Вы находитесь на странице: 1из 2

UK

Radio Datasheet 7037 Kathrein 88 Deg Multiband VET Antennas


This datasheet is compiled and owned by Radio Engineering. Date of last update : 4 December 2008.

SUMMARY: This Datasheet defines the basic details of the Kathrein 88° beamwidth
GSM 900 + 1800 / UMTS Multiband antenna. Quantum code
88XV10V6MR20K (2.0m version) and 88XV7V6MR26K (2.6m version)

Target Audience Regional/Area Managers, Build Teams, Consultants and Contractors

Antenna Overview:
Antenna :
Kathrein, 88°, Dual polarisation, Multiband 900 + Wideband 1800
/ UMTS 4 port antenna.

Model Number:
800 10122 (2.0m version)
800 10123 (2.6m version)

Quantum code :
88XV10V6MR20K (2.0m version)
88XV7V6MR26K (2.6m version)

Supplier:

Kathrein UK Ltd.

Contact Ray Hollyman


Phone 07707 342000
e-mail ray.hollyman@kathrein.co.uk

Use:
This antenna is a replacement for the now discontinued Racal 85°
Dual band antenna, 85X4DF

This antenna is a 900 MHz + Wideband 1800 / UMTS and


therefore can be used for either GSM 900 + 1800 or GSM 900 +
UMTS operation. The antennas are available in both 2.0 and 2.6m
versions, with independent tilting of the GSM 900 and 1800/UMTS
bands. The antenna differs from the Racal antenna in that it is a 4
port antenna, GSM 900 on 2 ports, 1800 / UMTS on the second 2
ports. All connectors are bottom mounted. Space will be required
to mount MHA if deployed for UMTS, and feeder entry into
bottom of antenna and VET tilt mechanism.

All Kathrein antennas are supplied as manual tilt versions. Remote


operation will require the addition of 1 VET motor per band (i.e. 2
motors for this type of Multiband antenna) (See DS7186 for further
information)

Issue 1.2 4 December 2008 In Confidence Page 1 of 2


O2 UK Radio Datasheet 7037 Kathrein 88 Deg Multiband VET Antennas

Mechanical Characteristics
Version 2.0m (800 10122) 2.6m (800 10123)
Height (Antenna only) ............................. 2000mm 2717mm
Height (Inc. brackets and VET motor) .... 2200mm 2920mm
Width ....................................................... 262mm 262mm
Depth ....................................................... 171mm 171mm
Weight (Not including Brackets) ............. 27kg 33 kg
Wind loading ........................................... 640 N @ 42m/s 860 N @ 45 m/s
Tilt Mechanism ........................................ Manual by rotating knob at bottom of antenna, or remote by use of VET motor Part
Number 860 10025 (2 total required)
VET Cables.............................................. VET cables for these antennas are available from the following source:-
I.C.D, Unit 8/9 Bridle Close, Finedon Road Industrial Estate, Wellingborough,
Northants, NN8 4RN Contact: Jeff Smith Phone +44(0)1933 446464

Mounting Characteristics
Pole Mount .............................................. 2 mounts on 1967mm bracket spacing 2 mounts on 2717mm bracket spacing
Pole clamp kit part number 738 546 (2 off required) for 50 to 115mm diameter pole
Pole Mount if tilt function required......... Bracket kit part number 850 10007 required in addition to above pole clamp, 0 to 11° tilt
Wall Mount.............................................. Direct to wall mount. If mechanical tilt required, use 850 10007

Electrical Characteristics (2.0m Version 800 10122)


900 MHz 1800 MHz / UMTS
Operating Frequency Band ..................... 870-960 MHz 1710 – 1880 MHz 1920 – 2170 MHz
Azimuth Beamwidth................................. 88° 82° 90°
Elevation Beamwidth............................... 9.0° 5.5° 5.0°
Gain (Full Co-polar gain) ....................... 15.0 dBi 17.6 dBi 17.6 dBi
Gain (Odyssey Value).............................. 13.0 dBi 15.6 dBi 17.1 dBi
Electrical tilt............................................ 0 to 10° VET 0 to 6° VET
Front to back ratio .................................. >23 dB >23 dB
Polarisation............................................. Two linear, +/- 45° to the vertical Two linear, +/- 45° to the vertical
RF Terminations...................................... 4 x 7/16 DIN female. All connectors are bottom mounted, facing downwards.

Electrical Characteristics (2.6m Version 800 10123)


900 MHz 1800 MHz / UMTS
Operating Frequency Band ..................... 870-960 MHz 1710 – 1880 MHz 1920 – 2170 MHz
Azimuth Beamwidth................................. 88° 88° 88°
Elevation Beamwidth............................... 7.0° 5.5° 5°
Gain (Full Co-polar gain) ....................... 16.5 dBi 17.6 dBi 17.6 dBi
Gain (Odyssey Value).............................. 14.5 dBi 15.6 dBi 17.1 dBi
Electrical tilt............................................ 0.5 to 7° VET 0 to 6° VET
Front to back ratio .................................. >25 dB >23 dB
Polarisation............................................. Two linear, +/- 45° to the vertical Two linear, +/- 45° to the vertical
RF Terminations...................................... 4 x 7/16 DIN female. All connectors are bottom mounted, facing downwards.

END OF DOCUMENT
The author of this document is Dave Westrup, Radio Engineering. For any questions or issues, please contact the
Radio Engineering helpdesk on 01753 565882 or e-mail radio.engineering.uk@O2.com.

Issue 1.2 4 December 2008 In Confidence Page 2 of 2

Вам также может понравиться