Академический Документы
Профессиональный Документы
Культура Документы
Name: ID:
Please solve question another page as attachment and fill correct answers on this page.
Q-2 Please calculate volume properties for these string and fill table given below?
DC 9½ 3
DC 8¼ 2 7/8
DC 6¾ 2¾
DP 5 3¼
DP 5 7/8 4¼
LS 6 5/8 5
1
PETE 422 Homework#1
Name: ID:
Q-4 Calculate capacity / displacement / wet capacity for string given below? (Use calculated
values given in Q-2).
8 ½ Bit 0
6 ¾ DC 50
9 ½ Reamer 0
6 ¾ DC 250
5 DP 3000
5 7/8 DP 2750
Q-5 As per configuration given previous questions, calculate annular volume and string
volume? Calculate displacement time and stroke count from surface to surface and
bottom to up (3 MPs & 75 spm/each)?
Annular Volume
Drillstring Volume
Surface To Surface
Bottom To Up
2
PETE 422 Homework#1
Name: ID:
Q-6 If MW is 12.5 ppg and frictional pressure loss is 0.2 psi/m, calculate followings:
Static Bottom Hole Pressure_____________ psi
Dynamic Bottom Hole Pressure_____________ psi
Equivalent Circulating Density (ECD) _____________ ppg
Q-7 If there is a 25 bbl of water influx and not detected and circulate to surface, calculate
static pressure and influx length after got influx and top of influx at surface (Influx 9 ppg).
Q-8 Calculate equivalent mud weight of top of gas reservoir? (Top of gas 3000 ft, pay zone is
200 ft, gas gradient 0.15 psi/ft, Bottom of reservoir is normal hydrostatic gradient).
Q-9 Calculate surface volume of 5 bbl gas influx at pressure of 5000 psi. (BHT 180F, Ppc 650psi
Tpc 400R) (Assume Z at surface 1.0, Psurfce 14.7 psi and Temp 70F).
Q-10 Please calculate fracture gradient into salt and sand given equation below? (Assume
overburden gradient 1 psi/ft, Poission Ratio for Salt 0.45 Possion Ratio for Sand 0.33)
(Hint: Salt has no porosity and PP in sand is 13 ppg).
Fracture Gradient in Salt_____________ ppg
Fracture Gradient in Sand_____________ ppg