was an FILNC error on the output Explanation: An error occurred because a message is
message block during an AI-NAK retransmission. contained in more than 6 381-byte blocks.
System action: A system error is issued with the return System action: A system error is issued and the program is
option. Levels, if held, are released and the program is exited. exited.
User response: Review the system error dump for database User response: Review the system error dump for database
problems or for user error on input. problems or for user error on input.
11F02B 11F030
Program: Displayed on the console and in the dump Program: Displayed on the console and in the dump
Explanation: There was a retrieval error on a file copy of the Explanation: An error occurred because a message is
output record. contained in more than 6 381-byte blocks.
System action: A system error is issued with the return
254 TPF Messages (System Error, Offline, and Program Status Word)
888001 • AB0002
option. If levels are held, they are released and the program is
888004
exited.
Program: B1A7
User response: Review the system error dump for database
problems or for user error on input. Error Message: PROCESSOR ANCHOR FACE ERROR.
Explanation: During recoup processing, an error condition
888000–888FFF was detected by a FACE-type call while trying to retrieve the
system ordinal number (SON) skipped pool processor anchor
record.
888001
System action: Recoup processing continues.
Program: B1A7
User response: Do the following:
Error Message: SKIPPED POOL FIND/FILE ERROR. 1. Determine the cause of the error.
Explanation: During recoup processing, an error condition 2. Correct the error.
was detected while trying to find or file the recoup skipped
addresses directory (#SONSKP) record.
See TPF Database Reference for more information about recoup
System action: Recoup processing continues. functions and procedures.
System action: A full core dump is issued after the end of sent after this dump and then the TPF system is exited.
the affected test unit (the result of the CDMP PTV option).
User response: Determine whether too many records were
User response: None. requested for SFD/SFT. This condition occurs mainly with
SFD.
AB0005
Program: Displayed on the console and in the dump. AB0009
Error Message: LINE NUMBER NOT FOUND IN Program: Displayed on the console and in the dump.
SIMULATED LINE TABLE Error Message: BACKWARD TAPE READ ERROR ON DATA
Explanation: An input message that is not valid was found BASE RESTORE TAPE
on the input tape (TUT). The line number is not in the Explanation: A backward tape read error occurred on the
Program Test Vehicle (PTV) simulated line table.
database restore tape.
System action: A SNAPC dump is issued with a return
System action: The record is bypassed and the next record on
option and bypasses the message.
the database restore tape is processed.
User response: Do the following:
User response: Check for a possible hardware malfunction.
1. Verify the line number.
2. Update the PTV simulation table with the line number.
AB000A
256 TPF Messages (System Error, Offline, and Program Status Word)
AB0013 • AB0072
test vehicle (PTV) output. The real-time (RTL) tape is not error indicates that the counter is zero upon completion of the
available. table build process. Normally, a file address that is not valid is
reported to the operator and the ECB is exited prior to testing
System action: A system error dump is issued with the the counter. Therefore, either the counter was corrupted or a
return option. Tape write is bypassed. logic error occurred.
User response: Do the following: System action: An system error is issued and the ECB is
1. Mount the RTL tape. exited.
2. IPL the TPF system again. User response: Have your system programmer review the
3. Start PTV again. system error dump to determine the cause of the error and to
correct it.
AB0013
AB0032
Program: PTVG
Program: CTSF/CCUTIL
Error Message: ERROR READING TUT, PTV ABORTED
Error Message: SFT log buffer write error. Tape not mounted
Explanation: During program test vehicle (PTV) initialization,
or offline.
an error occurred while reading the test unit tape (TUT).
Explanation: The selective file dump and trace (SFDT)
System action: PTV processing is ended.
function is unable to write the filled log buffer to the real-time
User response: Do the following: (RTL) tape because the tape is not mounted or the tape is
offline.
1. Have your system programmer review the system error
dump to determine whether this is a hardware System action: The SFDT function is continued. New log
malfunction. information is not collected and is lost until the tape is
2. Enter the message again. mounted and the filled buffer is written to tape.
See TPF Program Development Support Reference for more Explanation: The test unit tape (TUT) has an improper
information. RUNID header.
System action: Exit the ECB.
AB0030
User response: Check the input tape and verify the RUNID.
Program: BMD0
AB0073 AB0090
Program: PTV3 Program: PTVR
System action: A catastrophic system error is issued and the System action: The entry control block (ECB) is exited and
TPF system is IPLed again. the PTV is aborted.
User response: Do the following: User response: Have your system programmer review the
1. Have your system programmer review the system error system error dump to determine the cause of the error and to
dump to determine whether this is a hardware correct it.
malfunction.
2. Start PTV processing again. C62000–C62FFF
AB0074
C62000
Program: PTV4
Program: Displayed on the console and in the dump
Error Message: UNABLE TO FILE PTVA KEYPOINT
Error Message: None.
Explanation: The PTV4 program tried to write to DASD and
Explanation: The conversation ID passed in the routing
was unable to do so. control parameter list (RCPL), which is defined in the
System action: A catastrophic system error is issued and the RCPL6CID field of the RC0PL data area, does not match the
TPF system is IPLed again. conversation ID of the conversation control block (CCB) to
which it points.
User response: Do the following:
System action: A system error is issued and the program is
1. Have your system programmer review the system error exited.
dump to determine whether this is a hardware
malfunction. User response: Review the system error dump to determine
why the conversation IDs are not equal.
2. Start PTV processing again.
C62001
AB0075
Program: Displayed on the console and in the dump.
Program: PTVH
Error Message: None.
Error Message: None.
Explanation: The conversation ID passed in the routing
Explanation: An error occurred during a reading of the test control parameter list (RCPL), which is defined by the
unit tape (TUT) while the program test vehicle (PTV) program RCPL6CID field of the RC0PL data area, contained zeros.
was running.
System action: A system error is issued and the program is
System action: PTV processing is ended. exited.
User response: Have your system programmer review the User response: Review the system error dump to determine
system error dump to determine cause of the error and to why the RCPL was not set up correctly.
correct it.
C62002
AB0076
Program: Displayed on the console and in the dump
Program: PTV3
Error Message: None.
Error Message: FACE ERROR ON PTVA KEYPOINT
Explanation: The session control block identifier (SCBID) in
Explanation: A file address compute program (FACE) error the routing control parameter list (RCPL) which is defined by
occurred on the PTVA keypoint. the RCPLORGR field of the RC0PL data area, does not match
the SCBID in the conversation control block (CCB).
System action: A catastrophic system error is issued, except
during restart. System action: A system error is issued and the program is
exited.
User response: Have your system programmer review the
system error dump to determine the cause of the error and to User response: Review the system error dump to determine
why the SCBIDs are not equal.
correct it.
258 TPF Messages (System Error, Offline, and Program Status Word)
C62003 • C62010
C62003 C62009
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump.
Error Message: None. Error Message: None.
Explanation: The conversation control block (CCB) pointed to Explanation: CHDR issues this error when a segment in the
by the conversation ID in the routing control parameter list presentation services (PS) layer requests a send data record
(RCPL), which is defined in the RCPL6CID field of the RC0PL function but the data type is not valid.
data area, is marked as not in use.
System action: The DEALLOCATE_CLEANUP (CHQF)
System action: A system error is issued and the program is process is activated.
exited.
User response: Review the system error dump to determine
User response: Review the system error dump to determine
the cause of the error and to correct it.
whether that CCB is actually in use and if not, why the
RCPL6CID field is pointing to it.
C6200B
C62006 Program: Displayed on the console and in the dump.
Program: Displayed on the console and in the dump Error Message: None.
Error Message: None. Explanation: CHDR issues this error when a segment in the
Explanation: The required request block on data level 14 resource manager (RM) layer requests a half-session function
(D14) was not passed. that is not valid.
System action: The DEALLOCATE_CLEANUP (CHQF) System action: The DEALLOCATE_CLEANUP (CHQF)
process is activated. process is activated.
User response: Review the system error dump to determine User response: Review the system error dump to determine
the cause of the error and to correct it. the cause of the error and to correct it.
C62007 C6200D
Program: Displayed on the console and in the dump. Program: Displayed on the console and in the dump
Error Message: None. Error Message: None.
Explanation: The required functional management header Explanation: CHDR issues this error when a segment in the
(FMH) was not passed in the request block on data level 14 half-session (HS) requests a half-session function that is not
(D14). valid.
System action: The DEALLOCATE_CLEANUP (CHQF) System action: The DEALLOCATE_CLEANUP (CHQF)
process is activated. process is activated.
User response: Review the system error dump to determine User response: Review the system error dump to determine
the cause of the error and to correct it. the cause of the error and to correct it.
C62008
C6200F
Program: Displayed on the console and in the dump
Program: Displayed on the console and in the dump.
Error Message: None.
Error Message: None.
Explanation: CHDR issues this error when a segment in the
Explanation: The error finite state machine is in an illogical
presentation services (PS) layer requests a half-session function
that is not valid. state.
System action: The DEALLOCATE_CLEANUP (CHQF) System action: The ATTACH_ERROR (CHQD) process is
process is activated. activated.
User response: Review the system error dump to determine User response: Do one of the following:
the cause of the error and to correct it. v Check the remote transaction program that issued the
ALLOCATE.
Program: C266, C267, C268, or C278
v Check the transaction program name table (TPNT).
Error Message: INVALID MAPPED CONVERSATION
SUPPORT VERB Explanation: A local TPF transaction program issued an
ALLOCATE request, but the length of the transaction program
Explanation: A mapped conversation macro passed a verb name specified on the ALLOCATE verb is not valid. The
parameter that is not valid to a C library function. length must be between 1 and 64.
System action: If an active conversation exists for the System action: The TPF system returns to the transaction
conversation control block (CCB), the conversation is abended program with a parameter check.
(DEALLOCATE TYPE=DEALLOCATE_SVC). The Mapped
Conversation Support API sets the return code to User response: Correct the transaction program that issued
CM_PRODUCT_SPECIFIC_ERROR and returns to the calling the ALLOCATE verb.
function.
User response: Review the system error dump to determine C6201B
the cause of the error and to correct it.
Program: Displayed on the console and in the dump
Explanation: The PREPARE_TO_RECEIVE verb was issued System action: The DEALLOCATE_CLEANUP (CHQF)
with TYPE=CONFIRM while the synchronization level (SYNC) process.
was NONE.
User response: Review the system error dump to determine
System action: The DEALLOCATE_CLEANUP (CHQF) the cause of the error and to correct it.
process is activated.
User response: Check the transaction program that issued the C6201C
verb.
Program: Displayed on the console and in the dump
260 TPF Messages (System Error, Offline, and Program Status Word)
C6201D • C6202A
Explanation: An ATTACH header (DSECT IFMH5) that is not User response: Review the system error dump to determine
valid was received. the cause of the error and to correct it.
User response: Check that the remote logical unit (LU) sent Program: Displayed on the console and in the dump
out the ATTACH.
Error Message: None.
Explanation: When requesting a session, this error occurs User response: Review the system error dump to determine
when the destination LU_NAME passed is not a valid LU 6.2 the cause of the error and to correct it.
node defined by OSTG or when the LU_NAME is not unique.
If the LU_NAME is not unique, it must be qualified with a C6202A
network identifier (NETID).
Program: Displayed on the console and in the dump
System action: The TPF system returns control to the
Error Message: None.
previous segment (through the BACKC macro).
Explanation: The EVNTC macro was issued with a duplicate
User response: Check the transaction program that requested
name.
the session.
System action: The DEALLOCATE_CLEANUP (CHQF) System action: The TPF system brings down the session with
process is activated. the remote logical unit (LU) and issues the C62031 system
error.
User response: Review the system error dump to determine
the cause of the error and to correct it. User response: Review the system error dump to determine
the cause of the error and to correct it.
C6202E
C62032
Program: Displayed on the console and in the dump
Program: Displayed on the console and in the dump
Error Message: None.
Error Message: None.
Explanation: A routing control parameter list (RCPL) that
was not valid was received. The RCPL indicated a begin Explanation: The remote logical unit (LU) sent a functional
bracket (BB) but the ATTACH header (DSECT IFMH5) was not management header type 7 (the IFMH7 DSECT) error record
valid or was missing. that is not valid.
System action: A system error is issued and the program is System action: The PS_PROTOCOL_ERROR (CHQH) process
exited. is activated.
User response: Review the system error dump to determine User response: Review the system error dump to determine
the cause of the error and to correct it. the cause of the error and to correct it.
262 TPF Messages (System Error, Offline, and Program Status Word)
C62033 • C6203D
Explanation: An I/O error occurred attempting to add a Program: Displayed on the console and in the dump
record to the conversation control block (CCB) inbound queue
Error Message: None.
for a conversation.
Explanation: This error occurs when there is a time out
System action: The TPF system unbinds the session.
during an EVNWC.
User response: None.
System action: The DEALLOCATE_CLEANUP (CHQF)
process is activated.
C62034
User response: Review the system error dump to determine
Program: Displayed on the console and in the dump the cause of the error and to correct it.
User response: Review the system error dump to determine Explanation: This error is issued when a program issues an
the cause of the error and to correct it. ALLOCATE request but no conversation control control blocks
(CCBs) are defined to the TPF system.
Program: Displayed on the console and in the dump User response: To define more CCBs to the TPF system,
increase the value of MAXCCB in the SNA keypoint (DSECT
Error Message: None. CK2SN).
Explanation: This error is issued when there is an error
return code from POSTC because the event name was not C6203D
found.
Program: Displayed on the console and in the dump
System action: If the error occurs in the CHDF segment, the
TPF system exits. Otherwise, the DEALLOCATE_CLEANUP Error Message: None.
(CHQF) process is activated. Explanation: This occurs when the
User response: Review the system error dump to determine DEALLOCATE_CLEANUP procedure is unable to return the
the cause of the error and to correct it. conversation control block (CCB) to the available list because
CCB ID in the work buffer (which is defined by the IWBL
data macro) is not valid.
C62037
System action: Control is returned to the previous segment
Program: Displayed on the console and in the dump through the BACKC macro.
Error Message: None. User response: Review the system error dump to determine
the cause of the error and to correct it.
Explanation: This error occurs when the destination session
control block identifier (SCBID) in the conversation control
block (CCB) is not valid.
System action: Control is returned to the previous segment
through the BACKC macro.
only be issued by the ECB that issued the ILCKCB for that
C6203F
control block.
Program: Displayed on the console and in the dump
System action: A system error is issued and processing is
Error Message: None. continued.
Explanation: The TPF system issues this error when an error User response: Review the system error dump to determine
is received from the EVNWC macro because the event name the cause of the error and to correct it. If necessary, see your
was not found. IBM service representative.
User response: Review the system error dump to determine Program: Displayed on the console and in the dump
the cause of the error and to correct it.
Error Message: None.
Explanation: The transaction program issued a WAIT verb
C62040
with more than the maximum number of entries allowed in
Program: Displayed on the console and in the dump the resource identifier (RID) list.
Error Message: None. System action: Processing is continued ignoring any entries
above the maximum number.
Explanation: A protocol error was detected but TPF was
unable to terminate the session. User response: Check the transaction program that issued the
WAIT verb. Correct the logic that produces more than the
System action: The TPF system returns control to the maximum number of entries in the resource identifier (RID)
previous segment through the BACKC macro. list.
User response: Review the system error dump to determine
the cause of the error and to correct it. C62047
264 TPF Messages (System Error, Offline, and Program Status Word)
C62049 • C62050
C62049 C6204C
Program: CHRA Program: CHRG
Error Message: ALL TPICBS IN USE — CHECK TPICB Error Message: None.
CORE ALLOCATION
Explanation: A request was made to get a session control
Explanation: A transaction program called the TPPCC block (SCB) entry for a logical unit (LU) but the resource
ALLOCATE macro and the ALLOCATE processing requires identifier (RID) was not correct.
allocation of a transaction program instance control block
System action: None.
(TPICB) but all of the TPICBs are already in use.
User response: Review the system error dump to determine
System action: Control returns to the transaction program
with the storage specified by the RCODE macro parameter set why the RID passed to CHRG was not correct and correct the
error.
to LU62RC_ALLOC_ERROR,
LU62RC_ALLOCERR_NORETRY.
User response: Define sufficient TPICBs in the TPF system by C6204D
increasing the value of MAXTPI in the Systems Network Program: CHRR
Architecture (SNA) keypoint (CTK2).
Error Message: None.
Error Message: UNABLE to RELEASE TPICB Explanation: One of the following errors occurred:
v An incorrect session control block identifier (SCBID) was
Explanation: The transaction program instance control block
passed to this segment.
(TPICB) ordinal number in the exiting ECB is not zero. This
indicates that a TPICB is assigned to the ECB but the ITPICB v The session control block (SCB) entry pointed to by the
header indicates that no TPICBs are currently assigned. SCBID is not associated with a resource vector table (RVT)
entry.
System action: Exit processing is continued for the ECB.
v The resource identifier (RID) field in the SCB should contain
User response: Review the system error dump to determine the address of the owning resource vector table (RVT) but
the cause of the error and to correct it. If necessary, see your does not.
IBM service representative.
System action: The entry control block (ECB) exits.
User response: Review the system error dump to determine
C6204B
the cause of the error and to correct it.
Program: CHRG
Error Message: ALL SCB BLOCKS IN USE C62050
User response: Review the system error dump and the Program: C265
program segment that issued the mapped conversation verb to
Error Message: EITHER FIELD OR LEVEL ARE NEEDED
determine the cause of the error and correct it.
FOR ACTIVATE ON RECEIPT
Error Message: UNKNOWN TPPC RCODE RETURNED TO System action: Control is returned to the caller with the
MAPPED SUPPORT RCODE parameter set to LU62RC_PARAMETER_CHECK,
LU62RC_PK_BAD_OPTION.
Explanation: A TPF/APPC basic verb called by mapped
conversation support returned a return code value that User response: Correct the error in the function call.
mapped conversation support does not recognize.
See TPF C/C++ Language Support User's Guide for more
System action: If an active conversation exists for the CCB, information about the tppc_activate_on_receipt function and
the conversation is abended (DEALLOCATE its parameters.
TYPE=DEALLOCATE_SVC). The Mapped Conversation
Support API sets the return code to
266 TPF Messages (System Error, Offline, and Program Status Word)
C62074
See TPF C/C++ Language Support User's Guide for more Program: C253
information about the tppc_receive function and its
Error Message: INVALID LOGDATA OPTION PASSED TO
parameters.
TPPC DEALLOCATE FUNCTION
Explanation: The TPF/APPC tppc_deallocate function was
C62074
passed a LOGDATA parameter value other than
Program: C264 DEALLOCATE_LOGDATA_NO.
Error Message: INVALID LEVEL OPTION PASSED TO TPPC System action: Control is returned to the caller with the
ACTIVATE ON CONFIRMATION FUNCTION RCODE parameter set to LU62RC_PARAMETER_CHECK,
LU62RC_PK_BAD_OPTION.
Explanation: The TPF/APPC tppc_activate_on_confirmation
function was passed a LEVEL parameter value other than User response: Correct the error in the function call.
AOC_D0, AOC_D1, AOC_D2, AOC_D3, AOC_D4, AOC_D5,
See TPF C/C++ Language Support User's Guide for more
268 TPF Messages (System Error, Offline, and Program Status Word)
C62074
System action: Control is returned to the caller with the RCODE parameter set to LU62RC_PARAMETER_CHECK,
RCODE parameter set to LU62RC_PARAMETER_CHECK, LU62RC_PK_BAD_OPTION.
LU62RC_PK_BAD_OPTION.
User response: Correct the error in the function call.
User response: Correct the error in the function call.
See TPF C/C++ Language Support User's Guide for more
See TPF C/C++ Language Support User's Guide for more information about the tppc_send_error function and its
information about the tppc_allocate function and its parameters.
parameters.
C62074
C62074
Program: C264
Program: C253
Error Message: INVALID VERB OPTION PASSED TO TPPC
Error Message: INVALID TYPE OPTION PASSED TO TPPC ACTIVATE ON CONFIRMATION FUNCTION
DEALLOCATE FUNCTION
Explanation: The TPF/APPC tppc_activate_on_confirmation
Explanation: The TPF/APPC tppc_deallocate function was function was passed a VERB parameter value other than
passed a TYPE parameter value other than: AOC_CONFIRM, AOC_DEALLOC or AOC_P_T_R.
v DEALLOCATE_TYPE_SYNC
v DEALLOCATE_TYPE_FLUSH System action: Control is returned to the caller with the
v DEALLOCATE_TYPE_CONFIRM RCODE parameter set to LU62RC_PARAMETER_CHECK,
v DEALLODATE_TYPE_LOCAL LU62RC_PK_BA_OPTION.
v DEALLOCATE_TYPE_ABENDP User response: Correct the error in the function call.
v DEALLOCATE_TYPE_ABENDS
v DEALLOCATE_TYPE_ABENDT. See TPF C/C++ Language Support User's Guide for more
information about the tppc_activate_on_confirmation
System action: Control is returned to the caller with the function and its parameters.
RCODE parameter set to LU62RC_PARAMETER_CHECK,
LU62RC_PK_BAD_OPTION.
C62074
User response: Correct the error in the function call.
Program: C258
See TPF C/C++ Language Support User's Guide for more
information about the tppc_deallocate function and its Error Message: INVALID WAIT OPTION PASSED TO TPPC
parameters. RECEIVE FUNCTION
C62074
C62102
Program: C258
Program: CSBJ
Error Message: RECEIVE LENGTH AND DATA MUST BE
EITHER BOTH NULL OR BOTH NOT NULL Error Message: INVALID APPN REGISTER REPLY
RECEIVED
Explanation: The TPF/APPC tppc_receive function was
passed either NULL LENGTH with non-NULL DATA, or Explanation: While performing the APPN LU registration
non-NULL LENGTH with NULL DATA. process, the remote CP sent the TPF system a register reply
containing data that is not valid.
System action: Control is returned to the caller with the
RCODE parameter set to LU62RC_PARAMETER_CHECK, System action: The LU registration process is ended.
LU62RC_PK_BAD_OPTION.
User response: Review the register request and register reply
User response: Correct the error in the function call. included with the dump to determine the cause of the error.
270 TPF Messages (System Error, Offline, and Program Status Word)
C62105 • C6210D
See TPF Operations for more information about the ZNAPN does not contain a fully qualified PCID control vector (CV
command. X'60'). A LOCATE PIU, by definition, must contain a fully
qualified PCID control vector.
C62105 System action: The TPF system rejects the LOCATE request.
Program: CSBF User response: Review the system error dump to determine
the cause of the error.
Error Message: INVALID APPN FUNCTION CODE
Explanation: A function code that is not valid was passed to C6210A
the CSBF segment.
Program: CSBI
System action: The request is rejected.
Error Message: UNABLE TO FIND CD-TERMINATE
User response: Review the system error dump to determine PARAMETERS CONTROL VECTOR
why the function code is not valid.
Explanation: A CD-TERMINATE NOTIFY GDS variable was
received by the TPF system as part of a LOCATE PIU. The
C62106 NOTIFY(CDTERM) GDS received by the TPF system did not
Program: CSBK contain a CD-terminate parameters control vector (CV X'80').
A NOTIFY(CDTERM) GDS must, by definition, contain a
Error Message: INVALID CPUID PASSED FOR TG CD-TERMINATE parameters control vector.
REGISTRATION
System action: The TPF system rejects the LOCATE request.
Explanation: A request was made to register the transmission
groups (TGs) for a given TPF processor, but the CPU ID User response: Review the system error dump to determine
passed to the CSBK segment was not valid. the cause of the error.
Program: CSBI Explanation: A FIND GDS variable was received by the TPF
system as part of a LOCATE PIU. The FIND GDS received by
Error Message: NCB CONTAINS INVALID CPU ID the TPF system did not contain a search argument directory
entry control vector (CV X'82'). A FIND GDS must, by
Explanation: The node control block (NCB) associated with a
definition, contain a search argument directory entry control
remote resource was retrieved to determine which TPF
vector.
processor owned the session with that resource. The CPU ID
found in the NCB was not a valid CPU ID. System action: The TPF system rejects the LOCATE request.
System action: The TPF system rejects the APPN LOCATE User response: Review the system error dump to determine
request. the cause of the error.
User response: Review the system error dump to determine
the cause of the error. C6210C
Program: CSBP
C62108
Error Message: UNABLE TO FIND PCID MODIFIER
Program: CSBI CONTROL VECTOR
Error Message: MISSING REQUIRED LOCATE GDS IN Explanation: A LOCATE PIU received by the TPF system did
LOCATE PIU not contain a PCID modifier control vector (CV X'81'). A
LOCATE PIU must, by definition, contain a PCID modifier
Explanation: A LOCATE PIU received by the TPF system did
control vector.
not contain the required LOCATE GDS variable.
System action: The TPF system rejects the LOCATE request.
System action: The TPF system rejects the LOCATE request.
User response: Review the system error dump to determine
User response: Review the system error dump to determine
the cause of the error.
the cause of the error.
C6210D
C62109
Program: CSBL, CSBP
Program: CSBI
Error Message: UNABLE TO FIND COS/TPF CONTROL
Error Message: UNABLE TO FIND FULLY QUALIFIED
VECTOR
PCID CONTROL VECTOR
Explanation: A LOCATE request received by the TPF system
Explanation: A LOCATE PIU received by the TPF system
did not contain a class of service control vector (CV X'2C') in System action: The TPF system rejects the LOCATE PIU.
the CDINIT GDS variable.
User response: Review the system error dump to determine
System action: The TPF system rejects the LOCATE request. the cause of the error.
C6210F C62113
Program: CSBQ Program: CSBQ
Error Message: UNABLE TO FIND BIND IMAGE CONTROL Error Message: UNABLE TO READ IN SAVED LOCATE
VECTOR REPLY
Explanation: A LOCATE PIU received by the TPF system did Explanation: A LOCATE dequeue request was received, but
not contain a BIND image control vector (CV X'31') in the an I/O error occurred when the TPF system tried to read in
CDINIT GDS variable. For LU-LU session requests where the the previous LOCATE PIU that was saved on DASD.
remote LU is the secondary LU (SLU), the CDINIT GDS
variable must contain a BIND image control vector. System action: The TPF system rejects the LOCATE PIU.
System action: The TPF system rejects the LOCATE PIU. User response: Review the system error dump to determine
the cause of the error.
User response: Review the system error dump to determine
the cause of the error.
C62114
C62110 Program: CSBW
Program: CSBQ Error Message: TAPST CONTAINS INVALID CPU ID
Error Message: UNABLE TO FIND TG DESCRIPTOR Explanation: When building a LOCATE, or processing a
CONTROL VECTOR LOCATE that contains a route selection control vector (CV
X'2B'), an entry in the in-core TAPST was found to have a
Explanation: A LOCATE PIU received by the TPF system
CPU ID that is not valid.
included a route selection control vector (CV X'2B') that did
not contain any transmission group (TG) descriptor control System action: The TPF system rejects the LOCATE PIU.
vectors (CV X'46'). TG descriptor control vectors are required
fields in a route selection control vector. User response: Review the system error dump to determine
the cause of the error.
System action: The TPF system rejects the LOCATE PIU.
User response: Review the system error dump to determine C62115
the cause of the error.
Program: CSBQ
Program: CSBQ Explanation: The TPF system could not allocate enough
space to process an incoming LOCATE PIU.
Error Message: UNABLE TO FIND COMMAND
PARAMETERS CONTROL VECTOR System action: The TPF system rejects the LOCATE request.
Explanation: A LOCATE reply received by the TPF system User response: See your system programmer for more
included a FOUND GDS variable that did not contain a information.
command parameters control vector (CV X'80'). The command
parameters control vector is a required field in a FOUND GDS
variable.
272 TPF Messages (System Error, Offline, and Program Status Word)
C62200 • C62205
C62200 C62203
Program: CSGJ Program: CSH4
Error Message: HPRMT QUEUE IS NOT VALID FOR RTPCB Error Message: MISSING REQUIRED DATA IN ROUTE
rtpcb SETUP REQUEST
Where: Explanation: The TPF system received a ROUTE_SETUP
request that did not contain all of the required control vectors.
rtpcb
The rapid transport protocol control block (RTPCB) index System action: The TPF system sends a negative
of the rapid transport protocol (RTP) connection. ROUTE_SETUP reply.
Explanation: The chain pointers in the high-performance User response: Review the system error dump to determine
routing message table (HPRMT) queue for the specified RTP the cause of the error.
connection are not valid.
See TPF ACF/SNA Data Communications Reference for more
System action: A system error dump is issued and the information about ROUTE_SETUP commands.
HPRMT queue for the specified RTP connection is cleared.
C62206 C6220A
Program: CSG7 Program: CS0P
Error Message: HPRSAT IS FULL Error Message: MAXIMUM PACKET SIZE IS NOT VALID
Explanation: During Systems Network Architecture (SNA) Explanation: The TPF system received a network layer
restart, the TPF system tried to get an entry in the packet (NLP) containing the Switching Information (SI)
high-performance routing session address table (HPRSAT) for segment, but the maximum packet size specified was not
a high-performance routing (HPR) LU-LU session, but the valid.
HPRSAT was full.
System action: The TPF system ends the rapid transport
System action: A SNAPC dump is issued. SNA restart ends protocol (RTP) connection.
and state change is disabled in the TPF system.
User response: Review the system error dump to determine
User response: Do the following: the cause of the error.
1. Increase the size of the HPRSAT using the MAXHPRSA See TPF ACF/SNA Data Communications Reference for more
parameter in the SNAKEY macro. information about RTP connections.
2. Assemble and reload the updated SNA keypoint (CTK2).
3. IPL the TPF system. C6220B
See TPF ACF/SNA Network Generation for more information Program: CSKH
about the SNAKEY macro. See TPF ACF/SNA Data Error Message: FACS OR FILE ERROR ON RECORD rectype
Communications Reference for more information about the ORDINAL NUMBER ordnum
HPRSAT.
Where:
C62207 rectype
The record type, which is RT1RI or RT2RI.
Program: CS0R
ordnum
Error Message: AN INCORRECT SOUTC TYPE=H MACRO The ordinal number.
CALL WAS ISSUED
Explanation: While keypointing the rapid transport protocol
Explanation: The SOUTC macro was issued with the control block (RTPCB) table, an error was returned by the file
TYPE=H parameter specified. However, the value specified for address retrieval program (FACS), or an input/output (I/O)
the NLP1SOUTC_H field in the message block was not error occurred while filing the record to DASD.
correct.
System action: The TPF system stops keypointing the RTPCB
System action: The message block is released and control is table.
returned to the calling segment.
User response: Review the system error dump to determine
User response: Review the program that issued the SOUTC the cause of the error.
macro to determine the cause of the error.
See TPF ACF/SNA Data Communications Reference for more
See TPF System Macros for more information about the SOUTC information about the RTPCB table.
macro.
C6220C
C62209
Program: CSKH
Program: CS0P
Error Message: VALIDITY BIT ERROR IN RTPCB TABLE
Error Message: MISSING REQUIRED DATA IN SWITCHING
INFORMATION SEGMENT Explanation: While keypointing the rapid transport protocol
control block (RTPCB) table, the TPF system determined that
Explanation: The TPF system received a network layer the validity bit in an RTPCB table entry was not valid.
packet (NLP) containing the Switching Information (SI)
segment, but the SI segment did not contain all of the required System action: A catastrophic system error is issued.
information.
User response: Review the system error dump to determine
System action: The TPF system ends the rapid transport the cause of the error.
protocol (RTP) connection.
See TPF ACF/SNA Data Communications Reference for more
User response: Review the system error dump to determine information about the RTPCB table.
the cause of the error.
See TPF ACF/SNA Data Communications Reference for more CE9000–CE9FFF
information about RTP connections.
274 TPF Messages (System Error, Offline, and Program Status Word)
CE910C • F0108F
CE910C F0102F
Program: CSEH Program: Displayed on the console and in the dump
Error Message: RVT/CCW/SAT MISMATCH OCCURRED Error Message: FACE ERROR
Explanation: A ZNETW INACT,F of an inactive Network Explanation: There was a file address compute program
Control Program (NCP) or CTC is performed but the CCW (FACE) error while trying to find the terminal annex table
area or SAT associated with the network addressable unit (XTAT) record address for alternate routing processes.
(NAU) is active. This indicates that the Systems Network
Architecture (SNA) tables for this NAU are out of sync. System action: A system error is issued and the terminal is
skipped for alternate routing.
System action: A dump is issued showing the status of the
resource vector table (RVT), CCW area, and SAT associated User response: Have your system programmer review the
with the NAU being deactivated. These areas are then cleaned system error dump to determine the cause of the error and to
up. correct it.
CE9383 F0107E
Error Message: FIND ERROR ON ZPTCH PATCH DECK Error Message: None.
Explanation: There is an APPLICATION/ARINC terminal
Explanation: An error was found while trying to retrieve the
ordinal number for a non-APPLICATION/ARINC terminal
ZPTCH patch deck.
type.
System action: A SNAPC dump is issued showing the
System action: An answer-back is not sent.
current content of the general registers, file address reference
word 3 (CE1FA3), core block reference word 3 (CE1CR3), and User response: None.
the data level 3 error detail indicator (CE1SUD). The ECB is
then exited.
F0108F
User response: Do the following:
Program: Displayed on the console and in the dump
1. Review the system error dump to determine the cause of
the error. Error Message: None.
2. Correct the error. Explanation: There was a file address compute program
3. Try the failing operation again. (FACE) error while calculating the file address of the terminal
annex table (XTAT) record.
System action: A SERRC macro is issued and no monitoring
F01000–FFFFFF is performed.
User response: None.
F010A0 F010FE
Program: Displayed on the console and in the dump Program: Displayed on the console and in the dump
Error Message: None. Error Message: None.
Explanation: There was an error on the FILNC macro of the Explanation: An incomplete message is on file when a new
Communication Message Format (XMSG) record after message arrives.
updating the address count.
System action: the incomplete message is cleared and the
System action: An error number is sent to the operator. The message segment file address is released.
FILNC macro is bypassed since the segment was already filed
with a higher address count. User response: Eliminate the incomplete message from the
TPF system, release all message file addresses, and clear the
User response: None. associated line/terminal status records.
F010AF F01128
Program: Displayed on the console and in the dump Program: Displayed on the console and in the dump
Error Message: None. Error Message: None.
Explanation: There was a file address compute program Explanation: When an incomplete message is found in the
(FACE) error while trying to get a file address of the Special TPF system with the arrival of a new message, the input
Distribution Lists record for a group. address. control table record pertinent to the line/terminal cannot be
updated with a file.
System action: A SERRC macro is issued and is returned
without processing the group address. System action: This is a fixed-file record that is cleared by
the error correction program.
User response: None.
User response: None.
F010CE
F01150
Program: Displayed on the console and in the dump
Program: Displayed on the console and in the dump
Error Message: None.
Error Message: None.
Explanation: An input line number that is not valid was
detected by the Message Switching Input Message Assembly Explanation: While releasing the segment of a message that
program. was QTA ED, a segment file record cannot be obtained.
System action: The program is exited. System action: The last message segment is released, if
possible, and there is an answer back to the HDX terminal.
User response: An error number is sent to the operator.
User response: None.
F010EF
F01158
Program: Displayed on the console and in the dump
Program: Displayed on the console and in the dump
Error Message: None.
Error Message: None.
Explanation: There was a file address compute program
(FACE) error in the process of obtaining the file address of the Explanation: The record in which the high-speed message
input control table record. segments are being compiled cannot be obtained.
System action: None. System action: A SERRC macro is issued and the associated
status records pertinent to the console are cleared.
User response: Initialize the global records again.
User response: None.
F010F0
F01168
Program: Displayed on the console and in the dump
Program: Displayed on the console and in the dump
Error Message: None.
Error Message: None.
Explanation: If an incomplete message is found on file when
a new message arrives, the incomplete message must be Explanation: The input control record for the high-speed
eliminated. While chasing the message chain, a segment file terminal cannot be filed.
address was altered and cannot be located.
System action: Control is passed to the error correction
System action: All status records are cleared and the last program to clear the record.
message segment file address is released.
User response: None.
User response: None.
276 TPF Messages (System Error, Offline, and Program Status Word)
F01170 • F011F7
F01170 F011AF
Program: Displayed on the console and in the dump Program: Displayed on the console and in the dump
Error Message: None. Error Message: None.
Explanation: At the end of a message, the prime message Explanation: There is a file address compute program (FACE)
segment file record cannot be obtained to pass on to XHAP. error and the record type is XSRI.
System action: None. System action: A SERRC macro is issued and the TPF system
returns.
User response: Release the last segment file address and send
an answer back to the HDX terminal. User response: None.
F01178 F011B7
Program: Displayed on the console and in the dump Program: Displayed on the console and in the dump
Error Message: None. Error Message: None.
Explanation: A 340-byte message segment of the high-speed Explanation: Find the output RES message record during a
message cannot be released. file address release routine.
System action: The last message segment is released, if System action: A SERRC macro is issued, the output queue is
necessary. cleared up, and processing is continued.
User response: None. User response: None.
F01197 F011D7
Program: Displayed on the console and in the dump Program: Displayed on the console and in the dump
Error Message: None. Error Message: None.
Explanation: There was an error finding the last output Explanation: Find the next output message record.
message record on the XLMT (Copy Message Transmission)
queue. System action: The XLZI program is entered to replace the
record with QTB, and a SERRC macro is issued.
System action: The XLZ1 program is entered, which chases
through the chain until the bad record is reached and replaces User response: None.
the bad record with QTB and BACK to the originating
program. F011D9
User response: Review the system error dump to determine Program: Displayed on the console and in the dump
the cause of the error and to correct it.
Error Message: None.
Program: Displayed on the console and in the dump Explanation: A FIND error occurred while retrieving the
output message record when releasing the file address of a
Error Message: None. transmitted message.
Explanation: There was a file address compute program System action: A SERRC macro is issued. The output queue
(FACE) error in the XIRI record. is cleaned up and processing is continued.
System action: A system error is issued. User response: None.
User response: None.
F0122F
F01217
Program: Displayed on the console and in the dump
Program: Displayed on the console and in the dump
Error Message: None.
Error Message: None.
Explanation: Alternate routing — 1053 fallback was tried
Explanation: Find the output message record. during a period that recoup was accessing the long message
assembly (LMA) area records.
System action: The XLZI program is entered to replace the
record with QTB. A SERRC macro is issued and control is This system error is also issued when two 1053 fallback
returned to the the program that issued the dump. functions are attempted at the same time.
User response: Review the system error dump to determine System action: A SERR macro is issued.
the cause of the error and to correct it.
User response: Enter the request for 1053 fallback again.
F0121F
F01237
Program: Displayed on the console and in the dump
Program: Displayed on the console and in the dump
Error Message: None.
Error Message: None.
Explanation: There was a file address compute program
(FACE) error in the XSORI record type. Explanation: Find the output message record.
System action: A SERRC macro is issued with the option System action: The XLZ1 program is entered to chain-chase,
return. replace the bad record with QTB, issue a SERRC macro, and
go back to the program that issued the dump.
User response: None.
User response: Review the system error dump to determine
the cause of the error and to correct it.
F01226
Program: Displayed on the console and in the dump
F0124F
Error Message: None.
Program: Displayed on the console and in the dump
Explanation: The long message transmitter (LMT)
restart/timeout routine (XLJJ) had an error occur while trying Error Message: None.
to retrieve a specific Long Message Transmission Assembly Explanation: An error occurred while the TPF system was
Area record.
trying to resolve a file address.
System action: The following LMT error correction segments
System action: The request is ignored and processing is
were activated to retrieve the record or a copy of the record,
continued.
and to correct the data error:
v XLZ1 User response: None.
v XLZ2
v XLZ3
v XLZ4.
278 TPF Messages (System Error, Offline, and Program Status Word)
F0125E • F01301
F0125E F0129E
Program: Displayed on the console and in the dump Program: Displayed on the console and in the dump
Program: Displayed on the console and in the dump Error Message: None.
System action: The ordinal number that is not valid is User response: None.
ignored.
User response: None. F012EF
Program: Displayed on the console and in the dump Error Message: None.
Error Message: None. Explanation: The TPF system was unable to retrieve the
output message.
Explanation: The line is busy.
System action: XHLL clears the XLMA queue and processing
System action: A SERRC macro is issued and the program is is continued.
exited.
User response: None.
User response: None.
F01301
F0128F
Program: Displayed on the console and in the dump
Program: Displayed on the console and in the dump
Error Message: None.
Error Message: None.
Explanation: The file address compute program (FACE) was
Explanation: There was a file address compute program unable to compute the XLMA file address with the ordinal
(FACE) error while obtaining the prime XTCB file address. number provided.
System action: A SERRC macro is issued. System action: An error indication is set and control is
returned to user program through the BACKC macro.
User response: None.
User response: None.
F01302 F0136F
Program: Displayed on the console and in the dump Program: Displayed on the console and in the dump
Explanation: The TPF system was unable to retrieve the Program: Displayed on the console and in the dump
output message. Error Message: WARNING — PURGE REQUIRED.
System action: The XLMA queue is cleared and processing is Explanation: The last terminal annex table (XTAT) record was
continued. used. More records may be necessary.
User response: None. System action: Processing is ended normally.
Explanation: The TPF system is unable to retrieve the output Program: Displayed on the console and in the dump
message. Error Message: None.
System action: An error indication is set and the XLMA Explanation: There was a FILNC macro error while filing the
queue is cleared. Control is returned to the user program Output Log Directory (XOLD) record.
through the BACKC macro.
System action: Processing is continued.
User response: Review the system error dump to determine
the cause of the error and to correct it. User response: Have your system programmer review the
system error dump to determine the cause of the error and to
correct it.
F0132F
Program: Displayed on the console and in the dump F013AF
Error Message: None. Program: Displayed on the console and in the dump
Explanation: There was a file address compute program Error Message: None.
(FACE) error retrieving the file address of the log record.
Explanation: There was a file address compute program
System action: Error correction processing takes place. (FACE) error while retrieving the file address of the terminal
User response: Have your system programmer review the annex table (XTAT) record.
system error dump to determine the cause of the error and to System action: Processing is continued.
correct it.
User response: Have your system programmer review the
system error dump to determine the cause of the error and to
F0134F correct it.
Program: Displayed on the console and in the dump
Explanation: There was a file address compute program Program: Displayed on the console and in the dump
(FACE) error while retrieving the file address of the terminal Error Message: None.
annex table (XTAT) record.
Explanation: There was a FIWHC macro error in the
System action: Processing is continued. Communication Message Format (XMSG) record while
User response: Have your system programmer review the releasing the chain during a crash purge.
system error dump to determine the cause of the error and to System action: Processing is continued.
correct it.
User response: Have your system programmer review the
280 TPF Messages (System Error, Offline, and Program Status Word)
F013B1 • F0194E
F0192F
F013B3
Program: Displayed on the console and in the dump
Program: Displayed on the console and in the dump
Error Message: None.
Error Message: None.
Explanation: There was a file address compute program
Explanation: There was a FIWHC macro error in the Input (FACE) error on the Input Log Directory (XILD) ID/ordinal
Log Directory (XILD) record. The record was being obtained number while trying to update the XILD record index in
to clear a file address, which was released by using the XTRT.
Output Log Directory (XOLD) record message address.
System action: The TPF system moves to the next XTRT
System action: Processing is continued. entry.
User response: Have your system programmer review the User response: None.
system error dump to determine the cause of the error and
correct it.
F0193E
Program: Displayed on the console and in the dump Error Message: TON xxxx
User response: Have your system programmer review the System action: XILD record index is set to zero in XTRT.
system error dump to determine the cause of the error and User response: None.
correct it.
F0194D
F0190F
Program: Displayed on the console and in the dump
Program: Displayed on the console and in the dump
Error Message: XTQC GLOBALS WERE NOT LOADED
Error Message: None.
Explanation: During cycle up it was determined that the base
Explanation: There was a file address compute program address of the XTQC global was zero.
(FACE) error on the Output Log Directory (XOLD) ID/ordinal
number while trying to update the XOLD record index in System action: The TPF system IPLed again and brought
XTRT. back to 1052 state.
System action: The TPF system moves to the next XTRT User response: Load a new pilot tape with the XTQC global
entry. area.
(FACE) error on the XTIQ ID/ordinal number while trying to System action: The tape print is closed.
determine whether the message in the queue was intercepted.
User response: Start the job again after the TPF system
System action: The TPF system assumes that the message stabilizes.
was not intercepted.
User response: None. F019AF
Program: Displayed on the console and in the dump
F0194F
Error Message: None.
Program: Displayed on the console and in the dump
Explanation: There was a file address compute program
Error Message: None. (FACE) error on the XICT record while trying to reset the
XICT entries.
Explanation: There was a file address compute program
(FACE) error on the XTCB ID/ordinal number while trying to System action: The TPF system moves to the next XICT
reestablish the ordinal number. record.
System action: The TPF system moves to the next sequential User response: None.
XTCB.
282 TPF Messages (System Error, Offline, and Program Status Word)
F01A0F • F01A8F
F01A0F F01A6D
Program: Displayed on the console and in the dump Program: Displayed on the console and in the dump
User response: None. User response: Review the system error dump to determine
the cause of the error and to correct it.
F01A2E
F01A6E
Program: Displayed on the console and in the dump
Program: Displayed on the console and in the dump
Error Message: None.
Error Message: None.
Explanation: There was a file address compute program
(FACE) error on the XRPT while trying to set up the @XJRPT Explanation: There was an XLMA, terminal annex table
global. (XTAT), or XSAT FACT error found while trying to copy the
XLMA, XSAT, or XTAT records onto the XCPY records.
System action: XRPT is by passed.
System action: The job is ended on the records.
User response: None.
User response: Review the system error dump to determine
the cause of the error and to correct it.
F01A2F
Explanation: There was a FINWC macro error on the XRPQ Program: Displayed on the console and in the dump
while trying to requeue the process queue. Error Message: xxxx XLMA RCDS COPIED
System action: XRPQ is by passed. Explanation: The file address compute program (FACE)
User response: None. found an error on the XCPY records while trying to copy the
XLMA, terminal annex table (XTAT), or XSAT records.
Program: Displayed on the console and in the dump User response: Review the system error dump to determine
the cause of the error and to correct it.
Error Message: None.
Explanation: There was a file address compute program F01A8F
(FACE) error on the XRPT while trying to set up the @XIRPT
global. Program: Displayed on the console and in the dump
User response: None. Explanation: There was an error from the file address
compute program (FACE) when trying to calculate the XTCB
prime address.
System action: A SERRC macro is issued and a zero line
284 TPF Messages (System Error, Offline, and Program Status Word)
Offline Messages
2. Build the C load module again.
ALDR 3. See your IBM service representative if the problem is not
corrected; you may have a hardware error.
ALDR0401T ERROR DURING BLDL FOR LOADMOD
Explanation: An error occurred when the offline general file ALDR0903E BAD RECORD IN PROGRAM LOAD
loader (ALDR) attempted to call the BLDL service for the MODULE prognamecode
LOADMOD data definition name.
Where:
System action: ALDR processing ends abnormally.
progname
User response: Do the following: The program name.
1. Determine the cause of the problem associated with the code
LOADMOD file. The version code.
2. Correct the problem.
Explanation: ALDR attempted to load a C load module.
While processing the C load module, an incorrect or
See TPF System Installation Support Reference for more unexpected record occurred.
information about ALDR.
System action: The program is not loaded and processing
continues.
ALDR0901E PROGRAM LOAD MODULE prognamecode
LARGER THAN CLMSIZE User response: Do the following:
1. Determine why the C load module was not created
Where:
correctly.
progname 2. Build the C load module again.
The program name.
code ALDR0904E STARTUP CODE MISSING FROM
The version code. PROGRAM prognamecode
Explanation: ALDR attempted to load a C load module but Where:
not enough memory was allocated to process the C load
module. progname
The program name.
System action: The program is not loaded and processing
continues. code
The version code.
User response: Do one of the following:
v Increase the value of the CLMSIZE parameter input to Explanation: ALDR attempted to load a C load module, but
TPFLDR. the C load module did not contain the required startup code
(CSTRTD or CSTRTL).
v Split the load module into smaller pieces.
System action: The C load module is not loaded and
processing continues.
ALDR0902E PROGRAM LOAD MODULE prognamecode
I/O ERROR User response: Ensure that the ISO-C program or library was
built correctly. One of the startup routines (CSTRTD or
Where: CSTRTL) was not linked into the C load module correctly.
progname
The program name. ALDR0905E DLM ENTRY POINT NOT FOUND IN
code PROGRAM prognamecode
The version code. Where:
Explanation: ALDR attempted to load a C load module. progname
While attempting to read the C load module into memory, an The program name.
I/O error occurred.
code
System action: The program is not loaded and processing The version code.
continues.
Explanation: ALDR attempted to load a C load module. The
User response: Do the following: C load module contained the DLM startup code CSTRTD but
1. Determine why the C load module was not created no entry point with the 4-character program name was found.
correctly. A DLM must contain a function with the 4-character name of
the program.
Explanation: You ran the offline general file loader (ALDR) BSN003 DUPLICATE CPUID/SYMLN/STANO WAS
and specified a C load module that contains no link map data. ENCOUNTERED
System action: The C load module is loaded with no link Severity: 5
map data.
Explanation: A BSNCT statement containing duplicate
User response: If you want a link map for this C load CPUID, SYMLN, and STANO information that was defined by
module, do the following: a previous BSNCT statement was read.
1. Rerun the C load module build tool (CBLD). System action: None.
2. Rerun the offline general file loader (ALDR) to pick up the
updated version of the C load module. User response: Do the following:
1. Correct the BSNCT macro that is in error.
See TPF Application Programming for information about the C 2. Rerun SIP stage I.
load module build tool (CBLD) and TPF System Installation
Support Reference for information about the offline general file
loader (ALDR). BSN004 MORE THAN 16 ENTRIES FOR ONE
STATION
Severity: 5
BBS0–BSN0
Explanation: Only a maximum of 16 entries for one station
are allowed.
BBS001 MAXIMUM NUMBER OF BBSAT ENTRIES
EXCEEDED System action: None.
286 TPF Messages (System Error, Offline, and Program Status Word)
CBLD0000I • CBLD0412I
2. Rerun SIP stage I. line of input in the build script where the version code is not
valid. The version code must be 2 alphanumeric characters.
option User response: Check the build script. If the line in error
The text of the unrecognized runtime option. cannot be ignored, then correct the build script and run the C
load module build tool again.
Explanation: The C load module build tool runtime option
list includes text beyond the expected type and module.
CBLD0411I ONE OR MORE OBJECT FILE NAMES ARE
System action: The unrecognized option text is ignored by
1 OR 2 CHARACTERS LONG. BLANKS
the C load module build tool.
USED FOR VERSION CODE.
User response: Correct the C load module build tool runtime
Explanation: The C load module build tool (CBLD) detected
option list so that it does not include extraneous information.
that one or more object files included in a build script have
names that are only 1 or 2 characters long. Blanks are used for
CBLD0401W linenumber: THERE IS ONLY ONE VALID the 2-character version code.
RUN-TIME OPTION - DEFAULTING TO System action: None.
JCL
User response: None.
Where:
See TPF Application Programming for more information about
linenumber CBLD.
The number of the line within the build script that
contains the error.
CBLD0412I ONE OR MORE OBJECT FILE NAMES ARE
Explanation: The C load module build tool runtime option
3 TO 5 CHARACTERS LONG. LAST 2
list includes an incorrect option.
CHARACTERS USED FOR VERSION
System action: The default value for the runtime option is CODE.
assumed by the C load module build tool.
Explanation: The C load module build tool (CBLD) detected
User response: Correct the C load module build tool runtime that one or more object files included in a build script have
option list. names that are 3 to 5 characters long. The last 2 characters in
the object file name are used as the 2-character version code.
See TPF Application Programming for more information about CBLD1208T UNABLE TO DETERMINE LOAD MODULE
CBLD. TYPE
Explanation: The first non-comment line in the build script
CBLD0804E linenumber: OBJECT FILE NAME EXCEEDS 8 does not specify a valid C load module type (DLM, DLMvv,
CHARACTERS. LIBRARY, or LIBRARYvv, where vv is the version code).
Where: System action: The C load module build tool stops running.
linenumber User response: Do the following:
The number of the line in the build script that contains
1. Check the format of the build script.
the error.
2. Correct any errors.
Explanation: The C load module build tool detected that the
3. Run the C load module build tool again.
object file included in a build script has a name that is more
than 8 characters long.
CBLD1211T WRITE ERROR ON STDOUT
System action: The input line containing the object file name
in error is ignored and processing continues. Explanation: An error occurred when attempting to write to
STDOUT. Additional diagnostics may precede this message.
User response: Do the following:
1. Check the format of the build script. System action: The C load module build tool stops running.
2. Correct any errors. User response: Determine why SYSOUT could not be
3. Run CBLD again. written.
See TPF Application Programming for more information about CBLD1222T line: EITHER TYPE OR NAME NOT
CBLD. SPECIFIED
Where:
CBLD0805E IMPORTDS STATEMENT SHOULD
PRECEDE OBJECT line The input line containing the error.
Explanation: The C load module build tool (CBLD) detected Explanation: The first non-comment line in the build script
that an @IMPORTDS statement was out of sequence in the does not specify the C load module name, or does not specify
build script. The @IMPORTDS statement must precede all both the name and type (either DLM or LIBRARY).
included object file names in the dynamic load module (DLM),
System action: The C load module build tool stops running.
which is a DLL application, or in the dynamic link library
(DLL). User response: Do the following:
System action: The C load module build tool (CBLD) stops 1. Check the format of the build script.
288 TPF Messages (System Error, Offline, and Program Status Word)
CCP001 • CHQI0005W
2. Correct any errors. statement is located at the line number referenced in the
3. Run the C load module build tool again. message.
System action: The MODE value is set to NULL.
CCP001 xxxx RESTART LEVEL LESS THAN User response: Do one of the following:
SHUTDOWN LEVEL - DEFAULTS TAKEN
v Code the MODE parameter on the ADD statement.
Where: v Make sure any transaction program that references this
entry sets a valid value for the mode name and the mode
xxxx
name length characteristics before allocating a conversation.
The parameter for the CCPPOL macro.
CHQI0002W ADD STATEMENT BEGINNING IN LINE See TPF ACF/SNA Data Communications Reference for more
linenumber ENDS WITHOUT SPECIFYING information about TPF Advanced Program-to-Program
MODE Communications (TPF/APPC).
Where:
CHQI0005W MODE PARAMETER IS IGNORED IN
linenumber REMOVE STATEMENT
The line number.
Explanation: A MODE parameter is specified in a REMOVE
Explanation: An ADD statement was completed (by coding statement.
another verb or ending the input file) without specifying the
MODE parameter. The ADD verb that begins the flagged System action: The MODE parameter is ignored.
User response: None.
User response: Code the NAME parameter on the ADD CHQI0013E INVALID VERB
statement.
Explanation: A verb other than ADD, DESCR, LOAD, or
See TPF ACF/SNA Data Communications Reference for more REMOVE is coded.
information about TPF Advanced Program-to-Program
Communications (TPF/APPC). System action: None.
Explanation: A keyword parameter other than SS is coded as See TPF ACF/SNA Data Communications Reference for more
part of a LOAD statement. information about TPF Advanced Program-to-Program
Communications (TPF/APPC).
System action: None.
User response: Recode the LOAD statement with only the SS CHQI0015E LOAD STATEMENT BEGINNING IN LINE
parameter. linenumber ENDS WITHOUT SPECIFYING
SS
See TPF ACF/SNA Data Communications Reference for more
information about TPF Advanced Program-to-Program Where:
Communications (TPF/APPC).
linenumber
The line number.
290 TPF Messages (System Error, Offline, and Program Status Word)
CHQI0016E • CHQI0022E
User response: Do the following: Explanation: A value of the form netid is coded as an LU
parameter value but there is no value for the LU name.
1. Check the statement.
2. Remove the extraneous LU parameter. System action: None.
See TPF ACF/SNA Data Communications Reference for more User response: Do the following:
information about TPF Advanced Program-to-Program 1. Check the statement.
Communications (TPF/APPC).
2. Remove the extraneous MODE parameter.
See TPF ACF/SNA Data Communications Reference for more information about TPF Advanced Program-to-Program
information about TPF Advanced Program-to-Program Communications (TPF/APPC).
Communications (TPF/APPC).
CHQI0026E NETWORK ID CONTAINS INVALID See TPF ACF/SNA Data Communications Reference for more
CHARACTER information about TPF Advanced Program-to-Program
Explanation: The network ID portion of an LU parameter Communications (TPF/APPC).
value contains a character that is not an uppercase letter (A
through Z) or a numeral (0 through 9). CHQI0030E NO VERB WAS SPECIFIED FOR THIS
System action: None. PARAMETER
User response: Recode the LU parameter value. Both the Explanation: A keyword parameter is coded without a
network ID (if any) and the logical unit (LU) name must be preceding verb; for example, at the beginning of the file,
from 1 to 8 characters long, must contain only capital letters following a DESCR statement or following a verb that is not
(A through Z), numerals (0 through 9), and must begin with a valid.
capital letter. System action: None.
See TPF ACF/SNA Data Communications Reference for more User response: None.
292 TPF Messages (System Error, Offline, and Program Status Word)
CHQI0031E • CHQI0037E
See TPF ACF/SNA Data Communications Reference for more System action: None.
information about TPF Advanced Program-to-Program
User response: Recode the SS parameter. The value must be
Communications (TPF/APPC).
from one to four characters long.
See TPF ACF/SNA Data Communications Reference for more
CHQI0031E PARAMETER KEYWORD FOLLOWED BY
information about TPF Advanced Program-to-Program
PARAMETER KEYWORD
Communications (TPF/APPC).
Explanation: A parameter keyword immediately follows
another parameter keyword.
CHQI0035E SYMBOLIC DESTINATION NAME IS
System action: None. LONGER THAN 8 CHARACTERS
User response: Do the following: Explanation: A NAME parameter value (that is, the symbolic
1. Check the statement. destination name) is more than eight characters long.
2. Correct the syntax. A parameter keyword must be followed System action: None.
by a dash or an equal sign and then followed by the
User response: Recode the NAME parameter. The value must
appropriate parameter value.
be from one to eight characters long.
See TPF ACF/SNA Data Communications Reference for more See TPF ACF/SNA Data Communications Reference for more
information about TPF Advanced Program-to-Program information about TPF Advanced Program-to-Program
Communications (TPF/APPC). Communications (TPF/APPC).
Explanation: An SS parameter value is more than four v If a dollar sign is actually desired in the transaction
characters long. program name, two consecutive dollar signs ($$) must be
used for each dollar sign needed. For example, T-X$$Y$$Z
CHQI0039E TP NAME CONTAINS HEX SUBSTRING CHQI0043E INPUT DATA SET OPEN FAILURE
WITH ODD NUMBER OF DIGITS
Explanation: The user input data set could not be opened.
Explanation: A TP parameter value contains a hexadecimal
substring (delimited by dollar signs) where the number of System action: Summary information is written to the listing
hexadecimal digit characters is not a multiple of two. file and processing is ended immediately with return code 12.
User response: Recode the TP parameter. See the user See TPF ACF/SNA Data Communications Reference for more
response for the CHQI0037E message for a list of the syntax information about TPF Advanced Program-to-Program
rules for this parameter. Communications (TPF/APPC).
294 TPF Messages (System Error, Offline, and Program Status Word)
CHQI0046E • CON009
Severity: 5
CON004 PROCESSOR SERIAL NUMBER (xxxx) WAS
USED BY BOTH PROCy AND PROCz. Explanation: The serial number specified is not a
hexadecimal value. Because this parameter must correspond to
Where: bits 12 through 31 of the results of a STIDP instruction, the
xxxx value specified in the SIP stage I deck must be incorrect.
The serial number of the processor. System action: None.
y The parameter in error. User response: Do the following:
z The parameter in error. 1. Recode the serial number with the proper hexadecimal
value.
Severity: 5
2. Rerun SIP stage I.
Explanation: Both PROCy and PROCz defined the same
processor serial number, as referenced in the message. A
loosely coupled environment requires that the concatenation of CON008 THE SERIAL NUMBER SPECIFIED FOR
the serial and model number be unique. PROCx IS LONGER THAN 5
HEXADECIMAL DIGITS.
System action: None.
Where:
User response: Do the following:
x The parameter that is in error.
1. Correct the duplicate identification number (the processor
serial number). Severity: 5
2. Rerun SIP stage I. Explanation: IBM processors use exactly six digits for the
processor serial number. Since the TPF system forces the
CON005 AT LEAST ONE (PROCX=) MUST BE high-order digit to zero, only the remaining five need be
CODED. coded.
Explanation: When more than one ID is specified on the User response: Do the following:
SYSID parameter, system initialization program (SIP) assumes 1. Recode the serial number with no more than five digits.
that a loosely coupled environment exists. Loosely coupled 2. Rerun SIP stage I.
environments required that at least one of the PROCx
parameters is coded.
If fewer that five digits are coded, then the system
System action: None. initialization program (SIP) right justifies the serial number
and writes zeros into the unused high-ordered digits.
User response: Do one of the following:
v If a non-loosely coupled system is desired, then reduce the
number of SYSID arguments to one. CON009 THE MODEL NUMBER SPECIFIED FOR
PROCx DOES NOT CONTAIN FOUR
v If a loosely coupled system is needed, then code one or CHARACTERS.
more of the PROCx parameters.
Where:
Then, after making the appropriate changes, rerun SIP stage I. x The parameter that is in error.
Severity: 5
CON006 THE NUMBER OF SUBPARAMETERS
SPECIFIED FOR PROCx EXCEEDS TEN. Explanation: IBM hardware limits model numbers to four
digits.
Severity: 0
System action: None.
Explanation: Only the first 10 subparameters have meaning.
The first subparameter is the processor serial number, the User response: Do the following:
1. Recode the model number with exactly four characters. Explanation: The addresses of the prime CRAS consoles
2. Rerun SIP stage I. referenced in the message cannot be the same as the address
specified for the prime CRAS console.
System action: None.
CON010 PROCx DEFINED SSA y WHICH HAS
ALREADY BEEN USED. User response:
Severity: 5 1. Correct one or both of the addresses.
2. Rerun SIP stage I.
Where:
x The particular PROC parameter that is in error.
CRA002 TERMINAL ADDRESS xxxx NOT VALID
y The duplicated SSA value. FOR yyyy
Explanation: Each of the PROC parameters requires a unique Where:
set of SSA values.
xxxx
System action: None. The terminal address that is not valid for the device type.
User response: Do the following: yyyy
1. Recode the PROCx parameter with a unique set of SSA The device type.
values. Severity: 5
2. Rerun SIP stage I.
Explanation: The terminal address referenced in the message
is not valid for the device type referenced in the message.
CON011 PROCx DEFINED y, WHICH IS OUTSIDE
THE VALID SSA RANGE. System action: None.
Severity: 5 Severity: 0
Explanation: The sum of the values coded for APSIZ24 and Explanation: The receive-only (RO) computer room agent set
APSIZ31 is less than 1000. (CRAS) console is specified as a 1977, which is not a
receive-only console.
System action: None.
System action: None.
User response: Do the following:
User response: Do the following:
1. Change the values coded for APSIZ24 or APSIZ31 so that
their sum totals 1000 or more. 1. Correct the operand if it is not valid.
2. Run SIP stage I again. 2. Rerun SIP stage I.
CRA001 PRIME CRAS ADDRESS EQUALS xxxx CRA005 xxxx OPERAND IGNORED –VALID ONLY
CRAS ADDRESS IF yyyy=NO
Where: Where:
xxxx xxxx
The address of the prime computer room agent set The keyword that was ignored.
(CRAS) console. yyyy
Severity: 5 The keyword that must be coded for xxxx to be valid.
296 TPF Messages (System Error, Offline, and Program Status Word)
DAT001 • DB2P0007E
Severity: 0
DB2P0003E ERROR — INVALID PARAMETER
Explanation: The keyword referenced in the message is DEFINITION
ignored because it is not valid. This keyword should only be
Explanation: An error occurred because you specified a
coded when yyyy=NO is specified.
parameter that is not valid for the TPF DATABASE 2 (DB2)
System action: None. postprocessor keywords. Valid parameters are:
v HOST(C)
User response: Do one of the following: v HOST (ISOC) PKGISOL (CS)
v If the keyword referenced in the message (xxxx) is required, v HOST (ISOC) PKGISOL (RR).
you must code yyyy=NO. Then, rerun SIP stage I.
System action: The postprocessor returns the failure status
v If the keyword referenced in the message (xxxx) is not and posts an error message to the message file.
required, no further action is required.
User response: Specify the correct parameters for the TPF
DB2 postprocessor keywords.
DAT0–DYO0 See TPF Application Requester User's Guide for more
information about the valid parameters for the TPF DB2
DAT001 MORE THAN ONE DATACO MACRO WAS postprocessor keywords.
CODED
Severity: 5 DB2P0004W WARNING — UNABLE TO FIND KEY:
CHAR SQLTEMP[19]
Explanation: None.
Explanation: An error occurred because the expected key
System action: None. was not found.
User response: Do the following: System action: The postprocessor returns the success status
1. Remove all but one DATACO macro. and posts a warning message to the message file.
2. Rerun SIP stage I. User response: Add the key to the source file.
User response: None. Explanation: An error occurred because the expected key
was not found.
See TPF Application Requester User's Guide for more
information. System action: The postprocessor returns the success status
and posts a warning message to the message file.
DB2P0001E UNABLE TO ACCESS INPUT FILE User response: Add the key to the source file.
Explanation: An error occurred because the file containing See TPF Application Requester User's Guide for more
the modified source file or the database resource module information.
(DBRM) could not be opened.
System action: The postprocessor returns failure status and DB2P0006E ERROR — DUPLICATE KEYS FOUND:
posts an error message to the message file. #PRAGMA LINKAGE
User response: Have your system programmer determine the Explanation: An error occurred because two or more
cause of the error and correct it. occurrences of the same key were found.
See TPF Application Requester User's Guide for more System action: The postprocessor returns the failure status
information. and posts an error message to the message file.
User response: Remove the duplicate keys from the source
DB2P0002E UNABLE TO ACCESS OUTPUT FILE file.
Explanation: An error occurred because the file could not be See TPF Application Requester User's Guide for more
opened for the postprocessor output. information.
User response: Remove the duplicate keys from the source User response: Add the missing key to the source file being
file. post processed.
Note: If 3 parameters are specified for HOST(C), the third System action: None.
parameter is ignored. User response: Do the following:
System action: The postprocessor returns the failure status 1. Make the necessary corrections.
and posts an error message to the message file. 2. Rerun SIP stage I.
User response: Specify the correct number of parameters to
the postprocessor. DDC002 HYPHEN MISSING IN SUBOPERAND xxxx
See TPF Application Requester User's Guide for more Where:
information about the valid parameters for the TPF DB2
postprocessor keywords. xxxx
The suboperand value.
System action: The postprocessor returns failure status and User response: Do the following:
posts an error message to the message file. 1. Specify the required operands.
User response: Ensure the database request module file is 2. Rerun SIP stage I.
specified correctly.
DDC007 xxxx/yyyy MODS OVERLAP
DB2P0053W KEY NOT FOUND: #pragma linkage Where:
(DSHNLI,OS)
xxxx
Where: Operand 1.
#pragma linkage yyyy
#pragma key number 1 Operand 2.
Explanation: An error occurred because the expected key Severity: 5
was not found.
Explanation: The modules between operand 1 and operand
System action: The postprocessor returns the success status 2, as referenced in the message, overlap.
and posts a warning message to the message file.
System action: None.
298 TPF Messages (System Error, Offline, and Program Status Word)
DDC008 • DYO02001E
User response: Do the following: 1. Review the OPMTBL input for this pool section to
1. Make the necessary corrections. determine the cause of the error.
DDC008 OPERAND xxxx CONTAINS MORE THAN DYO01001W MAXIMUM RECORD ID TABLE SIZE TO
yyyy SUB-OPERANDS BE USED = entries
Where: Where:
xxxx entries
The operand. The current maximum number of entries that DYOPM
will allocate for the record ID hash table.
yyyy
The valid number of suboperands. Explanation: This message indicates that, even though you
tried to specify a larger number of entries for DYOPM to
Severity: 5 allocate for the record ID hash table, this is the number of
entries that DYOPM actually used.
Explanation: The operand referenced in the message contains
more than the valid number of suboperands. System action: None.
System action: None. User response: None.
User response: Do the following: See TPF Database Reference for more information about valid
1. Make the necessary corrections. parameters for offline pool maintenance.
2. Rerun SIP stage I.
DYO02000E directories DIRECTORIES WERE SPECIFIED.
ONLY 16,777,216 ARE ALLOWED.
DDC011 xxxx MOD RANGE yyyy OVERLAP
Where:
Where:
directories
xxxx
The number of directories (in decimal format).
The module range.
Explanation: The OPMTBL input specified more than
yyyy
16 777 216 directories; however, there is an addressing limit of
The operand.
16 777 216 directories in the online system.
Severity: 5
System action: The DYOPM job ends with an error return
Explanation: The module range for the operand referenced in code.
the message overlaps another range for the same operand.
User response: Do the following:
System action: None. 1. Review the OPMTBL input for this pool section to
User response: Do the following: determine the cause of the error.
DYO01000W directories DIRECTORIES WERE SPECIFIED DYO02001E RCP RUN NUMBER: value1 DOES NOT
MATCH value2 – RUN ABORTED
FOR SHORT TERM POOL SECTION
identifier. ONLY THE FIRST 65,536 WILL BE Where:
USABLE ONLINE.
value1
Where: The time stamp value saved in the first RCP tape
mounted.
directories
The number of directories (in decimal format). value2
identifier The time stamp value saved in another RCP tape.
The pool section identifier (for example, SSTA). Explanation: There is a mismatch in the time stamps between
Explanation: The FACE table (FCTB) input specified more the RCP tapes. These RCP tapes are not from the same recoup
run.
than 65 536 directories for this short-term pool section;
however, there is an addressing limit of 65 536 directories for System action: The DYOPM job ends with an error return
each short-term pool section in the online system. code.
System action: The DYOPM job runs to completion but only User response: Do the following:
the first 65 536 directories in this pool section are usable
1. Mount the correct RCP tapes with the same time stamp.
online.
2. Run the DYOPM job again.
User response: Do the following:
function
DYO02002E END OF RCP DATA NOT FOUND
The function that issued the error.
Explanation: The last routing control parameter (RCP) tape is
Explanation: An attempt was made to allocate memory
missing.
dynamically and it failed.
System action: The DYOPM job ends with an error return
System action: Processing is ended immediately.
code.
User response: Increase the REGION size in which the job is
User response: Run the DYOPM job again ensuring all RCP
being run.
tapes are used.
See TPF System Generation for more information about the file
address compute program (FACE) table generation.
DYO02003E INVALID NUMBER OF ENTRIES FOR
RECORD ID TABLE: string — RUN
ABORTED FCTB0002T filen(function) CANNOT OPEN DD:name
Where: Where:
string filename
A portion of the string that DYOPM encountered where a The file name that contains the function.
numerical parameter was expected.
function
Explanation: DYOPM found a non-numerical value coded The function that issued the error.
where it was expecting to find the number of entries to
allocate for its record ID hash table. name
Data definition name of the data set and member that
System action: None. cannot be opened.
User response: Do one of the following: Explanation: An attempt was made to open the data set and
v To have DYOPM use the default number of entries for its member referenced in the message in the JCL. The open failed.
record ID hash table, omit this parameter from the JCL. System action: Processing is ended immediately.
v To have DYOPM use a larger record ID hash table, specify a
numerical value on the JCL and submit the job again. User response: Check that the data definition name exists in
the JCL.
See TPF Database Reference for more information about valid See TPF System Generation for more information about the file
parameters for offline pool maintenance. address compute program (FACE) table generation.
Explanation: Any parameter specified after the DYOPM Explanation: The end of the input file (Stage I deck) was
intervention parameter must be preceded by a valid delimiter. reached while parsing a statement.
System action: None. System action: Validation of the input is continued but no
output is produced.
User response: Do the following:
User response: Do the following:
1. Correct the parameter string coded for DYOPM.
1. Verify that the input file (Stage I deck) is complete.
2. Submit the job again.
2. Verify that the input file can be assembled.
See TPF Database Reference for more information about valid
parameters for offline pool maintenance. See TPF System Generation for more information about the file
address compute program (FACE) table generation.
300 TPF Messages (System Error, Offline, and Program Status Word)
FCTB0005W • FCTB0009W
Where: See TPF System Generation for more information about the file
address compute program (FACE) table generation.
filename
The file name that contains the function.
FCTB0008E filename(function) UNEXPECTED END OF
function FILE.
The function that issued the error.
Where:
statement
The name of the duplicate statement. filename
The file name that contains the function.
Explanation: The statement being parsed was already
encountered in the input file (Stage I deck). It should only be function
coded once. The function that issued the error.
System action: Validation is continued and output is Explanation: The report generator unexpectedly encountered
produced, unless the STOPWARNING parameter is passed to the end of the input file (Stage I deck).
the file address compute program (FACE) table generator. System action: Validation of the input is continued but no
User response: A macro or statement was coded twice. Only output is produced.
the first one is processed and the remaining ones are ignored. User response: See your IBM service representative for more
Ensure that the first macro or statement is the one desired. information because an internal software error occurred.
Duplicates should be removed to avoid confusion.
See TPF System Generation for more information about the file
See TPF System Generation for more information about the file address compute program (FACE) table generation.
address compute program (FACE) table generation.
See TPF System Generation for more information about the file the file address compute program (FACE) table generator.
address compute program (FACE) table generation.
User response: Change the value coded for the parameter.
See TPF System Generation for more information about the file
FCTB0010E filename(function) UNBALANCED
address compute program (FACE) table generation.
PARENTHESIS.
Where:
FCTB0013E filename(function) INVALID PARAMETER
filename FOUND ON STATEMENT.
The file name that contains the function.
Where:
function
filename
The function that issued error.
The file name that contains the function.
Explanation: An equal number of open and close parentheses
function
were not found.
The function that issued the error.
System action: Validation of the input is continued but no
Explanation: The parser did not expect a parameter on the
output is produced.
statement.
User response: Code the correct number of open and close
System action: Validation of the input is continued but no
parentheses.
output is produced.
See TPF System Generation for more information about the file
User response: Correct the syntax of the statement.
address compute program (FACE) table generation.
See TPF System Generation for more information about the file
address compute program (FACE) table generation.
FCTB0011E filename(function) THE error PARAMETER IS
INVALID.
FCTB0014E filename(function) THE FTI SIZE FOR UFT
Where:
uftnumber IS TOO LARGE TO BE USED ON
filename THE UFTI4 PARAMETER
The file name that contains the function.
Where:
function
filename
The function that issued the error.
The file name that contains the function.
error
function
The parameter name in error.
The function that issued the error.
Explanation: The parameter referenced in the message was
uftnumber
coded with data that is not valid.
The universal format type (UFT) number.
System action: Validation of the input is continued but no
Explanation: The number of bits coded for the format type
output is produced.
indicator (FTI) size for the UFT indicated create an FTI size
User response: Code the parameter correctly. which is too large for a file address reference format 4 (FARF4)
address.
See TPF System Generation for more information about the file
address compute program (FACE) table generation. System action: Validation of the input is continued but no
output is produced.
FCTB0012W filename(function) DUPLICATE parameter value, User response: A different UFT should be used on the UFTI4
IGNORED. parameter.
Where: See TPF System Generation for more information about the file
address compute program (FACE) table generation.
filename
The file name that contains the function.
FCTB0015E filename(function) A RIGHT PARENTHESIS
function MUST BE FOLLOWED BY A COMMA, A
The function that issued the error. SPACE, A RIGHT PARENTHESIS OR AN
parameter END-OF-STATEMENT.
The duplicate parameter. Where:
value filename
The value on the duplicate parameter. The file name that contains the function.
Explanation: The parameter specified in the message was function
already coded with the value specified. Duplicate values are The function that issued the error.
not allowed.
Explanation: The parser detected an error in the syntax of the
System action: Validation is continued and output is statement.
produced, unless the STOPWARNING parameter is passed to
302 TPF Messages (System Error, Offline, and Program Status Word)
FCTB0016W • FCTB0019W
function
FCTB0016W filename(function) parameter PARAMETER HAS
The function issuing the error.
BEEN TRUNCATED TO value
parameter
Where:
The parameter that has information coded that is not
filename valid.
The file name that contains the function.
value
function The value assumed for this parameter.
The function that issued the error.
Explanation: The value coded for the parameter referenced in
parameter the message is not valid. The default value referenced in the
The parameter that has a value that will be truncated. message was used.
Where: function
The function issuing the error.
filename
The file name that contains the function. parameter
The parameter that has information coded that is not
function valid.
The function that issued the error.
value
value1 Value assumed for this parameter.
The dispense mode value coded on the MODE parameter.
Explanation: Data coded on the parameter referenced in the
value2 message is not valid. The TPF system continues processing as
The migration stage value coded on the STAGE if the correct data was coded.
parameter.
System action: Validation is continued and output is
Explanation: The value coded on the parameter referenced in produced, unless the STOPWARNING parameter is passed to
the message parameter does not make sense for the migration the file address compute program (FACE) table generator.
stage referenced in the message.
User response: Do one of the following:
System action: Validation of the input is continued but no
v If the assumption is correct, there is no action for you to
output is produced.
take.
User response: Update the STAGE or MODE parameter, as v If the assumption is not correct, change the value coded on
necessary, on the UFTFTI statement. the STOPWARNING parameter.
See TPF System Generation for more information about the file
address compute program (FACE) table generation. See TPF System Generation for more information about the file
address compute program (FACE) table generation.
Where: Where:
filename filename
The file name that contains the function. The file name that contains the function.
function function
The function that issued the error. The function that issued the error.
parameter device
The parameter that has information coded that is not The device that did not have the PERM parameter coded.
valid.
Explanation: The DEVICE parameter was coded for the
value device referenced in the message but the PERM parameter for
The value assumed for this parameter. that device was not coded or its value was 0.
Explanation: Data coded on the parameter referenced in the System action: Validation of the input is continued but no
message is not valid. The TPF system continues processing as output is produced.
if the correct data was coded.
User response: Do one of the following:
System action: Validation is continued and output is v You must code a positive nonzero number on the PERM
produced, unless the STOPWARNING parameter is passed to parameter for the device referenced in the message.
the file address compute program (FACE) table generator.
v Delete the DEVICE parameter if this device type is not in
User response: Do one of the following: use.
v If the assumption is correct, there is no action for you to
take. See TPF System Generation for more information about the file
v If the assumption is not correct, change the value coded on address compute program (FACE) table generation.
the STOPWARNING parameter.
FCTB0023E filename(function) TOTAL NUMBER OF
See TPF System Generation for more information about the file MODS MUST BE LESS THAN OR EQUAL
address compute program (FACE) table generation. TO number
Where:
FCTB0021W filename(function) PERMx MUST BE EVEN IN
A FULLY DUPLICATED SYSTEM. filename
PERMx=value ASSUMED. The file name that contains the function.
Where: function
The function that issued the error.
filename
The file name thta contains the function. number
The maximum number of modules allowed to be coded.
function
The function that issued the error. Explanation: The total number of DASD modules coded
must not exceed the TPF-defined limit referenced in the
value message.
The value assumed for PERM parameter.
System action: Validation of the input is continued but no
Explanation: In a fully duplicated TPF system, the value output is produced.
coded on the PERM parameter is divided by 2 to calculate the
total number of prime modules. If the number is not even, a User response: Reduce the values coded for the PERM or
fractional module is left over so the TPF system makes the EXTR parameters on the ONLFIL macro.
assumption. See TPF System Generation for more information about the file
System action: Validation is continued and output is address compute program (FACE) table generation.
produced, unless the STOPWARNING parameter is passed to
the file address compute program (FACE) table generator. FCTB0024E filename(function) BAND MUST BE LESS
User response: Do one of the following: THAN OR EQUAL TO number
304 TPF Messages (System Error, Offline, and Program Status Word)
FCTB0025W • FCTB0029E
Explanation: The value coded on the BAND parameter of the referenced in the message so the warning message is not
RAMFIL statement must not exceed the number referenced in issued.
the message.
See TPF System Generation for more information about the file
System action: Validation of the input is continued but no address compute program (FACE) table generation.
output is produced.
User response: Code a BAND number between 0 and the FCTB0027W filename(function) SHORT TERM POOLS
number referenced in the message. CANNOT BE DUPLICATED. DUPE=NO
ASSUMED.
See TPF System Generation for more information about the file
address compute program (FACE) table generation. Where:
filename
FCTB0025W filename(function) DUPLICATE parameter value, The file name that contains the function.
IGNORED.
function
Where: The function that issued the error.
filename Explanation: Short term pools must be non-duplicated.
The file name that contains the function.
System action: Validation is continued and output is
function produced, unless the STOPWARNING parameter is passed to
The function that issued the error. the file address compute program (FACE) table generator.
parameter User response: Do one of the following to remove the
The duplicate parameter name. warning message:
value v Do not code DUPE on short-term pool RAMFIL statements.
The parameter value that is being ignored. v Code DUPE=NO.
Explanation: The parameter referenced in the message was
coded already for this statement. The value referenced in the See TPF System Generation for more information about the file
message was ignored. address compute program (FACE) table generation.
See TPF System Generation for more information about the file parameter.
address compute program (FACE) table generation. The parameter name that is not valid.
Explanation: The parameter referenced in the message may
FCTB0026W filename(function) parameter IS NOT VALID only be coded on RAMFIL statements that also have PRIOR=1
FOR type coded.
value Where:
The value the PSON took by default.
filename
Explanation: Since the PSON parameter was not coded for The file name that contains the function.
this POOL, the file address compute program (FACE) table
function
generator created one.
The function that issued the error.
System action: Processing proceeds normally.
name
User response: Do one of the following: The record type name.
v If the default of PSON is acceptable, there is no action for Explanation: The record type coded on the RAMFIL
you to take. statement flagged and the record type in the message must
v If the default is not acceptable, code a different value on the both be coded
PSON parameter.
System action: Validation of the input is continued but no
output is produced.
See TPF System Generation for more information about the file
address compute program (FACE) table generation. User response: Code the record type referenced in the
message.
FCTB0031E filename(function) statement STATEMENT WAS See TPF System Generation for more information about the file
NOT CODED. address compute program (FACE) table generation.
Where:
FCTB0034E filename(function) THIS RECORD TYPE CAN
filename NOT BE SPANNED. ONLY PRIOR=1
The file name that contains the function. PERMITTED
function Where:
The function that issued the error.
filename
statement The file name that contains the function.
The statement name.
function
Explanation: The statement referenced in the message is The function that issued the error.
required but was not coded.
Explanation: All the ordinals for the record type indicated
System action: Validation of the input is continued but no must occur in one extent.
output is produced.
306 TPF Messages (System Error, Offline, and Program Status Word)
FCTB0035E • FCTB0039E
parameter
FCTB0036W filename(function) parameter PARAMETER IS The name of the missing parameter.
BEING IGNORED. THIS PARAMETER
MUST BE CODED ON THE FIRST RAMFIL Explanation: The parameter referenced in the message is a
IN THE INPUT DECK FOR THIS RECORD required parameter and must be coded.
TYPE RECORD TYPE System action: Validation of the input is continued but no
Where: output is produced.
User response: Code the correct DEVICE parameters. See TPF System Generation for more information about the file
address compute program (FACE) table generation.
See TPF System Generation for more information about the file
address compute program (FACE) table generation.
FCTB0042E filename(function) BASE OVERLAP
DETECTED. TO NEXT AVAILABLE BASE
FCTB0040W filename(function) EQU PARAMETER CODED
DEFAULTED LOCATION
ON THIS RAMFIL DOES NOT MATCH
THE EQU VALUE OF value CODED ON THE Where:
FIRST RAMFILE FOR THIS RECORD TYPE
filename
Where: The file name that contains the function.
filename function
The file name that contains the function. The function that issued the error.
function Explanation: The disk space occupied by the previous
The function that issued the error. RAMFIL statement overlaps the space in which the current
RAMFIL statement is defined.
value
The value the TPF system is taking for the EQU System action: Validation of the input is continued but no
parameter. output is produced.
Explanation: The value referenced in the message is being User response: Adjust the RECNO or BASE on the previous
assumed for the EQU parameter for this record type. RAMFIL statement or code a new BASE on the current
RAMFIL statement such that it does not occupy the space
System action: Validation is continued and output is
taken by the previous RAMFIL statement.
produced, unless the STOPWARNING parameter is passed to
the file address compute program (FACE) table generator. See TPF System Generation for more information about the file
address compute program (FACE) table generation.
User response: Do one of the following:
v If the system action is acceptable, no action is required.
FCTB0043W filename(function) INVALID PARAMETER
v If the system action is not acceptable, you must update the
parameter. PARAMETER IGNORED.
EQU parameter on the first RAMFIL statement for the
record type with the correct value. Where:
filename
See TPF System Generation for more information about the file
The file name that contains the function.
address compute program (FACE) table generation.
function
The function that issued the error.
FCTB0041E filename(function) FACE TABLE EXCEEDS
16MEG OF STORAGE. parameter
The name of parameter passed to the file address
Where:
compute program (FACE) table generator.
filename
Explanation: When invoking the FACE table generator, the
The file name that contains the function.
parameter aaaa was passed to the program. This parameter is
function not recognized by the FACE table generator and is ignored.
The function that issued the error.
System action: Validation is continued and output is
Explanation: The size of the file address compute program produced, unless the STOPWARNING parameter is passed to
(FACE) table exceeds 16 MB. The MVS linkage editor cannot the FACE table generator.
handle an object module larger than this.
User response: Check the spelling of the parameter name.
System action: Validation of the input is continued but no
See TPF System Generation for more information about the file
output is produced.
address compute program (FACE) table generation and for a
User response: There are several ways to lower the size of list of valid parameters.
the FACE table:
v Code the HASHSZ parameter of the RAM statement to FCTB0044E filename(function) value IS NOT VALID FOR
decrease the size of the hash table. parameter.
v If you are creating FARF4 and FARF5 addresses use the
Where:
lowest format type indicator (FTI) values possible to
decrease the size of the FTI tables built. filename
v If you are using BAND numbers, use the lowest band The file name that contains the function.
numbers possible to decrease the size of the band number function
table. The function that issued the error.
v Decrease the number of RAMFIL statements used to
describe your database. parameter
The parameter name.
v Use fewer unique records.
308 TPF Messages (System Error, Offline, and Program Status Word)
FCTB0045I • FCTB0049E
value
FCTB0047E filename(function) value IS OUT OF RANGE
The character value.
FOR parametertype ON THE parameter
Explanation: The value c is not valid for aaaa PARAMETER.
See TPF System Generation for more information about the file function
address compute program (FACE) table generation and for a The function that issued the error.
list of valid parameters.
value
The out of range value.
FCTB0045I filename(function) parameter DEFAULTED TO
parametertype
value
The parameter type.
Where:
parameter
filename The parameter name.
The file name that contains the function.
Explanation: The value specified on the parameter referenced
function in the message is not valid.
The function that issued the error.
System action: Validation of the input is continued but no
parameter output is produced.
The parameter name.
User response: None.
value
See TPF System Generation for more information about the file
The default value.
address compute program (FACE) table generation and for a
Explanation: The parameter referenced in the message took list of valid parameters.
the value noted in the message because the value was not
originally coded on the parameter.
FCTB0048W filename(function) parameter1 IS NOT A VALID
System action: Processing proceeds normally. PARAMETER WITHOUT THE parameter2
PARAMETER CODED, PARAMETER
User response: No response is necessary if the default is IGNORED.
acceptable. If the default is not acceptable, then the parameter
must be coded with the correct value. Where:
See TPF System Generation for more information about the file filename
address compute program (FACE) table generation and for a The file name that contains the function.
list of valid parameters.
function
The function that issued the error.
FCTB0046E filename(function) DUPLICATE parameter,value
parameter1
IS INVALID
The parameter that is not valid.
Where:
parameter2
filename The parameter not coded.
The file name that contains the function.
Explanation: An error occurred because a parameter was
function coded without its corresponding parameter.
The function that issued the error.
System action: Validation is continued and output is
parameter produced, unless the STOPWARNING parameter is passed to
The parameter type. the file address compute program (FACE) table generator.
Explanation: A duplicate parameter with a duplicate value See TPF System Generation for more information about the file
was found. address compute program (FACE) table generation.
function
FCTB0052E filename(function) THE VALUE CODED FOR
The function that issued the error.
PSEUDO, value1, EXCEEDS THE VALUE
parameter CODED FOR EXTR ON ONLFIL FOR THIS
The parameter name. DEVICE TYPE, value2.
value Where:
The parameter value.
filename
Explanation: An error occurred because the value specified The file name that contains the function.
on the parameter is not valid.
function
System action: Validation of the input is continued but no The function that issued the error.
output is produced.
value1
User response: Correct the parameter. The value coded for PSEUDO.
See TPF System Generation for more information about the file value2
address compute program (FACE) table generation and for a The value coded for the EXTR parameter on the ONLFIL
list of valid parameters. macro.
Explanation: The value coded for PSEUDO cannot exceed the
FCTB0050I filename(function) parameter IS EXTRANEOUS. value coded for the EXTR parameter on the ONLFIL macro for
this device type.
Where:
System action: Validation of the input is continued but no
filename output is produced.
The file name that contains the function.
User response: Do one of the following:
function
v Increase the value coded for EXTR for this device type.
The function that issued the error.
v Decrease the value for PSEUDO on this RAMFIL statement.
parameter
The extraneous parameter name.
See TPF System Generation for more information about the file
Explanation: An error occurred because the parameter is not address compute program (FACE) table generation.
a recognized parameter on the RAMFIL statement.
See TPF System Generation for more information about the file Explanation: There is another RAMFIL statement coded for
address compute program (FACE) table generation. this record type with the same value coded for the PRIOR=
parameter.
310 TPF Messages (System Error, Offline, and Program Status Word)
FCTB0055W • FCTB0059I
See TPF System Generation for more information about the file filename
address compute program (FACE) table generation. The file name that contains the function.
function
FCTB0056E filename (function) EXPLICIT USER The function that issued the error.
COLLISION WITH RAMFIL number. parameter
Where: The parameter that is not valid.
System action: Validation of the input is continued but no See TPF System Generation for more information about the file
output is produced. address compute program (FACE) table generation.
User response: Correct the USER parameters on these
RAMFIL statements. FCTB0059I filename(function) RAMFIL WAS CODED AS
See TPF System Generation for more information about the file type ON A type DEVICE TYPE
address compute program (FACE) table generation. Where:
filename
The file name that contains the function.
function
The function that issued the error.
type
FCTB0062W filename(function) INCONSISTENT
The type of duplication.
UCOMDATA; FIRST RAMFIL'S
Explanation: There is a mismatch between the type of UCOMDATA = value.
duplication specified for this RAMFIL statement and the
Where:
duplication of the device. This is allowed but is highlighted
for the user's information. filename
The file name that contains the function.
System action: None.
function
User response: Verify that this is what was intended.
The function that issued the error.
See TPF System Generation for more information about the file
value
address compute program (FACE) table generation.
The value coded for the UCOMDATA parameter.
See TPF System Generation for more information about the file size Size defined on the first RAMFIL statement for this
address compute program (FACE) table generation. record type.
Explanation: Too few records were coded for this record Where:
type.
filename
System action: Validation of the input is continued but no The file name that contains the function.
output is produced.
function
User response: Do one of the following: The function that issued the error.
v Increase the value coded for RECNO. Explanation: The BASE parameter cannot be less than 00002.
v Verify that other RAMFIL statements for this record type
System action: Validation is continued and output is
were not coded incorrectly, thereby not including its
produced, unless the STOPWARNING parameter is passed to
RECNO count into the total for this record type.
the file address compute program (FACE) table generator.
See TPF System Generation for more information about the file User response: Determine what the BASE parameter should
address compute program (FACE) table generation. be and recode it.
312 TPF Messages (System Error, Offline, and Program Status Word)
FCTB0065E • FCTB0070E
See TPF System Generation for more information about the file Explanation: The RAMFIL statements for each device type
address compute program (FACE) table generation. must be all together.
System action: Validation of the input is continued but no
FCTB0065E filename(function) FTI VALUE IN (type output is produced.
indicator) EXCEEDS DEFINITION FROM
User response: Reorder the RAMFIL statements.
UFTFTI STATEMENT.
See TPF System Generation for more information about the file
Where:
address compute program (FACE) table generation.
filename
The file name that contains the function.
FCTB0068E filename(function) BASE PARAMETER IS
function REQUIRED IN THIS CASE.
The function that issued the error.
Where:
type
filename
The universal format type (UFT).
The file name that contains the function.
indicator
function
The format type indicator (FTI).
The function that issued the error.
Explanation: The values coded on the UFTFTI macro
Explanation: See the reference for reasons why the BASE
determine the number of FTIs for the defined UFTs. The FTI
parameter is required.
specified in the error message is out of the range defined.
System action: Validation of the input is continued but no
System action: Validation of the input is continued but no
output is produced.
output is produced.
User response: Determine why the BASE parameter is
User response: Determine what the correct value should be
required and correct.
and change it or increase the size defined on the UFTFTI
macro. See TPF System Generation for more information about the
RAMFIL statement.
See TPF System Generation for more information about the file
address compute program (FACE) table generation.
FCTB0069E filename(function) NUMBER OF RECIDS
FCTB0066E filename(function) UFT/FTI COMBINATION CODED, recordid1, EXCEEDS THE
(type,indicator) ALREADY IN USE MAXIMUM ALLOWED, recordid2.
Where: Where:
filename filename
The file name that contains the function. The file name that contains the function.
function function
The function that issued the error.
The function that issued the error.
type recordid1
The number of record IDs coded.
The universal format type (UFT).
recordid2
indicator
The maximum number of record IDs allowed.
The format type indicator (FTI).
Explanation: UFT/FTI combinations cannot be shared. Explanation: Too many record types were coded.
System action: Validation of the input is continued but no
System action: Validation of the input is continued but no
output is produced.
output is produced.
User response: Change this combination to a used one or User response: Delete enough record types to bring the count
under the allowed maximum.
change the RAMFIL statement that is currently using it.
See TPF System Generation for more information about the file
See TPF System Generation for more information about the file
address compute program (FACE) table generation. address compute program (FACE) table generation.
Where: Where:
filename
filename
The file name that contains the function. The file name that contains the function.
function function
The function that issued the error.
The function that issued the error.
device
FCTB0073E filename(function) MIGRATION NOT
The device for which this RAMFIL statement was not
POSSIBLE: CANNOT COVER THE
coded.
SHORTEST RECNO CODED.
Explanation: The RAMFIL statements must only be coded for
Where:
devices that are defined by the ONLFIL macro.
filename
System action: Validation of the input is continued but no
The file name that contains the function.
output is produced.
function
User response: Do one of the following:
The function that issued the error.
v Define this device on the ONLFIL macro.
Explanation: There is no possible way to migrate with the
v Change the RAMFIL statement to use a device that is
current layout.
defined.
System action: Validation of the input is continued but no
See TPF System Generation for more information about the file output is produced.
address compute program (FACE) table generation.
User response: Determine whether there is a better way to
lay out the database. Some universal format type/format type
FCTB0071W filename(function) ROLLING MIGRATION IS indicator (UFT/FTI) combinations might be used inefficiently.
POSSIBLE
See TPF System Generation for more information about the file
Where: address compute program (FACE) table generation.
filename
The file name that contains the function. FCTB0074E filename(function) MUST CODE AT LEAST
BAND OR UFT14.
function
The function that issued the error. Where:
314 TPF Messages (System Error, Offline, and Program Status Word)
FCTB0076W • FCTB0081E
Explanation: The record type coded does not have enough Where:
FARF3 or FARF4 addressing descriptors defined to cover all
filename
the ordinal numbers for the record type.
The file name that contains the function.
System action: Validation is continued and output is
function
produced, unless the STOPWARNING parameter is passed to
The function that issued the error.
the file address compute program (FACE) table generator.
Explanation: The USER parameter is not coded as *, which is
User response: The user should define enough FARF3 or
required for an SSU shared record.
FARF4 addressing descriptors to cover all the ordinals for the
record type and regenerate the FACE table. If nothing is done, System action: Validation of the input is continued but no
then some ordinals will not be accessible using the FARF (as output is produced.
referenced in the message) addressing.
User response: If this record is not to be SSU shared, then
See TPF System Generation for more information about the file update its entry in the FTVA04 segment. Otherwise, change
address compute program (FACE) table generation. the USER parameter on this RAMFIL statement.
See TPF System Generation for more information about the file
FCTB0077E filename(function) RAMFIL DEFINITION address compute program (FACE) table generation.
EXCEEDS DEVICE END.
Where: FCTB0080W filename(function) REQUIRED RECORD TYPE
recordid NOT FOUND.
filename
The file name that contains the function. Where:
function filename
The function that issued the error. The file name that contains the function.
Explanation: The records defined by the RAMFIL statement function
coded do not fit on the device The function that issued the error.
System action: Validation of the input is continued but no recordid
output is produced. The record ID.
User response: Check the DEVICEx parameter on the Explanation: This record type is required but there are no
ONLFIL macro to make sure the device size value is correct. If RAMFIL statements coded for it.
it is, then the RAMFIL statement flagged needs to be corrected
so that all of its records fit on the device. System action: Validation is continued and output is
produced, unless the STOPWARNING parameter is passed to
See TPF System Generation for more information about the file the file address compute program (FACE) table generator.
address compute program (FACE) table generation.
User response: Code a RAMFIL statement for the record
type. If a RAMFIL statement is not coded for this record type,
FCTB0078E filename(function) SIZE FOR THIS RECORD facilities that use this record type will not work
MUST BE AT LEAST description
See TPF System Generation for more information about the file
Where: address compute program (FACE) table generation.
filename
The file name that contains the function. FCTB0081E filename(function) RAMFILS MUST BE
CODED FOR RECORD ID recordid ON
function
DEVICE type
The function that issued the error.
Where:
description
The size description. filename
The file name that contains the function.
Explanation: The size coded on this RAMFIL statement does
not match the size required for this record type.
function
FCTB0084E filename(function) REQUIRED RECORD TYPE
The function that issued the error.
recordid NOT FOUND.
recordid
Where:
The record ID.
filename
type
The file name that contains the function.
The device type.
function
Explanation: This record ID is required on this device type.
The function that issued the error.
System action: Validation of the input is continued but no
recordid
output is produced.
The record ID.
User response: Code a RAMFIL statement for this record
Explanation: This record type is required but there are no
type on this device type.
RAMFIL statements coded for it.
See TPF System Generation for more information about the file
System action: Validation of the input is continued but no
address compute program (FACE) table generation.
output is produced.
316 TPF Messages (System Error, Offline, and Program Status Word)
FCTB0087W • FCTB0091E
filename type
The file name that contains the function. The device type.
function Explanation: Too few #KEYPT records were coded for this
The function that issued the error. device type.
Explanation: Certain options passed to the file address User response: Increase the amount to above the minimum.
compute program (FACE) table generator belong to a class of
See TPF System Generation for more information about the file
options in which only one member of that class (type) of
address compute program (FACE) table generation.
option can be coded. More than one member from a class was
coded
FCTB0090E filename(function) parameter EXCEEDS THE
System action: Validation is continued and output is
NUMBER OF MODULES DEFINED IN
produced, unless the STOPWARNING parameter is passed to
ONLFIL.
the FACE table generator.
Where:
User response: If the assumed default is alright, then no user
action is necessary. If the assumed default is incorrect, then the filename
options passed to the generator need to be updated so that The file name that contains the function.
only one option from a class is passed.
function
See TPF System Generation for more information about the file The function that issued the error.
address compute program (FACE) table generation.
parameter
The LOMOD or NOMOD parameter.
FCTB0088W filename(function) PSON OVERLAP
DETECTED, PSON DEFAULTED TO value. Explanation: The valid coded for the LOMOD or NOMOD
parameter must be less than or equal to the number of prime
Where: and pseudo modules coded on the ONLFIL macro.
filename System action: Validation of the input is continued but no
The file name that contains the function. output is produced.
function User response: Recode the LOMOD or NOMOD parameter
The function that issued the error. so that its value does not exceed the number of prime and
pseudo modules combined.
value
The value that PSON is changed to. See TPF System Generation for more information about the file
address compute program (FACE) table generation.
Explanation: The PSON coded on the RAMFIL statement
overlaps the PSON range defined by another RAMFIL
statement. FCTB0091E filename(function) BAND number IN USE BY
PROCESSOR OR I-STREAM UNIQUE
System action: Validation is continued and output is
RECOR D.
produced, unless the STOPWARNING parameter is passed to
the file address compute program (FACE) table generator. Where:
User response: If the defaulted value is acceptable then no filename
user response is required. If the default is not acceptable, then The file name that contained the function.
PSON needs to be recoded so that it falls outside of the range
of already coded psons for this pool type. function
The function that issued the error.
See TPF System Generation for more information about the file
address compute program (FACE) table generation. number
The BAND number in conflict.
FCTB0089E filename(function) MINIMUM OF records Explanation: Only subsystem user (SSU) unique records can
RECORDS NEEDED FOR #KEYPT ON share BAND numbers.
DEVICE type. System action: Validation of the input is continued but no
Where: output is produced.
See TPF System Generation for more information about the file
address compute program (FACE) table generation. FCTB0095E filename(function) RAMFIL CODED FOR A
DEVICE NOT DEFINED BY ONLFIL.
318 TPF Messages (System Error, Offline, and Program Status Word)
FCTB0097W • FCTB0100W
User response: Correct the RECNO for this pool type so that
FCTB0099W filename(function) INSUFFICIENT parameter
is under the maximum value.
ALLOCATED TO COVER RECNO. TOTAL
See TPF System Generation for more information about FACE RECNO: type parameter CODED: recno THIS
table generation. IS IGNORED IN STAGE=stage
Where:
FCTB0097W filename(function) TOTAL RECNO CODED
filename
FOR THIS POOL TYPE (type) EXCEEDS THE
The file name that contained the function.
FARF3 CAPACITY. THIS IS IGNORED IN
STAGE=FARF45. function
The function that issued the error.
Where:
parameter
filename
The BAND/UFTI4/UFTI5 parameter.
file name containing function
type
function
The total RECNO coded for this record type.
function issuing error
recno
type
The RECNO covered by the parameter.
RECNO coded for this pool type
stage
Explanation: The maximum RECNO allowable for pools is
The current TPF system stage.
226. This pool type exceeds that. Since this is a FARF Stage 4 to
FARF Stage 5 migration path, it is ignored. Explanation: The amount of RECNO covered by the
BAND/UFTI5 parameter is not sufficient to cover the amount
System action: Validation continues and output is produced,
of RECNO specified for this record type. However, the BAND
unless the STOPWARNING parameter is passed to the file
parameter is ignored in a FARF Stage 4 to FARF Stage 5
address compute program (FACE) table generator.
migration path and the UFTI5 parameter is ignored in the
User response: Determine whether this is permissible and FARF Stage 3 to FARF Stage 4 migration path.
correct it if not.
System action: Validation is continued and output is
See TPF System Generation for more information about the file produced, unless the STOPWARNING parameter is passed to
address compute program (FACE) table generation. the file address compute program (FACE) table generator.
User response: Do one of the following:
FCTB0098E filename(function) INSUFFICIENT v Delete the parameter.
INSUFFICIENT parameter ALLOCATED TO v Correct the parameter.
COVER RECNO. TOTAL RECNO: type
parameter CODED: recno
See TPF System Generation for more information about the file
Where: address compute program (FACE) table generation.
filename
The file name that contained the function. FCTB0100W filename(function) THE THE parameter
PARAMETER MUST BE CODED THE SAME
function ON ALL PRIOR=1 RAMFILS FOR THIS
The function that issued the error. RECORD TYPE. VALUE HAS BEEN
parameter DEFAULTED TO value
The BAND/UFTI4/UFTI5 parameter. Where:
type filename
The total RECNO coded for this record type. The file name that contained the function.
recno function
The RECNO covered by the parameter. The function that issued the error.
Explanation: The amount of RECNO covered by the parameter
BAND/UFTI4/UFTI5 parameter is not sufficient to cover the The RAMFIL parameter which is in error
amount of RECNO specified for this record type.
value
System action: Validation of the input is continued but no The value that the RAMFIL parameter was defaulted to.
output is produced.
Explanation: The parameter referenced in the message must
User response: Do one of the following: be coded with the same value on all PRIOR=1 RAMFILs for
v Code enough BAND/UFT14/UFT15 descriptors to cover the the same RECID.
number of records coded.
System action: Validation is continued and output is
v Decrease the amount of RECNO coded for this record type. produced, unless the STOPWARNING parameter is passed to
the file address compute program (FACE) table generator.
See TPF System Generation for more information about the file
address compute program (FACE) table generation. User response: If the default is acceptable, then no action is
needed. If the default is unacceptable then the parameter must User response: Correct the statement so that the parameter is
be coded the same on all PRIOR=1 RAMFILs for this RECID. only coded once.
See TPF System Generation for more information about the file See TPF System Generation for more information about the file
address compute program (FACE) table generation. address compute program (FACE) table generation.
See TPF System Generation for more information about the file See TPF System Generation for more information about the file
address compute program (FACE) table generation.
address compute program (FACE) table generation.
FCTB0102E filename(function) TOO MANY SSU NAMES FCTB0105E filename(function) THE name STATEMENT
CODED HAS NO PARAMETERS CODED
Where: Where:
filename filename
The file name that contained the function. The file name that contained the function.
function function
The function that issued the error. The function that issued the error.
System action: Validation of the input is continued but no Explanation: The statement referenced in the message has no
output is produced. parameters coded. Certain parameters on this statement must
be coded.
User response: Code less than 65 SSU names.
System action: Validation of the input is continued but no
See TPF System Generation for more information about the file output is produced.
address compute program (FACE) table generation.
User response: Code the required parameters.
See TPF System Generation for more information about the file
FCTB0103W filename(function) DUPLICATE parameter
address compute program (FACE) table generation.
PARAMETER. DUPLICATE IGNORED
Where:
FCTB0106I filename(function) RESTORE=YES CODED
filename FOR A RECORD TYPE WHICH SHOULD
The file name that contained the function. NOT BE RESTORED
function Where:
The function that issued the error.
filename
parameter The file name that contained the function.
The parameter name.
function
Explanation: The parameter referenced in the message was The function that issued the error.
coded more than once for a statement.
Explanation: RESTORE=YES was coded on one of the
System action: Validation is continued and output is following record types:
produced, unless the STOPWARNING parameter is passed to v #CIMR1-8
the file address compute program (FACE) table generator.
v #CTKX
320 TPF Messages (System Error, Offline, and Program Status Word)
FCTB0107E • FCTB0110E
v #DBRRI function
v #IPL1-4. The function that issued the error.
v #KBA number1
v #KEYPT The number of records allocated for the #INODE fixed
file record.
v #KFBX0-254
v #KSA1-8 number2
The number of records allocated for the #FLOCK fixed
v #OLD1-8 file record.
v #PROG1-8
Explanation: The #INODE and #FLOCK fixed file records
v #PVR1-8 must have the same number allocated in the file address
v #RLOG1-32 compute program (FACE) table. For example, if you want to
v #RSTRI have 100 #FLOCK fixed file records allocated, you must
allocate 100 #INODE fixed file records.
v #TPLBL
v #XPRG1-8 System action: Verifying the input continues but no output is
produced.
These record types have information in them that should not User response: Do the following:
be changed when a restore is done.
1. Determine which record must be increased or decreased.
System action: None. 2. Correct the #INODE or #FLOCK fixed file record.
User response: Do not code RESTORE or code
RESTORE=NO for this record type. See TPF System Generation for more information about the
FACE table generation.
See TPF System Generation for more information about the file
address compute program (FACE) table generation.
FCTB0109E filename(function) #RLOG RECNO MUST FILL
A WHOLE TRACK
FCTB0107E filename(function) EITHER ALL OR NONE OF
THE FOLLOWING RECORDS MUST BE Where:
CODED FOR A PROGRAM BASE (WHERE
filename
n = PROGRAM BASE NUMBER): #PROGn,
The file name that contains the function.
#XPRGn, #PVRn
function
Where:
The function that issued the error.
filename
Explanation: The number of ordinals coded for the RECNO
The file name that contained the function.
parameter of the RAMFIL statement must be a multiple of the
function number of records for each track of a 4-K record for the device
The function that issued the error. type being used.
Explanation: These program base records must all exist or all System action: Verification of the input continues, but no
not exist. For example, if you want to define program base output is produced.
number 4, you need to define records #PROG4, #XPRG4, and
User response: Code the RAMFIL statement, specifying
#PVR4. This error is generated if you define only #PROG4
enough records for the RECNO parameter so the value is an
records.
even multiple of the number of records for each track for a
System action: Validation of the input continues but no 4-K record for the device type being used.
output is produced.
User response: Do the following: FCTB0110E filename(function) #RLOG MUST FILL AT
LEAST TWO TRACKS
1. Determine which program base numbers have only been
partially defined. Where:
2. Correct the partially defined program base numbers.
filename
The file name that contains the function.
See TPF System Generation for more information about the file
address compute program (FACE) table generation. function
The function that issued the error.
FCTB0108E filename(function) INODE AND FLOCK Explanation: The number of ordinals coded for the RECNO
RECORDS NEED TO HAVE THE SAME parameter of the RAMFIL statement must fill at least two
NUMBER ALLOCATED. INODE HAS tracks.
number1 FLOCK HAS number2
System action: Verification of the input continues, but no
Where: output is produced.
FCTB0111E filename(function) ALL #RLOG RECORDS FCTB0114I filename(function) THIS RECORD TYPE WAS
MUST BE DEFINED ON THE SAME SPANNED. THIS WILL AFFECT RECORD
LOGICAL DEVICE ACCESS EFFICIENCY
Where: Where:
filename filename
The file name that contains the function. The file name that contains the function.
function function
The function that issued the error. The function that issued the error.
Explanation: An #RLOG record type was found on more Explanation: A PRIOR=2 or higher was coded for an #RLOG
than one device type. record type. This reduces the effectiveness of the record log
processing.
System action: Verification of the input continues, but no
output is produced. System action: None.
User response: Code all ordinals for a particular #RLOG User response: Code an #RLOG record type with just one
record type for the same device type. RAMFIL statement for each record type to improve the
effectiveness.
record_type Where:
An #RLOGx record type, where x is a number from 1 to processor
8. The processor identifier (ID).
Explanation: There are fewer #RLOGx record types coded Explanation: A RAMFIL statement was not coded for the
than processors. specified record type and processor.
System action: Verification of the input continues and output System action: Validation of the input is continued, but no
is produced unless the STOPWARNING parameter is passed output is produced.
to the FACE table generator (FCTBG).
User response: Code a RAMFIL statement for the specified
User response: Do one of the following: record type and processor.
v Reduce the number of processors coded for the SYSID
parameter of the CONFIG macro. See TPF System Generation for more information about file
address compute (FACE) program table generation.
v Code as many #RLOGx record types as there are processors.
322 TPF Messages (System Error, Offline, and Program Status Word)
FCTB0117E • FCTB0122E
Where:
FCTB0120E filename(function) INVALID USER
filename PARAMETER FOR A UNIQUE RECORD.
The file name that contains the function. MUST BE CODED AS (SSUN,PROC,*)
WHERE SSUN IS THE SUBSYSTEM USER
function NAME AND PROC IS THE PROCESSOR
The function that issues the error. NAME
Explanation: A RAMFIL statement was coded that overlays Where:
the default volume table of contents (VTOC) location. The
location for the VTOC placement defaults to the last valid filename
track location for the specified device type. The file name that contains the function.
User response: Do one of the following: Explanation: The USER parameter for the RAMFIL statement
v Code the RAMFIL statement to avoid the location overlap. was not coded correctly. The parameter must be coded as
USER=(ssun,proc,*), where ssun is a valid subsystem user (SSU)
v Add a RAMFIL statement with the VTOC parameter name and proc is a valid processor identifier (ID).
specified to remove the overlap.
System action: Validation of the input continues, but no
See TPF System Generation for more information about file output is produced.
address compute (FACE) program table generation. User response: Correct the USER parameter for the RAMFIL
statement.
FCTB0118E filename(function) VTOC MUST COVER A See TPF System Generation for more information about file
FULL TRACK address compute (FACE) program table generation.
Where:
See TPF System Generation for more information about file proc
address compute (FACE) program table generation. The processor identifier (ID).
Explanation: A RAMFIL statement was not coded for the
FCTB0119E filename(function) VTOC MUST END BEFORE specified record type with a USER parameter of
CYLINDER 4369 TRACK 1 USER=(ssun,proc,*).
User response: Do one of the following: User response: See your IBM service representative.
v Add the necessary #KFBXn definitions See TPF System Generation for more information about the file
v Reduce the value of the NFBACK parameter address compute (FACE) program table generation.
v Set the value of the NFBACK parameter to 0.
range xxxx
The range of excess fallback extents coded. This can be a The option.
single fallback extent such as #KFBX5 or a range of yyyy
extents as in #KFBX3 – #KFBX5. The record type.
Explanation: When the NFBACK parameter of the RAM Severity: 0 or 7
macro is not zero, the number of #KFBXn definitions must be
equal to or greater than the number of fallback extents defined Explanation: The option referenced in the message was
by the NFBACK parameter. The range of required #KFBXn coded in the SIP stage I deck to be included in the TPF
definitions is #KFBX0 – #KFBXn, where n is the value of the system. This option may require the record type referenced in
NFBACK parameter minus 1 (n = f − 1). Only the number of the message.
definitions specified by the NFBACK parameter are used. If
A RAMFIL macro was not coded for this record type. Severity
the NFBACK parameter is set to zero, all the #KFBXn
7 occurs when the record is required by the TPF code. Severity
definitions are used.
0 occurs when the record is required because of the
System action: Validation of the input continues. Output is application program or optional support.
324 TPF Messages (System Error, Offline, and Program Status Word)
GEN002 • GEN018
System action: None. RAMFIL macros for the record type referenced in the message.
The minimum number of records than can be specified for a
User response: Do the following: user for this record type is shown in the message.
1. Code a RAMFIL statement if the record type is required.
System action: None.
2. Rerun the FACE table generator (FCTBG).
3. Rerun SIP stage I. User response: Do the following:
1. Correct the appropriate RAMFIL macro statements for the
record type to specify the minimum number of records.
GEN002 xxxx RECORD TYPE IS REQUIRED BUT A
2. Rerun the FACE table generator (FCTBG).
RAMFIL WAS NOT CODED
3. Rerun SIP stage I.
Where:
xxxx GEN010 EDITOR NAME FOR RESIDENT APPLIC.
The record type. xxxx WAS NOT SPECIFIED ON MSGRTA
Severity: 0 or 7 MACRO. DEFAULT OF yyyy ASSIGNED
Severity: 0
GEN013 BSNCT MACROS MUST BE CODED IF
Explanation: The parameter referenced in the message is THERE ARE BISYNC LINES
coded on the RAMFIL macro for the record type referenced in
Severity: 7
the message. This parameter is incorrect for this record type.
Explanation: If the user generates BISYNC lines, then at least
System action: None.
one BSNCT macro must be coded. BISYNC line support
User response: Do the following: requires the CRSx segment, which system initialization
program (SIP) generates when BSNCT macros are coded.
1. Make the necessary corrections.
2. Rerun the FACE table generator (FCTBG). System action: None.
3. Rerun SIP stage I. User response: When generating BISYNC lines provide at
least one BSNCT macro.
GEN006 AN INSUFFICIENT NUMBER OF RECORDS
HAVE BEEN SPECIFIED FOR RECORD GEN018 SIP PROGRAM TABLE (xxxx) IS EMPTY
TYPE xxxx – THE MINIMUM NUMBER OF
RECORDS REQUIRED IS yyyy Where:
Where: xxxx
The program table that was empty (OL, CP, RT, CRT, ICL,
xxxx ISA, ISC, or KP).
The record type.
Severity: 7
yyyy
The number of records. Explanation: SIP stage I requires entries to the system
initialization program (SIP) program tables.
Severity: 7
System action: None.
Explanation: The system initialization program (SIP)
calculated that there are not enough records specified on the User response: Do the following:
Explanation: Every subsystem user ID (USER=) appearing in GEN051 xxxx SUPPORT REQUESTED in yyyy
the MSGRTA, GLSYNC, or RAMFIL macros must be defined MACRO BUT NOT SUPPORTED IN A zzzz
in the SSUID parameter of SSDEF. If SSDEF was not coded, ENVIRONMENT
then USER= must be allowed to default or be coded as the
default. Where:
326 TPF Messages (System Error, Offline, and Program Status Word)
GEN053 • GEN063
an incompatibility with a programming support parameter v If the program referenced in the message is not to be
coded in the user macros. allocated in the TPF system, remove the UTPROT macro
coded for it.
System action: None.
User response: Do one of the following: In either case, make the necessary corrections and rerun SIP
v If the program support referenced in the message is stage I.
required, you must not code the feature for the
programming environment that is shown in the message. GEN055 xxxx MACRO CODED BUT A yyyy
v If the program support referenced in the message is not ENVIRONMENT DOES NOT EXIST
required, the reference to it in the SIP user macro shown in
the message must be eliminated. Severity: 7
Where:
In either case, make the necessary corrections and rerun SIP
stage I. xxxx
A user macro.
Where: Severity: 7
Where:
GEN068 xxxx TCU SPECIFIED BUT LINES
xxxx
OMITTED, OR VICE VERSA
The line type (SKN/PLN).
Severity: 7
yyyy
Explanation: One of the following errors occurred: The specification in the SYNCLK macro.
v N2703 was specified in the NETWK macro but no lines Severity: 7
information was specified
Explanation: yyyy as specified in the SYNCLK macro exceeds
v The LINES macro was coded with lines information but
the number of SKN/PLN lines that were specified in the
N2703 in the NETWK macro was not coded or set to 0.
LINES macro.
System action: None.
System action: None.
User response: Do the following:
User response: Do the following:
1. Correct the LINES macro to specify a line type.
1. Correct the LINES or the SYNCLK macro.
2. Rerun SIP stage I.
2. Rerun SIP stage I.
328 TPF Messages (System Error, Offline, and Program Status Word)
GEN089 • GEN118
overrun, then no action is required. Otherwise, adjust the System action: None.
following SIP macro parameters so that the sum of the SLC
User response: If the post processor sort/merge feature is
and RCAT entries will be less than or equal to 50:
required, specify a shorter 3270 message length.
((MAXAP) + (NLINK-N1LNK) + (SLCAI) + (PSLNS)) ≤ 50
Notes: GEN107 FOR CAPTURE/RESTORE, DDCCAP,
1. MAXAP is a parameter of the MSGRT macro. RESCAP AND LOGCAP MUST BE CODED
2. NLINK and N1LNK are parameters of the SYNCLK macro. Severity: 7
3. SLCAI and PSLNS are parameters of the LINES macro.
Explanation: At least one, but not all of the capture and
restore macros were coded. If capture and restore is to be
GEN089 GFENS OPERAND (RAM MACRO) included in the TPF system, all three macros must be coded.
INVALID, xxxx ASSUMED
System action: None.
Where:
User response: Do the following:
xxxx 1. Code the remaining capture and restore macros.
The assumed value.
2. Rerun SIP stage I.
Severity: 7
Explanation: The GFENS operand must be greater than the GEN109 CAPTURE PARAMETERS CODED FOR
highest data set number in the GENFIL macros. UNSUPPORTED DEVICE xxxx
System action: None. Where:
User response: Do the following: xxxx
1. Correct the GFENS operand. The storage device.
2. Rerun SIP stage I if the assumed value is not valid. Severity: 7
Explanation: Parameters were coded in the DDCCAP macro
GEN090 DUPLICATE OR INVALID GENERAL FILE for a storage device that was not specified in the ONLFIL
DATA SET NUMBERS SPECIFIED IN macro.
GENFIL MACROS
System action: None.
Severity: 7
User response: Do the following:
Explanation: The data set number was entered more than 1. Correct the DDCCAP parameters.
once or the data set number was out of the required range (0
to 59). 2. Rerun SIP stage I.
1. Code the message router macros. the message contained a STANO value that was greater than
2. Rerun SIP stage I. the number of BBSAT macros coded.
System action: None.
GEN124 MESSAGE ROUTER SUPPORT REQUIRED User response: Do the following:
BUT GLOB3 NOT CODED IN GLOBAL
1. Make the necessary corrections.
MACRO
2. Rerun SIP stage I.
Severity: 7
Explanation: None. GEN130 MSGSW SPECIFIED WITHOUT
System action: None. INCLUDING RES0
1. Make the necessary corrections. Explanation: Message switching was requested through the
2. Rerun SIP stage I. MSGSW parameter of CONFIG macro but RES0 was not
included by specifying RES in the CONFIG macro. Inclusion
of message switching requires the RES0 application program.
GEN125 PROCESSOR x SPECIFIED IN CRASTB IS
NOT SPECIFIED IN MSGRTA OR CONFIG System action: None.
Explanation: Only the processors defined in the MSGRTA GEN131 SLC OR NEF SHOULD BE SPECIFIED
macro or the CONFIG macro should be in the CRASTB WITH MSGSW
definition.
Severity: 7
System action: None.
Explanation: If MSGSW=YES is coded on the CONFIG
User response: Do the following: macro, then NEF=YES must also be coded on the CONFIG
1. Correct the CRASTB macro, CONFIG macro, or MSGRTA macro or SLCAI must be coded as nonzero on the LINES
macro. macro.
2. Rerun SIP stage I. System action: None.
330 TPF Messages (System Error, Offline, and Program Status Word)
GEN139 • GEN159
GEN139 BSC LINE SUPPORT NOT INCLUDED BUT GEN150 PROGRAM xxxx LOADING VERSION yy
BSNCT MACRO WAS SPECIFIED FOR AND ASSEMBLY IS VERSION zz
STANM xxxx
Where:
Where:
xxxx
xxxx The program name.
The station name.
yy The version number as listed in the SPPGML macro.
Severity: 7
zz The version number.
Explanation: A BSNCT macros with the STANM referenced
Severity: 0
in the message was coded for the system generation CPU but
no BSC lines were defined for this CPU. Explanation: The program identified in the message was
assembled using the version number referenced in the
System action: None.
message. The program is listed in the SPPGML macro with a
User response: Do the following: different version number.
1. Correct the error. System action: None.
2. Rerun SIP stage I.
User response: Do the following:
1. Change the SPPGML macro.
GEN142 LINE NUMBER FOR SNCT ENTRY WITH
2. Rerun SIP stage I if necessary.
STANM xxxx and STANO yy IS NOT A BSC
LINE
GEN151 SIP MACRO xxxx NOT CODED IN STAGE I
Where:
INPUT, CALLED INTERNALLY TO SET
xxxx DEFAULT VALUES
The station name.
Where:
yy The station number.
xxxx
Severity: 7 The SIP user macro.
Explanation: The line number for the SNCT entry with the Severity: 0
station name and station number referenced in the message is
Explanation: The SIP user macro referenced in the message
in error.
was not included in the user’s stage I system generation input.
System action: None. The system initialization program (SIP) will call this macro
from its internal structure to set the default values.
User response: Do the following:
1. Check the SIP report for the correct BSC line numbers. System action: None.
2. Make the necessary corrections. User response: If the assumption is not valid, correct the
3. Rerun SIP stage I. error and rerun SIP stage I.
GEN143 APPL xxxx FOR SNCT ENTRY WITH GEN158 THE MAXAP VALUE ON MSGRT MACRO
STANM yyyy IS NOT IN RCAT TABLE EXCEEDED LIMIT AND HAS BEEN
REDUCED BY &P1
Where:
Severity: 0
xxxx
The application name. Explanation: The maximum number of application programs
that can be defined by you is 256-M where M is the number of
yyyy fixed application programs (for example, RES0
The station name. (&P1=OVERAGE COUNT).
Severity: 7 System action: None.
Explanation: The application for the SNCT entry with the User response: None.
station name referenced in the message is in error.
System action: None. Note: The maximum value of 256 was set. If a lower value is
required, you must redefine the MAXAP value on the
User response: Do the following: MSGRT macro and then rerun SIP stage I.
1. Make the necessary corrections.
2. Rerun SIP stage I. GEN159 THE NUMBER OF MSGRTA APPLICATION
NAMES PLUS THE FIXED APPLIC’S
EXCEED THE LIMIT BY &P1
Severity: 7
Explanation: The maximum number of user application
System action: None. Explanation: The device name referenced in the message is
for the online pool programs to know the device by. Therefore,
User response: Do the following: each device must have a unique name.
1. Recode VOLNOx, PERMx, and EXTRx of the ONLFIL In the ONLFIL macro, the parameter NAMDEVx (where x is
macro so that the overlap is eliminated. the device type (for example, A would be used for device type
2. Recode VOLNLGF of the GENSIP macro so that the A)) can be used to assign different names to the same device
overlap is eliminated. types.
3. Rerun SIP stage I. System action: None.
User response: Do the following:
1. Make the necessary corrections.
2. Rerun SIP stage I.
332 TPF Messages (System Error, Offline, and Program Status Word)
GEN173 • GEN190
xxxx Severity: 7
The number of online modules.
Explanation: The number of processor IDs (SYSID) specified
yyyy in the CONFIG macro does not match the number of primary
The general file modules. CRAS operator consoles (PRCRS) specified in CRASTB.
Severity: 7 Severity: 7
Explanation: The message router was coded in a TPF system Explanation: The record referenced in the message must be
where BSSGEN=NO. coded for each user specifically. It must never be a common
record.
System action: None.
System action: None.
User response: Do the following:
User response: Do the following:
1. Remove the message router support.
1. Specify the record for each user.
2. Rerun SIP stage I.
2. Rerun SIP stage I.
Where: Where:
xxxx xxxx
The name of the global. The file address compute program (FACE) type of the
record.
yyyy
Severity: 0
The primary user.
Severity: 0 Explanation: The record referenced in the message was not
found or it is not defined as 4K.
Explanation: If a synchronized global is coded as common
System action: Dynamic LU support is disabled.
for any user, the same global must be coded as
COMMON=YES for the primary user. The primary user’s User response: If you want dynamic LU support, do the
global was changed to COMMON=YES. following:
System action: None. 1. Specify the FACE types and make sure they are defined as
4K in the SIP stage 1 deck.
User response: None, unless the global in error was coded
incorrectly. 2. Run the FACE table generator (FCTGB) again.
3. Run SIP stage 1 again.
334 TPF Messages (System Error, Offline, and Program Status Word)
GLO001 • GLS003
GLO001 PARAMETER xxxx EXCEEDS PARAMETER GLS002 THE MAXIMUM NUMBER OF xxxx
LIMIT OF 94 EXCEEDS yyyy
Where: Where:
xxxx xxxx
The name of the parameter. Users, records, or fields.
Severity: 5 yyyy
The maximum number of users, records, or fields.
Explanation: Only 94 items may be input in this parameter.
Severity: 5
System action: None.
Explanation: The maximum yyyy for xxxx was exceeded.
User response: Do the following:
System action: None.
1. Correct the parameter by reducing the number of items in
the parameter. User response: Do the following:
2. Rerun SIP stage I. 1. Make the necessary corrections.
2. Rerun SIP stage I.
GLO002 xxxx OPERAND IGNORED-VALID ONLY IF
yyyy=YES
GLS003 TYPE=FLD, BASE=x AND COMMON=y
Where: COMMON RESET TO z
xxxx Where:
The keyword that was ignored.
x The value for BASE (for example, Y or A).
yyyy
y The value for COMMON (for example, YES or NO).
The name of the parameter.
Severity: 0
Severity: 0
Explanation: When TYPE=FLD and BASE=Y then COMMON
Explanation: The keyword referenced in the message should
must equal YES. When TYPE=FLD and BASE=A, then
only be coded if yyyy=YES was specified.
COMMON must equal NO.
System action: None.
System action: The system initialization program (SIP) reset
User response: Do one of the following: COMMON to the correct value.
v If the keyword is required, code yyyy=YES and rerun SIP User response: Do one of the following:
stage I.
v If the reset is correct, there is no action to take.
v If the reset is not correct, correct the BASE or TYPE value read from. GTSZ cannot determine file sizes unless it can read
and rerun SIP stage I. the PDS.
GTSZ0001T CANNOT OPEN OUTPUT FILE filename System action: Processing continues normally.
User response: Rerun GTSZ after the file can be opened for IOD0–IPTS
writing.
See TPF System Generation for more information on GTSZ. IOD006 NUMBER OF 37X5S PLUS THE NUMBER
OF SCTCS EXCEEDS TABLE SIZE OF xxx –
ENTRY IGNORED
GTSZ0003T READING THE PDS DIRECTORY FOR
directory HAS FAILED. Where:
directory Severity: 5
name of the PDS directory
Explanation: The system initialization program (SIP) contains
Explanation: The PDS referenced in the message could not be a table of 37x5 and SCTC addresses with space for the number
336 TPF Messages (System Error, Offline, and Program Status Word)
IOD008 • IOD018
entries indicated in the message. The table is full. User response: Do the following:
User response: Do the following: IOD018 THE dev ADDRESS yyyy WILL DUPLICATE
1. Correct the IODEV macro that is in error. THE PREVIOUSLY DEFINED ADDRESS
zzzz
2. Rerun SIP stage I.
Where:
IOD015 DUPLICATE IOADR=xx – IODEV dev The device type that was coded on the DVTYP
IGNORED parameter.
Where: yyyy
The starting address that was coded on the IOADR
xx The value of IOADR.
parameter.
Severity: 5
zzzz
Explanation: An IODEV was already coded with IOADR=xx. The address.
User response: Do the following: Explanation: If all the devices on the string starting at yyyy
were defined, then they would overlay the address of zzzz,
1. Make the necessary corrections.
which was defined by a prior IODEV macro. All IODEV
2. Rerun SIP stage I. device addresses must be unique. Therefore, the current
IODEV macro was ignored.
IOD016 WHEN DVTYP=xxxx – IOADR SHOULD BE Notes:
y HEXADECIMAL DIGITS.
1. For tape, the IOADR parameter defines a string of 16 tape
Where: addresses.
2. For DASD, the IOADR parameter defines a string of eight
xxxx
DASD addresses.
The value for DVTYP.
3. For 37x5, the IOADR parameter defines one 37x5 control
y The number of hexadecimal digits. unit.
Severity: 5 4. For SCTC, the IOADR parameter defines one SNA
channel-to-channel connection.
Explanation: The number of digits specified for the device
address is incorrect for this device type: System action: None.
(xxxx) (y) 1. Eliminate the address overlaps among the IODEV macros.
2. Rerun SIP stage I.
TAPE 2
37X5 4
SCTC 4
DASD 4
System action: None.
IOD019 THE RCSSID PARAMETER IS VALID ONLY IPE00004W EOF READER — NO END CARD
WHEN DVTYP=DASD; PARAMETER WAS
Explanation: There was an EOF on the reader. There is no
IGNORED
end card. This message is sent to a printer.
Severity: 0
System action: An abnormal termination occurs with the
Explanation: The DVTYP parameter specifies the type of abend code of U0004.
device for which the range of addresses is intended. The
Record Cache Subsystem SSID (RCSSID) parameter is used User response: Do the following:
only for a 3990 Record Cache Subsystem attached DASD. 1. Insert the FMT END card.
Therefore, no other device can be specified. 2. Start the job again.
System action: None.
See TPF Database Reference for more information about the
User response: None. The RCSSID coded on the current real-time disk formatter.
IODEV macro is ignored and has no effect on system
generation. However, if a completely clean assembly is
desired, then remove the RCSSID parameter and rerun SIP IPE00005I NO DASD SPECIFIED
stage I.
Explanation: The type of device to be formatted was not
specified. This message is sent to a printer.
IPE00001I INVALID CARD — IGNORED
System action: An abnormal termination occurs with the
Explanation: The input card (FMT, size, or dup field) is not abend code of U0008.
valid. This message is sent to a printer.
User response: Do the following:
System action: An abnormal termination occurs with the 1. Correct the card.
abend code of U0001.
2. Start the job again.
User response: Do the following:
1. Check to see whether FMT, S, L, N, D, 4, or 2 are missing. See TPF Database Reference for more information about the
real-time disk formatter.
2. Correct the card.
3. Start the job again.
IPE00006I ADDRESS NOT DECIMAL
See TPF Operations for more information about the real-time Explanation: The disk address on the input card is not valid.
disk formatter. This message is sent to a printer.
338 TPF Messages (System Error, Offline, and Program Status Word)
IPE00010I • IPTS0001E
IPE00011I DA EXTENT VIOLATED See TPF Database Reference for more information about the
real-time disk formatter.
Explanation: The completion code of this MVS event control
block (ECB) is X'42'. The cylinder and head address are also
shown. IPE00030I VTOC TRACK DO NOT FORMAT
See TPF Database Reference for more information about the filename
real-time disk formatter. The name of the file.
Explanation: An error occurred when the IPTPRT utility
attempted to open a file.
See TPF Transmission Control Protocol/Internet Protocol for more User response: Do the following:
information about the IPTPRT utility. 1. Update the EXEC statement in the JCL for the IPTPRT
utility, and specify a valid parameter for the PARM
parameter.
IPTS0002E ERROR READING FILE filename
2. Run the JCL again.
Where:
340 TPF Messages (System Error, Offline, and Program Status Word)
IPTS0007E • IPTS0012E
IPTS0007E parmvalue NOT VALID; HEXADECIMAL IPTS0010E parmvalue NOT VALID; PROTOCOL
EXPECTED EXPECTED
Where: Where:
parmvalue parmvalue
The specified parameter value. The specified parameter value.
Explanation: The value specified for the TOD parameter in Explanation: The value specified for the PROT parameter in
the job control language (JCL) for the IPTPRT utility is not the job control language (JCL) for the IPTPRT utilitiy is not
valid. This parameter requires a hexadecimal value. valid. This value must be ICMP, IGMP, TCP, or UDP.
System action: The postprocessor request is rejected. System action: The postprocessor request is rejected.
User response: Do the following: User response: Do the following:
1. Update the EXEC statement in the JCL for the IPTPRT 1. Update the EXEC statement in the JCL for the IPTPRT
utility, and specify a valid hexadecimal value for the TOD utility, and specify ICMP, IGMP, TCP, or UDP for the PROT
parameter. parameter.
2. Run the JCL again. 2. Run the JCL again.
See TPF Transmission Control Protocol/Internet Protocol for more See TPF Transmission Control Protocol/Internet Protocol for more
information about the IPTPRT utility. information about the IPTPRT utility.
IPTS0008E parmvalue NOT VALID; IP ADDRESS IPTS0011E parmvalue NOT VALID; TIME EXPECTED IN
EXPECTED HH:MM:SS FORMAT
Where: Where:
parmvalue parmvalue
The specified parameter value. The specified parameter value.
Explanation: The value specified for the DIP or SIP Explanation: The value specified for the TIME parameter in
parameter in the job control language (JCL) for the IPTPRT the job control language (JCL) for the IPTPRT utility is not
utility is not valid. These parameters require an Internet valid.
Protocol (IP) address in dotted decimal form.
System action: The postprocessor request is rejected.
System action: The postprocessor request is rejected.
User response: Do the following:
User response: Do the following: 1. Update the EXEC statement in the JCL for the IPTPRT
1. Update the EXEC statement in the JCL for the IPTPRT utility, and specify a valid value for the TIME parameter.
utility, and specify a valid IP address for the DIP or SIP Ensure the value specified is in the form HH:MM:SS.
parameter. 2. Run the JCL again.
2. Run the JCL again.
See TPF Transmission Control Protocol/Internet Protocol for more
See TPF Transmission Control Protocol/Internet Protocol for more information about the IPTPRT utility.
information about the IPTPRT utility.
System action: The postprocessor request is rejected. User response: Do the following:
1. Update the EXEC statement in the JCL for the IPTPRT
User response: Do the following: utility and specify a valid RC parameter value.
1. Update the EXEC statement in the JCL for the IPTPRT 2. Run the JCL again.
utility, and specify a valid TCP flag for the FLAG
parameter.
See TPF Transmission Control Protocol/Internet Protocol for more
2. Run the JCL again. information about the IPTPRT utility.
IPTS0013E TOO MANY REASON CODES SPECIFIED LIBI0810E INVALID LIBRARY INTERFACE
INSTRUCTION
Explanation: There were too many values specified for the
RC parameter in the job control language (JCL) for the IPTPRT Explanation: A library interface instruction that cannot be
utility. parsed as either a comment or a keyword instruction is
processed by the library interface tool.
System action: The postprocessor request is rejected.
System action: The library interface instruction is ignored
User response: Do the following: and processing continues.
1. Update the EXEC statement in the JCL for the IPTPRT
utility so that a valid number of reason codes is specified. User response: Correct or delete the library interface
instruction that is not valid
2. Run the JCL again.
See TPF Transmission Control Protocol/Internet Protocol for more LIBI0815E DUPLICATE INTERNAL FUNCTION NAME
information about the IPTPRT utility. intfunction
Where:
IPTS0014E READ AND WRITE PARAMETERS ARE
intfunction
MUTUALLY EXCLUSIVE
The duplicated internal function name.
Explanation: The values specified for the PARM parameter in
Explanation: The library interface script being processed
the job control language (JCL) for the IPTPRT utility are not
contains more than 1 valid @libfun library interface instruction
allowed; the READ and WRITE parameters are mutually
that specifies the same internal function name.
exclusive.
System action: The library interface instruction is ignored
System action: The postprocessor request is rejected.
and processing continues.
User response: Do the following:
User response: Do the following:
1. Update the EXEC statement in the JCL for the IPTPRT
1. Determine if the internal function names are correct.
utility so that either the READ or WRITE parameter (or
neither) is specified. 2. Correct any internal function names that are incorrect.
2. Run the JCL again.
LIBI0820E DUPLICATE EXTERNAL FUNCTION NAME
See TPF Transmission Control Protocol/Internet Protocol for more extfunction
information about the IPTPRT utility.
Where:
extfunction
LIBI–LOG0 The duplicated external function name.
LIBI0802E REQUIRED PARAMETER IS MISSING Explanation: The external function name specified by a
FROM @LIBFUN(plist) @libfun library interface instruction is not a valid C identifier.
342 TPF Messages (System Error, Offline, and Program Status Word)
LIBI0823E • LIBI1250T
intfunction
LIBI1212T WRITE ERROR ON SYSXV
The internal function name that is not valid.
Explanation: An error occurred when attempting to write to
Explanation: The internal function name specified by a
SYSXV. Additional diagnostics may precede this message.
@libfun library interface instruction is not a valid C identifier.
System action: The library interface tool stops running.
System action: The @libfun instruction is ignored and
processing continues. User response: Do the following:
User response: Correct the internal function name. 1. Determine why SYSXV could not be written.
2. Correct the error.
LIBI0823E FUNCTION ORDINAL NUMBER fordinal IS
ALREADY ASSIGNED TO extfunction LIBI1213T WRITE ERROR ON SYSCLS
Where: Explanation: An error occurred when attempting to write to
SYSCLS. Additional diagnostics may precede this message.
fordinal
The multiple-assigned function ordinal number. System action: The library interface tool stops running.
extfunction User response: Do the following:
The external name of the function to which the ordinal 1. Determine why SYSCLS could not be written.
number was previously assigned.
2. Correct the error.
Explanation: The library interface script being processed
contains more than 1 valid @libfun library interface instruction
that specifies the same function ordinal number. LIBI1215T FCLOSE ERROR ON SYSXV
System action: The library interface is not created. Explanation: An error occurred while trying to close SYSXV
(LIBVEC file). The partitioned data set (PDS) or the disk may
User response: Correct the library ordinal numbers. be out of space.
LIBI1251T MORE THAN ONE VALID LIBRARY ID LIN002 TPF MUST BE EITHER A TRIBUTARY OR A
INSTRUCTION IS SPECIFIED CONTROL STATION FOR MULTIPOINT
User response: Add the correct library ordinal number or Explanation: The number of BSC lines specified is greater
name. than the number of BSC drops defined.
System action: None.
LIBI1254T INVALID LIBRARY NAME name User response: Do the following
Where: 1. Make the necessary corrections.
name 2. Rerun SIP stage I if the assumption is not valid.
The library name that is not valid.
Explanation: Valid library names are 4 characters long. The LIN007 AT LEAST 1 PARAMETER REQUIRED FOR
first character must be a letter; the other 3 characters can be BSCOP
letters or numbers. Severity: 5
System action: The input file is processed but the library Explanation: You specified the BSCOP keyword and did not
interface is not created and the library interface tool stops specify any keyword parameters in the parameter list.
running.
System action: None.
User response: Correct the library name.
User response: Do the following:
LIBI1260T NO FUNCTIONS ARE SPECIFIED 1. Include the desired parameters in the parameter list or
omit the BSCOP keyword.
Explanation: The library interface script that is being 2. Rerun SIP stage I.
processed does not contain a valid @libfun library interface
instruction.
LIN008 INVALID PARAMETER IN BSCOP — xx
System action: The library interface is not created and the PARAMETER IGNORED
library interface tool stops running.
Where:
User response: Add the correct @libfun library interface
instructions. xx The name of the parameter.
344 TPF Messages (System Error, Offline, and Program Status Word)
LIN009 • MSA002
Severity: 0
LOG003 xxxx, yyyy PARAMETER INVALID DEVICE
Explanation: The parameter referenced in the message is not TYPE
valid in the BSCOP parameter list.
Where:
System action: None.
xxxx
User response: None. The tape name.
yyyy
LIN009 DUPLICATE PARAMETER IN BSCOP — xx The device type parameter.
PARAMETER IGNORED
Severity: 5
Where:
Explanation: The tape device type parameter referenced in
xx The name of the parameter. the message specifies a device type that is not valid.
Explanation: The parameter referenced in the message was User response: Do the following:
entered more than once in the BSCOP parameter list. 1. Make the necessary corrections.
System action: None. 2. Rerun SIP stage I.
Severity: 5 xxxx
The name of the operand.
Explanation: The CT (the TPF system as control station)
parameter was included in the BSCOP parameter list, but the Severity: 5
multipoint (MP) parameter was not specified.
Explanation: The operand referenced in the message is in
System action: None. error.
Severity: 5 MSA0
Explanation: At least one LOGTAPE must be specified.
yyyy
The value to which the parameter must be set. MSA006 WHEN SMP=YES, xxxx SHOULD EQUAL
yyyy
Severity: 0
Where:
Explanation: An application program was specified through
the MSGRTA macro as an SMP-type application program xxxx
(SMP=YES). The parameter indicated in the message is in The parameter that is in error.
direct conflict with this.
yyyy
System action: None. The parameter that was expected.
346 TPF Messages (System Error, Offline, and Program Status Word)
MSA008 • NET013
MSA008 WHEN ASNA=LU62, xxx MUST EQUAL yyy NET008 NUMBER LOAD MODULES AND/OR
xxx has been set to yyy DUMPS TOO LARGE
Where: Severity: 7
xxx RCPL Explanation: The total number of bytes required for the load
module table, the control unit table and dump table is too
yyy EXP
large.
Severity: 0 System action: None.
Explanation: When you select the LU62 option on the ASNA User response: Do the following:
parameter of the MSGRTA macro, you must select the EXP
option on the RCPL parameter. 1. Investigate the following macro and keyword parameters:
System action: Verify that the parameter listed is specified User Macro Keyword Parameter
correctly, and do one of the following: NETWK MAXEP
v If the parameter is specified correctly, there is no further
MAXDP
action to take.
v If the parameter is not specified correctly, change the SUBCH
parameter to correct value. 2. Make the necessary corrections.
3. Rerun SIP stage I.
NET0
NET010 INVALID MAX. OUTPUT SIZE
CALCULATED FROM L70MAXO. DEFAULT
NET003 xxxx NOT SPECIFIED OF TWENTY-381 BYTE BLOCKS SET.
Where: Severity: 0
xxxx
Explanation: None.
The keyword.
System action: None.
Severity: 5
User response: Do the following:
Explanation: The keyword referenced in the message was
omitted. 1. Make the necessary corrections.
2. Rerun SIP stage I if the assumption is not valid.
System action: None.
User response: Do the following:
NET012 NUMBER OF 3705 UNITS INVALID
1. Make the necessary corrections.
Severity: 5
2. Rerun SIP stage I.
Explanation: Either the number of 3705 units is greater than
8 or it is greater than the value coded on the NETWK macro
NET006 yyyy ITEM x SPECIFIES INCORRECT
N2703 parameter.
ADAPTOR TYPE, ONLY 1 OR 4 IS VALID
System action: None.
Where:
User response: Do the following:
yyyy
The parameter. 1. Make the necessary corrections.
2. Rerun SIP stage I.
x The item by which the parameter is indexed.
Severity: 5
NET013 DUPLICATE ENTRY (yyyy) IN xxxx
Explanation: The parameter referenced in the message ADDRESS TABLE
indexed by the item indicated has a channel adapter specified
Where:
that is not correct. The valid types are 1 or 4.
yyyy
System action: None.
The duplicate entry.
User response: Do the following:
xxxx
1. Make the necessary corrections. The address table.
2. Rerun SIP stage I.
Severity: 5
Explanation: There is a duplicate entry in the address table.
System action: None.
2. Rerun SIP stage I. 2. If the problem continues, check for a hardware problem.
yyyy Where:
The parameter.
dataset
Severity: 5 The name of the data set or member.
Explanation: The address is not valid because either: Explanation: A critical input/output (I/O) error was
v It had more than two characters encountered while trying to write to the data set or member.
v It contained hexadecimal characters that are not valid. System action: The E-type loader offline job is aborted and
the C language run-time library issues a message to indicate
System action: None. the reason for the error.
User response: Do the following: User response: Do the following:
1. Make the necessary corrections. 1. Refer to the message that was issued by the C language
2. Rerun SIP stage I. run-time library for information about the error.
2. If the problem continues, check for a hardware problem.
OLDR–ONL0 See TPF System Installation Support Reference for more
information.
OLDR0001T COLR_OPEN_ERROR: UNABLE TO OPEN
dataset — JOB ABORTED
OLDR0004T COLR_OBJECT_ERROR: READ ERROR —
Where: OBJECT MODULE modname — JOB
ABORTED
dataset
The name of the data set or member. Where:
OLDR0002T COLR_READ_ERROR: UNABLE TO See TPF System Installation Support Reference for more
READ/SEEK dataset — JOB ABORTED information.
Where:
OLDR0004E COLR_OBJECT_ERROR: READ ERROR —
dataset OBJECT MODULE modname — LOADSET
The name of the data set or member. IGNORED
Explanation: A critical input/output (I/O) error was Where:
encountered while trying to read or seek the data set or
member. modname
The name of the object module.
System action: The E-type loader offline job is aborted and
the C language run-time library issues a message to indicate Explanation: A critical input/output (I/O) error was
the reason for the error. encountered while trying to read the object module that is
currently being processed.
User response: Do the following:
1. Refer to the message that was issued by the C language System action: The loadset that is currently being processed
run-time library for information about the error. by the E-type loader offline job is rejected.
348 TPF Messages (System Error, Offline, and Program Status Word)
OLDR0005T • OLDR0007T
User response: Do the following: System action: The E-type loader offline job is aborted and
1. Determine the cause of the error for the object module. the C language run-time library issues a message to indicate
the reason for the error.
2. Correct the error.
User response: Do the following:
See TPF System Installation Support Reference for more 1. Run the system allocator offline utility (SALO) again to
information. generate a new program allocation table (PAT) and a new
system allocator (SAL) table.
OLDR0005T COLR_OBJECT_ERROR: PREMATURE EOF 2. Refer to the message that was issued by the C language
IN modname — JOB ABORTED run-time library for information about the error.
Explanation: A premature end-of-file (EOF) was encountered OLDR0006E COLR_OBJECT_ERROR: OBJECT MODULE
in the object module that is currently being processed. modname IS GREATER THAN ITS
MAXIMUM PERMITTED SIZE — LOADSET
System action: The E-type loader offline job is aborted and IGNORED
the C language run-time library issues a message to indicate
the reason for the error. Where:
OLDR0008T OLDR_ERASE_FOM: FINAL OUTPUT System action: The E-type loader offline job is ended.
MEDIA HAS NO VALID LOADSETS AND User response: Do the following:
HAS NO COMPACTED PAT — MEDIA
DELETED 1. Place the subsystem ID card first in the input load deck.
2. Submit the job again.
Explanation: The E-type loader offline job determined that
the final output media would not contain a compacted
See TPF System Installation Support Reference for more
program allocation table (PAT) or any programs or loadsets.
information.
System action: The final output media is deleted to prevent
it from being used during an online load.
OLDR0012T COLR_OBTAIN_PAT_VERSION: INVALID
User response: Do the following: PATVERS= CARD — JOB ENDED
1. Refer to the output report to determine which loadsets Explanation: The syntax of the program allocator table (PAT)
caused the error and correct the problem. card is not correct. The program version can contain 1 or 2
2. Correct any errors in the input load deck. uppercase alphanumeric characters.
User response: Do the following: System action: The E-type loader offline job is ended.
1. Increase the region size of the job in the JCL. User response: Do the following:
2. Submit the job again. 1. Correct the syntax of the SAL card.
2. Submit the job again.
See TPF System Installation Support Reference for more
information.
See TPF System Installation Support Reference for more
information.
350 TPF Messages (System Error, Offline, and Program Status Word)
OLDR0015T • OLDR0021E
System action: The E-type loader offline job is ended. User response: Do the following:
1. Ensure that the loadset name specified on the Loadset card System action: The previous loadset is rejected.
contains between 5 and 8 alphanumeric characters.
User response: Do the following:
2. Run the job again.
1. Correct the input cards in the input load deck.
See TPF System Installation Support Reference for more 2. Submit the job again, if necessary.
information.
See TPF System Installation Support Reference for more
information.
OLDR0022E OLDR_VALIDATE_LOADSET_CARD: lsname
IS LESS THAN 5 CHARACTERS —
LOADSET IGNORED OLDR0030E COLR_PROCESS_PROGRAM:
progname_version KEYPOINT CANNOT BE
Where: LOADED — LOADSET IGNORED
lsname Where:
The name of the loadset.
progname_version
Explanation: The loadset name specified on the loadset card The name and version of the program.
contains less than 5 characters.
Explanation: The program currently being processed by the
System action: The loadset is rejected. E-type loader offline job is actually a keypoint and cannot be
User response: Do the following: loaded by the E-type loader.
1. Ensure that the loadset name specified on the Loadset card System action: The loadset is rejected.
contains between 5 and 8 alphanumeric characters.
User response: Do the following:
2. Run the job again.
1. Remove the call program card of the keypoint from the
input load deck.
See TPF System Installation Support Reference for more
information. 2. Submit the job again.
3. Use the auxiliary loader to load the keypoint.
OLDR0023E OLDR_CHECK_FOR_DUP_LOADSET:
See TPF System Installation Support Reference for more
DUPLICATE OF LOADSET lsname
information.
ALREADY EXISTS — PRIOR LOADSET
IGNORED
OLDR0031E COLR_PROCESS_PROGRAM:
Where:
progname_version IS A DRIVER PROGRAM,
lsname CANNOT BE LOADED — LOADSET
The name of the loadset. IGNORED
See TPF System Installation Support Reference for more 2. Submit the job again.
information.
See TPF System Installation Support Reference for more
information.
OLDR0024E OLDR_CHECK_FOR_EMPTY_LOADSET:
LOADSET lsname IS EMPTY — LOADSET
IGNORED OLDR0032E COLR_VALIDATE_PROGRAM_CARD:
INVALID CARD SYNTAX — LOADSET
Where: IGNORED
lsname Explanation: The current call program card does not contain
The name of the loadset. a blank character in the proper column.
Explanation: The Loadset card that was previously processed System action: The loadset is rejected.
by the E-type loader offline job was not followed by any call
program cards. User response: Do the following:
352 TPF Messages (System Error, Offline, and Program Status Word)
OLDR0033E • OLDR0037E
Where:
OLDR0036E COLR_PROCESS_PROGRAM_OBJMOD:
progname_version progname_version OBJECT MODULE NOT
The name and version of the program. FOUND OR COULD NOT BE OPENED —
Explanation: The program name and version specified on the LOADSET IGNORED
current call program card is not valid for one or more of the Where:
following reasons:
v The program name must contain uppercased alphanumeric progname_version
characters. The name and version of the program.
v The program name must contain 4 characters and the Explanation: One of the following errors occurred:
program version must contain 2 characters. v The program specified on the current call program card
v The program name must begin with an alphabetic character. could not be found in the object libraries.
System action: The loadset is rejected. v The program specified on the current call program card was
found but could not be opened.
User response: Do the following: v The blank characters on the call program card are not
1. Correct the call program card. specified in the correct places.
2. Submit the job again. System action: The loadset is rejected.
See TPF System Installation Support Reference for more User response: Do the following:
information. 1. Assemble the program again.
2. Submit the job again.
OLDR0034E COLR_VALIDATE_PROGRAM_CARD: 3. Check for a hardware error if the problem continues.
progname_version NOT 6 CHARACTERS
LONG — LOADSET IGNORED See TPF System Installation Support Reference for more
Where: information.
progname_version
The name and version of the program. OLDR0037E COLR_PROCESS_PROGRAM_OBJMOD:
progname_version IS GREATER THAN 4K —
Explanation: The program name and version specified on the LOADSET IGNORED
current call program card cannot contain more than six
alphanumeric characters. Where:
2. Assemble the program again. User response: Determine whether the V-type constants
3. Run the job again. should be resolved.
See TPF System Installation Support Reference for more
See TPF System Installation Support Reference for more information.
information.
OLDR0042E COLR_LINK_EDIT_PROGRAM:
OLDR0039E COLR_LINK_EDIT_PROGRAM: INVALID progname_version MAXIMUM # OF VCONS
REQUEST TO LEDT — LOADSET EXCEEDED — LOADSET IGNORED
IGNORED
Where:
Explanation: The request indicator used to call the TPF
linkage editor (LEDT) was not valid. progname_version
The name and version of the program.
System action: The loadset is rejected.
Explanation: The program currently being processed by the
User response: Do the following: E-type loader offline job contains more V-type constants than
1. Ensure that the proper versions of LEDT, OLDR, and the TPF linkage editor (LEDT) is able to process.
COLR were link edited together.
System action: The loadset is rejected.
2. If the problem continues, see your IBM service
representative. User response: Do the following:
1. Determine the cause of the unresolved V-type constants.
See TPF System Installation Support Reference for more 2. Take the appropriate action to correct the error.
information.
See TPF System Installation Support Reference for more
OLDR0040W COLR_LINK_EDIT_sPROGRAM: progname information.
NOT FOUND IN THE SAL TABLE —
PROGRAM LOADED ANYWAY OLDR0043E COLR_LINK_EDIT_PROGRAM:
Where: progname_version IS NOT AN E-TYPE
PROGRAM — LOADSET IGNORED
progname
The name of the program. Where:
354 TPF Messages (System Error, Offline, and Program Status Word)
OLDR0044E • OLDR0048W
See TPF System Installation Support Reference for more System action: The loadset is rejected.
information.
User response: Do the following:
1. Ensure that the begin header of the program is the same as
OLDR0044E COLR_LINK_EDIT_PROGRAM: the name specified on the call program card.
progname_version IS A NON-ZERO
2. Assemble the program again if necessary.
TRANSFER VECTOR — LOADSET
IGNORED 3. Submit the job again.
Explanation: The TPF linkage editor (LEDT) determined that OLDR0047W COLR_LINK_EDIT_PROGRAM:
the program currently being processed by the offline loader progname_version ILLEGAL Z1 VCON
cannot not be loaded by the E-type loader because it is a REFERENCE DETECTED — PROGRAM
transfer vector. Only the parent program can be loaded. LOADED ANYWAY
Explanation: The begin header of the program currently 3. Assemble the program again.
being processed by the E-type loader offline job is different 4. Submit the job again.
from the name specified on the call program card.
See TPF System Installation Support Reference for more System action: The loadset is rejected.
information.
User response: Do the following:
1. Correct the patch card.
OLDR0049E COLR_LINK_EDIT_PROGRAM: code
2. Submit the job again.
UNKNOWN LEDT ERROR OCCURRED —
LOADSET IGNORED
See TPF System Installation Support Reference for more
Where: information.
code
The condition code. OLDR0061E COLR_VALIDATE_PATCH_CARD: PATCH
CARD IS NOT APPLICABLE FOR
Explanation: An unknown condition code was returned from
progname_version — LOADSET IGNORED
the TPF linkage editor (LEDT).
Where:
System action: The loadset is rejected.
progname_version
User response: Do the following:
The name and version of the program.
1. Ensure that the proper versions of the LEDT, OLDR, and
COLR were link edited together. Explanation: The name of the patch card currently being
processed by the E-type loader offline job does not match the
2. If the problem continues, see your IBM service
name of the program currently being patched.
representative.
System action: The loadset is rejected.
See TPF System Installation Support Reference for more
User response: Do the following:
information.
1. Correct the patch card.
2. Submit the job again.
OLDR0050W COLR_CHECK_FOR_DUP_PROGRAMS:
progname HAS ALREADY BEEN
PROCESSED — PRIOR PROGRAM WILL See TPF System Installation Support Reference for more
BE REMOVED information.
Where:
OLDR0062E COLR_VALIDATE_PATCH_CARD: PATCH
progname FOR progname_version DATA FIELDS NOT
The name of the program. HEX — LOADSET IGNORED
Explanation: The program currently being processed by the Where:
E-type loader offline job was previously processed by the
E-type loader offline job for this loadset. progname_version
The name and version of the program being patched.
System action: The program that was previously processed
by the E-type loader offline job is deleted and is replaced with Explanation: The data on the patch card or the starting
the program that is currently being processed by the E-type address fields on the patch card currently being processed by
loader offline job. the E-type loader offline job are not specified in hexadecimal
characters.
User response: Do the following:
System action: The loadset is rejected.
1. Ensure that the proper version of the program is being
loaded. User response: Do the following:
2. Correct the call program cards in the input load deck if 1. Correct the patch card.
necessary. 2. Submit the job again.
3. Submit the job again.
See TPF System Installation Support Reference for more
See TPF System Installation Support Reference for more information.
information.
356 TPF Messages (System Error, Offline, and Program Status Word)
OLDR0064E • OLDR0076E
1. Correct the relative starting address on the patch card. 2. Submit the job again.
2. Submit the job again.
See TPF System Installation Support Reference for more
See TPF System Installation Support Reference for more information.
information.
OLDR0071E OLDR_VERIFY_CARD_SEQUENCE: CARD
OLDR0064E COLR_PATCH_CARD: PATCH FOR OUT OF SEQUENCE — LOADSET
progname_version INSIDE PROGRAM IGNORED
HEADER — LOADSET IGNORED Explanation: One of the following situations occurred:
Where: v The current input card is out of order in the input load
deck. The E-type loader offline job was expecting a call
progname_version program card.
The name and version of the program. v The blank characters on the current input card are not
specified in the correct places.
Explanation: The relative starting address of the area to patch
is within the header of the program being patched. System action: The loadset is rejected.
System action: The loadset is rejected. User response: Do the following:
User response: Do the following: 1. Correct the input cards in the input load deck.
1. Correct the relative starting address on the patch card. 2. Submit the job again.
2. Submit the job again.
See TPF System Installation Support Reference for more
information.
See TPF System Installation Support Reference for more
information.
OLDR0075I COLR_BUILD_COMPACTED_PAT:
IPATversion SUCCESSFULLY PROCESSED
OLDR0065E COLR_PATCH_CARD: PATCH FOR
AND COMPACTED PAT BUILT ON FILE
progname_version BEYOND MAXIMUM
LENGTH OF nnnn BYTES — LOADSET Where:
IGNORED
version
Where: The version of the object module currently being
processed.
progname_version
The name and version of the program being patched Explanation: The program allocator table (PAT) card was
processed successfully by the E-type loader offline job, and the
nnnn
compacted PAT was constructed in a temporary data set.
is the maximum size of the program.
System action: The E-type loader offline job continues to run.
Explanation: The relative starting address of the area to patch
or the number of bytes to patch extends beyond the maximum User response: None.
size of the program.
See TPF System Installation Support Reference for more
System action: The loadset is rejected. information.
User response: Do the following:
1. Correct the relative starting address or the number of bytes OLDR0076E COLR_PROCESS_PROGRAM:
to patch on the patch card. progname_version IS GREATER THAN 4K —
LOADSET IGNORED
2. Submit the job again.
Where:
See TPF System Installation Support Reference for more
progname_version
information.
The name and version of the program.
Explanation: More than 255 REP cards are present in the load xxxxxx
deck for the specified program. The name and version of the load module.
System action: The loadset is rejected. Explanation: The E-type loader (OLDR) tried to load a
program. While processing the program, a record was found
User response: Create a new version of the program so that that was either not valid or was unexpected.
fewer patches have to be applied.
System action: The program is not loaded and processing
continues.
OLDR0080E COLR_PROCESS_LOADMOD: UNABLE TO
LOAD LIBRARY cccccc TO NON-BSS User response: Do the following:
SUBSYSTEM — LOADSET IGNORED 1. Determine why the program was not created correctly.
Where: 2. Build the program again.
cccccc
The name and version of the library. OLDR0084E OLDR_PROCESS_LM: DLM ENTRY POINT
NOT FOUND IN PROGRAM xxxxxx —
Explanation: The specified library was requested to be LOADSET IGNORED
loaded to a nonbasic subsystem (non-BSS). Libraries are only
allowed in the basic subsystem (BSS). Where:
358 TPF Messages (System Error, Offline, and Program Status Word)
OLDR0085E • OLDR0090W
User response: Make sure that the program was built See TPF System Installation Support Reference for more
correctly. information.
User response: If you want a link map for this C load (OLDR) attempted to read an ADATA file for the program
module, do the following: being run.
1. Run the C load module build tool (CBLD) again. System action: The program was loaded without the ADATA
2. Run the offline E-type loader (OLDR) again to pick up the file.
updated version of the C load module.
User response: Do one of the following:
See TPF Application Programming for information about CBLD v If the ADATA file is not required for the program, do
and TPF System Installation Support Reference for information nothing.
about OLDR. v If the ADATA file is required, ensure a valid ADATA file
exists for the program being run and run TPFLDR again.
OLDR0091T OLDR_OBTAIN_STORAGE_AND_START:
See TPF System Installation Support Reference for more
UNABLE TO ALLOCATE STORAGE FOR
information about OLDR.
ADATASIZE - JOB ABORTED
Explanation: The E-type loader (OLDR) tried to get the
OLDR0094W OLDR_CALL_PROCESS_PROGRAM:
amount of storage specified by the ADATASIZE parameter (or
BUFFER ERROR OCCURRED READING
the default amount if the ADATASIZE parameter was not
ADATA FOR PROGRAM progname_version -
specified) and was unable to obtain that amount of storage.
PROGRAM LOADED ANYWAY
System action: Processing ends abnormally.
Where:
User response: Do the following:
progname_version
1. Reduce the amount of storage specified for the The name and version of the program.
ADATASIZE parameter.
Explanation: The E-type loader (OLDR) ran out of storage
2. Run TPFLDR again.
while attempting to load an ADATA file for the program being
run.
See TPF System Installation Support Reference for more
information about OLDR and the ADATASIZE parameter. System action: The program was loaded without the ADATA
file.
nnnnvv
See TPF System Installation Support Reference for more
The name and version of the C load module.
information about OLDR.
Explanation: An error occurred when the E-type loader
360 TPF Messages (System Error, Offline, and Program Status Word)
OLDR0099E • ONL007
See TPF System Installation Support Reference for more ONL007 INPUT DEVICE TYPES DO NOT FORM A
information. CORRECT SERIES
Severity: 5
OLDR1201T COLR_OPEN_ERROR: UNABLE TO OPEN
dataset — JOB ENDED Explanation: When DASD devices are used they must form a
complete series starting with the device type A. (In other
Where: words, if three device types are used, they must be A, B, and
dataset C.)
The name of the data set or member. System action: None.
Explanation: A user-specified dataset member could not be User response: Do the following:
opened.
1. Make the necessary corrections.
System action: The E-type loader offline job is ended and the 2. Rerun SIP stage I.
C language run-time library issues a message to indicate the
reason for the error.
ONL009 NUMBER OF CYLINDERS (y...y) FOR PIUP0052E INVALID NUMBER OF INPUT SEARCH
DEVICEx IS NOT NUMERIC ARGUMENTS
Where:
ONL010 KEYPOINTING MAY NOT OCCUR IF
IPLABLE IS NOT GREATER THAN 1 parameter
The incorrect search argument.
Severity: 5
Explanation: The search argument specified for the PARM
Explanation: This warning is issued if the number of online parameter in the job control language (JCL) for the PIUPRT
device A prime modules is greater than 1, yet IPLABLE is utility contains an incorrect number of characters.
equal to 1. If this is the case then fallback module keypointing
will not occur. System action: The post-processor request is rejected.
PIUP
PIUP0054E SEARCH RANGE IS INVALID: parm1 IS
GREATER THAN parm2
PIUP0051E INVALID INPUT PARAMETER: parameter
Where:
Where:
parm1
parameter Rpresents the value of the first parameter.
Represents the input parameter or formatting keyword.
parm2
Explanation: The value specified for the PARM parameter in Represents the value of the second parameter.
the job control language (JCL) for the PIUPRT utility is not a
valid input parameter or formatting keyword. Explanation: The range specified for the PARM parameter in
the job control language (JCL) for the PIUPRT utility is not
System action: The post-processor request is rejected. correct. You must specify the low end of the range first.
User response: Do the following: System action: The post-processor request is rejected.
1. Update the EXEC statement in the JCL for the PIUPRT
User response: Do the following:
utility, specifying a valid input parameter or formatting
keyword for the PARM parameter. 1. Update the EXEC statement in the JCL for the PIUPRT
utility, specifying the range for the search arguments in the
2. Run the JCL again.
correct format.
2. Run the JCL again.
See TPF ACF/SNA Data Communications Reference for more
information.
See TPF ACF/SNA Data Communications Reference for more
information.
362 TPF Messages (System Error, Offline, and Program Status Word)
PIUP0055E • PIUP0060E
PIUP0055E INVALID CHARACTER ‘char’ IN SEARCH PIUP0058E INVALID TIME ARGUMENT SPECIFIED:
ARGUMENT: parameter parameter
Where: Where:
char parameter
Represents the incorrect character. Represents an incorrect search argument.
See TPF ACF/SNA Data Communications Reference for more User response: When generating a loosely coupled complex
information. with more than eight processors, or once all processors are
running with 32-way loosely coupled processor support and
migration has been completed, set the value of NFBACK to 0.
RAM0–RES0 The fallback extents will be controlled by the #KFBXn
RAMFIL definitions in the FACE table (FCTB).
Where: Where:
xxxx xxxx
The maximum number of defined general MFST slots. The operand.
Severity: 0 yyyy
The normal range that is allowed.
Explanation: The GSON and GFENS parameters reserve
entries in the MFST for general data set and general file Severity: 0
support. However, they add up to an amount greater than the
maximum allowed. It was reset to the maximum. Explanation: The value specified for the operand in the
message is not within the normal range indicated in the
System action: None. message. This is a suspected error.
User response: No action is required since xxxx is the largest System action: None.
number allowed. However, if a smaller number is desired, do
the following: User response: Do the following:
2. Rerun SIP stage I. 2. Rerun SIP stage I if the value specified is in error.
364 TPF Messages (System Error, Offline, and Program Status Word)
SALO0004W • SALO0014E
User response: Ensure that the output data set exists and its SALO0011E INVALID PROGRAM TYPE
LRECL is 12 bytes.
Explanation: The program type coded was not one of the
following:
SALO0006T UNABLE TO OPEN PAT OUTPUT FILE v Core resident (CR)
Explanation: There was an error in opening the program v File resident (FR)
allocation table (PAT) output file (PATOUT). v Transfer vector (TV).
System action: Processing is ended. System action: The statement is ignored.
User response: Ensure that the output data set exists and its User response: Code the program type as CR, FR, or TV.
LRECL is 80 bytes.
SALO0008T NOT ENOUGH PROGRAM RECORDS Explanation: The transfer vector (TV) type statement did not
ALLOCATED have a parent program name coded.
Explanation: The value passed to the system allocator System action: The card is ignored.
(SALO) through the PROG parameter was smaller than the
User response: Code the parent program name following the
number of programs to be allocated in the input deck.
transfer vector (TV) characters.
System action: Processing is ended.
User response: Do the following: SALO0014E INVALID TV PARENT PROGRAM NAME
1. Increase the number of program records (through #PROG1) Explanation: One of the following errors exists in the transfer
allocated in RAMFIL to contain the number of programs vector (TV) parent program name:
being allocated.
v It does not contain an alphabetic character as its first
2. Rerun the FACE table generator. character
3. Rerun SALO with the value specified on the PROG v The last three characters in the parent program name are
parameter equal to the number of #PROG1 records not alphanumeric.
allocated.
System action: The card is ignored.
User response: Code the parent program name correctly.
SALO0015E TV PARENT PROGRAM NAME HAS NOT SALO0020E INVALID SYMBOL DEFINITION NAME
BEEN ALLOCATED
Explanation: The symbol definition name does not have an
Explanation: The parent program name coded was not alphabetic first character or the last two characters are not
allocated. alphanumeric.
System action: The card is ignored. System action: The card is ignored.
User response: Ensure that the parent program name is User response: Code the name correctly.
allocated before any transfer vectors (TVs) that point to that
parent are allocated.
SALO0021E SYMBOL DEFINITION NAME ALREADY
If the parent program allocation card was in error, this DEFINED
message will be issued for all TVs of the parent program.
Explanation: The symbol definition name is already defined.
Explanation: The value coded for the CLASS parameter is User response: Do one of the following:
not one of the following: v Remove the duplicate statement.
v COMMON v Change the symbol definition name.
v SHARED
v ISUNIQ
v UNPROT SALO0022E INVALID SYMBOL DEFINITION TYPE
v PRIVATE.
Explanation: The symbol definition type was not POOL.
System action: The card is ignored.
System action: The card is ignored.
User response: Ensure that the value coded for the CLASS
User response: Code the TYPE parameter with a symbol
parameter is one of the following:
definition type of POOL.
v COMMON
v SHARED
v ISUNIQ SALO0024E VALUE PARAMETER MISSING FROM
v UNPROT POOL DEFINITION STATEMENT
v PRIVATE.
Explanation: The VALUE parameter on a POOL definition
statement is required.
SALO0017E INVALID CLASS FOR CR PROGRAM
System action: The card is ignored.
Explanation: The value coded for the CLASS parameter of a
core resident (CR) program is not SHARED or COMMON. User response: Code the VALUE parameter.
366 TPF Messages (System Error, Offline, and Program Status Word)
SALO0027E • SALO0039T
User response: Code a valid TV number. User response: The parents allocation is incorrect and should
be changed or the parent name coded for the transfer vector is
not correct.
SALO0028E INVALID TV NUMBER
Explanation: The transfer vector (TV) number specified was SALO0035E INVALID POOL SYMBOL DEFINITION
not numeric. VALUE
System action: The card is ignored. Explanation: The value coded does not match one of the
User response: Code a valid TV number. valid values.
System action: The card is ignored.
SALO0029E INVALID PARAMETER SPECIFIED ON User response: None.
INPUT STATEMENT
See TPF System Installation Support Reference for more
Explanation: On a core resident (CR) or file resident (FR) information about valid values.
program allocation statement, additional characters where
found. The following are the only valid parameters:
v CLASS SALO0036E UNDEFINED FUNCTION SWITCH
v OPTIONS
Explanation: The value coded for the FUNC parameter does
v MODE
not exist.
v FUNC
v SS. System action: The card is ignored.
System action: The card is ignored. User response: Code a valid function switch name. The list
of valid names is in c$idfunc.
User response: Remove the characters that are not valid.
SALO0040E PREMATURE END OF FILE SALO0046W xxx= NOT CODED. DEFAULTING TO yyyy.
Explanation: An end of file was reached in the middle of a Where:
continued line.
xxx The name of the parameter.
System action: The card is ignored.
yyyy
User response: Check the last statement in the input file. The The default.
statement should not end with a continuation character.
Explanation: The parameter referenced in the message was
not coded. The default referenced in the message was
SALO0041I CONTENTS OF SAL TABLE — BEGIN assumed.
Explanation: The content of the system allocator table (SAL) System action: None.
is displayed.
User response: Code the parameter again if the default is not
System action: None. acceptable.
list The list of parameters. Explanation: The subsystem name specified for the SS
parameter is not valid.
Explanation: The list of parameters referenced in the message
is picked up by the system allocator (SALO). System action: The statement is ignored.
System action: None. User response: Specify a valid subsystem name for the SS
parameter. The subsystem name can contain between one and
User response: None. four characters.
SALO0044W xxx= PARAMETER CODED MORE THAN SALO0049E PRELOAD INCOMPATIBLE WITH FR
ONCE. ADDITIONAL CODINGS IGNORED
Explanation: The PRELOAD parameter is valid only for core
Where: resident programs.
xxx The name of the parameter. System action: The statement is ignored.
Explanation: The parameter referenced in the message was User response: Do one of the following:
coded more than once.
v Change the program characteristics to core resident.
System action: None. v Remove the PRELOAD parameter from the allocation input
statement in the SALO input deck.
User response: Remove the extraneous parameters.
368 TPF Messages (System Error, Offline, and Program Status Word)
SALO0052T • SSD007
Explanation: The program being allocated has the same SSD005 SSNAME PARAMETER (xxx) INVALID,
name as a previous program that was allocated as a dummy NAME RESERVED FOR SYSTEM USE
program.
Where:
System action: None.
xxx The parameter name.
User response: If the warning is acceptable to you, there is
Severity: 5
nothing further to do.
Explanation: None.
Otherwise, you must change the current program name so
that it is unique. System action: None.
User response: Do the following:
SSD001 THE SUM OF THE SSUIDS CODED (xxx)
1. Correct the SSNAME parameter.
EXCEEDS THE MAXIMUM ALLOWED (yyy)
2. Rerun SIP stage I.
Where:
xxx The total number of subsystem user IDs (SSUIDs). SSD006 BASIC SUBSYSTEM GENERATION
INDICATED BUT SSNAME NOT ‘BSS’.
yyy The maximum number of SSUIDs allowed.
SSNAME SET TO ‘BSS’.
Severity: 5
Severity: 0
Explanation: The total number of subsystem user IDs defined
Explanation: The BSSGEN parameter is equal to YES
and specified in the SSUID1 through the SSUID4 parameter
indicating that a basic subsystem generation is required, but
exceeds the maximum allowed.
the subsystem name is not BSS as required. The system
System action: None. initialization program (SIP) reset the subsystem name to BSS.
System action: None. v If the action taken by the macro is satisfactory, then no
further action is necessary.
User response: Do the following: v If the action taken by the macro is not satisfactory, correct
1. Correct the duplicate subsystem user name. the SSNAME parameter. Then, rerun SIP stage I.
zzzz
STA001 xxxx PARAMETER OF yyyy MACRO IS
The type of environment.
OMITTED OR INVALID
jjjj The assumed default.
Where:
Severity: 0
xxxx
The parameter name. Explanation: The parameter of the macro referenced in the
message was omitted or contains data that is not valid in the
yyyy
environment indicated. The assumed default is jjjj.
The macro name.
System action: None.
Severity: 5
User response: Do the following:
Explanation: The parameter of the macro referenced in the
message was omitted or contains data that is not valid. 1. Make the necessary corrections.
2. Rerun SIP stage I if the assumption is not valid.
System action: None.
User response: Do the following: See TPF System Macros or TPF General Macros (whichever book
1. Make the necessary corrections. is appropriate for the macro referenced in the message) for
more information.
2. Rerun SIP stage I.
See TPF System Macros or TPF General Macros (whichever book STA004 xxxx PARAMETER OF THE yyyy MACRO IS
is appropriate for the macro referenced in the message) for OMITTED OR INVALID IN A zzzz
more information. ENVIRONMENT.
Where:
STA002 xxxx PARAMETER OF yyyy MACRO IS
xxxx
OMITTED OR INVALID. ASSUMED
The parameter name.
DEFAULT IS zzzz
yyyy
Where:
The macro name.
xxxx
zzzz
The parameter name.
The type of environment.
yyyy
Severity: 5
The macro name.
Explanation: None.
zzzz
The assume default. System action: None.
Severity: 0 User response: None.
Explanation: The parameter of the macro referenced in the See TPF System Macros or TPF General Macros (whichever book
message was omitted or contains data that is not valid. The is appropriate for the macro referenced in the message) for
assumed default is zzzz. more information.
System action: None.
STA005 xxxx PARAMETER OF THE yyyy MACRO IS
User response: Do the following:
EXTRANEOUS IN A zzzz ENVIRONMENT
1. Make the necessary corrections.
Where:
2. Rerun SIP stage I if the assumption is not valid.
xxxx
See TPF System Macros or TPF General Macros (whichever book The parameter name.
is appropriate for the macro referenced in the message) for
yyyy
more information.
The macro name.
zzzz
STA003 xxxx PARAMETER OF yyyy MACRO IS
The type of environment.
OMITTED OR INVALID IN A zzzz
ENVIRONMENT. ASSUMED DEFAULT IS Severity: 0
jjjj
Explanation: When an environment such as the one
Where: referenced in the message exists, the functions or information
provided by the parameter referenced in the message is not
xxxx
needed.
The parameter name.
System action: The parameter is ignored.
yyyy
The macro name. User response: None.
See TPF System Macros or TPF General Macros (whichever book
370 TPF Messages (System Error, Offline, and Program Status Word)
STA006 • STA010
User response: In general, recode the parameter or User response: Do the following:
parameters that are at fault and rerun SIP stage I. 1. Make the necessary corrections.
However, keep the following in mind: 2. Rerun SIP stage I.
v If the error occurred in the GENSIP macro, then the VSN
coded for VOLNLGF is incorrect. See TPF System Macros or TPF General Macros (whichever book
is appropriate for the macro referenced in the message) for
v If the error occurred in the LOGCAP macro, then one or
more information.
more of the RTx parameters has a starting or ending range
that is out of bounds.
v If the error occurred in the ONLFIL macro, then there is a STA009 xxxx PARAMETER OF yyyy HAS AN
problem with VSN ranges calculated from the VOLNOx EXCESSIVE NUMBER OF
parameters. SUBPARAMETERS. THE MAXIMUM
ALLOWED IS: zzzz
v If the error occurred in the DDCCAP macro, then one or
more of the subranges on an INTxP or INTxN parameter is Where:
not valid.
xxxx
The parameter name.
STA007 xxxx PARAMETER OF yyyy MACRO IS NOT
zzzz. yyyy
The macro name.
Where:
zzzz
xxxx The maximum subparameters allowed.
The name of the parameter.
Severity: 5
yyyy
The name of the macro. Explanation: The parameter of the macro referenced in the
message has too many subparameters. The maximum
zzzz subparameters allowed is indicated in the message.
A quality or a requirement.
System action: None.
Severity: 7
User response: Do the following:
Explanation: The parameter of the macro referenced in the 1. Make the necessary corrections.
message is not the proper quality or requirement.
2. Rerun SIP stage I.
System action: None.
User response: Do the following: See TPF System Macros or TPF General Macros (whichever book
is appropriate for the macro referenced in the message) for
1. Recode the parameter. more information about coding the parameter.
2. Rerun SIP stage I.
System action: None. Explanation: The value coded for the macro referenced in the
message is not valid.
User response: Do the following:
1. Make the necessary corrections. System action: None.
2. Rerun SIP stage I if the truncation is not acceptable. User response: Do the following:
1. Recode the parameter.
STA011 xxxx PARAMETER OF yyyy MACRO MUST 2. Rerun SIP stage I.
BE NUMERIC AND GREATER THAN
ZERO. See TPF System Macros or TPF General Macros (whichever book
is appropriate for the macro referenced in the message) for a
Where:
list of correct values.
xxxx
The parameter name.
STA014 vvvv IS OUTSIDE RANGE wwww-xxxx IN
yyyy MACRO yyyy. ASSUMED DEFAULT IS zz
The macro name.
Where:
Severity: 5
vvvv
Explanation: The parameter of the macro referenced in the The parameter name.
message was coded as a 0 or contained non-numeric
wwww-xxxx
characters.
Defines the boundaries of a range that the parameter is
System action: None. not within.
Severity: 0
STA012 xxxx PARAMETER OF yyyy MACRO FOR
Explanation: The parameter referenced in the message is
THE zzzz APPL IS NOT APPROPRIATE
outside the acceptable range for the macro. Therefore, the
Where: value of the parameter was reset to the value indicated in the
message.
xxxx
The parameter name. System action: None.
372 TPF Messages (System Error, Offline, and Program Status Word)
STPP0001E • STPP0007T
See TPF Program Development Support Reference for more Explanation: An end-of-file was unexpectedly encountered
information about the diagnostic output formatter. while postprocessing a tape, before any data records were
read. This message is sent to the printer only.
Where:
SYN002 AILST EQUALS INPUT, AIRTE IGNORED
pgmn
The 4-character stub name. Severity: 0
Explanation: An error was found while attempting to create Explanation: If AILST=INPUT, then AIRTE is not required.
the stub on file. There is a problem with the SYSOUT output System action: None.
file.
User response: None.
System action: No stub is generated and processing
continues.
374 TPF Messages (System Error, Offline, and Program Status Word)
SYN003 • TLDR0210T
SYN003 NPOOL OPERAND xxxx NOT A MULTIPLE SYN007 xxxx ROUTING TABLE FORMAT INVALID
OF 8
Where:
Where:
xxxx
xxxx The routing table that is not valid.
The value that is not valid in the operand.
Error Message: 5
Severity: 5
Explanation: The routing table:
Explanation: None. v Does not contain 5 or 6 fields
System action: None. v Has a required field omitted.
Explanation: In the EXEC PGM line of the loader JCL, ALDR, TPFL0007W PATH NAME pathname CANNOT BE
or OLDR was specified after TLDR had already been specified.
REDEFINED - EARLIER DEFINITION WILL
You can specify only 1 loader.
BE USED
System action: The program ignores the parameter and
Where:
processing continues.
pathname
User response: Correct the JCL.
The path name specified on the Path card.
Explanation: The path name was already defined.
TPFL0003W ALDR ALREADY SPECIFIED
System action: The Path card is ignored.
Explanation: In the EXEC PGM line of the loader JCL, TLDR,
or OLDR was specified after ALDR had already been User response: Do the following:
specified. You can specify only 1 loader. 1. Ensure that the Path card used specifies the correct search
System action: The program ignores the parameter and path. If necessary, correct the path name.
processing continues. 2. Run the offline loader (TPFLDR) again.
376 TPF Messages (System Error, Offline, and Program Status Word)
TPFL0010E • TPFL2004T
System action: The TRACE parameter is ignored. No trace Explanation: The IEWBIND macro returned an error code to
data will be generated. TPFLDR while processing the FACE table (FCTB) as a
program object.
User response: If you want trace data for your TPFLDR job,
do the following: System action: TPFLDR processing ends abnormally.
1. Correct the TRACE parameter specification on the LOAD User response: See OS/390 DFSMS Program Management for
card of the TPFLDR job. more information about return code and reason code values.
2. Run TPFLDR (this can be the E-type (OLDR), auxiliary See your system programmer for additional help.
(TLDR), or general file loader (ALDR)) again.
TPFL2003T PATH NAME pathname NOT DEFINED -
See TPF System Installation Support Reference for information UNABLE TO LOAD FCTB
about loaders.
Where:
Explanation: The offline loader was unable to open the Explanation: A Load FCTB card specified a search path name
ADATAIN data definition name, which specifies data sets that that was not previously defined by a Path card in the load
contain ADATA files. deck.
System action: ADATA files will not be loaded for real-time System action: Offline loader (TPFLDR) processing ends
programs. abnormally.
See TPF System Installation Support Reference for more See TPF System Installation Support Reference for more
information about the ADATAIN data definition card. information about TPFLDR.
TPFL2001T UNABLE TO OBTAIN STORAGE FOR TPFL2004T FCTB vv NOT FOUND IN PATH NAME
PROCESSING FCTB AS A PROGRAM pathname - UNABLE TO LOAD FCTB
OBJECT
Where:
Explanation: An error occurred when the offline loader
vv The FACE table (FCTB) version code specified on the
(TPFLDR) attempted to obtain storage for processing the
Load FCTB card.
FACE table (FCTB) as a program object.
pathname
System action: TPFLDR processing ends abnormally.
The path name specified on the Load FCTB card.
User response: Do the following:
Explanation: The FCTB could not be found in the hierarchical
1. Increase the REGION size in the JCL that is used to run file system (HFS) search path specified by the path name in
TPFLDR. the Load FCTB card.
2. Run the job again.
System action: Offline loader (TPFLDR) processing ends
abnormally.
See TPF System Installation Support Reference for more
information about TPFLDR. User response: Do the following:
1. Update the Path card in the load deck so that the directory System action: None.
containing the FCTB is included in the search path.
User response: Do the following:
2. Run TPFLDR again.
1. Make the necessary corrections.
See TPF System Installation Support Reference for more 2. Rerun SIP stage I.
information about TPFLDR.
USER ABEND 1111
TPFL2005T FCTB vv IN PATH NAME pathname Explanation: This is an input parameter error that can occur
EXCEEDS BUFFER SIZE - UNABLE TO when you specify TV or RS in the JCL EXEC statement.
LOAD FCTB
System action: None.
Where:
User response: To receive standard MVS dumps for all
vv The FACE table (FCTB) version code specified on the ABENDs, code the SYSUDUMP or SYSABEND data definition
Load FCTB card. cards for the JCL; for example://SYSUDUMP DD SYSOUT=A.
pathname See TPF Operations for more information about specifying
The path name specified on the Load FCTB card. diagnostic output formatter (DOF) options in the JCL EXEC
Explanation: The FCTB is larger than the buffer allocated by statement.
the offline loader (TPFLDR).
User response: Do the following: Explanation: This is an input parameter error that can occur
when you specify whether or not you want STPP options (Y
1. Increase the buffer size specified by the BUFSIZE
or N) in the JCL EXEC statement.
parameter.
2. Run TPFLDR again. System action: None.
Explanation: A symbolic number greater than 3 was used for See TPF Program Development Support Reference for more
a card reader information about the RTT system utility. See TPF Operations
378 TPF Messages (System Error, Offline, and Program Status Word)
USER ABEND 2222 • VAGE0001E
SYSADATA file that is generated for use by the TPF v If the ADATA file name specified does not exist, ensure that
debugger. Use the online loader to load this file to the the directory is writable by using the Is command:
TPF system. mvs:>ls -al
total 3616
events drwxr-xr-x 2 TPFUSER TASKS 8192 Nov 6 13:01 ./
The name of the event log that will be created by the drwxr-xr-x 43 TPFUSER TASKS 8192 Nov 6 09:16 ../
-rw-r--r-- 1 TPFUSER TASKS 1668151 Nov 6 6 13:01 sysadata.bin
TPFSYM offline program.
exclusion_file
VAGE0004W UNABLE TO OPEN EVENT LOG
The full path to the common symbol table.
Explanation: An error occurred because an incorrect value
source_path
was specified for the -e events parameter when the TPFSYM
The full path of the original assembler source file.
offline program was entered to create an event log.
Explanation: An error occurred because the TPFSYM offline
System action: The TPFSYM offline program continues
program was entered with incorrect parameters or no
processing, but does not create an event log.
parameters specified.
User response: Do the following:
System action: The TPFSYM offline program exits.
1. Verify that you need an event log.
User response: Enter the TPFSYM offline program again with
2. If the event log is not needed, do not specify the -e events
the correct parameters specified.
parameter when the TPFSYM offline program is entered.
VAGE0003E UNABLE TO OPEN THE ADATA FILE VAGE0008W UNABLE TO PROCESS EXCLUSION FILE
Explanation: An error occurred because the name of the Explanation: The TPFSYM offline program was entered with
ADATA file specified when the TPFSYM offline program was an exclusion file specified that was not generated when
entered was not valid. TPFSYM was processed previously.
System action: The TPFSYM offline program exits. System action: The TPFSYM offline program continues
User response: Do one of the following: processing, but does not exclude data macros (DSECTs) or
symbols defined in the common symbol table and saved in the
v Verify that the ADATA file name specified is accessible. For
ADATA file that is generated for use by the TPF debugger.
example, if you specified -a adata.bin, adata.bin must be
listed as accessible in the current directory. This is verified User response: Do the following:
by using the Is command. 1. Verify that the exclusion file name specified is valid.
380 TPF Messages (System Error, Offline, and Program Status Word)
VAGE0009E • VAGE0015E
2. If the exclusion file name is valid, verify that it was 1. Verify that the file name specified for the -e events
generated previously by using the TPFSYM offline parameter exists and is not locked.
program to generate an ADATA file for the UCST segment. 2. Correct the error.
3. Enter the TPFSYM offline program again with a valid 3. Enter the TPFSYM offline program again.
exclusion file name specified.
Explanation: A memory allocation error occurred in the User response: Do the following:
function referenced at the memory allocation interval 1. Verify that the format of the -s sysadata parameter is
indicated. If no memory allocation interval is provided in the correct.
message, the error occurred at the only instance of memory 2. Enter the TPFSYM offline program again and use the
allocation. correct format.
System action: The TPFSYM offline program exits.
Explanation: An error occurred while processing a 3. If the problem continues, see your IBM service
SYSADATA record. representative, and provide the assembler source code used
and the SYSADATA file that was generated.
System action: The TPFSYM offline program exits.
VAGE0011E UNABLE TO CLOSE SYSADATA FILE Explanation: An error occurred at the occurrence interval
referenced for the call to the dwarf_init function in the
Explanation: An error occurred while closing the SYSADATA function referenced in the message. If no occurrence interval is
file. indicated, the error occurred at the only instance of a
System action: The TPFSYM offline program exits. dwarf_init call in that function.
User response: Do the following: System action: The TPFSYM offline program exits.
1. Verify that the file name specified for the -s sysadata User response: Do the following:
parameter exists and is not locked. 1. Verify that the format of the -x exclusion_file parameter is
2. Correct the error. correct.
3. Enter the TPFSYM offline program again. 2. Create the exclusion file again using the common symbol
table (UCST) assemble.
VAGE0012E UNABLE TO CLOSE EVENT LOG 3. Enter the TPFSYM offline program again.
4. If the problem continues, see your IBM service
Explanation: An error occurred while closing the event log representative, and provide the assembler source code
file. used, the current version of the UCST, and the SYSADATA
System action: The TPFSYM offline program exits. file that was generated.
382 TPF Messages (System Error, Offline, and Program Status Word)
VAGE0022I • ZZZ006
1. Verify that the format of the -s sysadata parameter is 2. Update the GENSIP macro source code to correct the
correct. parameter that is in error, if the default value provided is
2. Enter the TPFSYM offline program again and use the not correct. Then, continue with step 3.
correct format. If the default value is acceptable, no further action is
3. If the problem continues, see your IBM service required.
representative, and provide the assembler source code used 3. Rerun SIP stage I.
and the SYSADATA file that was generated.
User response: Load the ADATA file that is generated to the System action: None.
TPF system by using the online loader.
User response: Do the following:
1. Make the necessary corrections.
ZZZ0 2. Rerun SIP stage I.
xxxx
The program name. ZZZ016 LIST OPERAND xxxx CONTAINS MORE
THAN 6 SUBOPERANDS
Severity: 7
Where:
Explanation: The program that is not valid was specified in a
SPPBLD macro call. A real-time or keypoint program name xxxx
must be 6 characters in length. The operand.
v If the program name was only misspelled, locate the System action: None.
SPPBLD macro in SPPGML to correct the misspelling. Then,
User response: Do the following:
rerun SIP Stage I.
1. Locate the RANGE macro instruction in the DDCCAP
v If the program name is not a 6 character name, rename the
macro.
program and change the program name in the SPPBLD
macro call. Then, rerun SIP stage I. 2. Make the necessary corrections.
3. Rerun SIP stage I.
ZZZ012 xxxx PGM LIST OVERFLOW, INCREASE
DIMENSION yyyy AND SET zzzz to THAT ZZZ017 LIST OPERAND MISSING
VALUE
Severity: 7
Where:
Explanation: The RANGE macro called by the DDCCAP
xxxx macro did not contain a LIST operand that is required.
The program type.
System action: None.
yyyy
The global variable symbol. User response: Do the following:
1. Locate the RANGE macro in the DDCCAP macro.
zzzz
The value of the global variable. 2. Make the necessary corrections.
3. Rerun SIP stage I.
Severity: 7
Explanation: The error occurred in the SPPBLD macro calls
ZZZ018 FLD AND/OR TYPE PARAMETER MISSING
of SPPGML. Table space was exhausted for the program types
OR INVALID IN SPRANG MACRO
referenced in the message.
Severity: 7
System action: None.
Explanation: None.
User response: Do the following:
1. Increase the dimension of the global variable symbol in the System action: None.
SPGLB macro.
User response: Do the following:
2. Set the variable symbol in the SPTABS macro to the global
1. Locate the SPRANG macro instruction.
variable symbol dimension.
384 TPF Messages (System Error, Offline, and Program Status Word)
ZZZ019 • 000000000
xxxx TSIO
The type that is not valid. The SIO/SIOF failure.
Severity: 7 TPRD
The read or read backward operation failure.
Explanation: None.
TWRT
System action: None. The write operation failure.
User response: Do the following: TCTL
1. Locate the SPASM/SPASMS macro. The control operation failure.
2. Make the necessary corrections. nnnn
3. Rerun SIP stage I. The subsystem user (SSU) name or basic subsystem
name.
ZZZ020 SKIP-SWITCH TABLE CAPACITY ttt The symbolic tape name, such as RTL.
EXCEEDED
cuu The device address. When two paths are defined for the
Severity: 7 drive, the address given is that used for the failing
operation.
Explanation: The &XBSKIP table deals with the EXPRS
parameter of the GENSIP macro. A value greater than the x The SIO condition code. When a deferred SIOF condition
length of this table is being referenced. code occurs the deferred condition code is given.
System action: None. cc The failing channel command. When a data chained
channel program specified through the TDCTC macro
User response: Do the following: fails, the operation code given is that of the first CCW in
1. Update the size of the table. the chain.
2. Rerun SIP stage I. yyyyyyyy
The channel status word (CSW). This is the CSW
associated with the error. For the SIO condition code 3
ZZZ021 PARAMETER xxxx IS NOT VALID FOR
(not operational), the CSW is not meaningful and is not
yyyyyy MACRO WHEN TYPE zzz IS USED.
included in the message.
PARAMETER IS IGNORED.
ssssssss
Where:
The sense data, which is only included in the message for
xxxx unit-check conditions. The number of sense bytes
The parameter name. displayed is dependent on the device type. 24 bytes are
displayed for the IBM 3400 series tape drives and 32
yyyyyy bytes are displayed for the IBM 3480 series tape drives. If
The macro name. an I/O error prevents the successful sensing of the
zzz The type of program that was coded on the macro. device, the word UNABLE is displayed in place of the
sense data.
Severity: 0
Explanation: This is the format of a tape control program
Explanation: The program type that you coded on the macro hardware error message.
is not compatible with the parameter that was coded.
System action: The parameter is ignored. Note: Sense byte 3 for a 3480 or 3490 device contains an error
recovery action (ERA) code.
User response: Do one of the following:
System action: None.
1. Correct the program type.
2. Remove the parameter. User response: None.
See TPF Operations for more information about the tape
support commands. See 3480 Magnetic Tape Subsystem
Miscellaneous Operator's Guide and 3490 Magnetic Tape Subsystem Operator's
Guide for more information about the meanings of and
000000000 recordid CANNOT BE A VFA CANDIDATE 000000000 xx,yy ILLEGAL IA. MSG EXCLUDED FROM
TEST
Where:
Where:
recordid
The record ID. xx,yy
The value of the illegal IA
Severity: 12
Explanation: An IA,LA from a message using an ILT address
Explanation: The record ID cannot be a virtual file access was not found in the appropriate table.
(VFA) candidate.
System action: None.
System action: None.
User response: None.
User response: Noe.
See TPF Program Development Support Reference for more
information about the program test vehicle (PTV).
000000000 nnnn CHAIN OVERLAYING mmmm
Where: 000000000 xx,yy INACTIVE LINE
nnnn Where:
The type of chain.
xx,yy
mmmm The inactive line number.
The type of core image restart area (CIMR) such as
ACPL, FCTB, ICDF, IPAT, RIAT, and so on. Explanation: The program test vehicle (PTV) intercepted a
SEND-type macro from an ILT terminal address to an inactive
Explanation: The core image restart area (CIMR) chain for line number.
the chain type referenced in the message overlays the type of
CIMR referenced in the message. System action: None.
User response: None. See TPF Program Development Support Reference for more
information about the program test vehicle (PTV).
See TPF System Installation Support Reference for more
information about the loaders program.
000000000 xx,yy INACTIVE TERMINAL
000000000 nnnnvv CONTAINS TOO MANY XTRNS, Where:
PROG NOT LOADED
xx The interchange address.
Where:
yy The line address.
nnnn
The program name. Explanation: The program test vehicle (PTV) intercepted a
SEND-type macro from an ILT terminal address to an inactive
vv The version number. terminal address.
Explanation: The program contained more than the System action: None.
maximum number of external references.
User response: None.
System action: None.
See TPF Program Development Support Reference for more
User response: None. information about the program test vehicle (PTV).
See TPF System Installation Support Reference for more
information about the loaders program, the maximum number 000000000 nnnn INVALID PROGRAM LENGTH —
of external references, and the linkage editor (LEDT). CARD IGNORED
Where:
000000000 xxxxxx FIND/FILE ERROR
nnnn
Where: The program name.
xxxxxx Explanation: The absolute length of the program indicated
The program name and version number. exceeds 4096.
Explanation: This is a T type message that is sent to the System action: None.
printer and the console devices.
User response: None.
System action: A system error dump is issued.
See TPF System Installation Support Reference for more
User response: None. information about the system allocator (SAL).
See TPF Operations for more information about the unit record
commands.
386 TPF Messages (System Error, Offline, and Program Status Word)
000000000
Explanation: The user specified a name in the call program See TPF System Installation Support Reference for more
card that is defined as a transfer vector to another program information about the loaders program.
within the system allocator (SAL) table. The loader
successfully found a module with that name in the object
000000000 nnnnvv OBJECT MODULE IS CORRUPTED
library. A module can only be loaded when requested by its
— MUST BE REASSEMBLED, PROGRAM
primary (transfer vector 0) name.
LOAD IS IGNORED
System action: None.
Where:
User response: None.
nnnn
See TPF System Installation Support Reference for more The program name.
information about the loaders program.
vv The version number.
000000000 xx,yy ON LINE IA,LA. MSG EXCLUDED 000000000 ABORT–ERROR TRYING TO READ/WRITE
FROM TEST. A 4K RECORD — TRACK FORMAT
INVALID
Where:
Explanation: While trying to read or write a 4 K record, the
xx,yy
record size on the track was found to be other than 4 K.
The value of IA.
System action: The load ends abnormally.
Explanation: An IA,LA from a message using an ILT address
is currently online. User response: Check the formatting of the loader general
file (LGF).
System action: None.
See TPF System Installation Support Reference for more
User response: None. information about the loaders program.
See TPF Program Development Support Reference for more
information about the program test vehicle (PTV).
000000000 ABORT–ERROR TRYING TO READ/WRITE
IMAGE CONTROL RECORD — TRA
000000000 xx PDUMP RECORDS GENERATED FORMAT INVALID
System action: None. See TPF System Installation Support Reference for more
information about loaders.
User response: None.
388 TPF Messages (System Error, Offline, and Program Status Word)
000000000
000000000 ACP CPUID INVALID — PROCS xxxxxx 000000000 ALL INPUT CARDS HAVE BEEN
ALLOWED PROCESSED – ERRORS DETECTED
000000000 ASMP ERROR REPORT ——— NOT See TPF Application Programming for information about CBLD
FOUND ON LISTAPE and TPF System Installation Support Reference for information
Explanation: The program identified was requested through about TLDR.
the LIST option but not found during a search of the LISTAPE
input. 000000000 ATTENTION - I/O ERROR READING
System action: None. ADATA
User response: Verify the program name from the output of Explanation: An I/O error occurred when auxiliary loader
the multiple assembly (MASM) program. (TLDR) attempted to read an ADATA file for a program being
run.
See TPF System Installation Support Reference for more
information about the multiple assembly and compilation System action: The program was loaded without the ADATA
print program. file.
User response: Do one of the following:
000000000 ATTENTION - APRG CLEAR CARD INPUT, v If the ADATA file is not required for the program, do
ADATA FILES WILL BE CLEARED nothing.
Explanation: The LOADER APRG CLEAR card was specified v If the ADATA file is required, ensure a valid ADATA file
in the auxiliary loader (TLDR) load deck. When the output exists for the program and run TPFLDR again.
from this job is loaded to the online TPF system, all ADATA
files on the target image will be cleared. See TPF System Installation Support Reference for more
information about TLDR.
System action: None.
390 TPF Messages (System Error, Offline, and Program Status Word)
000000000
See TPF Database Reference for more information about Explanation: The load card does not match the load card in
mapping support installation. the name table of the TLDR segment. The CPU ID may be in
the wrong column or there may be an error in the REP card
patch address.
000000000 AUTO TYPE—xx FOR FIELD —yyyy—
INVALID FOR MAP—zzzz, TERMINATED System action: None.
zzzz
The map name. 000000000 BAD TAPE
Explanation: This is a Type E error. The map referenced in Explanation: The recoup phase 2-created tape contains a
the message was not generated because the TYPE= operand record type that is not valid.
for the field referenced in the message is inconsistent for the System action: None.
map designation; for example, an input-only map has a
TYPE=CO field. This type is only valid for output maps. User response: Do the following:
1. Correct the error where possible.
System action: None.
2. Start recoup phase 3 again.
User response: None.
See TPF Database Reference for more information about In addition, the operator is informed of the error and
mapping support installation. processing is stopped. The operator, then, should enter an
abort message to carry out housekeeping procedures.
If you still require the capability to fall back from the TPF 4.1
000000000 BCODE(1) PARAMETER IS NOT VALID
system to the TPF 3.1 system, recode the pool layout.
Severity: 4
If you no longer require the capability to fall back from the
TPF 4.1 system to the TPF 3.1 system, you do not need to Explanation: The first subparameter of the BCODE parameter
make any changes at this time. is not EBCDIC or UASCII.
System action: None.
000000000 BCODE HAS MORE THAN ONE USACII
SUBPARAMETER EXCESS IGNORED User response: Do the following:
1. Correct the input.
Severity: 0
2. Rerun Phase 1.
Explanation: None.
System action: None. 000000000 BCODE(1) VALUE IS UASCII BUT UASCII
SUPPORT NOT INCLUDED IN GEN
User response: None.
Severity: 4
000000000 BCODE HAS MORE THAN THREE Explanation: The BCODE parameter specifies UASCII code
SUBPARAMETERS EXCESS PARAMETERS for this BSC line but UASCII code support was not included
IGNORED in the system initialization program (SIP) generation.
Severity: 0 System action: None.
Explanation: None. User response: Do one of the following:
System action: None. v If UASCII code support is needed, correct the SIP input.
Then, rerun the SIP generation and rerun Phase 1.
User response: None.
v If UASCII code support is not needed, correct the input.
Then, rerun Phase 1.
000000000 BCODE(1) DEFAULTED TO EBCDIC BUT
NO EBCDIC SUPPORT IN GEN 000000000 BCODE(2) PARAMETER NOT VALID
Severity: 4 Severity: 4
Explanation: The first subparameter of the BCODE parameter Explanation: The second subparameter of the BCODE
was defaulted to EBCDIC but EBCDIC support was not parameter is not YTRAN or NTRAN.
included in the system initialization program (SIP) generation.
System action: None.
System action: None.
User response: Do the following:
User response: Do one of the following:
1. Correct the input.
v If EBCDIC support is needed, correct the SIP input. Then,
rerun the SIP generation and rerun Phase 1. 2. Rerun Phase 1.
Explanation: The first subparameter of the BCODE parameter User response: Do the following:
is EBCDIC but EBCDIC support was not included in the 1. Correct the input.
system initialization program (SIP) generation. 2. Rerun Phase 1.
System action: None.
User response: Do one of the following: 000000000 BEYOND ALLOC LGTH – PATCH NOT
APPLIED
v If EBCDIC support is needed, correct the system
initialization program (SIP) input. Then, rerun the SIP Explanation: A patch for a program or a keypoint extends
generation and rerun Phase 1. beyond the allocated length of the program or keypoint.
v If EBCDIC support is not needed, correct the input. Then, System action: The load is aborted for a keypoint. The patch
rerun Phase 1. is ignored for a program and the load is continued.
User response: None.
See TPF System Installation Support Reference for more
information about the loaders program.
392 TPF Messages (System Error, Offline, and Program Status Word)
000000000
Where:
000000000 BEYOND END STATEMENT nn The BST parameter number.
Explanation: The patch address is beyond the end statement Severity: 4
of the main storage-resident program.
Explanation: BST was not specified but an entry was found
Note: If a main storage-resident program that is being loaded in the SNCT table for this line with the station number
through an operational program list is being patched, referenced in the message. Since no POL and SEL characters
then this warning message is only generated for the were specified, the pointer into the BSAT table could not be
first set of REP cards for this program. If another determined.
program is patched before more patches are applied to System action: None.
the original program and if there are patches beyond
the end of the program in the second set of REP cards, User response: Do the following:
then the second set of patches is applied without this 1. Correct the input.
warning message.
2. Rerun Phase 1.
System action: The patch is still applied.
User response: Do the following: Explanation: The BST parameter was specified for a BSC line
User response: Do the following: 000000000 BSTnn POL SUBPARAMETER HAS TOO
MANY CHARACTERS
1. Correct the input.
2. Rerun Phase 1. Where:
Severity: 0
Explanation: BST parameter was specified but there is no
394 TPF Messages (System Error, Offline, and Program Status Word)
000000000
entry in the SNCT table for this line with the station number
000000000 BTYPE PARAMETER IS NOT BSPP OR
referenced in the message.
BSMP
System action: None.
Severity: 4
User response: The condition described by the message may
Explanation: The BTYPE parameter must specify either point
be valid. If it is not valid, correct the input and rerun Phase 1.
to point (BSPP) or multipoint (BSMP) for each BSC line.
Explanation: None.
000000000 BTYPE(2) PARAMETER IS MAST BUT
System action: None. MASTER SUPPORT IS NOT INCLUDED IN
GEN
User response: None.
Severity: 4
Explanation: The station is being defined as a master station
on a BSC multipoint line but master station support was not System action: None.
included in the system initialization program (SIP) generation.
User response: None.
System action: None.
See TPF System Installation Support Reference for more
User response: Do one of the following: information about variable cross referencing.
v If the station is a master station, correct the SIP input. Then,
rerun the SIP generation and rerun Phase 1. 000000000 BYPASSED — KEYPOINT HAS NO VALID
v If the station is not a master station, correct the input. Then, PATCHES
rerun Phase 1.
Explanation: There were no valid patches for this KEYPOINT
PATCH card so no action is taken.
000000000 BTYPE(2) PARAMETER IS TRIB BUT TRIB
SUPPORT IS NOT INCLUDED IN GEN System action: None.
User response: Do one of the following: 000000000 CALLED PROGRAM GREATER THAN 1055
v If the station is a tributary station, correct the SIP input. BYTES — IGNORED
Then, rerun the SIP generation and rerun Phase 1.
Explanation: The system test compiler (STC) will not place
v If the station is not a tributary station, correct the input. any programs larger than 1055 bytes on the test unit tape.
Then, rerun Phase 1.
System action: None.
Explanation: The third subparameter of the BTYPE parameter See TPF System Installation Support Reference for more
is not valid. information about the loaders program.
396 TPF Messages (System Error, Offline, and Program Status Word)
000000000
See TPF Program Development Support Reference for more See TPF Program Development Support Reference for more
information. information.
000000000 CAPACITY OF THE SDMU HAS BEEN 000000000 CHECK LOAD CARDS FOR THIS
EXCEEDED. A NEW LIBRARY TAPE HAS SEGMENT
BEEN CREATED WITH REFLECTS INPUT
CARDS PROCESSED TO THIS POINT Explanation: The load cards for this segment might be
incorrect. This error occurs while trying to use:
Explanation: It is probable that more work area is needed on v A PATCH KEYPT card followed by a CALL KEYPT card for
the unit test disk. the same keypoint
System action: None. v Two PATCH KEYPT cards for the same keypoint.
000000000 CMD NOT CODED CORRECTLY 000000000 CONTROL UNIT STATUS REINITIALIZED
(SEGMENT CCL1)
Explanation: This is a Type E error. The user map has a
DPANL CMD= option coded that is not valid or is misspelled. Explanation: None.
System action: The map is not created. System action: None.
User response: Do the following: User response: None.
1. Correct the error.
2. Run the job again. 000000000 COPY REQUESTED FOR MEMBER xxxxxxxx
IN MEMBER yyyyyyyy IS A NESTED
See TPF Database Reference for more information about REQUEST/IGNORED
mapping support installation.
Where:
xxxxxxxx
000000000 COMMANDS OUT OF SEQUENCE RESET
The name of the member for which the copy was
PTV
requested.
Explanation: None.
yyyyyyyy
System action: None. The name of the member into which the first member
will be copied.
User response: None.
Explanation: See the JCL SYSLIB data definition.
See TPF Program Development Support Reference for more
information. System action: None.
User response: None.
000000000 COMPLETE — ERROR FOUND See TPF System Installation Support Reference for more
Explanation: None. information about variable cross referencing.
398 TPF Messages (System Error, Offline, and Program Status Word)
000000000
Explanation: The size of the CP CSECT names module System action: None.
(CPLKMP) is too small to contain the names of all the CP User response: None.
CSECTS.
See TPF System Installation Support Reference for more
System action: None. information about the loaders program.
User response: No CP CSECT module may be patched. This
problem can be fixed by correcting the CPLKMP module. 000000000 CP VERSION NOT FOUND — JOB
See TPF System Installation Support Reference for more ABORTED
information about the loaders program. Explanation: The requested control program (CP) was not
found.
000000000 CP IN CORE EXCEEDS BUFSIZ PARM — System action: None.
JOB ABORTED
User response: Do the following:
Explanation: The size of the control program (CP) is larger
than the BUFSIZ parameter when running offline TLDR. 1. Correct the error.
2. Submit the job again.
The BUFSIZE parameter needs to be larger than any single
component that is included in the load deck.
See TPF System Installation Support Reference for more
System action: The load is ended. information about the loaders program.
2. Run the job again. Explanation: A loader image clear card or a loader load
CTKX card was encountered that is out of sequence.
See TPF System Installation Support Reference for more System action: None.
information about the loaders program.
See TPF System Installation Support Reference for more Note: The control program (CP), the start up programs (such
information about the loaders program. as PTV and ACPL), all E-type programs, the loader
control record, and the general file loader program
directory records (PDRs) are written to the general file
000000000 CTKx NOT CALLED ON G.FILE CONFIG
using the special MCHR file addresses.
CARD-JOB ABORTED
System action: None.
Where:
User response: None.
x The keypoint values.
See TPF System Installation Support Reference for more
Explanation: The configuration card is not valid.
information about the loaders program.
System action: None.
User response: Do the following:
400 TPF Messages (System Error, Offline, and Program Status Word)
000000000
See TPF Program Development Support Reference for more Explanation: CC1–15 of this card is blank. However, the last
information. card did not specify a continuation.
See TPF Program Development Support Reference for more Explanation: Data was entered into a field defined as a spare
information. field.
000000000 DATA GENERATION — FIELD TOO LONG 000000000 DATA GENERATION — INVALID ALPHA
TRUNCATED ON LEFT DATA ENTERED
Explanation: Data to be entered into a field was too long for Explanation: A nonalphabetic character was entered into a
this field. Truncation has occurred on the left and the field defined to be alphabetic only.
maximum field length was entered.
System action: None.
System action: None.
User response: None.
User response: None.
See TPF Program Development Support Reference for more
See TPF Program Development Support Reference for more information.
information.
402 TPF Messages (System Error, Offline, and Program Status Word)
000000000
Explanation: The length of a record indicated on the GSTAR Explanation: A field that must be coded in hexadecimal
card is not equal to the length of a record on the standard contains a character other than 0 through 9 or A through F.
data/message file (SDMF).
System action: The field set is ignored.
System action: The length given on the card is assumed to be
correct and used. User response: None.
See TPF Program Development Support Reference for more
User response: None.
information.
See TPF Program Development Support Reference for more
information.
000000000 DATA GENERATION — SDMU ID TOO
SHORT — SDMU IGNORED
000000000 DATA GENERATION — MODEL RECORD
NOT AVAILABLE Explanation: The ID used in a GSTAR card was less than 12
characters.
Explanation: A record was called from the standard
System action: No record was called from the standard
data/message file (SDMF) that was not available.
data/message file (SDMF).
System action: The records were created without using a
User response: None.
model from SDMF.
User response: None. See TPF Program Development Support Reference for more
information.
See TPF Program Development Support Reference for more
information.
000000000 DATA GENERATION — SDMU ID TOO
LONG — SDMU IGNORED
000000000 DATA GENERATION — NO DELIMITER
LAST ENTRY IGNORED Explanation: The ID used in a GSTAR card was greater than
12 characters.
Explanation: No delimiter found at the end of a field to be
entered. System action: No record was called from the standard
data/message file (SDMF).
System action: This field was not entered into the record.
User response: None.
User response: None.
See TPF Program Development Support Reference for more
See TPF Program Development Support Reference for more information.
information.
User response: None. See TPF Program Development Support Reference for more
information.
See TPF Program Development Support Reference for more
information.
000000000 DATA GENERATION — UNUSUAL
CONDITION ON DISK — IGNORED
000000000 DATA GENERATION — NON DEC. CHAR
— OR BAD DELIMITER IGND Explanation: Either this label is not available in DRIL or
DRIL was not outputted to disk.
Explanation: A non-numeric character was found in a field of
4 decimal digits or no delimiter was found. System action: None.
System action: The remainder of this card is ignored. User response: None.
User response: None. See TPF Program Development Support Reference for more
information.
See TPF Program Development Support Reference for more
information.
000000000 DATA GENERATION — ZERO LN. FIELD 000000000 DIRECTORY RCDS ON DGF HAVE NOT
— CD. IGNORED BEEN PROCESSED ON-LINE. REPLY ‘C’ TO
CONTINUE OR ‘T’ TO TERMINATE
Explanation: A field of zero length was found. It cannot be
entered into the record. Explanation: Directory records created by a previous offline
pool maintenance run were not processed by the online
System action: The rest of the card is ignored.
system. This can happen even when the previous run did not
User response: None. go to the end-of-job.
See TPF Program Development Support Reference for more System action: None.
information.
User response: See your system programmer for more
information. If told to run the job, then reply with the
000000000 DATA RECORD NOT AVAILABLE — character C. Otherwise, reply with the character T.
ENTRY IGNORED See TPF Database Reference for more information about offline
Explanation: The requested ID is not available on the pool maintenance.
standard data/message file (SDMF).
System action: None. 000000000 DUPLICATE — LOAD CARD — JOB
ABORTED
User response: None.
Explanation: This program was already loaded. This message
See TPF Program Development Support Reference for more appears to the right of the card that caused the error.
information.
System action: None.
Explanation: The logical device parameter for this parameter See TPF System Installation Support Reference for more
must be A,B,C, D (for devices A-D), or R (for ratio information about the loaders program.
dispensing).
System action: None. 000000000 DUPLICATE USER RECORD ID(x“xxxx”,
User response: None. C“cc”, D“ddd”) THIS RUN
Severity: 12
000000000 DIRECTORY NUMBER nnnn IS TOO Explanation: The same ID (displayed in hex, character, and
LARGE FOR TPF 3.1 FIELD – FALLBACK decimal formats) was coded more than once.
WILL NOT BE POSSIBLE
System action: None.
Where:
User response: None.
nnnn
The directory number.
000000000 DURING-RECOUP TAPES CANNOT BE
Explanation: This is a warning that the pool directory ordinal CORRECTLY PROCESSED. RUN MAY BE
number exceeds the maximum value that can fit in the TPF 3.1 INVALID
field. Therefore, the TPF 3.1 field cannot be filled in and the
directory cannot be used in the TPF system. Explanation: The number in the recoup keypoint record
denoting the last during-recoup primary real-time tape (RTA)
System action: Processing continues. is not greater than the number denoting the last pre-recoup
User response: The TPF 4.1 system provides the capability to RTA. This indicates a wraparound situation on the tape
code more directories than was possible with the TPF 3.1 sequence number written in the dump formatter record at the
system. However, to do so, you must be sure that you no beginning of each RTA. As this could be expected to happen
longer need to fall back from the TPF 4.1 system to the TPF only about once in a billion times (the number ranges from 0
3.1 system. to 4,294,967,295), it was probably caused by a system error.
If you still require the capability to fall back from the TPF 4.1 System action: None.
system to the TPF 3.1 system, then recode the pool layout. User response: Remove any RTAs known to have been
If you no longer require the capability to fall back from the created during recoup. The run should then be correct except
TPF 4.1 system to the TPF 3.1 system, you do not need to for addresses released during recoup.
make any changes at this time. See TPF Database Reference for more information about offline
pool maintenance.
404 TPF Messages (System Error, Offline, and Program Status Word)
000000000
Explanation: This message is printed when column 72 of the See TPF Database Reference for more information about
control card is reached on a scan without finding a delimiter mapping support installation.
for the keyword or keyword value being scanned.
System action: None. 000000000 END STC
User response: None. Explanation: The END STC card on the test unit tape (TUT)
is found. It indicates that the completion of the system test
See TPF System Installation Support Reference for more vehicle (STV) or the last unit/package test unit on the TUT.
information about variable cross referencing.
System action: None.
Explanation: None. See TPF Program Development Support Reference for more
information.
System action: None.
referenced in the message from an object library. User response: Make sure you are referencing the proper
SALTBL. If not, correct the deck and submit the job again. If
System action: None. yes, verify the content of the SALTBL.
User response: None. See TPF System Installation Support Reference for more
See TPF System Installation Support Reference for more information about the loaders program.
information about the loaders program.
000000000 ERROR — ILLEGAL CARD OR SEQUENCE
000000000 EOV MOUNT NEXT TAPE. NEWTAPE=Y, – THIS CARD IGNORED
EOF=N
Explanation: This card is not valid because it is out of
Explanation: The program encountered an EOV condition. sequence.
User response: If there are more tapes to process, reply Y. User response: None.
Otherwise, reply N and the program gives a summary print of
See TPF Program Development Support Reference for more
data processed.
information.
See TPF Database Reference for more information about offline
pool maintenance.
000000000 ERROR IN PARAMETER OF CALL CARD
406 TPF Messages (System Error, Offline, and Program Status Word)
000000000
keypoint A. Perhaps CK1EAP in keypoint A needs to be See TPF System Installation Support Reference for more
increased. information about the loaders program.
Explanation: An error occurred while reading the block for 000000000 EXCEEDS ALLOCATED LNGTH, PROG
the segment name referenced in the message occurred. This NOT LOADED
message is sent to a printer.
Explanation: None.
System action: The job is ended.
User response: None.
User response: None.
System action: None.
000000000 ERROR READING CARD See TPF System Installation Support Reference for more
information about the loaders program.
Explanation: This message is caused by one of these errors:
v An operator, operand, or label that is not valid. 000000000 EXCEPTION RECORDING PARAMETER
v An operand is truncated and the portion on the current card INVALID
is greater than 14 characters.
Severity: 12
In either case, the message is issued to a printer, along with Explanation: The only two valid options for this parameter
the card image and segment name. are XCP=YES or XCP=NO.
System action: None. System action: None.
User response: None. User response: None.
000000000 ERROR READING FCTB VERSION=xx — 000000000 FILE ADDR EXCEEDS LIMIT OF GEN FILE
NOTIFY SUPPORT
Explanation: The file address exceeds the limit for the
Where: general file.
xx The file address compute program (FACE) table version. System action: None.
Explanation: An error was encountered while reading the file User response: None.
address compute program (FACE) table version referenced in
the message. See TPF System Installation Support Reference for more
information about the loaders program.
System action: None.
User response: Do the following: 000000000 FILE ADDRESS PARA. LABEL NOT FOUND
1. Correct the error. IN DRIL DELETED
2. Submit the job again. Explanation: The file addresses indicated in the header
cannot be found within the DRIL entry.
See TPF System Installation Support Reference for more
System action: This file address was deleted.
information about the loaders program.
User response: None.
000000000 ERROR READING OBJ CODE — NOTIFY See TPF Program Development Support Reference for more
SUPPORT information.
Explanation: A read error was encountered while doing
input/output (I/O) on the object code. 000000000 FIND ERROR ON PARS LIST
System action: None. Explanation: The programmer airlines reservation system
(PARs) list specified on the PARSvv card could not be found.
User response: Do the following:
1. Correct the error. System action: None.
2. Submit the job again. User response: Make sure PARSvv is on the object library
specified in the load. If not, put it on the object library and
submit the load again.
See TPF System Installation Support Reference for more User response: Do the following:
information about the loaders program. 1. Provide the missing card.
2. Run the auxiliary loader.
000000000 FOLLOWING DATA NOT FILED
See TPF System Installation Support Reference for more
Explanation: There is an error in the data record header in
information about the loaders program.
the pilot system or individual record.
System action: The record is not loaded. The header is
000000000 HARDWARE ERROR IN FILE ADDRESS —
written to the real-time tape.
PROGRAM FOLLOWS
User response: None.
Explanation: The CE1SUG error indicator is set following the
See TPF Program Development Support Reference for more FINWC macro for the original (a base system) program. The
information. test program from the TUT is written to the real-time tape
after the message.
000000000 FOLLOWING LOADER CARD INVALID System action: The program is not loaded.
Explanation: Either this card was not an END, LDT, or User response: None.
LOADER card, or the modules specified on the LOADER card
See TPF Program Development Support Reference for more
is not valid.
information.
System action: None.
2. Submit the job again. Explanation: A hardware error occurred so SELD was unable
to retrieve the record.
See TPF System Installation Support Reference for more System action: None.
information about the loaders program.
User response: None.
000000000 FOLLOWING LOADER LOAD CARD OUT See TPF Program Development Support Reference for more
OF SEQUENCE: information.
000000000 IERxxxx
000000000 GENERAL FILE IS ON AN UNSUPPORTED
DEVICE TYPE Where:
See TPF System Installation Support Reference for more User response: None.
information about the loaders program. See TPF System
See OS Sort/Merge System Information: System
Generation for more information about the devices that are
Generation/Installation library.
supported.
000000000 G.FILE CONFIG CARD NOT GIVEN — JOB 000000000 IGNORED – UNKNOWN CARD TYPE
ABORTED Explanation: This card is unrecognizable by the loader.
Explanation: The configuration card was not included in the System action: None.
load deck.
User response: Do the following:
System action: None.
1. Correct the error.
408 TPF Messages (System Error, Offline, and Program Status Word)
000000000
2. Submit the job again. See TPF Program Development Support Reference for more
information.
See TPF System Installation Support Reference for more
information about the loaders program.
000000000 INPUT TAPE IS AFTER RECOUP. PROCESS
IN NEXT OFFLINE UPDATE
000000000 ILLEGAL FORMAT IN PREVIOUS
Explanation: The primary real-time tape (RTA), which is
MESSAGE
mounted as SYSIN, was created after running recoup phase 3.
Explanation: The program test vehicle (PTV) intercepted a Processing this tape would distort the error analysis
SEND-type macro from an ILT terminal address and the performed by recoup phase 4 of recoup (Run Type 4).
message contains illegal control characters.
System action: None.
System action: None.
User response: Save the RTA as an unprocessed RTA.
User response: None.
See TPF Database Reference for more information about offline
See TPF Program Development Support Reference for more pool maintenance.
information.
000000000 INSUFFICIENT CORE — INCREASE
000000000 IMPROPER SEQUENCE OF LOAD REGION SIZE
ADDRESS CARDS JOB TERMINATED Explanation: The program issued a GETMAIN request for
Explanation: The load address card that contains the first set core to build a list from the control cards. The GETMAIN was
of 1055 byte addresses did not contain a 1 in CC41. unsuccessful. The program should be run with a larger region
or partition size.
System action: None.
System action: None.
User response: None.
User response: None.
See TPF Program Development Support Reference for more
information about the system test compiler (STC). See TPF System Installation Support Reference for more
information about the multiple assembly and compilation
print program.
000000000 INCORRECT CSECT NAME OR FORMAT
ERROR
000000000 INTERVENTION PARAMETERS NOT
Explanation: The CP REP card contains an incorrect CP VALID – RUN ABORTED
CSECT name.
Explanation: The characters specified for the parameter are
System action: The card is ignored. not valid.
User response: None. System action: None.
See TPF System Installation Support Reference for more User response: Specify the correct parameter and submit the
information about the loaders program. job again.
000000000 INVALID BSC SEND LEVEL – DEFAULT=1 000000000 INVALID COMMUNICATION WITH
LINKER
Severity: 4
Explanation: A return code that is not valid was received
Explanation: For a BSC line, the SL parameter in the SKLNG from the linkage editor (LEDT) while a program is being link
macro was omitted or outside the range 1 through 256.
edited.
System action: None.
System action: None.
User response: If the default value is not acceptable, update User response: None.
the input and rerun Phase 1 or patch the generated record at
the byte following the SLCFnn tag. See TPF System Installation Support Reference for more
information about the loaders program.
System action: None. Explanation: The control unit number specified is greater
than maximum control unit number as calculated by the
User response: None. system initialization program (SIP).
See TPF Program Development Support Reference for more System action: None.
information.
User response: Do the following:
See TPF Program Development Support Reference for more Explanation: CC69 of the DRIL record is in error. This
information. message indicates that the record was deleted from the library
for this run.
Explanation: The data record header does not contain valid User response: None.
address code (X'09' for absolute, X'07' for ordinal number and See TPF Program Development Support Reference for more
record type). The first 44 bytes of the record header are information about the system test compiler (STC).
written to the real-time tape.
System action: The record is ignored. 000000000 INVALID CU NUMBER – PKST
User response: None. GENERATION SUPPRESSED
410 TPF Messages (System Error, Offline, and Program Status Word)
000000000
User response: If default is not acceptable, correct the input User response: None.
and rerun Phase 1. Alternatively, the generated PKST can be See TPF Program Development Support Reference for more
patched at the XSTAnn tag. information.
000000000 INVALID DEVICE TYPE CODED 3350 000000000 INVALID FORMAT MSG IGNORED
DEFAULT SUBSTITUTED
Explanation: A program test vehicle (PTV) ZSTVS command
Severity: 4 was entered incorrectly.
Explanation: The DEVICE parameter of the first SENDG System action: None.
macro was not coded with the proper device type.
User response: Enter the command again.
System action: None.
See TPF Program Development Support Reference for more
User response: If the default is not acceptable, correct the information.
input and rerun Phase 1.
Explanation: This message indicates that the record was 1. Correct the input.
deleted from the library for this run. 2. Rerun Phase 1.
000000000 INVALID LINE NUMBER – SCK See TPF Database Reference for more information about
GENERATION SUPPRESSED mapping support installation.
Severity: 8
000000000 INVALID MODE PARAMETERS
Explanation: The value specified in LNSY parameter is not a
valid hexadecimal or the line number specified is greater than Explanation: The mode parameter (STV mode) of the
the maximum symbolic line number as generated by the program test vehicle (PTV) ZSTVS START RUNID XY
system initialization program (SIP). command was not in the valid range. Parameter X can only be
A or B. Parameter Y can be a numeral from 1 through 9.
System action: None.
System action: None.
User response: Do the following:
1. Correct the input. User response: Enter the command again.
2. Rerun Phase 1.
412 TPF Messages (System Error, Offline, and Program Status Word)
000000000
Explanation: The card image, the program name, and the See TPF System Installation Support Reference for more
operand that are not valid are given. information about loaders.
See TPF Program Development Support Reference for more yyyyyy xxxx
information. The SVC code.
Explanation: An illegal SVC code was issued. Control is
000000000 INVALID ORD NUMBER transferred to the DENDT macro.
User response: None. See TPF Program Development Support Reference for more
information.
See TPF Operations for more information about online file
recoup.
Explanation: None.
See TPF Database Reference for more information about offline
pool maintenance. System action: None.
User response: None.
000000000 INVALID PROC ID IN KEYPT CALL – JOB See TPF System Installation Support Reference for more
ABORTED information about loaders.
Explanation: The processor ID is not valid.
System action: None. 000000000 INVALID REQUEST MSG IGNORED
User response: Do the following: Explanation: A program test vehicle (PTV) service request
was issued in the wrong operating state.
1. Correct the error.
2. Submit the job again. System action: None.
User response: Do the following:
See TPF System Installation Support Reference for more 1. Ensure that the proper operating state is in effect.
information about the loaders program.
2. Enter the command again.
000000000 INVALID RECORD FOUND ON INPUT See TPF Program Development Support Reference for more
RCP TAPE. information.
Explanation: The program found a primary real-time tape
(RCP) that is not valid. The CY6PGM field did not contain the 000000000 INVALID RETURN CODE FROM LEDT, JOB
correct subsystem user ID in a MDBF system. ABORTED
System action: None. Explanation: TLDR called the linkage editor (LEDT) to
User response: Do the following: perform link editing and received an unknown return code.
414 TPF Messages (System Error, Offline, and Program Status Word)
000000000
User response: None. See TPF Program Development Support Reference for more
information about the RTT utility. See TPF Operations for more
See TPF Program Development Support Reference for more information about the ZTRAC command.
information.
Explanation: The syntax in the control card is not valid. 000000000 INVALID TRCE OPTION CARD
System action: None. Explanation: The program test vehicle received a SFDP
User response: None. UNABLE response from SFDP caused by a TRCE option.
See TPF System Installation Support Reference for more System action: The SFT option is ignored.
information about the multiple assembly and compilation User response: None.
print program.
See TPF Program Development Support Reference for more
information.
000000000 INVALID SYNTAX ON CNTRL CARD
Explanation: The syntax on the control card does not 000000000 INVALID UNTRAP OF A PHASE I MACRO
correspond to the rules specified. — STPMT yyyyyy
System action: None. Explanation: Control is transferred to the next sequential
User response: None. instruction in the driver program.
See TPF System Installation Support Reference for more System action: None.
information about variable cross referencing. User response: None.
See TPF Program Development Support Reference for more
000000000 INVALID TAPE — NO DX RECORD ON information.
TAPE
Explanation: The tape being post processed does not contain 000000000 I/O ERROR DURING BLDL MACRO
a dump label (DX) record before the second tape mark on the
tape. The STPP post processor expects one tape mark between Explanation: None.
the header labels and data, and a second tape mark between
System action: None.
the data and trailer labels. If a DX record is not contained
between the two tape marks, the tape is considered not to be User response: None.
valid.
See TPF System Installation Support Reference for more
System action: None. information about loaders.
User response: None.
See TPF Program Development Support Reference for more 000000000 I/O ERROR OCCURRED IN READING THE
information. DIRECTORY. JOB TERMINATED
Explanation: An error occurred while reading the directory
000000000 INVALID TRAC OPTION CARD block.
Explanation: The program test vehicle received an RTT System action: Processing is ended.
UNABLE message from real-time trace (RTT) caused by a User response: None.
TRAC option. PTV constructs and sends the ZTRAC 00F+
command to RTT. See TPF System Installation Support Reference for more
information about macro cross referencing.
System action: None.
000000000 I/O ERROR ON GEN FILE AT CCHHR 000000000 I/O ERROR ON GENERAL FILE AT
cccchhhhrr CYLINDER xxx HEAD xxx RECORD
xxx—RUN ABORTED
Where:
Where:
cccchhhhrr
The hexadecimal representation of the cylinder (cccc), xxx The decimal representation of the hardware address.
head (hhhh) and record (rr) portions of the hardware
address where the error occurred. Explanation: The program was unable to read or write the
general file (DGF or RGF) at the indicated address.
Explanation: This error message is issued out of ALDR
System action: None.
relatively early in the load process. Other messages may or
may not accompany this message. It is a severe problem User response: None.
caused by one of the following:
See TPF Database Reference for more information about offline
v A read error occurred while trying to read keypoint X.
pool maintenance.
v A read error occurred while trying to read keypoint A.
v An error occurred while reading a core-resident program
000000000 I/O ERROR ON OBJLIB
that would have been written to the general file during OPL
load. Explanation: None.
v An error occurred while reading an application program
System action: None.
during creation of the AP chain for OPL load.
v An error occurred while writing a keypoint to the correct User response: None.
area on the general file. See TPF System Installation Support Reference for more
v An unsuccessful read occurred for a previously patched information about loaders.
core-resident program from the general file.
v An error occurred while filing a general file keypoint.
000000000 I/O ERROR READING nnnnvv
v An error occurred while writing out the control program to
disks. Where:
v An error occurred while writing out the loader control nnnn
record. The program name.
v An error occurred while writing out a program directory vv The version number.
record (PDR) to the general file.
v An error occurred while writing core-resident programs to Explanation: There was an input/output (I/O) error while
the general file during OPL load. reading the program name and version number referenced in
the message.
v An error occurred while writing out the second block of a
core-resident program to the general file during OPL load. System action: None.
v An error occurred while writing a file-resident program to User response: None.
the general file.
See TPF System Installation Support Reference for more
v An error occurred while writing a 4K file-resident program
information about loaders.
from the object code work area to the general file.
v An error occurred while writing FCTB, ACPL, ICDF, SIGT,
or RIAT to disk. 000000000 I/O ERROR READING CP
416 TPF Messages (System Error, Offline, and Program Status Word)
000000000
000000000 JCD TAPE RECORD xxx HAS yy FOR AN 000000000 KEYPOINT READ ERROR
ID. THIS IS UNACCEPTABLE.
Explanation: A keypoint read error occurred.
Where:
System action: None.
xxx The JCD tape record name.
User response: None.
yy The value that is not acceptable.
See TPF System Installation Support Reference for more
Explanation: An unidentifiable record identification character information about loaders.
causes this message and stops the reduction run.
System action: None. 000000000 KEYPOINTS ALLOCATION ON GF
CONTAINS INSUFFICIENT ROOM FOR GF,
User response: None.
RT, AND ONLINE KPT PATCH AREA
See TPF Operations for more information about system
Explanation: None.
performance.
System action: None.
000000000 JCD TAPE RECORD xxx IS OUT OF User response: None.
ORDER. REDUCTION WILL PROCESS
INFORMATION GATHERED TO THIS See TPF System Installation Support Reference for more
POINT AND TERMINATE. information about loaders.
Where:
000000000 KEYPT nnnnvv, INCORRECT NAME
xxx The JCD tape record name.
Where:
Explanation: The JRA1, JRA2, JRM1, and JRF1 offline
segments print this message when a record is written to the nnnn
JCD tape in the wrong order. The record number is equivalent The program name of the keypoint.
to the value in DCOUNT. vv The version number of the keypoint.
System action: None. Explanation: The name on a general file or on a call keypoint
User response: Review the record on the tape with that card is not valid.
corresponding number to diagnose the problem. System action: None.
See TPF Operations for more information about system User response: None.
performance.
See TPF System Installation Support Reference for more
information about loaders.
000000000 JOB ABORTED — FIX LOAD ADDRESS
CARD AND RESTART JOB
000000000 KEYPT OR AP NAME CANNOT BE FOUND
Explanation: The format of the load address card is incorrect. IN NAMETBL
System action: None. Explanation: One of the keypoints or AP programs was not
User response: Check the card for valid addresses in the found in the name table of TLDR.
correct card columns. System action: None.
See TPF Program Development Support Reference for more User response: None.
information.
See TPF System Installation Support Reference for more
information about the loaders program.
000000000 KEYPOINT CTKxvv IS TOO LARGE — JOB
ABORTED
000000000 KEYWORD ON CONTROL CARD IS NOT
Where: —LIST—
xvv The keypoint number. Explanation: A control card has been read on which the
Explanation: The keypoint exceeds its maximum size. keyword is not LIST.
See TPF System Installation Support Reference for more See TPF System Installation Support Reference for more
information about the loaders program. information about the multiple assembly and compilation
print program.
See TPF System Installation Support Reference for more Explanation: The program test vehicle (PTV) was requested
information about loaders. to operate in Live mode only through the ZSTVS TEST LIVE
command. The only PTV request that can now be serviced is
the PTV reset command. Any other PTV service request will
000000000 LENGTH OF FROM/TO VALUE GREATER cause the previous message to be generated.
THAN 8 CHARACTERS
System action: None.
Explanation: A value assigned to a FROM or TO keyword
exceeds eight characters. User response: None.
System action: None. See TPF Program Development Support Reference for more
information.
User response: None.
See TPF System Installation Support Reference for more 000000000 LNS zz aaa
information about the multiple assembly and compilation
print program. Where:
zz The symbolic line/link number.
000000000 LINE LENGTH FOR TYPE T OR FD
aaa The type of line/link (synchronous link control (SLC) or
EXCEEDED FOR THIS DEV. TYPE. —zz—
binary synchronous communication (BSC)).
MAP NAMED xxxx TERMINATED
Where: Note: When no lines exist, LNS NONE appears as the third
part of the message.
zz The device type.
Explanation: This formatted message is sent to the computer
xxxx
room agent set (CRAS) console that requested the single
The map name.
processor display.
Explanation: This is a Type E error. A DDATA statement with
System action: None.
a TYPE= T or FD has a CON== parameter coded. This
constant data exceeds the line size for the device type User response: None.
referenced in the message.
System action: The map referenced in the message is not 000000000 LOADER CONTROL CARD ERROR
generated.
Explanation: A loader control card error occurred.
User response: None.
System action: None.
See TPF Database Reference for more information about
mapping support installation. User response: None.
See TPF System Installation Support Reference for more
000000000 LINE NUMBER OUT OF SEQUENCE – information about loaders.
CHECK ALL SCKS INITIALIZED
Severity: 4 000000000 LOADER CTRL CARD OUT OF SEQ
Explanation: SCK macros should be coded in ascending line Explanation: The call keypoint card is out of sequence.
number order, so that the generation macros can check that all System action: None.
SCKS have been initialized. This message would also be
output if line numbers 0 or 1 were coded or any number User response: None.
418 TPF Messages (System Error, Offline, and Program Status Word)
000000000
See TPF System Installation Support Reference for more See TPF Program Development Support Reference for more
information about loaders. information.
Explanation: This message indicates that data is being loaded User response: None.
from the test unit.
See TPF Program Development Support Reference for more Explanation: The only valid options for this parameter are
information. LOCKP=DASD and LOCKP=PROC.
System action: None.
000000000 LOADING PILOT SYSTEM User response: None.
Explanation: The program test vehicle (PTV) loaded the
PILOT system requested in the RUNID option. 000000000 LOGGING PARAMETER INVALID
System action: None. Severity: 12
User response: None. Explanation: The only two valid options for this parameter
See TPF Program Development Support Reference for more are LOG=YES or LOG=NO.
information. System action: None.
User response: None.
000000000 LOADING PROGRAMS FROM TEST UNIT
Explanation: This message indicates that the programs are
being loaded from the test unit.
System action: None.
User response: None.
000000000 MACRO SEQUENCE ERROR – MUST 000000000 MACRO SEQUENCE ERROR – SENDG
FOLLOW SENDG MACRO WITH END PARAMETER FOUND –
MACRO IGNORED
Severity: 4
Severity: 8
Explanation: It is possible to generate PKSTs without
previously generating the SCKs. In this case, this message will Explanation: See the SKLNG macro errors.
be generated on the first PKSTG macro but it can be ignored.
If SCKs are being created in this run, the first PKSTG should System action: None.
follow a SENDG macro. User response: Do the following:
System action: None. 1. Correct the input.
420 TPF Messages (System Error, Offline, and Program Status Word)
000000000
See TPF Database Reference for more information about See TPF System Installation Support Reference for more
mapping support installation. information about variable cross references.
000000000 MAP NAME MISSING FROM DPANL 000000000 MAX (n) NO OF ENTRIES ALLOWED IN
STMNT, MAP TERMINATED DIR CONTROL CARD LIST EXCEEDED –
NAME=xxxx INCREASE VARIABLE &LISTMEM AND
REASSEMBLE
Where:
Where:
xxxx
The map name. n The number of entries that the program can print.
Explanation: This is a Type E error. The source member read Explanation: The program can print a list of up to the value
from the user's map library does not contain a four character specified in the message. The list, which is input to the
map name. program, exceeds this number of entries.
System action: This map is not created. System action: None.
1. Increase the value of the &MAXMEM local variable in System action: This statement is ignored and the next
ASSMDRIVE. statement is read.
2. Reassemble the program. User response: None.
See the TPF System Installation Support Reference for more See the TPF Database Reference for more information about
information about the multiple assembly/compilation mapping support installation.
program.
000000000 MORE THAN 10 ORD NUMBERS—MSG
000000000 MAXIMUM NUMBER OF LC CU REJECTED
EXCEEDED Explanation: None.
Severity: 4 System action: None.
Explanation: The SKLNG macro will allow at most 16 Local User response: None.
3270(LC) control units in the gen.
See TPF Operations for more information about online file
System action: None. recoup.
User response: Increase the size of the table XACUTAB in the
SKLNG macro. 000000000 MOUNT CORRECT DISK PACK AND
RESTART JOB
000000000 MESSAGE TOO LARGE, REJECTED Explanation: The system test compiler (STC) encountered a
Explanation: The length of the old format message was NO RECORD FOUND or a READ ERROR on the unit test
greater than 768 or the length of the new format message was disk or the object library disk.
greater than the &SAM3270 system initialization program System action: STC cannot continue.
(SIP) variable.
User response: Try another unit test disk.
System action: None.
See TPF Program Development Support Reference for more
User response: None. information.
See TPF Program Development Support Reference for more
information. 000000000 MPIF FILE SEQUENCE ERROR. OUTPUT
REPORT MAY BE INCORRECT
000000000 MESSAGE TOO SMALL, REJECTED Explanation: When reading Multi-Processor Interconnect
Explanation: The input message from the test unit tape Facility (MPIF) path plot and distribution data from the sorted
(TUT) had a count of less than four (the line number, file MDWKOUT, a problem with the amount of data was
interchange address, and terminal address (LNIATA) plus one found. Since the plots and distribution reports were already
character). printed, it should be noted that they may contain incorrect
data.
System action: None.
System action: None.
User response: None.
User response: None.
See TPF Program Development Support Reference for more
information. See TPF Operations for more information about system
performance.
422 TPF Messages (System Error, Offline, and Program Status Word)
000000000
000000000 NO ASSIGNED FILE STORAGE AREAS Explanation: The CUNO parameter must be specified.
REMAINING CORE DUMP FOLLOWS RUN
System action: None.
DISCONTINUED
User response: Do the following:
Explanation: All of the disk areas assigned to the system test
compiler (STC) loader by the load address cards were used. 1. Correct the input.
2. Rerun Phase 1.
System action: The run is started again.
User response: Do the following:
000000000 NO DUPLICATE RECORDS ALLOWED. A
1. Mount disk files with more scratch address. DUPLICATE HAS BEEN FOUND IN THIS
2. Supply additional load address cards. RUN — THE RUN WILL BE TERMINATED
WITH NO NEW LIBRARY
See TPF Program Development Support Reference for more Explanation: Two records with the same ID were created in
information. this run. If no records were created or updated during this
run, the message will also appear.
000000000 NO BST PARAMETERS SPECIFIED FOR System action: None.
BSC LINE
User response: Do the following:
Severity: 0
1. Remove one of the records.
Explanation: None. 2. Run the job again.
System action: None.
See the TPF Program Development Support Reference for more
User response: None. information.
See TPF Program Development Support Reference for more Explanation: This message is printed when no DE record is
information. found on any of the RTC files being merged.
System action: JRC1 processing is continued.
000000000 NO CORE FOR LIST — INCREASE User response: None.
REGION SIZE
000000000 NO GLOBAL VARIABLES USED IN See TPF Operations for more information about system
MEMBERS SEARCHED performance.
000000000 NO LINE ENTRY – SCK GENERATION See TPF Operations for more information about system
SUPPRESSED performance.
Severity: 8
000000000 NO PARS LISTS FOUND — RUN WILL
Explanation: The LNSY parameter was omitted in the CONTINUE WITHOUT IN-CORE DIRECT
SKLNG macro call.
Explanation: None.
System action: None.
System action: None.
User response: Do the following:
User response: None.
1. Correct the input.
2. Rerun Phase 1. See the TPF System Installation Support Reference for more
information about the loaders program.
424 TPF Messages (System Error, Offline, and Program Status Word)
000000000
000000000 NO REPORTS PRINTED DUE TO LACK OF See the TPF Program Development Support Reference for more
INPUT MESSAGES information.
System action: None. Explanation: Commas do not separate every two bytes of
patch data on the REP card.
User response: None.
System action: None.
See TPF Operations for more information about system
performance. User response: Do the following:
1. Correct the problem.
000000000 NO SCK RECORD GENERATION 2. Submit the job again.
Severity: 8 See the TPF System Installation Support Reference for more
Explanation: Generation of the SCK record was suppressed information about the loaders program.
due to one of the errors listed previously.
000000000 NOT APPLIED — NAME NOT EQUAL TO 000000000 NOT APPLIED — PATCH NAME NOT IN
PGM CALLED PARS LIST
Explanation: The name on the patch card does not match the Explanation: There was no corresponding name found in the
program or keypoint name on the LOADER CALL card. programmer airlines reservation system (PARS) list for this
patch name.
System action: None.
System action: None.
User response: Do the following:
1. Correct the problem. User response: Do one of the following:
2. Submit the job again. v Correct the patch name.
v Take the card out of the deck.
See the TPF System Installation Support Reference for more
information about the loaders program. See the TPF System Installation Support Reference for more
information about the loaders program.
Explanation: The patch address on the REP card is greater Explanation: This REP card belongs to a program that has a
than the allocated size. later call superseding it. Therefore, the program and this REP
card are ignored.
System action: None.
System action: None.
User response: Do the following:
1. Correct the problem. User response: None.
2. Submit the job again. See the TPF System Installation Support Reference for more
3. Resubmit the request. information about the loaders program.
See the TPF System Installation Support Reference for more 000000000 NOT ENOUGH CORE ALLOCATED FOR
information about the loaders program. PGM TABLE — JOB ABORTED
Explanation: The minimum of 4000 bytes of storage cannot
000000000 NOT APPLIED — PATCH ADDR NOT be allocated for the program table in BPR0. Alternatively, the
HALFWORD BDWY requested core for the program table was not allocated.
Explanation: The patch address on the REP card is not a System action: None.
half-word boundary.
User response: Do the following:
System action: None.
1. Increase the REGION parameter in the EXEC card.
User response: Do the following: 2. Submit the job again.
1. Correct the problem.
2. Submit the job again. See the TPF Database Reference for more information about
offline pool maintenance.
See the TPF System Installation Support Reference for more
information about the loaders program. 000000000 NOT ENOUGH ROOM FOR SALTBL
Explanation: There is not enough room for the system
000000000 NOT APPLIED — PATCH CARD FORMAT allocator (SAL) table (SALTBL).
ERROR
System action: None.
Explanation: The format of this REP card is incorrect.
User response: None.
System action: None.
See the TPF System Installation Support Reference for more
User response: Do the following: information about loaders.
1. Correct the problem.
2. Submit the job again. 000000000 NOT FIRST RTL TAPE JOB CANCELLED.
MOUNT FIRST TAPE AND RESTART JOB.
See the TPF System Installation Support Reference for more
Explanation: For a multi-volume data set, the sequence for
information about the loaders program.
mounting the tape was incorrect.
426 TPF Messages (System Error, Offline, and Program Status Word)
000000000
See the TPF Database Reference for more information about User response: Do the following:
offline pool maintenance. 1. Submit the load again.
2. Contact your system support personnel if the problem
000000000 NOT HWD BDRY continues.
Explanation: The application program name (loader call Explanation: The program size for a file-resident program is
program card columns 21 through 24 or the programmed greater than the allocated size.
airlines reservation system (PARS) list entry) does not match System action: None.
the Z4 VCON name found in its BEGIN expansion while
processing TLDR. User response: Do the following:
428 TPF Messages (System Error, Offline, and Program Status Word)
000000000
Severity: 4
000000000 NOT LOADED — THIS AP PGM RECORD
NOT ALLOWED Explanation: The number of paths specified must not be
greater than the number specified in the NPATH parameter of
Explanation: An auxiliary loader critical program module
the SIP NETWK macro.
cannot be loaded by the auxiliary loader. Some such modules
are the auxiliary loader segments (CTLx) and OLD1. System action: None.
System action: None. User response: None.
User response: If these modules must be reloaded, then use
the general file loader to load them. 000000000 OBJECT MODULE IS CORRUPTED, MUST
BE RE-ASSEMBLED. PROGRAM LOAD IS
See the TPF System Installation Support Reference for more
IGNORED
information about the loaders program.
Explanation: An address in one of the text cards in the object
module is not within the address limits of the program.
000000000 NOT LOADED — UNKNOWN ERROR
DURING LINK System action: None.
Explanation: A bad error code was returned from the TPF User response: None.
linkage editor (LEDT).
See the TPF System Installation Support Reference for more
System action: None. information about the loaders program.
User response: Do the following:
1. Correct the problem. 000000000 OLD FORMAT TAPES ARE NOT
SUPPORTED — RUN ABORTED
2. Submit the job again.
Explanation: The primary real-time tape (RTC) was produced
See the TPF System Installation Support Reference for more by the TPF 3.1 system in a format not recognized by later
information about the loaders program. versions of the TPF system.
User response: None. 1. Check the tape drive status and remount the OLD tape.
2. If the error occurred after some programs were read in,
See TPF Program Development Support Reference for more enter the ZOLDR RECLAIM command.
information.
3. Enter the ZOLDR LOAD command again.
000000000 OS/VS SORT PGM ERROR CAUSED FILE 000000000 OVFL IS EXTRANEOUS WHEN RTP1 IS
REDUCTION PGM TERMINATION OF: CODED, OVFL IS IGNORED
name
Severity: 4
Where:
Explanation: OVFL and RTP1 are equivalent parameters. If
name the SIP RIATA macro coded with the OVFL parameter is from
The name of the sort program. a previous release, it can remain the same; otherwise, RTP1
should be coded in its place.
Explanation: See the appropriate publication in the OS/VS
library for the associated sort program diagnostics that will RIAT is still generated but the OVFL parameter is not used.
have occurred. File names that begin with SORT are those
used by the sort program for these options. System action: None.
See the TPF System Installation Support Reference for more See the TPF System Installation Support Reference for more
information about the loaders program. information about the loaders program.
000000000 OVER 50 PROGRAMS IN THIS TEST UNIT 000000000 PARS CARD EXPECTED .. JOB ABORTED
— REMAINING PROGRAMS NOT Explanation: The card following the loader load OPL card is
LOADED not a PARSvv card.
Explanation: A maximum of 50 file-resident programs may
System action: None.
be loaded from a test unit.
User response: Do the following:
System action: A surplus will be ignored.
1. Correct the error.
User response: None.
2. Submit the job again.
See the TPF Program Development Support Reference for more
information. See the TPF System Installation Support Reference for more
information about the loaders program.
Explanation: The base file address for the device referenced Explanation: The OPL list was found but no items were in it.
in the message, when combined with the number of modules
System action: The list is ignored and the load is continued.
for that device produces a file address range that overlaps the
file address range for the other device referenced in the User response: None.
message.
See the TPF System Installation Support Reference for more
System action: None. information about the loaders program.
User response: Do the following:
430 TPF Messages (System Error, Offline, and Program Status Word)
000000000
See the TPF System Installation Support Reference for more See the TPF System Installation Support Reference for more
information about the loaders program. information about the loaders program.
000000000 PARS LIST vv NOT AVAILABLE - LOAD 000000000 PATCH CARD OUT OF SEQUENCE
ENDS
Explanation: A REP card was read before a call program
Where: card.
vv The version of the parameter list. System action: None.
Explanation: ALDR could not find the OPL list for the User response: Do the following:
parameter version referenced in the message (specified in the
1. Put the REP card after the call program card of the
loader CC card) for use in building in-core directories.
program to be patched.
System action: The load ends. 2. Submit the job again.
User response: None.
See the TPF System Installation Support Reference for more
See the TPF System Installation Support Reference for more information.
information about the loaders program.
System action: The program named in the message is not 000000000 PERMANENT READ ERROR ON POOL
loaded. MAINTENANCE INPUT TAPE—EOF
ASSUMED
User response: Have your system programmer review the
IPAT and SALTBL entry for the program named in the Explanation: An irrecoverable read error was encountered
message. while processing SYSIN. It is treated as an end-of-file
indication since one of the possible causes is failure to write a information about the loaders program.
tape mark on the real-time tape.
432 TPF Messages (System Error, Offline, and Program Status Word)
000000000
000000000 POSITIONAL PARAMETER NOT “START” 000000000 PRIME DIRECTORY NOT FOUND —
OR “FINISH” RELOAD DISK
Severity: 12 Explanation: The system test compiler (STC) cannot find the
SDMF/DRIL directory on the unit test disk.
Explanation: The only two valid positional parameters for
the RIATA macro are START and FINISH. System action: None.
Explanation: This is a type E error. A user defined a field in a Explanation: While trying to patch a segment, this processor
DDATA statement with the POS operand coded for the last ordinal number was not found.
line of a 3270 CRT. This line is reserved for system messages.
System action: None.
System action: None.
User response: None.
User response: None.
See the TPF System Installation Support Reference for more
See the TPF Database Reference for more information about information about the loaders program.
mapping support installation.
System action: The system test compiler (STC) ignores the vv The version number.
current call. Explanation: The file address for the program specified in the
User response: None. message is not resolved in the system allocator (SAL) table.
See the TPF Program Development Support Reference for more System action: None.
information. User response: None.
See the TPF System Installation Support Reference for more
000000000 PRIME IS EXTRANEOUS WHEN RTP0 IS information about the loaders program.
CODED, PRIME IS IGNORED
Severity: 4 000000000 PROG nnnnvv CNTNS CODE BEF BEGIN,
PROG IGNORED
Explanation: PRIME and RTP0 are equivalent parameters. If
the RIATA macro coded with the PRIME parameter is from a Where:
previous release, it can remain the same; otherwise, RTP0
should be coded in its place. nnnn
The program name.
RIAT is still generated but the PRIME parameter is not used.
vv The version number.
System action: Nne.
Explanation: Program specified in the message contains code
User response: None. that ORGs back to a point before the end of the BEGIN
statement.
000000000 PRGM NOT LOADED, CORE ADDR System action: None.
INVALID, PROGRAM FOLLOWS
User response: None.
Explanation: The main storage address for a main storage
resident program is outside the boundaries specified in See the TPF System Installation Support Reference for more
keypoint A. The test program from the TUT is written to the information about the loaders program.
real-time tape (RTL) after the message.
System action: The program is not loaded. 000000000 PROG nnnnvv NOT ALLOCATED, PROG
NOT LOADED
User response: None.
Where:
See the TPF Program Development Support Reference for more
information. nnnn
The program name.
vv The version number.
System action: If the find request was for the programmed Explanation: There was a stop program trap of program not
airlines reservation system (PARS) list, a keypoint or one of in trapped status.
the core image restart area components then the load is
System action: Control is transferred to the next sequential
aborted. Otherwise the load continues.
instruction of the driver program.
User response: None.
User response: None.
See the TPF System Installation Support Reference for more
See the TPF Program Development Support Reference for more
information about the loaders program.
information.
434 TPF Messages (System Error, Offline, and Program Status Word)
000000000
See the TPF Program Development Support Reference for more User response: None.
information.
000000000 RECORD ID(X“xxxx”, C“cc”,D“ddd”) OUT OF 000000000 RECOUP GENERAL FILE RCD. NO. nnn IS
RANGE (1–65535) INVALID
Severity: 12 Where:
System action: None. Explanation: A directory record that is not valid was
encountered while processing the recoup general file. The
User response: None. relative position of the record within the data set is referenced
in the message.
000000000 REC/ORD FACE ERROR—NOT LOADED System action: The run continues but the error analysis will
not be valid for addresses contained within that directory.
Explanation: None.
User response: None.
System action: None.
See the TPF Database Reference for more information about
User response: None.
offline pool maintenance.
See TPF Operations for more information about online file
recoup.
000000000 RECOUP LOGGING RECORD OUT OF
SEQUENCE
000000000 RECORD ID IS ZERO
Explanation: The RCP items are either not in sequence or the
Explanation: The record ID is not valid. The first 44 bytes of gap is too big because of missing tapes.
the record header are written to the real-time tape (RTL).
System action: The job continues to run normally because
System action: The record is ignored. this message is only a warning.
User response: None. User response: Mount the correct RCP tapes in the correct
order.
See the TPF Program Development Support Reference for more
information.
000000000 RECOUP PHASE 2 HASH TABLE
OVERFLOW — RUN ABORTED
000000000 RECORD NO. OR SLOT NO. REQUESTED
TOO HI-ENTRY IGND Explanation: DYOPM uses a record ID hash table to generate
recoup phase 2 output. An overflow resulted because the
Explanation: The slot number requested does not exist in the number of unique pool record ID and subsystem user ID
record or the record number requested is greater than the combinations, which are kept in the record ID hash table, is
number of records being created. greater than the number of entries allocated for the table.
System action: None. System action: None.
User response: None. User response: Do the following:
See the TPF Program Development Support Reference for more 1. Specify the correct size for the record ID hash table on the
information. DYOPM parameter.
2. Submit the job again. If the problem continues, contact
your system programmer.
000000000 RECORD READ FROM THE RECOUP
LOGGING TAPE HAS INVALID ID
IGNORE=I ABORT RUN=A See the TPF Database Reference for more information about the
size of the record ID hash table.
Explanation: An error occurred because a record ID is not
valid on the RCP tape.
000000000 RECOUP SELF-START OF ERRONEOUSLY
System action: None. AVAILABLE ADDRESSES
User response: Do one of the following: Explanation: If erroneously available addresses are also on
v Enter I to ignore the error and continue recoup phase 2. the tape, this message will indicate the end of lost addresses
and the start of erroneously available addresses. The END OF
436 TPF Messages (System Error, Offline, and Program Status Word)
000000000
RECOUP SELD message indicates the end of all recoup User response: Do the following:
selective file dump records that appear on the real-time tape 1. Correct the error.
(RTL).
2. Submit the job again.
System action: None.
If this problem continues, see your system support personnel
User response: None.
for additional help.
See the TPF Database Reference for more information about
offline pool maintenance. See the TPF System Installation Support Reference for more
information about the loaders program.
000000000 REPLY ‘Y’ IF AN INPUT TAPE IS TO BE
PROCESSED; ELSE REPLY ‘N’ 000000000 RIATA “FINISH” OUT OF SEQUENCE
Explanation: The program wants to know whether SYSIN Severity: 12
should be opened. This message appears before processing the
first input tape and again each time that End of File is raised Explanation: A RIATA FINISH was already coded or was not
for SYSIN. preceded by a RIATA START.
User response: If there is a primary real-time tape (RTA) or User response: None.
RCP tape to be processed (or any more to be processed), then
reply Y. Otherwise, reply N.
000000000 RIATA “START” OUT OF SEQUENCE
See the TPF Database Reference for more information about
Severity: 12
offline pool maintenance.
Explanation: A START or FINISH was already coded.
000000000 REQUESTED PILOT SYSTEM NOT FOUND System action: None.
ON PILOT TAPE
User response: None.
Explanation: The pilot system specified on RUNID was not
found on the mounted pilot tape.
000000000 RIGHT ('S MISSING ON CNTRL CARD/
System action: None. ASSUMED
User response: None. Explanation: None.
See the TPF Program Development Support Reference for more System action: None.
information.
User response: None.
000000000 RESTORE PARAMETER INVALID See the TPF System Installation Support Reference for more
information about variable cross references.
Severity: 12
Explanation: The only two valid options for this parameter 000000000 RUN ABORTED, RCP INPUT HAD
are RESTORE=YES or RESTORE=NO. INCORRECT TIME STAMP
System action: None. Explanation: The time stamps for all the RCP tapes are not
the same. This discrepancy is probably because the RCP tapes
Severity: None.
are from different recoup runs.
System action: The job is ended.
000000000 RETRIEVAL ERROR OF A DUMP BLOCK
User response: Do the following:
Explanation: SERRC 0001E5 was issued unless a dump
already given as the error is due to hardware. If the error was 1. Mount the correct RCP tapes.
on the retrieval of a dump header block then a 3705-DUMP 2. Start the job again.
**** LOST DUE TO FILE RETRIEVAL ERROR message is sent
to the originating terminal.
000000000 SAL TABLE VERSION NOT GIVEN — JOB
System action: None. ABORTED
User response: None. Explanation: When using the E-type loader, the version
number of the system allocator (SAL) table (SALTBL) to be
used was not given on the first input card. Alternatively, when
000000000 RETURN CODE INVALID — NOTIFY
using the auxiliary loader, the second card in the deck was not
SUPPORT
a SALVERS card.
Explanation: The return code from the TPF linkage editor
System action: None.
(LEDT) was not valid.
User response: Do the following:
System action: None.
1. Provide the information.
000000000 SDMU CREATE CARD FOUND IN UPDATE User response: Do the following:
RUN — IGNORED 1. Correct the input.
438 TPF Messages (System Error, Offline, and Program Status Word)
000000000
Severity: 4
000000000 SORT UNSUCCESSFUL. TERMINAL
ACTIVITY — REPORT WILL NOT BE Explanation: The STATUS operand specified in the SLING
PRINTED macro was not one of the following:
v RO
Explanation: This message is printed in place of the
requested terminal activity reports. File names starting with v SO
MT are those used by sort for this option. v UP
System action: None. v DOWN.
See TPF Operations for more information about system User response: If the default is not acceptable, correct the
performance. input and rerun Phase 1 or patch the generated SCK record at
the LCFnn tag.
See the TPF System Installation Support Reference for more User response: Do the following:
information about the loaders program. 1. Correct the input.
2. Rerun Phase 1.
000000000 TABLE GENERATION SUPPRESSED
Severity: 8 000000000 THE RTC TAPE DOES NOT HAVE A xx
RECORD FOR THIS FILE
Explanation: This message follows any of the preceding
severe error messages. Explanation: The RTC tape is missing all or part of the
required data collection record referenced in the message. The
System action: None. tape may not be a data collection tape. If it is, the LABEL field
440 TPF Messages (System Error, Offline, and Program Status Word)
000000000
See TPF Operations for more information about system System action: None.
performance.
User response: None.
See the TPF Program Development Support Reference for more
000000000 THE RTC TAPE DOES NOT HAVE A DB
information.
RECORD FOR THIS FILE
See the TPF Program Development Support Reference for more Explanation: More than the maximum number of unique
information. keypoints are being loaded.
can handle only 100 new records at a time. If more than 100
000000000 TRAP ADDRESS NOT WITHIN DRIVER —
records are given, SDMU cannot handle them.
TRPMT yyyyyy
System action: No new library is created because of this
Where:
condition.
yyyyyy
User response: None.
The value for TRPMT.
See the TPF Program Development Support Reference for more
Explanation: The P2 parameter has a displacement greater
information.
than 1055.
System action: Control is transferred to the next sequential
000000000 TOO MANY REP CARDS — INCREASE
instruction in the drive program.
MAX NUMBER OF PATCHES.
User response: None.
Explanation: The number of REP cards in the load deck
exceeds the default or the number specified on the PTCHNBR See the TPF Program Development Support Reference for more
parameter. information.
System action: None.
000000000 TUT NOT RESERVED
User response: Do the following:
1. Increase the number of REP cards permitted through the Explanation: A start test (system test vehicle (STV) mode)
PTCHNBR parameter. ZSTVS START RUNID command was entered but the test unit
tape was not reserved in the TPF system. The message and the
2. Submit the job again.
card involved are printed on the same line.
See the TPF System Installation Support Reference for more System action: None.
information about the loaders program.
User response: Do the following:
1. Reset the test system.
000000000 TOO MANY UNRESOLVED VCONS — JOB
2. Restart the test.
ABORTED
Explanation: The unresolved V-Constants (V-Cons) Table See the TPF Program Development Support Reference for more
(UNRESAD) is too small to maintain all of the unresolved information.
V-con information for this load deck.
See the TPF Database Reference for more information about System action: The entry is exited.
mapping support installation. User response: Do the following:
1. Verify the format of the command.
442 TPF Messages (System Error, Offline, and Program Status Word)
000000000
See the TPF Program Development Support Reference for more Explanation: The selective file trace (SFT) halt message is
information. issued when SFT is not active.
System action: The entry is exited.
000000000 UNABLE — INVALID ORDINAL RANGE
User response: None.
Explanation: The user specified a negative ordinal range with
See the TPF Program Development Support Reference for more
an N or S type file address format.
information.
System action: The entry is exited.
User response: Enter the command again and specify the 000000000 UNABLE TO IDENTIFY INPUT FOR
proper ordinal range. OBJECT MODULE
See the TPF Program Development Support Reference for more Explanation: An object card that is not valid was
information. encountered.
System action: None.
000000000 UNABLE — INVALID RECORD TYPE
User response: None.
Explanation: The record type is not recognized by the file
See the TPF Program Development Support Reference for more
address compute program (FACE) and, therefore, is not valid
information.
for the user.
See the TPF Program Development Support Reference for more User response: Do the following:
information. 1. Correct the file record.
2. Try the job again.
000000000 UNABLE — NUMBER OF RECORDS
REQUESTED EXCEEDS MAXIMUM See the TPF Database Reference for more information about
mapping support installation.
Explanation: The number of records may not exceed 82 for A
type address format and 420 for the N or S type address
format. The number of records in the input message exceeded 000000000 UNABLE TO READ POINTER TO CTKX
the maximum.
Explanation: An error occurred because the TPF system is
System action: The entry is exited. unable to read the pointer to CTKX.
User response: Enter the command again and specify the System action: None.
valid number of records.
User response: None.
See the TPF Program Development Support Reference for more
information. See the TPF System Installation Support Reference for more
information about loaders.
000000000 UNABLE TO RETRIEVE THESE RECORDS: 000000000 UNDEFINED CARD TYPE OR SEQUENCE
xxxxxxxx Hardware Error yyyyyyyy Invalid ERROR FOLLOWING CARD IGNORED
File Address
Explanation: None.
Where:
System action: None.
xxxxxxxx
User response: None.
The hardware error.
yyyyyyyy See the TPF Program Development Support Reference for more
information.
The file address.
Explanation: The file retrieval errors occurred because of a
hardware error or a file address that is not valid. The message 000000000 UNKNOWN CARDS FOUND..SEE FULL
contains a series of sub messages containing the file address LOAD LIST
followed by the reason these records are not able to be Explanation: Extraneous cards were found in the load deck.
retrieved.
System action: None.
System action: Selective file dump (SFDT) processing is
continued to completion, dumping the records that can be User response: Do the following:
retrieved. 1. Correct the error.
User response: Do the following: 2. Submit the job again if necessary.
1. Determine the cause of the error.
See the TPF System Installation Support Reference for more
2. Correct the error.
information about the loaders program.
000000000 UNABLE TO WRITE POINTER TO CTKX Explanation: FIND returned an unexpected return code.
Explanation: An error occurred because the system is unable System action: None.
to writer the pointer to CTKX.
User response: Run the job again. If the error continues, see
System action: None. your system support personnel for additional help.
User response: None. See the TPF System Installation Support Reference for more
information about the loaders program.
See the TPF System Installation Support Reference for more
information about loaders.
000000000 UNUSUAL CONDITION ON DISK —
ENTRY IGNORED
000000000 UNABLE — USERID DID NOT INITIATE
SFT Explanation: Either the record is not available on disk or the
disk was not loaded properly.
Explanation: The user ID trying to halt selective file trace
(SFT) does not match the user ID that initiated SFT. System action: None.
User response: None. See the TPF Program Development Support Reference for more
information.
See the TPF Program Development Support Reference for more
information.
000000000 USER EXIT PARAMETER INVALID
444 TPF Messages (System Error, Offline, and Program Status Word)
000000000
User response: None. Note: The linkage editor (LEDT) does not resolve an ENTDC
nor an ENTNC to a core-fast program.
See the TPF System Installation Support Reference for more
information about the multiple assembly and compilation System action: None.
program.
User response: None.
See the TPF System Installation Support Reference for more
000000000 VFA FIXED PARAMETER INVALID
information about the loaders program.
Severity: 12
Explanation: The only valid options for this parameter are 000000000 WARNING — CSECT TBL > ALLOC LNG —
VFAF=DELAY, VFAF=IMMED, and VFAF=NO. NO CP PATCH
System action: None. Explanation: The size of the CP CSECT names module
(CPLKMP) is too small to contain the names of all the CP
User response: None. CSECTs.
System action: None.
000000000 VFAF SYNC AND LOCKF=PROC ARE
INCOMPATIBLE User response: No CP CSECT module may be patched. This
problem can be corrected by correcting the CPLKMP module.
Severity: 12
See the TPF System Installation Support Reference for more
Explanation: The VFAF=SIMMED or VFAF=SDELAY information about the loaders program.
parameters that were coded on the RIATA macro indicate
virtual file access (VFA) synchronization was requested. VFA
synchronization is not compatible with processor locking and 000000000 WARNING - DUPLICATE IATA/TIADDR
requires control unit locking (LOCKF=DASD). ENCOUNTERED - CHECK LISTING
Explanation: The only valid options for this parameter are System action: None.
VFAP=DELAY, VFAP=IMMED, and VFAP=NO. User response: None.
System action: None. See TPF ACF/SNA Network Generation for more information
User response: None. about the offline ACF/SNA table generation program (OSTG)
error messages.
System action: None. User response: Add the loader load ELDR clear card to the
load deck if the E-type loader structures need to be cleared.
User response: None.
See the TPF System Installation Support Reference for more
information about the loaders program.
000000000 WARNING — nnnnvv WAS LOADED WITH
UNRESOLVED XTRNS
000000000 WARNING — G.FILE CONFIG CARD NOT
Where: SUPPORTED, IGNORED
nnnn Explanation: The G.FILE CONFIG card is not required in the
The program name. TLDR load deck.
vv The version number. System action: The card is ignored.
Explanation: The program name and the unresolved external
User response: Remove the G.FILE CONFIG card from the information about the loaders program.
TLDR load deck.
See the TPF System Installation Support Reference for more 000000000 WARNING — PGM HAS UNRESOLVED
information about the loaders program. V-CONS
See the TPF System Installation Support Reference for more 000000000 WARNING—PROG-MOD-BASE CLEAR
information about the loaders program. CARD INPUT, PROGRAM MODULE BASE
WILL BE CLEARED
000000000 WARNING GF MISSING KEYPT xxxx Explanation: The offline loader set an indicator that will
cause the #XPRGn directory to be initialized when the online
Where: portion of this load is run.
xxxx
The name of the keypoint missing from the general file Note: When the #XPRGn directory is initialized, all ISO-C
keypoint area. programs previously loaded to the online system image
will be lost.
Explanation: For the basic subsystem (BSS), the general file
must be reloaded with the missing keypoint. For a non-BSS System action: None.
subsystem, the general file must be reloaded with the missing
User response: Do one of the following:
keypoint if the keypoint is defined as a subsystem-unique
kyepoint. The subsystem-unique keypoints are defined in v To initialize the #XPRG directory, continue to run the load
CTKX (see CX0IN1). process.
v Remove the LOADER PROG-MOD-BASE CLEAR card from
System action: None.
the load deck and run the offline loader program again.
User response: None.
See the TPF System Installation Support Reference for more
See the TPF System Installation Support Reference for more
information about the LOADER PROG-MOD-BASE CLEAR
information about the loaders program.
card.
User response: Remove the image clear card from the TLDR System action: The REP card is ignored and processing
load deck. continues.
See the TPF System Installation Support Reference for more User response: Do the following:
information about the loaders program. 1. Check the load deck.
2. Move or remove the REP card in error.
000000000 WARNING NO LDT CARD FOUND
Explanation: There was no LDT card in the load deck. Load 000000000 WCC NOT CODED CORRECTLY,
may not be complete. MAP—xxxx—TERMINATED
446 TPF Messages (System Error, Offline, and Program Status Word)
000000000 • *E104*
in the message with the DPANL WCC operand options was Operations for more information about the ZSTOP command.
not coded according to specifications or the option is
misspelled.
000000000 ZSTOP UNABLE USER—ID DID NOT
System action: The map is not created. INITIATE RTT
User response: Do the following: Explanation: The subsystem ID of the user did not match
1. Correct the WCC option that is not valid. that of the real-time tape (RTT) initiator.
2. Run the job again. System action: The entry is exited.
User response: None. Explanation: The table in the system test compiler (STC)
loader used to accumulate 1055 or 381 byte addresses as they
See the TPF Database Reference for more information about the are read in is full.
3705 communications controller.
System action: None.
Explanation: A REP card for ICDF, ACPL, FCTB, IPLB, SIGT, See the TPF Program Development Support Reference for more
or RIAT was found but the version on the REP card did not information.
match the version on the loader load card.
User response: None. Explanation: The symbolic name on an RSC input definition
statement is not specified.
See the TPF System Installation Support Reference for more
information about the loaders program. System action: Processing is continued with the next input
definition statement.
See TPF ACF/SNA Network Generation for more information User response: Do the following:
about the OSTG program. 1. Correct the input definition statement that is in error.
2. Run the OSTG job again.
*E105* SYNTAX ERROR
See TPF ACF/SNA Network Generation for more information
Explanation: The input definition statement could not be
about the OSTG program.
parsed correctly.
System action: Processing is continued with the next input
*E114* NAME GREATER THAN 8. STMNT
definition statement.
FLUSHED.
User response: Do the following:
Explanation: The symbolic name on an input definition
1. Correct the error. statement exceeded 8 characters in length.
2. Run the OSTG job again.
System action: Processing is continued with the next input
definition statement.
See TPF ACF/SNA Network Generation for more information
about the offline ACF/SNA table generation (OSTG) program. User response: Do the following:
1. Correct the input definition statement that is in error.
*E110* STATEMENT OUT OF LOGICAL 2. Run the OSTG job again.
SEQUENCE
See TPF ACF/SNA Network Generation for more information
Explanation: The input definition statement is not in logical
about the offline ACF/SNA table generation (OSTG) program.
sequence.
448 TPF Messages (System Error, Offline, and Program Status Word)
*E201* • *E207*
See TPF ACF/SNA Network Generation for more information information about system generation and the MSGRTA
about the offline ACF/SNA table generation (OSTG) program. statements that are used to create the ANT deck.
*E208* SDA GREATER THAN MAXIMUM *E213* RECVRY AND PSV KEYWORDS ARE
ALLOWED MUTUALLY EXCLUSIVE
Explanation: The symbolic device address (SDA) defined on Explanation: Both the RECVRY and PSV parameters were
the TG2SDA parameter is not valid. A valid range for the SDA specified in the RSC input definition statement. Only one of
is from X'0001' to X'7FFF'. these parameters can be specified in the RSC input definition
statement.
System action: Processing is continued.
System action: Processing is continued.
User response: Do not code the TG2SDA parameter on the
CTC statement because this parameter is no longer supported. User response: Do the following:
See TPF ACF/SNA Network Generation for more information 1. Specify either the RECVRY parameter or the PSV
about the offline ACF/SNA table generation (OSTG) program. parameter (but not both) in the RSC input definition
statement.
2. Run the OSTG job again.
*E209* VRTO GREATER THAN MAXIMUM
ALLOWED
See TPF ACF/SNA Network Generation for more information
Explanation: The virtual route time-out (VRTO) value about the offline ACF/SNA table generation (OSTG) program.
specified by the VRTO parameter is larger than the maximum
allowed. The maximum allowed is 65 535.
*E214* SUBAREA VALUE NOT PREVIOUSLY
System action: Processing is continued with the value DEFINED IN CDRM STATEMENT
defaulted to 0.
Explanation: The subarea address defined in the CTC
User response: Do the following: statement was not defined previously in the CDRM statement.
1. Change the value of the VRTO parameter so the value is A link to an undefined subarea is not valid.
less than 65 535. System action: Processing is continued.
2. Run the OSTG job again.
User response: Do one of the following:
See TPF ACF/SNA Network Generation for more information v Correct the CTC statement.
about the offline ACF/SNA table generation (OSTG) program. v Add a CDRM statement for the remote subarea.
See TPF ACF/SNA Network Generation for more information System action: Processing is continued.
about the offline ACF/SNA table generation (OSTG) program. User response: Ensure the correct length is specified for
LEID.
*E211* MAXIMUM NAMES ALLOWED FOR ANT See TPF ACF/SNA Network Generation for more information
EXCEEDED about the offline ACF/SNA table generation (OSTG) program.
Explanation: The maximum of 255 application program
names for the ANT deck was exceeded. *E216* IATA AND LEID KEYWORDS ARE
System action: Processing is continued. MUTUALLY EXCLUSIVE
450 TPF Messages (System Error, Offline, and Program Status Word)
*E220* • *E234*
1. Specify either the IATA parameter or the LEID parameter See TPF ACF/SNA Network Generation for more information
(but not both) in the RSC definition statement. about the offline ACF/SNA table generation (OSTG) program.
2. Run the OSTG job again.
*E231* LEID NOT VALID ON RSCSET
See TPF ACF/SNA Network Generation for more information STATEMENT
about the offline ACF/SNA table generation (OSTG) program.
Explanation: The LEID parameter is not valid in the RSCSET
statement.
*E220* MAX NUMBER OF CTC-LINKS TO THIS
SUBAREA EXCEEDED System action: Processing is continued.
Explanation: A maximum of 2 CTC links can be defined for a User response: Do the following:
subarea. 1. Delete the LEID parameter from the RSCSET statement.
System action: Processing is continued. 2. Specify the LEID parameter in each RSC definition
statement.
User response: Ensure that only 2 CTC links are defined for
3. Run the OSTG job again.
the subarea.
See TPF ACF/SNA Network Generation for more information See TPF ACF/SNA Network Generation for more information
about the offline ACF/SNA table generation (OSTG) program. about the offline ACF/SNA table generation (OSTG) program.
*E227* LU INCOMPATIBLE WITH CCTYPE VALUE *E232* LUMOD FOR LUTYPE NOT SUPPORTED
Explanation: The values specified for the LUTYPE and Explanation: The model number specified for the logical unit
CCTYPE parameters are not compatible with each other. (LU) type is not supported.
*E235* LEID DOES NOT EXCEED THE HIGHEST *E281* SUBAREA FOR GENNING TPF HOST
SYMBOLIC LINE NUMBER INCORRECT
Explanation: The logical endpoint identifier (LEID) must be Explanation: The subarea specified for this TPF host system
greater than the highest symbolic line number defined in the is inconsistent with a previous subarea definition.
TPF system.
System action: Processing is continued.
System action: Processing is continued.
User response: Do the following:
User response: Do the following: 1. Correct the input definition statement that is in error.
1. Change the LEID value. 2. Run the OSTG job again.
2. Run the OSTG job again.
See TPF ACF/SNA Network Generation for more information
See TPF ACF/SNA Network Generation for more information about the offline ACF/SNA table generation (OSTG) program.
about the offline ACF/SNA table generation (OSTG) program.
1. Delete some IBM-reserved PSV names from the RSC input User response: Do the following:
definition statement to ensure there are only 32 PSV names 1. Correct the input definition statement that is in error.
specified.
2. Run the OSTG job again.
2. Run the OSTG job again.
See TPF ACF/SNA Network Generation for more information
See TPF ACF/SNA Network Generation for more information about the offline ACF/SNA table generation (OSTG) program.
about the offline ACF/SNA table generation (OSTG) program.
452 TPF Messages (System Error, Offline, and Program Status Word)
*E293* • *I401*
required for this type of input definition statement. System action: Processing is continued.
User response: Do the following: 1. Add the correct name of the CTC link to the input
definition statement that is in error.
1. Add the required parameter to the input definition
statement that is in error. 2. Run the OSTG job again.
Explanation: The symbolic name was not specified on the *E801* DUPLICATE LEID(S) FOUND, CHECK
NCP input definition statement. Each NCP name must be LISTING
unique.
Explanation: Duplicate logical endpoint identifiers (LEIDs)
System action: Processing is continued. were found after processing all the input definition statements.
User response: Do the following: Each LEID must be unique to the TPF system. The OSTG
1. Add the correct symbolic name to the NCP input listing identifies the duplicate LEIDs found.
definition statement that is in error.
System action: The OSTG run is canceled.
2. Run the OSTG job again.
User response: Do the following:
See TPF ACF/SNA Network Generation for more information 1. Correct the input to ensure that each resource is defined
about the offline ACF/SNA table generation (OSTG) program. with a unique LEID.
2. Run the OSTG job again.
*E295* CDRMNAME MISSING
See TPF ACF/SNA Network Generation for more information
Explanation: The symbolic name was not specified on the about the offline ACF/SNA table generation (OSTG) program.
CDRM input definition statement. Each CDRM name must be
unique.
*I401* 3614 SPECIFIED, VALUES IMPOSED ARE
System action: Processing is continued.
Explanation: LUTYPE=3614 was specified in the RSC input
User response: Do the following: definition statement. As a result, the offline ACF/SNA table
1. Add the correct symbolic name to the CDRM input generation (OSTG) program imposes values for some of the
definition statement that is in error. other parameters.
2. Run the OSTG job again. Additional severity I messages follow this message. The
additional messages show the actual imposed values.
See TPF ACF/SNA Network Generation for more information
about the offline ACF/SNA table generation (OSTG) program. System action: The imposed values override all other
specifications for the parameters. Any additional parameters
that were specified, but are not relevant to this RSC type, are
*E296* CTC NAME MISSING ignored.
Explanation: The symbolic name was not specified in the User response: None.
CTC input definition statement. Every CTC link must have a
unique name. See TPF ACF/SNA Network Generation for more information
about the OSTG program.
See TPF ACF/SNA Network Generation for more information User response: None.
about the OSTG program. See TPF ACF/SNA Network Generation for more information
about the offline ACF/SNA table generation (OSTG) program.
*I406* 360X SPECIFIED, VALUES IMPOSED ARE
454 TPF Messages (System Error, Offline, and Program Status Word)
*I461* • *I488*
This message is preceded by another severity I message based See TPF ACF/SNA Network Generation for more information
on the logical unit (LU) type. about the OSTG program.
See TPF ACF/SNA Network Generation for more information User response: None.
about the offline ACF/SNA table generation (OSTG) program.
See TPF ACF/SNA Network Generation for more information
about the offline ACF/SNA table generation (OSTG) program.
*I463* CHAIN=NO
Explanation: The CHAIN=YES value is allowed only for *I485* NO PSV ENTRY
multichannel links and virtual circuits. The CHAIN=NO value Explanation: The resource being defined by this input
is imposed for all other X.25 resources. statement will be generated with no process selection vector
System action: The imposed values are used when creating (PSV) entry, regardless of the default or explicit specification
the RRT entry for this resource. of any other option for this parameter.
User response: None. System action: No PSV name is used when creating the RRT
entry for this resource.
See TPF ACF/SNA Network Generation for more information
about the offline ACF/SNA table generation (OSTG) program. User response: None.
User response: None. See TPF ACF/SNA Network Generation for more information
about the offline ACF/SNA table generation (OSTG) program.
*I489* AX001 SPECIFIED, VALUES IMPOSED ARE *I493* FMMR SPECIFIED, VALUES IMPOSED ARE
Explanation: The resource being defined by this input Explanation: The resource being defined by this input
definition statement will be generated with the definition statement will be generated with the
LUTYPE=AX0001 value imposed regardless of the defaults or LUTYPE=FMMR value imposed regardless of the defaults or
explicit specification of any other option for this parameter. explicit specification of any other option for this parameter.
Additional severity I messages follow this message. The Additional severity I messages follow this message. The
additional messages show the actual imposed values. additional messages show the actual imposed values.
System action: The imposed values are used when creating System action: The imposed values are used when creating
the RRT entry for this resource. the RRT entry for this resource.
User response: None. User response: None.
See TPF ACF/SNA Network Generation for more information See TPF ACF/SNA Network Generation for more information
about the offline ACF/SNA table generation (OSTG) program. about the offline ACF/SNA table generation (OSTG) program.
*I490* AX002 SPECIFIED, VALUES IMPOSED ARE *I494* NEF SPECIFIED, VALUES IMPOSED ARE
Explanation: The resource being defined by this input Explanation: The resource being defined by this input
definition statement will be generated with the definition statement will be generated with the LUTYPE=NEF
LUTYPE=AX002 value imposed regardless of the defaults or value imposed regardless of the defaults or explicit
explicit specification of any other option for this parameter. specification of any other option for this parameter.
Additional severity I messages follow this message. The Additional severity I messages follow this message. The
additional messages show the actual imposed values. additional messages show the actual imposed values.
System action: The imposed values are used when creating System action: The imposed values are used when creating
the RRT entry for this resource. the RRT entry for this resource.
User response: None. User response: None.
See TPF ACF/SNA Network Generation for more information See TPF ACF/SNA Network Generation for more information
about the offline ACF/SNA table generation (OSTG) program. about the offline ACF/SNA table generation (OSTG) program.
*I491* MCHLU SPECIFIED, VALUES IMPOSED *I495* FTPI SPECIFIED, VALUES IMPOSED ARE
ARE
Explanation: The resource being defined by this input
Explanation: The resource being defined by this input definition statement will be generated with the LUTYPE=FTPI
definition statement will be generated with the value imposed regardless of the defaults or explicit
LUTYPE=MCHLU value imposed regardless of the defaults or specification of any other option for this parameter.
explicit specification of any other option for this parameter.
Additional severity I messages follow this message. The
Additional severity I messages follow this message. The additional messages show the actual imposed values.
additional messages show the actual imposed values.
System action: The imposed values are used when creating
System action: The imposed values are used when creating the RRT entry for this resource.
the RRT entry for this resource.
User response: None.
User response: None.
See TPF ACF/SNA Network Generation for more information
See TPF ACF/SNA Network Generation for more information about the offline ACF/SNA table generation (OSTG) program.
about the offline ACF/SNA table generation (OSTG) program.
456 TPF Messages (System Error, Offline, and Program Status Word)
*I703* • *S004*
3. Run the OSTG job again. 1. Correct the CPUID value and the SDPSID value specified
on the PARM parameter so the value is alphanumeric.
See TPF ACF/SNA Network Generation for more information 2. Run the OSTG job again.
about the OSTG program.
See TPF ACF/SNA Network Generation for more information
about the offline ACF/SNA table generation (OSTG) program.
*S005* OSTG CANCELLED DUE TO EXCESSIVE
ERRORS
Explanation: The offline ACF/SNA table generation (OSTG) *S032* EXEC PARM SDPSID FORMAT ERROR
program run is canceled when more than 100 errors with Explanation: The value of SDPSID specified on the PARM
severity E messages are encountered in the input. parameter in the EXEC statement of the JCL used to run the
System action: The table generation process is ended. offline ACF/SNA table generation (OSTG) program is not
coded correctly.
User response: Do the following:
System action: The table generation process is ended.
1. Correct the errors.
2. Run the OSTG job again. User response: Do the following:
1. Correct the SDPSID value on the PARM parameter.
See TPF ACF/SNA Network Generation for more information 2. Run the OSTG job again.
about the OSTG program.
See TPF ACF/SNA Network Generation for more information
*S021* EXEC PARM CPUID INVALID about the offline ACF/SNA table generation (OSTG) program.
*S022* EXEC PARM CPUID FORMAT ERROR See TPF ACF/SNA Network Generation for more information
about the offline ACF/SNA table generation (OSTG) program.
Explanation: The value of CPUID specified for the PARM
parameter in the EXEC statement of the JCL used to run the
offline ACF/SNA table generation (OSTG) program can only *S051* EXEC PARM GENTYPE INVALID/FORMAT
be specified as 1 character. ERR
System action: The table generation process is ended. Explanation: The value specified for GENTYPE on the PARM
parameter in the EXEC statement of the JCL used to run the
User response: Do the following: offline ACF/SNA table generation (OSTG) program is not one
1. Correct the CPUID value specified on the PARM parameter of the following:
so the value is only 1 character. Value Description
2. Run the OSTG job again.
GEN Specify for a full generation run.
See TPF ACF/SNA Network Generation for more information VAL Specify for a validation-only run.
about the offline ACF/SNA table generation (OSTG) program.
System action: The table generation process is ended.
*S031* EXEC PARM SDPSID CPUID INVALID User response: Do the following:
1. Correct the GENTYPE value so it is GEN or VAL.
Explanation: One of the values specified for CPUID and
SDPSID on the PARM parameter in the EXEC statement of the 2. Run the OSTG job again.
JCL used to run the offline ACF/SNA table generation (OSTG)
program is not alphanumeric (A to Z or 0 through 9). See TPF ACF/SNA Network Generation for more information
about the offline ACF/SNA table generation (OSTG) program.
System action: The table generation process is ended.
User response: Do the following:
458 TPF Messages (System Error, Offline, and Program Status Word)
*S061* • *S297*
See TPF ACF/SNA Network Generation for more information User response: Do the following:
about the offline ACF/SNA table generation (OSTG) program. 1. Correct the value that is not valid.
2. Run the OSTG job again.
*S091* EXEC PARM CPUID MISSING
See TPF ACF/SNA Network Generation for more information
Explanation: The value of CPUID specified for the PARM
about the offline ACF/SNA table generation (OSTG) program.
parameter in the EXEC statement of the JCL used to run the
offline ACF/SNA table generation (OSTG) program was not
found. *S099* EXEC PARM SYNTAX ERROR FOUND
System action: The table generation process is ended. Explanation: The PARM parameter in the EXEC statement of
the JCL used to run the offline ACF/SNA table generation
User response: Do the following:
(OSTG) program could not be parsed correctly.
1. Specify the CPUID value for the PARM parameter.
System action: The table generation process is ended.
2. Run the OSTG job again.
User response: Do the following:
See TPF ACF/SNA Network Generation for more information 1. Correct the PARM parameter.
about the offline ACF/SNA table generation (OSTG) program.
2. Run the OSTG job again.
*S092* EXEC PARM PILOTID MISSING See TPF ACF/SNA Network Generation for more information
about the offline ACF/SNA table generation (OSTG) program.
Explanation: The value of PILOTID specified for the PARM
parameter in the EXEC statement of the JCL used to run the
offline ACF/SNA table generation (OSTG) program was not *S111* PREMATURE END OF FILE
found.
Explanation: The end-of-file condition was raised on the
System action: The table generation process is ended. OSTG input data set before a valid NCP, CTC, or ALS
statement was found.
User response: Do the following:
1. Specify the PILOTID value of the PARM parameter. The NCP or ALS statement must be the last statement
processed.
2. Run the OSTG job again.
System action: The OSTG run is canceled.
See TPF ACF/SNA Network Generation for more information
User response: Do the following:
about the offline ACF/SNA table generation (OSTG) program.
1. Correct the OSTG input data set.
2. Run the OSTG job again.
*S095* EXEC PARM CPUID NOT = 1ST SDPSID
CPU
See TPF ACF/SNA Network Generation for more information
Explanation: The first CPU ID specified for the SDPSID value about the offline ACF/SNA table generation (OSTG) program.
for the PARM parameter in the EXEC statement of the JCL
used to run the offline ACF/SNA table generation (OSTG)
program is not equal to the CPUID value specified for the *S297* CPUID ON ANTDEF NOT = EXEC PARM
PARM parameter in the same EXEC statement. CPUID
System action: The table generation process is ended. Explanation: The value specified for the CPUID parameter
on the ANTDEF input definition statement is not the same as
User response: Do the following: the CPUID value specified for the PARM parameter in the
1. Correct the CPUID value or the SDPSID value, whichever EXEC statement of the JCL used to run the offline ACF/SNA
is appropriate for the error. table generation (OSTG) program.
460 TPF Messages (System Error, Offline, and Program Status Word)
*W410* • *W700*
xxxxxxxx
The parameter name.
00FFFFFF Reference: Program status word (PSW) for the IPL program
wait states.
Explanation: Loaded by IPLB when a CC3 is returned from a
000A0000 xxxxxxxx set clock (SCK) instruction indicating that the Time-Of-Day
Reference: Program status word (PSW) for the IPL program (TOD) clock is not operational.
wait states.
System action: None.
Where:
User response: See TPF System Generation for more
xxxxxxxx information about system clocks.
The address of the initial program load (IPL) restart area
(defined by the IB5CT DSECT in IB0CT).
000A0000 000003FF
Explanation: Loaded by IPLB when a program calls the
dump routine a second time while a dump is in progress. The Reference: Program status word (PSW) for the IPL program
second call can be a result of a program check or a branch wait states.
from an IPLB error routine. If a program check occurred, the Explanation: Loaded by IPLB at the normal end of dump
program interruption code in the prefix page indicates the processing.
type of exception. The addresses of the page and segment
tables and the register save area are contained in the IPL System action: None.
restart area. The page and segment tables and the register save
User response: None.
area can be dumped using the stand-alone dump (SADUMP)
utility. See TPF Program Development Support Reference for more
information about the SADUMP utility. 000AC000 00CCD01E
System action: None. Reference: Program status word (PSW) for the system error
program wait states. The low-order word of each disabled
User response: None.
wait PSW loaded by CPSE does not address an instruction
but, instead, contains a unique 3–byte identifier.
000A0000 00xxxxF6
Explanation: System virtual memory (SVM) is not stable;
Reference: Program status word (PSW) for the IPL program unable to switch from real mode to home address space.
wait states.
System action: None.
Where:
User response: Inspect the control registers. See TPF
xxxx Application Programming and TPF Main Supervisor Reference for
The ID of the incorrect record. more information about system error processing.
System action: None. Reference: Program status word (PSW) for the system error
program wait states. The low-order word of each disabled
User response: None. wait PSW loaded by CPSE does not address an instruction
but, instead, contains a unique 3–byte identifier.
000A0000 00xxxxF8 Explanation: CCCPSDF recursion failed.
Reference: Program status word (PSW) for the IPL program System action: The action cannot continue.
wait states.
User response: See TPF Application Programming and TPF
Where: Main Supervisor Reference for more information about system
xxxx error processing.
The cumulative device and subchannel status from the
failing device. 000A0000 0000DEAD
Explanation: Loaded by IPL2 when an irrecoverable Reference: Program status word (PSW) for the IPL program
input/output (I/O) error is detected. wait states.
System action: None. Explanation: Loaded by IPLB when an irrecoverable
User response: None. input/output (I/O) error is found during dump processing.
System action: None.
System action: Perform an initial program load (IPL) with 000A0000 00DEAD07
the CLEAR option to recover from this disabled wait state.
Reference: Disabled wait states related to the machine
User response: See TPF Main Supervisor Reference for more interruption handler. The low-order 3 bytes of each program
information about machine check handling. See TPF status word (PSW) contains an identifier.
Application Programming and TPF Main Supervisor Reference for
Explanation: While handling a machine check interruption
more information about system error processing. See TPF
that was reporting catastrophic damage, the machine check
Concepts and Structures for more information about error
FLIH could not perform a SIGP RESTART for the main
recovery.
I-stream, or while handling a check-stop condition, the
check-stop handler could not perform a SIGP RESTART for the
main-I-stream.
System action: Perform an initial program load (IPL) with
464 TPF Messages (System Error, Offline, and Program Status Word)
000A0000 00DEAD08 • 000A0000 FFFFFFFC
the CLEAR option to recover from this disabled wait state. User response: None.
466 TPF Messages (System Error, Offline, and Program Status Word)