Includes equipment, appliances, pressure vessels and implements, including components of plant, fittings, connections and accessories to plant.
PLAN AND PREPARE
Prior to accepting static plant of potential high risk (eg. tower crane, personnel hoist etc), the Workplace Manager shall ensure that a design survey is carried out by a responsible person to determine its conformity to the manufacturer’s design. Any deviation in design must be supported by an Engineer’s Certification and/or statutory approval pending legislative requirements. HAZARDS Plant with moving parts should be designed to eliminate risk. Moving parts should be adequately The Workplace Manager shall ensure that static plant including scaffolding, hoists, tower cranes safeguarded so as to minimise the risk of contact that could result in an injury. etc which are required to be erected at the workplace is certified upon completion by a Hazards to be considered include: responsible person to the required standard using the “Static Plant Certification Report” or other auditable system such as “Scaff-Tag”. Energy sources (isolation) Static electricity (potential build up) Fire (overheating and by products) Noise (emissions) Vibration (transmitted) Radiation (accumulative over time) Release of substances (harmful) Stability (unexpected movement)
Each time that work is performed on static plant, re-certification shall be carried out by the You should adopt a risk management approach to confirm that the risks to Health & Safety are responsible person using the “Static Plant Certification Report”, or similar prior to its use. controlled and incorporated into the plant design. APA YANG DIMAKSUD DENGAN PERALATAN YANG STATIS? JENIS LAIN DARI PERALATAN YANG STATIS Termasuk perlengkapan, peralatan, pressure vessels dan implemennya , termasuk componen plant, fittings, connections dan assessoris untuk plant.
PERENCNAAN DAN PERSIAPAN
Sebelum menyetujui penggunaan static plant yang mempunyai potensi bahaya yang tinggi ( mis. Tower crane, personnel hoist etc),Manajer Tempat kerja harus memastikan telah dilakukan survei desain oleh orang yang bertanggung jawab untuk menentukan kecocokannya dengan desain yang dibuat oleh pabrik. Ketidaksesuaian pada desain harus didukung oleh Sertifikasi BAHAYA Engineer dan/atau persetujuan perundang-undangan. Plant dengan bagian yang dapat bergerak harus dirancang untuk mengurangi resiko, dan harus ditutupi untuk mencegah resiko kontak yang dapat berakibat cidera. Manager tempat kerja memastikan static plant termasuk scaffolding, hoists, tower cranes dll yang Bahaya yang harus diperhatikan a.l.: akan dipakai telah diujikan layak pakai dengan menggunakan “Laporan Sertifikasi Static Plant” oleh orang yang bertanggung jawab atau sistem audit lainnya seperti “Scaff-Tag”. Sumber energi (isolasi) Listrik statis (potensi yang timbul) Terbakar (terlalu panas dan barang itu sendiri) Kebisingan (emisi) Vibrasi (pindahkan) Radiasi (dihitung setiap saat) Bahan yang dikeluarkan (berbahaya) Stabilitas (gerakan yang tidak diinginkan)
PEMERIKSAAN / PERAWATAN SECARA PERIODIK PENGATURAN RESIKO
Setiap selesai menggunakan static plant, harus dilakukan sertifikasi ulang dilakukan dengan Terapkan pendekatan pengaturan bahaya untuk menerangkan bahwa bahaya terhadap menggunakan “Laporan Sertifikasi Static Plant” yang dilakukan oleh orang yang bertanggung Kesehatan dan Keselamatan desain plant telah terkendali. jawab.